Reusable Component: Fragment with onw controller

Hi,
I have written a JS-fragment, which shows a table of files. You can upload/download files from this view.
All functions are coded within this one Files.fragment.js file.
I wonder what the best way would be, to have ONE single, own controller for this fragment.
I dont want to add all function within the "parent" controller.
The fragment is used on several views within the app.
Is there any best practise to build more complex, reusable component in UI5?
Jens

Hi Jens,
To my knowledge, Fragments can't have a dedicated controller assigned -- it uses the controller of the calling view:
Fragments are pieces of UI, just like SAPUI5 MVC views, but without the view control around the content and without their own controller.
SAPUI5 SDK - Demo Kit
However, according to the API, you could indeed specify a specific controller so I'm not sure if it would be possible to use a dedicated controller for a Fragment... I have never tried this with Fragments.
Before Fragments, if I had a complex view, I would have one 'container' or 'parent' view with its controller, and the different inner parts of this container/parent view consisted of other views (which uses the container controller). And only the inner views that were reusable would have their own controller.
In other words, if it is possible to have a dedicated controller for your reusable Fragment, then that's indeed the way to go IMO

Similar Messages

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Problem with reusable component

Dear All,
I have 2 web dynpro components one is header part which displays the employee information.
I am using this component as a reusable component in the second component.I am able to display
two components in my current webdynpro application.
When I am trying to get the personnel number from the first component i.e Header component
I am not able to get.Pls help me in getting the same pernr used in the first component in the second component.
Thanks,
Reddy.

sudhir,
try this.. it worked for me.
Data: w_url type string,
w_value type string.
get the url of calling applicaton
call method cl_Wd_utilities->construct_wd_url
exporting application name = name of second application( to which u want to pass parameter )
importing out_absolute_url = w_url.
***Make the value type compatible that has to passed with url.
w_string = lv_pernr
***Now attach the parameter and its value with url that have to passed to 2nd application
call method cl_http_Server=>append_field_url
exporting name = 'pernr'
value = ' w_value'
changing url = w_url.
then popup window for 2nd application with above url
lo_window = lo_window_manager->create_external_application ( url = w_url ).
lo_window -> open( ).
***now in wddoinit of 2nd application
data lv_param type string
lv_param = wdr_task=>client_window->get_parameter( ' pernr ').
Now you can use lv_param in 2nd application.
it will definetly works. let me know if you have any confusion
Regards
srinivas

BUG: Popup in page fragment; with many regions and popup binded to backing.

BUG: Popup in page fragment; with many regions and popup or parent binded to backing bean.
JDEV11.1.2.1 Popup will not popup.(sometimes works if using RichPopup.Show() in backing bean Java code.)
I have a bug (Popup will not popup)that only happens when I have more than one of the same region.
And I have a popup in the page fragment is binded to backing bean.
My SR guy is out today but we plan to enter one.
test.jspx
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:f="http://java.sun.com/jsf/core">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
        <af:document title="test" id="d1">
            <af:form id="f1">
                <af:panelGroupLayout id="pgl1" layout="horizontal">
                    <af:outputText value="BUG JDEV11.1.2.1 and IE7. Broken Popup! If I have a jsff fragment and I have many regions of this fragment."
                                   id="ot2"/>
                    <af:outputText value="Inside the fragment I have a popup. If that popup or its parent are binded to a Backing Bean the popup doesn't work."
                                   id="ot1"/>
                </af:panelGroupLayout>
                
                <af:region value="#{bindings.taskflowemp1.regionModel}" id="r1"/>
                <af:region value="#{bindings.taskflowemp2.regionModel}" id="r2"/>
                
            </af:form>
        </af:document>
    </f:view>
</jsp:root>region.jsff
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:f="http://java.sun.com/jsf/core">
<af:group id="g1">


       
    <af:group id="g2" binding="#{TestBean.popupGroup}">
      <af:popup childCreation="deferred" autoCancel="disabled" id="p1" binding="#{TestBean.testPopup}">
        
        <af:dialog id="d2" title="Dialog Title">
          <f:facet name="buttonBar"/>
          <af:outputText value="Dialog Contents" id="ot100"/>
        </af:dialog>
      </af:popup>
    </af:group>
    <af:panelGroupLayout id="pgl1">
      <af:panelBox text="Region" id="pb1">
        <f:facet name="toolbar"/>
        <af:commandButton text="showPopupBehavior" id="cb1" >
          <af:showPopupBehavior popupId="p1"/>
        </af:commandButton>
        <af:commandButton text="AdfPage.PAGE.findComponent JavaScript" id="cb2" actionListener="#{TestBean.popupTestJavaScript}"/>
        <af:commandButton text="RichPopup.Show() Java" id="cb3" actionListener="#{TestBean.popupTestJava}"/>
      </af:panelBox>
    </af:panelGroupLayout>
</af:group>
</jsp:root>TestBean.java
package view;
import javax.faces.context.FacesContext;
import javax.faces.event.ActionEvent;
import oracle.adf.view.rich.component.rich.RichPopup;
import org.apache.myfaces.trinidad.component.UIXGroup;
import org.apache.myfaces.trinidad.render.ExtendedRenderKitService;
import org.apache.myfaces.trinidad.util.Service;
public class TestBean {
    private RichPopup testPopup;
    private UIXGroup popupGroup;
    public TestBean() {
    public void setTestPopup(RichPopup testPopup) {
        this.testPopup = testPopup;
    public RichPopup getTestPopup() {
        return testPopup;
    public void popupTestJava(ActionEvent actionEvent) {
        if(testPopup != null){
            RichPopup.PopupHints ph = new RichPopup.PopupHints();
            testPopup.show(ph);
        }else{
            System.err.println("TestBean.testPopop IS NULL!");
    public void popupTestJavaScript(ActionEvent actionEvent) {
        showPopupTest("r1:0:p1");
    private static void showPopupTest(String popupId) {
        FacesContext facesContext = FacesContext.getCurrentInstance();
        ExtendedRenderKitService service =
            Service.getRenderKitService(facesContext,
                                        ExtendedRenderKitService.class);
        service.addScript(facesContext,
                          "AdfPage.PAGE.findComponent('" + popupId + "').show();");
    public void setPopupGroup(UIXGroup popupGroup) {
        this.popupGroup = popupGroup;
    public UIXGroup getPopupGroup() {
        return popupGroup;
}

Thanks that fixed the problem.
"a user error"
Well I followed your book! Chapter 6 of the "Oracle Fusion Developer Guide - Working with Bounded Task Flows in ADF Regions". I think this comes back to book writer error. I found almost no mention of BackingBeanScope in this chapter. Don't you think this would be an important note?
"did you know that there is a Java API (on the RichPopup instance) to launch a popup ?"
Yes I posted in my code! If you read the above code you would see it there.
I don't really understand why the scope of the bean has anything to do with af:showPopupBehavior or AdfPage.PAGE.findComponent.

"detected a page fragment with multiple root components" warning

I am getting a warning on the standalone WLS when I run my page that contains a taskflow as region. I am using a page fragment in my taskflow.
<Warning> <oracle.adfinternal.view.faces.renderkit.rich.RegionRenderer> <ADF_FACES-60099> <The region component with id: ptMain:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.>
The warning states the obvious, I have everything within a panelheader in my page fragment. Also, I do not get the warning on the integrated WLS. Any ideas as to why this warning is still popping up in the log? I am using JDev 11.1.1.3.
Thanks,
Jessica

Thank you for responding. I do not have any popups. I do, however, have another region nested within this fragment ( have this warning on another fragment that doesn't have a nested region though). Here is the code for my fragment.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:f="http://java.sun.com/jsf/core">
<af:panelHeader text="Pawn"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.ph1}"
id="ph1" type="default">
<af:panelFormLayout id="pfl2">
<af:panelSplitter binding="#{backingBeanScope.backing_Fragments_PawnSearch.ps1}"
id="ps1" orientation="vertical" splitterPosition="62"
inlineStyle="width:775px; height:660px;">
<f:facet name="first">
<af:panelBox text="Search #{bindings.agency.inputValue} Data to Update"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.pb1}"
id="pb1">
<f:facet name="toolbar"/>
<af:panelGroupLayout id="pgl3" layout="horizontal">
<af:inputText value="#{bindings.control_number.inputValue}"
label="Control Number" required="true"
columns="#{bindings.control_number.hints.displayWidth}"
maximumLength="#{bindings.control_number.hints.precision}"
shortDesc="#{bindings.control_number.hints.tooltip}"
id="it1">
<f:validator binding="#{bindings.control_number.validator}"/>
</af:inputText>
<af:inputDate value="#{bindings.trans_date.inputValue}"
label="Date" required="true"
shortDesc="#{bindings.trans_date.hints.tooltip}"
id="id1">
<f:validator binding="#{bindings.trans_date.validator}"/>
<af:convertDateTime pattern="#{bindings.trans_date.format}"/>
</af:inputDate>
<af:inputText value="#{bindings.agency.inputValue}" simple="true"
required="#{bindings.agency.hints.mandatory}"
columns="#{bindings.agency.hints.displayWidth}"
maximumLength="#{bindings.agency.hints.precision}"
shortDesc="#{bindings.agency.hints.tooltip}"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.it2}"
id="it2" visible="false">
<f:validator binding="#{bindings.agency.validator}"/>
</af:inputText>
<af:commandButton actionListener="#{bindings.ExecuteWithParams.execute}"
text="Search"
disabled="#{!bindings.ExecuteWithParams.enabled}"
id="cb5"
returnListener="#{backingBeanScope.backing_Fragments_PawnSearch.refreshPage}"
action="#{backingBeanScope.backing_Fragments_PawnSearch.RenderMe}">
<af:setActionListener from="#{bindings.PawnItemView1Iterator.currentRowKeyString}"
to="#{requestScope.pawnkey}"/>
</af:commandButton>
<af:spacer width="10" height="10"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.s1}"
id="s1"/>
<af:goButton text="Clear Values and Create New" id="gb1"
destination="index.jspx"
rendered="#{backingBeanScope.backing_Fragments_PawnSearch.saveButtonRendered}"/>
</af:panelGroupLayout>
</af:panelBox>
</f:facet>
<f:facet name="second">
<af:panelGroupLayout binding="#{backingBeanScope.backing_Fragments_PawnSearch.pgl4}"
id="pgl4" layout="scroll" partialTriggers=""
visible="true">
<af:panelGroupLayout binding="#{backingBeanScope.backing_Fragments_PawnSearch.pgl6}"
id="pgl6" inlineStyle="width:775px;"
visible="#{backingBeanScope.backing_Fragments_PawnSearch.renderTF}">
<af:region value="#{bindings.PawnEntryFormTF1.regionModel}"
id="r1" inlineStyle="width:750px;"/>
</af:panelGroupLayout>
<af:panelGroupLayout binding="#{backingBeanScope.backing_Fragments_PawnSearch.pgl5}"
id="pgl5" layout="horizontal"
visible="#{backingBeanScope.backing_Fragments_PawnSearch.renderMessage}">
<af:outputFormatted value="No #{bindings.agency.inputValue} Pawn data matching the Control Number and Transaction Date from above."
binding="#{backingBeanScope.backing_Fragments_PawnSearch.of1}"
id="of1"
inlineStyle="font-weight:bolder; font-size:small;"/>
<af:spacer width="10" height="10"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.s2}"
id="s2"/>
<af:goButton text="Clear Search and Start Again"
binding="#{backingBeanScope.backing_Fragments_PawnSearch.gb2}"
id="gb2" destination="index.jspx"/>
</af:panelGroupLayout>
</af:panelGroupLayout>
</f:facet>
</af:panelSplitter>
</af:panelFormLayout>
</af:panelHeader>

</jsp:root>

Is it possible to get component associated with DefaultListSelectionEvent?

Hallo,
Is it possible to get component associated with DefaultListSelectionEvent, please?
There are multiple tables in my window. All tables (must!) have same TableSelectionListener. Problem is that there's no information about component in default list selection model implementation. When fireing events DefaultListSelectionModel use self as event source (see DefaultListSelectionModel.fireValueChanged fragment below).
e = new ListSelectionEvent(this, firstIndex, lastIndex, isAdjusting);Any ideas how to get component in ListSelectionListener.valueChanged, please? But don't forget that as a programer, i am the lazy. Thus implementing new selection model is not an acceptable solution, but class extension is :p
One idea is to remember models component in constructor and override DefaultListSelectionModel.fireValueChanged like this:
class MyGreatListSelectionModel extends DefaultListSelectionModel {
   protected JComponent boss;
    public MyGreatListSelectionModel(JComponent c) {
        boss = c;
    @Override protected void fireValueChanged(int firstIndex, int lastIndex, boolean isAdjusting)
        Object[] listeners = listenerList.getListenerList();
        ListSelectionEvent e = null;
        for (int i = listeners.length - 2; i >= 0; i -= 2) {
            if (listeners[i] == ListSelectionListener.class) {
                if (e == null) {
                    // Only changed 'this' to 'boss'
                    e = new ListSelectionEvent(boss, firstIndex, lastIndex, isAdjusting);
                ((ListSelectionListener)listeners[i+1]).valueChanged(e);
}This should work, but if there already exists some mechanism, such extension is just slowing app down.

Thanks for your help.
However I could not get the result. I am using following code:
public void myaction(ActionEvent event)
FacesContext context = FacesContext.getCurrentInstance();
UIViewRoot view = context.getViewRoot();
UIComponent UI = view.findComponent("tab");
if(UI == null)
     System.out.println("UI Not Found ");
else
     System.out.println("Get Current FecesContext");
There is an Component having id "tab" is available on JSF page but I am getting "UI not Found" every time. Is there somthing wrong...Please suggest.

Enhancing the component ERP_H with a custom field in the web UI

Hi,
I'm facing an error when enhancing the component ERP_H with a custom field in the web UI.
I've followed the steps mentioned in the pdf document called "Enhancement Options for the Lean Order Interface" (Note
1224179):
I´ve done a enhacement on ERP_H component.
I added a field to the view Headerdetail called "ZZCCTYPE1", but when I set a value in UI, I haven´t read this field in abap code.
The SET method (SET_ZZCCTYPR1) in the context node is ok, in debug I see that the method current->set_property, is working fine.
I've tried to read the atribute with lr_entity->get_property_as_string ( 'ZZCCTYPR1' ), but doesn´t work. When I read other "standard field", the statement is ok and it has value.
When I set the value of the field from ECC (VA01/VA02), it is kept by the system.
Could anybody help me?
Thanks in advance,
Regards,
Andrea Ricci

Hi Pooja,
When you created your custom views, did you bind the view context nodes to the corresponding context nodes of your component controller?
From the exceptions you reported it seems that this binding is missing.
To create this binding, you can right click on your view context node , choose "Create Binding" and bind it to the context nodes of your Component Controller.
Hope this helps.
Regards,
Nisha

A datasheet component compatible with Microsoft Sharepoint Foundation 2010 is not installed error

I have 2013 Office installed and using 2010 SharePoint Foundation.
The button 'Datasheet View' is available on the site but when clicked on I get this error:
The list cannot be displayed in Datasheet view for one or more of the following reasons:
- A datasheet component compatible with Microsoft SharePoint Foundation is not installed.
- Your Web browser does not support ActiveX controls.
- A component is not properly configured for 32-bit or 64-bit support.
I have installed and repaired the Office Suite already, ActiveX is enabled in the browser etc.
I have also enabled the Microsoft Add-ons.
Installed on Windows Server 2008 R2.
How can I solve this issue?

Hi,
1. The Edit
in Datasheet view functionality in SharePoint Server 2010 is not supported if you install
64-bit Office 2013 client. The Edit in Datasheet functionality
is available if you install 32-bit Office 2013 client
http://technet.microsoft.com/en-us/library/ee681792.aspx
2. Edit in data sheet view is not supported in 64 bit version of the i.e.
If I understand correctly you are trying to access site from the Windows server 2008 R2, the default OS installation will have two browsers. Open internet explorer that doesn't have (64 bit) in the bracket. The one with 64bit is not supported
http://office.microsoft.com/en-us/sharepoint-foundation-help/use-datasheet-view-in-64-bit-office-2010-HA101882420.aspx
Regards Murali

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

Windows Server 2008 R2: Server unable to authenticate with Domain Controller

Hello, I was wondering what could be the reason for this error if it is certain that there was no other computer on the network using the same name:
This computer could not authenticate with<Domain-controller>, a Windows domain controller for domain <Domain-name>, and therefore this computer might deny logon requests. This
inability to authenticate might be caused by another computer on the same network using the same name or the password for this computer account is not recognized.
What would cause the machine account pw to be 'not recognized'?

You can track changes in AD by enabling AD Auditing: https://technet.microsoft.com/en-us/library/cc731764%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
As reading the logs is usually a complicated and time consuming task, it is recommended to use a third party tool for auditing. The one I usually recommend is Lepide Auditor - Active Directory: http://www.lepide.com/lepideauditor/active-directory.html
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

How to package a page template as a reusable component??

Hello, i need to package a page template as a reusable component, this template has images and lot of parameters.
Any suggest?

carlson.steve wrote:
So I have done as you suggested and created a new and separate application to hold not only my jsf template files but also my trinidad-config and trinidad-skins xml files, packaged it into an ADF library Jar and then added that jar to the libraries of my forward facing public app but still can't get the public app to see either the jsf template or trinidad skinning files... what am I doing wrong here?Hi,
I suggest that you verify that both pagetemplate-metadata.xml and oracle.adf.common.services.ResourceService.sva service resources file are packaged in the META-INF directory of your Template Project ADF Library JAR.
Cheers,
Nick

How do I create a track with just controller MIDI data in it?

How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it.
Ideas?
Thanks
-Mike

Soniq2 wrote:
How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
Let me qualify, I'm using Logic 9, not upgrading for various reasons.
Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school) Here's an example of an external instrument setup in the Environment.
A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names). This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

PortalRuntimeException in Business Object document iview No portal component associated with the following context

Hi all,
We are stumped with a problem in our QA Enterprise Portal (7.3.1 Sp7) that throws a portal runtime error when we preview a Business Objects document iview. The Business Objects Server versions are 4.0 SP5 and/or 4.1 SP3.
The error is caught in the the defaultTrace file, /usr/sap/QNW/J00/j2ee/cluster/server0/log
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: There is no portal component associated with the following context:
pcd:portal_content/com.summit.SES_BI/com.summit.iviews/Daily_Margin
at com.sap.portal.prt.component.PortalComponentContext.<init>(PortalComponentContext.java:93)
Here is what we have tried
* Confirmed the iviews exist in the PCD, by browsing to the content folders and right lick, preview on the iview.
* Our PRD and DEV systems work correctly and are on same versions of EP Runtime and java. 7.3.1.7.0.201..
* Occurs with all Businessobjects iviews from the QA portal and all doc types, webis, dashboards. Tried creating new iview.
* Reapplied the com.sap.businessobjects.iviews.templates.epa to the Portal from t he BI 4.1 SP3 distribution
* Deleted and recreated the BI portal system connector using the SAP BOBJ system template set path to http://bi-qas:8080/BOE
* Set the embed key value in the BI system connector property and in the custom global.properties file, restarted tomcat and SIA services
* Set permissions for everyone end user on the content folders and the BI system connector
* Confirmed Single sign on configured correctly between BI and Portal
* Confirmed that the QA BI server is configured correctly by directing the working DEV Portal to the QA BI server.
* Performed actions in note 1709737
We are certainly stuck and the defaultTrace file is not very informative. Any suggestions are greatly appreciated
Lee Lewis

This is resolve with note 1615838 - SAP Netweaver Enterprise Portal 7.3 iView creation with BI 4.0 results in exceptions.
The note includes a file portalapp.xml that need to be inserted into com.sap.businessobjects.iviews.par that is included in the BI server distribution.
Then deploy the ear file.....
Odd thing is that the note mentions 4.0 and we are on 4.1 SP3...
Environment
SAP BusinessObjects BI Platform 4.0 SP02 Patch 4 or lower
SAP Netweaver Enterprise Portal 7.3
Lee Lewis

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

I purchased the Logitech F310 game controller for my 2011 MacBook Pro. How do I get the driver installed for it. The Disk that came with the controller is a mini disk and will not insert into my laptop.

May not make a difference anyway. The Logitech support site does not show drivers for Mac OS for the F310:
http://www.logitech.com/en-us/support/gamepad-f310?crid=411
I'd contact their support to find out if there is a Mac driver available, and if they can either give you a web link to get it, e-mail you the software, or snail-mail you a standard-size disk with the drivers.

Purchase requisition with MRP controller

Hi everybody, I need support because I have to control during purchase requisition to block users with specific MRP controller.
I mean, user A only have permission to create purchase requisition with MRP controller Z and user B only have permission to create purchase requisition with MRP controller Y.
Thanks for all the ASAP cooperation.
Regards.

Hi Mitra,
You will find your answer here.
MRP controller for PR document type
Do let me know if it helped, as I might have to explore this option for an upcoming requirement.
Thanks
Shailesh

Reusable Component: Fragment with onw controller

Similar Messages

Maybe you are looking for