Restrict OSD to PXE boot only

In my environment we wish to only use PXE boot for imaging machines.  Is there a conditional check I can add to a task sequence that will cause it to abort if it's not run from a PXE boot?  I guess what I'm shooting for is a fail-safe that will
prevent someone from accidentally deploying a task sequence to a collection of computers thus wiping them out.  I would hate for someone to wipe out the entire infrastructure.  I know when you deploy the task sequence there are options that define
where and how to deploy a task sequence, but what if someone accidentally clicks the wrong option (i.e. config client)?  I would appreciate any suggestions.  Thanks in advance...

A very simplistic method would be to set a task sequence variable (for example StartedInWinPE) to true, as the first step in the task sequence, when the task sequence was started in WinPE (use the buildin variable _SMSTSInWinPE for that
check). Then add the rest of the task sequence in a group and use the StartedInWinPE variable as a check to start the group. That way the rest of the task sequence will only run when it was started in WinPE.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

  • PXE boot OSD connects to Internet-only Management Point. A bug?

    So here is the deal: SCCM registers the Management Points to be used in DPs PXE in a Registry file, it is done in alphabetical order (or install order), so all PXE boots will always connect to the first MP (Microsoft, WTF?). In my case, the first is an INTERNET
    ONLY MP, why would PXE Booted OSD connect to that? Brrr..
    Solution is to edit the registry, put the MPs in the right order and then it works like a charm.. until some SCCM maintenance task overwrites it with the default MP list, including internet only MP as first.
    MPs don't respect boundaries and I cannot just block the ports (OSD will be slow, it first tries to connect to the internet MP, times out, then uses the next one).
    A) This behaviour is a bug. PXE Boot should NEVER connect to Internet Only MP (OSD is not supported for IBCM).
    B) Does anybody know what maintenance overwrites the DPs registry key "ManagementPoints"?
    I cannot just use one MP. All external MPs are configured for internet only, internal MPs are configured intranet only. 
    Ideas?

    The distribution manager on the site server is the component that populates the MP list on the registry of DP/PXE.
    Dist mgr currently writes all the MPs and does not filter-out the internet-facing MPs.
    Even if you manually edit the registry on the DP, dist mgr will over-write it the next time it updates the DP. You can try to put an ACL on the registry key which prevents the site server from updating it. However, the DP will never get updated by the site
    for other things.

  • Toshiba L755 is the only one that will not PXE BOOT

    I have a few host on my network which it has VMWare 10 installed, successively performed deployment into those machines(Hosts and created VM"s). Now, I do have also a Toshiba L755-S5258 that will not complete the process,  it does not give any
    errors. The following is the messages it gives.
    Client MAC ADDR: xx xx xx xx xx xx       GUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXX
    Client IP:XXX.XXX.X.XX        MASK:  XXX.XXX.XXX.x                  DHCP IP:   XXX.XXX.X.X
    Gateway IP: XXX.XXX.X.X
    Downloaded WDSNBP...
    Press F12 for network service boot
    Windows Deployment services: PXE boot Aborted.
    PXE-MOF: Exiting Intel PXE ROM
    This si the only unit that does not follow through with the deployment
    Note that I've deleted other machines that I successively  deployed to from the Known Computers on Active Directory User and Computers, with not good results
    Please any one help me decipher this headache 

    Hi,
    Are your using the WDS for the Windows deploy? A network boot program (NBP) is the first file that is downloaded and executed as part of the network boot process and it controls
    the beginning of the boot experience (for example, whether or not the user must press F12 to initiate a network boot). NBPs are specific to both the architecture and firmware of the client. You must accounting the screen press F12 to allow the system boot
    from the WDS. The VMware® workstation PXE booting issue please ask your software vendor.
    The related KB:
    Managing Network Boot Programs
    http://technet.microsoft.com/en-us/library/cc732351(WS.10).aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • OSD PXE boot: no policy available

    Hi,
    We have some issues with certain machines, PXE boots says "no policy available" whereas they are in the correct collection.
    We found out that the object seems to be corrupt due to the fact we import it manually (via MAC-address) and autodiscovery of groups in which computer objects reside. The latter is needed to populate collections, f.e. we deploy Office 2013 to the a collection
    "Office 2013" which queries the AD-group Office 2013.
    If we disable the AD Directory Groups Discovery and delete, recreate the object, PXE boot works fine again. However, we 'd need to find out the root cause since we cannot to this every time this issue occurs (and it happens more often lately).
    Please advise.
    J
    Jan Hoedt

    Thanks, I know about the PXE-log but that doesn't give us extra info. We 'd need to know how to avoid corruption of the computer object. Leaving as is doesn't solve the problem, pc just won't boot, disabling ad group discovery recreating the object is only
    a workaround for now but not acceptable as solution.
    Probably the corruption occurs because at the time of creating the object, the ad discovery is done. AD discovery runs every 5 minutes. We need this discovery interval at 5 mintues because after OS deploy immediately applications/packages are deployed based
    upon collections (which query AD group memberships).
    Jan Hoedt

  • SCCM 2012R2 OSD PXE-boot-smstftp .var file download times out errorcode 0x00000001- at this point: "Preparing Network" and Reboots

     
    Hello All,
    Please I need help! I have not seen the above error without relationship to two of the  known causes for sometime during a Windows 7 osd in an SCCM 2012 R2 environment with a remote DP/PXE server. I understand this error: to occur when the boot images
    does not have "Network drivers in the past Winpe version ( i.e. 3.0, 4.0), not Winpe 5.0 which has all the Network and storage drivers for Windows 7" or when Port fast is not enabled on the switch port the pxe device is plugged into. These two causes
    stated here have been verified and confirmed not to be the cause in this case within the environment. The PXE boot device has ip-address (verified using ip-config, diskpart as well reveals the disk is online) and can ping the wds/pxe server and the sccm server.
    Port fast is enabled on the switch port the device is plugged into. I am stuck on this one; as I could not ascertain the cause on this occasion. 
    Please see details below and I welcome any help any body can offer, thanks in advance guys!
    Client – Winpe x64
    Server - Windows Server 2008 R2 configured as a PXE / WDS / SCCM DP
    Network - both devices on the same subnet
    Problem: Client performs PXE boot, downloads Winpe without problems.  Client then tries to download .var file.  This is not successful and TFTP timeout is received.  Error code in
    smsts.log states:
    <![LOG[Executing: X:\sms\bin\x64\smstftp.exe -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.285+480"
    date="07-01-2014" component="TSPxe" context="" type="0" thread="376" file="tspxe.cpp:177">
    <![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="14:13:57.332+480" date="07-01-2014" component="TSPxe" context="" type="0"
    thread="376" file="commandline.cpp:228">
    <![LOG[Set command line: "X:\sms\bin\x64\smstftp.exe" -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.332+480"
    date="07-01-2014" component="TSPxe" context="" type="0" thread="376" file="commandline.cpp:731">
    <![LOG[Executing command line: "X:\sms\bin\x64\smstftp.exe" -i PXE-Server get \SMSTemp\2014.07.01.14.09.09.0001.{46173825-3EDA-4352-8947-3549830D77A7}.boot.var X:\sms\data\variables.dat]LOG]!><time="14:13:57.332+480"
    date="07-01-2014" component="TSPxe" context="" type="1" thread="376" file="commandline.cpp:827">
    <![LOG[Process completed with exit code 1]LOG]!><time="14:14:45.379+480" date="07-01-2014" component="TSPxe" context="" type="1" thread="376"
    file="commandline.cpp:1123">
    Network trace is detailed below:
    324994  11:47:35 04/07/2014        166.7634594                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:320, UDP:319, IPv4:72}
    325069  11:47:36 04/07/2014        167.7554047       svchost.exe        Client    Server  
    TFTP      TFTP: Read Request - File: \SMSTemp\2014.07.03.15.45.31.0001.{549002A3-C9C9-4189-8AFE-9F8B272BECC1}.boot.var, Transfer Mode: octet                
    {UDP:321, IPv4:72}
    325070  11:47:36 04/07/2014        167.7556504                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:320, UDP:319, IPv4:72}
    325071  11:47:36 04/07/2014        167.7598345                      
    Server   Client    TFTP      TFTP: Data - Block Number: 1                {UDP:322, IPv4:72}
    325072  11:47:36 04/07/2014        167.7607151                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 1          {UDP:322, IPv4:72}
    325073  11:47:36 04/07/2014        167.7608240                      
    Server   Client    TFTP      TFTP: Data - Block Number: 2                {UDP:322, IPv4:72}
    325074  11:47:36 04/07/2014        167.7615948                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 2          {UDP:322, IPv4:72}
    325075  11:47:36 04/07/2014        167.7616991                      
    Server   Client    TFTP      TFTP: Data - Block Number: 3                {UDP:322, IPv4:72}
    325076  11:47:36 04/07/2014        167.7624602                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 3          {UDP:322, IPv4:72}
    325077  11:47:36 04/07/2014        167.7625635                      
    Server   Client    TFTP      TFTP: Data - Block Number: 4                {UDP:322, IPv4:72}
    325078  11:47:36 04/07/2014        167.7629426                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 4          {UDP:322, IPv4:72}
    325079  11:47:36 04/07/2014        167.7630452                      
    Server   Client    TFTP      TFTP: Data - Block Number: 5                {UDP:322, IPv4:72}
    325080  11:47:36 04/07/2014        167.7637927                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 5          {UDP:322, IPv4:72}
    325081  11:47:36 04/07/2014        167.7638947                      
    Server   Client    TFTP      TFTP: Data - Block Number: 6                {UDP:322, IPv4:72}
    325082  11:47:36 04/07/2014        167.7643324                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 6          {UDP:322, IPv4:72}
    325083  11:47:36 04/07/2014        167.7644367                      
    Server   Client    TFTP      TFTP: Data - Block Number: 7                {UDP:322, IPv4:72}
    325084  11:47:36 04/07/2014        167.7652140                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 7          {UDP:322, IPv4:72}
    325085  11:47:36 04/07/2014        167.7653183                      
    Server   Client    TFTP      TFTP: Data - Block Number: 8                {UDP:322, IPv4:72}
    325086  11:47:36 04/07/2014        167.7660907                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 8          {UDP:322, IPv4:72}
    325087  11:47:36 04/07/2014        167.7661940                      
    Server   Client    TFTP      TFTP: Data - Block Number: 9                {UDP:322, IPv4:72}
    325088  11:47:36 04/07/2014        167.7669372                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 9          {UDP:322, IPv4:72}
    325089  11:47:36 04/07/2014        167.7670323                      
    Server   Client    TFTP      TFTP: Data - Block Number: 10                {UDP:322, IPv4:72}
    325090  11:47:36 04/07/2014        167.7674067                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 10        {UDP:322, IPv4:72}
    325091  11:47:36 04/07/2014        167.7674809                      
    Server   Client    TFTP      TFTP: Data - Block Number: 11                {UDP:322, IPv4:72}
    325092  11:47:36 04/07/2014        167.7681308                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 11        {UDP:322, IPv4:72}
    325093  11:47:36 04/07/2014        167.7682056                      
    Server   Client    TFTP      TFTP: Data - Block Number: 12                {UDP:322, IPv4:72}
    325094  11:47:36 04/07/2014        167.7685383                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 12        {UDP:322, IPv4:72}
    325095  11:47:36 04/07/2014        167.7686108                      
    Server   Client    TFTP      TFTP: Data - Block Number: 13                {UDP:322, IPv4:72}
    325096  11:47:36 04/07/2014        167.7692475                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 13        {UDP:322, IPv4:72}
    325097  11:47:36 04/07/2014        167.7693216                      
    Server   Client    TFTP      TFTP: Data - Block Number: 14                {UDP:322, IPv4:72}
    325098  11:47:36 04/07/2014        167.7696477                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 14        {UDP:322, IPv4:72}
    325099  11:47:36 04/07/2014        167.7697202                      
    Server   Client    TFTP      TFTP: Data - Block Number: 15                {UDP:322, IPv4:72}
    325100  11:47:36 04/07/2014        167.7703651                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 15        {UDP:322, IPv4:72}
    325101  11:47:36 04/07/2014        167.7704386                      
    Server   Client    TFTP      TFTP: Data - Block Number: 16                {UDP:322, IPv4:72}
    325102  11:47:36 04/07/2014        167.7707479                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 16        {UDP:322, IPv4:72}
    325103  11:47:36 04/07/2014        167.7708214                      
    Server   Client    TFTP      TFTP: Data - Block Number: 17                {UDP:322, IPv4:72}
    325104  11:47:36 04/07/2014        167.7714862                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 17        {UDP:322, IPv4:72}
    325105  11:47:36 04/07/2014        167.7715603                      
    Server   Client    TFTP      TFTP: Data - Block Number: 18                {UDP:322, IPv4:72}
    325106  11:47:36 04/07/2014        167.7718715                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 18        {UDP:322, IPv4:72}
    325107  11:47:36 04/07/2014        167.7719450                      
    Server   Client    TFTP      TFTP: Data - Block Number: 19                {UDP:322, IPv4:72}
    325108  11:47:36 04/07/2014        167.7726029                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 19        {UDP:322, IPv4:72}
    325109  11:47:36 04/07/2014        167.7726800                      
    Server   Client    TFTP      TFTP: Data - Block Number: 20                {UDP:322, IPv4:72}
    325110  11:47:36 04/07/2014        167.7733471                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 20        {UDP:322, IPv4:72}
    325111  11:47:36 04/07/2014        167.7734203                      
    Server   Client    TFTP      TFTP: Data - Block Number: 21                {UDP:322, IPv4:72}
    325112  11:47:36 04/07/2014        167.7737411                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 21        {UDP:322, IPv4:72}
    325113  11:47:36 04/07/2014        167.7738142                      
    Server   Client    TFTP      TFTP: Data - Block Number: 22                {UDP:322, IPv4:72}
    325114  11:47:36 04/07/2014        167.7744648                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 22        {UDP:322, IPv4:72}
    325115  11:47:36 04/07/2014        167.7745386                      
    Server   Client    TFTP      TFTP: Data - Block Number: 23                {UDP:322, IPv4:72}
    325116  11:47:36 04/07/2014        167.7748657                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 23        {UDP:322, IPv4:72}
    325117  11:47:36 04/07/2014        167.7749395                      
    Server   Client    TFTP      TFTP: Data - Block Number: 24                {UDP:322, IPv4:72}
    325118  11:47:36 04/07/2014        167.7755914                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 24        {UDP:322, IPv4:72}
    325119  11:47:36 04/07/2014        167.7756649                      
    Server   Client    TFTP      TFTP: Data - Block Number: 25                {UDP:322, IPv4:72}
    325120  11:47:36 04/07/2014        167.7760109                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 25        {UDP:322, IPv4:72}
    325277  11:47:37 04/07/2014        168.7554246                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:320, UDP:319, IPv4:72}
    325278  11:47:37 04/07/2014        168.7709396                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 25        {UDP:322, IPv4:72}
    325397  11:47:39 04/07/2014        170.7708892                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 25        {UDP:322, IPv4:72}
    326185  11:47:40 04/07/2014        171.7552905                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:320, UDP:319, IPv4:72}
    327030  11:47:43 04/07/2014        174.7588879                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    327031  11:47:43 04/07/2014        174.7707730                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 25        {UDP:322, IPv4:72}
    327178  11:47:44 04/07/2014        175.7552028                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    327510  11:47:45 04/07/2014        176.7551962                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    328598  11:47:48 04/07/2014        179.7552497                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    328630  11:47:51 04/07/2014        182.7551309                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    328631  11:47:51 04/07/2014        182.7707620                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 25        {UDP:322, IPv4:72}
    328658  11:47:54 04/07/2014        185.7550375                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    328669  11:47:57 04/07/2014        188.7709719                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    328677  11:47:59 04/07/2014        190.7862445                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 25        {UDP:322, IPv4:72}
    328690  11:48:00 04/07/2014        191.7708666                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    328717  11:48:03 04/07/2014        194.7706918                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    328730  11:48:06 04/07/2014        197.7704623                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    328736  11:48:07 04/07/2014        198.7861669                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 25        {UDP:322, IPv4:72}
    329217  11:48:09 04/07/2014        200.7705229                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    329420  11:48:12 04/07/2014        203.7704633                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    329795  11:48:15 04/07/2014        206.7704298                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    329796  11:48:15 04/07/2014        206.7858646                      
    Client    Server   TFTP      TFTP: Acknowledgement - Block Number: 25        {UDP:322, IPv4:72}
    329990  11:48:18 04/07/2014        209.7704360                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    330005  11:48:21 04/07/2014        212.7703291                      
    Client    Server   AuthIP  AuthIP:version 1.0, Main Mode, Initiator, First Exchange with Unknown peer SPN, Initiator provide proposal Anonymous for negotiation ,Payloads = HDR, CRYPTO, SA, AUTH, Ni, VID, KE, NAT-D, Flags = ..., Length =
    440       {AuthIP:419, UDP:319, IPv4:72}
    330014  11:48:23 04/07/2014        214.7862410                      
    Client    Server   TFTP      TFTP: Error - ErrorCode: 0, ErrorMessage: timeout on receive           {UDP:322, IPv4:72}

    Hi,
    According to the logs, this issue still should be related to network driver. It failed after network driver initialized. Please try to use another network driver.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • OSD to Surface fails to PXE Boot and returns PXEGetPXEData Failed with 0x80004005

    Scenario: When trying to Image Windows 8.1 to a Surface Pro, Surface Pro 2 and Surface Pro 3 I have downloaded the latest Surface Firmware and Drivers (August 18th 2014 I believe), the NIC's are in the x64 PXE Boot Image. I have verified that no DHCP Option
    67 is set, and that SpanningTree PortFast is enabled. All other Images function correctly, Windows 7 Sp1 works. We use the Microsoft USB NIC, and we PXE boot and download the PXE Image fine, then it comes into windows and goes to detect the NIC, at which point
    it fails and reboots.
    The Surface has had Firmware update on it to the latest.
    It appears the NIC just stops working, which makes me think that the latest Driver pack for Surface does not contain the PXE boot versions for their NIC.
    Trying the Docking Station (which utilizes NIC ASIX AX888772) exhibits the same problem.
    The NIC stays active until the OSD Screen comes up, it fails trying to load the Surface NIC though (or the NICs in the Driver pack they just released do not include a PXE Boot Driver...the Drivers once imported do not show any as being Boot Critical...which
    make me think this is the case even more so.
    Doing a USB PXE Boot also fails to load the NIC.
    Going to F8 and doing IPCONFIG /RENEW verifies the NIC is not active.
    I see tons of postings on the Surface being a nightmare to image.
    Errors:
    Failed to Download pxe variable file. Code (0x0000001)
    PXEGetPXEData Failed with 0x80004005
    Anybody having any other experiences out there, or have anything else they could think to try?
    David Baur

    (or the NICs in the Driver pack they just released do not include a PXE Boot Driver...the Drivers once imported do not show any as being Boot Critical...which make me think this is the case even more so.
    There are no "PXE boot versions" of drivers at all. What you described just indicates that there is no driver in winpe that matches the hardware. WinPe is based on the respective version of the full os so you have to add Win8.x drivers to the boot image.
    The architecture also has to match. Have you added NIC drivers to the boot image at all?
    NIC drivers are never boot critical if I am not mistaken.
    Torsten Meringer | http://www.mssccmfaq.de

  • OSD: pxe boot fails with "failed to get infromation for MP:/"

    Hi,
    We face an issue on pxe boot. It boots into pxe then tries to apply network settings but then reboots.
    Ipconfig is ok, smsts.log says "failed to get information for MP:/oursccmserver.
    Troubleshooting:
    *PXE is working fine when client as well as sccm-server are in same subnet, it fails when in different subnets.
    *Firewall is fully opened, no connections blocked.
    *Ping to sccm-server works fine on dns
    Please advise.
    J.
    smsts.log:
    Missing root CA environment variable from variables file    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Support Unknown Machines: 0    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Custom hook from X:\\TSConfig.INI is     TSPxe    26/03/2014 16:37:11    288 (0x0120)
    No hook is found to be executed before downloading policy    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Authenticator from the environment is empty.    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Need to create Authenticator Info using PFX    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Initialized CStringStream object with string: {40AB3050-A926-4BA5-9D17-7423F93CBCD5};2014-03-27T00:37:11Z.    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Set media certificate in transport    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Set authenticator in transport    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    CLibSMSMessageWinHttpTransport::Send: URL: oursccmserver.ourcompany.com:80  GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    [TSMESSAGING] AsyncCallback(): -----------------------------------------------------------------    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    [TSMESSAGING] AsyncCallback(): WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    [TSMESSAGING]                : dwStatusInformationLength is 4
        TSPxe    26/03/2014 16:37:11    288 (0x0120)
    [TSMESSAGING]                : *lpvStatusInformation is 0x8
        TSPxe    26/03/2014 16:37:11    288 (0x0120)
    [TSMESSAGING]            : WINHTTP_CALLBACK_STATUS_FLAG_INVALID_CA is set
        TSPxe    26/03/2014 16:37:11    288 (0x0120)
    [TSMESSAGING] AsyncCallback(): -----------------------------------------------------------------    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    WinHttpReceiveResponse (hRequest, NULL), HRESULT=80072f8f (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8927)    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    failed to receive response with winhttp; 80072f8f    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    m_pHttpTransport->Send (0, 0, pServerReply, nReplySize), HRESULT=80072f8f (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,5159)    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    MPKeyInformation.RequestMPKeyInformationForMedia(szTrustedRootKey), HRESULT=80072f8f (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,9410)    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Failed to get information for MP: http://oursccmserver.ourcompany.com. 80072f8f.    TSPxe    26/03/2014 16:37:11    288 (0x0120)
    Jan Hoedt

    Hi,
    Have you check Mpcontrol.log on the MP server and Smspxe.log?
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Creating new OSD task sequence causes PXE boot to fail

    I'm running SCCM 2012 on Server 2008 R2. Currently we have a standard task sequence we use for all of our Windows 7 deployments that is working fine. We use PXE boot to load up WinPE to select the task sequence to load and all is good.
    I've made a new task sequence to deploy custom configuration settings to a group of computers. I've duplicated much of the original task sequence, using the same boot media. After i deploy the new TS to the All Unknown Computers collection, PXE boot does
    not work anymore.
    It downloads WDSNBP, starts by DHCP referral, contacts the server. After that I just get a Pending Request ID: number says contacting server then fails. If i go back to my new TS and delete the deployment, all is good again.
    Can i create a new task sequence using an existing reference image? Has anyone seen this type of issue before? I see similar issues online, but it seems to be for people that cannot PXE boot at all. My problem is just that the new task sequence seems to
    kill PXE boot when it's deployed.

    This is from the log file, looks like it can't find the boot image. I'm using the same boot image for both of the task sequences though.
    <![LOG[Set media certificate in transport]LOG]!><time="11:35:45.257+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:9220">
    <![LOG[Set authenticator in transport]LOG]!><time="11:35:45.257+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:7592">
    <![LOG[Set authenticator in transport]LOG]!><time="11:35:45.301+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:7592">
    <![LOG[Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName="" ServerRemoteName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
    ]LOG]!><time="11:35:45.359+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:6204">
    <![LOG[Set media certificate in transport]LOG]!><time="11:35:45.419+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:9220">
    <![LOG[Set authenticator in transport]LOG]!><time="11:35:45.420+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:7592">
    <![LOG[Set authenticator in transport]LOG]!><time="11:35:45.455+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:7592">
    <![LOG[PXE::CBootImageManager::FindMatchingArchitectureBootImage]LOG]!><time="11:35:45.508+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagemgr.cpp:1736">
    <![LOG[Getting boot action for unknown machine: item key: 2046820353]LOG]!><time="11:35:45.572+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="pxehandler.cpp:226">
    <![LOG[Set media certificate in transport]LOG]!><time="11:35:45.637+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:9220">
    <![LOG[Set authenticator in transport]LOG]!><time="11:35:45.637+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:7592">
    <![LOG[Set authenticator in transport]LOG]!><time="11:35:45.678+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:7592">
    <![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820353" ServerName="" ServerRemoteName=""><Machine><ClientID>44f40eda-b0b0-44ae-87e1-9b9464046c39</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="COL20062" OfferIDTime="20/02/2014 11:22:00 AM" PkgID="COL00086" PackageVersion="" PackagePath="http://TECH-SVR2.county-lambton.on.ca/SMS_DP_SMSPKG$/COL00045" BootImageID="COL00045" Mandatory="0"/></ClientIDReply>
    ]LOG]!><time="11:35:45.743+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:6402">
    <![LOG[Client Identity: 9ca0acb3-06b1-4737-9db0-1e4b75336ec9]LOG]!><time="11:35:45.743+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="libsmsmessaging.cpp:6428">
    <![LOG[PXE::CBootImageManager::FindMatchingArchitectureBootImage]LOG]!><time="11:35:45.743+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagemgr.cpp:1736">
    <![LOG[PXE::CBootImageManager::FindBootImage: COL00045]LOG]!><time="11:35:45.743+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagemgr.cpp:1652">
    <![LOG[Looking for bootImage COL00045]LOG]!><time="11:35:45.743+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagemgr.cpp:1686">
    <![LOG[PXE::CBootImageCache::FindImage]LOG]!><time="11:35:45.743+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagecache.cpp:657">
    <![LOG[MAC=9C:B6:54:A3:53:19 SMBIOS GUID=70DCD781-5008-11E4-8264-8BD5B90C0061 > Could not find an available image BootImageID=COL00045]LOG]!><time="11:35:45.743+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="pxehandler.cpp:2095">
    <![LOG[PXE::CBootImageManager::FindMatchingArchitectureBootImage]LOG]!><time="11:36:05.335+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagemgr.cpp:1736">
    <![LOG[PXE::CBootImageManager::FindBootImage: COL00045]LOG]!><time="11:36:05.335+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagemgr.cpp:1652">
    <![LOG[Looking for bootImage COL00045]LOG]!><time="11:36:05.335+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagemgr.cpp:1686">
    <![LOG[PXE::CBootImageCache::FindImage]LOG]!><time="11:36:05.335+300" date="02-20-2014" component="SMSPXE" context="" type="1" thread="4532" file="bootimagecache.cpp:657">

  • SCCM 2012: create user/group which can only import computers, reset pxe boots

    Hi,
    We would like to give helpdesk some basic rights so they can add computers (via mac/pc name) and reset pxe-boots.
    We might grant extra rights but would like to start with these basic ones.
    I know the setup is fully different (RBAC) so your feedback how you implemented this would be highy appreciated.
    J.
    Jan Hoedt

    You can use "Custom Role Based Administration for Importing Computers" (http://blogs.technet.com/b/inside_osd/archive/2012/04/30/custom-role-based-administration-for-importing-computers.aspx)
    as a starting point. Then use "RBA Viewer" (part of the toolkit) to create your own, custom roles.
    Torsten Meringer | http://www.mssccmfaq.de

  • SCCM 2012 R2 PXE Boot to Lenovo T540p 20BE

    Can someone help me PXE Boot a Lenovo T540/T440 laptop? Is there some type of settings that need to be changed in the BIOS or something?
    It keeps failing and Lenovo Phone Support could not tell me how to do it.
    I performed the following per Lenovo Tech Support:
    I first go into BIOS>Security>Secure Boot>Disabled
    Startup>UEFI/Legacy Boot>Legacy Only
    Restart>Load Setup Defaults>OS Optimized Defaults>Disabled
    I press FN + F12 to network book, this appears in 1 second:
    Your PC needs to be repaired
    The Boot Configuration data for your PC is missing or contain errors.
    File:\boot\bscd
    Error Code: 0xc000000f
    This occured on a brand new T540p out of the box. I am getting these on all 4 of my laptops that just arrived today. Can anyone help me out here or guide me to the right direction?
    Note: I downloaded the SCCM Package drivers from Lenovo Support site and updated my Boot Images x86 and x64, still nothing.

    I can create an USB OSD bootable media and that works just fine but I do not want to USB Boot image 30 machines over the course of this fiscal year...sigh

  • PXE Boot and Task Sequence slowness

    I have been assured that our subnet 10.10.156.x is all 100MB.   Yet when I PXE up and run our CM2012 task sequence it takes over 1 hour
    just to resolve the task sequence.  Forget trying to actually do the OSD since that would take about 6 hours.
    Before I go back to networking I wanted to explain what I did to this forum to make sure I did things right.  
    Our CM2012 server is also our one and only MP.  It is also a DP for most of our small company.   Our CM2012 server is on subnet 10.10.141.x.  Yes, it has a static IP address.   
    Our 10.10.156.x subnet is in the same phsycal building as the 10.10.141.x subnet.  .141 is for servers and .156 is for workstations.
    We have a server that holds all of our DHCP scopes.   On this DHCP server I found the 10.10.156.x scope.  I added the following:
    066 Boot Server Host Name:  10.10.141.54 (which is our CM2012 server)
    067 Bootfile name:  \smsboot\x64\wdsnbp.com
    When I go to any workstations on the 10.10.156.x subnet I PXE boot up, it does see 10.10.141.54 and it launches the CM2012 OSD task wizard.   But as I said it is slower than glue and un-useable at this time.
    Did I setup this up right or do I need to do something else?  Or is our networking team full of it?  
    mqh7

    Ok, I did that.   I saw no errors and in fact it all looked fine.  It just took a long time.  so I talked to our top network tech.  He said the IP address means nothing.  It is all about what the wall Ports are connected too in the
    server/network room.   So this does appear to be an internal networking problem we need to solve.
    last question:  If you have 100MB ports is that considered slow for a CM2012 OSD?  our .WIM and all installed applications are close to 5GB of data.   So is 100MB good or should it all be Gigibit?
    mqh7

  • Conundrum - PXE boot fails vs. "reinstall OS from software center" succeeds

    Hi All.
    I am facing a bit of a conundrum..
    In our offices I am seeing some strange behaviour when trying to PXE boot into a TS to reinstall or install OS. 
    If I use F12/PXE boot then the deployment fails during OSD.
    If I take a client (the same client as I tried pxe booting with) that is fully installed and reinstall OS via software center then the deployment completes. 
    Any ideas what could be wrong?
    Kindest regards, Martin

    Daniel:
    Clients are both laptops & desktops.
    I "feels" like it's the network that's acting up but I really can't see where. 
    PXE boot works.. it's not until it tries to apply the OS... 
    whether it's a timeout or what it is I cannot say.. 
    Gerry: After all will you be likely to rebuild your entire estate in-situ any time soon?
    You know... we are actually On the verge" of upgrading & Streamlining our entire network infrastructure..
    But I'd still love to solve the problem.. 
    We never had this issue when we only had MDT as deployment tool. 
    it's not until sccm came into the picture that this issue has arisen.
    Kindest regards, Martin

  • Can't PXE boot a Surface Pro 3 after already successfully imaging it

    hey guys. To try to eliminate a lot of the initial question that come up with this issue, I figure I will start with established info.  Our SCCM environment is healthy, and all images, drivers and apps are distributed to all of our DP's. We can image
    PC's and laptops with no issue at all. We use network PXE booting.  Using a 64 bit boot image. Needed drivers are injected into the boot image. Firmware on the Surface was updated.  Using the Surface NIC dongle. THis dongle was only used to image
    this Surface Pro 3 tablet one time. There is no record of the MAC of the dongle in SCCM since I deleted the Surface out, to make it an unknown again.
    So, with a lot of trial and error, I was finally able to get this tab to PXE boot, and then successfully image. Was testing out the new windows 8.1 image I had built.
    Since it ewas successful I wanted to add all of our apps to the TS and test them out in imaging. Well, I can no longer get this thing to PXE boot. It shows trying to Start PXE over IPv4, then just skips to IPv6, then boots up into windows.
    I have delted the secure keys form ther BIOS, then reloaded them.  I have tried hte full shut down method (Holding Volume Up and Power for 15 seconds, then waiting for 10 seconds or longer, then trying to PXE boot. I am getting a valid connection fro
    mthe dongle.
    Nothinhg I try works. Its tries to PXE boot over IPv4, but never gets there.  But I can PXE boot any of our PC's or Laptops,m so its just an issue with this damn Surface Pro 3.
    ANy advice?

    So I finally got our server guy to enable the logging and get that smspxe.log file to be accessible. So here is the info from the log, when I attempt to PXE boot the Surface. I see the last 2 lines where it ignores the request, I just don't know why its
    ignoring it.
    PXE::CNotifyTimer::TimerSignalFunc SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::ProcessTimer SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Potentially missed device 50:1A:C5:FE:D6:E9 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Cleared Old Devices: 1 / 1 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CBootImageManager::PerformMaintenenceTasks SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CBootImageManager::PurgeOldImages SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    Purging old images: 0 SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::Init SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::CancelTimer SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    PXE::CNotifyTimer::RegisterTimeout SMSPXE 4/14/2015 3:04:18 PM 8896 (0x22C0)
    [172.028.000.223:67] Recv From:[172.028.011.002:67] Len:347 1ad0230 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 1=DHCPDiscover
        Type = 57 Max DHCP Message Size: 05b8
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ProcessMessage: Context:0241DF40  dTime:0 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: DHCP Discover received. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    [172.028.000.223:67] Recv From:[172.028.011.003:67] Len:347 159d1f0 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 1=DHCPDiscover
        Type = 57 Max DHCP Message Size: 05b8
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:37 PM 5928 (0x1728)
    ProcessMessage: Context:0241DE50  dTime:0 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: DHCP Discover received. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Decompression (zlib) succeeded: original size 148, uncompressed size 298. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    MP_LookupDevice succeeded: 0 1 0 1 0 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: device is not in the database. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Getting boot action for unknown machine: item key: 2046820352 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Decompression (zlib) succeeded: original size 148, uncompressed size 298. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    MP_LookupDevice succeeded: 0 1 0 1 0 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: device is not in the database. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Getting boot action for unknown machine: item key: 2046820352 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Initialized CStringStream object with string: c7c22c7d-4f40-49f1-b7ed-871c18a07b05;2015-04-14T19:04:37Z. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set enterpirse certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Set media certificate in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  GET /SMS_MP_AltAuth/.sms_aut?MPKEYINFORMATIONEX SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Set authenticator in transport SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Setting message signatures. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Setting the authenticator. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    CLibSMSMessageWinHttpTransport::Send: URL: JAG-SCCM-01E.jonesapparel.com:443  CCM_POST /ccm_system_AltAuth/request SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    In SSL, but with no client cert SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Decompression (zlib) succeeded: original size 409, uncompressed size 950. SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>c70485df-9130-4b41-b61b-6c9e11b2f69a</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="10020125" OfferIDTime="4/2/2015 11:12:00 AM" PkgID="100000D0" PackageVersion="" PackagePath BootImageID="10000087" Mandatory="0"/></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Client Identity: c70485df-9130-4b41-b61b-6c9e11b2f69a SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: SMSID=c70485df-9130-4b41-b61b-6c9e11b2f69a OfferID=10020125, PackageID=100000D0, PackageVersion=, BootImageID=10000087, PackagePath=http://JAG-SCCM-01E.jonesapparel.com/SMS_DP_SMSPKG$/10000087, Mandatory=0 SMSPXE 4/14/2015
    3:04:37 PM 7484 (0x1D3C)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: found optional advertisement 10020125 SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    ============> Reply to client (DHCPDISCOVER): SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    DHCP message:
     Operation: BootReply (2)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 0
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 172.028.000.223
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 2=DHCPOffer
        Type = 54 Server idenitifier: 172.028.000.223
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 60 ClassIdentifier: PXEClient SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    <============ SMSPXE 4/14/2015 3:04:37 PM 7484 (0x1D3C)
    Request was successful. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ::DecompressBuffer(65536) SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Decompression (zlib) succeeded: original size 409, uncompressed size 950. SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820352" ServerName=""><Machine><ClientID>c70485df-9130-4b41-b61b-6c9e11b2f69a</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="10020125" OfferIDTime="4/2/2015 11:12:00 AM" PkgID="100000D0" PackageVersion="" PackagePath="xx
    BootImageID="10000087" Mandatory="0"/></ClientIDReply>
     SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    Client Identity: c70485df-9130-4b41-b61b-6c9e11b2f69a SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: SMSID=c70485df-9130-4b41-b61b-6c9e11b2f69a OfferID=10020125, PackageID=100000D0, PackageVersion=, BootImageID=10000087, PackagePath=http://JAG-SCCM-01E.jonesapparel.com/SMS_DP_SMSPKG$/10000087, Mandatory=0 SMSPXE 4/14/2015
    3:04:37 PM 7480 (0x1D38)
    50:1A:C5:FE:D6:E9, E65E7468-4CB9-210E-B760-54522B6A7E02: found optional advertisement 10020125 SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    ============> Reply to client (DHCPDISCOVER): SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    DHCP message:
     Operation: BootReply (2)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 0
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 172.028.000.223
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 2=DHCPOffer
        Type = 54 Server idenitifier: 172.028.000.223
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 60 ClassIdentifier: PXEClient SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    <============ SMSPXE 4/14/2015 3:04:37 PM 7480 (0x1D38)
    [172.028.000.223:67] Recv From:[172.028.011.003:67] Len:359 1acbeb0 SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    [172.028.000.223:67] Recv From:[172.028.011.002:67] Len:359 15a41f0 SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    ============> Received from client: SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    ============> Received from client: SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.003
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 3=DHCPRequest
        Type = 54 Server idenitifier: 172.028.000.015
        Type = 50 Requested IP: 172.028.011.052
        Type = 57 Max DHCP Message Size: ff00
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    DHCP message:
     Operation: BootRequest (1)
     Hardware Address type: 1
     Hardware Address Length: 6
     Hop Count: 1
     Transaction ID: 24038353
     Seconds Since Boot: 0
     Client IP Address: 000.000.000.000
     Your IP Address: 000.000.000.000
     Server IP Address: 000.000.000.000
     Relay Agent IP Address: 172.028.011.002
     Hardware Address: 50:1a:c5:fe:d6:e9:
     Magic Cookie: 63538263
     Options:
        Type = 53 DHCP Message Type: 3=DHCPRequest
        Type = 54 Server idenitifier: 172.028.000.015
        Type = 50 Requested IP: 172.028.011.052
        Type = 57 Max DHCP Message Size: ff00
        Type = 55 Paramerter Request List: 0102030405060c0d0f111216171c28292a2b3233363a3b3c4243618081828384858687
        Type = 97 UUID: 0068745ee6b94c0e21b76054522b6a7e02
        Type = 94 UNDI: 010310
        Type = 93 Client system Arch: 0007
        Type = 60 ClassIdentifier: PXEClient:Arch:00007:UNDI:003016 SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    <============ SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    <============ SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)
    Ignoring req from [172.028.011.003:67] Dest Server:[172.028.000.015] SMSPXE 4/14/2015 3:04:40 PM 5928 (0x1728)
    Ignoring req from [172.028.011.002:67] Dest Server:[172.028.000.015] SMSPXE 4/14/2015 3:04:40 PM 5972 (0x1754)

  • PXE boot no longer working - blank cmd windows shown. If run Scripts/Litetouch file from target machine wizards runs as expected??

    Hi, My MDT server no longer works as expected via PXE boot. After the target machine loads the .wim file an empty command windows is shown. I have returned the custom settings.ini and bootstrap files to default and ensured nothing is being skipped within
    the task sequence within both files in hope of viewing the wizard.
    However from the same target machine if I map drive to my Deploymentshare/Scripts directory and run LiteTouch file I am asked for domain credentials and the Deployment wizard is displayed asking for task sequence to be selected.
    I believe this error is a result of two things:
    1) I applied some windows updates to my mdt server (running on 2008 r2).
    2) I was implementing changes to
    ZTIWindowsUpdate.wsf   which i have now returned to default settings. 
    I have also regenerated boot images and re added to WDS.
    Any help much appreciated?
    Regards,
    Paul 

    Hi Paul,
    This sounds familiar; I only encounter this behaviour with certain kinds of laptops (Latitude E65x0) but I usually just provide the "wpeutil reboot" command in the empty command window to keep things going. All other hardware is deployed with the
    same task sequence and this behaviour does not occur anywhere else...
    A bit obvious maybe, but did you check if there is still a "Next Phase" step present and enabled following directly after the "Install Operating System" step? 

  • SCCM 2012 pxe boot issue

    My test machines cannot PXE boot.
    My lab environment is very simple:
    10.10.0.0/24 subnet
    10.10.0.5 = Server2012, DHCP, DNS, SQL Server 2008 R2 Sp2
    10.10.0.7 = Server2012, SCCM2012
    All machines are Oracle VM Box virtual machines connecting through the same virtual network.
    Setup the PXE service from DP properties.  I let SCCM install WDS.  WDS in Server
    Manager does not have a server node, but the WDS service is running.  DP PXE tab is configured as follows:
    "Enable PXE support for clients" is checked
    "Allow this distribution point to respond to incoming PXE requests" is checked
    "Enable unknown computer support" is checked
    "Require a password when computers use PXE" is not checked
    "User device affinity" is set to "Allow user device affinity with automatic approval"
    PXE is configured to respond on all network interfaces
    The PXE server response delay is 0 seconds
    The DHCP server has options configured as follows:
    Option 66: 10.10.0.7
    Option 67: smsboot\x86\wdsnbp.com
    Both DP and MP on SCCM server are configured for HTTP.
    Both x86 and x64 boot images have been distributed to DP.  The media was updated after
    PXE was enabled on the DP.
    Both x86 and x64 boot images have "Deploy this image from the PXE service point" enabled on the Data Source tab of their properties
    SMSPXE.Log
    <![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777219" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
    ]LOG]!><time="15:05:09.346-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="libsmsmessaging.cpp:6544">
    <![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: no advertisements found]LOG]!><time="15:05:09.346-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
    file="database.cpp:483">
    <![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: No boot action. Aborted.]LOG]!><time="15:05:09.441-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
    file="database.cpp:483">
    <![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: Not serviced.]LOG]!><time="15:05:09.441-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="database.cpp:483">
    <![LOG[Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777219" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification><PXEBootAction
    LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="" OfferIDTime="" PkgID="" PackageVersion="" PackagePath="" BootImageID="" Mandatory=""/></ClientIDReply>
    ]LOG]!><time="15:05:09.705-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592" file="libsmsmessaging.cpp:6544">
    <![LOG[08:00:27:61:59:79, BF2ACCDD-1455-E149-963C-9A845B9C111E: no advertisements found]LOG]!><time="15:05:09.705-330" date="07-07-2014" component="SMSPXE" context="" type="1" thread="13592"
    file="database.cpp:483">

    Resource ID is already present in the Unknown Computer (Windows 7) Properties please look into it and
    OSD Task Sequences is there :(.

Maybe you are looking for

  • Error reading special character in oracle

    Hi , I am Reading csv file into oracle(10.2.0.4) by using oracle procedure some character are showing ë is like ?,when we run select query . if we insert data by using insert query its not getting any problem,please help me how to read csv file and o

  • ILife '08 keeps quitting unexpectedly... HELP!!

    I am at a total loss!!... iPhoto, iMovie, iDVD... all "crashed"/quit unexpectedly... It is just not possible to keep any of these applications open... iPhoto, for example, opens, the application stays on screen for a little while.. Once I start "touc

  • Fail safe cannot move Group

    Hello, i have installed Windows 2003 with Microsoft Cluster and 4 Nodes, Oracle fail Safe 3.3.2. The Problem is i can move the Groups using MCSC but when i try to move a group with FS-Manager nothing is done. I press the button move group nothing hap

  • Source file difference : XI vs PI

    Hi , Wanted to check in our XI world when we used to get source file it used to show &apos instead of " ' " . In PI world ,it show " ' " and not &apos? can we change this display of characters to make XI look like PI ? Thanks

  • Mini Bridge won't launch in CS6

    I can't get mini bridge to launch in CS6. I tried deleting the switch board and that didn't work. Then I tried adding it to the firewall with no success. It is really frustrating me!