MSA copying activity: flag 'main team member' not set automatically

Hello forum,
when I copy an activity in msa,
the responisble persons are copied too, but saving is not possible:
error: flag main team member not set
So i have to set this flag manually.
Why does the system not copy this flag too ?
Where can I change this bad behaviour ?
Thanks
Gerd

Hello,
did you already check the following:
1) activities created in CRM have this main flag set properly for exactly one responsible employee defined for this function
2) customizing is synchronized properly to CDB/Mobile:
CRM_DNL_PAR_FCT
CRM_DNL_PAR_PDD
CRM_DNL_PAR_PDP
CRM_DNL_PAR_UIS
3) activities downloaded to mobile have this main flag set properly for exactly one responsible employee defined for this function
4) it is possible to create the same activities in mobile as in CRM using the same functions (e.g. the customizing is proper on mobile)
For my understanding I would rather suggest to change/correct the data in CRM instead of modifying the copy functionality for mobile.
Regards,
Wolfhard Bierlein

Similar Messages

Find Active Directory Attributes that are Not Set

I'm trying to generate a report that lists all accounts where the thumbnailPhoto attribute in Active Directory is not set. I've tried using WHERE thumbnailPhoto < 0, WHERE IsNULL({thumbnailPhoto}) and several others with no success. Can anyone point me in the right direction?

Hi,
1) What version of Crystal Reports are you using?
2) Are you using a SQL Query to report against the Active Directory?
3) What is the datatype of the 'thumbnailPhoto' field?
-Abhilash

FormsCentral e-mail invite to be a team member not working

We are trying to add a member to our Forms Central team. However, he isn't receiving the e-mails inviting him to the website. His status shows him as "invited." I made him a form response receiver and contribitutor to a form I created, and it goes to his account but it does not see him as a member and his account remains as a "free" one instead of associating him to the paid team account we have. We have been successfull setting other members up to our account, but for some reason we're unable to get him set up. Please help.

All of our staff has that type of format: [email protected] and all of
them have been successful. I've included a screen shot below of our team
members. Our buyer and administrator have attempted adding and removing him
multiple times without success of him receiving the e-mails.
image: Inline image 1
Thanks,
Renee Rinehart
MIS Coordinator
Colorado Department of Labor and Employment
633 17th Street, Suite 700 | Denver, Colorado 80202
(303) 318-8834
www.colorado.gov/cdle
CDLE: “We Keep Colorado Working”

I could not set Automatic SQL Tuning enabled

Hi experts,
I execute below command by sys user.
BEGIN
dbms_auto_task_admin.enable(client_name => 'sql tuning advisor', operation => NULL, window_name => NULL);
END;
It occur error:
ORA-15604: Initialization parameters prevent client from being enabled.
ORA-06512: at "SYS.DBMS_AUTO_TASK_ADMIN", line 23
ORA-06512: at "SYS.DBMS_AUTO_TASK_ADMIN", line 122
Thanks!
Joseph.

Hi P. Forstmann ,
Yes , I have the license.
SQL> show parameter control_m
NAME TYPE VALUE
control_management_pack_access string DIAGNOSTIC+TUNING
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Rds,Joseph.

IT team will not establish student accounts - HELP

I am a music teacher at a middle school in an almost all Mac environment. The IT team will not set up individual student accounts, so all my iTunes and iPhoto libraries are all mixed together. Everyone logs in with generic local login. I keep saying that this doesn't make sense. We need individual student network accounts. Is this really so hard? We have OSX server handling the network.
eMacs, iMacs (pre-Intel) Mac OS X (10.4.9)

If you have OS X Server managing the network and the IT Team won't let your users have accounts on there properly (as others have already said) then you need to be a bit more forceful about the whole thing. Logging in with one shared (generic) account is nothing short of mayhem in a school environment. As a Senior Systems Manager at a large secondary school in the UK I can tell you that reverting to snail-net for tasks such as you are describing is ludicrous and definitely a "CLM" (Career Limiting Move).
Sit down with the IT Team and Head Teacher, minute the meeting, and lay out why you think you need students to have real accounts on the Macs. A generic account on a so-called "managed" Apple network is almost an oxymoron! There is nothing to manage. So perhaps it would be correct to assume the team doesn't have the skills necessary to implement what you want- and the school so obviously- needs. That's OK. Get them on a training course or two.
In any case, get them to outline why they think having a generic account for user logons is better than having separate and discreet user accounts. Should make for some interesting reading if nothing else!
Good luck!!
Paul

Initial Work status not set autmoatically for new created member

Hi,
if we create a new budget version, and process the category dimension we notice that the first work status (locked in our scenario) is not set automatically by default... As a result users can still input data for the new budget version. Only if we first change the work status of the new budget version (and put it back), the work status can be applied ...
Is this normal behavior?
Dries

Yes, I think what you're seeing is "normal" behavior -- it may not be what you want, though. In fact, I don't think this issue is limited to your creating a new member. It also applies to the existing members of your work status dimensions.
I had one project like this, where the customer wanted the default work status to be locked, and then for the finance administrator to explicitly open up the category & time period for users. We never got it to work in a really clean manner.
For the work status check to take effect, there must be records in the tblFinanceLock table (where Finance is the applcation name). And the only way that records normally get into that table is by changing the work status manually. We played around with a SQL script to populate that table, to automatically set the status to the first level (locked), but never found something that we were comfortable with.
I'd be curious to hear if someone's made something like that work well.

My Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

my Iphone 4 will not start up, when i connect it to itunes i says : Activation error This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Port

Well, you downloaded a bootleg copy of iOS 7 beta and have installed it on your phone without being a developer. It has bricked your phone and you cannot get help here because doing what you did has voided your warranty. Have a nice day.

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN A

Hello my name is jose quant, and let me know how I can use CAMERA RAW adobe bridge because the bridge use and want to open a camera raw image, I get a message that says: MAIN BRIDGE aplicaion NOT ACTIVATED. BRIDGE REQUIRES A PARTICULAR PRODUCT HAS BEGUN AT LEAST ONCE TO ACTIVATE THIS FEATURE. I wonder what that means?
I use a lapto (windows 7) 64-Bit operating system.
Thank you,
my email is: [email protected], if you send me the answer to my query

You need to activate Photoshop.
Mylenium

How do I copy just the main region of a looped region & not the loops?

How do I copy just the main region of a looped region & not the looped bits?
Sometimes on the last iteration of a loop, I want to make a slight change in the notes, and therefore need to insert and actual copy. When I copy the original region and paste it, it overwrites everything that follows...deleting a whole bunch of arranging that I just did. Is there a command to copy only the original region? Otherwise I have to unloop the region, copy, insert, and reloop the region. Thanks

Either you have a lot of Pages breaks which you can delete or you have aded a Pages break which you also can delete. Turn on the invisible characters View > Show Invisibles. You will see blue characters.

Facing the error : Status and active flag in one item do not match

Hi Experts,
I am getting error : Status and active flag in one item do not match in GOA distribution and while adding item in the item data , following are the relative information :
I am using SRM 4.0 and Item is free text.
Please help if you have faced such an error.
Thanks,
Atul

question not clear. you have activate one line item and the same not in ECC contract.
for ex
4600001000 - GOA
item 1 - active
ecc
4600001000 - contract
item - inactivate
-locked
muthu

UCCE CTIOS supervisor not showing the team member

Hello,all. We have ICM 8.0(2) duplex environment. The CTIOS supervisor toolkit is not showing the most updated team member information. It's still showing the old team member who was removed already and not showing the newly added ones. Do we need to restart the CTIOS server when we change the team assignments? The webview report is showing the correct information though.
Thanks.

Hello,
I have seen this happen before. lookup how to execure an OPC exit (this will cause a temp outage in your contact center).... This will resync the team's..
It should just work normally however
Chad

Create Project trough enterprise project type with templates does not send notification to team member(email) when published

Hi All,
I encountered this issue in my client site when implementing project server 2013.
At First I thought that this issue occurred intermittently , sometimes project creation (create project from PWA- assign resources with team member -save and publish) trigger email notification to the assigned team member and sometimes not. (new task notification)
I have checked with our infrastructure team and verify that I use the right SMTP server address and port , and cross check with them for their side configuration (exchange) , we did not find anything wrong on both settings.
and then we found out that the failed notification email comes from project creation using defined project templates in an enterprise project type, even from a project that consist of template schedule , we added new task on that project and assign a team
member on that task that resulted with notification sent to the team member, but not with task that comes from templates.
can someone help us on this issue, or is there any CU on this?
I appreciate any comments and feedback, Thanks for your attention!
Regards,
Nugroho
EPM implementator

Kirteshtiw,
Yes we did create the template from project professional and as far as i know,
the only way to create template is just to save it, no option to publish the template.
When you create a new project from template for some of the task you remove the resources then assign resource to those tasks then save and publish the project.
<--there are no resources assigned from the template, when i assign resources (new assignment) this will not trigger notification
Or create a new task under summary task assign resource then save and publish the task you notification sent to the resource means it is working.
<--new task (not from template ) also trigger the notification

P6 R8.3 Problems with BI Publisher, Team Member

Hi
I am setting up a demo server with P6 R8.3 EPPM. The process I have followed so far is:
Install Windows Server 2008 R2 SP1 on the box (2 x Quad Core Xeon, 16GB RAM, 2 x 300GB drives)
Install SQL Server 2005 and copy across our current demo R8.2 EPPM database
Install JDK 1.6.0_41 64 bit
Upgrade the database to R8.3
Create a new Middleware Repository for BIP
Do a "simple install" of 64bit BIP from the "generic" distro to create an instance of WebLogic 10.3 and BIP 11.0.0.6.0 within it
Install P6 R8.3 and configure it to deploy into the existing WebLogic instance
Copy the P6 Reports into BIP and set up BIP as per the docs
I had to use the db configuration tool to create (?overwrite) the old P6 Configuration data in the database as when using the web P6 Administrator it was telling me that no database was configured for administration, and I have then gone in to adjust the URL for the database and the link to BI Publisher.
The supported configurations document also says that a patch needs to be applied to WebLogic 11g and I have tried applying it but it seems to be ignoring it - an earlier build attempt using a 32 bit version of WebLogic installed separately from BIP did take the patch, so maybe there is a later version of WebLogic bundled with BIP?... In any case, I am not seeing the error the patch was released to fix.
As of now, I have a working P6 environment with all data carried over from the 8.2 environment. There are 2 odd things happening though, and I can't see any reason for them:
First, any user trying to access Team Member Web Services gets an error message at login saying they are configured to use Progress Reporter to update progress. This happens regardless of the Module Access settings for that user, it just doesn't seem to work any more. Is there more I have to do here?
Second, I can't get the reports tab in EPPM to work, and always get the error message saying that the user is not configured in BI Publisher. Just to be clear what I have done:
I followed the procedure in the docs for setting up P6 reports in BIP and have checked it numerous times.
BIP is using the BIP Security model with a local superuser
The JDBC connection to the P6 database works, and I can login as any of the users in BIP that I set up to match the P6 users, and execute reports within BIP and see results returned
Those P6 users have got Enterprise Reporting module access
I have bounced both P6 and BIP several times within WebLogic, and WebLogic is showing all the various subsystems are running OK (as is Enterprise Manager)
I have compared the setup of this version of BI and P6 to those in our working R8.2 system, and the only 2 differences I can see are
BI is 11.0.0.5.0 for R8.2 and 11.0.0.6.0 for R8.3
When I assigned the data model to the reports in R8.3, the icon for the report disappeared and now just displays as a black box with an x in - but it only did this for some reports (eg the Activity ones)
One thing I am not clear on is the format of the URL for the BI web services - some docs say it should end in ?WSDL, others don't (for the combination of BIP 11g and SQl Server). I have tried both forms without seeing any change in behaviour (Typing either form into a browser results in a response so the web services system is definitely alive).. I have also tried changing the path to the reports from "/P6Reports" (which it actually is) to "/P6REPORTS" (which works in our R8.2 system, even though that's not what the folder is named - its also /P6Reports), but again that doesn't make any difference. Finally, I have tried logging into BIP directly using the credentials saved in the configuration and they work fine.
I am completely stumped - can anyone offer any further things to try out?

Alex
I have finally had an answer from Oracle about the BI Publisher issue, which is due to the fact that I installed the WebLogic bundled inside the Oracle Business Intelligence media set which is 10.3.5, while P6 R8.3 requires 10.3.6
So for the products to share an instance of WebLogic that both can use, you have to install WebLogic first from its own media set and without creating any domains. Then you patch it as specified in the Supported Configurations document, then install BI Publisher using the "Software Only" option, deploy that into a new domain, and finally install/deploy P6 into its own domain.
I now can see the reports in P6, but running them within P6 is producing an error. The Team Member issue is still partly there - assigning Team Member access to a user who didn't previously have it seems to work, but those who had it in 8.2 still can't login as the system still thinks they are set up for Progress Reporter. We have also encountered a problem where the whole top half of the user interface - the main tabs and the menu in the top RH corner - all is grayed out and becomes inactive at various points. I have found this listed as a bug related to Java 7 in the client browser which is fixed in R8.3 SP1 so I am now going to try to install that across all the various components of the product and see what happens...

Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasnt the person who set this up originally so I'm a bit

Hi I have adobe CC for teams, a team member is having problems opening indesign we are being asked for a serial number, ive checked on our admin account and he is one our our registered 'members'. I wasn't the person who set this up originally so I'm a bit lost, i cant seem to find any serial numbers on the my account section and it seems we have no registered products? can you help?

Hi There,
We have checked the details of your team, all seat are assigned properly.
Now there are few details that we would need in a Private Message so that I can assist you appropriately.
Name of the user:
Email of the user:
Meanwhile, try the below mentioned links.
Creative Cloud applications ask for serial number
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
[Note: Details that we need is critical, make sure you send them in via Private Message only.]
Thanks,
Atul Saini

Can you add a single app subscription to Existing Cloud for Teams for new team member?

Is it possible to add single app subscriptions to an existing CC Team Acct? I have a team member that needs an Adobe Acrobat IX Pro subscription and would like to manage it from my CC Teams management tools.

Indeed!
The trouble I have is that I CANNOT allow this user to have the full suite. I am implementing software inside of a cGMP manufacturing facility (nutritional supplements). Part of our "label artwork" change control is the fact that not only are critical files locked, but also no-one in the company can edit the files even if they copied them to desktop.
I can't allow a project manager, or executive, or admin assistant the same software capacity to edit critical files as the art dept, in the event that their changes might slip through to production.
Now granted, I could create literal policies to compensate for this situation, but does an admin person really need Premier Pro and AfterEffects? Nope, not really. I could see an argument in favor of the document production tools, but the web and video tools are complete overkill.
I had been hoping to implement a series of Acrobat Pro suites, to enable an easy form of document signing. I didn't want to implement any form of server based signature authentication, since our process is wholly internal and not subject to serious security concerns. I've been forced to shelve the project for now while I investigate more options, which means adobe missed out on some sales.
Hopefully, Creative Teams will be expanded to have more flexibility as Adobe matures their product offering.

MSA copying activity: flag 'main team member' not set automatically

Similar Messages

Maybe you are looking for