Result of FOX in a message

Hi all,
I want to do validation using a fox formula.
do you know where can I define the message type?
Ex:
If A<B
MESSAGE 'A<B not possible'
Best regards;
Ricardo

Hi,
You can create messages in T-Code in SE91. Then you can include this message in your FOX.
rgds,
From SAP Online Help :
Issuing Messages
Messages can be issued with MESSAGE Tnnn(class) or with MESSAGE Tnnn(class) WITH operand1 ... operand4. T is the type of message. 'E' = error, 'I' = information. nnn is a three-figure number. class is the message class. Optionally, a maximum of 4 operands can be entered additionally. Operands can either be variables or strings enclosed in quotation marks. If you trigger a type 'E' error, then the planning function results are not transferred into the internal transaction data buffer.
The messages are gathered and displayed after executing the function. If you edit plan data, the messages are only displayed, if at least one type 'E' error is triggered. Otherwise the display does not occur.
It is best if you create your own message class for error messages, and do not use any of the messages that are delivered by SAP. Note that you must transport your own message class from the test system into the production system.

Similar Messages

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

Links inside Microsoft Office Outlook 2007 result in a "General Failure" message instead of loading in Firefox 7

When I click a link inside Microsoft Office Outlook 2007, it results in a "General Failure" message instead of loading the link inside Firefox 7 (previous versions of Firefox loaded OK, this issue has only arrived with the recent upgrade).

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

Firefox 5 upgrade results in the following error message presented under details. My system is configure for any type of LAN settings since I only have dail-up connection.

Installation of FireFox 5 after deleting FireFox 3.6v results in the following error message which I cannot resolve or fix. My system is configured with IE 8v and dial-up only.
"FIREFOX BROWSER 4.0v and 5.0v
The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
* Check the proxy settings to make sure that they are correct.
* Contact your network administrator to make sure the proxy server is working."

Please try to go to tools, options, advanced, networking, settings, set "no proxy", re-try. More details here: [[options window - advanced panel]].

Viewing multiple results in Spotlight search in messages

When I perform a spotlight search for certain words in Messages it returns multiple results with multiple people. How do I view each conversation? I have 18 results with one person but can only view one conversation out of the 18 when I click? Thanks!

Hi,
I am confused as to where you are starting from.
Spotlight is the Search App that can be accessed top right in the Menu Bar with the spyglass type icon.
It does not matter which app is "front" it will Search all the allowed places (mostly the Mac User account info and on other Mounted Drives).
There is a Search option in the Main Window of the Messages App
This will change the list to show those Chats with the word in them.
It will highlight one when you View that Chat.
Using the Edit Menu > Find > Next (or Use the Keystrokes CMD+ F) will cycle the found word through as many chats as have been found.
Same List of Chats without the Search Criteria listed
(No Highlighted Text).
8:25 pm Monday; September 22, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Search Text incorrectly shows no results. Foxit Reader shows it correctly.

Doing a Text Search in Adobe Reader 11.0.09 incorrectly gives no results found. Opening the Same PDF in Foxit Reader correctly returns the results.

It seems to be a glitch with the App Store because I havent been able to search for quite a while.

Sorting Interactive Report results in no data found message

Hi,
I've got an interactive report which returns results based on the :REQUEST bind variable - I've got a navigation list at the side where all the items link to the current page with different Request values. The IR works fine until I try to sort any of the columns by clicking the header and choosing ascending / descending, at which point it returns no data found.
It starts working again if I change the last line to OR :REQUEST IS NOT NULL but this breaks the functionality of the report, I want to return only the selected statuses, or all if no request variable is present. I'm guessing that sorting sets :REQUEST to something temporarily and breaks it. My query is below, any ideas?
SELECT   id,
         job_number,
         appt_start,
         domain,
         pwa,
         status,
         tstamp_created
FROM   fail_jobs
WHERE (status = 'NEW' AND userid_created != 'SYSTEM' AND :REQUEST = 'ARD')
     OR (status = 'ATR' AND :REQUEST = 'ATR')
     OR (status IN ('ERR','REV') AND :REQUEST = 'REV')
     OR (status = 'COM' AND :REQUEST = 'COM')
     OR (status IN ('PCD','PCA') AND :REQUEST = 'PCD')
     OR :REQUEST IS NULLThanks

There are known issues with Interactive Reports referencing :REQUEST value, probably due to some inner logic that also handles it simultaneously - potentially causing malfunction or deadlocks.
One workaround I've learned is to create a computation to assign :REQUEST to a temporary item (a PXX_REQUEST, for instance) and reference it in the query, instead of :REQUEST. This has worked fine for me in my experience.
Let me know if that helps - pls sign the thread as 'Useful' or 'Correct' if so, hence more people can benefit.
tks,
Kleber

When opening certain websites or clicking links from google results, I get this popup message "Error: 'setTimeout' called on an object that does not implement i

The message says: "Error: 'setTimeout' called on an object that does not implement interface Windows" Multiple message windows for this get open. And there is an OK button under it. I have to click on OK button on all the windows to be able to continue with working on the browser again.

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Message class as result data object

hello brf+ users,
is it possible to use as Result data object in a Case expression a message from a custom message class?
thanks
danilo

thanks Carsten,
my requirement can be simplified in
IF FISCAL CODE
equals to " " then "001" ENTRY MISSING is returned
otherwise "000" check ok is returned.
where 000,001 are domain values of an element (MESSAGE RESULT).
can i use the message class as result? is there a way to anchor the result to the message class?
thanks
danilo

Phantom messages appear in search results

Hello. When I search for a message in Mail, the search results often include three instances of the same message. One is the correct message. The other two, however, are phantoms. There is no mailbox listed for these phantoms, and if I click on a phantom in the search results window, nothing in the message pane, just a "show in mailbox" link. If I click on "show in mailbox" link for these phantoms, Mail does nothing.
Has anyone else experienced anything like this?
I'm using IMAP to a server at my university, so perhaps could this be a problem with the mail server?
Any advice is appreciated.

How long has this been going on? Are these "phantoms" messages that you deleted before and still showing up, or are they all the same message, with the same date and time?
Have you tried rebuilding your Mail index? It could be corrupted. To do that:
1. Quit Mail if it's running.
2. Go to Home/Library/Mail and remove (do not delete) the Envelope Index file(s) to your Desktop.
3. Restart Mail and allow it to import your existing messages. When that's finished, try searching for those same messages again and see if the phantoms still show up; you can also delete the Envelope Index file on your Desktop.
Post back with results.

Adding custom message on the login page

I have done the following to try and get a custom message to display on the oracle login page:
1:
In the System Administrator Responsibility, went into the System Profile Options and searched for "Local Login Mask" The default value was 32, I set it to 96. This was done because 64 is the number to display a "Corporate Policy Message" on the login page (32+64 = 96).
2:
Switched over to the Application Developer responsibility, and went to Application->Messages. Here I did a search for "FND_SSO_SARBANES_OXLEY_TEXT". A result came back with current message text: "Corporate Policy Message". I changed this to a test message and hit save.
3
Still in Application Developer responsibility, I went to Other->Requests->Run and chose "Generate Messages", for parameters I chose:
Language: US
Application: Application Object Library
Mode: DB_TO_RUNTIME
while leaving the others blank. I submitted this request and it completed normal.
4
I logged out of applications, closed my browser and cleared my cache. I went to login into the apps and at the login page... it does display "Corporate Policy Message" but it never updated it to my custom one.
Question: Do I need to restart the HTTP server or something to see the updated results? I am confused why it will display "Corporate Policy Message" but the value for FND_SSO_SARBANES_OXLEY_TEXT is clearly changed. Even when you go back into it and look.
The Generate Messages conc prog is a spawned process so I cant find out what its doing.
Any help would be loved!
OH PS
I know I started a previous thread on a similar topic, but the method has changed completely and I think it merits its own thread. My apologies if it shouldn't have been.

Hi;
What is your EBS and OS?Please check below thread
password-Lock User when enter password in wrong 3 times
Re: Lock User when enter password in wrong 3 times
Regard
Helios

Payroll results could not be imported/Error in Finance Posting of Payroll

Hi friends,
Please help me.
I have created three wage types
2001-Basic Pay
2002-HRA
2003-Conveyance
When I generated remuneration statement all these three wage types where displayed along with EE EPF contribution and VPF contribution which I have assigned earlier in infotype.
After that for posting to FI, I created three symbolic accounts
(Basic, HRA and Conveyance together as 0001 symbolic account I(accounted posting to expense report)
Employees contribution to PF ( i.e.EE EPF contribution and EE VPF contribution) to (PFEE) symbolic account II (accounted posting to balance sheet)
Employers contribution to PF ( i.e Employer PF contribution and Employer pension contribution) to (PFER) symbolic account III (accounted posting to expense report)
After this I have grouped employees as 3 for salaried employees, after this I have assigned the same to number 3 to PPMOD under three (I am not sure this is correct, please advise)
Then with the help of an FI consultant, I assigned PFEE to balance sheet and 0001 and PFER to expense account.
Now when I activated 'Execute Run' for finance posting of payroll of a personal number an error is shown 'Errors Occured! Check Error Log' payroll results could not be imported.
I doubt I missed some steps. Please help

Dear Naveen and Stephen
This is the message which I got
Payroll results could not be imported
Message no. 3G112
Diagnosis
The payroll results for this employee could not be imported from the database.
Procedure
Check the consistency of the payroll results for this employee.
Please help
Regards
Santhosh.S

Cannot delete messages from inbox, cannot move messages out of inbox, message do not copy to "sent" or "draft"

The following problems occur:
- cannot delete messages,
- cannot move messages out of inbox,
- messages do not copy "sent"
- messages cannot be saved to "draft"
This applies to imap and to gmail accounts.
The following has not helped:
- compact trash and other folder
- deinstall and reinstall TB 31.4.
- archive profile with mozbackup and replace profile from archive after reinstall of TB.
- deinstall and reinstall TB 31.3 downgraded
- delete all folders and files with "trash*" in the file name (all IMAP)
- delete all files of 1 mail account completely in the TB profile and resync from server (IMAP)
This might coincide with these system changes:
- upgrade to TB 31.4.
- some of these email accounts were installed on ios8 iphone.
Not sure if the problems had already started before these 2 occurrences.
Any help is appreciated to solve this.
Thanks!
fashi

What type of mail account is this (POP, IMAP, .Mac)? If POP, what are your Preferences > Accounts > Advanced > Remove copy from server settings?
You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
Does this account allow web access? If not, you may find the Account Info window useful to solve this problem — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].

This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!

Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected]

InfoCube Data Modeling "Or" combination Result Set

Hi All,
I am new to BW so please let me know if this is something that can be done without too much complexity.
How would one go about tackling an issue like this.
Below is the sales ODS data.
Sales ODS Data
Customer -
Sales $ - Rebate Indicator-----Refund Indicator
Apple -
1000--True--
False
Apple -
500----
False -
True
Apple -
2000--True--
True
How would one design an infocube such that when a user selects the following BEX inputs, the result should bring back all the rows. I would like the input to be an "OR" combination instead of an "AND" combination. Thanks.
QUERY INPUTS #1 :
Customer Site = Apple
Rebate Indicator = True
Refund Indicator = True
QUERY RESULT :
Customer -
Sales $
Apple -
1000 + 500 +2000 = 3500
Message was edited by:
Nigel K

Hi nigel,
if i understood your requirement
you would like to see your result as
CUSTOMER SALES
appel>>>>>500
appel>>>>>1000
appel>>>>>2000
but try to have the other two fields Rebate and Refund in the rows of the Query then you will get all the three line items.
becoz cube will aggregate when the key is common.
Or else if your requirement is to display the result when one of the Column is true either Rebate or Refund.
then you have to add one more field to your Infocube and fill that in the update rules saying
If Rebate eq true or Refund eq True.
Result = True.
Else
Result = False.
Then while displaying the query result you can filter on this Field then you will get the correct result.
thanks and regards
Neel
Message was edited by:
Neel Kamal

Result of FOX in a message

Similar Messages

Maybe you are looking for