Reverse a receipt with appropriate security and approval ()
Hi,
Reverse a receipt with appropriate security and approval ()
Need to make security and approval on making reverse receipt according to amount limit for user combined with the Reverse
reason
thanks
You are trying to do the process which you ahve already transferred through Transaction QA11.
The role of Cancel return Process has already been done by this transaction as the Stock has already been into Un- restricted.
Best Regards,
Ankur
Similar Messages
-
Problem with ADF security and task flow calls
Hi.
I am using JDeveloper 11.1.2.0.0.
I encountered a problem when tried to apply ADF security to my application.
The way to reproduce the problem:
1. Create new Fusion Web Application;
2. Import Business Components from Tables from any existing schema and add at least one table to the ApplicationModule.
3. Create "welcome page" (for instance, welcome.jsf). Add a button with fixed action outcome "test".
4. Create test page, for instance, test.jsf. Drag and drop any view object from Data Controls onto the page and create a form with navigation controls. Add a button with fixed action outcome "return".
5. Create bounded task flow, name it "test", drag and drop our test page on it - the page will be the default activity. Add a task flow return activity. Add a control flow case from the default view activity to the return activity, set From Outcome property to "return". So our return button should cause the task flow to exit.
6. Open adfc-config.xml in diagram mode and place our welcome page on it. Then drag and drop the test task flow to create a task flow call activity. Add a control flow case from welcome page to task flow call activity, set the From Outcome property to "test". So our test button should call the test task flow.
7. Configure application to run the unbounded task flow starting with Welcome view activity.
At this point all works as expected: when application runs, the welcome page is displayed with test button. Pressing the test button results in displaying the test page, return button leads back to the welcome page.
Now let's configure ADF Security.
Run the ADF Security configuration wizard, choose ADF Authentication and Authorization.
On the second page select Form-Based Authentication, check the Generate Default Pages flag.
On the third page choose No Automatic Grants.
On the next page keep the Redirect Upon Successful Authentication unchecked. Press Finish.
Open jazn-data.xml to configure roles, users and resource grants:
1. Create application role test-role.
2. Grant the test-role privileges to view the test task flow.
3. Create user and grant him the test-role.
Now we have the public available welcome page and the test page with restricted access.
When application runs, the welcome page is displayed as expected. Pressing the test button redirect us to auto-generated login page. After successful authorization the test page is displayed. But nothing happens if we click now the return button for the first time. When we click the return button once more, the application crushes with Error-500 and message "Target Unreachable, identifier 'bindings' resolved to null". The exact error trace depends on UI control bindings, but looks like this:
javax.el.PropertyNotFoundException: //C:/Users/DUDKIN/AppData/Roaming/JDeveloper/system11.1.2.0.38.60.17/o.j2ee/drs/Test1/ViewControllerWebApp.war/test.jsf @10,120 value="#{bindings.Id.inputValue}": Target Unreachable, identifier 'bindings' resolved to null
at com.sun.faces.facelets.el.TagValueExpression.isReadOnly(TagValueExpression.java:122)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:476)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.getReadOnly(EditableValueRenderer.java:390)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.wasSubmitted(EditableValueRenderer.java:345)
at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.decodeInternal(EditableValueRenderer.java:116)
at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.decodeInternal(LabeledInputRenderer.java:56)
at oracle.adf.view.rich.render.RichRenderer.decode(RichRenderer.java:342)
at org.apache.myfaces.trinidad.render.CoreRenderer.decode(CoreRenderer.java:274)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__rendererDecode(UIXComponentBase.java:1324)
(the rest of lines skipped).
Any suggestions?
Edited by: user13307311 on Apr 16, 2013 11:39 PM@Lovin_JV_941794
The welcome page is public available since it does not have appropriate PageDef file.
Login page comes not from the welcome page, it comes after attempt to access the test page. So after the login succeeded the test page appears, because redirect to welcome page after successful login is not configured. I do not need to return the welcome page at this moment, I need to go to the test page.
It seems the task flow call stack to be destroyed after redirect to login page.
Edited by: user13307311 on Apr 17, 2013 12:45 AM -
Goods receipt with mvt 103 and storage location
Dear All,
I have a requirement. I create a PO and make the GR with mvt 103. I have to use 103 because no accounting document shall be created at the time of goods receipt. Then i will approve it with mvt 105.
Now, my client wants to see the storage location info at the time of GR with 103. But i cannot enter storage location if i use 103. Is there another mvt type that i can use storage location but no accounting document created ? I mean i want to enter storage location when i use 103. is it possible or any other mvt types ?
Thanks in advance..
Best regards,SAP docu explains:
To post all items of a purchase order into goods receipt blocked stock, proceed as described in the section Entering a Goods Receipt for a Purchase Order, but use movement type PO to blocked stock ( 103 ) instead of movement type PO to warehouse (101).
All of the order items are posted into goods receipt blocked stock with movement type 103.
Since the material is not to be added to the inventory yet, do not enter a storage location.
Apart from these differences, you can follow the procedure described in the section Enter Goods Receipt for Purchase Order.
regards,
Lalita -
Reverse timeline conflict with MouseEnter/Leave and Click
Hello everyone !
First, i'm sorry for my bad english, i'm working on it every day
I'm doing a website with Edge Animate and I have a conflict between two actions :
I have a Symbol with a MouseEnter/MouseLeave effect which make visible a text : when i enter in the effect zone the text appear and when I leave it, the text disappear.
I want to set a "Click" action on the same Symbol. When I Click on it i want to play Reverse (like the MouseLeave) then jump to another timeline trigger.
The problem is that make a conflict between the "click" and the "mouseEnter" because both of them are trying to do the exact opposite things. Click make the text disappear and "mouseEnter" make it visible !
How can i deal with that ?
Thank you very much for your time
FélixOk, i will look at mouse events.
Code to display default panel and icon requires a new line.
compositionReady:
// Default Panel: first panel
sym.getSymbol("Concept").play('Over'); // <== new line
sym.getSymbol("Concept_1").getSymbolElement().show();
sym.getSymbol("Concept_1").play("Over");
sym.setVariable("displayedPanel","Concept_1"); -
Help with Apache Reverse Proxy configuration with SAP Portal and SAP Webgui
Dear Experts,
I have an issue configuring Apache to work with SAP Portal and ERP webgui. Accessing Portal through Reverse Proxy is working fine. But the problem arises when we try to open an iView ERP webgui transaction page from Portal with the Reverse Proxy. Have anyone implemented similar requirements and could advice on the configuration required on the Apache side? Thank youhi,
pls check the below links for reference:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24396589-0a01-0010-3c8c-ab2e3acf6fe2
searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
1)Learn to implement the reverse proxy filter and portal gateway in SAP Enterprise Portal 6.0 on Web Application Server 6.40.
https:/.../irj/sdn/nw-portalandcollaboration?rid=/webcontent/uuid/006efe7b-1b73-2910-c4ae-f45aa408da5b
.2 )Configuring the Portal for Your Reverse Proxy Filter Solution . ... This document describes the reverse proxy filter mechanism in SAP Enterprise ...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/32ad9b90-0201-0010-3c8a-c900cd685f8f
3)have full reverse proxy functionality. Possibly. filter. requests. Internet ... Reverse proxy (optionally with authentication etc.) ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c066c390-0201-0010-3cba-cd42dfbcc8be
Note:please reward points if solution found helpfull
Regards
Chandrakanth.k -
Is apple working on a fix so it plays nice with internet security and filtering programs?
Question is in the title.
The conflict that causes us to disable internet security and filtering programs to get iTunes Store to open. Is that planning on being resolved?None of us know, and you won't get an answer from Apple on here. We are users just like you. Although not everyone has problems with that, I know I didn't when I used iTunes on my PC.
-
Problem with ws-security and MTOM
Hi all,
I have seriuos problem with WS-Swcurity and MTOM. When I anebled WS-Swcusriy on WSDl, MTOM messagies have all attachments inline, not as a part of message. Here my WSDL definition:
<wsp:Policy wsu:Id="WSMTOMPolicy">
<wsp:ExactlyOne>
<wsp:All>
<wsoma:OptimizedMimeSerialization
xmlns:wsoma="http://schemas.xmlsoap.org/ws/2004/09/policy/optimizedmimeserialization" />
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsp:Policy name="UsernameToken" wsu:Id="WSSecurityPolicy">
<sp:SupportingTokens>
<wsp:Policy>
<sp:UsernameToken
sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/AlwaysToRecipient">
<wsp:Policy>
<sp:WssUsernameToken11 />
</wsp:Policy>
</sp:UsernameToken>
</wsp:Policy>
</sp:SupportingTokens>
</wsp:Policy>
Does anybody advise for me, some solution of this problem?
Martin@Lovin_JV_941794
The welcome page is public available since it does not have appropriate PageDef file.
Login page comes not from the welcome page, it comes after attempt to access the test page. So after the login succeeded the test page appears, because redirect to welcome page after successful login is not configured. I do not need to return the welcome page at this moment, I need to go to the test page.
It seems the task flow call stack to be destroyed after redirect to login page.
Edited by: user13307311 on Apr 17, 2013 12:45 AM -
I lost my iPad mini while traveling recently. I tried using the Find My iPhone App (which showed my iMac, my iPhones, my old iPad, and my macbook) but the mini didn't show up...probably because it was turned off or the battery ran down.
I still have the original receipt from when I purchased it, showing the article number and the serial number. Is there any way to locate it with that info?No, unless you had Find My iPad enabled on it then there isn't any way to try and locate it.
Have you reported it to the police in case somebody hands it in ? You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc., and if it was a cellular model also contact your carrier. -
Scripting 'Save PSD as PDF with password security' and 'Open PDF with password security' issue.
Hi!
I'm now building an extension for Photoshop. The script (jsx) should save the active document as Photoshop PDF secured with a password. The PW is the same all the time and is set in the script. Then the script is to open the PDF with that same password. I need all this to protect the PDF from opening by a user, so that only the script has access to the file.
I've googled a lot. I've seen a similar topic on this community dated as 2012. It's not answered. With an only comment saying that saving with a password seems to be possible via GUI and not via a script.
Has anything changed since 2012?
P.S. Illustrator .documentPassword and .requireDocumentPassword don't work in PS and ScriptListener still gives nothing :-/ScriptListener still gives nothing
Which probably means the task is (still) not possible to achieve with Photoshop Scripting.
Both Photoshop DOM and AM seem to have weaknesses/omissions that I would consider more relevant but if you regard the issue as crucial you may want to post a Feature Request over at
Photoshop Family Customer Community -
Reverse engineer error with Hyperion Essbase and Planning
We are getting the following error in ODI Operator (3rd step) when trying to reverse-engineer Hyperion Essbase and Planning models. com.microsoft.sqlserver.jdbc.SQLServerException: Cannot invoke a rollback operation when the AutoCommit mode is set to "true".
Our ODI repository resides in SQL Server.. Any help is appreciated. Thanks.Hi Dmitriy,
You should upgrade to the latest patch of ODI available on metalink.oracle.com 10.1.3.4.4.
There was an issue in 10.1.3.4 ODI with the intial reverse when using SQL server. If you shutdown all the ODI UI's and then restart. And then reverse it should work correctly. But you have to make sure you shut down all ODI tools.
Thanks,
Denis -
Can I have 2 routers with different security and broadcast modes off same modem?
Hi
Apologies for not being too technical. The background is that I have a mac and a dell laptop, both of which used to work off a Linksys WRT54G wireless router even though both computers are set up for N routers. I then bought a Logitech Squeezebox internet radio, again working off the Linksys G. The security on all 3 was WEP.
I was then advised to upgrade my router to N and change security to WPA. I bought a Netgear WNR2000 N wireless router as the local shop did not have any linksys n routers. I tried to set up the three devices to this router but it seems that the radio will only broadcast G and WEP security.
It then appeared that I would have to downgrade the other two computers back to G and WEP also and when I did that the internet speed really slowed down.
My query is this, can I set up the Netgear N to be linked to my modem and broadcasting at N and WPA, thus linking my computers at top speed, and then can I link my Linksys to my Netgear and have that broadcast a different network on G/WEP for my radio? If I can or if there is a better solution could someone tell me in easy steps how to do it?
Very much obliged.You don't have to downgrade your router. Just enable mixed mode so it will allow wireless N and G devices to connect to the router. However, it will share the same wireless security mode.
With regards to your query, the answer is yes. You can setup two (2) wireless routers, one providing N and WPA while the other one providing G and WEP. It might be a little complicated though. You have to cascade the routers. Both should have different SSID and channel.
Try this setup first before changing the wireless options. -
How do I send/email Documents with high security and password protected
I want to send Documents securely to my clients. What product do I need and how do I send/email with password protection? I recently purchased Adobe Send but not sure this was the right product needed to send my documents securely?
In Acrobat you can create a Portfolio in which your documents (any types) will be placed as attachments and encrypt the whole portfolio. You can also create a small PDF, possibly with explanation what is in it, attach your files to it, and encrypt this PDF. In this case you can encrypt attachments only, so that the user can open the shell PDF but to extract the files would need to know the password.
-
Dot1x with port security and redundant radius servers
I have a strange issue with my dot1x port authentication. I have two radius servers configured in my switch for redundancy, and on my switchport I have a Cisco IP phone and a PC. Testing redundnacy with the radius servers, when I have both servers active and running, the port authentication works fine for both phone and pc. When I fail the radius servers in the configuration, by disconnecting the NIC on it, the switch goes to the surviving radius server and authenticates, (I can see it in the running log) both the phone and PC get an access-accept, but only the phone works on the network and the port light stays amber showing it's blocking for the pc. Strange, since it showed an accept on the radius server.
This only seems to happen when the first one on the list is failed. When the second one is failed, it obviously won't need to try it, so there's not an issue. Any ideas?
Here's the setup and configs:
freeradius 2.1.12-4
cisco 3560
Switch Ports Model SW Version SW Image
* 1 52 WS-C3560G-48PS 12.2(53)SE2 C3560-IPBASEK9-M
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
interface GigabitEthernet0/1
switchport access vlan 100
switchport mode access
switchport voice vlan 110
authentication event no-response action authorize vlan 901
authentication host-mode multi-domain
authentication port-control auto
authentication periodic
authentication violation protect
mab
dot1x pae authenticator
dot1x timeout quiet-period 10
dot1x timeout tx-period 1
no mdix auto
spanning-tree portfast
radius-server host 10.90.1.88 auth-port 1645 acct-port 1646 key 7 xxx
radius-server host 10.90.1.85 auth-port 1645 acct-port 1646 key 7 xxx
Here's an authentication string from the radius server:
(there are two mac address. The first one 00.13 is the PC and the second 30.37 is the phone)
rad_recv: Access-Request packet from host 10.90.100.7 port 1645, id=204, length=160
User-Name = "001372b639a6"
User-Password = "001372b639a6"
Service-Type = Call-Check
Framed-MTU = 1500
Called-Station-Id = "9C-AF-CA-23-D9-01"
Calling-Station-Id = "00-13-72-B6-39-A6"
Message-Authenticator = 0xfeef777a8033c24934306b3cce78c8f1
NAS-Port-Type = Ethernet
NAS-Port = 50001
NAS-Port-Id = "GigabitEthernet0/1"
NAS-IP-Address = 10.90.100.7
Wed Sep 18 10:48:06 2013 : Info: # Executing section authorize from file /etc/raddb/sites-enabled/default
Wed Sep 18 10:48:06 2013 : Info: +- entering group authorize {...}
Wed Sep 18 10:48:06 2013 : Info: ++[preprocess] returns ok
Wed Sep 18 10:48:06 2013 : Info: ++[chap] returns noop
Wed Sep 18 10:48:06 2013 : Info: ++[mschap] returns noop
Wed Sep 18 10:48:06 2013 : Info: ++[digest] returns noop
Wed Sep 18 10:48:06 2013 : Info: [suffix] No '@' in User-Name = "001372b639a6", looking up realm NULL
Wed Sep 18 10:48:06 2013 : Info: [suffix] No such realm "NULL"
Wed Sep 18 10:48:06 2013 : Info: ++[suffix] returns noop
Wed Sep 18 10:48:06 2013 : Info: [eap] No EAP-Message, not doing EAP
Wed Sep 18 10:48:06 2013 : Info: ++[eap] returns noop
Wed Sep 18 10:48:06 2013 : Info: [sql] expand: %{User-Name} -> 001372b639a6
Wed Sep 18 10:48:06 2013 : Info: [sql] sql_set_user escaped user --> '001372b639a6'
Wed Sep 18 10:48:06 2013 : Debug: rlm_sql (sql): Reserving sql socket id: 3
Wed Sep 18 10:48:06 2013 : Info: [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '001372b639a6' ORDER BY id
Wed Sep 18 10:48:06 2013 : Debug: rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '001372b639a6' ORDER BY id
Wed Sep 18 10:48:06 2013 : Info: [sql] User found in radcheck table
Wed Sep 18 10:48:06 2013 : Info: [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = '001372b639a6' ORDER BY id
Wed Sep 18 10:48:06 2013 : Debug: rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = '001372b639a6' ORDER BY id
Wed Sep 18 10:48:06 2013 : Info: [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = '001372b639a6' ORDER BY priority
Wed Sep 18 10:48:06 2013 : Debug: rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHERE username = '001372b639a6' ORDER BY priority
Wed Sep 18 10:48:06 2013 : Debug: rlm_sql (sql): Released sql socket id: 3
Wed Sep 18 10:48:06 2013 : Info: ++[sql] returns ok
Wed Sep 18 10:48:06 2013 : Info: ++[expiration] returns noop
Wed Sep 18 10:48:06 2013 : Info: ++[logintime] returns noop
Wed Sep 18 10:48:06 2013 : Info: ++[pap] returns updated
Wed Sep 18 10:48:06 2013 : Info: Found Auth-Type = PAP
Wed Sep 18 10:48:06 2013 : Info: # Executing group from file /etc/raddb/sites-enabled/default
Wed Sep 18 10:48:06 2013 : Info: +- entering group PAP {...}
Wed Sep 18 10:48:06 2013 : Info: [pap] login attempt with password "001372b639a6"
Wed Sep 18 10:48:06 2013 : Info: [pap] Using clear text password "001372b639a6"
Wed Sep 18 10:48:06 2013 : Info: [pap] User authenticated successfully
Wed Sep 18 10:48:06 2013 : Info: ++[pap] returns ok
Wed Sep 18 10:48:06 2013 : Info: # Executing section post-auth from file /etc/raddb/sites-enabled/default
Wed Sep 18 10:48:06 2013 : Info: +- entering group post-auth {...}
Wed Sep 18 10:48:06 2013 : Info: ++[exec] returns noop
Sending Access-Accept of id 204 to 10.90.100.7 port 1645
Wed Sep 18 10:48:06 2013 : Info: Finished request 0.
Wed Sep 18 10:48:06 2013 : Debug: Going to the next request
Wed Sep 18 10:48:06 2013 : Debug: Waking up in 4.9 seconds.
Wed Sep 18 10:48:11 2013 : Info: Cleaning up request 0 ID 204 with timestamp +77
Wed Sep 18 10:48:11 2013 : Info: Ready to process requests.
rad_recv: Access-Request packet from host 10.90.100.7 port 1645, id=205, length=160
User-Name = "3037a616cd49"
User-Password = "3037a616cd49"
Service-Type = Call-Check
Framed-MTU = 1500
Called-Station-Id = "9C-AF-CA-23-D9-01"
Calling-Station-Id = "30-37-A6-16-CD-49"
Message-Authenticator = 0xc9173e759dd759b9d414d192783e8a8e
NAS-Port-Type = Ethernet
NAS-Port = 50001
NAS-Port-Id = "GigabitEthernet0/1"
NAS-IP-Address = 10.90.100.7
Wed Sep 18 10:48:13 2013 : Info: # Executing section authorize from file /etc/raddb/sites-enabled/default
Wed Sep 18 10:48:13 2013 : Info: +- entering group authorize {...}
Wed Sep 18 10:48:13 2013 : Info: ++[preprocess] returns ok
Wed Sep 18 10:48:13 2013 : Info: ++[chap] returns noop
Wed Sep 18 10:48:13 2013 : Info: ++[mschap] returns noop
Wed Sep 18 10:48:13 2013 : Info: ++[digest] returns noop
Wed Sep 18 10:48:13 2013 : Info: [suffix] No '@' in User-Name = "3037a616cd49", looking up realm NULL
Wed Sep 18 10:48:13 2013 : Info: [suffix] No such realm "NULL"
Wed Sep 18 10:48:13 2013 : Info: ++[suffix] returns noop
Wed Sep 18 10:48:13 2013 : Info: [eap] No EAP-Message, not doing EAP
Wed Sep 18 10:48:13 2013 : Info: ++[eap] returns noop
Wed Sep 18 10:48:13 2013 : Info: [sql] expand: %{User-Name} -> 3037a616cd49
Wed Sep 18 10:48:13 2013 : Info: [sql] sql_set_user escaped user --> '3037a616cd49'
Wed Sep 18 10:48:13 2013 : Debug: rlm_sql (sql): Reserving sql socket id: 2
Wed Sep 18 10:48:13 2013 : Info: [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '3037a616cd49' ORDER BY id
Wed Sep 18 10:48:13 2013 : Debug: rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '3037a616cd49' ORDER BY id
Wed Sep 18 10:48:13 2013 : Info: [sql] User found in radcheck table
Wed Sep 18 10:48:13 2013 : Info: [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = '3037a616cd49' ORDER BY id
Wed Sep 18 10:48:13 2013 : Debug: rlm_sql_mysql: query: SELECT id, username, attribute, value, op FROM radreply WHERE username = '3037a616cd49' ORDER BY id
Wed Sep 18 10:48:13 2013 : Info: [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = '3037a616cd49' ORDER BY priority
Wed Sep 18 10:48:13 2013 : Debug: rlm_sql_mysql: query: SELECT groupname FROM radusergroup WHERE username = '3037a616cd49' ORDER BY priority
Wed Sep 18 10:48:13 2013 : Debug: rlm_sql (sql): Released sql socket id: 2
Wed Sep 18 10:48:13 2013 : Info: ++[sql] returns ok
Wed Sep 18 10:48:13 2013 : Info: ++[expiration] returns noop
Wed Sep 18 10:48:13 2013 : Info: ++[logintime] returns noop
Wed Sep 18 10:48:13 2013 : Info: ++[pap] returns updated
Wed Sep 18 10:48:13 2013 : Info: Found Auth-Type = PAP
Wed Sep 18 10:48:13 2013 : Info: # Executing group from file /etc/raddb/sites-enabled/default
Wed Sep 18 10:48:13 2013 : Info: +- entering group PAP {...}
Wed Sep 18 10:48:13 2013 : Info: [pap] login attempt with password "3037a616cd49"
Wed Sep 18 10:48:13 2013 : Info: [pap] Using clear text password "3037a616cd49"
Wed Sep 18 10:48:13 2013 : Info: [pap] User authenticated successfully
Wed Sep 18 10:48:13 2013 : Info: ++[pap] returns ok
Wed Sep 18 10:48:13 2013 : Info: # Executing section post-auth from file /etc/raddb/sites-enabled/default
Wed Sep 18 10:48:13 2013 : Info: +- entering group post-auth {...}
Wed Sep 18 10:48:13 2013 : Info: ++[exec] returns noop
Sending Access-Accept of id 205 to 10.90.100.7 port 1645
Cisco-AVPair = "device-traffic-class=voice"
Wed Sep 18 10:48:13 2013 : Info: Finished request 1.
Wed Sep 18 10:48:13 2013 : Debug: Going to the next request
Wed Sep 18 10:48:13 2013 : Debug: Waking up in 4.9 seconds.
Wed Sep 18 10:48:18 2013 : Info: Cleaning up request 1 ID 205 with timestamp +84
Wed Sep 18 10:48:18 2013 : Info: Ready to process requests.
Thanks!802.1X support requires an authentication server that is configured for Remote Authentication Dial-In User Service (RADIUS). 802.1X authentication does not work unless the network access switch can route packets to the configured RADIUS server.
Please check the below links which can be helpful in configurations:
Link-1
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/50sg/configuration/guide/dot1x.html -
Performance problems with Integrated security and ODP
Hi
While testing performance for opening a data base connection, I notice there is a huge performace issue when using externally identified users and ODP with Oracle client 11.1.0.6 and .Net 3.5. The test is running 30 times slower with an externally identified user compared to using a database identified user.
I also noticed that System.Data.OracleClient does not result in any significant performance penalties for externally vs database identified users.
The test environment is Vista 64 and VS2008, and I do not notice any significant difference using 32bit vs 64bit Oracle client.
Is this a known problem and does it exist a workaround for this?
Kind regards
OyvindHi,
I'm assuming you're using 11.1.6.0 ODP, so you'd want to upgrade to 11.1.6.21 or higher ODP. Prior to that, Externally Authenticated connections were not pooled so resulted in a hard connection every time.
If you have 111060 full client installed, applying the 11107 database patch to the cleint install will give you 11107 ODP. Or, you can add the [11106.20 ODAC bundle|http://www.oracle.com/technology/software/tech/windows/odpnet/index.html] into your existing 111060 full client home as well.
Hope it helps,
Greg -
EFS: Access denied even with appropriate certificate and permissions
I have imported the certificate from the server computer to the workstation computer several days ago. So far, every morning the workstation computer is unable to access the server encrypted file for a period of about 1 hour (saying "Unable to open
this file. Access denied"). All the folders can be opened, moved and renamed. After persistently attempting to access it and after verifying the thumbprints match between file and certificate it is able to open the file.
There seems to be a delay between logging in to the workstation computer and the effectiveness of the certificate.
I am new to EFS and would love any help you can give me.Hi,
Did this issue just occur on these EFS file or all file in the server? What's the result when you attempt to access the other file which is not encrypted.
Meanwhile, please use Network Monitor to trace the network activity:
Network Monitor
http://technet.microsoft.com/en-us/library/cc938655.aspx
Karen Hu
TechNet Community Support
Maybe you are looking for
-
How do I transfer my ITunes Library from one computer account to another on the same computer?
I use an outdated Mac OS X version 10.5.8 and since it is outdated, my web browsers like Safari and Google Chrome will no longer use Java or any other software that allows you to go on sites like youtube or any other sites (which is mostly everything
-
IPad doesn't charge all the time
Ipad doesn't charge all the time
-
I regularly use my isight with no problems, however whenever I audio chat using Skype and my isight's inbuilt mic I loose audio after about 15 minutes of chatting. It has happened a number of times now, does anyone else have this issue ?? Any know fi
-
I was curious about what sort of camcorder to buy. I would like to purchase an HDD with a Sd slot. Problem is, I've heard concerns about the JVC GZ-MG555 and Panasonic HDC-SD1 and the SDR-200 having some compatibility issues. Can anyone recommend
-
Dear Friend, I add one Customize Tab in Purchase order using user exit on item level but the name (Description) of that tab its showing 'Customer Data' . that description how we can change ?. Thanks in advance.