Restrict Number Value Range

I am attempting to build a form with numeric fields that are supposed to limit the choices the user can enter. Here are the choices:
null (empty)
1
2
3
4
The field should not allow the user to enter a 5 or above. After the fields are all completed, I have a calculation at the end that averages all the data.
I tried to use a drop-down list, but that is formatted as text, and the calculation at the end of the form does not recognize the characters.
Please Help!

Sorry Steve, a lot of head scratching to get a regular expression test to work.
var vPattern = /[0,1,2,3,4]/;
var result = vPattern.test(xfa.event.newText);
if (result == false)
xfa.host.resetData("xfa.form.form1.page1.NumericField4");
Niall

Similar Messages

ECATT: Recording "Restrict Value Range" screen for CO58

Hi,
I need to provide PI Sheet # for CO58 (Process a material). Here, I search the PI Sheet # from Process Order # when I perform this manually. But, when recording this via TCD Mode or SAPGUI mode, I am not able to record the part where PI Sheet # is searched through the "Restrict Value Range" screen through Process Order #.
How can I record this part?
OR
Is there any way to obtain PI Sheet number from PO # through some other transaction. I tried using CO60 but the values inside the table displayed there with PI Sheet # is also not getting recorded.
Any help would be highly appreciated.
Thanks,
Punit Sethi.

Hi,
I need to provide PI Sheet # for CO58 (Process a material). Here, I search the PI Sheet # from Process Order # when I perform this manually. But, when recording this via TCD Mode or SAPGUI mode, I am not able to record the part where PI Sheet # is searched through the "Restrict Value Range" screen through Process Order #.
How can I record this part?
OR
Is there any way to obtain PI Sheet number from PO # through some other transaction. I tried using CO60 but the values inside the table displayed there with PI Sheet # is also not getting recorded.
Any help would be highly appreciated.
Thanks,
Punit Sethi.

F4 help:Restrict Value Range

Hello Experts,
I want to a search help for one field such that when user click on F4 help , it will again pop- up with one screen, in which I need to have 2- 4 fields to Restrict the values then user enter some values here then F4 help will appaer.
Like in standard tables mseg-lifnr F4 help Restrict Value Range screen , but i require only one tab
Plz suggest
Aastha

Hello,
Use the following piece of code.
Parameter : p_value type ......
TYPES : BEGIN OF y_value,
                  value TYPE text6,
                 END OF y_value.
DATA : t_value TYPE STANDARD TABLE OF y_value.
DATA: t_return TYPE STANDARD TABLE OF ddshretval.
Fill table t_value with the values which u require in the F4 help.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield         = 't_value-value'
      dynpprog     = sy-repid
      dynpnr         = sy-dynnr
      dynprofield   = 'p_email'
TABLES
      value_tab       = t_value
      return_tab      = i_return
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.

Value range restrictions for Characterstics

Hi all,
I am not sure where should I post this message as it is related to characterstics in classification system and variant configuration, and I am aware that SD experts are the most knowledgable in those areas
My requirement is simple:
I have a characterstic (CT04) where it has values maintained in the values tab. After some time, some of the values manitained need to be either hidden or locked, so my question is
Is there such a way to do that? I have heard about (value range restrictions) functionality, but I really don't know how to use it or where to use it?
I really appreciate any help.
Regards,

I appreciate if someone could share some experience.
Regards,

Restrict Characteristic on value range in Query Designer

Hi,
In 3.5, it was possible to restrict a filter in the query designer on a value range, even if the start- and end values of that range did not exist in the master data.
In 2004s, it is possible to restrict single value filters to a non-existing masterdata value. However, for value ranges, this does not seem to be the case. Do you know any workaround for this?
Regards,
Daniel

of course, BI 7.0 support value range for restrict.Please kindly release more information about your case .
Value Range
Instead of selecting single values you can quickly gather multiple characteristic values using this next option. This choice provides the following additional options:
1. Between
2. Greater than or equal to
3. Less than or equal to
4. Greater than
5. Less than
And you can reference following URL on this topic
http://help.sap.com/saphelp_nw2004s/helpdata/en/f1/0a563fe09411d2acb90000e829fbfe/content.htm
Edited by: Brian on Oct 22, 2008 3:08 PM

Value ranges

Hi,
Can anyone tell me what is the use of value ranges. and Can anyoen plz give me example how to give data in value ranges table which is presnt in domain.
thanking u all.
regards,
kavita

hi,
A domain defines a value range. A domain is assigned to a data element. All table fields or structure components that use this data element then have the value range defined by the domain.
<b>The value range of a domain is defined by specifying a data type and length (and number of decimal places for numeric data types).</b>
The value range of a domain can be restricted by defining fixed values. If all the fields or components that refer to the domain should be checked against a certain table, this table can be defined as the value table of the domain.
regards,
ashokreddy

How To Restrict Number Of Rows For Multiple Group In Report Output

Hi ,
I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
Below is the XML tag i am using -
First i have declare the variable to restrict the rows -
<xsl:variable name="lpp" select="number(7)"/>
<xsl:variable name="lpp1" select="number(5)"/>
<xsl:variable name="lpp2" select="number(3)"/>
For Each -
<?for-each:PAYSLIP?>
<xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
<xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
<xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
<?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
<?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
<?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
Deduction Group -
<?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Earning Group -
<?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Tax Group -
<?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Please let me know in case additional detail is require.
Thanks in Advance.
Thanks,
Harsh
Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

variable lpp2 is declare to restrict EarTaxLines -
<xsl:variable name="lpp2" select="number(2)"/>
This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

How do I assign images to grid cells based on their random number value?

Hello everyone!
     I need a good point (or shove) in the correct direction.
Background
     I've created (with previous help from this forum) a 12 x 9 random number grid which cycles through the numbers 1 to 9 a total of twelve times each. I've then created a button which shuffles the current grid's cells each time it is clicked. I now want to use 9 images that I have imported as individual symbols into the library (I have given them each their own class titled "skin1," "skin2," ... "skin9") as cell labels or the equivalent. I have also set the images up as individual movie clips (using the .Sprite class as the extended base class but keeping the actual image class names in line with their object name, i.e. the "skin1" image is the "skin1.as" class).
Question
     How do I assign these images to the grid cells based on their respective values (ranging from 1 to 9) and have them populate the grid each time I click the "shuffle" button? So for example, in my grid the numbers 1 through 9 randomly appear 12 times each. Every time the number 4 appears in a cell, I want it to be assigned to the image "skin4" (which is just a graphic that looks like a button and has a fancy number "4" printed on it). Below is a chunk of the code I am using to draw the grid cells with:
// Creates a grid cell when called by generateGrid().
private funciton drawCell(_numeral:int):Sprite
          This is the code I am currently implementing to populate the grids with (although I
          don't want to use text labels as I want to fill each grid with an image according
          to its numerical value (1 to 9).
     var _label:TextField = new TextField();
     _label.multiline = _label.wordWrap = false;
     _label.autoSize = "center";
     _label.text = String(_numeral);
     // Add numerical label to cell array.
     cellLabels.push(_label);
     var _s:Sprite = new Sprite();
     _s.graphics.lineStyle(2, 0x019000);
     _s.graphics.drawRect(30, 0, cellW, CellH);
     _s.addChild(_label);
     return _s;
     While the following isn't working code, it will hopefully demonstrate what I want to achieve inside this function so I don't have to use the above snippet for text labels:
     //This will "hopefully" create an array of all 9 images by calling their classes.      var _imageArray:Array = [skin1, skin2, skin3, skin4, skin5 , skin6, skin7, skin8, skin9];      // This is what I want to happen for each cell using the above image array:      for (i = 0; i < cells; i++)      {           if (_numeral == 1)           {                // Insert skin1 image for each instance of #1 in the grid.           }           if (_numeral == 2)           {                // Insert skin2 image for each instance of #2 in the grid.           }           ...           if (_numeral == 9)           {                // Insert skin9 image for each instance of #9 in the grid.           }      }
     Again, I don't want to use text labels. I have a custom skin graphic that I want to go over each number on the grid based on its numerical value (1 to 9). Any help with this is much appreciated!

kglad,
     Thank you for your help with this one. Using the code below, I have successfully populated my grid cells with the desired corresponding graphics. I noticed one thing though regarding my use of the shuffle button with this particular implementation: even though the numerical values residing in each cell get shuffled, the original images remain in the grid rather than being replaced by new ones. The first code snippet below is the revised cell drawing function including your help; the second snippet shows you my simple shuffle button function (where the problem lies, I think).
Snippet #1:
     // Creates a grid cell when called by generateGrid().
     private function drawCell(_numeral:int):Sprite
          var _label:TextField = new TextField();
          _label.multiline = _label.wordWrap = false;
          _label.autoSize = "center";
          // Creates a label that represents the numerical value of the cell.
          cellLabels.push(_label);
          var _s:Sprite = new Sprite();
          _s.graphics.lineStyle(2, 0x019000);
          _s.graphics.drawRect(30, 0, cellW, cellH);
          // Physically adds the labels to the grid.
          _s.addChild(_label);
          // Assigns a graphic class to a cell based on its numerical value.
          var _classRef:Class = Class(getDefinitionByName("skin" + _numeral));
          // Undefined variable for holding graphic classes.
          var _image:* = new _classRef();
          // Lines the images up with the grid cells.
          _image.x = 30;
          // Physically adds a graphic on top of a cell label.
          _s.addChild(_image);
          return _s;
     So far so good (although I question needing text labels at all if they are just going to remain invisible underneath the images, but enough about that for now). This next part is the reason that the images won't shuffle with the cell values, I think.
Snippet #2:
     // When shuffleButton is clicked, this event shuffles
     // the number array and fills the cellLabels with the new values.
     private function onButtonShuffleClick(e:MouseEvent):void
          // Shuffles the number array.
          shuffle(numbers);
          // Verifies the array has been shuffled.
          trace("After shuffle:", numbers);
          // Loop replaces old cellLabels with new number array values.
          for (var i:int = 0; i < cells; i++)
               cellLabels[i].text = String(numbers[i]);
     As you can see, it never replaces the original images that populate the grid. I tried using the _s.removeChild(image) function but that didn't work, nor would copying/pasting some of the code from snippet #1 directly into this function as it would cause another instance of the images to be placed over top of the existing ones rather than actually swapping them out. Any continued help here is greatly appreciated!
     PS Is there a quicker method for posting code into these forums without having to type it all out by hand again (i.e. copy/paste or drag/drop from my .fla or Notepad file directly into this thread)?

How to restrict number of hits from a browser, within a specific interval.

Hi,
we have a web app in which user clicks on a specific submit continously. This fills up the server threads and other users trying to login either get a timeout or page not found. my questions ---
1. Is there a way to configure weblogic to timeout the httprequest and also the underlying thead which is doing the work.
2. Is there a way to restrict number of requests from a client within a specific interval..
thanks in advance..

Hello Benita
Set the dialog type of your search help = 'A' (dialog depends on set of values).
Regards
Uwe

How to write a routine in infopack to restrict a date range !!!!

Hi
I want to load the data for a speicific date range ,i.e , i want to load the data between created on some date range which is not in between the same range for changed on...so i want to restrict that date range for changed on....Please le tme know the routine logic to restrict a date range....
regards...

How to ... Write Infopackage selection Routine
1.Create an Infopackage 2. Go to selections tab and choose Type: 6 u2013 ABAP Routine.You can see following available options(F4 Help).
3. Give disruption, and hit enter, now you will move to following screen. 4. Write Code between begin of Routine and End of Routine.
5. See below sample code to select date range from Previous 6 days to Current date.
6. L_T_Range table is of Type structure RSSDLRANGE.
a. RSSDLRANGE contains SIGN, OPTION, LOW, HIGH
We need to populate these fields to pass range dynamically.
Sample Code:
***$$ begin of routine - insert your code only below this line -
Data: l_idx like sy-tabix.
Data: date_low like sy-datum.
Date_low = sy-datum u2013 6.u201D(To get 6 days back).
read table l_t_range with key
fieldname = 'CRDAT'.
l_idx = sy-tabix.
Pass Range values to L_T_Range Table.
Move date_low to L_T_Range -Low.
Move sy-datum to L_T_Range -High.
L_T_Range -Sign = u2018Iu2019. *****(Here: I u2013 Include, E u2013 Exclude)
L_T_Range -Option = u2018BTu2019.****( Here: BT u2013 Between )
modify l_t_range index l_idx.
p_subrc = 0.
**$$ end of routine - insert your code only before this line -
7. Syntax check and Save.
Hope it Helps
Srini

Need to restrict KFF values on Charge Account Screen in Oracle Apps 11i

Hi,
I have a requirement to restrict KFF values based on certain criteria in the charge account screen in Oracle Apps 11i..
Could you pls advise on how this can be achieved.
Thanks,
Shashank
Edited by: Shashank Senan on May 23, 2012 2:53 PM

Can you please mark my answers correct......if they were helpful to you.....
That would be so nice of you....:-)
and regarding your next requirement, You should create a new table which will contain Date, Worker Number and any other details that you want.
In the form, for every date for which you want to enter the data, you will select the max(date) before the current date and maximum worker number for that selected date and then from that number you can select next 15/20 workers or whatever your number is.
e.g. for the first time if you want to enter data for 01-jul-2010 and you have work for 15 workers, you will select max(date) where date<01-jul-2010, but you will not find any bcoz this is your first entry. So wat you will do is will start popupating your grid from number 1-15.
Next day you will select max(date) where date<02-jul-2010, you will find 01-jul-2010. Then you will select max(number) for 01-jul-2010, you will find 15. So populate your grid from number 16-30 (whatever your number is). and so on.
Hope it helps you...
Please mark my answer Helpful or correct and Please create a new thread for new question
Thanks
Nishu

Restrict number of rows to be pulled from PeopleSoft's PS_LEDGER table while importing data in FDMEE

Hi,
We need to know if FDMEE 11.1.2.3.520 product supports restricting number of rows to be pulled from PeopleSoft's PS_LEDGER table.
All the records fetched from PS_LEDGER is getting loaded into TDATASEG table.
Currently, it is trying to pull all the records based on the given "period", "version" and "year" combination. We are looking to restrict rows based on specific account/entity/program/subprogram combination.
If this is can be done, will it be an out-of-the-box functionality or does it require any customization/import scripts/api.
Admin guide does say we can use Jython to filter rows using import scripts. However, it seems to be limited to file not a table as a source.
I have attached a document with the screenshots so that the issue is better understood !
Thanks,
Hari

1)
When you set a column to hidden in a classic report using the method I described, it creates hidden form elements for that column.
<tt><input type="hidden" name="f01" value="" id="f01_0002"></tt>
You should inspect the source to figure out the name value.
Since this belongs to the wwv_flow form, we can therefore get this data with: wwv_flow.f01
Alternatively, you could have used the apex_item API to achieve the same result, which probably gives a bit better control.
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_item.htm#CHDBFHGA
select apex_item.hidden(1, col) || col col
from table
Set that column to a standard report column so it doesn't escape the html.
You can also reference the data in these fields using PL/SQL using the apex_application API:
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_app.htm#CHDGJBAB
2)
As above, setting the column to hidden creates hidden elements on the page. It is simply f01 because that is the only hidden field I would have on my page. With four reports on the page, you would need to be careful not to do the same on the other reports, as you would get inaccurate data. For each report, setting columns to hidden always starts with f01. In that, you would be best to use the apex_item API.
I actually initially ran into this issue when i had a tabular form on the same page as a report with hidden fields, which was causing conflicts in the page processes.
Hope it helps.

Query row structure to restrict on multiple ranges of Calendar Year /Month using Custom exit

Hi All,
I have written 2 queries in Bex 7.x which have similar requirement. One uses 0CALMONTH and other 0FISCPER. I will describe scenario with Calendar Year month query.
Query to have user entry screen for 0CALMONTH. Added 0CALMONTH in Filters section and restricted on mandatory user entry variable.
Key figures restricted in four ways by creating a row structure with four selections
Current Month User entered value on selection screen (Restricted on User entry variable)
Previous Month / Period (Above value offset -1)
YTD value Range from Previous July / 07.YYYY to current user entered month value (Custom exit)
LYTD value - Above value for previous year (Above value offset -12)
For YTD value wrote a custom exit code which uses the user entry variable on 0CALMONTH to retrieve the current month value and then give output range value for YTD.
The custom exit code when debugged seems to calculate the correct range. However the query output is not working and gives out the same data for Current month and YTD range. Also LYTD value and Previous month value don't show up with any data at all.
Any tips on where we are going wrong would be helpful.
Thanks!
Custom Exit code:
WHEN 'ZGB_FP_AYTD_PTNR'.
     IF i_step EQ '2'.
       READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZFP_AYTD_PRTNR'
                                                            iobjnm = '0CALMONTH'.
       IF sy-subrc EQ 0.
         CLEAR: l_month_curr, l_month_low, l_year_curr, l_year_low,
                l_calmonth_low, l_calmonth_high.
         l_month_curr = loc_var_range-low+4(3).
         l_year_curr = loc_var_range-low+0(4).
         l_month_low = 001.
         l_year_low = l_year_curr.
         CONCATENATE l_year_low l_month_low INTO l_calmonth_low.
         CONCATENATE l_year_curr l_month_curr INTO l_calmonth_high.
         l_s_range-low = l_calmonth_low.
         l_s_range-high = l_calmonth_high.
         l_s_range-sign = 'I'.
         l_s_range-opt = 'BT'.
         APPEND l_s_range TO e_t_range.
       ENDIF.
     ENDIF.

Hi
try this code
WHEN '0CALMONTH'.
CLEAR: l_month_curr, l_month_low, l_year_curr, l_year_low,
                l_calmonth_low, l_calmonth_high.
     IF i_step EQ '2'.
loop at i_t_var_range INTO loc_var_range where vnam = 'ZFP_AYTD_PRTNR'.
         l_month_curr = loc_var_range-low+4(2).
         l_year_curr = loc_var_range-low+0(4).
         concatinate '0' l_month_curr into l_month_low.
         CONCATENATE l_year_low '001' INTO l_calmonth_low.
         CONCATENATE l_year_curr l_month_low INTO l_calmonth_high.
         l_s_range-low = l_calmonth_low.
         l_s_range-high = l_calmonth_high.
         l_s_range-sign = 'I'.
         l_s_range-opt = 'BT'.
         APPEND l_s_range TO e_t_range.
       endloop.
     ENDIF.
This code used for calculate fiscal period interval from your input month.
For Ex
user input is 05.2014
customer exit result as 001.2014 - 005.2014.
Note: Fiscal year period is Jan - Dec otherwise need to convert the input month details.
Regards
Sureshkumar

Value range(column chart): management cockpit

Hi friends,
how can i put value range condition in column chart. my situation is like this
I have 10 employees with expereinces 4.1(i.e 4 yrs 1 month),5.5, 1.2, 0.5, 3.5, 0.2, 4, 6, 7 and 8.
I want to present in column chart in x-axis like <1 yrs, 2-4,5-6,>7 and in y-axis count.
How can i achieve this. I maintained calculated keyfigues(for <1 yrs, 2-4,5-6,>7) on key figuer total experience and, in bi report i'm getting correct output. Even total experience is also calculated key figure and perfectly viewing this value in cockpit. But in managment cockpit, remaining calculated keyfigues(<1yrs,2-4,5-6,>7) i'm not getting. So i want to prefer to set value range in chart.
pls suggest me.
thanks,
raju

Hello Raju,
You can achieve this by simply using a User defined Periodization & Time Variable.
http://help.sap.com/saphelp_sem60ep1/helpdata/en/1b/3131375fc9342ae10000009b38f839/frameset.htm
Defining Periodizations
1.     To define a periodization, choose Periodization in the dialog structure.
2.     Choose to switch to change mode.
3.     Choose New Entries.
4.     In the Periodization column, enter a name for the periodization (up to four characters).
5.     In the Fiscal Year Variant column, choose the fiscal year variant on which you want to base the periodization. (The periodization itself is based on periods of the fiscal year variants.)
6.     In the Long Text column, enter a descriptive name for the periodization.
7.     Save your entries and return.
8.     In the list of periodizations, select the periodization you just created.
9.     Choose Interval in the Dialog Structure.
10.     Choose New Entries.
11.     In the Interval No. column, enter a sequential number for each period to be defined, starting with "1".
12.     Specify the left time limit (= Start column) and the right time limit (= End column) of the range by entering the respective period of the fiscal year variant on which it is based.
Eg: In your case you follow this
               Start Column          End Column
Period 1(<1 yrs)           1               12
Period 2(2-4 yrs)                     13               36
Period 3(5-6 yrs)                     37               60
Period 4(>7 yrs)          61               specify the no. of months you want to calculate for
13.     Save your entries and return
In the Cockpit-Frame-Design screen for the mesures(KPI) on the Y-axis you select the check box of Periodization and select this User defined Periodization created by you. You click on the aggregation box too to get the cummulative value for the defioned periods.
Hope this helps. Revert incase of any query or let me know if it doesnot work as I have tried this with quarters and its working fine in my case.
Regards,
Priyanka Singh

As Bex Query design why I canu2019t select from list in values range

Hello experts,
I want to pop input window when I use analyzer run bw report, I know to add filter through restrict, then I selected value ranges, it was appearing between input text, the button canu2019t let me input, I tried select from list, Bex Query design occured some errors, if click u2018exitu2019 will prompt unknown software exception(0xc00200001) then stop .
the imange: [http://www.itpub.net/thread-1192217-1-1.html]
How to input text or select list? Why My Bex query design canu2019t do select from list?
please let me know the soultions, thanks for you help in advance
Regards,
Steve

first of all, thanks for your help. if need to install batch, please let me know. many thanks .
more infomation as belows:
the windows prompt:
Your application an unhandled exception occurs. If you click [continue], the application will ignore the error and try to continue. If you click the [end], it will immediately close the application.
I clicked more detail button , displayed as belows:
For more information call using Just-In-Time (JIT) debugging details
Please refer to the end of this message (instead of this dialog box) information.
Exception Text **************
System.NullReferenceException: Object reference not set to be the implementation of individual objects
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.HandleUnhandledException(Exception iException)
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
in System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
in System.Windows.Forms.Control.WndProcException(Exception e)
in System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
in System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
in System.Windows.Forms.Control.SetVisibleCore(Boolean value)
in System.Windows.Forms.Form.SetVisibleCore(Boolean value)
in System.Windows.Forms.Control.set_Visible(Boolean value)
in System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
in System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
in System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
in System.Windows.Forms.Form.ShowDialog()
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.GetUserSelection()
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.ShowSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.InvokeSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.OnInvokeSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.picValueHelp_Click(Object sender, EventArgs e)
in System.Windows.Forms.Control.OnClick(EventArgs e)
in System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
in System.Windows.Forms.Control.WndProc(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
inSystem.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Restrict Number Value Range

Similar Messages

Maybe you are looking for