Restrict values in field catalog
hi,
i am displaying some records in alv grid. i want to restrict some valus i.e in my input select options i will give range values for example student 1 to student 3 (total 6 studnts)
i am calculating values and displaying it. It displaying calculated vales for studnt 1 2 3 and rest of the other values as '0.'
so in my requirment i shd get only 3 grid fields instead of 6.
how to restrict the fields in field catalog.
can any one give some guidence
Hi,
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = C_TABNAME1
I_STRUCTURE_NAME = C_TABNAME
CHANGING
CT_FIELDCAT = LT_FIELDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
IF <FS_FIELDCAT>-FIELDNAME = 'FIELD-NAME'.
<FS_FIELDCAT>-NO_OUT = C_FLAG.
ENDIF.
which ever field u want to hide just give in place of FIELD-NAME which helps u to hide or restrict fields.
hope this helps u..
regards..
anusha.
Similar Messages
-
Passing values for field catalog
Hi experts,
To pass values to fieldcatalog i need one practical example
Can anyone help me
Reg
R.Vijai*& Report ZSUJ
REPORT zsuj.
TYPE-POOLS: slis.
Data Declaration Section
DATA:wa_fieldcat_alv TYPE slis_fieldcat_alv.
DATA:it_fieldcat_alv TYPE slis_t_fieldcat_alv.
DATA:BEGIN OF itab OCCURS 0,
ch TYPE c,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
netwr TYPE vbap-netwr,
vkorg TYPE vbak-vkorg,
matnr TYPE vbap-matnr,
meins TYPE vbap-meins,
END OF itab.
DATA:BEGIN OF it_head OCCURS 0,
vbeln TYPE vbak-vbeln,
vkorg TYPE vbak-vkorg,
END OF it_head.
DATA:BEGIN OF it_item OCCURS 0,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
netwr TYPE vbap-netwr,
vkorg TYPE vbak-vkorg,
matnr TYPE vbap-matnr,
meins TYPE vbap-meins,
END OF it_item.
DATA:wa_keyinfo TYPE slis_keyinfo_alv.
DATA:it_events TYPE slis_t_event,
wa_event TYPE slis_alv_event.
DATA:it_listheader TYPE slis_t_listheader,
wa_listheader TYPE slis_listheader.
DATA:wa_sortinfo TYPE slis_sortinfo_alv,
it_sortinfo TYPE slis_t_sortinfo_alv.
DATA:wa_layout TYPE slis_layout_alv.
DATA: v_report TYPE sy-repid.
Selection Screen
SELECTION-SCREEN SKIP 3.
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : so_erdat FOR sy-datum.
PARAMETERS : r_list RADIOBUTTON GROUP rad1,
r_grid RADIOBUTTON GROUP rad1,
r_hier RADIOBUTTON GROUP rad1,
r_blck RADIOBUTTON GROUP rad1.
SELECTION-SCREEN : END OF BLOCK b1.
Start-of-selection.
START-OF-SELECTION.
IF r_list EQ 'X' OR r_grid EQ 'X'.
SELECT vbakvbeln vbapposnr vbapnetwr vbakvkorg vbapmatnr vbapmeins
INTO CORRESPONDING FIELDS OF TABLE itab
FROM vbak INNER JOIN vbap ON vbakvbeln = vbapvbeln
WHERE vbak~erdat IN so_erdat.
ELSEIF r_hier EQ 'X'.
SELECT vbeln FROM vbak INTO TABLE it_head
WHERE erdat IN so_erdat.
IF it_head[] IS NOT INITIAL.
SELECT vbeln posnr netwr matnr meins FROM vbap INTO TABLE it_item
FOR ALL ENTRIES IN it_head
WHERE vbeln = it_head-vbeln.
ENDIF.
ELSEIF r_blck EQ 'X'.
ENDIF.
Build Field Catalogue
IF r_list EQ 'X' OR r_grid EQ 'X'.
PERFORM build_catalog.
ELSEIF r_hier EQ 'X'.
PERFORM build_catalog1.
ELSEIF r_blck EQ 'X'.
PERFORM build_catalog2.
ENDIF.
Events
PERFORM get_events.
Build Comment
PERFORM buil_comment.
Sort Info on Table
PERFORM build_sortinfo.
Layout
PERFORM build_layout.
Key info for Heirarchical list.
PERFORM set_keyinfo.
v_report = sy-repid.
End-of-selection.
END-OF-SELECTION.
IF r_list EQ 'X'.
PERFORM list_display.
ELSEIF r_grid EQ 'X'.
PERFORM grid_display.
ELSEIF r_hier EQ 'X'.
PERFORM hier_display.
ELSEIF r_blck EQ 'X'.
PERFORM blockd_list.
ENDIF.
*& Form build_catalog
Build Field Catalogue.
FORM build_catalog .
DATA : c_pos TYPE i.
row_pos like sy-curow, " output in row
col_pos like sy-cucol, " position of the column
fieldname type slis_fieldname,
tabname type slis_tabname,
currency(5) type c,
cfieldname type slis_fieldname, " field with currency unit
ctabname type slis_tabname, " and table
ifieldname type slis_fieldname, " initial column
quantity(3) type c,
qfieldname type slis_fieldname, " field with quantity unit
qtabname type slis_tabname, " and table
round type i, " round in write statement
exponent(3) type c, " exponent for floats
key(1) type c, " column with key-color
icon(1) type c, " as icon
symbol(1) type c, " as symbol
checkbox(1) type c, " as checkbox
just(1) type c, " (R)ight (L)eft (C)ent.
lzero(1) type c, " leading zero
no_sign(1) type c, " write no-sign
no_zero(1) type c, " write no-zero
no_convext(1) type c,
edit_mask type slis_edit_mask, "
emphasize(4) type c, " emphasize
fix_column(1) type c, " Spalte fixieren
do_sum(1) type c, " sum up
no_out(1) type c, " (O)blig.(X)no out
tech(1) type c, " technical field
outputlen like dd03p-outputlen,
offset type dd03p-outputlen, " offset
seltext_l like dd03p-scrtext_l, " long key word
seltext_m like dd03p-scrtext_m, " middle key word
seltext_s like dd03p-scrtext_s, " short key word
ddictxt(1) type c, " (S)hort (M)iddle (L)ong
rollname like dd03p-rollname,
datatype like dd03p-datatype,
inttype like dd03p-inttype,
intlen like dd03p-intlen,
lowercase like dd03p-lowercase,
*ref_fieldname like dd03p-fieldname,
ref_tabname like dd03p-tabname,
roundfieldname type slis_fieldname,
roundtabname type slis_tabname,
decimalsfieldname type slis_fieldname,
decimalstabname type slis_tabname,
decimals_out(6) type c, " decimals in write statement
text_fieldname type slis_fieldname,
reptext_ddic like dd03p-reptext, " heading (ddic)
ddic_outputlen like dd03p-outputlen,
*key_sel(1) type c, " field not obligatory
no_sum(1) type c, " do not sum up
sp_group(4) type c, " group specification
reprep(1) type c, " selection for rep/rep
input(1) type c, " input
edit(1) type c, " internal use only
hotspot(1) type c, " hotspot
c_pos = 1.
wa_fieldcat_alv-col_pos = c_pos.
wa_fieldcat_alv-fieldname = 'CH'.
wa_fieldcat_alv-tabname = 'ITAB'.
wa_fieldcat_alv-outputlen = 2.
wa_fieldcat_alv-seltext_l = ' '.
wa_fieldcat_alv-no_out = ' '.
wa_fieldcat_alv-checkbox = 'X'.
wa_fieldcat_alv-edit = 'X'.
wa_fieldcat_alv-input = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
c_pos = c_pos + 1.
wa_fieldcat_alv-col_pos = c_pos.
wa_fieldcat_alv-fieldname = 'VBELN'.
wa_fieldcat_alv-tabname = 'ITAB'.
wa_fieldcat_alv-outputlen = 20.
wa_fieldcat_alv-seltext_l = 'Sales Doc'.
wa_fieldcat_alv-no_out = ' '.
wa_fieldcat_alv-hotspot = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
c_pos = c_pos + 1.
wa_fieldcat_alv-col_pos = c_pos.
wa_fieldcat_alv-fieldname = 'POSNR'.
wa_fieldcat_alv-tabname = 'ITAB'.
wa_fieldcat_alv-outputlen = 6.
wa_fieldcat_alv-seltext_l = 'Item'.
wa_fieldcat_alv-no_out = ' '.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
c_pos = c_pos + 1.
wa_fieldcat_alv-col_pos = c_pos.
wa_fieldcat_alv-fieldname = 'NETWR'.
wa_fieldcat_alv-tabname = 'ITAB'.
wa_fieldcat_alv-outputlen = 20.
wa_fieldcat_alv-seltext_l = 'Net Price in Doc Curr'.
wa_fieldcat_alv-no_out = ' '.
wa_fieldcat_alv-do_sum = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
c_pos = c_pos + 1.
wa_fieldcat_alv-col_pos = c_pos.
wa_fieldcat_alv-fieldname = 'VKORG'.
wa_fieldcat_alv-tabname = 'ITAB'.
wa_fieldcat_alv-outputlen = 6.
wa_fieldcat_alv-seltext_l = 'Sales Org'.
wa_fieldcat_alv-no_out = ' '.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
c_pos = c_pos + 1.
wa_fieldcat_alv-col_pos = c_pos.
wa_fieldcat_alv-fieldname = 'MATNR'.
wa_fieldcat_alv-tabname = 'ITAB'.
wa_fieldcat_alv-outputlen = 20.
wa_fieldcat_alv-seltext_l = 'Mat Invoiced'.
wa_fieldcat_alv-no_out = ' '.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
c_pos = c_pos + 1.
wa_fieldcat_alv-col_pos = c_pos.
wa_fieldcat_alv-fieldname = 'MEINS'.
wa_fieldcat_alv-tabname = 'ITAB'.
wa_fieldcat_alv-outputlen = 4.
wa_fieldcat_alv-seltext_l = 'UoM'.
wa_fieldcat_alv-no_out = ' '.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
ENDFORM. " build_catalog
*& Form build_fieldcat
Build Field Catalog.
--> p_col_pos : Column Position
--> p_fieldname : Field name
--> p_tabname : Table Name
--> p_outputlen : Output Length
--> p_seltext_l : Field Name
--> p_no_out : No Output flag
FORM build_fieldcat USING p_col_pos TYPE sy-curow
p_fieldname TYPE slis_fieldname
p_tabname TYPE slis_tabname
p_outputlen TYPE dd03p-outputlen
p_seltext_l TYPE dd03p-scrtext_l
p_no_out TYPE c
p_hotspot TYPE c.
wa_fieldcat_alv-col_pos = p_col_pos.
wa_fieldcat_alv-fieldname = p_fieldname.
wa_fieldcat_alv-tabname = p_tabname.
wa_fieldcat_alv-outputlen = p_outputlen.
wa_fieldcat_alv-seltext_l = p_seltext_l.
wa_fieldcat_alv-no_out = p_no_out.
wa_fieldcat_alv-hotspot = p_hotspot.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
ENDFORM. " build_fieldcat
*& Form top_of_page
Top_of_page
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XANSA_LOGO'
it_list_commentary = it_listheader
I_END_OF_LIST_GRID =
I_ALV_FORM = 'X'
ENDFORM. " build_heading
*& Form get_events
Events.
FORM get_events .
wa_event-name = slis_ev_top_of_page.
wa_event-form = 'TOP_OF_PAGE'.
APPEND wa_event TO it_events.
CLEAR wa_event.
ENDFORM. " get_events
*& Form buil_comment
text
FORM buil_comment .
REFRESH it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'H'.
wa_listheader-info = 'DEMO EXAMPLE'.
APPEND wa_listheader TO it_listheader.
ENDFORM. " buil_comment
*& Form build_layout
Layout Settings
FORM build_layout.
wa_layout-zebra = 'X'.
ENDFORM. " build_layout
*& Form build_sortinfo
Sort Information
FORM build_sortinfo .
spos like alvdynp-sortpos,
fieldname type slis_fieldname,
tabname type slis_fieldname,
up(1) type c,
down(1) type c,
group(2) type c,
subtot(1) type c,
up like alvdynp-sortup,
down like alvdynp-sortdown,
group like alvdynp-grouplevel,
subtot like alvdynp-subtotals,
comp(1) type c,
expa(1) type c,
obligatory(1) type c,
wa_sortinfo-fieldname = 'MEINS'.
wa_sortinfo-tabname = 'IT_DATA'.
wa_sortinfo-subtot = 'X'.
APPEND wa_sortinfo TO it_sortinfo.
CLEAR wa_sortinfo.
ENDFORM. " build_sortinfo
*& Form user_command
Handle User command
FORM user_command USING r_ucomm LIKE sy-ucomm rs_selfield TYPE slis_selfield.
SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDFORM. "user_command
*& Form LIST_DISPLAY
Data in List display
FORM list_display .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = v_report
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
I_STRUCTURE_NAME =
is_layout = wa_layout
it_fieldcat = it_fieldcat_alv
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = it_events
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " LIST_DISPLAY
*& Form GRID_DISPLAY
Data in Grid Display
FORM grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = v_report
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_fieldcat_alv
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = it_events
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GRID_DISPLAY
*& Form hier_display
Heirarchical display of Data.
FORM hier_display .
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
i_callback_program = v_report
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
is_layout = wa_layout
it_fieldcat = it_fieldcat_alv
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = it_events
IT_EVENT_EXIT =
i_tabname_header = 'IT_HEAD'
i_tabname_item = 'IT_ITEM'
I_STRUCTURE_NAME_HEADER = 'IT_HEAD'
I_STRUCTURE_NAME_ITEM = 'IT_ITEM'
is_keyinfo = wa_keyinfo
IS_PRINT =
IS_REPREP_ID =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IR_SALV_HIERSEQ_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab_header = it_head
t_outtab_item = it_item
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " hier_display
*& Form set_keyinfo
Set key information
FORM set_keyinfo .
wa_keyinfo-header01 = 'VBELN'.
wa_keyinfo-item01 = 'VBELN'.
ENDFORM. " set_keyinfo
*& Form BUILD_CATALOG1
text
--> p1 text
<-- p2 text
FORM build_catalog1 .
wa_fieldcat_alv-fieldname = 'VBELN'.
wa_fieldcat_alv-tabname = 'IT_HEAD'.
wa_fieldcat_alv-outputlen = 20.
wa_fieldcat_alv-seltext_l = 'Sales Doc'.
wa_fieldcat_alv-no_out = ' '.
wa_fieldcat_alv-hotspot = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'VBELN'.
wa_fieldcat_alv-tabname = 'IT_ITEM'.
wa_fieldcat_alv-outputlen = 20.
wa_fieldcat_alv-seltext_l = 'Sales Doc'.
wa_fieldcat_alv-no_out = ' '.
wa_fieldcat_alv-hotspot = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'POSNR'.
wa_fieldcat_alv-tabname = 'IT_ITEM'.
wa_fieldcat_alv-outputlen = 6.
wa_fieldcat_alv-seltext_l = 'Item'.
wa_fieldcat_alv-no_out = ' '.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'NETWR'.
wa_fieldcat_alv-tabname = 'IT_ITEM'.
wa_fieldcat_alv-outputlen = 20.
wa_fieldcat_alv-seltext_l = 'Net Price in Doc Curr'.
wa_fieldcat_alv-no_out = ' '.
wa_fieldcat_alv-do_sum = 'X'.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'MATNR'.
wa_fieldcat_alv-tabname = 'IT_ITEM'.
wa_fieldcat_alv-outputlen = 20.
wa_fieldcat_alv-seltext_l = 'Mat Invoiced'.
wa_fieldcat_alv-no_out = ' '.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
wa_fieldcat_alv-fieldname = 'MEINS'.
wa_fieldcat_alv-tabname = 'IT_ITEM'.
wa_fieldcat_alv-outputlen = 4.
wa_fieldcat_alv-seltext_l = 'UoM'.
wa_fieldcat_alv-no_out = ' '.
APPEND wa_fieldcat_alv TO it_fieldcat_alv.
CLEAR wa_fieldcat_alv.
ENDFORM. " BUILD_CATALOG1
*& Form BUILD_CATALOG2
text
FORM build_catalog2 .
ENDFORM. " BUILD_CATALOG2
*& Form blockd_list
text
FORM blockd_list .
ENDFORM. " blockd_list
I hope this will help u. -
Hi,
I am trying to display data from two different tables, say 3 fields from one table and 3 fields from other table. in alv grid format using classes and using method CALL METHOD go_grid->set_table_for_first_display
how can we build the field catalog for the internal table which consists of 6 fields from two different tables
thanks in advanceHello,
Please check,it is similar case.
FORM set_grid.
IF g_r_grid IS INITIAL.
CREATE OBJECT g_r_cont
EXPORTING container_name = 'CUST1'.
CREATE OBJECT g_r_grid
EXPORTING i_parent = g_r_cont.
g_r_variant = sy-repid.
Build Field Catalog
PERFORM build_field_catalog.
Exclude process options from ALV
PERFORM alv_excl.
setting ALV Grid layout
PERFORM alv_layo.
CALL METHOD g_r_grid->set_table_for_first_display
EXPORTING
is_layout = g_r_layo
is_variant = g_r_variant
it_toolbar_excluding = g_r_excl
i_save = 'X'
CHANGING
it_outtab = g_t_alv[]
it_fieldcatalog = g_t_fieldcat.
ENDIF.
ENDFORM. " set_grid
*Form Routine ID : build_field_catalog
*Form Routine Name : TO Build Field Catalog
*Outline : Subroutine for building the field catalog
*Argument : None
*Return Value : None
FORM build_field_catalog.
DATA : l_f_n TYPE i.
REFRESH g_t_fieldcat.
l_f_n = 0.
Add properties values to ALV Catalog
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MATNR' 'CHAR' l_f_n
text-001 'X' space ' ' 18 ' ' .
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'TXZ01' 'CHAR' l_f_n
text-002 'X' space 'X' 40 ' ' .
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MFRPN' 'CHAR' l_f_n
text-003 ' ' space ' ' 40 ' ' .
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'EBELN' 'CHAR' l_f_n
text-004 space space ' ' 10 ' ' .
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'EBELP' 'NUMC' l_f_n
text-005 space space ' ' 5 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'EINDT' 'DATS' l_f_n
text-006 space space ' ' 10 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MENGE' 'QUAN' l_f_n
text-007 space space ' ' 13 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MEINS' 'UNIT' l_f_n
text-008 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MENGE1' 'QUAN' l_f_n
text-009 space space ' ' 13 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'MEINS1' 'UNIT' l_f_n
text-010 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'LIFNR' 'CHAR' l_f_n
text-011 space space ' ' 10 'ALPHA'.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'NAME1' 'CHAR' l_f_n
text-012 space space 'X' 35 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'BSART' 'CHAR' l_f_n
text-013 space space ' ' 4 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'BEDAT' 'DATS' l_f_n
text-014 space space ' ' 10 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'AEDAT' 'DATS' l_f_n
text-015 space space ' ' 10 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'INSMK' 'CHAR' l_f_n
text-016 space space ' ' 1 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'WERKS' 'CHAR' l_f_n
text-017 space space ' ' 4 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'LGORT' 'CHAR' l_f_n
text-018 space space ' ' 4 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'EKGRP' 'CHAR' l_f_n
text-019 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PSTYP' 'CHAR' l_f_n
text-020 space space ' ' 1 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'LOEKZ' 'CHAR' l_f_n
text-021 space space ' ' 1 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'DISPO' 'CHAR' l_f_n
text-022 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PO_TEXT' 'CHAR' l_f_n
text-023 space space 'X' 10 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'BSGRU' 'CHAR' l_f_n
text-024 space space ' ' 3 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PRDHA1' 'CHAR' l_f_n
text-025 space space ' ' 18 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'VTEXT1' 'CHAR' l_f_n
text-026 space space 'X' 40 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PRDHA2' 'CHAR' l_f_n
text-027 space space ' ' 18 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'VTEXT2' 'CHAR' l_f_n
text-028 space space 'X' 40 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'PRDHA3' 'CHAR' l_f_n
text-029 space space ' ' 18 ' '.
l_f_n = l_f_n + 1.
PERFORM add_catalog USING 'VTEXT3' 'CHAR' l_f_n
text-030 space space 'X' 40 ' '.
ENDFORM. " build_field_catalog
*Form Routine ID : add_catalog
*Form Routine Name : To Add the Catalog for the ALV
*Outline : Subroutine to add properties values to ALV Catalog
*Argument : p_fname "Field Name
p_inttype "Intenal Type
p_col_pos "Column Position
p_coltext "Column Text
p_key "Key Field
p_hotspot "Hotspot Enabled
p_outlen "Internal Length
p_convexit "conversion exit name
*Return Value : g_t_fieldcat "Field Catalog Table
FORM add_catalog USING p_fname
p_inttype
p_col_pos
p_col_text
p_key
p_hotspot
p_lowercase
p_outlen
p_convexit.
CLEAR g_r_fieldcat.
g_r_fieldcat-fieldname = p_fname.
g_r_fieldcat-inttype = p_inttype.
g_r_fieldcat-col_pos = p_col_pos.
g_r_fieldcat-coltext = p_col_text.
g_r_fieldcat-hotspot = p_hotspot.
g_r_fieldcat-lowercase = p_lowercase.
g_r_fieldcat-outputlen = p_outlen.
g_r_fieldcat-key = p_key.
g_r_fieldcat-convexit = p_convexit.
APPEND g_r_fieldcat TO g_t_fieldcat.
ENDFORM. " add_catalog
*Form Routine ID : alv_excl
*Form Routine Name : ALV Exclude List
*Outline : Subroutine to exclude process options from ALV
*Argument : None
*Return Value : None
FORM alv_excl.
APPEND cl_gui_alv_grid=>mc_mb_sum TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_mb_subtot TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_graph TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_info TO g_r_excl.
APPEND cl_gui_alv_grid=>mc_fc_print_back TO g_r_excl.
ENDFORM. " alv_excl
*Form Routine ID : alv_layo
*Form Routine Name : alv_layo
*Outline : Subroutine to set alv layout
*Argument : None
*Return Value : None
FORM alv_layo.
g_r_layo-grid_title = text-100.
g_r_layo-cwidth_opt = g_c_mark.
g_r_layo-zebra = g_c_mark.
g_r_layo-no_rowmark = space.
g_r_layo-sel_mode = g_c_selmode.
ENDFORM.
Regards -
After add a field catalog,how can I post the field value to IPC??
Hi,experts,I've created a field catalog "ZPRD_CHANGED"(I ZPRD_CHANGED D D ZCHG_FLAG(CHAR1))in IMG pricing,and also assigned the value to it
in method "ITEM_COMMUNICATION_STRUCTURE" in mplementation "ZCRM_COND_COM_BADI" of BADI "CRM_COND_COM_BADI".
LIke this:
DATA: lr_obj type ref to ZL_BT115IT__ITEMS_CN00.
create object lr_obj.
CS_ACS_I_COM-ZPRD_CHANGED = lr_obj->zprd_chg_flg.
After that,in the java codings of user exit in IPC,I add below codings:
public BigDecimal overwriteConditionValue(
IPricingItemUserExit pricingItem,
IPricingConditionUserExit pricingCondition)
String prodchanged = pricingItem.getAttributeValue("ZPRD_CHANGED");
But it seems that it doesn't work,variable "productchanged" can not get the value posted from method "ITEM_COMMUNICATION_STRUCTURE" in mplementation "ZCRM_COND_COM_BADI".
What's the problem?Can anybody suggest??
Thanks in advance.
Jerry.Hi Jerry,
did you register the attribute in the customizing for the user exits? Transaction /SAPCND/UEASS. You need to register the attribute on Implementations and Formula level.
Best Regards,
Michael
P.S. Guess you are already aware of the userexit guide attached to note 809820. -
How to make the column red in field catalog if its value is negetive
i am displaying 25 columns in a field catalog ,
if the value of the cell is negative it should appear in red colour .
for ex,
mat.no custno value
1 10 10
<b>2 20 -10</b>
3 30 20
note:
only cell which is the intersection of second row and third column
should appear red .
not the whole row or columnHi Balaji,
Run this code for coloring specific coloum in a row when the value of that column is negative
REPORT zex34 .
TYPE-POOLS: slis.
INCLUDE <icon>.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
it_fieldcat1 TYPE slis_t_fieldcat_alv..
DATA: x_fieldcat TYPE slis_fieldcat_alv,
x_fieldcat1 TYPE slis_fieldcat_alv.
DATA: it_events TYPE slis_t_event,
x_events TYPE slis_alv_event,
i_program LIKE sy-repid.
x_events-name = 'END_OF_LIST'.
x_events-form = 'LIST_MODIFY_OUPUT'.
APPEND x_events TO it_events.
data : count type i,
calc1 type i value 1,
calc2 type i value 1,
TOTREC TYPE I.
DATA: BEGIN OF it_mara OCCURS 0,
matnr LIKE mara-matnr,
kunnr LIKE mara-kunnr,
value type i,
flag(1),
END OF it_mara.
SELECT matnr
kunnr
UP TO 10 ROWS
INTO corresponding fields of TABLE it_mara
FROM mara.
loop at it_mara.
count = sy-tabix mod 2.
if count eq 0.
it_mara-value = calc1.
calc1 = calc1 + 6.
it_mara-flag = ' '.
else.
calc2 = calc2 - 5.
it_mara-value = calc2.
it_mara-flag = 'X'.
endif.
modify it_mara index sy-tabix.
TOTREC = TOTREC + 1.
ENDLOOP.
i_program = sy-repid.
DATA:l_pos TYPE i VALUE 1.
CLEAR: l_pos.
l_pos = l_pos + 1.
x_fieldcat-seltext_m = 'MATNR'.
x_fieldcat-fieldname = 'MATNR'.
x_fieldcat-tabname = 'IT_MARA'.
x_fieldcat-col_pos = l_pos.
x_fieldcat-outputlen = '18'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
l_pos = l_pos + 1.
x_fieldcat-seltext_m = 'KUNNR'.
x_fieldcat-fieldname = 'KUNNR'.
x_fieldcat-tabname = 'IT_MARA'.
x_fieldcat-col_pos = l_pos.
x_fieldcat-outputlen = '10'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
l_pos = l_pos + 1.
x_fieldcat-seltext_m = 'VALUE'.
x_fieldcat-fieldname = 'VALUE'.
x_fieldcat-tabname = 'IT_MARA'.
x_fieldcat-col_pos = l_pos.
x_fieldcat-outputlen = '10'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
l_pos = l_pos + 1.
x_fieldcat-seltext_m = 'FLAG'.
x_fieldcat-fieldname = 'FLAG'.
x_fieldcat-tabname = 'IT_MARA'.
x_fieldcat-col_pos = l_pos.
x_fieldcat-outputlen = '1'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
l_pos = l_pos + 1.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = i_program
it_fieldcat = it_fieldcat
it_events = it_events
TABLES
t_outtab = it_mara
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form LIST_MODIFY_OUPUT
text
FORM list_modify_ouput.
DATA: l_matnr LIKE mara-matnr,
l_kunnr LIKE mara-kunnr,
l_value type i,
l_index TYPE sy-index.
CLEAR it_mara.
DO 20 TIMES.
CLEAR: l_matnr, l_kunnr , l_value.
READ LINE sy-index INDEX sy-lsind
FIELD VALUE it_mara-matnr INTO l_matnr
it_mara-kunnr INTO l_kunnr
it_mara-value into l_value.
*3lines are reserved for alv headings , so i am reading it form 4th
*line so 4th line is equal to 1st line of itab
IF sy-subrc = 0 AND sy-index GE 4.
l_index = sy-index - 3.
READ TABLE it_mara INDEX l_index.
IF sy-subrc = 0 AND it_mara-flag = 'X'.
*-Modifying current list
MODIFY LINE sy-index INDEX sy-lsind
FIELD FORMAT it_mara-VALUE COLOR 6 INVERSE.
ENDIF.
ENDIF.
ENDDO.
ENDFORM. -
Field catalog parameters for getting Domain values
Hi all,
Please tell me the field catalog parameter to be set to fetch the domain text values.
Thank you.Hello,
If u give the table name it will ge the field names with description
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = y_v_tabname
langu = sy-langu
TABLES
dfies_tab = y_i_dfiestab
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3. -
Hi Friends,
Please help me out, I am new to ABAP.
Please anybody explain me the functionality of Field catalogs in ALVs?
How many methods are there to pass data to ALVs, i.e., in how many ways?
Hope u will help me.hi,
this will be very helpful for ALV REPORTING.....
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain upto 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
The different steps used for getting the above function modules into use are:
Step 1
DATA DECLARATION
Sap standard type pools: SLIS , KKBLO .
Sap standard tables types taken from the type pools are: SLIS_LAYOUT_ALV ,
SLIS_T_FIELDCAT_ALV,
SLIS_T_LISTHEADER,
SLIS_T_EVENT,
SLIS_SELFIELD.
Internal tables to used in the program declared based on the above table types
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
I_HEADING TYPE SLIS_T_LISTHEADER,
I_EVENTS TYPE SLIS_T_EVENT.
TYPES: KKBLO_SELFIELD TYPE SLIS_SELFIELD.
Step 2 (Optional)
SELECTING THE VARIANTS FOR INITIAL LIST DISPLAY (DEFAULT VARIANT)
The variants in the list display can be both user-specific and general. The user can programmatically set the initial (default) variant for list display.
The default variant can be found using the function module 'REUSE_ALV_VARIANT_DEFAULT_GET'.
Sample code:
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = variant save condition ( A=all, U = user-specific )
CHANGING
cs_variant = internal table containing the program name (and the default variant---optional )
EXCEPTIONS
not_found = 2.
The user can also choose from the list of existing variants using the function module REUSE_ALV_VARIANT_F4.
Step 3
DEFININING OUTPUT CHARACTERISTICS: PREPARING DISPLAY FIELDS CATALOG
A field catalog is prepared using the internal table (I_FIELDCAT) of type SLIS_T_FIELDCAT_ALV. Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields).
A field catalog is required for every ALV list output to add desired functionality (i.e. Key, Hotspot, Specific headings, Justify, Col. position etc) to certain fields of the output. If not mentioned specifically, then the defaults are taken. The possible values and defaults are listed below.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module.
The minimal field catalog is documented below. This can be done in a routine using a local variable. The user can use the other optional parameters to assign output attributes to different fields in the output, which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
1. The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE. In this case the attributes of the different fields is taken directly from the table and the attributes (key fields, length, texts etc) need to state explicitly.
2. all fields in this structure are to be output
3. The structure name is passed to ALV in the parameter I_STRUCTURE_NAME of the function module REUSE_ALV_LIST_DISPLAY.
All the values entered in the catalog is specific to the particular field whose name is entered in the fieldname FIELDNAME of the fieldcat structure. The name of the table is also entered in the corr. Fieldname TABNAME of the structure.
The different possible attributes are:
Row_pos (row position): Only relevant if the list output is to be multi-line (two or three lines) by default. So, this attribute can be used maintain certain level of alignment in the output.
Value set: 0, 1 3
Col_pos (column position): This parameter is relevant when the fields in the output are to be different from the sequence of the fields in the internal table used for display. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the internal table field sequence.
Value set: 0, 1 60
Fieldname (field name): This is the name of the internal table field for which the parameters are passed in the catalog.
Value set: internal output table field name (required parameter)
Tabname (internal output table): Name of the internal output table that contains the field FIELDCAT-FIELDNAME above.
Value set: SPACE, internal output table name.
Ref_fieldname (reference field name): Name of the Data Dictionary field referred to. This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
Value set: SPACE, Data Dictionary field name.
Ref_tabname (reference table/structure field name): Structure or table name of the referred Data Dictionary field. This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Value set: SPACE, name of a Data Dictionary structure or table
Link to currency unit
Cfieldname (currency unit field name): This is used for currency fields that have a reference to any unit field. This is only relevant for amount columns with associated unit. This parameter contains the Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name
Ctabname (internal currency unit field output table): Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Value set: SPACE, output table field name.
Link to measurement unit
Qfieldname (measurement unit field name): Only relevant for quantity columns with unit link. Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME. The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
Value set: SPACE, output table field name.
Qtabname (internal measurement unit field output table): Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Value set: SPACE, output table field name.
Outputlen (column width): This parameter is used if the desired output length for a field is desired to be different from the internal output table field. For fields with a Data Dictionary link this parameter can be left initial. For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
Initial = column width is the output length of the referred Data Dictionary field (domain).
N = column width is n characters.
Value set: 0 (initial), n.
Key (key column): By default, the system makes some fields in the output as key fields, provided the fields are key fields in their referencing table. Using this parameter, fields other than key fields of the referencing table can be made key field. This parameter is most important if the output needs to contain some field which are not scrollable or cannot be hidden.
If the internal output table contains fields that are key fields from different tables, then all those fields in the report output becomes unscrollable and cannot be hidden. So, the fields in the output internal table should not be referenced from tables in which they are key fields. Instead, they should be referenced to the tables in which they are not key fields, incase they are not desired as key field in the output.
'X' = key field (key field output in color) and Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
Value set: SPACE, 'X'.
Key_sel (hideable key column): This parameter is only relevant for the fields which are made key fields using FIELDCAT-KEY = 'X'. Using this parameter the Key field can be hidden interactively.
The key column sequence cannot be changed interactively by the user. The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
Value set: SPACE, 'X'.
No_out (field in field list): This parameter is used to remove certain fields from the output during initial display. The user can however interactively choose the field for output from the field list in the display variant.
'X' = field is not displayed in the current list.
Value set: SPACE, 'X'.
Tech (technical field): This parameter is used to make certain field display only in the field catalog. The fields with this parameter set cannot be output in the list nor can they be displayed interactively from the catalog.
'X' = technical field.
Value set: SPACE, 'X'.
Emphasize (highlight columns in color): As name suggests, this field parameter is used to highlight certain field with chosen colors.
Value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off ,'1'=on).
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
- C: Color (coding must begin with C)
- X: color number
- Y: bold
- Z: inverse
Hotspot (column as hotspot): This parameter is used to make certain field appear as hotspot i.e. a hand is displayed if the cursor is positioned on the field value. Single click on such fields cause the PICK OR F2 events to happen.
Value set: SPACE, 'X'.
'X' = column cells are output as hotspots.
Fix_column (fix column): This parameter is used to fix certain columns in the output. All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively.
Value set: SPACE, 'X'.
'X' = column fixed (does not scroll horizontally).
Do_sum (sum over column): the user can also call this function interactively.
Value set: SPACE, 'X'.
'X' = a sum is calculated over this internal output table field.
No_sum (sums forbidden): No sum can be calculated over this field, although the data type of the field would allow summing.
Value set: SPACE, 'X'.
Icon: The parameter displays certain column contents as icons. The internal output table column contents must be valid icon strings.
Value set: SPACE, 'X'.
'X' = column contents to be output as an icon.
Symbol: The internal output table column must be a valid symbol character.
Value set: SPACE, 'X'
'X' = column contents are to be output as a symbol.
Just (justification): This parameter is used for alignment of the contents of the output table. This is only relevant for CHAR or NUMC fields in the output internal table. The justification of the column header always follows the justification of the columns. Independent justification of the column header is not possible.
Value set: SPACE, 'R', 'L', and C.
' ' = Default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output.
Lzero (leading zeros): By default ALV outputs NUMC fields right-justified without leading zeros. Using this parameter only the NUMC fields can be displayed with leading zeroes.
Value set: SPACE, 'X'.
'X' = output with leading zeros.
No_sign (no +/- sign): This parameter is used to suppress the signs of the output fields. It is only relevant for the value fields.
Value set: SPACE, 'X'.
'X' = value output without +/ sign.
No_zero (suppress zeros): Only relevant for value fields.
Value set: SPACE, 'X'.
'X' = suppress zeros.
Edit_mask (field formatting): To apply the report output formatting options same as in the WRITE statement in report writing.
Value set: SPACE, template.
The following parameters are used for customizing the texts in the heading of the output of the columns. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored.
If the user changes the column width interactively, the column header text with the appropriate length is always used.
The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition,
Sort, etc. Popup.
seltext_l (long field label)
seltext_m (medium field label)
seltext_s (short field label)
reptext_ddic(header) Analogous to the Data element main header
Ddictxt (specify text) : You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Value set: SPACE, 'L', 'M', and S.
Sample code:
Suppose I_PO_DETAILS is an internal table containing two fields EBELN (PO number) and EBELP (PO item no).
DATA: L_FIELDCAT TYPE SLIS_FIELDCAT_ALV. Local variable to hold the parameters
for a particular field of the field catalog
CLEAR L_FIELDCAT.
L_FIELDCAT-TABNAME = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'. The PO no is made the key field,
Colored and non scrollable
L_FIELDCAT-HOTSPOT = 'X'. The po no becomes a hotspot
L_FIELDCAT-SELTEXT_S = P.O No.
L_FIELDCAT-SELTEXT_M = 'P order No'.
L_FIELDCAT-SELTEXT_L = 'Purchase order No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
L_FIELDCAT-TABNAME = 'I_PO_DETAILS'.
L_FIELDCAT-FIELDNAME = 'EBELN'.
L_FIELDCAT-KEY = 'X'. The po item no is made the key field,
Colored and non scrollable
L_FIELDCAT-SELTEXT_S = 'Item No'.
L_FIELDCAT-SELTEXT_M = 'Item No`.
L_FIELDCAT-SELTEXT_L = 'PO Item No'.
APPEND L_FIELDCAT TO I_FIELDTAB.
CLEAR L_FIELDCAT
Thus the catalog for the report output is prepared.
Step 4
The next step is to build an event table, which are used for firing both user commands and the system dependent events i.e. top of page, end of page etc.
A list of possible events is populated into an event table (I_EVENTS) when this table is passed to the function module REUSE_ALV_EVENT_NAMES_GET. The return table from this function module contains all the possible events.
The function module contains following import and export parameters.
IMPORTING PARAMETERS: I_LIST_TYPE
This parameter has possible values from 0-4.
The parameter I_LIST_TYPE is of TYPE SLIS_LIST_TYPE and is DEFAULT 0 .
EXPORTING PARAMETERS: I_EVENTS table.
This table is of TYPE SLIS_T_EVENT and returns to the program the name of all the possible events.
The table structure contains the fields:
I_EVENTS-NAME: Name of the Callback event.
I_EVENTS-FORM: Name of the form routine that should be called in the calling program at the event.
Only events with a form routine name are processed.
The I_EVENTS table returns with the following possible constants:
1. Slis_ev_item_data_expand TYPE slis_formname VALUE 'ITEM_DATA_EXPAND'.
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT. Exit for passing item entries (ITEM table) for a header record that was expanded interactively by the user.
2. Slis_ev_reprep_sel_modify TYPE slis_formname VALUE 'REPREP_SEL_MODIFY'.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header that is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table.
RS_SELFIELD is initial in this case.
3. Slis_ev_caller_exit_at_start TYPE slis_formname VALUE 'CALLER_EXIT'.
Is called at the beginning of the function module to make special settings. It is not usually used.
4. Slis_ev_user_command TYPE slis_formname VALUE 'USER_COMMAND'.
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface by passing the user command in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
5. Slis_ev_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE'.
Equivalent to the list processing TOP-OF-PAGE event.
6. Slis_ev_top_of_coverpage TYPE slis_formname VALUE 'TOP_OF_COVERPAGE'.
The selection information and list status are output together (if they exist) on a separate page by default
7. Slis_ev_end_of_coverpage TYPE slis_formname VALUE 'END_OF_COVERPAGE'.
Analogously to TOP_OF_COVERPAGE the user can add other information
to the information output by ALV (selection information, list status) at this event.
8. Slis_ev_foreign_top_of_page TYPE slis_formname VALUE FOREIGN_TOP_OF_PAGE'.
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
9. Slis_ev_foreign_end_of_page TYPE slis_formname VALUE 'FOREIGN_END_OF_PAGE'.
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
10. Slis_ev_pf_status_set TYPE slis_formname VALUE 'PF_STATUS_SET'.
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status. As this is a frequently used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
11. Slis_ev_list_modify TYPE slis_formname VALUE 'LIST_MODIFY'.
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX.
12. Slis_ev_top_of_list TYPE slis_formname VALUE 'TOP_OF_LIST'.
Information output at the start of the list
13. Slis_ev_end_of_page TYPE slis_formname VALUE 'END_OF_PAGE'.
Information output at the end of a page. This is only called for printing.
14. Slis_ev_end_of_list TYPE slis_formname VALUE 'END_OF_LIST'.
Information output at the end of the list
15. Slis_ev_after_line_output TYPE slis_formname VALUE 'AFTER_LINE_OUTPUT'.
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
16. Slis_ev_before_line_output TYPE slis_formname VALUE 'BEFORE_LINE_OUTPUT'.
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
17. Slis_ev_subtotal_text TYPE slis_formname VALUE 'SUBTOTAL_TEXT'.
This event table (I_EVENTS) is now checked with the desired constants. If the desired constant is found, then the corresponding field for the FORM NAME is populated with the name of the routine containing the corresponding event.
Sample code :
FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE', FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA: L_I_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = I_EVENTS.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_TOP_OF_PAGE TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_END_OF_PAGE TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
CLEAR L_I_EVENT.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
INTO L_I_EVENT.
IF SY-SUBRC = 0.
MOVE FORMNAME_USER_COMMAND TO L_I_EVENT-FORM.
APPEND L_I_EVENT TO I_EVENTS.
ENDIF.
This will prepare the events table for the report.
The report will contain three forms for the above events:
1. FORM TOP_OF_PAGE : This form will contain the top of page event for the report i.e header etc
Using the function module REUSE_ALV_COMMENTARY_WRITE, the internal table containing the headings for top of page event can be passed to the list output. Also, any logo specific to the report can be passed to the function module.
2. FORM END_OF_PAGE : This form will contain the end of page event for the report i.e footer etc
3. FORM USER_COMMAND : This form will contain the desired user command i.e pick/line selection
Step 5
A layout is build for the report output list description USING the internal table declared above (I_LAYOUT).
Output list description structure.
The parameters are described under the following heads:
Display options
Exceptions
Totals
Interaction
Detail screen
Display variants (only for hierarchical-sequential lists)
Color
Other
The layout table is of type slis_layout_alv_spec and has the following fields:
Display options
1. Colwidth_optimize (1) TYPE c: This parameter optimizes the length of the different columns in the output. The width of the different col. now depends on the max. Length of the data in the column.
Value set: SPACE, 'X'
'X' = optimizes the column width so that all contents are displayed completely.
2. No_colhead(1) TYPE c : This parameter suppresses the column headings
Value set: SPACE, 'X'.
'X' = column headers are not output
3. No_hotspot(1) TYPE c : The heading of the report output are not output as hotspot.
Value set: SPACE, 'X'.
'X' = column headers are not output as hotspot
4. Zebra(1) TYPE c : The report is output in the striped pattern.
Value set: SPACE, 'X'.
'X' = striped pattern (e.g. for wide lists)
5. No_vline(1) TYPE c : The report output contains columns only separated by space and no lines. It is not relevant for: hierarchical-sequential lists and multiple-line lists.
Value set: SPACE, 'X'.
'X' = columns separated by SPACE
6. No_min_linesize(1) TYPE c : The report line size is equal to the width of the list. It is not relevant for block lists.
Value set: SPACE, 'X.
'X' = line size depends on list width
' ' = Line size is set to 80 or MIN_LINESIZE (if > 0) .
7. Min_linesize LIKE sy-linsz: The report output contains a minimum possible length of line. If initial min_linesize is set to 80 by default, then this parameter is used to customize it. The prerequisite for this is that the parameter no_min_linesize should be ' '.
Value set: 0, 10 - 250
If the list is wider, the format uses the list width (maximum 250 or MAX_LINESIZE (if > 0)).
8. Max_linesize LIKE sy-linsz: The default max. Linesize is 250. To change this default value, this parameter can interactively-define the maximum list width setting.
Value set: 0, 80 - 1020
9. Window_titlebar LIKE rsmpe-tittext: To set the titlebar on the report output.
10. No_uline_hs(1) TYPE c.
Exceptions
11. Lights_fieldname TYPE slis_fieldname: Internal output table field containing the codes of exceptions to be output.
Output table field code: '1' = red traffic light
'2' = yellow traffic light
'3' = green traffic light Fieldname for exception
Value set: SPACE, internal output table field name.
12. Lights_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter LIGHTS_FIELDNAME. If LIGHTS_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists. Only relevant for hierarchical-sequential lists.
. Value set: SPACE, internal output table name.
13. Lights_rollname LIKE dfies-rollname: The documentation of this data element is displayed when you call F1 help for an exception column.
Value set: SPACE, data element name.
14. Lights_condense(1) TYPE c : If a list record is output with 'red traffic light', each
Subtotal that includes this record is also output with 'red traffic light'.
Value set: SPACE, 'X'
'X' = the 'maximum' exception of the items in the subtotal is output at subtotal level.
Sums
15. No_sumchoice(1) TYPE c : This parameter allows the choice for summing up
Only by fieldcatalog.
Value set: SPACE, 'X'
'X' = fields which are to be summed, passed by the calling program (FIELDCAT-DO_SUM = 'X'). The user should not be able to change this value interactively.
16. No_totalline(1) TYPE c : Removes the option of having totals after sub-totals.
Value set: SPACE, 'X'
'X' = no total record is to be output. Subtotals can still be calculated and output. The fields in the subtotals are flagged DO_SUM = 'X' in the field list.
17. No_subchoice(1) TYPE c : Does not allow the user to interactively change the field chosen for subtotals.
Value set: SPACE, 'X'
'X' = value whose change triggers subtotals, provided by the calling program. The user should not be able to change this value interactively.
18. No_subtotals(1) TYPE c : No subtotals possible
Value set: SPACE, 'X'
'X' = no subtotals.
19. Numc_sum(1) TYPE c : Totals only possible for NUMC-Fields.
20. No_unit_splitting TYPE c: No separate total lines by inh.units
21.totals_before_items TYPE c: Display totals before the items
22. Totals_only(1) TYPE c : Show only totals
Value set: SPACE, 'X'
'X' = only total records are output.
23. Totals_text(60) TYPE c : Text for 1st col. in totals
Value set: SPACE, string (max.60)
' ' = The first column in the total record contains an appropriate number of '*'s to indicate the total by default. If the first column is wide enough, the string 'Total' is output after the asterisks.
'String = The string passed is output after the total indicated by '*', if the column is wide enough.
24. Subtotals_text(60) TYPE c : Texts for subtotals
Value set: SPACE, string (max.60)
' ' = In the first column of subtotal records, the subtotal is indicated by an appropriate number of '*' by default. If the first column is not a subtotal criterion, the string 'Total' is output after the asterisks, if the column is wide enough.
'String = the string passed is output after the subtotal indicated by '*', if the column is wide enough and the first column is not a subtotal criterion. If it is a subtotal criterion, its value is repeated after the total, if the column is wide enough.
Interaction
25. Box_fieldname TYPE slis_fieldname: Fieldname for checkbox in the report output. If the list has checkboxes at the start of records (for selecting several records), this parameter contains the internal output table field name indicated by the checkbox selection column. The field is a checkbox at the start of list records without a list header.
Value set: SPACE, internal output table field name
26. Box_tabname TYPE slis_tabname: Name of the internal output table that contains the field in the parameter BOX_FIELDNAME. If BOX_FIELDNAME is not empty, this field must also be filled for hierarchical-sequential lists.
Value set: SPACE, internal output table name.
27. Box_rollname LIKE dd03p-rollname: rollname for checkbox
28. Expand_fieldname TYPE slis_fieldname: fieldname flag expand. The user can show or hide the items by clicking on the folder symbol (hotspot). If the items for a header entry are only to be read by the calling program and passed to ALV when a header has been expanded interactively, this can be controlled via the CALLBACK event 'ITEM_DATA_EXPAND'.
29. Hotspot_fieldname TYPE slis_fieldname: Used to make the fieldname flag hotspot.
30. No_input(1) TYPE c : The fields are only display fields.
Value set: SPACE, 'X'
'X' = all ready-for-input fields in a list are displayed as not ready-for-input. (Record selection checkboxes and fields which can be made ready-for-input via the field list parameter FIELDCAT-INPUT = 'X')
31. F2code LIKE sy-ucomm: To assign an ALV standard function code to double-click (F2), assign the function code to this parameter. Ex.: to assign the ALV standard function 'Detail' ('&ETA') to F2.
=> LAYOUT-F2CODE = '&ETA'.
Value set: SPACE, function code
32. Confirmation_prompt: confirm. Prompt when leaving
Value set: SPACE, 'X'
'X' = if one of the functions Back (F03)', Exit (F15)' or Cancel (F12)' occurs, a confirmation prompt appears.
33. Key_hotspot(1) TYPE c : The key fields are displayed as hotspot. The columns defined in the field catalog as key fields (FIELDCAT-KEY = 'X') are output as hotspots, i.e. clicking on a key column (highlighted in color in the list) calls the function under F2.
Value set: SPACE, 'X'.
34. Reprep(1) TYPE c : report report interface active.
35. Group_buttons(1) TYPE c : group-buttons for COL1 - COL5 . Group output fields via FIELDCAT-SP_GROUP in the field list, and pass the group name to the list module in the interface parameter IT_SPECIAL_GROUPS.
Value set: SPACE, 'X'.
36. No_keyfix(1) TYPE c : Used to make the key fields scrollable.
Value set: SPACE, 'X'.
' ' = The key columns defined in the field catalog by FIELDCAT-KEY = 'X' are fixed in the list output. These columns do not scroll horizontally. The item table key columns are fixed in hierarchical-sequential lists. The header table key fields are not considered here.
'X' = key columns not fixed
37. Get_selinfos(1) TYPE c : To read selection screen.
Value set: SPACE, 'X'.
If the calling program is a report with an ABAP/4 selection screen, setting this parameter makes ALV read the selection screen again. If the selections are read successfully, a pushbutton, via which the user can call a popup which lists the report selections in a simple form, becomes active on the results list output by ALV.
38. group_change_edit(1) TYPE c : Settings by user for new group
Value set: SPACE, 'X'
'X' = the user can enter a format option for each sort criterion in the sort/subtotal popup, for the list format when this value changes (e.g. new page or underline).
39. No_scrolling(1) TYPE c : Does not allow scrolling of the list to the right.
Value set: SPACE, 'X'.
40. Expand_all(1) TYPE c : Expand all positions
Detailed screen
40. Detail_popup(1) TYPE c : show detail in popup.
Value set: SPACE, 'X'
' ' = List record detail display in full-screen mode, with top-of-page.
'X' = list record detail display in popup (without top-of-page).
41. Detail_initial_lines(1) TYPE c : show also initial lines
Value set: SPACE, 'X'
' ' = Only fields whose contents are not initial are output in the detail view.
'X' = initial field contents are also output in detail.
41. detail_titlebar(30) type c : Titlebar for detail screen
Value set: SPACE, string (max.30)
` ' = ' Detail: Display' is output as the title of the detail window.
'String = the string passed is output as the title of the detail window.
Display variants
42. Header_text (20) TYPE c: Text for header button. Only relevant for hierarchical-sequential lists. You can toggle between display field and field list views via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The header table field pushbutton text is 'Header' by default.
CHAR (20) = header table field pushbutton text.
43.item_text(20) TYPE c : Text for item button. Only relevant for hierarchical-sequential lists. You can toggle the view between the display fields and the field list via pushbuttons in the display variant definition popup for hierarchical-sequential lists. The views refer to the hierarchy level of the fields. This is technically a toggle between the header table and item table fields.
Value set: SPACE, CHAR (20)
' ' = The pushbutton text for the item table fields is 'Item' by default.
CHAR (20) = item table field pushbutton text.
44.default_ item(1) TYPE c : Items as default. Only relevant for hierarchical-sequential lists.
Value set: SPACE, 'X'
' ' = The header table fields are displayed by default in the display variant definition popup. The user can switch to the item table fields interactively.
'X' = the item table fields are displayed by default in the display variant Definition Popup. The user can switch to the header table fields interactively.
Colour
45. Info_fieldname TYPE slis_fieldname: infofield for listoutput. A whole list record can be colored individually using a color code in a column of the internal output table for the record. Assign the name of the field containing the color code to this parameter.
Value set: SPACE, internal output table field name
The internal output table field must be of type CHAR(3).
The code must have the following syntax: 'Cxy':
C = color (all codes must start with 'C')
X = color number ('1'-'9')
Y = bold ('0' = off, '1' = on)
46. Coltab_fieldname TYPE slis_fieldname: Cells can be colored individually using a color code which is contained in a column of the internal output table for the record containing the cell. Assign the name of the field to this parameter.
Others
47. List_append(1) TYPE c : no call screen. It is only useful to output block-lists without specifying the above modules if the number of list blocks exceeds, or may exceed, the maximum number specified in the block module documentation. These operations are not possible for user-defined block lists.
Example code :
I_LAYOUT-f2code = ws_fcode.
I_LAYOUT-zebra = 'X'.
I_LAYOUT-colwidth_optimize = 'X'.
I_LAYOUT-no_keyfix = 'X'.
I_LAYOUT-get_selinfos = 'X'.
I_LAYOUT-no_hotspot = 'X'.
I_LAYOUT-no_input = 'X'.
I_LAYOUT-hotspot_fieldname = FIELDNAME.
I_LAYOUT-no_input = X.
I_LAYOUT-no_vline = `X.
I_LAYOUT-no_colhead = .
I_LAYOUT-lights_condense = ` `.
I_LAYOUT-totals_text = ` `.
I_LAYOUT-subtotals_text = ` `.
I_LAYOUT-totals_only = ` `.
I_LAYOUT-key_hotspot = X.
I_LAYOUT-detail_popup = X.
I_LAYOUT-group_change_edit = X.
I_LAYOUT-GROUP_BUTTONS = X.
Step 6
This step is required to get the selection screen information in the report output.
The prerequisite for this is to set the parameter LAYOUT-GET_SELINFOS of the IMPORTING structure.
The parameters to be passed in the IS_SEL_HIDE table are:
o mode: 'R' = only the entries passed in the internal table IS_SEL_HIDE-T_ENTRIES
Are output in the pop up. Selection info, which the list tool read in the selection screen (when called by a report with a selection screen), is replaced by the values passed.
'S' = the selection info which the list tool read in the selection screen of the calling report are modified by the entries in the table IS_SEL_HIDE-T_ENTRIES.
o t_entries: Selection info table
o t_entries-mode: 'A' = output the selection info for the current table record in the info popup.
'D' = do not output select option or SELNAME parameter selection info in the popup.
o t_entries-selname: (only used in t_entries-mode = 'D') : Name of the select option or parameter.
The following table fields are only used in t_entries-mode = 'A'. They contain the selection information to be added.
t_entries-field: DDIC field name of the field for which selection information is to be output.
t_entries-table: DDIC table names of t_entries-field.
t_entries-stext: Field name in info popup.
If t_entries-field and t_entries-table have been entered, this text is taken from DDIC.
t_entries-valuf: Selection condition 'from' value (external format)
t_entries-valut: Selection condition 'to' value (external format)
t_entries-sign0: (I)nclusive (E)xclusive
t_entries-option: All values of the select options Option field allowed.
Step 6
The Table IT_SORT is populated with the sort criteria for the different fields.
The caller specifies the sorting and/or subtotaling of the basic list in the internal table IT_SORT.
This internal table has the following fields:
o spos : Sort sequence
o fieldname : Internal output table field name
o tabname : Only relevant for hierarchical-sequential lists. Name of the internal output table.
o up : 'X' = sort in ascending order
o down : 'X' = sort in descending order
o subtot : 'X' = subtotal at group value change
o group : '* ' = new page at group value change ,'UL' = underline at group value change
Step 7
The final step in the output of the report is the use of two ALV functions modules.
1. REUSE_ALV_FIELDCATALOG_MERGE
2. REUSE_ALV_LIST_DISPLAY
The first function module is used to pass the field catalog to the report output and merge it with the internal output table.
FUNCTION reuse_alv_fieldcatalog_merge.
""Lokale Schnittstelle:
* IMPORTING
*" VALUE(I_PROGRAM_NAME) LIKE SY-REPID OPTIONAL
*" VALUE(I_INTERNAL_TABNAME) TYPE SLIS_TABNAME OPTIONAL
*" VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*" VALUE(I_CLIENT_NEVER_DISPLAY) TYPE SLIS_CHAR_1
*" DEFAULT 'X'
*" VALUE(I_INCLNAME) LIKE TRDIR-NAME OPTIONAL
*" CHANGING
*" VALUE(CT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV
*" EXCEPTIONS
*" INCONSISTENT_INTERFACE
*" PROGRAM_ERROR
Import parameters
I_PROGRAM_NAME: Program in which the internal output table is declared and populated
I_INTERNAL_TABNAME: Internal output table name
I_STRUCTURE_NAME: Structure name (structure, table, and view)
I_CLIENT_NEVER_DISPL: Hide client fields default X
I_INCLNAME: Data declarations include name
CHANGING parameter
CT_FIELDCAT: Field catalog with field descriptions
The variant based on a program-internal table should only be used for rapid prototyping since the following restrictions apply:
1. Performance is affected since the code of the table definition must always be read and interpreted at runtime.
2. Dictionary reference are only considered if the keywords LIKE or INCLUDE STRUCTURE (not TYPE) are used.
Step 8
The other function module is used to display the internal output table with the contents
FUNCTION reuse_alv_list_display.
""Lokale Schnittstelle:
* IMPORTING
*" VALUE(I_INTERFACE_CHECK) DEFAULT SPACE
*" VALUE(I_CALLBACK_PROGRAM) LIKE SY-REPID DEFAULT SPACE
*" VALUE(I_CALLBACK_PF_STATUS_SET) TYPE SLIS_FORMNAME
*" DEFAULT SPACE
*" VALUE(I_CALLBACK_USER_COMMAND) TYPE SLIS_FORMNAME
*" DEFAULT SPACE
*" VALUE(I_STRUCTURE_NAME) LIKE DD02L-TABNAME OPTIONAL
*" VALUE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*" VALUE(IT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV OPTIONAL
*" VALUE(IT_EXCLUDING) TYPE SLIS_T_EXTAB OPTIONAL
*" VALUE(IT_SPECIAL_GROUPS) TYPE SLIS_T_SP_GROUP_ALV
*" OPTIONAL
*" VALUE(IT_SORT) TYPE SLIS_T_SORTINFO_ALV OPTIONAL
*" VALUE(IT_FILTER) TYPE SLIS_T_FILTER_ALV OPTIONAL
*" VALUE(IS_SEL_HIDE) TYPE SLIS_SEL_HIDE_ALV OPTIONAL
*" VALUE(I_DEFAULT) DEFAULT 'X'
" VALUE(I_SAVE) DEFAULT SPACE
" VALUE(IS_VARIANT) LIKE DISVARIANT
" STRUCTURE DISVARIANT DEFAULT SPACE
" VALUE(IT_EVENTS) TYPE SLIS_T_EVENT OPTIONAL
" VALUE(IT_EVENT_EXIT) TYPE SLIS_T_EVENT_EXIT OPTIONAL
" VALUE(IS_PRINT) TYPE SLIS_PRINT_ALV OPTIONAL
" VALUE(IS_REPREP_ID) TYPE SLIS_REPREP_ID OPTIONAL
" VALUE(I_SCREEN_START_COLUMN) DEFAULT 0
" VALUE(I_SCREEN_START_LINE) DEFAULT 0
" VALUE(I_SCREEN_END_COLUMN) DEFAULT 0
" VALUE(I_SCREEN_END_LINE) DEFAULT 0
" EXPORTING
" VALUE(E_EXIT_CAUSED_BY_CALLER)
" VALUE(ES_EXIT_CAUSED_BY_USER) TYPE SLIS_EXIT_BY_USER
" TABLES
" T_OUTTAB
" EXCEPTIONS
" PROGRAM_ERROR
Import parameters
I_INTERFACE_CHECK: Interface consistency check log output.
I_CALLBACK_PROGRAM: Name of the calling program
I_CALLBACK_PF_STATUS_SET: Set EXIT routine to status.
I_CALLBACK_USER_COMMAND: EXIT routine for command handling
I_STRUCTURE_NAME: Internal output table structure name
IS_LAYOUT: List layout specifications
IT_FIELDCAT: Field catalog with field descriptions
IT_EXCLUDING: Table of inactive function codes
IT_SPECIAL_GROUPS: Grouping fields for column selection
IT_SORT: Sort criteria for first list display
IT_FILTER: Filter criteria for first list output
IS_SEL_HIDE : Selection information modification
I_DEFAULT: Initial variant active/inactive logic
I_SAVE: Variants can be saved
IS_VARIANT : Variant information
IT_EVENTS: Table of events to perform IT_EVENT_EXIT : Standard fcode exit requests table
IS_PRINT: Print information
IS_REPREP_ID: Initialization keys for Re/Re interface
I_SCREEN_START_COLUMN: Coordinates for list in dialog box
I_SCREEN_START_LINE: Coordinates for list in dialog box
I_SCREEN_END_COLUMN: Coordinates for list in dialog box
I_SCREEN_END_LINE: Coordinates f -
ALV report using the field catalog
which is the quickest way to generate an ALV report using the field catalog merge. without needing to build the field catalog manually .
is it easier to create a structure and passe it in the field catalog merge . if yes can i have an example plzzzzhI
Supports the creation of the field catalog for the ALV function modules
based either on a structure or table defined in the ABAP Data
Dictionary, or a program-internal table.
The program-internal table must either be in a TOP Include or its
Include must be specified explicitly in the interface.
The variant based on a program-internal table should only be used for
rapid prototyping since the following restrictions apply:
o Performance is affected since the code of the table definition must
always be read and interpreted at runtime.
o Dictionary references are only considered if the keywords LIKE or
INCLUDE STRUCTURE (not TYPE) are used.
If the field catalog contains more than 90 fields, the first 90 fields
are output in the list by default whereas the remaining fields are only
available in the field selection.
If the field catalog is passed with values, they are merged with the
'automatically' found information.
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
Data declaration
Data retrieval
Build fieldcatalog
Build layout setup
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL -
Doubt in using field catalog merge function
hi all,
When I am using the function maodule reuse_alv_fieldcatalog_merge for building the field catalog in alv list,it was giving abend message as
'Field catalog is empty'.
what might be the reason for such message?can some one help me out with the solution to get rid of that.
I cant populate the catalog manually because I need to display nearly 40 fields in the output.
Thanks in advance.hI
Supports the creation of the field catalog for the ALV function modules
based either on a structure or table defined in the ABAP Data
Dictionary, or a program-internal table.
The program-internal table must either be in a TOP Include or its
Include must be specified explicitly in the interface.
The variant based on a program-internal table should only be used for
rapid prototyping since the following restrictions apply:
o Performance is affected since the code of the table definition must
always be read and interpreted at runtime.
o Dictionary references are only considered if the keywords LIKE or
INCLUDE STRUCTURE (not TYPE) are used.
If the field catalog contains more than 90 fields, the first 90 fields
are output in the list by default whereas the remaining fields are only
available in the field selection.
If the field catalog is passed with values, they are merged with the
'automatically' found information.
Below is an example ABAP program which will populate a simple internal table(it_ekpo) with data and
display it using the basic ALV grid functionality(including column total). The example details the main
sections of coding required to implement the ALV grid functionality:
Data declaration
Data retrieval
Build fieldcatalog
Build layout setup
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'. "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL -
Error in updating ALV field catalog in selection
Dear all,
I'm trying to use the standard transaction /SAPAPO/TSKEYFMAIN in order to check the TS values.
After filling the selection variant, the system shows the following error:
'Error in updating ALV field catalog in selection'
Could you please provide me with further details about the error? What could be the possible solution to avoid it?
Many thanks,
SMHi Marius,
thanks for your answer.
I would like to use the /SAPAPO/TSKEYFMAIN transaction to check massively the values in the time series KFs and not just the consistency of them.
So do you know any other transaction to do it or do you have an idea about the error of /SAPAPO/TSKEYFMAIN?
Thanks for your help!
SM -
Need to restrict values in F4 help for Batch Characteristic
Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
NikhilHi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens -
Field catalog in alv with classes(OOPS)
please refer the code below of field catalog prepared.
this code is for preparing field catalog using ALV and OOPS.In the below field catalog, do_sum is not working.it is going to dump.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'VBELN1'.
ls_fcat-ref_field = 'VBELN'.
ls_fcat-ref_table = 'VBRK'.
ls_fcat-coltext = 'Invoice No'.
ls_fcat-seltext = 'Invoice No'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'DMBTR'.
ls_fcat-ref_field = 'DMBTR'.
ls_fcat-ref_table = 'BSAD'.
ls_fcat-coltext = 'Value of Invoice'.
ls_fcat-seltext = 'Value of Invoice'.
ls_fcat-do_sum = 'X'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR ls_fcat.
ENDFORM. "PREPARE_FIELD_CATALOG
I would apreciate u response.
regards,
veera.Hello Veeranjaneyulu
I prefer to use function module <b>LVC_FIELDCATALOG_MERGE</b> to build my fieldcatalogs.
If you need fields from different structure that is no problem. Simply call the function module for each structure and collect the result in the same itab (e.g. lt_fcat).
Finally, you delete all fields that you do not need.
If the order is important to you then re-order the fields:
LOOP AT lt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY lt_fcat from ls_fcat.
ENDLOOP.
Regards
Uwe -
"Field Catalog not found" ...problem in ALV reporting !!
Hi,
When i execute my report program where in I generate a Selection screen, I am able to select the values in the selection screen. Once I click on the execute button I get the message
"Field Catalog not found"...
The elabore message is
"Field Catalog cannot be determined becaus the output table structure name was not specified"
Where am I wrong ??
Find below my code ...
*& Report Z_MIGO_TXJCD_REPORT
REPORT Z_MIGO_TXJCD_REPORT.
TYPE-POOLS: slis.
TABLES: makt,mseg,zmigo_extend,ttxj,mkpf.
DATA: BEGIN OF migo_data OCCURS 0,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
lgpla LIKE mseg-lgpla,
bwart LIKE mseg-bwart,
menge LIKE mseg-menge,
dmbtr LIKE mseg-dmbtr,
budat LIKE mkpf-budat,
txjcd LIKE zmigo_extend-txjcd,
END OF migo_data.
DATA: it_cat TYPE slis_t_fieldcat_alv,
wa_lay TYPE slis_layout_alv.
FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
SELECT-OPTIONS: so_matnr FOR makt-matnr,
so_budat FOR mkpf-budat,
so_werks FOR mseg-werks,
so_lgpla FOR mseg-lgpla,
so_bwart FOR mseg-bwart,
so_txjcd FOR ttxj-txjcd.
START-OF-SELECTION.
SELECT amatnr awerks algpla abwart
amenge admbtr bbudat ctxjcd INTO TABLE
migo_data
FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
zmigo_extend AS c ON amblnr = cmblnr
WHERE a~matnr IN so_matnr
AND b~budat IN so_budat
AND a~werks IN so_werks
AND a~lgpla IN so_lgpla
AND a~bwart IN so_bwart
AND c~txjcd IN so_txjcd.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-cprog
i_internal_tabname = 'migo_data'
i_inclname = sy-cprog
CHANGING
ct_fieldcat = it_cat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
LOOP AT it_cat ASSIGNING <fs_cat>.
CLEAR <fs_cat>-key.
ENDLOOP.
wa_lay-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = 'MIGO report with Tax Jurisdiction Code'
is_layout = wa_lay
it_fieldcat = it_cat
TABLES
t_outtab = migo_data
EXCEPTIONS
program_error = 1
OTHERS = 2.Give 'migo_data' in uppercase as ''MIGO_DATA'.
-
New field in Pricing field catalog for Item category
Dear SD colleagues,
We have scenario of maintaining pricing for Lower level BOM component.
Like:
Base price - 100/-
When BOM explodes - 95/-.
For this, I have taken ABAPer help and inseted a Z field for Item category in Pricing field catalog.
Then, a new condition table is been generated using ZPSTYV and included in Access sequence. For Base price condition type, we have maintained record in combination with ZBOM-Item category for lower level BOM item.
A new pricing routine is created in VOFM for Condition value and same is been assigned to Condition type as Alternative calculation type in pricin gprocedure contro data.
Whe I create Sales order, value based on ZBOM is being pciked up by system.
request you to please help in this regard.
Thanks & regards,
Praveen.Hi Marino,
I have a requirement to determine the pricing based on "Discount Code", which is not a standard SAP field and i would like to have this as a custom field and linked to customer in custom table.
Question: When i add a new custom field and custom table for pricing, what are all the things i need to do in terms of ABAP.
As per my knowledge, below are the steps...Please check and confirm my understanding is correct and let me know if i miss anything.
1. Create a new field
2. Create Custome Table
3. Add field to Field Catlogue KOMG
4. Add Field to KOMP (as this is item field)
5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Sales Order
5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Billing
Thanks. -
Adding field in field catalog and to display in output
Hi, In this below report i have newly added the user group field i.e' usr02-class ' and the field and data is coming up to internal table ' it_usr02 ' in 'REUSE_ALV_GRID_DISPLAY' and in field catalog it is not coming i have debugged and only the class field is not coming. plz suggest me how to add this in fieldcatalog .
REPORT zrpbc_user_log.
Declaration of Tables *
TABLES: usr02,usr03.
DATA:
BEGIN OF it_usr02 OCCURS 0,
bname LIKE usr02-bname, "EID
class LIKE usr02-class, "User Group
trdat LIKE usr02-trdat, "Last Logged in Date
*Start of Change Charm 25971
name1 LIKE usr03-name1, "First Name
name2 LIKE usr03-name2, "Last Name
e_mail LIKE bapiaddr3-e_mail,"Emailid
*End of Change Charm 25971
END OF it_usr02.
DATA: w_address TYPE bapiaddr3,
it_return TYPE STANDARD TABLE OF bapiret2,
w_name LIKE bapibname-bapibname.
TYPE-POOLS: slis.
DATA it_fcat TYPE slis_t_fieldcat_alv.
DATA : w_fcat TYPE slis_fieldcat_alv.
Declaration of Constants *
CONSTANTS: c_past_days TYPE i VALUE 90.
Declaration of Variables *
DATA w_repid LIKE sy-repid.
DATA w_no_lines LIKE sy-tabix.
DATA w_idx TYPE sy-tabix.
Selection Screen *
SELECT-OPTIONS:
s_trdat FOR usr02-trdat.
INITIALIZATION *
INITIALIZATION.
PERFORM initialize_data.
Start of Selection *
START-OF-SELECTION.
*Get the user details
PERFORM get_user_details.
End of Selection *
END-OF-SELECTION.
PERFORM get_alv_display.
*& Form initialize_data
text
FORM initialize_data .
"Initialize the select options with the appropriate date range
s_trdat-low = sy-datum - c_past_days.
s_trdat-high = sy-datum.
s_trdat-sign = 'I'.
s_trdat-option = 'BT'.
APPEND s_trdat.
ENDFORM. " initialize_data
*& Form get_user_details
text
FORM get_user_details .
read data into table it_usr02
SELECT bname class trdat
FROM usr02
INTO TABLE it_usr02
WHERE
trdat IN s_trdat AND
bname LIKE 'E%'.
LOOP AT it_usr02.
w_idx = sy-tabix.
MOVE : it_usr02-bname TO w_name.
*Start of Change Charm 25971
Getting the First ,Last name & Emailid of the user
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
EXPORTING
username = w_name
IMPORTING
address = w_address
TABLES
return = it_return.
MOVE : w_address-firstname TO it_usr02-name1,
w_address-lastname TO it_usr02-name2,
w_address-e_mail TO it_usr02-e_mail.
MODIFY it_usr02 INDEX w_idx.
ENDLOOP.
*End of Change Charm 25971
ENDFORM. " get_user_details
*& Form get_alv_display
text
FORM get_alv_display.
w_repid = sy-repid.
PERFORM get_alv_fieldcat.
Create Field-catalogue from internal table
Call for ALV list display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = w_repid
it_fieldcat = it_fcat
i_save = 'A'
TABLES
t_outtab = it_usr02
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: /
'Returncode'(001),
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'(002).
ENDIF.
ENDFORM. " get_alv_display
*& Form get_alv_fieldcat
text
FORM get_alv_fieldcat .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = w_repid
i_internal_tabname = 'IT_USR02'
i_inclname = w_repid
CHANGING
ct_fieldcat = it_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE: /
'Returncode'(001),
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'(002).
ENDIF.
*Start of Change Charm 25971
w_fcat-reptext_ddic = 'Firstname'(003).
MODIFY it_fcat FROM w_fcat TRANSPORTING reptext_ddic
WHERE fieldname = 'NAME1'.
w_fcat-reptext_ddic = 'Lastname'(004).
MODIFY it_fcat FROM w_fcat TRANSPORTING reptext_ddic
WHERE fieldname = 'NAME2'.
*End of Change Charm 25971
ENDFORM. " get_alv_fieldcatPlease dont DUPLICATE the Posts. Its against the Forum Rules.
Close any one theard.
Duplicate Post:
In this Report i want to add class field in usr02 table
Regards,
Padma
Maybe you are looking for
-
Hi, I am doing a Mass Conversion Program for One Orders in CRM. I am creating Service Orders based on incoming .CSV File. Which Function Module is better for Upload of Mass data Performance wise. 'CRMXIF_ORDER_SAVE' Function Module or 'BAPI_BUSP
-
When saving my Adobe CS6 InDesign document, why does it save as an Adobe Illustrator document?
When I click "Save As" it looks as if it will save it as an indd document, but in fact it saves as an AI document. However, when I double click the icon, it tries to open in Illustrator, but then I get an error message stating it cannot open the doc
-
MSA copying activity: flag 'main team member' not set automatically
Hello forum, when I copy an activity in msa, the responisble persons are copied too, but saving is not possible: error: flag main team member not set So i have to set this flag manually. Why does the system not copy this flag too ? Where can I change
-
The adobe was working fine yesterday but now when I open the file all I get is a black blob of ink on screen where previously I had information Yours
-
Will not open some pdf's from certain people
I belong to a yahoo group and we share pdf's back and forth very frequently. I have at this point 3 seperate email addresses that I cannot open their pdf's. Nobody else appears to have any issue with these pdf's. Having said that, these are the on