Retracting acitvity input using CCA retractor
We are using the upr_cost_plan_exec retractor FM to retract hours to R/3. The parameter group setting are as follows:
Retr R/3 Comp - 9 (PS)
Retractor control - 2 (Activity input)
In the sender structure I have mapped the hours to 0QUANTITY in upb_snd_cops.
The function executes without error in BPS, but we are not able to see the data in R/3.
Has anyone successfully retracted a quantity using this retractor FM? What could be going wrong?
Is there an error in the FM causing this?
In the LUPREF02 include of the FM I found the following commented out, is this the reason why quantity is not being retracted.
quantity not used in primary costs
assign component gf_quantity of structure <ls_kyfs> to <l_chavl>.
g_quant = <l_chavl>.
Is there an OSS note out for version 31B? I found an OSS # 889634 but for higher versions.
Hi,
In the program LUPREF01, the BAPI BAPI_COSTACTPLN_CHECKPRIMCOST fm is being called. break before going into this FM and get the structure of data being passed. Simulate/Test the same FM in R3 with the same structure of the data.
Pls. check the object number (for the WBS elements), it has a CONV exit. Test/check with different representation of the object number, that should guide you, what's wrong in BPS side.
HTH.
Regards,
Nataraj.
Similar Messages
-
Hi,
I am wondering if any one successfully implemented CCA retractor in version BW-BPS 3.50?
Thanks
CNHi CN,
Have a Look at these threads . .
CCA Retraction with BW BPS
Retraction into CCA with Public Sector extension
Regards,
Mohan -
XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh
Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
''If it displays in Firefox:''
It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
''If it displays in IE or embedded in another Microsoft application:''
In a web search I found these suggestions:
(1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
(2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
Any luck? -
The XML page cannot be displayed Cannot view XML input using XSL stylesheet
Hi Oracle Gurus,
I got this error ...once i have submitted request it shows warning ..I opened output it shows the below error...i cant understand how to resolve this error...Please help me...It is PL/SQ L STORED PROCEDURE CODE...
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A semi colon character was expected. Error processing resource 'http://orappsus64.tsindia.in:8009/OA_CGI/FNDWRR.exe?temp_id...
<CP_PROJECT>IT/Quintiles/J&J COGNOS</CP_PROJECT>
----------------------------^
n-left:1em;text-indent:-2em"> <GL_MAIN_PERIOD>Jun-12</GL_MAIN_PERIOD>
<TOTAL_REVENUE>4026.14</TOTAL_REVENUE>
<GL_PERIOD>Jun-12</GL_PERIOD>
</G_TOTAL_REVENUE_CAT>
THIS IS MY LOG FILE
[10/1/12 10:44:26 AM] [main] Starting GSF service with concurrent process id = 157635.
[10/1/12 10:44:26 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/1/12 10:44:26 AM] [Thread-22] Service thread starting up.
[10/1/12 10:44:26 AM] [Thread-23] Service thread starting up.
[10/1/12 10:52:33 AM] [OPPServiceThread1] Post-processing request 1296337.
[10/1/12 10:52:33 AM] [157635:RT1296337] Executing post-processing actions for request 1296337.
[10/1/12 10:52:34 AM] [157635:RT1296337] Starting XML Publisher post-processing action.
[10/1/12 10:52:34 AM] [157635:RT1296337]
Template code: XXTGSCPR004
Template app: PA
Language: en
Territory: US
Output type: EXCEL
[100112_105234216][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[100112_105234216][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[100112_105234216][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[100112_105234216][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[100112_105234216][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[100112_105234217][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[100112_105234217][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[100112_105234217][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[100112_105234217][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[100112_105234217][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[100112_105234217][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[100112_105234217][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=orappsus64.tsindia.in)(PORT=1530)))(CONNECT_DATA=(SID=clone)))]
[100112_105234217][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[100112_105234217][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[100112_105234217][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[100112_105234218][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[100112_105234218][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[100112_105234218][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[100112_105234218][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[100112_105234218][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[100112_105234218][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[100112_105234218][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[100112_105234218][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[100112_105234218][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[100112_105234218][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[100112_105234218][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[100112_105234219][][EXCEPTION] [DEBUG] [APPLTMP]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/appltmp]
[100112_105234219][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) SE Runtime Environment]
[100112_105234219][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[100112_105234219][][EXCEPTION] [DEBUG] [java.vm.version]:[11.0-b15]
[100112_105234219][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[100112_105234219][][EXCEPTION] [DEBUG] [dbcfile]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/appl/fnd/12.0.0/secure/clone.dbc]
[100112_105234219][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[100112_105234219][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[100112_105234219][][EXCEPTION] [DEBUG] [path.separator]:[:]
[100112_105234219][][EXCEPTION] [DEBUG] [APPLCSF]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/logs/appl/conc]
[100112_105234220][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[100112_105234220][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[100112_105234220][][EXCEPTION] [DEBUG] [sun.java.launcher]:[SUN_STANDARD]
[100112_105234220][][EXCEPTION] [DEBUG] [user.country]:[US]
[100112_105234220][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[100112_105234220][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[100112_105234220][][EXCEPTION] [DEBUG] [user.dir]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/logs/appl/conc/log]
[100112_105234220][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.6.0_10-b33]
[100112_105234220][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[25943]
[100112_105234220][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[100112_105234220][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[100112_105234221][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[100112_105234221][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/appl/fnd/12.0.0/secure/clone.dbc]
[100112_105234221][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[tmp]
[100112_105234221][][EXCEPTION] [DEBUG] [line.separator]:[
[100112_105234221][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[100112_105234221][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[100112_105234221][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[100112_105234221][][EXCEPTION] [DEBUG] [cpid]:[157635]
[100112_105234221][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[100112_105234221][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[100112_105234221][][EXCEPTION] [DEBUG] [java.library.path]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/AP1/oracle/PROD01/apps/tech_st/10.1.3/lib32:/AP1/oracle/PROD01/apps/tech_st/10.1.3/lib:/AP1/oracle/PROD01/apps/apps_st/appl/cz/12.0.0/bin:/AP1/oracle/PROD01/apps/apps_st/appl/iby/12.0.0/bin:/AP1/oracle/PROD01/apps/apps_st/appl/pon/12.0.0/bin:/AP1/oracle/PROD01/apps/apps_st/appl/sht/12.0.0/lib:/usr/java/packages/lib/i386:/lib:/usr/lib]
[100112_105234222][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[100112_105234222][][EXCEPTION] [DEBUG] [java.class.version]:[50.0]
[100112_105234222][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Tiered Compilers]
[100112_105234222][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[100112_105234222][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-128.el5]
[100112_105234222][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[100112_105234222][][EXCEPTION] [DEBUG] [user.home]:[home/applmgr01]
[100112_105234222][][EXCEPTION] [DEBUG] [user.timezone]:[Asia/Kolkata]
[100112_105234222][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
[100112_105234222][][EXCEPTION] [DEBUG] [file.encoding]:[UTF-8]
[100112_105234222][][EXCEPTION] [DEBUG] [java.specification.version]:[1.6]
[100112_105234222][][EXCEPTION] [DEBUG] [CACHEMODE]:[DISTRIBUTED]
[100112_105234222][][EXCEPTION] [DEBUG] [conc_queue_id]:[6269]
[100112_105234222][][EXCEPTION] [DEBUG] [java.class.path]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/AP1/oracle/PROD01/apps/apps_st/comn/java/lib/appsborg2.zip:/AP1/oracle/PROD01/apps/apps_st/comn/java/classes]
[100112_105234222][][EXCEPTION] [DEBUG] [user.name]:[applmgr01]
[100112_105234222][][EXCEPTION] [DEBUG] [DBCFILE]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/appl/fnd/12.0.0/secure/clone.dbc]
[100112_105234222][][EXCEPTION] [DEBUG] [java.vm.specification.version]:[1.0]
[100112_105234222][][EXCEPTION] [DEBUG] [java.home]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre]
[100112_105234222][][EXCEPTION] [DEBUG] [sun.arch.data.model]:[32]
[100112_105234223][][EXCEPTION] [DEBUG] [user.language]:[en]
[100112_105234223][][EXCEPTION] [DEBUG] [java.specification.vendor]:[Sun Microsystems Inc.]
[100112_105234223][][EXCEPTION] [DEBUG] [java.vm.info]:[mixed mode]
[100112_105234223][][EXCEPTION] [DEBUG] [logfile]:[AP1/oracle/PROD01/inst/apps/clone_orappsus64/logs/appl/conc/log/FNDOPP157635.txt]
[100112_105234223][][EXCEPTION] [DEBUG] [java.version]:[1.6.0_10]
[100112_105234223][][EXCEPTION] [DEBUG] [java.ext.dirs]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/ext:/usr/java/packages/lib/ext]
[100112_105234223][][EXCEPTION] [DEBUG] [sun.boot.class.path]:[AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/resources.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/sunrsasign.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/jsse.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/jce.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/charsets.jar:/AP1/oracle/PROD01/apps/tech_st/10.1.3/appsutil/jdk/jre/classes]
[100112_105234223][][EXCEPTION] [DEBUG] [java.vendor]:[Sun Microsystems Inc.]
[100112_105234223][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[100112_105234223][][EXCEPTION] [DEBUG] [file.separator]:[]
[100112_105234223][][EXCEPTION] [DEBUG] [java.vendor.url.bug]:[http://java.sun.com/cgi-bin/bugreport.cgi]
[100112_105234223][][EXCEPTION] [DEBUG] [sun.io.unicode.encoding]:[UnicodeLittle]
[100112_105234223][][EXCEPTION] [DEBUG] [sun.cpu.endian]:[little]
[100112_105234223][][EXCEPTION] [DEBUG] [APPLOUT]:[out]
[100112_105234223][][EXCEPTION] [DEBUG] [sun.cpu.isalist]:[]
[10/1/12 10:52:35 AM] [UNEXPECTED] [157635:RT1296337] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:285)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
Caused by: oracle.xdo.parser.v2.XMLParseException: Expected ';'.
at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:337)
at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:305)
at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:289)
... 17 more
[10/1/12 10:52:35 AM] [157635:RT1296337] Completed post-processing actions for request 1296337.
[GC 8059K->6286K(8692K), 0.0076290 secs]
[Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor17]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor19]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor18]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor13]
6286K->3865K(8692K), 0.0446370 secs]
Please help great appriciation.
Thanks,
Sidharth.A semi colon character was expected. Error processing resource 'http://orappsus64.tsindia.in:8009/OA_CGI/FNDWRR.exe?temp_id...
<CP_PROJECT>IT/Quintiles/J&J COGNOS</CP_PROJECT>
----------------------------^
n-left:1em;text-indent:-2em"> <GL_MAIN_PERIOD>Jun-12</GL_MAIN_PERIOD>
<TOTAL_REVENUE>4026.14</TOTAL_REVENUE>
<GL_PERIOD>Jun-12</GL_PERIOD>
</G_TOTAL_REVENUE_CAT>
{code}
Your PL/SQL code doesn't produce a valid XML document.
In the XML grammar, "&" is a special character and must be escaped using the character entity "&amp;".
If you were using standard methods to build XML from Oracle (SQL/XML functions for instance), I'm sure you wouldn't have this error.
Please show us the PL/SQL code you're using to produce this XML output and we'll be able to help you further. -
How to create sine wave and step input using cwgraph in VB 6.0
hello..
i'm doing my master's project now. i'm stuck on how to create a sine wave and a step input using the cwgraph using VB 6.0. please help. thanks.hello..thank for the reply.
i'm having problem with my coding using cwgraph. can anyone help. everytime i do the full compile, there's error.but it can still can run, but can't convert to application form.for your info, i'm using RTscope and cwgraph to plot graph.the error is in the cwgraph coding.below are part of the coding with error. and can somebody tell me how to add cwgraph component in the VB? i try adding component, but it's not in the list of component,and i've browse for it already too.i'm doing the software at home, but i'can run it at my lab cause cwgraph component is not listed.please help.
Dim countTime As Integer, count1 As Integer, countFreq As Integer, countVolt As Integer
Private Sub cmdRun_Click()
If cmdRun.CausesValidation = True Then
cmdPause.CausesValidation = False
tmrOsc2.Enabled = True
tmrOsc3.Enabled = True
Else
cmdPause.CausesValidation = False
tmrOsc2.Enabled = False
tmrOsc3.Enabled = False
For count1 = 0 To 100
Data1(count1) = 0
Data2(count1) = 0
RT1.Value(1, count1) = 0
RT1.Value(2, count1) = 0
RT1.Refresh
CWGraph2.Plots(1).PlotY count1 ' THIS CODING HAS AN ERROR ...
CWGraph2.Plots(2).PlotY count1 ' THIS CODING HAS AN ERROR ...
Next count1
End If
End Sub -
Cannot view XML input using XSL style sheet. Please correct the error and..
Hi All,
Scenario XML to IDOC.
The interface determination decides whether to create IDOC X or IDOC Y based on a xml segment value.
I have an error in the SXMB_MONI:
<!-- Interface Determination
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem extracting values from the Payload: Check line 2 column 1 of the XML document</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
From the SXMB_MONI, the inbound message payload is truncated with an error:
- <ProductIdentification>
<GlobalProductIdentifier />
- <PartnerProductIdentification>
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The following tags were not closed: Pip3B12ShippingOrderConfirmation, ShippingOrder, ShipmentLineItem, isContainsHazardousMa...
"> <GlobalPartnerClassificationCode />
<ProprietaryProductIdentifier>000000000000101369</ProprietaryProductIdentifier>
</PartnerProductIdentification>
</ProductIdentification>
- <QuantityInformation>
- <confirmedQuantity>
<ProductQuantity>1.00</ProductQuantity>
</confirmedQuantity>
I've checked that the xml format is OK.
As a matter of fact, if I try to resend the xml file from directory, the message is processed correctly and the payload shows all the xml file.
Thanks.
Daniele
Edited by: Daniele*Verdone on Feb 1, 2010 11:22 AM
Edited by: Daniele*Verdone on Feb 1, 2010 11:23 AMHi Suraj,
That option is not available in FTP mode..
This option is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.
Yes, you're right !!
Are you sure that the message is not getting picked in half-way
Now, at this time, I can't see the XML data in the CC monitoring because the tool shows only the recent polling execute in the last 10 minutes. If the error recurs, I will check the payload of CC.
How can I solve the problem with reading incomplete file (FTP mode)?
...Meanwhile I will try with Full cache refresh.
Thanks
Daniele -
Dear Sirs,
I try to do an authorization to my NW 7.3 Java instance through my Windows domain authorization.
I done:
1) Create connection to LDAP-server and tested it.
2) Add windows domain certificate to TrustedCAs
3) Configure SPnego
Now, I can to login in my NW7.3 Java instance with my windows password, but however I must to input password when I open NW7.3 Java homepage.
Is it possible to login into the Java instance without password's input, using my windows workstation login/password?
What I have to do for that?
I use Windows XP on my workstation and IE 8.0.6 & Chrome 38.0.2125.
Best regards,
Alexey LugovskoyPlease check
Using Kerberos Authentication on SAP NetWeaver AS Java - User Authentication and Single Sign-On - SAP Library (NW7.3)
Using Kerberos Authentication for Single Sign-On - User Authentication and Single Sign-On - SAP Library (NW7.0) -
I connected my iPod Touch to a stereo system phono input using a cable with stereo jacks (red and white) on one end and that plugs into the iPod's headphone jack. The problem is that the sound is extremely muffled and bass-heavy, with little treble. I have to turn the bass control on the stereo receiver to pratically zero in order for the sound coming through the stereo to be acceptable. Is there a setting on either the iPod or the stereo that I need to change in order to fix this?
The phono input is for a phonograph. The iPod does headphne output is not that same as a phongraph output. Does th stero have an AUX input? That should be compatible.
-
Hi there,
This time I had strange messages while implementing CCA retractor and found following -
Error - You have no authorisation to change planning of Cost center DE1010511.
When I debugged found that below function module was throwing errors.
BAPI_COSTACTPLN_CHECKPRIMCOST
Does this mean that I dont have access to this cost center or its the ALEREMOTE user?
Anybody has an idea on this.?
regards
GRai
Edited by: G Rai on Jul 2, 2008 10:20 AMHi Rai,
Your RFC connection user Id does not have the authorisation for the cost center planning in the target system. If you give the necessary authorisation, it should work.
Regards,
Mike -
Using CCA Stub to Launch an Executable (For Non-Admins)
Hi,
Has anyone successfully launched a qualified\digitally signed executable using CCA Stub (When the logged User is Non-Administrator) ?
I have followed all the instructions to create a signed executable using our internal CA but CCA Stub is unable to launch the executable.
I then tried with a Microsoft Signed executable (To Rule out any error with our CA) but still the same result.
The only message that comes up is "Cisco Clean Access Agent stub failed to launch. <executable name>".
If I login as Administrator then the launch works fine but ofcourse this launch is not using the CCA Stub since logged User is Admin.
Thanks,
NamanI did not used a signed version of the executable and it's working fine. The only thing I can say though is make sure you are using the agent version right from the CAS (when you go through the web NAC authentication portal). Don't use the agent version from Cisco.com "Download Software" section because the exec il altered by the CAS. Use the one from the CAS.
Email from Cisco TAC:
============
Dominic,
Can you please tell me where the agent is being downloaded from? To work with the stub, it should be downloaded from the CAS, and not from cisco.com. This is because the agent downloaded from the CAS will have certain necessary site specific information.
Regards,
================
My two cents... -
General question: How to execute a batch input using different user name?
Hi everyone,
I would be very grateful if someone could tell me how to execute a batch input from source code using a differente username so the batch input is executed with different permissions.
For example, I log on with:
Username: A
, but I'd like to execute a batch input using the rights and permissions of user B.
Thanks in advance and best regards.
Ben.If you are calling the BDC in a program, create a job to run the program and specify the user you want each program to run under.
-
Hi All,
I am new to BPS and and am trying to set up the functionality for Retraction of data from SEM to R/3.
But when I go to the transaction (as mentioned in SAP Help)
Business Analytics -> Financial Analytics -> Cost Center Planning -> Cost Center Planning Administration,
I am not able to find the same.
I am working on SEM-BW 4.0 and BI_CONT 3.5, is the same transaction replaced with the one mentioned below here
Business Analytics -> Financial Analytics -> Cost Center Planning -> Customizing -> Settings in the Planning Environment
Moreover if I try to go to Settings in the Planning Environment, it gives me the error message as below:
Planning profile 4EXPPL01 does not exist
Message no. UPC_FW050
Can anybody suggest what am I missing. Thanks for your help in advance
AnuragHi,
I could activate the Content using the option that you had suggested, but am still stuck up with the Retractor setup.
I have done the steps as mentioned in SAP Help, but have not been able to retract data into R/3.
Below are the steps that I did and the problem :
1. Select one of the existing planning levels the selection of which contains data that you want to transfer back into the operational system, or create a suitable planning level.
2. Create a planning function of the type exit in the context of the planning level you selected.
3. Enter the names of the function modules in the fields intended for this:
Function module = UPR_COST_PLAN_EXEC
FM initialization = UPR_COST_PLAN_INIT
4. Make the assignments of parameters to data elements under Parameter Exit Functions:
5. In the list of fields to be changed, selected the following characteristics:
Cost center (0COSTCENTER)
Cost element (0COSTELMNT)
6. Create a parameter group for the planning function.
7. In the parameter group, entered the parameters created in the context of the function.
8. To start the retraction, select a package of the planning level and then execute the function with the parameter group.
Once I execute the package I get the following message
27 data records were read, 0 of them were changed, 0 generated
Message no. UPC224
Having done the above, I am not clear
what are the steps to be executed subsequent to this, and if I need to create the sender structure where and how I could create the same.
Moreover once the data is retracted into R/3 is it visible in transaction directly in KP06/KP07 or do I need to view the same in some other transaction/table or is there some processing step involved there also.
Looking forward to your suggestions
Regards
Anurag -
A list of inputs using netui tags
Hi all,
we have a family of netui problems which occur quite frequently.
The main problem is: what to do when we have a list of items (we don't
now how many), and we want to display them, and get some input from the
user.
1. The simplest form, when the user only has to select one, is ok: we
create a list of netui:anchor -s, with parameters, or we use a
netui:select (but even in this case we don't know what to do if the name
and the key of the items are different).
2. The user should choose more then one item.
a) We tried to use netui:select multiple=true. It renders fine, but we
can't get the results properly. If the user selects only one item,
it's ok, we can get it with a String field in the actionform. But if the
user selects more items, then we can't catch them.
We tried with String and List fields, but none of them worked (they
contained null).
b)It is more complicated, if we also want to display some attributes of
the items, like:
<checkBox> name1 description1 other attribute1
<checkBox> name2 description2 other attribute1
<checkBox> name3 description3 other attribute1
3. The user should enter some text or number for each item
e.g. (quite similar to 2.b)
name1 description1 <input type='text'/>
name2 description2 <input type='text'/>
name3 description3 <input type='text'/>
For 2.b) and 3) we have a workaround: we don't use netui:checbox or
netui:textfield, but manually construct input boxes. The names of the
boxes are the same that would be created by netui tags (e.g.
{actionForm.input[1]}), so when the user submits the form the framework
thinks that they were normal netui stuff and fills the actionForm with
their data.
4. The user can create a list on the fly, so he/she can even add more
elements to the list. We can do it with a submit per new item method,
but it would be better if could do it on the client side, and the user
would click on submit only when he finished editing. e.g.:
we want discounts in a tiered fashion: when the user buys at least 10
pieces of a product, he gets 10%, more then 100 means 15%, and more then
1000 means 20%. But it shouldn't be a fixed list, the administrator
should be able to create as many ranges as he wants. It looks like this:
Limit Discount
<input1_L> <input1_D>
<input2_L> <input2_D>
<add more button>
On the client side we can create the input boxes dynamically, with
proper names, so the system will know which field(s) of the actionform
we try to set. The problem is that when he submits the form, we get
IndexOutOfBoundsException, since the field of the actionForm doesn't
contain enough space for the items. Of course, we can initialize the
field in the reset() method of the actionform, but at this time we don't
know how many elements will it store.
We checked the docs, samples, and the bea newsgroups, but couldn't find
solutions to these questions (We have seen some similar questions in the
newsgroups, so it seems other people also have some of these problems).
I hope I described them clearly and you will be able to find ways to
solve (at least some of ) them.
Thanks in advance,
donHi all,
we have a family of netui problems which occur quite frequently.
The main problem is: what to do when we have a list of items (we don't
now how many), and we want to display them, and get some input from the
user.
1. The simplest form, when the user only has to select one, is ok: we
create a list of netui:anchor -s, with parameters, or we use a
netui:select (but even in this case we don't know what to do if the name
and the key of the items are different).
2. The user should choose more then one item.
a) We tried to use netui:select multiple=true. It renders fine, but we
can't get the results properly. If the user selects only one item,
it's ok, we can get it with a String field in the actionform. But if the
user selects more items, then we can't catch them.
We tried with String and List fields, but none of them worked (they
contained null).
b)It is more complicated, if we also want to display some attributes of
the items, like:
<checkBox> name1 description1 other attribute1
<checkBox> name2 description2 other attribute1
<checkBox> name3 description3 other attribute1
3. The user should enter some text or number for each item
e.g. (quite similar to 2.b)
name1 description1 <input type='text'/>
name2 description2 <input type='text'/>
name3 description3 <input type='text'/>
For 2.b) and 3) we have a workaround: we don't use netui:checbox or
netui:textfield, but manually construct input boxes. The names of the
boxes are the same that would be created by netui tags (e.g.
{actionForm.input[1]}), so when the user submits the form the framework
thinks that they were normal netui stuff and fills the actionForm with
their data.
4. The user can create a list on the fly, so he/she can even add more
elements to the list. We can do it with a submit per new item method,
but it would be better if could do it on the client side, and the user
would click on submit only when he finished editing. e.g.:
we want discounts in a tiered fashion: when the user buys at least 10
pieces of a product, he gets 10%, more then 100 means 15%, and more then
1000 means 20%. But it shouldn't be a fixed list, the administrator
should be able to create as many ranges as he wants. It looks like this:
Limit Discount
<input1_L> <input1_D>
<input2_L> <input2_D>
<add more button>
On the client side we can create the input boxes dynamically, with
proper names, so the system will know which field(s) of the actionform
we try to set. The problem is that when he submits the form, we get
IndexOutOfBoundsException, since the field of the actionForm doesn't
contain enough space for the items. Of course, we can initialize the
field in the reset() method of the actionform, but at this time we don't
know how many elements will it store.
We checked the docs, samples, and the bea newsgroups, but couldn't find
solutions to these questions (We have seen some similar questions in the
newsgroups, so it seems other people also have some of these problems).
I hope I described them clearly and you will be able to find ways to
solve (at least some of ) them.
Thanks in advance,
don -
Chinese input using mac trackpad is not working in firefox 18
i was trying to use my mac trackpad to input chinese on the web page and found out it is not working ... i switched to use firefox recently from safari which is working fine with input chinese using mac trackpad ... i am using version 18 and search the support and found out it worked in firefox 16 and not working in version 17 & 18 ... to my surprise that how could it worked in version 16 and not working in version 17 & 18 ... how could you removed the function away with the updated version? ... i thought you will have more efforts to improve the functions rather to remove functions in an open source programming approach ... i do not know if there is any person responsible to put this function back to firefox in the coming update?...
can any person provide any comment on this issue? ... i hope this could be resolved asap...
please advise...
cheers,cor-el,
in firefox 18, there is NO options tab under tools tab...
in firefox 18, under tools tab, there are only web search, downloads, add-ons, set up sync, web developer, page info, start private browsing, clear recent history, adblock plus...
i have searched around and could not find the option for "Use hardware acceleration when available"...
please advise...
cheers, -
Help with 2D array input using a text file
I'm writing a JAva program using BlueJ, which requires me to read info from a text file and put them into an 2D array. I got this error msg and I couldn't gifure out how to fix it. Please help me. Thanks a lot. The program is due tomorrow, please help.
Error message:
NoSuchElementException:
null(in Java.util.StringTokenizer)
Here's the program with the line where the problem is highlighted
import java.io.*;
import java.util.StringTokenizer;
public class ***
// Reads students' test scores from a file and calculate their final grade
public static void main (String[] args) throws IOException
String file1 = "C:/Temp/scores.txt";
int[][] input = new int[25][5];
StringTokenizer tokenizer;
String line;
FileReader fr = new FileReader (file1);
BufferedReader inFile = new BufferedReader (fr);
line = inFile.readLine();
tokenizer = new StringTokenizer (line);
for (int row = 0; row < 25; row++)
for (int col = 0; col < 5; col++)
input[row][col] = Integer.parseInt(tokenizer.nextToken()); --> porblem
This is what the text file looks like:
1 74 85 98
2 97 76 92
3 87 86 77
4 73 85 93
5 99 99 83
6 82 84 95
7 78 83 91
8 84 79 84
9 83 77 90
10 75 78 87
11 98 79 92
12 70 73 95
13 69 80 88
14 81 77 93
15 86 72 80
16 70 76 89
17 71 71 96
18 97 81 89
19 82 90 96
20 95 85 95
21 91 82 88
22 72 94 94Try this code..(I've tested this code in my machine and it works fine)
try {
FileReader fileReader = new FileReader("Z:\\fileInput.txt");
BufferedReader reader = new BufferedReader(fileReader);
int[][] fileData = new int[22][4];
StringTokenizer tokenizer = null;
String line = reader.readLine();
int rowCount = 0;
while(line != null) {
tokenizer = new StringTokenizer(line, " ");
int columnCount = 0;
while(tokenizer.hasMoreTokens()) {
fileData[rowCount][columnCount] = Integer.valueOf(tokenizer.nextToken()).intValue();
columnCount++;
line = reader.readLine();
rowCount++;
fileReader.close();
System.out.println("Done");
} catch (FileNotFoundException fnfe) {
System.out.println("File not found " + fnfe);
} catch (IOException ioe) {
System.out.println("IO Exception " + ioe);
The problem with your code is that you should first check whether there are any tokens before doing nextToken().
-Amit
Maybe you are looking for
-
Storage location field missed in (migo) details data ,where tab
Hi I am try ing for free goods I created new document type (copy from subcont document type..) and create new number range for this doc type and assign to this this document type and assign item category L to this new document type i defined account
-
Problem viewing locally registered portlets
Hi, Over the last few days, we have ben facing problems accesing locally registered Providers. On trying to view a portlet, Internal Server Error 500 pops up on each portlet. The application log is as: 06/11/01 07:02:39 portal: id=86473141267,1 Inval
-
Integration Builder in German, not English
We have three different XI installations running, all 3.0 SP16. In one of these installation, the Integration Builder is always in German instead of English. All language settings are set to EN. The other two installations don't behave like this and
-
I have set up as follows - ONE disk at 1 TB as the main disk for cpture rendering etc etc. On regular intervals i copy that disk in toto to another 1 tb disk rather than mirror them ( i have had lousy experience with mirrored disks - ie corruption be
-
Im in the middle of a rather large migration and a few users are see the below error when trying to log in to OWA: X-OWA-Error: SDServerErr;Microsoft.Exchange.Data.Storage.StoragePermanentExceptionI cant find much on this error other than the enable