Reversal of Goods Receipt on PO

Dear SAP experts, I am trying to reverse a goods receipt on a PO. For example, I have a G/R with a movement type of '101' for $100. I would like to add a G/R with movement type of '102' for $100-. I have tried transactions MB01, MIGO, and ML81.
When I use transaction MIGO, I encounter error "Transaction code MBST (=> use transaction ML81 / ML85) not defined".
If there is another way to reverse a G/R on a PO than what I have used above, I would like to know that too.
Thank you very much. Sunil

Hi Lokesh,
I tried using MBST but I get the same error "Transaction code MBST (=> use transaction ML81 / ML85) not defined". I am looking at configuration transaction 'OMBA' which shows the settings for transactions MIGO_GR and MBST. It maybe an issue with this config table (T158).
Thanks Sunil.

Similar Messages

How do you reverse a goods receipt document of a service entry sheet?

Hi SAP experts,
How do you reverse a goods receipt document of a service entry sheet? Your help/opinions will be highly appreciated. Thanks!
Jessica Mari C. Cruz
Jr. Software Development Analyst
SAP- Materials Management Team

You can sue the ML81N itself to delete the service entry sheet and once you will delete the SES, system will generate the Material document for reversal of GR.
Go to ML81N and enter the service number and change the screen to change mode.
If release statergy is used for this then cancel the release using the same statergy.
Click Revoke acceptance button or Ctrl + F2.
Edited by: Manish Kumar Agarwal on Aug 4, 2009 8:27 AM

What is d BAPI for reversal of Good Receipt Note(GRN) for movement type 102

Hi ABAPers,
I have got requirement like this , I have done Goods Receipt Note (GRN) based on Purchse order Number using '.BAPI_GOODSMVT_CREATE' with 101 movement type.
But now my requirement is reversal of good receipt note(GRN) based on Material Document Number (or) Purchase Order Number with 102 movement type. what is the bapi name i need to use. and i need to give reason for the reversal of GRN.
please tell me the field name for reason in bapi.
i have searched in the net, but i could not get proper answer to this isse.
Highly appriciate who gives answer as early as possible. I need to complete this task EOD. please give replies.
Thanks & Regards,
Vinay Kumar.

Hi,
If your material document has specific movement type i.e. 101, if you cancel document using BAPI_GOODSMVT_CANCEL, it automatically picks associated movement type 102 defined in customizing setting, you don't need to pass 102 explicitly while cancelling.
I have not seen reason code in this bapi, but it is required to pass reason code then you may try transaction code MBST using BDC.
Thanks,
Ashok Veer

Reversal of goods receipt document at incorrect rate

Hello,
We have problem with reversing of goods receipt document.
We have created a PO and fixed our exchange rate in PO. Then, we did GRN and system picked up exchange rate fixed in PO.
After this we reversed our GRN document but this time the rate was not picked up from PO but rather from Exchange rate maintainance table i.e TCode OB08.
Note: No change was done in PO in between of this two transaction
Could you please tell me why this has hapenned and how to get rate from PO instead of OB08 while reversing GRN or any other way to achieve this.
Regards,
Deepika

The entries are belwo:
Our Company Code currency is NGN and PO created in USD with exchange rate 156.00000 (fixed in PO). Rate maintained in OB08 is 148.00000
GRN :
Item     Posting Key     Account     Amount (USD)     "Amt in Local Currency (NGN)"
1     89     131001       219,240.00                          34,201,440.67
2     96     292001       216,000.00-     33,696,000.00-
3     93     641006           0                          1,728,000.00-
4     40     641006          0                          1,728,000.00
5     50     292027        1,080.00-                          168,480.67-
6     50     292027        2,160.00-                           336,960.00-
Reversal of GRN:
Item     Posting Key     Account     Amount (USD)     "Amt in Local Currency (NGN)"
1     89     131001     231,090.82-                          34,201,440.67-
2     96     292001     216,000.00                          33,696,000.00
3     93     641006     11,850.82                          1,728,000.00
4     40     641006     0                          1,728,000.00-
5     50     292027     1,080.00                          168,480.67
6     50     292027     2,160.00                          336,960.00
Here the Inventory has been reversed at rate from OB08. One more thing to notice is that Amt in Local currency is same in both entries i.e it is driving the transaction currency
Regards,
Deepika
Edited by: Deepa on Sep 30, 2011 11:13 AM

Error while reversal of good receipt

Hi Experts,
I have 1 sto for which GR is doen I want to cancel the material document using MIGO But I get belowm netioned error.
Error
Material document cannot be processed
Message no. M7130
Diagnosis
This material document was generated through the posting of a physical inventory document, a delivery via Shipping, or some other automatic movement (such as an order confirmation in PP or a usage decision in QM) and cannot be processed with this function.
System Response
In this transaction, the system can only cancel a material document if the latter was created using an Inventory Management transaction.
Procedure
Cancel the material document in the component that created the document.
You can only reverse the goods movement created through the posting of a physical inventory document by carrying out a new physical inventory for the relevant material. You can reverse a delivery effected via Shipping using transaction VL09.

Hi Jurgen,
When I try to reverse goods issue using VL09 so that goods receipt will automatically will get reversed.
But I am getting below error.
Cancellation of goods movement from decentr. systems is not possible.
Thanks,
Kiran

Reversal of goods receipt of an asset

Dear,
We have several goods receipts posted on fixed assets for which already depreciations has taken place. Now this goods receipt should be reversed via MR11 because the vendor invoice for this good receipt will never come due to several reasons.
(f.e. there were double PO's are the asset never arrived or...)
How this MR11 can be executed?
Best regards,
Paul Van Herck

activate the tick GRbasedIV
in OMBZ you then define the control
if you set the checkmark next to the movements 102, 106, 122, 162, then you allow a cancellation even the invoice is not cancelled .
hence, do not set the checkmark next to 102 to achieve your goal

BAPI for Reversal of Goods Receipt Purchase Order(Transaction : MIGO)

Hi all,
Is there any BAPI for the Reversal of posting the documents Goods receipt Purchase order
(Transaction: MIGO).
Any inputs on this..is highly appreciable...
thanks in advance...
regards..
prathima.

Hi,
Try this passing material doc and year.
* Cancel the goods movement (creates a reversal document)
CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
    EXPORTING
      materialdocument = g_material_doc
      matdocumentyear = g_matdoc_year
    TABLES
      return           = i_return.
Edited by: Raj on May 14, 2008 7:46 PM

Postings for Invoice Reversal Without Goods Receipt

Dear all,
I have 2 invoices ( material with moving price) without goods receipt.
Invoice 1
The invoice is posted before the goods receipt, therefore the posting to the GR/IR clearing account is based on the invoice price.
Invoice quantity * invoice price = 10 pieces * $10/pc = $100
The offsetting entry is posted to the vendor account.
Accounting document is below:
Credit vendor account: 100
Debit GRIR          : 100
Invoice 2
The GR/IR clearing account is cleared on the basis of the invoice price.
Invoice quantity * invoice price = 10 pieces * $20/pc = $200
The offsetting entry is posted to the vendor account.
Accounting document is below:
Credit vendor account: 200
Debit GRIR          : 200
Reversal of Invoice 2
The invoice quantity is greater than the goods receipt quantity. The credit memo quantity is covered by the quantity of the invoice surplus. The GR/IR clearing account is posted as follows:
GRIR= quantity of invoice 2 * [((Clearing value u2013 goods receipt value) : (invoice quantity of invoice 2 u2013 goods receipt quantity))] = 10 * [( (300-0) : (20-0))] = 150
The credit memo amount is posted to the vendor account. The credit memo amount is different to the posting on the GR/IR clearing account, so the difference is posted to the price difference account.
Accounting document is below:
Debit vendor account: 200
Credit GRIR          : 150
Credit price difference: 50
Those are sap standard BUT my customer want that when I revert the invoice 2 the GR/IR clearing account will not be recalculated. So accounting document should be below:
Debit vendor account: 200
Credit GRIR          : 200
How Can I do that?????? Please help me, thanks!!!!!!!!!!!!!!!!!!!!!!
Edited by: Kieu Thi Luong on Jul 19, 2011 12:45 PM
Edited by: Kieu Thi Luong on Jul 19, 2011 12:46 PM
Edited by: Kieu Thi Luong on Jul 19, 2011 12:47 PM

Since the material is valuated at moving average price, the invoice reversal will happen at the moving average price only which $15/pc in your case. Inform your customer his/her requirement can be achieved only if we move to material valuation at Standard price and that too if the invoice posting & reversal happen when the standard price of the material remains same.

Reverse post good receipt?

hi,
using VL09 to reverse PGI, but how about PGR? If i dont it wrong, i cannot use VL09 to reverse. Any idea? thanks

Hi,
You can reverse the Post Goods Issue using VL09. That means ur taking back the stock before you are doing billing in this situation.
Where as Post Goods Receipt means after doing return order and return delivery from the customer you are taking the stock back. Once after doing PGR your stock in the plant level will be updated with the returned stock.
You cant reverse this post goods receipt. If you want to do reverse the post goods receipt means you want to give the stock back to the customer. Then at this situation you cant do simple as reverse of PGI.
You have to do complete sales cycle once again, from sales order, delvery and PGI.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen

Error when trying to reverse a goods receipt using vl09

Hi All,
I'm trying to reverse an inbound delivery using vl09. Getting a message that
"Error at central message handling" . After this the system is throwing me out of the tcode vl09.
Any idea why this is appearing and how to overcome this.
Regards,
Ashwin

Hello
Please refer the previous thred
"Inbound delivery reversal issue
and also the SAP notes mentioned in earlier reply.
warm reards
Ramakrihsna

Reverse Goods Receipt for Process Order

Dear All,
Please tell me how to reverse the Goods Receipt for Process Order for which already QM is cleared for that Particular Lot.
But Confirmation is still yet Pending.
I tried MIGO - Cancel - Material Document. But it is showing a message "Process Order already processed".
Regards
buss

Hi,
Use t code MB31
Movement type 102
Stock type = Unristricted use.
Reverse by entering above information then you have to manually cancel the inspection lot.
Regards,
Vishal

Partial reversal of a goods receipt from process order

Dear All
Could anyone please help me with explaining how to do a partial reversal of a goods receipt from process order? If Iu2019m using trans CORS I have to cancel the entire operation, which I donu2019t want to do. If Iu2019m using MIGO and MT 102 I only reverse the goods receipts of the produced material, the corresponding components from the BoM is not reversed with MT 262 as they are if I cancel with CORS, and I donu2019t want to do a second MIGO transaction in which I cancel the components with MT 261. I have also tried to create an operation with a negative quantity, but without any success.
Itu2019s not an option for the business to reverse the entire quantity and then perform a new goods receipt with the right quantity.

Hi again,
I have been trying to do the reversal with CORR but Iu2019m getting the error message u201CMixed confirmation types (time ticket/time event) are not allowedu201D, message number RU179.
Anyone who can help me on the way?
/WM consultant on unknown territory

BAPI_GOODSMVT_CREATE Goods Receipt Reversal

Hello All,
According to SAP docs I need to use goodsmvt_code-gm_code = '06' but with movement type 102 I get an error message "Goods movement not possible with movement type 102". Works fine if I use regular goods receipt code '01' and movement 102. Please let me know if Im missing something here.
Also, how do you post goods receipt reversal referencing goods receipt and not PO with BAPI_GOODSMVT_CREATE?
Thanks,
Leon

Hi Leon,
I found the following documentation by SAP seems to be helpful for you.
<b>You can use the Cancel method to reverse goods movements. But you may also want to cancel a goods movement without referring to a material document (see the Cancel method).
If you want to work without referring to the document, you have to fill the field BAPI_GM_ITEM_CREATE-XSTOB in the interface (import table GOODSMVT_ITEM). In this case, the system converts the movement type assigned in the interface to the reversal movement type. Alternatively, you can set the reversal movement type in the interface. In this case, the BAPI_GM_ITEM_CREATE_XSTOB field must be transferred blank.
If you want to cancel a goods movement with reference to a reservation (without using the Cancel method) you can only transfer the field BAPI_GM_ITEM_CREATE_XSTOB if it is filled. Movement types are not transferred when you post with reference to a reservation, as the movement type is contained in the reservation item.</b>

Unlink good receipt and reversal movement

Hi,
a user did a good receipt with price 19000 u20AC, changed the price of the order in 190 u20AC. after that he reversed the good receipt but the system took the new price.
we reversed the reversal movement to try to reverse the first good receipt. the system didn't allow it because the movement has already been reversed.
do you know if there is a way to fix the issue?
thanks for your help,
stefania

Hi
So far you did the following;
(1) PO with price 19000#
(2) GR against PO (say material document #1). The inv.value will be 19000 x qty ........(mov.101)
(3) changed Po price to 190#
(4) reversed mat.doc.#1 (say mat.doc. #2). The reversed inv.value will be 190 x qty......(mov.102)
Now you cant reverse the mat.doc#1 but you can reverse mat.doc.#2
Now follow as shown below;
(1) Reverse mat.doc #2 (say mat.doc.#3).....(mov.101)
(2) Change price back to 19000#
(3) Reverse mat.doc.#3.................................(mov.102)
(4) Change the PO price to 190#
(5) Now try posting fresh GR........................(mov.101)
IN CASE IF THIS IS NOT WORKING, LET ME KNOW THE STOCK AND VALUE AT EVERY STEP THAT YOU DID.
Thanks
DMNadeem

Good Receipt Reversal using Idoc WMMBXY

Hi to all,
I've the following issue in a 4.6C R/3.
I want to reverse a Goods Receipt from Purchase Order (MB01; goods movement 102) using inbound idoc WMMBXY.
When I try to reverse some quantity in the PO of a material position without batch, there's no problem, the Idoc enter and reversal goes well.
But when I try to reverse some quantity (i.e. 3 PCE) of a material position not batch managed, Idoc goes in status 51 and gives following error:
"Deficit of PU GR quantity 3 PCE : [MATERIAL] [PLANT] [ST.LOC] [BATCH]
Message no. M7 021"
Anyone can help me?
Thanks a lot,
Alex

No one can help me?

Reversal of Goods Receipt on PO

Similar Messages

Maybe you are looking for