Retrieving old hard drive data

I have a 10+ year old hard drive that has...God knows what on it. I'd like to get the data off and don't know how to go about it. Questions:
a) is it possible the data is still retrievable?
b) how do i get at it?
The drive is an old APS that I used with my original Powerbook 160. I have no idea what the input output jacks are but they're huge.
Any ideas? Thanks.

It's probably a 3 1/2" hard drive inside a SCSI enclosure. You'll need to purchase an external HD enclosure for either USB or firewire. Firewire is faster. Disassemble the APS, remove the drive, and remount it in a new external case.
Your data should be intact but you'll probably need Classic/OS9 installed on your Macbook to do anything with it. OSX will see the filesystem and the files just fine.
Imac Flatpanel, Beige G3, Wallstreet Powerbook     OS 10.3.9 (iMac), OS 9.2 (Wallstreet), OS 9.1 (Beige G3)

Similar Messages

  • Old Hard Drive Data Recovery

    I need to insatall a Western Digital HDD with Moldex/SATA connections from my old PC into my HP P7-1204 temporarily to recover data. The HP HDD connections are proprietary (of course). Any suggestions?
    This question was solved.
    View Solution.

    vermin,
    This adapter should work
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Best program for mac to retrieve info off an old Hard drive?

    What is the best program for mac to retrieve info off an old Hard drive? I have the raw Hard drive in an enclosure and plugged in, but it will not read files...any past experiences? I have been looking at Data Rescue 4 and Recuva thru wondershare. Anything helps.
    thanx

    Volume is too much for disk utility

  • Moving Data from old hard drive to new hard drive

    I'm posting this question in this category , I hope it's the right place.  Here's my situation and general information. I have a Toshiba L35 S2161 laptop, it's about 5 yrs old, running WinXP Service Pack 3.   just got the blue screen, wouldn't boot, tried everything and I only have the factory provided "recovery" disc that will wipe my drive and lose all my data if I use it.  I hadn't been doing regular backups, so I want to save as much if not all of my data as I can.  I don't want to spend time here going over everything I've tried (boot disc like Knoppix, etc) which didn't work, just need to get to the bottom line and make sure I'm doing the next steps correctly.
    Here's my plan:
    l.  Remove old hard drive from laptop
    2.  purchase new hard drive  - I've been told any drive will work, it doesn't have to be designed for a Toshiba.  I've been looking at best prices, etc. mainly Western Digital.  I may purchase a larger drive to at least get more memory , although I really didn't have that much on my old drive, but had a lot of apparent memory-related problems, freezes, etc.
    3.  Install new blank drive into laptop, using the Toshiba factory recovery disc to reformat the disc and get it ready to receive the data.
    4.  Insert the recovery disc into the drive, turn on the computer and HOPE that it boots it up and installs a fresh install on the new drive.  Not sure what the screen willl show at this point - I've never installed a new drive in a laptop, so will be somewhat nervous at this point to see what happens.
    5.  Assuming the new drive is recognized by the recovery disc and installs a clean version of WIN XP (I'm assuming that's what's on the recovery disc that came with my computer, because it had WIN XP pre-installed), I will now be ready to transfer data from the old drive.
    6.  This is the step I'm not sure what or how to do next.  I would like to clone my entire old drive onto the new drive but I'm afraid if I do that it might load damaged files that would mess up my new install.  I purchased a disc enclosure with a USB cable (haven't received it yet), and was going to use that somehow.  I presume I will plug it in and it will show up as an external drive and I can access that drive and transfer my priority files or data first and then try to transfer as much more as I can....
    I need further help and information about this last step...the critical data transfer method.  There are cloning kits that are plug and play and would transfer my entire system as it was before the blue screen, but again, I'm concerned about transferring everything onto a clean install and finding myself with a computer that won't boot again because it transferred a bad file.  Also, would it overwrite or interfere with the clean install on the new drive?   I'm stuck at this point....hopefully someone out there can walk me through this final step with the best option for transfer.  I'm trying to avoid purchasing pricey software like Acronis (which I looked at online and it seemed difficult to use, to figure out what to transfer). 
    My laptop is obviously out of warranty, being five years old, and I am not interested in taking it in to repair tech, I want to do this myself and I think I can with a few helpful tips.  Thanks for any help asap...

    Hi!
    The error message I received on the blue screen was "unmountable boot volume" which leads me to believe i have a corrupted MBR.  This fiasco happened when I turned off my computer when it was running a program (I know, bad thing to do).
    I'm waiting on a new hard drive with a 120 GB (my old drive was 80GB).  I was told not to go above 120 or I'd have partition problems. 
    The SATA drive enclosure powers up the old drive (I can hear the disc spinning) so the disc isn't dead.  If I''d have the full retail vesion of WinXP I would of course have used the recovery console, but I only had the toshiba recovery disc that came with my system.  Also, I couldn't burn a CD boot disc...didn't have access to another computer nor would a tech friend do it for me as he apparently made a disc for someone and their system crashed so I had no choice but to buy a new drive and try to transfer the data via the SATA external drive/usb cable.
    My big question now is:  Will the Toshiba recovery disc actually reformat my new drive?  Someone on another forum with a Toshiba laptop had purchased a new drive, used the recovery disc and the cd just went into a constant loop and never went into a full install.  I'm thinking that maybe on a new drive there isn't enough knowledge base there for the recovery disc to install and reformat a new disc.  That would be a bummer because then I'd have no choice but to purchase a retail version of WinXP which I was hoping not to have to do.  Thats' getting into some $$ when added to all the other thing I've tried to get this laptop up and running .  (A Knoppix live CD boot disc didn't work either).
    I don't know what service pack was on the old disc...possibly SP2, but if it was only SP1, I fear it's not going to have the ability to format a new disc.  The disc does have drivers, etc. but the question is, are they able to install the OS.  I was running XP3 when it crashed, so I know i would have to download that again.  I just want to get the darned system back up and running with my new drive and restore disc.  IF I can do that, then I'll try to transfer the data from the old drive via the external drive enclosure.
    I also decided against the clone....I was afraid I'd be cloning a bad disc or errors onto a new drive, and didnt' want to stress a possibly wonky drive even more than it possibly is. 
    So, that's where I'm at now!  Thanks so much for any further insight into this....something tells me the recovery disc isn't going to format my new drive but fingers crossed...more thoughts/feedback appreciated!

  • How can i recover my data from an old hard drive after replacing it?

    How can I recover my data from an old hard drive after replacing it?

    Internal or external hard drive? Was the drive still working before you replaced it?

  • I have new hard drive in macbook pro(08) and have SATA cable with external power source to old hard drive (10.5.8)via. USB port and newer drive(10.6.8) will not recognize older drive..Do I need to partition newer drive with older disk to recover data?

    I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8  connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08

    You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
    You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
    http://scsc-online.com
    They also sell a product named Phoenix that can do OS extraction  and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
    I would suggest the following:
    Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
    Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
    If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
    If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The  only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
    Disk Warrior can be found at:
    http://www.alsoft.com/diskwarrior/
    The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the  damage has already been done.
    Let us know what happens.

  • Transferring data from old hard drive to new computer

    The hard drive on my MacBook Pro went bad and had to be replaced.  I was told it would be simple to transfer its contents onto the new installed hard drive, but I have yet to figure it out.  Can anyone tell me what equipment I need and how to do this?  Any help  would be appreciated.

    Perhaps I'm missing something here, but if your old hard drive in fact failed, requiring its replacement, unless you have a separate backup, other than using a data recovery service, your data is gone.

  • New computer + old hard drive... will I lose my data???

    My old macbook is going to be replaced with the new core 2 duo macbook. I took out my hard drive so that when the new computer shows up at my door, I can pop in my old hard drive.
    The problem is, I didnt backup my data. When the new computer comes, will i have to reformat the olf hard drive and as a result lose all my data????
    help! I am worried....

    There are a couple of different ways this transfer could be handled.
    1. Backup all your data and files to a different hard drive. When your new MacBook arrives, copy your data from that drive manually. (This may not be an option since you don't have a working computer to backup from.)
    2. Put your current hard drive in an external case and use the Migration Assistant to copy the bits and pieces you choose to the new computer. Or manually drag and drop your files over. The Migration Assistant is normally used if you have an older Mac and you're upgrading and you want to copy all your files over to the new Mac (this can be done from an external hard drive and not just a working Mac). The assistant will ask you what you want to transfer over, users and their files, network settings and/or applications. You can pick and choose between those options and even pick and choose in between different users on the same hard drive (if you have more than one).
    3. Put your current hard drive into the new MacBook. It won't startup correctly, but you could then boot from your Mac OS X install disk that comes with the new MacBook, install Mac OS X as a simple "update" or an "archive and install". Obviously, you don't want to chosoe an "erase and install". And then continue to use your original drive in the new MacBook. This option is probably the most risky. While I've done something similar in the past, I haven't always had the best luck with an "update" over the top of a different build of Mac OS X. An "archive and install" will move your current System folder to a "previous" System folder and install a new System folder. You have the option to keep your user files and network settings if you choose to. Bear in mind, this path does not leave you with a backup of all your files in case something does go wrong and you must erase & install.
    -Doug

  • Computer died...now how can I retrieve keyword tags from my old hard drive?

    I got a new computer and installed Elements 9.0 on it.  I am retrieving the pics from my old hard drive just fine but I seem to have lost the majority of my old keyword tags.  Any help?  Thanks.

    If you didn't write the keyword tags to all the photos when your old computer was working, you can't get the tags back by simply retrieving the photos.
    You'll need to retrieve the entire catalog directory.  When you open that old catalog on your new computer, all your photos will be listed as "missing".  Use the Reconnect All Missing Files to connect them by browsing to their current location.
    Ken

  • When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact?

    My mac and I rely HEAVILY on the use of alias files and folders. The simple version of my question is: When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact?  These are not symlinks or symbolic links, they're all alias files and folders. 
    Is there any software out there that might help me with a solution?  Are there any tricks or tips you can give me to try?

    Use either Setup Assistant at first start, or Migration Assistant on subsequent occasions and all will be transferred intact. Given your wording I presume you are Unix savvy and will appreciate the problems that duplicate userids would cause, so of you use MA for the migration, make sure the target Mac has no userid equal to that on the source and you will be fine.
    SA does not have these issues since it runs before any user account is created, so it can simply copy over everything. But MA runs after the fact and only solves the issue partially by changing the UID in the user directory, leading to permission problems.

  • Accessing data from old hard drive connected to HP Pavillion 500-242ea

    Recently i purchased HP Pavillion 500-242ea ( OS Windows 8.1) as my old pc died.I connected the old hard drive via Usb adaptor kit.The old drive shows up in device manager and file explorer and disk management as F drive but does not show volume. I know the old drive is not full and the drive is working as i can put discs in and they load up.When i click on the old drive-F drive- in file explorer 'Please insert disc' message pops up.Any one know how to access data from old drive which has IDE cable.
    Please help need to copy imporatant files from old drive.
    Thank you
    This question was solved.
    View Solution.

    Just had to ask, do you know the difference between hard drive and CD/DVD drive?  Don't get angry, read this.
    You said " I know the old drive .......... is working as i can put discs in and they load up.When i click on the old drive-F drive- in file explorer 'Please insert disc' message pops up.'
    All that implies a CD/DVD drive. You can not put a disc into a hard drive.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Apple changed my system password when I took my computer in for a hard drive data transfer. There password hint reads "Password was changed to "apple"". I tried apple, "apple", and my old password which is written down in my file. How do I change it?

    Apple changed my password when I took my computer into to have data transferred from an old hard drive. Their password hint is (Password was changed to "apple" ) I tried apple, "apple, and my old password which written down in a file. How do I establish a new password?

    Restart from a Mac OS X DVD with the Option key held down at startup and use the DVD's Reset Password utility.
    (59432)

  • Have Old Hard drive and want to move old data onto new hard drive in imac.

    I am trying to get my files off of an old hard drive. I have it hooked up through a sata drive. I am able to access all the programs but for whatever reason I am unable to access any of the files, i.e- 1,00's of pictures, videos, music, and documents. Is there something else I need to do in order to get the files, or is it possible that all the programs could still be on it but the files are just missing? In the current Sata it only has two plugs but on my hard drive it looks like there is another place to plug something in.

    Hello again Shadow,
    The way I do this is to:
    1) Install your new hard drive into your iBook
    2) Get your iBook reassembeled
    3) Place your old hard drive in your firewire enclosure
    4) Insert your install DVD into your iBook and restart with the C key held down. When the installer launches, select your language in the first pane, click 'continue' and in the upper dropdown menu in the next page select Utilities > Disk Utility. After DU is open, select your hard drive from the list of volumes on the left (the very top one), and then click the 'Partition' tab to the right. Then select 1 partition (normal) and make sure that you have 'Mac OS Extended (journled)' selected in the lower section. Then click 'partition'
    5)Quit disc utility, which brings you back to the installer. continue with your installation of OS X. In one of the first steps you will see a button on the lower left which says 'options' click on that and make sure that the option 'Installs OS X for the first time' is selected. It will normally be selected by default with a new drive.
    6) After the installation, the Migration Assistant will ask if you would like to transfer your information from another mac. click yes then follow the instructions. but instead of using another mac, connect a firewire cable from your enclosure with your old hard drive installed. The installer will think that this is another mac and will transfer all of your account information and user files (everything!)from your old drive to your iBook's new drive. Just diconnect when it says to and complete the installation sequence.
    You're done!
    Check back again if anything is unclear.
    Randy
    Message was edited by: DesertSage

  • How do I transfer applications & data from my old hard-drive to my new one?

    My old hard drive started to crash, it was on it's way out and making funny noises. I have brought a new hard drive and connected it to the same leeds as the old one. I have put the opperating system on to the new hard drive and it is all up and running..... but.
    I want to transfer all my old applications like garage sale and limewire without having to pay for them again and transfer all my music and photos from the old hard drive to the new.
    So:
    1: How do i get the old hard drive out of the position it's in it seems glued in and i can't see any screws?
    2: How do i connect both hard drives and transfer everything from the old to the new? Do i need to buy another set of leeds or should they be in the computer
    Your help would be most appreciated.....
    power mac G4 466MHz   Mac OS X (10.3.9)  

    Hi
    You should be able to have both drives installed at the same time in the rear U shaped bracket. One needs to be mounted in the bottom of the bracket, have it's jumpers set to master and be connected to the end connector of the ribbon cable. The other needs to mounted above it, have it's jumpers set to slave and be connected to the middle connector of the ribbon cable. The computer should have the leads to do this, i.e. one ribbon cable with two connectors and two molex power connectors. With both drives installed, you can then drag your music and photos etc from the old to the new. You could try dragging the applications, although if they install additional files elsewhere they'll need to be reinstalled from the original CDs or DVDs.
    The old drive may be screwed into the U shaped bracket from below. There should be a single screw which secures the bracket to the chassis at the front, although it may be hidden under the ribbon cable. If you unplug the ribbon cable and undo the single screw you can remove the bracket still containing the old drive, by sliding it forwards and lifting it up at the front. The screws securing the drive to the bracket can then be undone from beneath.

  • How can I restore my itunes data from an old hard drive?

    Hey guys I hope this isn't confusing... but! My motherboard on my computer died yesterday, and I had to buy another computer. I had 2 hard drives in my old computer and also an usb external drive that had all my music on it. Now here is the problem... I only had enough room in my new computer to add 1 extra drive so I put the bigger drive in, but that is not the drive that itunes was installed on. So I was going to download itunes but then realized I would not be able to get my settings back. So here is what I did. I installed the drive that itunes was on to another computer so I can access the hard drive.
    So my question is I guess, Is there a file that I can take off that old hard drive and copy it over or import it into my new itunes that was just installed so I don't have to resetup all my ipods ( I have 2 iphones 2 videos, and 1 touch) remember that all the music and video files are on the usb drive so I can just set itunes to look in that drive for the files. it is just the settings that I am looking to import.
    Thanks for any help

    It's your PC that needs to be authorized, not the iPods. If you didn't authorize your old PC before it crashed, you have lost one of the 5 authroizations, but I wouldn't worry about it - once you reach 5 authroizations you can deauthorize all, once per year.
    Article onthat: http://support.apple.com/kb/HT1420
    +will this also keep my info for all downloads+
    I don't understand this part of your question.

Maybe you are looking for