Retaining value for tableView element

Hi,
I have a tableView element on a BSP page. visibleRowCount property for it is set to 10.
Source internal table for this tableView is lt_search declared on the page attributes tab.
I am able to successully show data in this tableView element.
But when the next page button is clicked on this tableView element to view the next 10 rows,
It seems that the source internal table for this tableView element (lt_search in this case) gets cleared,
and I have to re-populate it again in the event OnInputProcessing.
Which means I have to execute the select statement everytime next or preivous page button on the tableView element is clicked.
Is this the way it should be, or there is a way to retain the value of internal table and hence the tableView element and avoid executing selecte every time..
Thanks in advace,
CD

hello,
Is it a stateless OR statefull application?
If it is stateless then not possible....
Thanks

Similar Messages

BEA-382513: OSB Replace action failed: bad value for type element anyType

Hello, in OSB I get this strange error message on my XQUERY TRANSFORMATION.
*<faultstring>BEA-382513: OSB Replace action failed updating variable "response":*
com.bea.wli.common.xquery.XQueryException:
*Error parsing XML: {err}XP0006: "*
*element {http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5}Cs2DebitorOpVieCollection*
*{ {http://www.w3.org/2004/07/xpath-datatypes}untypedAny }":*
bad value for type element
*{http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5}cs2RechungungenResponse*
*{ {http://www.w3.org/2001/XMLSchema}anyType }*
*</faultstring>*
I'm a pl/sql developer and I have no idea what this error message is telling me.
In this forum I'v read someting about a wrong namespace declaration. I can't see any wrong value on my xml (ok, I'm not the specialist here...)
Maybe someone of you xquey cracks might have a look at my code?
This is what I have:
_1.) a XQuery variable called cs2RechnungenResponse with this content:_
<cs2:Cs2DebitorOpVieCollection
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:cs2="http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5">
     <cs2:Cs2DebitorOpVie>
          <cs2:f40Konto>333</cs2:f40Konto>
          <cs2:AMT_BEZEICHNUNG>Amt für Gesundheit</cs2:AMT_BEZEICHNUNG>
          <cs2:f40Belnr>555</cs2:f40Belnr>
          <cs2:f40Sohab>S</cs2:f40Sohab>
          <cs2:f40Dmbet>100</cs2:f40Dmbet>
          <cs2:f40Fadat>2011-05-05T00:00:00.000+02:00</cs2:f40Fadat>
          <cs2:f40Valut>2011-05-05T00:00:00.000+02:00</cs2:f40Valut>
          <cs2:f40Mahns/>
          <cs2:f40F40Sj>0</cs2:f40F40Sj>
     </cs2:Cs2DebitorOpVie>
</cs2:Cs2DebitorOpVieCollection>
_2. a xquery with this code:_
(:: pragma bea:global-element-parameter parameter="$cs2RechnungenResponse" element="ns2:cs2RechnungenResponse" location="../adapters/cs2_adapters/xsd/CS2AdapterSelectOffenePosten_v0_5_table.xsd" ::)
(:: pragma bea:global-element-return element="ns0:getDebitorRechnungResponse" location="../../interfaces/RechnungServiceTypes_v0_6.xsd" ::)
declare namespace ns3 = "http://www.llv.li/common/types/v1";
declare namespace ns2 = "http://xmlns.oracle.com/pcbpel/adapter/db/top/CS2AdapterSelectOffenePosten_v0_5";
declare namespace ns1 = "http://www.llv.li/fin/types/v1";
declare namespace ns0 = "http://www.llv.li/fin/services/rechnungService/v1";
declare namespace xf = "http://tempuri.org/fin_sb/RechnungsService/transformations/CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v0_5/";
declare function xf:CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v1_0($cs2RechnungenResponse as element(ns2:cs2RechnungenResponse))
as element(ns0:getDebitorRechnungenResponse) {
<ns0:getDebitorRechnungenResponse schemaVersion="0.6">
          if ($cs2RechnungenResponse/ns2:Cs2DebitorOpVie) then
          <ns0:debitorRechnungList>
     for $Cs2DebitorOpVie in $cs2RechnungenResponse/ns2:Cs2DebitorOpVie
     return
     <ns0:debitorRechnung>
          <ns1:peid>0</ns1:peid>
          <ns1:rechnungsnummer>{ data($Cs2DebitorOpVie/ns2:f40Belnr) }</ns1:rechnungsnummer>
          <ns1:rechnungsdatum>{ xs:date(fn-bea:remove-timezone-from-dateTime(data($Cs2DebitorOpVie/ns2:f40Fadat))) }</ns1:rechnungsdatum>
          <ns1:faelligAm>{ xs:date(fn-bea:remove-timezone-from-dateTime(data($Cs2DebitorOpVie/ns2:f40Valut))) }</ns1:faelligAm>
     <ns1:behoerde>{ data($Cs2DebitorOpVie/ns2:AMT_BEZEICHNUNG) }</ns1:behoerde>
     <ns1:positionList>
          <ns1:position>
               <ns1:positionsnummer>1</ns1:positionsnummer>
                                             <ns1:betrag>{ data($Cs2DebitorOpVie/ns2:f40Dmbet) }</ns1:betrag>
                                             <ns1:waehrung>
                                                  <ns1:isoCode>CHF</ns1:isoCode>
                                                  <ns1:bezeichnung>Schweizer Franken</ns1:bezeichnung>
                                             </ns1:waehrung>
          </ns1:position>
          </ns1:positionList>
     <ns1:status>offen</ns1:status>
          if ($Cs2DebitorOpVie/ns2:f40Mahns/text() > "") then
               <ns1:mahnstufe>{ xs:int(data($Cs2DebitorOpVie/ns2:f40Mahns)) }</ns1:mahnstufe>
          else ()
     </ns0:debitorRechnung>
     </ns0:debitorRechnungList>
     else ()
<ns0:resultatStatus>
     <ns3:code>Erfolgreich</ns3:code>
     <ns3:beschreibung>Rechnungen aus MFK fehlen</ns3:beschreibung>
</ns0:resultatStatus>
</ns0:getDebitorRechnungenResponse>
declare variable $cs2RechnungenResponse as element(ns2:cs2RechnungenResponse) external;
xf:CARI_CS_2DBAdpter_to_RechnungsServiceGetOffenePosten_v1_0($cs2RechnungenResponse)
_3. this should result in this response, but it doesn't_
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Body xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<v1:getDebitorRechnungenResponse schemaVersion="0.6" xmlns:v1="http://www.llv.li/fin/services/rechnungService/v1">
<v1:debitorRechnungList>
<v1:debitorRechnung>
<v11:peid xmlns:v11="http://www.llv.li/fin/types/v1">333</v11:peid>
<v11:rechnungsnummer xmlns:v11="http://www.llv.li/fin/types/v1">555</v11:rechnungsnummer>
<v11:rechnungsdatum xmlns:v11="http://www.llv.li/fin/types/v1">2011-05-05</v11:rechnungsdatum>
<v11:faelligAm xmlns:v11="http://www.llv.li/fin/types/v1">2011-05-05</v11:faelligAm>
<v11:behoerde xmlns:v11="http://www.llv.li/fin/types/v1">Amt für Gesundheit</v11:behoerde>
<v11:positionList xmlns:v11="http://www.llv.li/fin/types/v1">
<v11:position>
<v11:positionsnummer>1</v11:positionsnummer>
<v11:betrag>100</v11:betrag>
<v11:waehrung>
<v11:isoCode>CHF</v11:isoCode>
<v11:bezeichnung>Schweizer Franken</v11:bezeichnung>
</v11:waehrung>
</v11:position>
</v11:positionList>
<v11:status xmlns:v11="http://www.llv.li/fin/types/v1">offen</v11:status>
</v1:debitorRechnung>
</v1:debitorRechnungList>
<v1:resultatStatus>
<v11:code xmlns:v11="http://www.llv.li/common/types/v1">Erfolgreich</v11:code>
<v11:beschreibung xmlns:v11="http://www.llv.li/common/types/v1">Rechnungen aus MFK fehlen</v11:beschreibung>
</v1:resultatStatus>
</v1:getDebitorRechnungenResponse>
</soap-env:Body>
</soapenv:Envelope>
But I do not get this expectet result, all I get is the BEA-382513: OSB Replace action failed: bad value for type element anyType?
Any help would be appreciated.
Thanks
Best regards
rk

cs2RechungungenResponse or cs2RechnungenResponse ? the error message says cs2RechungungenResponse, but the actual element is cs2RechnungenResponse (one less "u")

There are values for cost element 80000 that are not assigned to any line I

Hi,
While calulating WIP I am getting below error:
There are values for cost element 80000 that are not assigned to any line ID
Message no. KJ161
Diagnosis
Not all values for the cost element are assigned to a line ID.
Procedure
Assign the cost element to a line ID. If you don't want to include the cost element in results analysis, assign it to a line ID of category N.
You can access a detailed list of unassigned cost elements as follows: Start results analysis in the individual processing mode (transaction KKA1, KKA2, or KKA3). Select the field Full log. Execute the function. On the next screen, choose Logs -> Parameter List in the menu. A list is generated. The unassigned values are shown at the end of the list.
If cost element "+++++++++" was shown in the message, this is because in the assignment of costs and revenues to line IDs, you have not used a cost element other than the full masking "+++++++++". In this case a presummarization eliminates the information on the cost element.
Cost Element 80000 is of type 43 Internal activity allocation, I have Masked this in OKGB as below:
Controlling Area = FLGP
RA Version = 0
Masked Cost Element = 000008++++
Masked Cost Center = ++++++++++
Masked Activity Type = +++++
ReqToCap= COS (Secondary Cost)
I have Configure OKGA also but still system is giving error.
Please help me to understand.
Regards,
Vivek

I was wondering if you could help me I am trying to configure the RA key for Refurb orders and when I go into txn OKGB for the Assignment of C/E for WIP there is sample config already there which I copied. But I am having difficulty getting the KK1A to work I am getting the message as outlined above. Could you explain how this OKGB works and how to configure it a bit more fully. In my sample config there is a ReqTOCap section and in it there are letters like ABR, EK, FK, EL what do they mean. This is a screen shot of it. I am not sure how to go about this entirely so any light you could shed would be greatly appreciated. Can you suggest a good resource or documentation you may have, would be greatly appreciated.

How to set a new value for an element inside an XML file....

Hi guys...!
I'm using Java to process an XML file and I want to able to make changes to the document. For instance, let say:
<firstName> John </firstName>
and I want to change the content or value of the element "firstName" to "Marc"
<firstName>Marc</firstName>
How can I get this done?
This is the code that I have in my java file...But it doesn't work. Nothing happens. The firstName remains "John".
Do I need to get the owner document to do this?
firstPersonElement.getElementsByTagName("firstName").item(0).getFirstChild().setNodeValue("Marc");
Any suggestions will be appreciated...
Thanks...
--- Spirit_Away...

IMHO, it should work the way you describe. Do you
actually save the DOM tree to file afterwards?Good point. No, actually.
How do you save the document in that case ???
Any suggestions...
Thanks...
--- Spirit_Away

Info about Element entry values for an element

Hi
Im trying to get info on something. Im supposed to get entry values for a certain Sc med element.
Now i know that the entry values reside in pay_element_entry_values_f.
The values i need are for the input EE Contr
Now when i query the pay_element_entry_values_f table I see that the screen entry value for the input EE Contr is null.
But when i use the screens to look at the value in the EE Contr and ER Contr i see values in double quotes in red like "377.22".
The Pay value is null which is why i see null in the pay_element_entry_values_f screen entry value column.
I wanna know how i can pull that value(in red double quotes) in an sql query.I mean do we know which table these seemingly default values are stored in?
Ive already tried using record history and other things to get it.but the tables i see are null.
Any help in getting this info is much appreciated.
Thanks
J

This value can be obtained from pay_input_values_f and the data u see in " " in red color is due to the Hot default flag checked.
Reagrds,
Prashanth
Edited by: user574397 on 6 Apr, 2010 5:53 PM

JList: how a set a "name" and "value" for a element

my JList
DefaultListModel listMBuddy;
JList listBuddy;
listMBuddy = new DefaultListModel();
listBuddy = new JList(listMBuddy);
listMBuddy.insertElementAt("buddy name 1", listMBuddy.size());
listMBuddy.insertElementAt("buddy name 2", listMBuddy.size());
listMBuddy.insertElementAt("buddy name 3", listMBuddy.size());a string "buddy name 1" will be show in JList, it is like a name of element.
how i set value for "buddy name 1"? like html
<select>
<option value="5">buddy name 1</option>
<option value="7">buddy name 2</option>
<option value="2">buddy name 3</option>
</select>
thanks

You have to write your own renderer.
example:
public class MyListsRenderer extends JPanel implements ListCellRenderer {
     JTextArea t;
     private LinkedHashMap<Integer, String> departmentsList;
     private LinkedHashMap<Integer, Boolean> checkedList;
     public MyListsRenderer(int tabSize) {
          t = new JTextArea();
          t.setTabSize(tabSize);
     public Component getListCellRendererComponent(JList list, Object value,
               int index, boolean isSelected, boolean cellHasFocus) {
          Integer id = (Integer) value;
          // you need to create class that get an id (value) and return name
          //this is my example:
          String name = Contacts.getInstance().getContacts().get(
                    (Integer) value);
          t.setText(name);//this is the text in the list row
          add(t);
          return this;
}

Default insertion for missing elements using DBMS_XMLSave.insertXML

Hi,
I am trying to insert default values for some columns, without having those column names as elements in the xml document. Is it possible to do so?? This is the code I am using for now, but it inserts null values for missing elements in the xml document.
insCtx := DBMS_XMLSave.newContext ('TABLENAME'); -- get the context
rows := DBMS_XMLSave.insertXML (insCtx, p_xmlDoc); -- insert the doc
DBMS_XMLSave.closeContext (insCtx); -- close the handle

Only thing I noticed with dbms_xmlstore.insertXML, was when my xml document had "<?xml version = "1.0" ?>" at the start, it gave an error "LPX-00209: PI names starting with XML are reserved"That's probably due to the XML document not starting exactly with "<", like this :
SQL> DECLARE
2
3    xmldoc   clob := '
4 <?xml version="1.0"?>
5        <ROWSET>
6       <ROW>
7        <COL1>1</COL1>
8        <COL2>TEST1</COL2>
9       </ROW>
10       <ROW>
11       <COL1>2</COL1>
12      </ROW>
13     </ROWSET>';
14
15    ctx      dbms_xmlstore.ctxHandle;
16    numrows number;
17
18 BEGIN
19
20    ctx := dbms_xmlstore.newContext('MY_TABLE');
21    numrows := dbms_xmlstore.insertXML(ctx, xmldoc);
22    dbms_xmlstore.closeContext(ctx);
23
24 END;
25 /
DECLARE
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00209: PI names starting with XML are reserved
ORA-06512: at "SYS.DBMS_XMLSTORE", line 78
ORA-06512: at line 21 However, it runs OK if the prolog actually starts the character stream :
SQL> DECLARE
2
3    xmldoc   clob := '<?xml version="1.0"?>
4        <ROWSET>
5       <ROW>
6        <COL1>1</COL1>
7        <COL2>TEST1</COL2>
8       </ROW>
9       <ROW>
10       <COL1>2</COL1>
11      </ROW>
12     </ROWSET>';
13
14    ctx      dbms_xmlstore.ctxHandle;
15    numrows number;
16
17 BEGIN
18
19    ctx := dbms_xmlstore.newContext('MY_TABLE');
20    numrows := dbms_xmlstore.insertXML(ctx, xmldoc);
21    dbms_xmlstore.closeContext(ctx);
22
23 END;
24 /
PL/SQL procedure successfully completed.
With the dbms_xmlsave.inserXML, [...] it wont insert the default column values.Now that's strange...
I understand there could be differences in the parsing implementation, but in the end both processes must issue an INSERT into the target table using plain SQL, so I really wonder why default values are not applied.
I'll try to reproduce when I have access to a Java-enabled db.

Help needed on mapping information for AT701 element in EDI X12 214 Transportation type (X12_00401_214 schema)

Hi all,
As per the EDI defined standard schema, AT701 element takes the following Enumeration values.
<xs:element minOccurs="0" name="AT701" type="X12_ID_1650">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo notes="Shipment Status Code_1650" />
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:simpleType name="X12_ID_1650">
<xs:restriction base="xs:string">
<xs:enumeration value="A3" />
<xs:enumeration value="A7" />
<xs:enumeration value="A9" />
<xs:enumeration value="AF" />
<xs:enumeration value="AG" />
<xs:enumeration value="AH" />
<xs:enumeration value="AI" />
<xs:enumeration value="AJ" />
<xs:enumeration value="AM" />
<xs:enumeration value="AN" />
<xs:enumeration value="AP" />
<xs:enumeration value="AR" />
<xs:enumeration value="AV" />
<xs:enumeration value="B6" />
<xs:enumeration value="BA" />
<xs:enumeration value="BC" />
<xs:enumeration value="C1" />
<xs:enumeration value="CA" />
<xs:enumeration value="CD" />
<xs:enumeration value="CL" />
<xs:enumeration value="CP" />
<xs:enumeration value="D1" />
<xs:enumeration value="I1" />
<xs:enumeration value="J1" />
<xs:enumeration value="K1" />
<xs:enumeration value="L1" />
<xs:enumeration value="OA" />
<xs:enumeration value="OO" />
<xs:enumeration value="P1" />
<xs:enumeration value="PR" />
<xs:enumeration value="R1" />
<xs:enumeration value="RL" />
<xs:enumeration value="S1" />
<xs:enumeration value="SD" />
<xs:enumeration value="X1" />
<xs:enumeration value="X2" />
<xs:enumeration value="X3" />
<xs:enumeration value="X4" />
<xs:enumeration value="X5" />
<xs:enumeration value="X6" />
<xs:enumeration value="X8" />
<xs:enumeration value="XB" />
</xs:restriction>
</xs:simpleType>
Now, in my sample input file I am having a column "MileStone", and for example: If I have
"Picked Up Date" in that column, I need to pass "A3" as the value for
AT701 element as per the above code snippets.
Please let me know how to map the "Milestone to "AT701" element.
If I straight away map those two fields, I am getting the below error :
error btm1046: Output validation error: The 'AT701' element is invalid - The value 'MileStone_0' is invalid according to its datatype 'http://schemas.microsoft.com/BizTalk/EDI/X12/2006:X12_ID_1650' - The Enumeration constraint failed.
So, please guide me on how to map the above fields using the functoids.
Thanks in Advance..

Hi Anand,
You can try
Value Mapping functiod along with Logical Equal functiod for this requirement.
Connect the element “MileStone”
to the Logical Equal functiod as the it’s first parameter. And add “Picked Up Date”
as the second parameter.
Connect output of the Logical Equal functiod as the first parameter to the Value Mapping functiod and “A3"
as the second parameter.
Connect the output of
Value Mapping functiod “AT701”
element.
This maps the value “A3”
to the element “AT701”, if the value of “MileStone” element is
“Picked Up Date”
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Set currency value of pricing element in condition tab - VA21

Hi GURU,
Would you please help to identify the way to set the following currency values for pricing element in condition tab when creating system quote by va21:
Rate unit (RV61A-KOEIN)
SD document currency (KOMK - WAERK)
Thanks in advanced,
Regards,
Thang

Solved

Is it possible to add more input values for a payroll element?

Hi All
I have created an element with 1 default input value 'pay value' and another input value '1xx1'. I have linked this to payroll and attached to many employees. Now due to business requirment, I need to add one more input value '2yy2' and also I need to change the formula. Eventhough its a minor change in formula, without a new input value it will not work. I tried to add a new one by datetracking to the element creation date without sucess.
Is it possible to add input values after saving an element?
Regards
Rahman

You can Change the Required Input Value to Not-required
Alter the Sequence of the Input Value to be displayed in the Element Entry Screen
You can Change the Input Value Validation Rule minimum, Maximum, Lookup and Formula
Change your specification of which input values create Database Items. Note, however, you cannot remove Database Items if they are used in any formulas or QuickPaint reports.
You cannot remove existing input values or add new one if you have created any entries for the element
For more details you can refer http://ramesh-oraclehrms.blogspot.com/2007/08/maintaining-element.html

Retaining Variable Value for Scenario Restart

I have a slave-package where i use many variables for JDBC connection/url/login/passwd and Target File Path - all have been defined as type HISTORIZE
My packages are as follows
(1) There are many odiSqlUnload steps in the slave-package which uses the connection information & file path from the variables which have been declared in it.
(2) I just have declare variable steps in the slave-package, and have created a master-package which calls this slave-package's scenario using the command[i] "odiStartScen -GLOBAL.var_name=<var_value>"
so that all variables get their values from the master-package's call with variable values sent thru it
(3) Now, the problem occurs when I have to re-start my slave-package's scenario. Say for eg, the first step in my slave-package works fine, but errors out on the next step;
But when I re-start it for the next step, ODI doesn't seem to pick up values from the variables even though they are of type HISTORIZE, and I get an error with empty values for JDBC, URL & file path which I had specified as variables.
Why is it that the variables are not able to retain their values.
Any help would be greatly appreciated!

finally I get it. I have to use #varname instead of :varname, otherwise it won't get error but just cannot get value. and I find out this #varname cannot be defined anywhere, otherwise the value will get lost also.

At SAP PI End Value for element getting duplicated !!!!

Hello Experts,
We are currently undergoing Integration Testing for SAP-INFOR WMS , in a particular scenario for Outbound IDOC there are two line item with different Valuation types .PFA screen shot of Outbound IDOC generated at SAP R/3 . Also at SAP PI end XML file of IDOC too show two line items with different Valuation types. But while looking at Request Message Mapping Node Payload in T-code IDX5 the outbound generated XML to external application is showing two line items with same Valuation type, in this case the the Valuation type of 1st line item is copied to second line item.
I had looked into mapping for this interface the mapping look okay, in this case a for each loop is introduced in XSLT Mapping. in my opinion the vlaues for valuation types are not getting cleared for the second iteration.
Kindly let me know if there is something in Mapping where we can clear value after every iteration.
Best Regards
Priyesh Shah

Hi Udo Martens,
Thanks for your valuable inputs, i rectified the error on my own after i can across a bug in XSL input file,
While assigning source path to a target XSLT element inside a for-each loop the exact path was given for each element inside the for-each ; where else we have to provide only the name of the field.
for ex before mapping correction.
<Lottable02>
<xsl:value-of select="/ZSTORE1/IDOC/Z1STOHD/Z1STOLN/BWTAR" />
</Lottable02>
After Mapping Correction
<Lottable02>
<xsl:value-of select="BWTAR" />
</Lottable02>
Best Regards
Priyesh Shah

'Incorrect value type for array element in index N'

Please help. Preflight is flagging multiple 'Incorrect value type for array element in index N" > Required key /F is missing >Array element at index 0 is of wrong type' messages for pages throughout my text document with embedded navigation and annotations.What does it mean? Is there anything I can do?
The origins of the file are from a selection of emails taken from Mail and gmail, and letters probably written on pc (Office) and converted to pdf...
I'm on Mac Mavericks.
Thanks for reading.

What problem are you trying to solve with preflighting? What are you checking for?

Type defined array of clusters for holding configuration data - setting default values for each array element

Hi,
I was wondering if I could get some information and opinions about using a type defined array of clusters to hold configuration data. I am creating a program to test multiple DUTs and wanted to have a type defined control for each DUT containing the information needed to create the DAQmx tasks for all of the signals for that DUT. I am wanting to do this so that the data is hard-coded and not in a file that the user could mess up.
The type def controls are then put in a subVI that chooses the appropriate one based on the DUT Type enumeration wired to a case structure.
I am having problems with the type defined control. I am seeing issues when attempting to save a unique configuration to each array element in the array of clusters. Somehow it worked to begin with, but now clicking "Data Operations --> Make Current value default" on individual elements of the cluster or the entire cluster (array element) is not saving the data when I re-open the type def control. What am I doing wrong? Am I trying to do something with arrays of clusters that I should not be doing?
I have attached one of the type defined controls for reference. I tried changing it to Strict to see if that helped, but no luck.
To reproduce, change the resource string for array element 0 and make the new value the default value. Then close the type def, and re-open it. The old value is still present in that element. The VI is saved in LabVIEW 2012.
Solved!
Go to Solution.
Attachments:
CM_AnalogInputs.ctl ‏11 KB

Values of a typedef are not proprigated to instances of the control. THey will pick it up if created AFTER the data values have been changed. THey will not get updated with future changes. You should either create a VI specifically for hardcoding your values or implement a file based initialization. The file based would be much better and more flexible. If you don't want users to modify the data simply encrypt it. There is a noce blowfish library you can download.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How do you subtract different values for specific array elements?

Hi LabVIEW Community,
I am new to LabVIEW and Im working on my first application. One of my challenges that I am having problems solving is how to subtract specific values from specific elements in an array.
My aplication is to measure the distance between a sensor and a magnet, however the initial distance for each sensor to magnet is different. I have converted the voltage to a distance using the Math Node for each element and now need to correct these values by subtracting their individual initial value.
The source is a 1D array of DBL64 consisting of 32 elements and each of these values needs to have a different value subtracted.
eg:
Element 1 - 5.557
element 2 - 2,34
element 3 - 7,654 and so on
I have tried to seperate (index the array) and subtract the values from each element and then combine them again. This has not been effetive. I need to write these values to an .txt file and also use them in another calculation.
I have attached my attemted sub VI.
Any advise would be really apprecieated.
Solved!
Go to Solution.
Attachments:
Sub VI Split Array_Correct Distance.vi ‏36 KB

You don't need to overthink it. There's a really simple method. Generate an array that contains all your offsets you want. Then subtract it off.
It's the same VI with this change:
Attachments:
Sub VI Split Array_Correct Distance_LV12_MOD.vi ‏24 KB

Retaining value for tableView element

Similar Messages

Maybe you are looking for