Retina display clamshell misaligned after repair?

So I had to send my rMBP in to get the clamshell replaced this weekend because there were spots on the screen (mura) and a piece of debris in between the LCD and the backlight. I'm impressed with the speed but maybe that speed comes at a cost. I received it back today, and the clamshell is misaligned. It's shifted over to the right about 0.4 or 0.5 mm, and is rotated maybe a degree off axis. You can see at the base of the hinge where there's a very slight gap on the left side of the case where it meets the black hinge, while on the other side it's completely flush, where clearly there needs to be a slight gap on both sides. I'm really frustrated because the nearest apple store is over 2 hours away for me and as a student I can't afford to send it in the mail again just to have the display properly aligned like it should have been the first time. Any suggestions? There's got to be a way to realign the display hinge without disassembling the whole damned thing. Honestly, it would have taken an extra 10 seconds to make sure the display was properly aligned.

Yeah after doing research, I found essentially the same thing. I'll have to wait another 2 weeks though before I can take it in. I guess they can't really claim that I caused the damage though because there are no cosmetic indications of any sort of drop. So it shouldn't be a problem. The other thing I noticed is that because of the misalignment the display creaks a bit when closing. Really hoping they didn't permanently damage something in the base by over torquing the hinge. I've read stories about people who had creaky displays that just got worse and worse and apple couldn't fix it. Really hoping that's not the case.

Similar Messages

Ipad 4 retina display is slow after iOS 8

ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).
also I've got message from apple that im not authorised to post this message, so if it goes online i think after many years of apple desktop and mobile i am done with it))).

Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

Ipad 4 retina display is slow after iOS 8, also upgrade the the iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great.

ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).

Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

Why does my retina display keep flickering after I get it fixed?

Since I bought my Macbook Pro 2012 in July 16 GB the display has been flickering every once and a while. Sometimes it gets so bad that you can't even see the screen. All it does it redraw the video over and so fast to make the screen appear to flicker. They have already had it at the Apple store twice. The first time they could not reproduce the problem, the second time they claimed they replaced the logic board. It has started to flicker 2 weeks after I got it repaired. I need help!!

Simply put, you have a defective MBPR, and need a repair. I would contact Apple Care and explain the situation and be like, "Its been in twice, with the logic board being replaced," They will guide you through what needs to be done.

Guys my macbook pro retina display reboots automatically after updating the maverick os x. can anybody tell me what the problem is?

After uppadating mavericks os x last 3hrs on my macbook pro with retina (15 inch, mid 2012), it has rebooted automatically twice in a hour. it is really annoying. what seems to be the problem. can anyone help me out. waiting for your help guys. apple is really ******* us up now.

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic report (with a name that begins with "Kernel" and ends in ".panic") under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. Post the entire contents of the report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post any other kind of diagnostic report, such as a hang report.

On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
"USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
I unplugged the device and the message still keeps coming up.
This is what I have done so far to troubleshoot:
I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
1. Reinstalled OSX
2. Restore the last known good Time Machine Backup.
This did not fix my issue, so I called Apple Support and they told me this:
1. Turn Power off.
2. Wait 15 seconds.
3. Plug in Magsafe adapter.
4. Wait 15 seconds.
5. Hold down the Shift+Option+Power Button for 20-30 seconds.
6. Turn Power back on.
Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

Advice on Retina Display buy after unhappiness with 13" MBP

i am hoping to buy a new retina display macbook pro soon and would like to only get a 13" sized model but i was extremely unhappy with the performance of my 2009 13" which will be out of applecare warranty in about two months.
is there any way to get a handle on "how high" i have to go with my purchase and what to focus upon? i mean, i understand that i want to get as many cores as possible and that i want to get as fast a processor as possible and that the independent graphics card is on the 15" and not on the 13" but i really don't work a lot on my laptop all that much or all that intensively. OTOH, the current lappy is not so happy for some reason.
i have adobe creative suites 5.5 on my 2006 mac pro and i have parallels 8 and some CAD software that i need to use in windows on the mac pro but i really, really don't do a lot of work with my laptop and have still been quite unhappy despite putting a full 8 GB in this machine about a year or a year and a half into buying it.
is there a way to make an intelligent decision on where to spend my money on a new machine without being totally paranoid and thinking i have to buy the top of the line 15" with respect to all of the above options (and spending 3K on a machine i don't use very intensively)? i mean, i may go to a conference once every two years and want to work in CAD in parallels but other than that i am almost strictly on the Mac Pro for anything moderately intense.
fwiw, i would like to go with the retina display as it is the most current technology.
TIA

Hardware does fail occasionally, but part of why I would take mine to an Apple Store would be for an opinion on whether the problem was hareware or software. Since it has been less than a year since your bought your MBP-R, it is still under warranty, just not eligible for free phone assistance. If you have neither an Apple Store nor a trusted repair facility available to you, that will make it tougher.
Do I understand you to say this only happens after it has been asleep for a longish time? You can keep it from happening by waking it up sooner or by shutting down when you expect to be away for a longer time? I'm not sure what that tells us, but it in interesting.
Do you by any chance have a bootable copy of your system on an external disk? Preferrably one that was made before you started experiencing the symptoms. If so, does the MBP-R present the same symptoms when booted from that copy?

MBP w/Retina Display Problem After Sleep

I have bought a MBP Retina Display 15" in July 2012 and until recently I did not have any problems with my Mac. However, I am having the same problem as the one in this video http://www.youtube.com/watch?v=zt0tS8KJKuQ
There seems to be no problem if I don't leave my mac on sleep for so long but what is the sleep function and power nap for in the first place. Is there any solution to this.
Thx

Hardware does fail occasionally, but part of why I would take mine to an Apple Store would be for an opinion on whether the problem was hareware or software. Since it has been less than a year since your bought your MBP-R, it is still under warranty, just not eligible for free phone assistance. If you have neither an Apple Store nor a trusted repair facility available to you, that will make it tougher.
Do I understand you to say this only happens after it has been asleep for a longish time? You can keep it from happening by waking it up sooner or by shutting down when you expect to be away for a longer time? I'm not sure what that tells us, but it in interesting.
Do you by any chance have a bootable copy of your system on an external disk? Preferrably one that was made before you started experiencing the symptoms. If so, does the MBP-R present the same symptoms when booted from that copy?

I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?

iOS: Device not recognized in iTunes for Mac OS X

I just purchased my Macbook Pro retina display OS X 10.7.4 in June 2012. Shortly after I began using it, it began randomly restarting itself while in use. Why and how do I fix this?

So as I said in the title, I purchased my new Macbook Pro retina display OS X 10.7.4 in June 2012 and recieved in early July. Shortly after I started using the laptop, it began randomly restarting itself. It does this about once a week while I am just using the laptop for normal internet browsing. I haven't downloaded any outside software that the system could be rejecting and it is fully charged. Any ideas on why this is happening or how to fix it?
Also this is a total random question, but there is a residue on my laptop that is faint but randomly shows up. I'm almost positive that it is nothing on my hands or where I place the laptop. I wasn't sure if it was something possibly coming from the side vents. Thanks for the help!

Exactly what Shootist007 states - take it in for service or replacement - could be a simple software issue or it could be a hardware issue...
Don't even bother messing with it.....Might screw up even more.....
Make sure your files are backed up in case they give you a replacement....
Good luck - hope you get it sorted out...

Download, battery, and sleep problems on macbook pro with retina display after upgrading to Mountain lion

After waiting a few days to download OS X Mountain lion, I finally installed it on my new MacBook with retina display a couple days ago. I love the interface and all the new features, but I've noticed some problems I really need to resolve. I'm constantly downloading large files and I noticed thhis change:
Before, on Lion, I could download files from Safari or the Internet and the computer would sleep whenever it was set to on energy preferences and the download would resume. This would let the computer conserve energy so the download could progress further when on battery. Now, I noticed that my computer never goes to sleep! Its set to have the display sleep in 5 minutes and the computer in 15 on both battery and when plugged in, but it never does either. I don't know if it has to do with the fact that power nap is on even when using battery. So now the Mac is constantly on when downloading something and instead of downloading a one gigabyte file that would take up 15% of my battery, it takes up 60% since it never sleeps. When I tried downloading something and then manually putting the computer to sleep, the download was interrupted and it said Wi-Fi connection lost so I have to start the download over again.
That's basically all three problems in one situation. I even put the brightness all the way on low so the screen is black when downloading, but it still uses up much more battery than before. Can someone help find a solution?

Did you try turning off power nap?

Black screen on MacBook Pro Retina Display after installing Moutain Lion. Need Help!

My macbook pro (retina) screen went black after I installed Mountain Lion.
I got a HDMI cable to another monitor and the image worked nicely there.
But i cant get it back on my MacBook Pro! I tried taking out the HDMI cable, restarting, searching on settings configs..
What should I do?
Are there any drivers i should install to get image back on my MacBook Pro Retina Display?
Has this happened to anyone else?
Thanks in advance for all the help.

That helped me finding other people with similar problems.
But there is a major difference!
-They have a black screen after they login.
-My screen is black NOW! And I'm only using my BRAND NEW rmbp with the HDMI cable to my TV!
This isnt good at all and I would like to solve it asap..
I tried reinstalling Mountain Lion, taking out the hdmi cable and rebooting many times.
Until now, nothing!
Is my screen broken or maybe my video card has some problems?
I hope not! I just traveled from the US to Brazil and I dont want to search for an Apple Store here.
Any tips or ideas are welcome, thank you.

What is the best way to look after Macbook Pro Retina Display battery?

Hello,
I am a little confused on how to look after the battery in my new Macbook Pro with Retina Display. I have read lots of different things and I do not seem to get a clear answer.
I feel by charging my laptop all the way, then using till 0% and doing it all over again uses the cycles faster and therefore meaning it will not last as long. I also read that having that laptop plugged in a lot of the time will also damage the battery. I have read the document Apple have posted online but it doesn't give me a time frame of what is or is not a good length of time for it to be fully charged and plugged in for. Should I charge then unplug or is it safe to have it plugged in for a few days when being used? I always unplug regardless when I am not in the room with the laptop.
Could someone please advice me on what they feel is the best way to keep the battery healthy. Thanks Benjamin

I think this is a great topic to get advice from the community, I have often wondered about this topic too.
My thoughts/experience are:
Cycle count seems to be the factor that ages the battery - although it is not exactly clear when your cycle count will click up by 1. I suspect it must be significant use or period off charge - but no idea how to quantify that.
I mostly have my unibody 15" MBP (early 2011) plugged, so after 14 months my cycle count is 28 and the battery charges to around 93-96% of initial capacity.
I use Watts and coconutbattery to keep an eye on battery condition and Watts is set to remind me to do a complete discharge/recharge (calibration) every month or so.
However I was away for 10 days recently and left MBP plugged in but shutdown. Before going I'd been keeping MBP extra busy and had skipped a calibration. On return I was using normally and then got a clue that all was not well with my battery although it said fully charged in menu bar.
I pulled the magsafe, instant off just like pulling lead on a desktop. No charge.
Magsafe LED showing green but no charge and not charging. Battery status said to replace battery.
Feeling upset at the suddendeath of a good friend I tried to reset SMC but the instructions seemed not to help.
Finally LUCK with an idea: I shutdown, unplugged, waited a bit, plugged while holding power button down and LED went orange, my battery started charging and went up to 96%.
I had been about to go pay for a new battery!
So good usage is important and we/I are not that well informed about best usage - I had been looking.
Maybe not everywhere but....

Macbook Pro Retina display says "No batteries available" after legitimate system software update

Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.

Issue Description
On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
It was delivered August 8, 2012. It cost me $3,265.16
I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
In the one year since I bought it, I have had only 2 issues;
• A case of display flickering that resulted after a system software update on August 28, 2013
(Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
• A case of battery failure that resulted after a system software update on October 11, 2013
(Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
Symptoms after system software update
• Battery Icon on status bar disabled with a message "No batteries available"
• Battery not charging
• LED on the Magsafe power adapter no longer show
• Keyboard backlights no longer show
• Notebook fan loud/noisy and permanently at high speed
• Date and time reset to a date in the past at each restart
• Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
• An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
Recommendations from Apple Support
• Perform SMC Reset (http://support.apple.com/kb/HT3964)
(Done - no change in status)
• Run Disk Utility
(Done - no errors found)
• Run Apple Hardware test (http://support.apple.com/kb/HT1509)
(Done - no errors found, no change in status)
• Visit Apple Store
(Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
• Check System Report/Hardware/Power
(Done - Health Information/Cycle count:0, Battery installed: No)
• Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
(Done - no change in status)
Comments and additional Observations
Please note the following;
• All of the symptoms above appeared after a system software update on October 11, 2013
• This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
• The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
• Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
• The said update was not interrupted or anything of the sort
• On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available"
I make the following deductions solely based on my observations
• An apple authorized system software update broke the system
• The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
• It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
• The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
• The symptoms match what an SMC reset should resolve according to Apple documentation
• This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
Summary;
The system is running OS X 10.8.5
I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.

New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

Retina display clamshell misaligned after repair?

Similar Messages

Maybe you are looking for