Restoring a book that was created in Lightroom 4

Hi All,
I had created a book in lightroom 4 and having created a pdf had moved the images folder to an external hard drive. Now i want to make some edits given that the print had some color issues. I see the page layout but with the same folder back in the same location from where i had created the book, i still cant get it to populate the images in the book. Any thoughts on where i can look to see what folder was used to pick images for the book? Any meta data that may have some information on what can bring the images back on the book? Currently i see the correct number of pages in the book but they are all blank.
Thanks in advance for all your help.
Regards
Uday

Sure Pieter, here is the original CS2 file
and a PDF of some pages (you can scroll through the file and see what the PDF corresponds to so you can see the arrow directions).
The fonts are Futura Std and Wingdings 3 OTF
Hope you can figure it out from this.
Thanks for any help you can give.
Best,
Joyce

Similar Messages

Does adobe muse support flash that was created with lightroom

does adobe muse support flash that was created with lightroom

I suspect your PhoneGap app was flagged as running on both iPad and iPhone. You'll need the same from DPS. You can do this in AppBuilder at the start of the wizard where it asks what kind of devices you want to support. Note that this is only available to DPS Professional and Enterprise customers. If you are a Creative Cloud customer building a Single Edition application it will only support iPad.
Neil

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?

While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?
Originally I was running Mountain Lion as an UPgrade from Lion. I created a backup in Time Machine, performed a clean install of Mountain Lion, then I proceeded to use Time Machine to restore the back up.
When thinking about the essence of a back up restore, it occurrs to me that for all I know, I may have just wated my time IF Time Machine also restores all the old unneeded files that remain from Lion after an upgrade.
Since the backup was made while running Mountain Lion as an upgrade from Lion, did restoring this backup defeat the purpose of a clean install by reinstalling old Lion files?
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
-Chris

Hello John!
Thank you for your response which solved my problem. For other users who may stumble upon this, I'll clear up the confusion and share how I solved the problem with your help; When looking for answers to my computer problems, finding unresolved questions where person B offers a solution and person A never comes back and says "That worked, thank you.", it demonstrates a "k-thnx-bye" user mentality that leaves others with the same problem lost. Without further ado:
It is not clear what you did because the meaning of "clean install" is vague. You can erase a volume and install an OS which leaves none of its previous content intact,
This is what I did: I erased the volume leaving no previous content intact, while then installing OS X Mountain Lion.
or you can upgrade an existing OS (or reinstall the same one) which does not alter your user - installed files.
An upgrade to Mountain Lion from Lion is what I started with initially before erasing anything. This was undesirable. Since this can cause Macs to run slower (especially whereas I'm using a mid-2011 Mac Mini), my goal was to go from operating within an upgrade to Mountain Lion, to operating within an installation of Montain Lion that was not preceded by any other oprating system.
Hence a "clean install of Mountain Lion while continuing with old apps and files" is confusing.
Well put and understood. What I should have said was:
1.Erase the volume
2.Install Mountain Lion clean
3.Confirm that Mountain Lion is functioning properly
4.Proceed to use either Time Machine or Migration Assistant to Import/Migrate/Copy over only two things; My old apps (That had been stored originally in the designated Applications folder) and all files and folders originally stored in the home folder under users.
If you restore from a Time Machine backup then all modifications that occurred subsequent to that backup become erased. It renders moot any OS X upgrade performed subsequent to that backup.
That makes sense and is just as I later suspected.
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
Yes.
This is what I did and everything works perfectly. Thank you so much once again!
-Chris

Is there a way to save a table in Photoshop (that was created in InDesign) without fuzzy text?

I am trying to save a table in Photoshop that was created in InDesign for web use. When I save it as a png (can't save as pdf or jpeg due to limitations with our company's website), the text appears fuzzy (pixelated?). Is this because the table is getting flattened/rasterized?
Is there a different adobe product that can be used to avoid this happening? The company who has built our website has a style editor that has limited capabilities. We have tried using the website's editor to create the tables; however, the editor lacks the flexibilty and user-friendliness that comes with InDesign. That is why we opted to create the tables in Indesign.
In order to upload the table into the editor, the file must be saved as a png, so that is why we are creating in InDesign and then saving the table in Photoshop.
Any ideas?
Thank you for the help!
Tracy

Thanks for your help!
Just to clarify, are you suggesting going through the export process while in Indesign? I did that and saved the table as an EPS file, then proceeded to open it, trim, and save as png in Photoshop. I noticed it lost it's white background when I reopened it in Photoshop; the table appeared with a transparent background (which isn't a big deal). When I uploaded the png in the website it doesn't appear to be as blurry, so that did help.
Thank you for the suggestion!

I entered new fields in a form that was created last year to update it. However, now when I view the responses, they are listed as Column 1, Column 5, etc. It doesn't show a label for the actual field when I view the responses. Can you please help?

I entered new fields in a form that was created last year to update it. However, now when I view the responses, the headings are listed as Column 1, Column 5, etc. rather than the name of the heading. Can you please help?

Hi Mike,
CRSE is an OEM Product and for use with a custom application they have written. Unfortunately we don't their reports or how they are connecting, it would appear they were originally built off a SQL and then set to a Dataset in the app or they could be adding the data source at runtime. Lots of variations and without access to the source code to see what they are doing not much we can help you with.
You need to contact the OEM Partner for help in resolving this and find out what you can and need to do to update your SP and work with their canned reports,
Thank you
Don

HP Pavilion dv6-6c29wm will not restore from disc that was made with HP recovery Manager

My HP Pavilion dv6-6c29wm will not restore from disc that was made with HP recovery Manager
Running Windows 7 64-bit on 650gb drive.
Error: "The system media does not support this computer. You are not able to restore this system with the media."
I'm about to order the recovery discs from HP and with any luck be able to bring this laptop back to factory conditionn with all the correct partitions and sizes after I format the hard drive.
This question was solved.
View Solution.

Yes our recovery disks will return your unit to the factory state. All the software that came with the unit will be reinstalled. Whatever you added you will have to reinstall.
I work for HP.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

Hello,
How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
I have tried several tutorials but these either:
- show correction in premiere sequence (which is not practical; given the huge number of files we have)
- or show the editing in audition of a sequence, not the clip.
We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes. there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time. since there is no dynamic link, its not possible to bring merged clips into audition.
Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

Will opening a pdf in version 8, that was created in version XI, automatically 'secure' the document?

Will opening a pdf in version 8, that was created in version XI, automatically 'secure' the document?

Thank you.

How to get the vendor number that was created using xk01..?

Suppose i am creating a vendor with all the information by using a bdc program.
In the same program if i want to go to the XK02 of that particular vendor that was created recently....how it possible..?
Means how to get that particular vendor number that was created recently...?

Hi...
You Can Get the Vendor number after Calling the Transaction 'XK01' as below.
Declare a table for Collecting messages :
DATA: T_MSG TYPE TABLE OF BDCMSGCOLL,
 WA_MSG TYPE BDCMSGCOLL.
Then Call Transaction Statment:
CALL TRANSACTION 'XK01'
 USING T_BDCDATA
 MODE 'N'
 MESSAGES INTO t_msg.
if sy-subrc = 0.
READ TABLE T_MSG INTO WA_MSG WITH MSGTYP = 'S'.
 MSGID = 'F2'
 MSGNR = '175'.
Note: Bcoz the XK01 will issue this message
if sy-subrc = 0.
write: / WA_MSG-MSGV1. "This will contrain Vendor Number
endif.
endif.
And you can also Try the Other method i.e. after the Call transaction statement
 GET PARAMETER ID 'LIF' field V_LIFNR.
WRITE:/ V_LIFNR.
Reward if Helpful.

Can't seem to change the Document Properties Advanced Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?

Can't seem to change the Document Properties > Advanced > Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?

LiveCycle forms use a very different approach to create a PDF form than Acrobat and that approach makes many features for processing PDFs non-functional.
You might want to ask this question in one of the LiveCycle product forums.

A Table that was created at Run time. A Row Properly Deleted from Table Is Still Present on Form with BindingNavigator

Hello
I have a dataset that was created at design time
but - after I run the app, it randomly creates a table based on The Users name
since I do not know the users name before had, the table is not part of my existing dataset
(I actually used an insert into sql nonquery to just make this table a copy of the masterUserTable)
Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
I thought I did so with this code:
'TODO: This line of code loads data into the 'MyLearningDBDataSet.masterUserTable' table. You can move, or remove it, as needed.
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
Dim ThisNewVariable As String = MyUserNameIs & "UserTable"
Dim ThisNewTableName As New DataTable
Me.MyLearningDBDataSet.masterUserTable.TableName = ThisNewVariable
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
that appeared to do the trick (but if it is incorrect please advice on the proper way to add a table made at runtime to a users existing datset)
Else where in my code I successfully execute the following NonQuery :
SqlString= "DELETE FROM " & MyUserNameIs & "UserTable" & vbCrLf &
"WHERE vState='" & txtStateInfo.Text & "';"
I check in Visual Studio 2013 that the row was deleted from the "GabrielUserTable" (Gabriel is the current value of MyUserNameIs) by using the Server Explorer and right clicking
on the table and choosing show talbe data
But the MyMainDBBindingNavigator is still showing the item I deleted.
So after searching for answers - I created a new button for testing and added the following code to test if it would work
Me.Validate()
Me.MyMainDBBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyLearningDBDataSet)
but the data is still shwoing after deleting it with my NonQuery
Please Help!

Hi genterprise,
>> Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
In my option, if you want to rebind the users table to the navigator, you need to set the BindingNavigator.BindingSource. Based on your description, it seems that you did not reset the datasoure of the MyMainDBBindingNavigator. It was the original datasource
of the masterUserTable. For more details about BindingNavigator.BindingSource Property. You could refer the link below:
# BindingNavigator.BindingSource Property
https://msdn.microsoft.com/en-us/library/system.windows.forms.bindingnavigator.bindingsource%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Why do vector lines appear different in my Photoshop document compared to the PDF that was created using "Scripts Layer Comps to PDF"? And how do I get them to look the same?

Why do vector lines appear different in my Photoshop document compared to the PDF that was created using "Scripts > Layer Comps to PDF"? And how do I get them to look the same?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Need to edit a form that was created by someone else.

Hello, I have to edit a form that was created by someone else. I made numerous changes to the text and repositioned a lot of the items, and it appeared fine on my computer. However, when I open it on my PC and other systems, the fonts are substituting and I'm getting strange characters where I changed the text. I tried embedding the fonts with the Preflight embed fonts, but it is still messed up. My client is anxious...not sure what else to check. Any help would be appreciated!

You don't need to re-do the fields. If you create a new version of the PDF
file just open the old one and use the Replace Pages command to insert the
pages from the new version over the old ones. This will give you a new
version of the file, with the existing form fields still in tact. Of
course, you might need to adjust their location and/or size, but at least
you won't have to start all over again...
On Thu, Jan 22, 2015 at 11:59 PM, Laura Holancin <[email protected]>

I have a file that was created in FH 11 and I am using same version.Originator opens file and everything is fine and also earlier version opens it fine.when I open it the links shift 1/8" up and left.Has anybody had this happen to them

I have a file that was created in FH 11 and I am using same version.Originator opens this file and everything is fine and also an earlier version opens it fine.When I open it it shifts the links 1/8" up and to the left.Has anybody ever had this happen to them?

What file format(s) are the "links"?
If raster images, do they contain clipping paths or transparency?
What is your platform and OS?
Were the FH documents created on the same platform (Mac or PC) as the one you are currently using?
Were the linked files created on the same platform (Mac or PC) as the one you are currently using?
Can you reproduce the problem with a newly created document and the same linked images?
There was once an issue with transparent 1-bit TIFF images shifting, but I believe that was in a previous version of FH.

Restoring a book that was created in Lightroom 4

Similar Messages

Maybe you are looking for