Restore Deleted Task in Notification
Hi QM Experts,
Is it possible to restore the deleted task of QM notification ?
I can see the deleted task in change documents of notification but can not restore it ,
Regards
Sanjay
Dear Sanjay,
Deleted task cannot be restored. They needed to be assigned ans released for completion for task owner
Regards
Gajesh
Similar Messages
-
Do not allow to delete Task in QN when Task is completed
Hello Team,
Is there is any way I can't allow user to delete task in QN when the task is completed, because currently system allow to delete task even if task in completed.
Thanks
Bhavesh Patel1.Define status profile for task
SPRO>Quality Management>Quality Notifications>Notification Processing>Status Management>Define Status Profile>Maintain Status Profiles
You can create own status profile for task.
1-1.Check 'Task' for object types.
1-2.Define user status (example below)
Status-1-INIT-Initial-check 'Initial'-status change from 1 to 2
Status-2-COMP-Completed-status change from 2 to 2 then go to detail
1-3.Define transaction control for status-2-COMP
Click 'New entry'.
Check 'Allowed' and 'Set' for 'Complete Task'
Check 'Forbidd.' for 'Delete Task'
2.Assign status profile to notification type
SPRO>Quality Management>Quality Notifications>Notification Processing>Status Management>Define Status Profile>Status Profile for Notification Type
Now the user status will be assigned for new notification and you can prevent 'Delete task' for completed task.
Regards
Luke -
How to Restore deleted records in other table in oracle database 10g...
Hi All,
i want to restore deleted records of a particular table in other table
suppose:
i perform a query
delete from emp
where deptno =30;
now i wont to restore deptno=30 records in other table, let say in emp1 table
can any one let me know how to do it?
Thanks..This is what flashback query is for:
orclz> conn scott/tiger
Connected.
orclz> select count(*) from emp;
COUNT(*)
14
orclz> delete from emp where deptno=30;
6 rows deleted.
orclz> commit;
Commit complete.
orclz> create table deleted30 as select * from emp as of timestamp(systimestamp - 5/1440) where deptno=30;
Table created.
orclz> select count(*) from deleted30;
COUNT(*)
6
orclz> -
My iphone 3g is getting really slow. I done full restore ,deleted most apps . Not many photos in my album. i have no videos on my iphone. When taking photo with my iphone it takes ages for camera to open up. Very slow to take photo. Any suggestions? Please help !!!!
Thank you very much for your reply gdgmacguy :) I did all you suggested apart from restore as new device . Didn't know I could do that . After restore I did restore from back up only, as I didn't want to end up without contacts details on my phone. If I restore as new device how do I get my all contacts? Still will have to use back up? Sorry if it sounds like I don't know what i am doing, i just have no one to ask who would know. Thank you
-
What are the attributes available on Task Status Notification?
Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread SubjectHi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman -
Deleted PO Approval Notification Accidently, now cant approve Draft. (2007)
My Customer accidently deleted an approval notification. The PO displayes in the Document Drafts report, but when the user drills down into the draft to add it, they get a message: "An authorization for this document has allready been sent. Document can not be added unless this authorization process is completed."
I have two users who can approve this documet, with a required segnature of 1 user.
Any suggestions?
thanksHow? That was my question. How do you get an approval message back after your accidently deleted it.
The answer below helped. I wasnt awar the entering user could go into the Send portion of the Message / Alert overview window, and re-send the message.
Thank you for your response, and taking the time to help!
Sincere regards,
Mike -
How to restore deleted playlists
how to restore deleted playlists...my "trash" apparently use the playlist name
Immediately use the command Edit > Undo Delete.
-
Pdf email attachment for human task detail notification
We have a human task detail notification with pdf attachment.
The email notification (generated automatically) flat out all content but no pdf attachment.
Is this supported and if yes how to make it work?You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else. -
Is there any way to restore deleted photos on ipad2?
Is there any way to restore deleted photos on ipad2?
Easy. Connect to your computer and use the backup that had been created by iTunes.
-
Any way to restore deleted record from VBAP table.
Hi Guru,
Is their any way to restore deleted record from vabp.
Back is taken but , All quality server back is taken, any way to restore only
deleted VBAP data from all Back.
Regards
DurgeshHi Sahu ji,
you will not be able to get those records.
Check this : If this issue is in Development than no need to worry.
If in quality and production , then usually a copy of the system is there , and this can help you.
Also , check is there any report that exports this data in some other form for backup.
Hope it help you. -
Why no native restore database task in SSIS Toolbox
Hi,
I'm a little confused as to why there is no "Restore Database Task" in the SSIS Toolbox when editing a package in BIDS/SSDT?
We are provided with a native "Back Up Database Task" but no corresponding restore component. Searching the web shows that most developers are using "Execute T-SQL Task" to restore a database, which is fine.
But why have half the a solution to the backup/restore activity in the toolbox?
Thanks,
GaryHi Gary,
this is a user forum, not Microsoft SQL Server/SSIS developer's team forum or so.
If you have a suggestion then file it under the suggestions area of
MS Connect.
In my view having the restore via Execute SQL Task suffices.
Arthur My Blog -
Tasks email notification...
When I create a task,the tracker and the person to whom the task is assigned should receive an email notification.
But the email is not generated.
Could someone please tell me what the problem could be?
Thanks in advance,
Sudha.Hi,
I have done the following:
1.Workflow Engine Settings for Tasks or notifications:-
System Admin/ System Config / Workflow /Engine
2.Email Notificator Service:-
System Admin/ System Config / Knowledge Mgmt/ Content Management/ Utilities / Channel Originators
3.Email Channel SMTP configuration:-
Go to System Administration->System Configuration->Knowledge Management->Content Management-> Utilities -> Channels -> Email Channel
This works in Dev and QA.But does not work in production.
Could it be that the SMTP server might be accepting emails from Dev and QA and not from the production?
Thanks,
Sudha. -
Delete old KM notifications in UWL.
Hello All,
We want to delete old KM notifications in Portal UWL. These notifications are approvals and subscriptions setup on various KM folders which appear in the UWL under notifications tab. Can someone advice if there is a way we can delete these notifications.
Thanks in advance.Hello Kalpana,
The Notification Cleanup report is probably better for you so in this scenario:
http://help.sap.com/saphelp_nw70/helpdata/en/46/f9b96a13ba2ecbe10000000a11466f/content.htm
You can enter multiple users, groups or roles when creating the report.
Kind regards,
Lorcan. -
Reminder email notification and task assignment notification from humantask
Hi All ,
We have developed a 3 level approval SOA composite which sends the 1st level approval to a Manager and once Manager approves the request, the approval task is assigned to a 2nd level approver role(Group) for approval and after the approval from 2nd level approver group , the approval task is assigned to a 3rd level approver group .
After the request is submitted and the task is assigned to Manager for approval. Manager receives a task assignment notification (defined in the notification tab of the .task) and a reminder notification is fired after X hours of the task assignment. The issue is, the assignment notification and reminder notification are same, is it possible to send different notification on task assignment and a different notification on reminder.
Appreciate your help on this !
Thanks
surenThe default email solutions in planning are using workflow or task lists, though the task lists are based on due dates.
If you wanted a solution where an email is sent out when a task list is complete, then one route could be to have a business rule attached to a task list and then the business rule uses a custom CDF to send out email notication.
If you are interested in sending emails from business rules then I did write a blog on the subject a while back.
Cheers
John
http://john-goodwin.blogspot.com/ -
when my ipod is in recovery mode, will a restore delete my data...pictures, video..etc.
RahullikThe post is over a year old.
Your statement
Don't worry about that. iPod stuck in recovery mode always happens when you update the iOS on your iPod. There are two ways to solve it.
Is wrong
Maybe you are looking for
-
When I receive an invitation from galleries etc. with an image on it and I want to forward it, the image converts to a jpeg or something else rather than leaving the invitation as I received it. Is there any way that I can forward something with an i
-
HI All, I am using the Data Template to publish output. Based on Data Template.xdo <?xml version = '1.0' encoding = 'utf-8'?> <report version="1.1" xmlns="http://xmlns.oracle.com/oxp/xmlp" defaultDataSourceRef="CNE1"> <title>Based on Data Template</t
-
Adobe Acrobat 9.5.5 Merging Word Files
When I try to merge or (combine supported files in Acrobat..) I get an error, Create Adobe PDF - Missing PDFMaker FIles. Do you want to run the installer in repair mode. Attempted the following to fix the issue without luck... I have tried to run the
-
This feature that helps to block ad and social network tracking appeared on the last update, it had a green drop down where I could then get a screen showing the number of tracking that are blocked, not blocked and could block the ones that weren't.
-
Is it possible to reset agg function row_number()
Hi I am having a little trouble with aggregate functions. In this scenario an item always has a slot for each period. Periods are sequential. What I want is that if an item changes slot, the number of periods in slot resets to one even if it has been