Restoring Time Machine from non-fusion drive to a Fusion Drive

I have a mid 2010 iMac (1TB HDD—before they had fusion drives) that I'm thinking of upgrading to the new iMac w/Fusion Drive because it's having hardware issues. I do a lot of development and have installed numerous packages and server configurations, of which I've been terrible at cataloging, so I'm hoping to simply do a full restore of the system from my Time Machine backup.
I've done Time Machine restores before, but I'm not sure if it will work properly. I think I remember reading (back when fusion drives came out) that time machine restores that originated on non-fusion drives can't be restored onto fusion drives. After doing a few searches I can't find reference to that, but I have this nagging memory of reading that at some point. Is this true? If I get a fusion drive will I need to start the system new? If so, will I be able to at least restore my home directory files?
Thanks!

A Fusion Drive won't behave any differently than you expect.

Similar Messages

  • Want to move time machine from a mac os external to larger drive?

    I have been reformatting a 120gb (ex-ntfs) external drive to "mac os external (journal) . I simply want to move the backup(s) to a larger external drive. I have moved 9000 mp3's over to my Mac and the backup drive filled up fast. Being a ex-windows user since pre-Win 3.11 I am kinda intimidated , more just ignorant to Mac but trying to reformat my brain the MAC way.... Is it as easy as this? New Time machine drive will be a 250gb external "copy" the "backup.backupdb" folder to new drive? and then tell TM to use the 250gb drive? doubt it can be that simple... but... the only dumb question is the one u don't ask.

    Here are the instructions to use Disk Utility for this:
    You can duplicate the current backups to a different disk via Disk Utility (in your Applications/Utilities folder). You cannot use the normal "drag & drop" with the Finder, as that won't copy their unusual structure properly.
    You can duplicate to a disk/partition of the same or larger size. You may be able to copy to a smaller one, but you might not. If the old (source) disk has ever been near full, the files may be scattered over it in a way that you can't duplicate them to a smaller disk/partition.
    Note that you must duplicate an entire disk/partition to another entire disk/partition -- you cannot copy only selected backups, or backups of selected items, or merge two or more sets of backups. And if you have other items on the disk, they will be copied also (this is a bad idea: see item 3 above).
    In addition, if your backups were made wirelessly, you cannot copy them to a directly-attached internal disk, or an external FireWire or USB disk, and continue making backups to that disk, or vice-versa. This is because backups made wirelessly are stored differently from those done directly.
    Here's how to copy the backups from one disk/partition to a different one:
    a. Turn TM off, via TM Preferences, and de-select the drive (select "none"), quit System Preferences.
    b. Be sure to format the new drive correctly. See item #5 Frequently Asked Questions post at the top of this forum. for detailed instructions.
    c. Connect both drives to your Mac, then open a Finder window. Make sure both partitions are shown in the sidebar (if not, from the Menubar select Preferences > Sidebar, and check the box to show +External disks+ in the sidebar). Leave the Finder window open.
    d. Start Disk Utility, select either partition (indented under the main drive line), and click the Restore tab.
    e. Drag the old partition to the Source box, and the new partition to the Destination box.
    f. Be sure to check the +Erase destination+ box, then the Restore button. This may, of course, take a long time.
    g. When the duplication is complete, note that DU has *changed the name* of the destination partition to be the same as the source. You do not want to leave it that way, so immediately rename one of the partitions. In the sidebar of the Finder window opened above, control-click (right-click) the one you want to rename. When done, look back at the Disk Utility display to be sure you renamed the right one, then quit Disk Utility.
    h. Go to Time Machine Preferences and select the new or renamed drive.

  • How to restore time machine from wireless hard drive?

    I backed up my data to a wireless hard drive before I wiped my hard drive. But now I'm having trouble restoring it.
    Can't restore it from time machine, as it was not fully complete.
    Migration assistant asks for a password to the hard drive, which I don't know. The person in my family who bought the drive entered it, but then migration asssistant greys out continue and nothing seems to happen
    I opened the hard drive myself and there's a bunch of blank files named 01 349 049 984 and such. No extension.
    Help?

    The exhaustive list of backup devices supported by Time Machine consists of Time Capsule and locally connected and mounted volumes, period. Time Machine can use NAS devices, but there are many caveats including but not limited to the necessity for AFP to be running on the server. Wireless storage devices introduce yet another element of uncertainty.
    OS X Mountain Lion: Disks you can use with Time Machine
    Anything else, and you're a test pilot. Let Apple know how it works for you.

  • Restore Time Machine from WD My Cloud (a network drive)

    Good morning.  I recently had my hard drive replaced on my iMac.  I had been using My Cloud as the repository for my Time Machine backups.  When I started my iMac when I got it home, it is not recognizing where the Time Machine backups are and it does not allow me to navigate to a location to find it.  It seems as if the utility is looking for the backups to be directly connected to the machine and not over my network.
    Has any encountered this same issue and successfully resolved it?  If so, how?
    I was on Mountain Lion and now I am on Yosemite.
    Thank you,
    Jay

    Hello, try connecting an ethernet cable directly from your WD to your Mac. Can you find the back-ups now?

  • How to stop Time Machine from creating entirely new backup of external drive?

    I've included an external drive to be backed up into Time Machine. For a few days, the drive was disconnected, however, so only Macintosh HD was getting backed up. I recently re-added the external drive. However, now it appears that since the external wasn't included in the most recent backups, it's decided to re-backup the entire drive.
    Is there any way to prevent it from backing up the entire external drive and instead just backup the changes made, or is that not possible because there is a gap in the backups made for the external?

    First, the amount that TM says it's going to back up is not necessarily the amount it will back up. You'll only know that when the backup finishes.
    I haven't tried this myself, but it may be that after you exclude a volume, TM loses continuity with the previous snapshot. In that case, future backups should be incremental, as long as you don't exclude the volume again.

  • Restore Time Machine from WD My Cloud

    Good morning.  I recently had my hard drive replaced on my iMac.  I had been using My Cloud as the repository for my Time Machine backups.  When I started my iMac when I got it home, it is not recognizing where the Time Machine backups are and it does not allow me to navigate to a location to find it.  It seems as if the utility is looking for the backups to be directly connected to the machine and not over my network.
    Has any encountered this same issue and successfully resolved it?  If so, how?
    I was on Mountain Lion and now I am on Yosemite.
    Thank you,
    Jay

    Hello, try connecting an ethernet cable directly from your WD to your Mac. Can you find the back-ups now?

  • Restore time machine from backup, stuck on Apple screen

    A Macbook Pro I've restored from a TM backup is stuck in a spinning marker in the Apple bootup screen. Any suggestions to get it booting? Thanks

    champ2153 wrote:
    I am having the same issue. When I attempt to restore my information from time machine, the restore seems to go well. But..right around the moment of 70% or so on the progress bar, (with about 20 minutes remaining) the "restore was successful" box pops up and prompts me to restart the machine. Upon restart I can not get past the white apple screen. I've tried just installing OSX
    When you do that, has all your data been restored? If so, just download and install the "combo" update to get back to 10.6.6.
    and then using migration assistant, but migration assistant does not recognize my time machine external. Any thoughts?
    Try repairing your backups, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).

  • Error restoring Time Machine from 10.8.2, iCloud Document?

    Hi
    created a fresh time machine backup and reinstalled my macbook.
    I wanted to restore it manually (only restoring some folders via time machine), but this failes:
    "FILENAME" cannot be converted. Please install a newer version of iWork.
    The file "FILENAME" seems to be a file in my home directory --> library --> mobile document on the time machine backup.
    I already have installed all iWork updates.
    Any ideas?

    no ideas?

  • Restore Time Machine from earlier OS X

    Hello,
    My HDD died recently and I purchased a new one, which has 10.7.3 installed on it. My previous version of OS X was 10.6.8
    I had made a TM back up just prior to the HDD failing, so am wondering can I restore my files from a 10.6.8 TM backup to 10.7.3? I only want my documents, music, photos etc. 
    Thanks
    Sarah

    Upon first boot of the new system/drive wit a fresh install of OS X, use the TM backup from the old system to load accounts, data, and apps using Setup Assistant (whatever parts of it you wish).

  • Two Time Machines from the same computer on one external drive?

    Hello all. I tried searching for a similar situation but didn't see one.
    I have a MBP running Leopard 10.5.8. Its Time Machine is located on an external mirrored raid LaCie drive.
    I have installed Snow Leopard on a separate external LaCie d2 drive on its own partition. On a second partition of that drive is a clone of the MBP HD (with Leopard 10.5.8).
    Can the external mirrored raid LaCie drive I use for Time Machine contain both of the Time Machine backups that are created by the same MBP - one when Leopoard is running, and another when Snow Leopard is running?
    Thanks. I hope I've posed the question clearly enough to trigger thoughts. It's a brain twister for me ...

    Can the external mirrored raid LaCie drive I use for Time Machine contain both of the Time Machine backups that are created by the same MBP - one when Leopoard is running, and another when Snow Leopard is running?
    Yes, but it's not the best solution. A better solution is a separate drive or a separate volume on the same drive in order to keep the backups separate. In this way if anything happens to the Leopard backup volume it won't affect the SL backup volume.
    If you do as you propose each system's backup will be separate but stored in the same Backups.backupd folder as long as you use a different Computer Name in each system. Your backup drive will need to be large enough to maintain full backups of each.

  • How Do I Stop Time Machine From Filling Up My External Hard Drive?

    Hi all -
    I have a 750GB OWC external hard drive on which I back up about 100GB of data from my MacBook using Time Machine, and also store a bunch of media files for work. Currently about 650GB of that is full, and that is mostly because of two Time Machine-related files: The "Backups.backupdb" folder, which is 135.15GB, and "MacBook_001b63336000.sparsebundle," which is 233.71 GB. That means that in the nine months since I bought the drive, about 370GB, or half its available space, has been eaten by Time Machine backups.
    I only back up so I have a bootable copy of all my current (not past) MacBook data if my MacBook is ever lost, stolen, or damaged. I am now very concerned that, if left unchecked, Time Machine will eat into the remaining 100GB of empty space. And my old external hard drive died precisely because it ran out of empty space. Some of my critical files were lost forever, and others I got back in pieces after several weeks of anguish and quite a bit of cash.
    Apple's support page addresses this concern (incredibly) by instructing me to buy another external hard drive. That solution is expensive for me, and what's the point, when Time Machine will eventually fill that one up too?
    So, my questions are:
    1. Is there any point at which Time Machine recognizes it's nearly out of hard drive space, and either stops backing up, or deletes old backups, or sends me a warning, or something?
    2. If not, is there a way I could designate a maximum size for Time Machine backups to take, such as 150 GB, that it cannot exceed?
    3. Partitioning has been suggested, but I don't know how. Any instructions?
    4. The OWC hard drive came with its own backup software. Should I just use that and shut up?
    It would be mighty ironic if the software I use to save all my data got so fat, it sacrificed all my data....
    Thanks in advance -

    Andrew Saks wrote:
    Hi all -
    I have a 750GB OWC external hard drive on which I back up about 100GB of data from my MacBook using Time Machine, and also store a bunch of media files for work. Currently about 650GB of that is full, and that is mostly because of two Time Machine-related files: The "Backups.backupdb" folder, which is 135.15GB, and "MacBook_001b63336000.sparsebundle," which is 233.71 GB. That means that in the nine months since I bought the drive, about 370GB, or half its available space, has been eaten by Time Machine backups.
    this is pretty confusing. have you been using it for both wireless and wired backups? the sparse bundle would only be created if you've used it for network backups. directly attached TM drives don't use a sparse bundle so it looks like you've got two separate backup lines. you should get rid of one as using both is very space inefficient.
    I only back up so I have a bootable copy of all my current (not past) MacBook data if my MacBook is ever lost, stolen, or damaged.
    FYI, TM backups are not bootable themselves. You can use the "full system restore from TM" utility on the leopard install DVd to restore your system from backups. That restored system will, of course be bootable.
    I am now very concerned that, if left unchecked, Time Machine will eat into the remaining 100GB of empty space. And my old external hard drive died precisely because it ran out of empty space. Some of my critical files were lost forever, and others I got back in pieces after several weeks of anguish and quite a bit of cash.
    Apple's support page addresses this concern (incredibly) by instructing me to buy another external hard drive. That solution is expensive for me, and what's the point, when Time Machine will eventually fill that one up too?
    So, my questions are:
    1. Is there any point at which Time Machine recognizes it's nearly out of hard drive space, and either stops backing up, or deletes old backups, or sends me a warning, or something?
    I'm not sure of the precise point (TM need some free space on the backup drive to operate) but yes, this will eventually happen. when it does, TM will inform you of this and will give you an option of either stopping TM backups and changing the TM drive or starting to delete old backups. If you choose the latter it will start deleting old backups to create space for new ones. this is done automatically.
    2. If not, is there a way I could designate a maximum size for Time Machine backups to take, such as 150 GB, that it cannot exceed?
    not unless you partition the drive.
    3. Partitioning has been suggested, but I don't know how.
    it's an option but not right now. you have too little free space left for a successful partitioning process. If you try, the process is sure to fail due to disk fragmentation.
    You need to get rid of A LOT of data if you want to try partitioning. also, fort the future, it's a very good idea to keep one partition entirely for TM and another for data. You'll avoid some of the problems you are having now.
    Any instructions?
    type "creating new volumes" in disk utility help.
    4. The OWC hard drive came with its own backup software. Should I just use that and shut up?
    don't. besides TM there are much better options out there. CCCloner and Superduper! are better than anything that OWC software has to offer.
    It would be mighty ironic if the software I use to save all my data got so fat, it sacrificed all my data....
    Thanks in advance -

  • HT201250 how do I disable time machine? I want to use my external drive as additional storage. But it mirrors everything I edit. If I remove a document, it removes it from the external drive as well.

    how do I disable time machine? I want to use my external drive as additional storage. But it mirrors everything I edit. If I remove a document, it removes it from the external drive as well.
    I purchased a 1 TB WD passport drive, formatted for Mac. I set it up originally (mistakenly) to backup time machine. I went back and set it to "do not backup"  It still backs up evey document I edit. If I add a document when the drive is disconnected, it automatically adds it to the external drive the next time connect to the passport drive. If I remove a document the same thing happens.
    I need additional storage to free up space on my laptop hard drive. This is not working the way I want it to. Help!

    Do not backup your startup volume to another partition on the same drive. If the drive fails you have nothing. Always backup to another drive or volume on another drive.
    The I/O error usually means there's a problem with the drive. Clone ASAP, then repartition and reformat the main drive. Then restore the clone. Here's the basic process:
    You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
    Get an empty external hard drive and clone your internal drive to the external one.
    Boot from the external hard drive.
    Erase the internal hard drive.
    Restore the external clone to the internal hard drive.
    Clone the internal drive to the external drive
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears.  Select the icon for the external drive and click on the downward pointing arrow button.
    After startup do the following:
    Erase internal hard drive
    Open Disk Utility in your Utilities folder.
    After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.  Do not quit Disk Utility.
    Restore the clone to the internal hard drive
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the internal hard drive. Source means the external startup drive.
    Note that the Source and Destination drives are swapped for this last procedure.

  • Restoring Time Machine backup to a drive in a "Voyager Dock"

    Restoring Time Machine backup to a drive in a "Voyager Dock"
    I would like to restore a Time Machine volume to a hard drive not installed in the computer it has backed up.
    I have an iMac 24” with a failing drive. It will eventually need to be replaced.
    I have my Time Machine back up for this computer in a Voyager Docking station.
    I would like to have Time Machine “restore” the iMac’s data to a drive in another Voyager Dock running from a computer other than the iMac involved.
    What I hope to do is bring the “restored” drive and the iMac to my Mac service provider and just have them swap the old drive for the new.
    How do I get Time Machine to do this?

    So, You're saying I can do this from a different computer with its own Time Machine?
    In other words, I have my Time Machinedrive  from the dead iMac and a fresh, formatted drive both hooked up to an unrelated computer with its own Time Machine.
    If I enter Time Machine on that computer won't it show me the data it backs up for that computer only?
    Will Time Machine know that there are two Time Machine backups (the one from the iMac and the one from the new host machine), and allow me to select the one from the iMac?

  • I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died.  Fortunately I've been using Time Machine to back up to a 2nd external drive.  How do I restore my libraries to a new external hard drive?

    I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died.  Fortunately I've been using Time Machine to back up to a 2nd external drive.  How do I restore my libraries to a new external hard drive?

    This is a tricky one.
    Open up Time Machine and go back to a date using the timeline on the right side of the window when you know the drive was working and was backing up as part of Time Machine backups.
    Click on the name of your Mac under the Devices heading on the left side of the window in Time Machine, and if things are working correctly you will see Macintosh HD (or whatever you have named it) and the name of the external hard drive that was backing up in the past.
    Right-Click on the name of the external hard drive and then click on "Restore (name of drive) to....."  You may be asked for your adminstrator password at this point.
    It might be easier to restore the drive contents to your desktop if you have room on your Mac, and then copy things over to the new external drive where you want to store the Aperture and iMovie Libraries.
    Once the libraries have been moved over the new external hard drive, you will likely need to "point" Aperture and iMovie to the location of the libraries on the new external hard drive.

  • How do I move data on time machine from one external hard drive to another

    How do I move data on time machine from one external hard drive to another?

    Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
    Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. Turn Time Machine OFF in its preference pane while copying the volume.

Maybe you are looking for