Return delivery error while displaying the confirmation in EBP

Hi All,
I face an error in EBP when I try to return delivery after confirmation of PO. Just to explain you all in detail-
I created a shopping cart, ordered it and then confirmed it using Create Confirmation. Now when i try to make <b>Return Delivery</b>, it gives me an error saying, No return delivery can be entered for confirmation, followed by another error- Interface data contains errors.
Pls help!!!!!!!!!!
Thanks in advance.
Regards,
Swapna

Hi Yann,
As per your suggestion, I tried to do a return delivery through backend with PO quantity same as delivered quantity. I am able to do a return delivery successfully. So the error seem to be in EBP,, is it?
While debugging BBPCF02, I noticed that it calls a function module -
BBP_CF_ASSIGNMENT_BACKEND.
In this function module, it calls a routine tolerance_check_backend which checks for the below code
lv_open_tol_quan = is_tol_check-quantity
( 1 + is_tol_check-overdel_tol / 100 )
                     - is_tol_check-deliv_qty.
If this field lv_open_tol_quan is 0, it throws the error.
Now in backend, where the purchase order gets created, i checked for over delivery tol,,its 0.
so if both the qtys are same, I will alwz get the same error.
Can you please help me to understand this???
Thanks in advance.
Regards,
Swapna
and since

Similar Messages

  • Error while deleting the confirmation- Reason has to be entered for 102

    Hi,
    When i try to delete the confirmation for Goods, an error -"A reason has to be entered for movement type 102" is occuring. I have maintained the reason for rejection in the document tab at the line item level while deleting the confirmation.The reason for movement field is mandatory in R/3 system for movement type 102. I have maintained this reason for rejection that has maintained in the R/3 system in the SRM config and able to select that during deletion of confirmation, but still i am getting this error. Please suggest.
    Regards
    GGL

    sorry for the very late reply..
    Note 1345896 - Error due to reason for movement when deleting the GR in EBP
    When we try to delete a goods confirmation with the Reason for Rejection text in SRM, we get the error "A reason has to be entered for movement type 102" (M7 325) thrown from the backend R/3 system.
    Other terms
    M7 325, RREJ, Reason for Rejection, MOVE_REAS, c_subtype_ca, LBBP_CFF60, FORM mapping_gr_for_backend.
    Reason and Prerequisites
    This is caused by a program error
    it helps aothers too

  • Error while doing the confirmation by COR6N

    Hello Friends,
    While doing the confirmation by  T.C COR6N,in that screen i gave the process order no. and the phase no. and the posting date only and pressed enter, after that system thrown the error message "  Incorrect Resource entered " , Message no. S1333.
    Diagnosis
    This message is dynamically created, no more information possible.
    Actually by default from the process order system takes the resource.Here in COR6N screen i haven't given the resource than also system is giving the error message.
    Thanking you guys in advance.

    PLease check in the master data, Whether you have mentioned the resource..
    Foe Example, In discrete manufacturing, In the routing , we will give the workcenter which will be copied to the production order...
    Similarly please check and revert..
    karthick

  • Getting an unexpected error while displaying the bound HtmlOutputText

    I am getting this unexpected error when I am trying to display the HtmlOutputText which is bound to a backing bean HtmlOutputText component.
    Error:
    java.lang.IllegalStateException: strict servlet API: cannot call getOutputStream() after getWriter()
         at weblogic.servlet.internal.ServletResponseImpl.getOutputStream(ServletResponseImpl.java:253)
         at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:176)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3151)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    The JSP Page is :
    <%@ page language="java" contentType="text/html; charset=ISO-8859-1"
        pageEncoding="ISO-8859-1"%>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <title>Two Beans</title>
    </head>
         <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
        <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
    <body>
    <f:view>
    <h:form id="TwoBeansForm">
         <h:selectOneMenu id="Dropdown" value="#{hlb.cb.selVal}">
              <f:selectItems value="#{RgsRequestBean.compLookup.competencyAreaMap}"/>
         </h:selectOneMenu>
         <h:commandButton id="TestButton" value="Display" action="#{hlb.display}"/>
         <h:outputText id="SelectedValue" binding="#{hlb.text}"/>
    </h:form>
    </f:view>
    </body>
    </html>The backing bean code is:
    package trial;
    import javax.faces.component.html.HtmlOutputText;
    public class HighLevelBean {
         private ChildBean cb;
         private HtmlOutputText text;
         public HighLevelBean(){
              cb=new ChildBean();
         public ChildBean getCb() {
              return cb;
         public void setCb(ChildBean cb) {
              this.cb = cb;
         public HtmlOutputText getText() {
              return text;
         public void setText(HtmlOutputText text) {
              this.text = text;
         public String display(){
              text=new HtmlOutputText();
              text.setValue(cb.getSelVal());
                return "goback@twobeans";
    }The goback@twobeans string provides the navigation to the same jsp page.
    Childbean just have one String member variable.
    The values in the drop down is getting populated but when I am trying to get the selected value to be displayed through the HtmlTextOutput the above error is thrown...

    Hi  ,
    For troubleshooting your issue, please take steps as below:
    1. Open web.config file of current web application
    2. Find the node that begins
    <trust level=
    3. Change the trust level from WSS_Minimal to
    WSS_Medium
    4. Save the file
    5. Drop to command prompt and execute : 
    iisreset
    If your issue persists, please provide detail error message of ULS log  to determine the exact cause of the error?
    For SharePoint 2010, by default, ULS log is at      
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Error while displaying the attached file

    Hi ,
    I am doing one task ,where I need to attach a TIFF file to the workitem .
    I am getting desired output while attaching the file from presentation server but While doing from application server , I am able to attach the file to corrseponding workitem but when i tried to display it ,it gives an error <b>" Operation could not be performed"</b>
    So could you please help me out how to do this ?
    I am using a FM "SCMS_UPLOAD" for uploading file from application server .
    Is there any other way to upload or read the file .
    Thanks

    Hi,
    Use the other FM's
    'SO_OBJECT_UPLOAD'
    OR
    If you are trying to read the file from an SAP Application server,
    1) "OPEN DATASET" to open the file,
    2) "READ DATASET" to read the data into an internal table
    3) "CLOSE DATASET".
    OR
    *   Retrieve Data file from Application server(Upload from Unix)
    DATA: i_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.
        OPEN DATASET i_file FOR INPUT IN TEXT MODE.
        IF sy-subrc NE 0.
          MESSAGE e999(za) WITH 'Error opening file' i_file.
        ENDIF.
        DO.
    *     Reads each line of file individually
          READ DATASET i_file INTO wa_datatab.
    *     Perform processing here
        ENDDO.
    Regards,
    Nandha

  • Run time error while displaying the list of km folders

    hi
    i am trying to display the list of contents in the km folder using km api but the application is displaing an runtime error
    package com.sap.test;
    error in init method component
    any body know the solution for this problem .
    thanks

    hi there
    public class kmportalcomp extends AbstractPortalComponent
              public String outtxt;
              int depth;
              int rowid = 0;
              int counter = 0;
         public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
              IUserContext userCtx =request.getUser();
              IResourceFactory factory;
              IPortalComponentContext compContext = request.getComponentContext();
              IPortalComponentProfile profile = compContext.getProfile();
              try {IUser serviceUser = WPUMFactory.getServiceUserFactory().getServiceUser("ccadmin_service");
                   String webpath = request.getWebResourcePath();
                   IResourceContext resourceContext = new ResourceContext(serviceUser);
                   response.write(webpath);
                   String fpath;
                   fpath = profile.getProperty("path").trim();
                   depth = Integer.valueOf(profile.getProperty("depth").trim()).intValue();
                   RID rid = RID.getRID(fpath);
                   ICollection folder = (ICollection)ResourceFactory.getInstance().getResource(rid, resourceContext);
                   IResourceList  fileList = folder.getChildren();
                   response.write("d.add(0,-1,'"folder.getName()"');\r\n");
                   rowid = 0;
                   scan_km(response, fileList,0);
                   response.write("document.write(d);\r\n");
                    response.write("//--></script>");
                    response.write("</div>");
                } catch (Exception e) {
                    response.write("Error Occured<br>");
                    response.write(e.toString());
              public void scan_km(IPortalComponentResponse response,IResourceList list,int level) {
                   int currentrowid = rowid;
                   if (level>depth&&depth!=0) {
                         return ;
                     String rid = " ";
                     IResourceList tmpreslist;
                     ICollection tmpcollection;
                     level++;
                     for (int i = 0; i < list.size(); i++) {
                         IResource tmpres = list.get(i);
                         try {
                             if (tmpres.isCollection() && tmpres.getLinkType() == LinkType.NONE ) {
                                  //&& tmpres.getLinkType() == LinkType.NONE
                                  tmpcollection = (ICollection) tmpres;
                                tmpreslist = tmpcollection.getChildren();
                                if (tmpreslist.size()>0) {
                                    rowid++;
                                    response.write("d.add("rowid","currentrowid",'");
                                    response.write(tmpres.getName());
                                    response.write("','');\r\n");
                                    scan_km(response,tmpreslist,level);
                             else {
                                rowid++;
                                String dispname;
                                dispname = tmpres.getDisplayName();
                                if (dispname==null||dispname.equals(""))
                                    dispname = tmpres.getName();
                                rid = "/irj/go/km/docs"+tmpres.getAccessRID();
                                response.write("d.add("rowid","currentrowid",'"dispname"','"rid"');\r\n");
                         } catch (Exception ex) {
    the error is am getting is
    com.sapportals.wcm.repository.enum.LinkType and com.sapportals.wcm.repository.enums.LinkType     kmportalappproject/src.core/com/sap/test     kmportalcomp.java     
    thanks

  • Direct store Delivery : Error while posting the customer payment in FSR

    Dear Experts,
    We are in the process of DSD implementation at customer place. We are facing the following isuse , your help will be highly appriciated
    This is with respect to an error we are facing when the collection clearing
    process iin final settlement Run.
    The details of the same are as follows:
    Transaction code: /DSD/SL_COCKPIT
    Area: Payment Posting
    Error: Balancing field "Profit Center" in line item 001 not filled
    The customer line item of the invoice being cleared has been assigned
    the profit center as part of the document splitting at the stage of
    invoicing to the customer.
    The bank account/cash account to be posted at the time of clearing in
    DSD settlement process is not capable of being provided as input nor
    available for configuration in the DSD section in IMG.
    regards
    Neleesh

    Hi
    Did you find the solution to this error. We are also facing the same issue while posting payment against the payment method 'Check'.
    Kindly help please.
    Regards
    Noman Rasheed

  • Error while displaying the document

    Dear experts,
    We have uploaded a document through CV01N to DMS and attached it to equipment master.we are able to see Excel,Word,PDF documents,but throwing an error when it comes to JPG , ZTF , and IMG types. The error is http//172.9.48.1090\content server\content serve could not be accessed.
    Please guide me to the solution.
    Thanks in advance.
    Venu.

    Hi Venu,
    From ypour details ,it seems that this is not a problem of content server bcoz if content sevrer is not responding in that case it will not open all type of files .doc etc also.
    You need to defien mime types properly in DC30 for jpg ,ztf etc files whichever you want to see.
    I hope this will resolve the query.
    Regards,
    Ravindra

  • Error while executing the report to display on the web in BI 7.0?

    Hi All,
    In BI 7.0, Getting Error while executing the report to display on the web?
    The error message displayed is:
    " Network Access Message : The website cannot be found ".
    Source: DNS error.
    Why this error is coming.
    Wht needs to be done.
    Thanks in Advance.

    Hi Kishore,
    All the configurations are in proper shape.
    We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
    Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
    EP is not configured over here. Is that causing the problem.
    Thansk in Advance.

  • Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")

    I activated all 0* objects in BTMP  and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
    Error messages :
    Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
    ERROR: Command type SWITCH_AXES of object not recognized
    ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
    So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
    Error messages :
    Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.     
    Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.          
    Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)          
    Query  does not exist in the BI System (Object QU )
    Cannot instantiate data provider
    I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
    Command type SWITCH_AXES of object  not recognized
    Command type SWITCH_AXES of object  not recognized
    Command type SWITCH_AXES of object  not recognized
    Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
    Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
    Command SWITCH_AXES cannot be located in parameter ACTION
    Command SWITCH_AXES cannot be located in parameter ACTION
    Command SWITCH_AXES cannot be located in parameter ACTION
    Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
    Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    Invalid parameter value  for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    bi-Tag bi:item has unknown attribute key. Please check your spelling
    What could be the problem?

    hi,
      Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
    check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
    wht is the SP Level?
    Nagesh Ganisetti.

  • Travel Display Form: Error while determining the form function module

    Hi,
    In Travel Reqeust (ECC6/ESS) when i click the Display Form after raising the Travel Request it shows the error
    "Error while determining the form function module"
    Can anyone have idea on this?
    Regards,
    Boobalan

    Hi,
    This error was due to Not supported platforms of ADS (Adobe Document services)
    It was not supported on itanium64 bit processors.
    Please check where the ADS is supported in service.sap.com/pam
    You can use the ADS in the Non-Supported Server by linking it to Supported Platform Server using the SM59 link. This will make the ADS files to work.
    Please refer the ADS Config Doc for details.
    Hope you also solve this problem.
    Regards,
    Boobalan

  • Automatic Picking giving error while saving the Delivery

    Hi
    We have done the configuration for doing automatic picking while saving the delivery.
    Steps done are
    1. TCode V/38
    2. TCode OVLT  where we have changed the Time value form 3 to 4 for  Send Immediate
    3. TCode VP01SHP where all shipping points are maintained.
    we are getting the following error while saving the delivery.

    Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error".  Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
    G. Lakshmipathi

  • Error while loading the data from PSA to Data Target

    Hi to all,
         I'm spacing some error while loading the data to data target.
    Error :  Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
    Details:
    Requests (messages): Everything OK
    Extraction (messages): Everything OK
    Transfer (IDocs and TRFC): Errors occurred
          Request IDoc : Application document posted
          Info IDoc 2 : Application document posted
          Info IDoc 1 : Application document posted
          Info IDoc 4 : Application document posted
          Info IDoc 3 : Application document posted
          Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
    Processing (data packet): Errors occurred
          Update PSA ( 2462  Records posted ) : No errors
          Transfer Rules ( 2462  -> 2462  Records ) : No errors
          Update rules ( 2462  -> 2462  Records ) : No errors
          Update ( 0 new / 0 changed ) : Errors occurred
          Processing end : Errors occurred
    I'm totally new to this issue. please help to solve this error.
    Regards,
    Saran

    Hi,
    I think you are facing an invalid character issue.
    This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
    I will add the step by step procedure to edit PSA data and update into target (request based).
    In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
    Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
    Identifying incorrect records.
    System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
    1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
    2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
    3. Then you can go to PSA and filter using the incorrect records based on the particular field.
    4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
    If you want to confirm find the PSA table and search manually."
    Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
    Steps to resolve this
    1. Force the request to red in RSMO > Status tab.
    2. Delete the request from target.
    3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
    4.Edit the record
    5. Save PSA data.
    6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
    Refer how to Modify PSA Data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
    This should solve your problem for now.
    As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
    RSKC --> type ALL_CAPITAL --> F8 (Execute)
    OR
    Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
    Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
    Refer
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    /people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
    /people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
    http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
    For adding Other characters
    OSS note #173241 – “Allowed characters in the BW System”
    Thanks,
    JituK
    Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

  • Error while starting the SOA suite

    Hi,
    Im facing error while starting SOA suite, which I was doing earlier without error.
    Below is the error log.
    An unknown OPMN error has occured
    oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
         at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
         at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
    Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
         ... 6 more
    Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
         at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
         at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
         ... 6 more
    Exception caused by
    There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
    oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
         at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
         at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
         at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
         at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
    Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
         at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
         at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
         at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
         ... 6 more
    <?xml version='1.0' encoding='WINDOWS-1252'?>
    <response>
    <msg code="-82" text="Remote request with weak authentication.">
    </msg>
    <opmn id="DWH-34316-K2:6200" http-status="204" http-response="0 of 1 processes started.">
    <ias-instance id="soa.DWH-34316-K2.wipro.com">
    <ias-component id="default_group">
    <process-type id="home">
    <process-set id="default_group">
    <process id="943261457" pid="836" status="Stop" index="1" log="F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
    <msg code="-21" text="failed to start a managed process after the maximum retry limit">
    </msg>
    </process>
    </process-set>
    </process-type>
    </ias-component>
    </ias-instance>
    </opmn>
    </response>

    Hi,
    Below is the errror stated in opmn.log
    Thanks in advance
    07/10/18 10:04:15 [ons-internal] ONS server initiated
    07/10/18 10:04:15 [pm-internal] PM state directory exists: F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\states
    07/10/18 10:04:15 [pm-internal] OPMN server ready. Request handling enabled.
    07/10/18 10:04:21 [pm-requests] Request 5 Started. Command: /start
    07/10/18 10:04:21 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:0)
    07/10/18 10:04:21 [pm-process] Starting Process: default_group~home~default_group~1 (943261440:0)
    07/10/18 10:04:21 [pm-process] Starting Process: default_group~oc4j_soa~default_group~1 (943261441:0)
    07/10/18 10:04:24 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
    07/10/18 10:04:35 [pm-process] Process Alive: default_group~home~default_group~1 (943261440:3828)
    07/10/18 10:05:31 [pm-process] Process Alive: default_group~oc4j_soa~default_group~1 (943261441:5944)
    07/10/18 10:05:31 [pm-requests] Request 5 Completed. Command: /start
    07/10/18 10:53:45 [pm-requests] Request 58 Started. Command: /stop
    07/10/18 10:53:45 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
    07/10/18 10:53:45 [pm-process] Stopping Process: default_group~home~default_group~1 (943261440:3828)
    07/10/18 10:53:45 [pm-process] Stopping Process: default_group~oc4j_soa~default_group~1 (943261441:5944)
    07/10/18 10:53:49 [pm-process] Process Stopped: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
    07/10/18 10:53:53 [pm-process] Process Stopped: default_group~home~default_group~1 (943261440:3828)
    07/10/18 10:54:03 [pm-requests] Request 58 Completed. Command: /stop
    07/10/18 10:54:03 [pm-process] Process Stopped: default_group~oc4j_soa~default_group~1 (943261441:5944)
    07/10/18 10:54:04 [pm-requests] Request 6c Started. Command: /stop
    07/10/18 10:54:04 [pm-requests] Request 6c Completed. Command: /stop
    07/10/18 10:54:04 [pm-internal] OPMN server stopped. Request handling disabled.
    07/10/18 10:54:04 [pm-requests] Request 6d Started. Command: /shutdown
    07/10/18 10:54:04 [pm-requests] Request 6d Completed. Command: /shutdown
    07/10/18 10:54:04 [pm-scheduler] Pm/Ons confirm notification timeout
    07/10/18 10:54:05 [internal] Logging disabled
    07/10/18 10:54:16 [ons-internal] ONS server initiated
    07/10/18 10:54:16 [pm-internal] PM state directory exists: F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\states
    07/10/18 10:54:16 [pm-internal] OPMN server ready. Request handling enabled.
    07/10/18 10:54:22 [pm-requests] Request 5 Started. Command: /start
    07/10/18 10:54:22 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261442:0)
    07/10/18 10:54:22 [pm-process] Starting Process: default_group~home~default_group~1 (943261443:0)
    07/10/18 10:54:22 [pm-process] Starting Process: default_group~oc4j_soa~default_group~1 (943261444:0)
    07/10/18 10:54:25 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261442:7428)
    07/10/18 10:54:33 [libopmnoc4j] Host and Port information for port type default-web-site not sent by the OC4J process
    07/10/18 10:54:33 [libopmnoc4j] WARNING: OC4J did not send the protocol value for port id: default-web-site
    07/10/18 10:54:33 [libopmnoc4j] Port information in the ONS notification is incorrect for proc: 943261443. Some of the reasons for the failure are:
    1. ajp, rmi and jms ports could not be bound by the process.
    2. If a port value for a certain port ID is handed by OPMN to the OC4J process and this value is not returned back in the ONS notifications. For example, this can happen for certain bad JGroups related configurations.
    07/10/18 10:54:33 [libopmnoc4j] Process Start Error: default_group~home~default_group~1 (943261443:300)
    07/10/18 10:54:33 [pm-process] Stopping Process: default_group~home~default_group~1 (943261443:300)
    07/10/18 10:54:33 [libopmnoc4j] Process Stop Error: default_group~home~default_group~1 (943261443:300)
    07/10/18 10:54:33 [libopmnoc4j] Failed to construct stop command for proc: 943261443
    07/10/18 10:54:33 [libopmnoc4j] Forcefully Terminating Process: default_group~home~default_group~1 (943261443:300)
    07/10/18 10:54:35 [pm-process] Starting Process: default_group~home~default_group~1 (943261443:0)
    07/10/18 10:54:45 [libopmnoc4j] Host and Port information for port type default-web-site not sent by the OC4J process
    07/10/18 10:54:45 [libopmnoc4j] WARNING: OC4J did not send the protocol value for port id: default-web-site
    07/10/18 10:54:45 [libopmnoc4j] Port information in the ONS notification is incorrect for proc: 943261443. Some of the reasons for the failure are:
    1. ajp, rmi and jms ports could not be bound by the process.
    2. If a port value for a certain port ID is handed by OPMN to the OC4J process and this value is not returned back in the ONS notifications. For example, this can happen for certain bad JGroups related configurations.

  • Error while installing the NerWeaver Platform

    Error While installing the NetWeaver Instance
    Posted: Nov 22, 2004 2:37 PM        Reply      E-mail this post 
    When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
    MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
    The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
    For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
    Please help me out the error.

    Hi George,
    Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
    Regards
    Vivek

Maybe you are looking for