Restore SQL 2012 Server

I have two sql 2012 servers in a cluster. If one of my servers, has to be rebuilt from scratch like reload os, sql server 2102, what is the best way to do this and get the server back in the cluster.

Hi Gerald,
Based on my understanding, you are going to rebuild a server that participated in a two-node SQL Server failover cluster.
From my point of view, you can remove the SQL Server cluster node (assume it is Node 1) firstly, then add it to the existing SQL Server failover cluster again. The basic steps are as follows.
1. SQL Server Failover Cluster Instance (FCI) fails over to Node 2 after Node 1 fails.
2. Evict Node 1 from the FCI. To do this, from Node 2, open the Failover Cluster Manager snap-in, right-click Node1, click Move Actions, and then click Evict Node.
3. Verify that Node 1 has been evicted from the cluster definition.
4. Install new hardware in Node 1.
5. Add Node 1 to the existing cluster using the Failover Cluster Manager snap-in. For more information, please review this article:
Before Installing Failover Clustering
6. Ensure that the administrator accounts are the same on all cluster nodes.
7. Add Node 1 to the existing FCI by running SQL Server Setup. For more information, see
Add or Remove Nodes in a SQL Server Failover Cluster (Setup).
Reference:
Recover from Failover Cluster Instance Failure:
http://msdn.microsoft.com/en-us/library/ms181075(v=sql.110).aspx
Failover Cluster Troubleshooting:
http://msdn.microsoft.com/en-us/library/ms189117(v=sql.100).aspx
Thanks,
Lydia Zhang

Similar Messages

Migration of the database from Microsoft SQL 2014 Express to Microsoft SQL 2012 Server

I posted a similar thread yesterday, and I realized that there was a serious typo.
Link: https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b3e201ea-6c7c-43a4-8908-842b714ea451/migration-of-the-database-from-microsoft-sql-2014-express-to-microsoft-sql-2012-server?forum=sqlservermigration
Therefore, I made a decision to post another thread right now.
I am
writing to ask if there are any known issues when migration from MS SQL 2014 Express to MS SQL 2012 Server version. Are there any step-by-step instruction on how I can go about doing this?
Looking forward to your response. Thank you for your time.
Regards,
Jeff Yoo

Hello,
SQL Server 2012 setup program won’t allow you to perform a downgrade from SQL Server 2014 Express Edition. Backup/Restore
and Detach/Attach won’t help you either.
One option you have left is using SQL Server Import/Export Wizard as explained on the following article.
http://www.mytechmantra.com/LearnSQLServer/Downgrade_SQL_Server_Database_P1.html
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Multiple dev environments of CRM 2011 on one SQL 2012 server

Hello,
I have requirement to install multiple development servers of CRM 2011 which would use one SQL 2012 Server.
As you know, you need separate CRM 2011 Reporting Extensions, which means that Reporting Services (SSRS) should be installed not in SQL 2012 server but in the same server as CRM 2011. For SSRS (on CRM 2011 server) I want to use SQL 2008R2 Express (licensing
issues).
Is it possible to use SQL 2008R2 Express only for SSRS, while CRM 2011 is using SQL 2012 on different server?
I get errors while creating organization:
System.Web.Services.Protocols.SoapException: The feature: "Customizing security roles" is not supported in this edition of Reporting Services.
Environment information:
CRM 2011 on Windows Server 2008 R2. In the same server SSRS 2008 R2 on SQL 2008 R2 Express
CRM database in different machine with SQL 2012 on Windows Server 2012.
Regards,
Jonas

SQL Express is not supported for Dynamics CRM. Plus, the only way to have completely separate installations of Dynamics CRM pointing to one server for SQL is to used named instances of SQL Server on the Windows server you're installing SQL.
So you literally would have to install SQL multiple times on that one box.
Instead of going through all that effort, why not just install Dynamics CRM once, and then make multiple CRM deployments using the CRM Deployment Manager? You can make as many CRM environments as you need with a single install of Dynamics CRM. This works
great in dev environments where you need multiple instances for multiple devs. Plus, it gives you exactly one point of administration when it comes to the CRM install, and is a lot more supportable.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

Down grade SQL 2014 to SQL 2012 server

Hi,
I have purchased SQL 2014 paper license but I want to use SQL 2012 server can we use same licensing for SQL 2012. Can we downgrade the SQL 2014 to 2012.
Thanks & Regards

Hello,
yes, you can downgarde you r SQL Server 2014 to 2012 Version. for Customers who have licensed software through a Microsoft Volume Licensing program are eligible to use prior versions of the software edition that they have licensed. This is known as
a downgrade right.
In general, the
Volume Licensing Service Center (VLSC) provides download access only to the current (N) and the last (N-1) version of products(2014, 2012). however, as of December 2012, a limited set of N-2 and N-3 prior product versions remain available for download through
the VLSC. for SQL Server you can also downgrade to 2012, 2008 R2 and 2008.
Note: In addition to VLSC download software access, Volume Licensing customers can order physical media (CD/DVD) copies of their licensed software through the VLSC.
if you purchase your SQL Server as FPP(BOX) product, you can also downgrade it to 2012 but you Need to have the media + key product of 2012 Version.
thanks
diramoh

Point Imaged/Cloned Sharepoint 2010 to different/renamed SQL 2012 server - what needs to be changed/edited?

Newbie here... I am using our development VM's one has SP 2010 installed/working and configured and the other is SQL 2012 housing the DB's for the working SP sites and a third running IIS and hosting the pages. I want to use clones to copy to additional
VM's, rename the SQL and rename the SP 2010 (the IIS will stay the same just add the cloned site to it. MY question is "Is there an automated way of reconfiguring SP 2010 to point to the new SQL server? (I've already figured out how to change the SID
information and run the queries on the SQL, just need info on the SP 2010 part.)
Thanks,
Jon P.

You can't do this, don't try it. For VM purposes, SharePoint does not support:
Time Sync
Snapshotting/Checkpoints
VM Backups (e.g. SAN-based or VMDK/VHD-based backups)
You will cause problems doing what you're attempting to do, unless you isolate these VMs onto a new network that has no access to the production network -- in this case, you would also need a copy of one Domain Controller from production, as well.
Best bet is to build a new farm and restore content to it via content database/service application database restoration.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Fulltext search of binary files outside of database in SQL 2012/Server 2012

This may be more of a Windows Server 2012 question but I'm not sure.
I have a system that holds large amounts of binary files (pdf, doc, etc.). The files themselves are held outside the database in a folder and a SQL table holds the metadata. I used the Indexing Service available through Windows Server 2008 to
create a catalog called "EFCATALOG" to index the contents of the external folder, then created a linked server called MYIDXS which allowed me to query that external indexing catalog from within SQL with a query like this:
EXEC sp_addlinkedserver MYIDXS, 'Internal App', 'MSIDXS', 'EFCATALOG'
SELECT * FROM MYDOCS
LEFT JOIN OPENQUERY(MYIDXS,'SELECT FILENAME FROM SCOPE() WHERE CONTAINS (''test'')') AS MYTBL
ON MYDOC_FILE_NAME = MYTBL.[FILENAME]
With Windows Server 2012, I'm missing the functionality to create the indexing service catalog. I've added the Windows Search Service and see how I can configure folders for searching, but there is no naming functionality for this and I don't see how
I can get the above query/structure to work in Windows Server 2012/SQL Server 2012 environment. In fact, there isn't much at all online regarding the search service or the relationship back to the older versions in 2008 and before.
Is there any way to continue this structure in 2012? I would like to avoid recoding my application to work with a different structure. I'm afraid that changing everything to work with the FILETABLE/FILESTREAM functionality added in SQL 2012
will be necessary which is fine long term, but not convenient right now.
Thanks in advance for any suggestions/help.

Thank you Fanny Liu, based on your link the syntax has changed dramatically. I need to query SYSTEMINDEX now and the structure is very different. It still seems that this new syntax requires creating a linked server of a different type.
I've tried:
EXEC sp_addlinkedserver @server = 'TEST', @provider = 'Search.CollatorDSO.1', @datasrc = 'SYSTEMINDEX', @srvproduct = '', @provstr='Application=Windows'
SELECT FileName FROM OPENQUERY("TEST", 'SELECT Filename FROM SYSTEMINDEX')
Msg 7302, Level 16, State 1, Line 1
Cannot create an instance of OLE DB provider "Search.CollatorDSO.1" for linked server "TEST".
I've also tried using just "Search.CollatorDSO"as the provider since that is the provider name listed in management studio but basically the same error comes back.
So I have 2 questions:
1) Is it possible for my original process to work in Windows Server 2012 in any way (meaning that the OPENQUERY example I provided can remain relatively unchanged)?
2) If change is necessary using this new SYSTEMINDEX and linked server combination, why is my linked server definition failing? I'm using SQL Server 2012....Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
Thank you.

Sql 2012 server for SCCM 2012 - Agent not starting

Hi ,
In our environment we have a Sql 2012, and it was working fine till now. but after installation of RDP role and subsequent installation of certificates for remote desktop in the SCCM server ( SQL 2012 is
installed in it)
we are facing the issue - Sql server management studio not connecting ( windows authenticaltion)
1) A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)A
2) I tried starting the sql agent service in services.msc and the below error came
The SQL Server Agent (MSSQLSERVER) service on Local Computer started and then stopped.
Some services stop automatically if they are not in use by other services or programs.
3) In the Sql Server configuration manager also tried starting the sql agent but
The request failed or the service did not respond in a timely fashion.
Consult the event log or other applicable error logs for details.
The widows event logs show this error
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection.
The TLS protocol defined fatal error code is 20. The Windows SChannel error state is 960.
We have removed the certificate and the RDP role in that .
Can anyone please help on this
Anand M

I would check for error messages in the SQL Server ERROLOG file and also Agent's SQLAGENT.OUT file.
Tibor Karaszi, SQL Server MVP |
web | blog

Add login to sql 2012 server for a virtual account from another sql 2012 server

I have two sql 2012 servers.
Server A has sql server agent running virtual account: NT Service\SQLSERVERAGENT
Server B has some databases.
Server A is running a scheduled SSIS package that needs access to Server B's databases via Windows Auth
Thus I want to grant access by creating a login on Server B to the virtual account on server A: NT Service\SQLSERVERAGENT
Q1 - Is this possible?
Thanks beforehand.
Paulino

Raul,
As a matter of a test and not with the actual intention to use it this way, I did try to add a login using the DOMAIN\MACHINE_NAME$
concept but it did not work anyway. I will not find it.
So I will use one of the approaches recommended by Mr. Gallardy
Thanks!
Paulino

VS2012 Wont Connect to SQL 2012 Server Location

When I attempt to connect to a SQL 2012 Instance, VS2012 crashes. I can connect fine using SQL Management Studio to the SQL 2012 instance, and my VS2012 connects no problem to my SQL 2008 R2 Instances.
Any suggestions?

Hello,
Have you applied Update 4 for VS 2012?
http://www.microsoft.com/en-us/download/details.aspx?id=39305
Could you try to reset VS settings?
Devenv.exe /ResetSettings
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Cannot drop orphaned account on my SQL 2012 Server

Hi all,
I have a terrible issue that I am not able to solve by myself. I have made a lot of research on internet but I still not found a valid solution for the problem.
All is happened when a server crashed some weeks ago and it was removed from my network.
After that, under my SQL Server 2012 I get an orphaned account which cannot be removed. This account is a computer account related to an old SCOM installation.
If I try to execute the command DROP USER [NETWORK\SERVERNAME$] I get the following error message:
The database principal has granted or denied permissions to objects in the database and cannot be dropped.
Msg 15284, Level 16, State 1, Line 1
The database principal has granted or denied permissions to objects in the database and cannot be dropped.
But if I run the following command to know all permission granted to the account, I get an empty result:
select * from sys.database_permissions where grantee_principal_id = user_id ('Network\SERVERNAME$');
Furthermore, following the instructions provided by the official KB for troubleshooting orphaned users, I get another error (http://support.microsoft.com/kb/274188/en-us).
sp_change_users_login 'update_one', 'Network\SERVERNAME$', 'Network\SERVERNAME$'
Msg 15291, Level 16, State 1, Procedure sp_change_users_login, Line 114
Terminating this procedure. The User name 'Network\SERVERNAME$' is absent or invalid.
The only thing I can retrieve is 15 permissions that this account granted to another account in the past:
select *
from sys.database_permissions
where grantor_principal_id = user_id ('Network\SERVERNAME$'
class class_desc
          major_id
minor_id    grantee_principal_id grantor_principal_id type permission_name
state state_desc
17    SERVICE
65538       0
5
19
SN   SEND
                                                            G
GRANT
And more 14 similar rows…
Anyone can help me to resolve my issue and safe delete the account SERVERNAME$? I need this because I have to reinstall SCOM with the same computer name on another server, but installation fails due to this behavior.
Thanks to all in advance.
Marco

DECLARE @service_name sysname,
@username    sysname
SELECT @service_name = name FROM sys.services WHERE service_id = 65538
SELECT @username = name FROM sys.database_principals WHERE principal_id = 5
DECLARE @sql nvarchar(MAX) = 'REVOKE SEND ON SERVICE:: ' +
   quotename(@service_name) + ' FROM ' + quotename(@username)
PRINT @sql
EXEC(@sql) AS 'Network\SERVERNAME$'
In case you did not get it, the issue is not that the account has been granted permssions, the issue is the account itself has granted permissions.
Since the SEND permission may actually be needed for @username, it's a good idea to look at the command and re-grant the permission, but now as dbo.
If you have more of them, Sebastian Meines script to get commands for database permissions is really nice. You would need to add a filter for grantor_principal_id.
Erland Sommarskog, SQL Server MVP, [email protected]

Gracefully Shutdown Virtualized SQL 2012 Server on Battery (UPS) Power?

I have a VMWare ESXi 5.1 environment with a 2012 R2 SQL Server that hosts all of our databases and functions as the Report Server. I am the only on-site IT person and as such am responsible for database administration. I have done a lot of reading on database corruption and have determined that a hard shut down will very likely cause issues. We have a UPS, but I wantto be prepared for the worst case scenario.
We work with an MSP for high level networking issues and I have been requesting help with this for several weeks to no avail. I have been told a hard shut down will not negatively effect my SQL Server (this individual has virtually no SQL experience).
Can anyone point me in the right direction? This is keeping me awake at night!
This topic first appeared in the Spiceworks Community

Is this what you are talking about?
http://www.sophisticated.com/products/powerkey/pkp_650.html

Report service Integration (sql 2012 and SharePoint 2013) error Report Server WMI Provider error: Invalid namespace

Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.

Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Adding existing SQL Server 2012 to a New SQL 2012 Cluster

We currently have a SQL 20012 Server setup and running on our domain. We would like to switch this to a clustered environment. Is it possible to setup the new SQL 2012 Cluster and add the existing SQL 2012 server as a node in the cluster
without losing any functionality. All servers will be built with same drive letter.

We currently have a SQL 20012 Server setup and running on our domain. We would like to switch this to a clustered environment. Is it possible to setup the new SQL 2012 Cluster and add the existing SQL 2012 server as a node in the
cluster without losing any functionality. All servers will be built with same drive letter.
No its not possible to convert standalone installation to cluster.Moreover first you need to configure Windows cluster then backup all SQL server databases logins jobs packages and install fresh instance of SQL Server in cluster aware mode
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

DPM 2012 SP1 and SharePoint 2013 on a SQL 2012 AlwaysOn AG

I am trying to protect a new SharePoint Foundation 2013 farm with it's databases stored on an SQL 2012 AlwaysOn Availability Group. I've run configureSharePoint.exe -EnableSharePointProtection on my WFE and SharePoint shows up in DPM when I try to
add it to a protection group. But I get the 32008 referenced here: http://support.microsoft.com/kb/970641 when trying to select the farm to back up.
If I run ConfigureSharePoint.exe -resolveallSQLAliases on the WFE it doesn't return anything.
I'm directly backing up databases on the SQL 2012 server, but not any of the SharePoint DBs.
K

Hi,
I'm having some trouble understanding what I'm seeing in the writer output from the WFE server. Specifically the machine names that the writer is reporting.
If you look in the wfewtiters.txt, What is the machine that ends in 02 ? Is that a physical machine or an alias ?
The machine ending in 06 is the Secondary SQL Server and that is what the Sharepoint writer is pointing to.
The WFE VSS Sharepoint writer shows this for two content DB’s
* WRITER "SharePoint Services Writer"
  - Writer ID   = {da452614-4858-5e53-a512-38aab25c61ad}
  - Writer instance ID = {c0c46d7b-1c01-44bd-8353-e3433f5b8f07}
  - Supports restore events = TRUE
  - Writer restore conditions = VSS_WRE_ALWAYS
  - Restore method = VSS_RME_RESTORE_AT_REBOOT_IF_CANNOT_REPLACE
  - Requires reboot after restore = FALSE
  - Excluded files:
+ Component "SharePoint Services Writer:\XXXX02\WSS_Content_at.contoso.local"
- Name: WSS_Content_at.Contoso.local
- Logical path: XXXX02
- Full path: \XXXX02\WSS_Content_at.Contoso.local
- Caption: Content Database WSS_Content_at.Contoso.local
- Type: VSS_CT_DATABASE [1]
- Is selectable: TRUE
- Is top level: TRUE
- Notify on backup complete: FALSE
- Paths affected by this component:
- Volumes affected by this component:
- Component Dependencies:
- Dependency to "{a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}:\\YYYY06\YYYY06\WSS_Content_at.contoso.local"
                                + Component "SharePoint Services Writer:\XXXX02\WSS_Content_fw.Contoso.local"
- Name: WSS_Content_fw.contoso.local
- Logical path: XXXX02
- Full path: \XXXX02\WSS_Content_fw.Contoso.local
- Caption: Content Database WSS_Content_fw.Contoso.local
- Type: VSS_CT_DATABASE [1]
- Is selectable: TRUE
- Is top level: TRUE
- Notify on backup complete: FALSE
- Paths affected by this component:
- Volumes affected by this component:
- Component Dependencies:
- Dependency to "{a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}:\\YYYY06\YYYY06\WSS_Content_fw.contoso.local"
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Upgrade Process from SQL 2005 to SQL 2012

Hi All,
I have gone thru multiple threads and would like to understand some steps in detail for me to upgrade SQL 2005 to SQL 2012.
Below is my understanding and questions around it, I would be setting up a new environment with OS 2007/2008 with SQL 2012:
Environment Readiness - Ensure new environment is ready with Win 2007/2008 with SQL 2012 Server
Run Upgrade Advisor on the new environment and point to SQL 2005 instance
Find the breaking/discontinued changes to be done before or After Upgrade
<Question>: Over here I would like to know what should be our approach to make the required changes
<Question>: Obviously I should not be making changes directly on the Production SQL 2005 server, then in that case should I take a backup/restore on the new SQL Server 2012 and then make the required changes to the database objects
like (Table schema(changing column names/datatypes etc.), Stored Procedure, Functions & Views)
<Question>: When I do a backup/restore I would also get the data along with it, so is this a recommended approach or should we only run/use the table schema creation scripts, fix the issues identified by UA and then do an Table to Table import,
any thoughts on this ?
<Question>: If I have to do a table to table Import then I should ensure there's a downtime during the Import or would I have any other better approach
So, basically my questions are around the approach of fixing the issues identified by UA and moving the database to SQL Server 2012 environment, I have around 300 databased to me upgraded.
Please do let me know what should be a good/proven approach ? Pl. do let me know if you would need any more details from me.
---Umesh

Thanks all for the replies.
I am trying summarize what I have understood here:
Document SQL Server 2005 environment details, Is there any tool which could give us all relevant details
I would take the backup from the SQL Server 2005 Production environment and then restore the same in a test environment which again has SQL Server 2005 and Run Upgrade Advisor on that
Probbaly run SQL Profiler as well to find out the deprecated changes to be done
I should fix all the breaking, discontinued changes on the Test system identified by UA
I should fix all the deprecated changes on the Test system identified by SQL Profiler
Steps 3 & 4 should give me the changed scripts for all database objects (i.e. Table Schema, Stored Procedures, Functions & Views)
<Question> Perform test, I understand this acitivity test can be captured by having SQL profiler running in the background on the SQL Server 2005 production environment where we can identify some days in a week or a month where maximum activity is
expected to ensure we cover most the scenarios, let me know is this approach looks fine or is there a better approach
Now, with regards to acutal upgrade I need to identify a time window where in less activity is done during which I could have a downtime for the actual SQL Server 2005 production environment
Post downtine, I should do a BackUp for all databases from SQL Server 2005 production environment
Test on environment readiness of SQL Server 2012 can be compared against the documentation done as part of the first Step
<Question> Ideally I should a restore first in the new environment which has SQL Server 2012
<Question> Then run the Scripted changes where we fixed all the breaking, discontinued & deprecated changes
<Question> Does above sequence of Step 9 & 10 make sense or is there a better approach of doing it
<Question> Post Upgrade and running of changed scripts, I should run the Upgrade Advisor again and see if everything looks fine
<Question> Perform test again which we ran on SQL Server 2005 Test environment
<Question> These steps should complete the Upgrade process.
Please do let me know if the above sequence look ok to all of you and does it really work in a practical scenario, do let me know your feedback or any change in sequence/process or any other tools that can be used here.
Thanks Again ...

Restore SQL 2012 Server

Similar Messages

Maybe you are looking for