Return to run the program again
Hello all!
I'm wondering if it is possible to return to the last step of the program to run it again in labview.
For example, a vi doing computation, if the final result doesn't satisfy a certain standard, I would like that a one button diagram shows out saying "the
program should run again", and when I click the "OK" the program automaticly re-run.
Please let me know how could I realize this. Thanks in advance!
Chao
Solved!
Go to Solution.
Sounds like a state machine. Possibly with an event structure that looks for a button press. When you press the button the event is generated and then the state machine goes into the state that does the work you want. LabVIEW comes with several examples of state machines and there are a few white papers.
http://www.ni.com/white-paper/3024/en/
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Similar Messages
-
Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?
Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html. -
my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regardsDo you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up -
An error occurred while preparing the installation. Try running the application again
I Have erased the hard drive of my MBP in order to perform a clean reinstall of OS X Mavericks, according to these instructions.
When I tried to reinstall, my internet connection stopped (was broadcasting via another MBP and the cable from that one got disconnected), so I restarted the erased MBP to try again. Holding command+R, it booted in internet recovery (as the recovery partition was erased along with the rest of the hard drive), but could not connect over the broadcasted WiFi, so I created a bootable USB flash drive according to these instructions on the other MBP.
This installation went smooth without any hiccups, but due to an oversight I had to do it again the next day.
I took the same steps, with the same bootable drive (I did not create a new one the first time) but this time I couldn’t get through the prepare to install phase. At the end, where the “about a second remaining” message stays for about 20 minutes, I get the “An error occurred while preparing the installation. Try running the application again” message. When I quit the installer (only option at that stage) and return to Disk Utility, the internal drive on which I tried to do the installation is not visible anymore.
I tried this (after a reboot every time) with a new bootable usb drive with the same download of the OS X Mavericks installer and with a new one, each ending with the same error. The installer was downloaded on an MBP on which Mavericks is also installed, with the same Apple ID. The App Store did not allow me to change Apple ID for the Mavericks download. Can this pose a problem? It did work the first time, though.
Note that this error occurs at a different stage than the one with the same message due to the wrong date (this discussion amongst others). I also checked the date in terminal and this appears to be correct, when I consider the timezone.
Here are a few lines from the installer log (omitted similar lines and lines that could contain personal information). The most important line is the last one, indicating the error.
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:Install PROJECT:Install-846
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: @(#)PROGRAM:IA PROJECT:InstallAssistant-476.8
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Hardware: MacBookPro9,2 @ 2.50 GHz (x 4), 4096 MB RAM
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Running OS Build: Mac OS X 10.9.3 (13D65)
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: DYLD_NO_FIX_PREBINDING=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __CF_USER_TEXT_ENCODING=0x0:0:0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: PWD=/
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: SHLVL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: __OSINSTALL_ENVIRONMENT=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: CI_DEFAULT_OPENCL_USAGE=0
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: OS_INSTALL=1
Jun 22 02:14:01 localhost Install OS X Mavericks[423]: Env: _=/System/Library/CoreServices/Language Chooser.app/Contents/MacOS/Language Chooser
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using distribution archive from /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Configuring products from SharedSupport folder
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Install is double-dmg. Not adding chunklist to download list.
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallDVDProduct> based on media at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Using product <OSInstallESDProduct> based on distribution at /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 22 02:14:38 localhost Install OS X Mavericks[423]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not load Software Update catalog: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7fedd960ccc0 {NSUnderlyingError=0x7feddc866ef0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-sn owleopard-leopard.merged-1.sucatalog, NSLocalizedDescription=The Internet connection appears to be offline.}
Jun 22 02:14:39 localhost Install OS X Mavericks[423]: Could not fetch SWU catalog to create SWU product
Jun 22 02:14:49 localhost Install OS X Mavericks[423]: LSExceptions [0x7fedd9446e50] unloaded
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:15:12 localhost Install OS X Mavericks[423]: *** IFDCustomizationController_10_6 does not know the size of distant package at (null)
Jun 22 02:20:55 localhost Install OS X Mavericks[423]: Created IATool object:dbe23a50
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:20:56 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:09 localhost Install OS X Mavericks[423]: Preventing machine sleep.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/schijf/OS%20X%20Install%20Data/> at distance 5
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using existing boot files dir at /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using mutable product path: /Volumes/schijf/OS X Install Data
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Using boot files path: /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.BaseSystemBinaries
—a lot of similar messages, but for other packages —
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Could not find package ref in any source for: com.apple.pkg.OSInstall
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: No available package ref for compatibility update. Ignoring.
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Retrieving 0 packages (0.000 GB)
*****This is where the timer starts saying “”About a minute remaining”*****
Jun 22 02:21:42 localhost Install OS X Mavericks[423]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Finished operation queue
Jun 22 02:42:36 localhost Install OS X Mavericks[423]: Opening /Volumes/Install OS X Mavericks/Install OS X Mavericks.app/Contents/SharedSupport/InstallESD.dmg
Jun 22 02:42:38 localhost Install OS X Mavericks[423]: Extracting boot files from /Volumes/OS X Install ESD/BaseSystem.dmg
Jun 22 02:42:39 localhost Install OS X Mavericks[423]: Extracting Boot Bits from Inner DMG:
Jun 22 02:42:41 localhost Install OS X Mavericks[423]: Copied kernelcache
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied Boot.efi
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Copied PlatformSupport.plist
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Ejecting disk images
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: Generating the com.apple.Boot.plist file
Jun 22 02:42:42 localhost Install OS X Mavericks[423]: com.apple.Boot.plist: {
"Kernel Cache" = "/.IABootFiles/kernelcache";
"Kernel Flags" = "container-dmg=file:///Install%20OS%20X%20Mavericks.app/Contents/SharedSupport/ InstallESD.dmg root-dmg=file:///BaseSystem.dmg";
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Done generating the com.apple.Boot.plist file
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing /Volumes/Install OS X Mavericks -- /Volumes/Install OS X Mavericks/.IABootFiles
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Blessing Mount Point:/Volumes/Install OS X Mavericks Folder:/Volumes/Install OS X Mavericks/.IABootFiles plist:com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ***************************** Setting Startup Disk *****************************
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ****** Path: /Volumes/Install OS X Mavericks
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: ****** Boot Plist: /Volumes/Install OS X Mavericks/.IABootFiles/com.apple.Boot.plist
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: /usr/sbin/bless -setBoot -folder /Volumes/Install OS X Mavericks/.IABootFiles -bootefi /Volumes/Install OS X Mavericks/.IABootFiles/boot.efi -options config="\.IABootFiles\com.apple.Boot" -label OS X Installer
Jun 22 02:42:43 localhost Install OS X Mavericks[423]: Bless on /Volumes/Install OS X Mavericks succeeded
Jun 22 02:45:55 localhost Install OS X Mavericks[423]: Got error in writing to /Volumes/schijf/OS X Install Data/minstallconfig.xml
That last line indicates the error that occurred. (The internal drive on which I try to install Mavericks is called “schijf”, it also already has been called Macintosh HD, with no effect. This time I tried another name during the reformat to see if and when the installer renames the disk. Does it do this, or should I call the disk “Macintosh HD” myself?)
By now I also got past the internet recovery issues, being able to get the progress bar under the spinning globe and the option to install Lion (not Mavericks, but I suppose that’s because the MBP shipped with Lion). When I choose this option, the installer first spends a few hours downloading additional components. This eventually took less time than first indicated, but still about 4-5 hours. After this, the installation of about 24 minutes starts, but this takes much longer than the indicated 24 minutes, each minute taking about 15 minutes. When it was less than a minute, the internet connection got disconnected (but I don’t suppose it still needed an internet connection at this stage, having downloaded all additional components) and now the “Less than a minute” message has been there the whole night (about 9,5 hours), the last 9 hours with a spinning beachball on the screen after I accidentally clicked somewhere on the screen (nowhere in particular, he shouldn’t do something because of the click. After unplugging the power adapter, the battery icon on the screen wasn’t updated, and the WiFi icon simply disappeared, instead of showing no bars like it should when there’s no connection).
Does Anyone know how I can fix the error, because I would prefer installing with a bootable drive. Is it worth it to continue waiting on the current, apparently stuck Lion installer to finish or should I force a reboot?
Can I try using the Recovery Disk assistant (OS X Recovery Disk Assistant v1.0) to create a recovery disk with the other MBP? I think not, as this might cause trouble with 2 different MBP's using the same license.
Thanks in advance!Since this thread seems to be gaining more speed than the other one i'm working on, i figured i'd add these images to help you all out detailing the exact problem.
I'm having the same issue and I wanted to provide some info specific to my mac, and some info in general to help with diganosis.
First, my specs
Secondly, I am running an aftermarket 500 GB drive.
Third, not sure if this is realated, but this screen suggests the proress will take 3 minutes, then it abruptly umps to the restart phase after about 1.5 - 2.5 minutes.
And finally, here is the seeminly unavoidable error message.
Also, other things I've tried now are
installing it from the "show package contents area",
mounting said DMG and trying to install from there.
installing a package file called "upgradeos.pkg"
no luck. -
My iTunes installer was interrupted & now it's telling me "Your system has not been modified. To complete these operations at a later time, please run the installer again". The only problem is, I've tried to run it about six or seven times.
I'm not sure anyone here knows more about the Java plugin than you do...
Were you starting the control panel from disk as administrator because it didn't work starting it through the Start menu (if you have Control Panel set to View by Category, the Java control panel is under "Programs"). -
I plugged my iPad to my computer this morning and it said there was a new version of IOS available. Tried to install.
Install failed.
Now itunes won't open: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."
Went to www.itunes.com, downloaded and tried to install. Install failis saying I need to verify that I have credentials to run the program. Choices: Abort, Try again, Ignore. Needless to say the only choice that works in Abort, so I can't connect my iPad to iTunes.
Is there a way to uninstall the program and then try again?
Or other fix?How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808http://support.apple.com/kb/ht1808
Cheers, Tom -
Why won't Parallels run the program?
OK so I'm an teacher and recently I've recieved new software to try out with my classes and obviously it won't run on my laptop (os Mountain LIon). So I started to investigate the options.
1 Make partitions and run two os's at separate times. NOT working anymore not sure why.
2 Use bootcamp to run the two os's. Haven't tried yet.
3 Use a virtual machine. After investigating I chose to use Parallels 7. It downloaded and seemed very user friendly and even gave me the option of a trial windows 8. I installed it and the program wouldn't work it needs to be a windows 7 so I found one and it wouldn't work either then tried to install Snow Leopard. I tried with the disc that came with my laptop didn't work said that only server versions are supported so I found a server version downloaded it and installed it but it won't even give me the option of seeing the disc within Parallels and my file sharing isn't working with it.
So that's where I'm at, I've been working at this for a week now, reading around and trying new things but still not sure why none of them run the program.
A MichaelLax has posted a detailed way to install snow leopard but I'm not sure why all the terminal parts are necesary if that's what I need to do I'll do it but I don't understand why.
http://forums.macrumors.com/showthread.php?t=1365439
I'm not looking to use the Parallels or any program much only to acces the information that they've given me to see if I can use it.OK so here we go I installed windows again and everything seems to be working as normal so I put the disc in and I took screen shots but it won't load them for some reason but anyways here it is. These are the files and what happens when I click on them
Audio file audio files always able to access
Video file same as audio
xSprocket several worksheets and things like that
xtras more program files
autorun when I click on it saws notepad is too small I need a bigger editor
readme system requirements
TN_active teach file when opened on the mac side it says its a powerpc product it won't open and on the windows side it switches to mac and opens stuffit expander (the compression thing I told you about) and then creates a file with nothing in it
TN_active teach application when I open it on windows it says its not a valid win32 application and on mac side it switches to windows and says the same thing
the link you posted BobTheFisherman was very helpful except for the fact that I need to install it first but I tried anyways and the indicated files had not been made yet.
In the end though I've come to the conclusion that it is not a Parallels or mac problem but simply one of the software I'm going to look for other windows programs to test how they work though just to prove my hypothesis I thank both of you for your efforts on helping me. -
Hi APO Experts,
In our project, we have received more sales order inconsistencies which is not clearing by CCR program and it is clearing by program /SAPAPO/SDRQCR21 with option as Build Reqmts from Doc. Flow, So We have decided to schedule the background job on daily basis for program /SAPAPO/SDRQCR21 with option as Build Reqmts from Doc. Flow, performing the testing in our quality system and observed the below strange behavior.
When I am running the program /SAPAPO/SDRQCR21 with Range of products and some location range with option as Build Reqmts from Doc. Flow, in Background job. In output it is suggesting to delete one sales order. If I checked that Sales order in ECC, it is for an different location, that is not part of my selection and the order is open. In MD04 the Qty is showing 1 ( as per sales order) but in APO RRP3 view the order qty is showing Zero. I have run the CCR, it is coming in different in content and if I push, the different is not going to APO.
I have tried running the program /SAPAPO/SDRQCR21 with plant which is mentioned in that sales order with option as Build Reqmts from Doc. Flow, in Background job , it is suggesting this sales order under update option correctly.
Can you please help me understand why it is behaving differently like the location is not part of my selection and why it is suggesting the wrong action. And also whether is it advisable to run the /SAPAPO/SDRQCR21 with option as Build Reqmts from Doc. Flow at plant range and material range in background job.
Thanks & Regards,
Sundaram RadhakrishnanSundaram,
It sounds to me like the sales document records in the OLTP and in APO were created at different times. This is common in Dev and Qual environments when the systems are commonly created at two different times, and each was a copy of an existing system that contained sales data. The order number you see in //rrp3 is somewhat irrelevant; system generally uses the guid for many activities.
FYI during Dev and Qual refreshes, if you are copying from a production environment that contains data, it is always best to create the OLTP and SCM images at the same time, and to copy them both to the Dev and Qual systems at the same time. If you don't do this, you are faced with the additional tasks associated with getting the copied systems back into synch.
If this is Dev or Qual, I suggest that you just completely wipe out all sales orders in APO and rebuild them using the CIF.
If this is a mature production environment, the only time I have ever seen this issue is due to improperly created CIF enhancements. Speak to your developers to find the root cause, and correct this problem. Then, wipe out all sales orders and rebuild with CIF.
Best Regards,
DB49 -
Error in running the Program SDRQCR21
Hi,
For a material,the sales order which are rejected are showning in MD04.When i try to run this program
SDRQCR21,it gives me timed out error.
Since there are lot of sales order for that material.
Please can any one help me in this issue...
Thanks
SriniHi,
If we run the program,is the orders which are rejected gets deleted or any other scenario like delivery not created for the order etc will also get deleted from the MD04.
Please clarify on this issue.
Thanks
Srini -
Error while running the program of deferred Tax ( New)Program Name RFUMSV50
Hi
I am getting the error while running the program of deferred Tax ( New)
Following is the detailed error :
Enter rate / INR rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction.
Thanks & Regards,
PMCheck the following notes:-
1) Note 46582 - 2.2->3.0: error SG105 for exchange rate M w. inv.
2) Note 165645 - SG105:Enter rate & / & rate type & for 00.00.0000..
3) Note 483542 - F110: SG105 in maintenance of proposal run with wthhldng tax
4) Note 975657 - SG 105: FI-Enjoy with foreign currency and calculate tax
thanks
G. Lakshmipathi -
Error while running the program
Hello everybody
I have installed jdk in my computer, but when I try to run the program it shows the following error
"Unable to load the main class"
The program is compiling properly the only problem is in running the program.
What is the reason for this error and how can I fix this error?
RegardsAre you familiar with the classpath?
It tells the JRE which directory has your *.class files.
At the command line, you would java -cp dir_name class_file_nameIf you're using an IDE, check the menus at the top of the editor screen. -
Writing agents o/p to external file and if i run the agent again it should
Hi All,
i want to run a agent and that result should be displayed in external file system.and i achieved this by using writing VB script and in agents i used actions in that we have invoke server script.And i got the perfect output but what 's my scenario is when i run the agnent again it should create another file with below requirements.
The file name must contain a suffix containing the date in yyyymmdd format. In cases where the file stored more than once per day, a sequence number must also be provided within the filename.
(i.e. v1_yyyymmdd, v2_yyyymmdd, v3_yyyymmdd, v4_yyyymmdd, v5_yyyymmdd…)
And my VB script is like below
'#####=========================================================================
'## Title: Export Report
'## Rev: 1.0
'## Author: Paul McGarrick
'## Company: Total Business Intelligence / http://total-bi.com
'## Purpose:
'## 1. This script takes a file from OBIEE and saves to the file system
'## 2. Creates a reporting subdirectory if not already present
'## 3. Creates a further subdirectory with name based on current date
'## Inputs (specified in Actions tab of OBIEE Delivers Agent):
'## 1. Parameter(0) - This actual file to be exported
'## 2. Parameter(1) - The filename specified within OBIEE
'## 3. Parameter(2) - Report sub directory name specified within OBIEE
'#####=========================================================================
Dim sBasePath
sBasePath = "E:\reports\reports"
Dim sMasterPath
sMasterPath = sBasePath & "\" & Parameter(2)
Dim objFSO
Set objFSO = CreateObject("Scripting.FileSystemObject")
'check whether master directory exists, if not create
Dim objMasterDir
If Not objFSO.FolderExists(sMasterPath) Then
Set objMasterDir = objFSO.CreateFolder(sMasterPath)
End If
Set objMasterDir = Nothing
'build string to get date in yyyy-mm-dd format
Dim sDate, sDateFull
sDate = Now
sDateFull = DatePart("yyyy", sDate) & "-"
If Len(DatePart("m", sDate))=1 Then sDateFull = sDateFull & "0" End If
sDateFull = sDateFull & DatePart("m", sDate) & "-"
If Len(DatePart("d", sDate))=1 Then sDateFull = sDateFull & "0" End If
sDateFull = sDateFull & DatePart("d", sDate)
Dim sDir
sDir = sMasterPath & "\" & sDateFull
Dim objDir
If Not objFSO.FolderExists(sDir) Then
Set objDir = objFSO.CreateFolder(sDir)
End If
Set objDir = Nothing
Dim sFileName
sFileName = sDir & "\" & Parameter(1)
Dim objFile
objFSO.CopyFile Parameter(0), sFileName, True
Set objFile = Nothing
Set objFSO = Nothing
could you please any body help me out from this....I assume you are using Windows. Try to write a batch file so that that would look for the ibot name when ever its finds rename the file name as required.
This would be easiest way..
http://lmgtfy.com/?q=rename+a+file+to+current+date+using+batch+file
Edited by: Srini VEERAVALLI on Apr 8, 2013 7:23 AM
Can you updates all your posts?
Edited by: Srini VEERAVALLI on May 13, 2013 6:44 AM -
I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.
Davinci thank you for the update.
Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder. Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool. You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
The CC Cleaner Tool is designed to be used after running the uninstallers. Without running the uninstallers first then a complete removal may not be possible. -
Error Message: A main Java class needs to be specified to run the program.
Hi,
I am adding a program object to cms using java program, and trying to run it. I am getting an error message like
Error Message: A main Java class needs to be specified to run the program.
Could you please help me on this., please find the pasted program object pasted below
public class MoveReports {
public void run(IEnterpriseSession enterpriseSession, IInfoStore infoStore,
String[] args) throws SDKException {
int objectSize = ;
String cms = "";
String username = "";
String password = "";
String auth = "";
try {
ISessionMgr sm = CrystalEnterprise.getSessionMgr();
enterpriseSession = sm.logon(username, password, cms, auth);
IInfoStore oInfoStore=(IInfoStore)enterpriseSession.getService("", "InfoStore");
IInfoObjects iObjects = null;
iObjects = oInfoStore.query("Select * from CI_INFOOBJECTS where SI_PARENTID = 44104 AND SI_PROGID LIKE '%CrystalEnterprise.Excel%'");
// Getting total number of reports
objectSize = iObjects.size();
if(objectSize > 0)
for (int count = 0; count < objectSize; count++)
IInfoObject obj = (IInfoObject) iObjects.get(count);
// Specify the Destination parent Id to move the reports
obj.setParentID(44102);
oInfoStore.commit(iObjects);
System.out.println("Reports Moved Successfully");
else
System.out.println("Reports Not Available");
catch (SDKException e) {
e.printStackTrace();
System.out.println("Error : " + e.getMessage());
Thanks&Regards
Damodar
Edited by: Damodaram B on Nov 2, 2009 1:29 PMThere's couple of things at issue here - you've not specified the proper interface (IProgramBase or IProgramBaseEx), and the program job server can't find the class in question (a deployment issue).
You may want to open a support ticket with SAP.
Sincerely,
Ted Ueda -
Itunes says I need a version 10.7 or higher for my iphone 5 so when I go to upgrade/install the latest from the website I keep getting a message "errors occured during installation before itunes could be modified.... run the installer again" any ideas?
iTunes doesn't yet provide support for Windows 8. Some can get it installed others not.
tt2
Maybe you are looking for
-
I've tried the methods I've seen on youtube and other iphone tech help sites but I am still having the same problem. Today while updating to IOS 7 my iphone 4 battery died and I didnt have a charger, now that I am home an I put in on the charger I no
-
Hai every body, Q) can any body tell me which G/L accounts get updated in subcontracting scenario?during Goods receipt, goods issue, Invoice. Points will be rewarded. Rgds, K.Praveen
-
it really wont open...
-
Can I use two HDDs in Qosmio G40-10E
Does anyone know if it is possible to fit two Hard drives in this laptop. I read simewhere that there were supposed to be two hard drive slots in it? If so where is it located? Would ther be any issues around extra heat that might be generated etc? I
-
Can`t get rid of "Launcher" bar on bottom of my home page.
I have Google as my home page. The one with only the search text bar with Firefox logo above it. Nice and clean. Now I keep getting what is called a 'launcher' toolbar on my Google home page and I would like to get rid of it. I found by right-clickin