Resultant row needs to be changed

Hello Gurus,
I have a requirement where i need to change the reusltant row.
for eg..my report layout is like that
Material      order       days
23131          9091      11
12312          2313       0
REsult                                          0
23131          9091      11
12312          2313       4
REsult                         12
These days are being calculated from other two columns so now i want to dispaly the result like this if the no of days on second row is zero then result should be zero.
I hope my requirement is clear to you all.
Please help me out with this issue.
Thanks in advance.
Regards,
AL

I resolved it by my own using some if conditions.

Similar Messages

Result row does not hide value

Hi all,
I have some calculated key figures that are using formula variables to get dates to do calculations on.
Since summing up date values does not lead to anything meaningful, I selected the 'Hide' value in the 'Calculate results as...' section.
However, the results row is still showing an 'X' in this column when I run the query.
I have one calculated key figure for a date using this same method (formula variable from an infoobject) and the result row is hidden correctly.
Does anyone have any idea on why the result row would still display even though it supposed to be hidden?
Thanks in advance.

result rows needs need to be suppressed for characteristic properties.
in query designer , click on characteristics in your reports ( i.e rows ) goto display property supress the result rows..

How to change default for Suppress Results Rows

Hi,
Does any one know a way to change the default value for the "Suppress Results Rows" from "Never" to "Always" under characteristic properties in a BEX query?
Every time we build a new query we have to go to each characteristic and change most of them to "Always". Want this to be a system wide change that would affect all new queries or existing queries that are being modified by adding new characteristics.
Thanks,
Mike

Hi Mike,
This property is controlled by domain RRXNOSUMS. You can change the default value to point from "Blank" to "U", I suppose. Haven't tried this though and I am not sure if it is okay to play around with the SAP settings. But if it works for you, do post back.
Hope this helps...

Charts (Line chart) in apex 2.0 /3.0 limit of resulting rows in char area

Hello @apex experts,
does any body knows if there is a max number of resulting rows by using a line chart. It seems that until 150 resulting rows all is o.k. but when I try to get a line - chart area for a whole year (365 days) no chart is displayed. I spread out the chart area to 2056 x 800 px but no restult is displayed by using the > 300 resulting set.
Regards and thank you for help

I changed this and put usage of UTL_FILE into a dynamic PL/SQL. The package will
compile and work unless you want to create debug information. If yes, then it will raise an
error message. So, you don't need UTL_FILE execution priviledge from your DBA.
I opened the package and you may modify it the way that you don't need any public
synonyms and no UTL_FILE to run it.
There are so many questions in this forum related to "What is my DBA going to say?" or
"How is he going to react?". Even for some minor issues. I have myself also seen some
of similar situations and the only thing I can sey is:
You got to use that powerfull tool Oracle Database instead of hiding it away from your
users and developers. Learn how to control it instead of prohibiting access to it! Otherwise,
it's just a waste of money.
Denes Kubicek

Query with a condition - Overall results row displays incorrect value

Hi All,
I have a bw query with top 40 conditions. However, The Overall Result Row Figures Do Not Equal The Sum of the Column Rows.
Although the top condition is activated, the overall result still displays the overall result of the whole report.
I have 3 columns in the report
Selected Period
Prior Period and
Variance
The formula for variance is (Selected Period/Prior Period)-1.
Does anyone have an idea to fix this?
Thank you so much in advance.
Have a great day!

Hi Gaurav,
Thank you so much for your reply, however this does not solve fully the issue.
Changing the properties to "Summation" will indeed provide me with the correct sum for the "selected period" and "Prior Period." However what I need in the Overall Result Row for the "Variance" column is not the total but instead the value when the total of Selected Period is divided by Prior Period then minus 1.
Overall Variance = (Overall Selected Period/Overall Prior Period)-1
Do you know a way to make this possible.
Thank you so much.

Getting descrepency in the result row of the Query

Hi All,
I am executing a query which is having 4 Keyfigures and 2 formulas.
I am getting wrong result in the query for formulas.
Below is the query structure
           f1        f2         f2%f1       f3       f4            f4%f3
date
1
2
         792    408        51.78        9647    8403       88.57
All the keyfigures - result is set as total
Formula                - result -nothing is defined(under calculation tab)
The result I am expecting for column 3 is 408/792 = 51.51
The result I am expecting for column 6 is 8403/9647=87.10
To get the expecte result what changes i need to do to the formula.
Thanks
Jagadeesh

Hi Anand,
Thanks for your reply.
If i change it to summation, it will give me sum in the result row.
I am not looking for summation, i want percentage for (overall result F2/overall result F1).
Thanks
Jagadeesh

Decimal places on the result row is incorrect

Dear Expert,
I met a problem that decimal places on the result row is incorrect.Anyone can help me?
On key figure balance,we do the currencies translation,also we set the key figure should have two decimal places.
We set a fomular to calculate the total result of Account A,B,C.
(Total result = account Aaccount Baccount C).
If we manually sum up the balance of account A,B,C displayed on analyzer,which are rounded to 2 decimal places,the result should be 601.25(100.61200.38300.26),but the actual total result executed by query is 601.24.
In fact we need the result 601.25 instead of 201.24.
I take the example as following:
Account Balance
Account A 100.61
Account B 200.38
Account C 300.26
Total result 601.24
Thank you in advance.
Best Regards,
Maggie
Edited by: Maggie Ma on Sep 25, 2008 9:17 AM

your "problem" is, that BEx is not totalling the "displayed" values but the real values
try a summation on the following in Excel:
100,605
200,375
300,26
then format the cells to show 2 decimal places only
do you see the result changing?

Result row at the end of the 2layouts

Hi All
We have 2 layouts in Web Interface builder. we have to calculate the values of 2 layouts and result will come into bottom line.
Ex: in layout 1 the value is 3000
in layout 2 the value is -3000
under these 2 layouts i need to get a result row as 0
Is it possible or not please explain. Please send any documents regarding the fancy changes and modifications of Web Interface Layouts.
I appreciate it.
Regards

Hi Sunil & all
Will you tell me the process step by step please as i am new to this scenario. in Layout3 which Planning level, package, layout i must select to get this result row. As i am not good with ABAP and any other programming language. But somebody help me to get the coding i will do. I appreciate your help.
Regards,

Formula in Query does not display Results Rows

All -
I know that people have posted this same thread before but I've been unable to find an answer or the questions have not been resolved.
I have created a simple query and the key figure columns are all formulae. The calculations are all the same format: KF1/KF2
Where
KF1 is an Amount kf with Local Currency as the unit (the dataset only contains GBP)
And
KF2 is a counter (the standard 1ROWCOUNT 'number of records' key figure).
The calculations work fine in the rows but I cannot get any results in any Results rows or Overall Result. Something is populated when I do not define anything in "Calculate Results As..." for the formulae, but this is not a summation, and when I select Summation or Total, the Results rows are blank.
I have tried altering settings for the key figures in the admin workbench, I've tried recreating them as global Calculated Key Figures, and I've tried playing around with the settings on the Calculation tab, but nothing works.
Please does someone have an answer to this??
Thanks
Mischa

Hi,
As follows -
     Cost (£)     # Records     Formula
Ref1     500     2     250
Ref2     300     1     300
Ref3     900     3     300
RESULT     1700     6
I have the Cost (£) key figure and the # Records Key figure. These are both hidden.
The formula behind the Formula is simply Cost(£)/#Records.
The characteristic used is not based on the most granular level hence the need for the calculation.
Although the formula is working correctly on a row by row basis, the results rows are blank.
As mentioned above, I have tried changing these to Calculated Key Figures, this has not worked.
Thanks
Mischa

Key Figure Summation in Result Row with Cumulation Ticked

Hi,
I have a Bex question regarding the summation rows.
I need a Year To Date amount and a Period To Date amount in the report. However, there is no Year To Date key figure available in the cube. So in order to calculate YTD, I'm using the PTD key figure and have Cumulated box ticked mark in Bex.
All looks fine across columns per Vendor. But the results row for the Cumulative Balance is always equal to the results row for Period Balances. I believe this is because the same key figure is used, and it is only reading the amounts in the cube - not the ones calculated on the fly.
Does anyone know how to correct the results row for a cumulated key figure?
Regards,
Rhonnie

You have to create two restricted KF; one is PTD restricted to period; the second is PTD restricted in a period range from 01.yyyy to current period.
Hope it helps.
Regards

How to display Average, not Sum, in the "Overall Result" row of a report?

Every report I look at or execute that has an Overall Result row always shows a total(sum) of all the cells in the column. I recently came across one that shows the average of all the cells in the column and after looking at the query in BEx Query Designer 7.0 and BEx Analyzer 7.0 I cannot seem to find out where to set this. All of the Key Figures are listed as "Nothing Defined" in the Calculations tab which is exactly what they should be, but where can I set that yellow-highlighted Overall Result row to calculate an average, not a sum?
Example can be found in this picture:
http://img87.imageshack.us/img87/6757/pic1yp.jpg
Thanks for the help!

My issue was that I was setting my KF's to 'Calculate Result As: Average' within the Query View that I was editing but the change was not showing on my screen when I have that View opened within the Analyzer. Infact, it still is showing totals. But when I execute my Web Template that references this Query View, the graph does display the result row using Averages. Seems to just be a visibility bug, but it is now working.
Thanks for the reminder about that property KP,
Scott

Query designer - supress result rows

Dear Friends,
I do have created a query using query designer. I dont want result rows in my reports both in web template and analyzer. Could anyone help me on defining the same globally?
Regards
Oops

Hi,
You need to select characteristics against which results are displayed for key figures.
In all charcteristcics properites you may find that.
I hope it will help.
Thanks,
S

How to hide the all rows except the result row in a report?

Hi Experts,
We have a report in which the user is interested to see only the result rows and I need to HIDE the characteristics in the rows. I was successfull in doing the same for Key figures in columns using "Calculate single value as suppress result". But I am not finding a way out to hide the characteristics in the rows.
If I move the characteristics in rows to Free characteristics, the result row is not getting dispalyed. Also, the characteristics are used dynamically by the formulae in columns and hence i cant remove these characteristics from the query. . The user wants the query to contain only one characteristic in the row and the result row for the key figures in columns. The report currently displays Invoice level data for each customer and this needs to be eliminated and it should display the summarised data for every customer. Please suggest how this can be accomplished
Regards,
Kavitha

Moving the char to free char will show the equivalent of result.
Your issue likely is that this breaks the calculations since you do want the calculations done at detail level.
To achieve this, move your char to free char (say it is 0CUSTOMER).
For the CKF/Formula, go to aggregation tab, set the exception aggregation as Total (or whatever it was in standard behavior) and specify reference characteristic (in this case 0CUSTOMER), also check the 'Before aggregation' if you have that checkbox there.
This will ensure the calculation is done at detail level even though the char is not included in the rows.
If you have multiple chars to be moved to free char but included in detailed calculation, you will need to build cascading CKFs (CKF1 with ref char1, CKF2 eq to CKF1 with exception aggr on ref char2...and so on).
Added:
I understand you do want 0CUSTOMER in there, but something else (let us say 0DOCNO) removed. Use 0DOCNO in place of 0CUSTOMER in the case described above.
Edited by: Ajay Das on Aug 5, 2009 8:57 AM

Wrong value in Result Row in a query which includes 1:N relationship SO/Inv

Dear all,
I have an InfoSet which includes sales order DSO, PO DSO and Invoice DSO. The purpose is to design a report to show 3rd party order flow.
Now I met an issue if one sales item contains multiple billing doc. Below is an example:
Sales doc: S001   order Qty is 600, there are two invoices for this order B001 invoice 200 and B002 invoice 400. Now in report we see below:
Sales Doc. --   Invoice no.   --- Order Qty --   Invoice Qty
S001 ---B001         -
       600        -
         200
S002 ---B002         ---        600         -
        400
Result Row     -
                                 1200      ---            600
We can see in Result Row totsl order qty is 1200 which is wrong.
I am wondering if anybody have such experience and the method soving this problem ? Many thanks in advance !

Hi,
Normal aggregation calculates the result row as a summation. However, you can change this default behaviour by using Exception aggregation at "Order Qty" key figure.
You can find a detailed article with examples about Exception aggregation at:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0b8ed5b-1025-2d10-b193-839cfdf7362a
I hope this helps you.
Regards,
Maximiliano

WAD result row in the name of the WAD report

Hi,
My requirement is we need to show summary of the result rows in front of WAD report output. Is it possible by any means please let me know.
amit

our requirement is top management should get summary report like this e.g
WAD output as of now we have.
> costing report (Heading of the report) (compress)
> Query result (at the top or at the bottom)
I need Query result should appear at top level before clicking on heading costing report.
Please let me know if anything required above.
amit

Resultant row needs to be changed

Similar Messages

Maybe you are looking for