Restricting web areas using realms

Greetings,
I must be missing something. I would like to have a general website area to be used for general information that all can see. However, I would also like to create subdirectories that will have limited access.
At first glance I thought realms would do the trick. However, when I enforce credentials for one area of the website, the general area also also gets enforced.
I have the general "Webserver/Documents" folder. I would like to have three other subdirectories, "thomas1" which would only be accessible by user a, b, and c.
The "walter2" subdirectory can only be accessible by users ii, iii, iv, and xx.
Do I need to apply the same ownership credentials on these subdirectories that will mirror the realms credentials?
Thanks you for your time.
Regards,
Brian

Do I need to apply the same ownership credentials on these subdirectories that will mirror the realms credentials?
Do you mean file ownership? No. That's not relevant to Apache - all files must be readable by the www user.
Realms should be able to do what you want, but what's not clear from your post is how you tried to implement realms. Did you use Server Admin? or did you edit your site's config file directly?

Similar Messages

WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions

I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue. NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).
Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
This is the 2nd time it happened with 2 different models.
Please help ASAP.
Thank you,
Lance
(Mod note: Edited post. Some parts off topic.. Thanks!)

Also, you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed

We are planning to Silent print a PDF from a web page using Flex. We are targeting Windows and Mac with Arcobat reader installed. I have tried using the AIR appliaction and it worked, But our requirement is NO INSTALL to the user machine for the silent printing. It is just from web page and silent printing to the default printer to the desktop/Laptop. Can anyone share your thoughts and experience with us. It will be very helpful..
For AIR : I tried the thread Re: AIR and PDF showing/silent printing

Hey CodeMonkey & Ross,
Did you either of you ever find a solution? I'm stuck too, it seems I can get remote printing on all these PDFs to work but it just prints a blank page since I've been using Javascript in the browser, not Adobe's (they are Engineering drawings that I do not have permission to edit so I can't just insert code into them but I need to make work instructions). I've been scouring the internet for hours now, it seems that this thread is the only relevant/useful one at this point. No one else was trying to achieve this for similar reasons to mine.
Thanks guys,
Lox

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

How can I import all my gmail contacts into iPad? I use iPad mini and the solutions available on the web are not compatible.

Hello and thanks for the answer.
I meant by "not compatible" that all the solutions that I found on the web did not work, especially the "Microsoft exchange" one.
Fortunately I found on the comments of the first website you mentioned the right answer for me, which I copy below:
Tap Settings > Mail, Contacts, Calendars > Add Account > Other > Add CardDav Account.
Enter the following information in the fields:
Server: google.com
User Name: Enter your full Google email address
Password: Your Google account password
Select Next at the top of the screen to complete the setup.
After you have completed the setup, open the Contacts app on your device. Syncing should begin automatically.
Additional Information
Note: Make sure that SSL is enabled (under Advanced settings), and that the port is 443.
If you are using application based special password go to https://accounts.google.com/Se... and instead of your password put that special code and u r done.

When ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?

Step by step, how did you arrive at seeing this agreement?

Where Web Dynpro Java version of Adobe Forms are used in ESS MSS

Hi, SDN Expert.
I am working on research the use of Adobe Interactive Forms in the current processes of HCM ESS MSS.
We are on ECC5.0, EP7.0, and ESS MSS SP21. We are in the midst of upgrading to ECC6.0.
Do you know where Web Dynpro Java version of Adobe Forms are used in ESS MSS are used? OR are they all in Web DYnpro ABAP version in ECC6.0?
Thanks,
KC

Sergio,
FYI.
I am trying to see how the form I design/modify in TCode: SPF are working together to these piece of codes I found in NWDI WD4J pcui_gpisrsap.com --> VcISRShowForm DC --> ShowForm view:
public void wdDoInit()
    //@@begin wdDoInit()
          InteractiveForm form =
               (InteractiveForm) ((View) wdThis.wdGetAPI()).getElement("IsrForm");
          form.setDynamicPDF(true);
          form.bindPdfSource((IWDAttributeInfo) null);
    //@@end
public static void wdDoModifyView(IPrivateShowForm wdThis, IPrivateShowForm.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
    //@@begin wdDoModifyView
          logger.pathT("Entering: wdDoModifyView");
          // Dynamic context generation
          // Bind context
          if (wdContext.nodeNewGenericChildNodes().size() > 0) {
               if (wdContext.currentContextElement().getContextToBeReset())
                    wdContext.nodeData().getContext().reset();
               IWDNodeInfo genericNode = wdContext.nodeData().getNodeInfo();
               IWDNodeInfo origNode =
                    wdThis
                         .wdGetVcISRShowFormController()
                         .wdGetContext()
                         .nodeGenericNode()
                         .getNodeInfo();
               IWDNodeInfo childNode;
               IWDNodeInfo deepChildNode;
               for (int i = 0;
                    i < wdContext.nodeNewGenericChildNodes().size();
                    i++) {
                    childNode =
                         origNode.getChild(
                              wdContext
                                   .nodeNewGenericChildNodes()
                                   .getElementAt(i)
                                   .getAttributeValue("name")
                                   .toString());
                    deepChildNode = childNode.getChild("DATA");
                    genericNode.addMappedChild(
                         childNode.getName(),
                         null,
                         childNode.isSingleton(),
                         childNode.isMandatorySelection(),
                         childNode.isMultipleSelection(),
                         childNode.getPathDescription(),
                         false,
                         true);
                    genericNode.getChild(childNode.getName()).addMappedChild(
                         deepChildNode.getName(),
                         null,
                         deepChildNode.isSingleton(),
                         deepChildNode.isMandatorySelection(),
                         deepChildNode.isMultipleSelection(),
                         deepChildNode.getPathDescription(),
                         false,
                         true);
                    genericNode
                         .getChild(childNode.getName())
                         .getChild(deepChildNode.getName())
                         .addAttributesFromDataNode();
          // Avoid another context generation - all context have been generated
          wdContext.nodeNewGenericChildNodes().invalidate();
          InteractiveForm form = (InteractiveForm) view.getElement("IsrForm");
          //Set the template source of the form (if necessary)
          if (wdContext
               .currentIsrParamsElement()
               .getSetTemplateSourceNecessary()) {
               form.setTemplateSource(
                    wdContext.currentIsrParamsElement().getTemplateSource());
               wdContext.currentIsrParamsElement().setSetTemplateSourceNecessary(
                    false);
          logger.pathT("Exiting: wdDoModifyView");
    //@@end

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

All fonts in this package are available for web font use. の記述について

adobeフォントの購入を検討しております。
購入ページの All fonts in this package are available for web font use. の記述は、webサイト製作にしか使用できないという意味でしょうか？
商品パッケージのデザインに使用したいと考えているのですが、通常のフォントと同じくダウンロードしてillustratorでの編集が可能なのでしょうか？
ちなみにフォントは Bickham Script proです。 http://store2.adobe.com/type/browser/P/P_1736.html
よろしくお願いいたします。

Bickham Script Pro は Illustrator CS3 にバンドルされていましたね。
購入ページの All fonts in this package are available for web font use. の記述は、そのフォントを見た時にログインしている Typekitプランでは「このパッケージはWeb用途では無料で使用出来ます」という事ですね。デスクトップ用途では購入して下さい。という事だと思います。
Full Library | Typekit
＜＞マークがWeb用途、モニターマークがデスクトップで使用出来ます。

Is there any way to ban Winsock Packet Editor from workin on your browser other players are using this progarm to interfer with peopels game play using your web browser on forfox

ok i play yoville and people are using your web browser for the program Winsock Packet Editor Pro and everytime I try to enjoy yoville by zynga some fool uses your web browser to make winsock packet aditor to disconnect my player im so sick of this crap i work all day i exspect to come on yo and enjoy my game play not for some fool to use your web browser to make a program work and disconnect my player by gaining access to cdata people can also use wpe to get into others account with out any password or user name so is there any way to stop this program from working on your browser to stop these hackers from compromising accounts and ruining the fun of zynga games Ty for your kind Support and i hope u can help stop this program from working on your browser and from other browsers game play would be better off for all

If you are meaning [http://wpepro.net http://wpepro.net], that tool doesn't use Firefox in the slightest. It uses TCP/IP (part of Windows) to Monitor networks (it can also be used nefariously).
Please update your Firefox to Firefox 11, as the version you are running Is vulnerable to Many known security holes. After you do that, try to see if your problem is still going on.

Query Builder - Find WEBI reports that are using a table

I am trying to find list of WEBI reports using a specific table. This specific table is used in only 1 universe.
Though I could successfully find list of reports that use this universe, I am unable to find drill down further and find the subset of reports using this table/object.
SELECT si_name, SI_KIND, si_id, SI_PARENTID,SI_AUTHOR,SI_OWNER FROM CI_INFOOBJECTS, CI_APPOBJECTS
WHERE PARENTS("SI_NAME='WEBI-UNIVERSE'","SI_NAME ='MyUniverse'")
Is it possible to find the information I am looking for using query builder.
Also, for a given WEBI report I am trying to find the list of report names and the folder they reside in:
Select SI_NAME, SI_ID, SI_PATH, SI_KIND, SI_OWNER From CI_INFOOBJECTS, CI_APPOBJECTS WHERE
PARENTS("SI_NAME='Folder Hierarchy'",
"PARENTS('SI_NAME=''WEBI-UNIVERSE'' ', 'SI_NAME=''MyUniverse'' ')" )
The above query just gives me the folder names. I am looking to find the report names as well the the folder (and preferably the path) in a single query. Is that possible.

Sri,
With respect to your 1st requirement:
In BusinessObjects 6.5 it was possible. However, post BOXIR2 this information could not be retrieved from CMS via query builder. I agree with Jorge Sosua's comment above.
With respect to your 2nd requirement:
The field 'SI_PATH' will retrieve Filestore path(physical path). If you were referring logical path(Public folder path or psuedo-reference path) will you please refer my respone to Kelly Stone at BusinessObjects Query builder queries - Part II , If this may assist you.
Regards,
Sandeep

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device. I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail. Thanks for your help.

Not a feature of iOS. Check the AppStore to see if there are other
mail apps that allow passcode protection.
Or use Safari to log onto your email via a web-based interface and
enter your credentials each time. A bit slower, but the kids will
not know the details to login.

Calling a web-service using JAX-WS client on the browser

Hi,
I created a basic web-service using netbeans/glassfish, which can be successfully called from a JavaFX application running stand-alone.
But when I try to run the same JavaFX application on a browser, the web-service call does not work, and it is hard to get any information on where it is failing.
I can see the error is a Throwable (not an Exception), but the message is null.
What are the restrictions on being able to call a webservice using the JAX-WS libraries? Are there security issues? I am not using the javafx HTTP libraries.
Also, if Java1.6u10 is available on the machine running the browser, do I still need to package all the JAX-WS libraries for the client?
Any help is appreciated, even if it is just about how to track down the problem.

Thank you very much for responding.
There was no error due to WebService. Actually, I was using xmlbeans and I did not put those xmlbeans jar files into appropriate place. That is what caused the problem. I have solved it now and it is working fine.
I put those xmlbeans jar files into my war file. It is working. Earlier, I had put them in tomcat 5.5's shared/lib directory. It was not working.
Thank you once again for replying.
Sasi.

Web dynpro using SE80( for FORM16 under ESS )

hi to all.
Please can you guide me who to create web tools using SE80.i dont have any knowledge in webdynpro.
Here i am working as ABAP programmer. We also want to use ESS service.
here is my requirement.
there is one Tcode PC00_M40_F16 .this is form 16 .when ever he want to see his form16 we need to show . We able to show it ,but the problem is one can see other's form16.
we are planing to create some custom Tcode or Function module which will use this TCODE internally.
We have to restrict one person such that ,he can able to see his own form16.
Thanks in advance.
have a nice day......
chandra.........

Hi Shiva,
I understood , you want to create a Webdynpro Applicaiton and run it.
this will help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cb243c45-0801-0010-eb9c-88669007f130
Regards
Abhimanyu

What info. to store in the web.xml tag realm-name for a LDAP authentication ?

Hello everybody,
I try to authentify users of my web-app with a full-LDAP directory (O.I.D : Oracle
Internet Directory),
using Weblogic 5.1.
So i have configured :
1) "weblogic.properties"
2) "ldaprealm.properties"
and then i have to configure the xml files for my web-app : "web.xml" and "weblogic.xml".
What kind of information must i put in the tag <realm-name>, under <login-config>
in "web.xml" file ?
Is it the same name which is mentionned in the weblogic.security.realmClass property
of the "weblogic.propertis" file ?
Is it another name ? Which one ?...
Could you send me a pair of a web.xml/weblogic.xml associated with a web-app,
in a LDAP authentication envirnoment ?
It would be a great help for me.
Thanks in advance.

Hi Sylvain,
Web-Application security works in exactly the same way whether you are using the LDAPRealm,
or just the fileRealm
To the web-application, it makes no difference whether a principal is in either LDAPRealm or
fileRealm
Here's working pair:
web.xml
<web-app>
<security-constraint>
<web-resource-collection>
<web-resource-name>myName</web-resource-name>
<url-pattern>/myDirectory/myFile.html</url-pattern>
<http-method>GET</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>
myRole
</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
</login-config>
<security-role>
<role-name>
myRole
</role-name>
</security-role>
</web-app>
weblogic.xml
<weblogic-web-app>
<description>WebLogic Descriptor</description>
<security-role-assignment>
<role-name>myRole</role-name>
<principal-name>myWLS_principal</principal-name>
</security-role-assignment>
</weblogic-web-app>
Here myWLS_principal should be a user or group that exists in either the WebLogic fileRealm
or the WebLogic LDAP realm (or other alternate realm -- it doesn't make a difference whether
this is LDAP, or NTRealm, or UnixRealm, or RDBMSRealm, or Custom Realm...)
Cheers
Joe Jerry
"Sylvain R." wrote:
Hello everybody,
I try to authentify users of my web-app with a full-LDAP directory (O.I.D : Oracle
Internet Directory),
using Weblogic 5.1.
So i have configured :
1) "weblogic.properties"
2) "ldaprealm.properties"
and then i have to configure the xml files for my web-app : "web.xml" and "weblogic.xml".
What kind of information must i put in the tag <realm-name>, under <login-config>
in "web.xml" file ?
Is it the same name which is mentionned in the weblogic.security.realmClass property
of the "weblogic.propertis" file ?
Is it another name ? Which one ?...
Could you send me a pair of a web.xml/weblogic.xml associated with a web-app,
in a LDAP authentication envirnoment ?
It would be a great help for me.
Thanks in advance.

*Can ARD restrict students from using particular programs?

I am a new high school digital arts teacher running ARD 3 in my classroom and have trouble with students being distracted with the internet. Is there any way to restrict students from using Explorer and Safari temporarily (and still keep the network connection) so they can focus on their work and not on their social lives?
Is it possible? If not, any suggestions about what I should do or use?
Thanks! ___________________UPDATE:
____>
Thankfully, I received the following sugesstion from a helpful user.
Can someone explain this in layman's terms?
I've never used UNIX but am willing to try.
"If you don't mind messing with the firewall settings of your clients, you could try something like this: send (as root) the unix command
ipfw add 2005 deny tcp from any to any 80 out xmit en0
This should stop any request being sent via port 80, the most common port for web servers. You might want to check that there is no rule already at 2005 by issuing a 'ipfw all' to get the list of rules in force. If there is, use a different number.
To reset the firewall, either reboot the clients (which loads the default firewall rules, without your changes) or send (as root)
ipfw delete 2005
(or whatever number you used. You could save these two commands as Saved Tasks to have them ready whenever you need them."
Clarity would be much appreciated. Thanks All!

Hello Elle,
I hear you. I'm a Graphic Communications teacher that had the very same problem. I solved it by getting rid of Explorer and turning on the parental controls in Safari within the 10.4 student permissions. Then I entered web sites into Safari that pertain to the subject of my class work. After about a week of student complaining the students accepted the fact their is no personal web surfing and now focus their attention on their work. And once again students that come into my classroom before and after school work on their projects instead of myspace.com, etc. Keep in mind the students still have access to the internet, but only to the web sites you setup.
Another way of doing it if you want to give student free time to surf the web is to setup two sets of permissions, if you are familar with this. One set gives students access to the browsers and the other does not. The permission file for controlling student access is located in /Library/Managed Preferences/in my case a folder named student/com.apple.applicationaccess.plist. Create two folders on your computer and put a copy of each preference file into them. Using Remote Desktop, logout from each of the student computers and then using the Copy Items command and Place items in: copy the permission file of your choice to: /Library/Managed Preferences/in my case a folder named student. When the students login they will be controlled by the permission file you just sent.
I'm also very good at altering system files that prevent students from tampering with the way I setup their computers. Let me know if I can assist you with other problems, or the above problem if you should have further questions.
From a fellow teacher,
Dennis
Mac OS X (10.4.6)

Restricting web areas using realms

Similar Messages

Maybe you are looking for