RFC Error in Webdynpro Abap...

Hi,
Im Using one FM SRM_DOCUMENT_CHECKIN_VIA_FILE...Inside that Fm it is usng some RFC Connection..while debugging Im getting an internal error in the FM as 'RFC server sapftp cannot be started - 1: Program no longer started via RFC'...
Can Any1 Suggest ME How to resolve it...

Hi Vasavi,
I think this is normal FM, not Remote Enable FM. Check this once. and you are calling from different system.
Thatswhy that error. check your RFC connections once(sm59).
and make sure your FM no where used any GUI related statements like call transaction or call screen.
also check this...
Re: FTP_CONNECT failed for SAPFTP from WD4A to external Server
Re: RFC in Web Dynpro
Cheers,
Kris.

Similar Messages

Error in webdynpro(ABAP) application development

Hi,
I am very new in webdynpro (ABAP) application development. I want to create some application based on webdynpro ABAP for few Z- Report. What is the prerequisite to develop a application based on webdynpro( ABAP ) .Because when I am trying to create application in se80 and giving the related functional model name in wedynpro component field , I am getting the error like Web Dynpro Comp./Intf. ZOS_xxx_FM does not exist. How to proceed further?
Thanks,
Kundan

Hi,
Can you be more clear...
Please refer this link for Personalization-
http://help.sap.com/saphelp_nw2004s/helpdata/en/22/719f42f2ff7e5fe10000000a155106/content.htm
Regards,
Lekha.

Error in Webdynpro ABAP Table Tree

Hi,
I am using Table UI element in Webdynpro ABAP. I am showing data in tree format using element Treebykeytablecolumn.
I have full tree structure loaded in begining of the code so don't need to load child on expansion of key. Since I have data already loaded, am setting attribute CHILDREN_LOADED as true.
First row comes in table perfectly, but on expansion its giving error "The Entered Value Is Not on the List of Valid Values." Please let me know your valuable input on this.
Thanks and Regards,
Praveen.

Hi Shaira,
I have removed all values from table and left only row key and Parent key then also I am getting the same issue. Could you please let me know what kind of data mismatch can be. Please let me know some example, if you have faced this issue.
Thanks and Regards,
Praveen.
Edited by: Praveen Kumar on May 19, 2011 7:17 AM

Timeout error in webdynpro abap

Hi All.
I am navigating between two web dynpro components through inbound/otbound plugs.
I am able to navigate betwwen them for two times the third time I try to navigate it gives the following dump:
Error when processing your request
What has happened?
The URL https://pmpdev01.eu.novartis.net:8443/sap/bc/webdynpro/sap/ywebxx_reporting_comp/ was not called due to an error.
Note
The following error text was processed in the system D32 : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server pesap42_D32_44 and in the work process 3 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system D32 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server pesap42_D32_44 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server pesap42_D32_44 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 200 -u: DHAWASH2 -l: E -s: D32 -i: pesap42_D32_44 -w: 3 -d: 20101015 -t: 093801 -v: ERROR_MESSAGE_STATE -e: User session (HTTP/SMTP/..) closed after timeout
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please help me fixing the same.
Thanks and Regards,
Shilpa Dhawan

HI,
Try to check the parameter : rdisp/plugin_auto_logout
This parameter is to set the timeout of the user context. It may come from this parameter
from here :
http://help.sap.com/saphelp_nw04/helpdata/en/0b/1c7e7abbc311d5993a00508b6b8b11/frameset.htm
Once the timeout interval has expired the user context in the work process is not closed. The user context is closed only after the time interval specified in the profile parameter rdisp/plugin_auto_logout has expired. If rdisp/plugin_auto_logout = 0 is set, the context in the work process is not deleted at all.
regards
A.B.

Regarding error in webdynpro - ABAP

Hi friends,
i got error " Error in generated code,Interface expected after interfaces " while activate the object.Please reply as soon.
Regards
krish

Hi Krish,
Please create an OSS ticket that describes the problem and provides instructions to reproduce it.
Best regards,
Thomas

How to Call the RFC in Webdynpro abap application

Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.

Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit

Webdynpro ABAP application canot be run

Hi,
i done a sample simple webdynpro application in web dynpro ABAP. when i run the application the follwing error is occured in browser. pls help me .................
Error when processing your request
What has happened?
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zz_sampleapp was not called due to an error.
Note
The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20080823 -t: 154355 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Look at this thread
[error in WebDynPro ABAP;

How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)

Hello
We use SRM Server 5.5 with classic scenario.
We want to call RFC in R/3 from webdynpro ABAP.
How can we do that?
We are developing the web report using webdynpro abap.
So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro. So we call the R/3 RFC to display the PR, PO data.
But I tired to call the RFC in R/3, We could not call it.
How to call the RFC from R/3 to SRM, when we use webdynpro abap?
Thank you,
Best Regards,
SH.

Hi
Please look at the following threads as well ->
WebDynpro in SRM
BAPI's /RFC's in SRM
BAPI to Change Shopping Cart by RFC
SRM60 and webdynpro
Webdynpro Services Exception
WebDynpro using BAPI has an error
SRM60 and webdynpro...
SAP uses META Function modules in SRM to get data from R/3 back-end.
For getting Purchase requistion data, use the function modules ->
META_REQUISITION_CHANGE Change purchase requisition
META_REQUISITION_CREATE Create Requisition
META_REQUISITION_DELETE Delete/close purchase requisition
META_REQUISITION_GETDETAIL Display requisition details
META_REQUISITION_GETITEMS Display requisition items
META_REQUISITION_GETRELINFO Get Releasease Info for requisitions
For getting Purchase order data, use the function modules ->
META_PO_CREATE Create purchase order
META_PO_DELETE Delete reservation
META_PO_GETDETAIL Display purchase order details
META_PO_GETITEMS Display purchase order items
META_PO_GETRELINFO Display purchase order release information
Hope this will definitely help. Do let me know.
Regards
- Atul

Error when Interative Adobe Form is called from Webdynpro ABAP.

Hi Experts,
I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
Line: -
The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Line: -
When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
Thanks in Advance.
Regards,
Arun.

Hello,
Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
and especially note 999998
Regards, Otto

Error in opening webdynpro abap application

hi All,
I am facing below issue in opening webdynpro abap application, this is first WDA application in production system, please help me in resolving this issue.
============================================================================
Error when processing your request
What has happened?
The URL http://grp.mysap.pg.com:9500/sap/bc/webdynpro/sap/zgpuvstapp/~ucfLOADING was not called due to an error.
Note
The following error text was processed in the system GRP : A request for server adln5412 has been sent to server adln5411; see Note 1364846
The error occurred on the application server adln5411_GRP_10 and in the work process 3 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system GRP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server adln5411_GRP_10 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 3 in transaction ST11 on the application server adln5411_GRP_10 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: BS6402 -l: E -s: GRP -i: adln5411_GRP_10 -w: 3 -d: 20100929 -t: 140306 -v: ERROR_MESSAGE_STATE -e: A request for server adln5412 has been sent to server adln5411; see Note 1364846
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================================
Edited by: brahmanandam ausali on Sep 30, 2010 4:11 AM

Hi Shibli,
I'm facing the same issue with the POWL only if called from a part of the network outside our country (Italy) so I think it would be a network configuration problem as you suppose. Can you explain us the configuration of the balancer and dispatcher to solve the issue?
Thanks
Mattia

I was gettiing runtime error while executing a Webdynpro-ABAP application

Hi,
I am working on Webdynpro-ABAP and created a ALV report using Service call BAPI method in IDES version. After creating component and designed view and created Webdynpro application. While executing application I am getting some error in explorer.
For any application I am getting same error.
I think some setting in explorer..I am not sure. If yes how can I rectify ?
waiting for quick response.
I am giving details error below what I faced.
Error when processing your request
What has happened?
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zz_00_bapiflight was not called due to an error.
Note
     The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
     The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20091226 -t: 135942 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Best Regards,
BDP

hi
It is the Fully Qualified Domain Name (FQDN) error . Refer SAP online help :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
refer the similar thread :
Problem executing sample Webdynpro application
regards,
amit

Error in consuming RFC Webservice in webdynpro

Hi,
I am trying to consume RFC Webservices in webdynpro.For that i created Z- functional module for availability check.But once i am deploying this application ,all the input fields of the corresponding application are disabled.
The error is like
Exception on execution of web service on destination 'DEFAULT_WS_EXECUTION_DEST' for operation 'ZwrMaterialAvailability' in interface 'ZWebService'
Can someone help me to resolve this error?
Thanks,
Kundan

Hi Saravanan ,
Thanks for your replay.
Once i am testing the WSDL URL in netweaver webservice navigator,it showing an error like like
Cannot download WSDL from http://host name.sap.com:8000/sap/bc/srt/wsdl/sdef_ZWEBSERVICE/wsdl11/ws_policy/document?sap-client=800: It is not allowed to access this service.
But same URL is working fine in browser.It's displaying the XML file.
Can you provide the solution to resolve this error?
Thanks,
Kundan

Runtime error in webdynpro for abap

hi every one,
The ASSERT condition was violated.
in webdynpro abap can any one help . im getting this error when im inserting customer master in KNA1
and also when i m giving name in customer name field its give error as
Unable to interpret RA as a number in case of customer name i m pretty confused can any one help.

Which assert condition was violated? Think of this as a CHECK statement that evaluated as NOT TRUE. Also, are you sure your data elements/domains are correct from customer name? The error fires when you put non-digit characters into numeric fields or NUMC fields.

How to call the rfc in webdynpro abap..?

Dear Experts,
I need to add two numbers using RFC in webdynpro abap.
First we have to give the input then click the submit button.. The result will be shown in next screen with addition of two numbers... Please help me in this...
Thanks.

Calling an RFC Function module in Web Dynpro ABAP is nothing different from Classical ABAP
use Pattern button to call function module and use DESTINATION syntax to specify the RFC destination
http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_II.pdf?PHPSESSID=c528a60bf8857431c0fa6f6595639da7
In Above document, page no 7, there is a wizard for Service call, in that 4th step is select service where
you can specify the function module name and the rfc destination name
Abhi

Error Parameter WI_ID contains an invalid value in webdynpro abap

Hi Experts,
i am working with webdynpro abap and using work flow in my component , here i am getting error and the error is
Parameter WI_ID contains an invalid value .
its showing the error in windows parameter : wi_id and the wi_id is type sww_wiid
and the same parameter i am using in application parameter .
can u suggest me how to use this parameter wi_id in window parameter and application parameter and what the type should be for wi_id parameter.and what the value should be for application parameter wi_id.
her i am giving the complete error details.
please give me the requried information if u porvided screen that will be very useful
The following error text was processed in the system RD1 : Parameter WI_ID contains an invalid value .
The error occurred on the application server S0164SAPDEV2_RD1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: HANDLESTART of program /1BCWDY/BP6P95H8W6B71I7VVRPR==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/BP6P95H8W6B71I7VVRPR==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Thanks & Regards.
khanna

Hi Nawal Kishor Mittal,
thanks for the reply,
i have given the application parameter wi_id with type string also but in 120 client (development) is working fine. when i test in 130 client( testing) its going to dump.
what should be given to application value i given parameter wi_id and what the value should be there.
waiting for reply.
Thanks & Regards.
Khanna.

RFC Error in Webdynpro Abap...

Similar Messages

Maybe you are looking for