RFC in ECC who brings the documents flow of the SD PO

Hello,
I need a RFC in ECC who brings the change documents of the SD PO and Delivery.
There is the function module CHANGEDOCU_CDPOS_READwho bring us this information but it is not a RFC. There are others function modules but we can not call them from ECC via remote function call.
Someone know a RFC in ECC who brings the change documents of the SD PO and Delivery?
Cheers,
Marta

PR -2 qty --> soco -> sc 2 qty --> PO 2 Qty -->changed to PO 1 QTY
status run and clean run well.
still i am looking for this sc 1 qty in the cockpit. Waitinting and waiting...
Muthu
works
sc 2 qty -PO 2 Qty -
po 1 qty -
sc comes to cockpit.
SG:- Stop the get status job . reduce the PO qty 1 from 2 qty thought the sc comes to cockpit. inscrutable.
thanks
Finally, I tried putting 0 in last.. days and running BBP_GET_STATUS_2 in debug mode. From what I see it is looking at all the SC's in the system and trying to update status for each of them. We normally run this job with 30 days on a hourly basis.
Yes. during that time all locks will happen .did you notice in sm12 . no one can perform any activity.
i am looking for dalily updates happened in ECC and it must be updated in SRM - with which variant.
since i ahve some special request .
kindly advise.
How long it took in production . hope it may take lot of time. i am interested to know when do you run this job ? at night no business hours ..since our volume of carts are more...it runs more than 3000 secs in testing envt it self.
Muhtu

Similar Messages

Proforma invoice number is not in the document flow of the order.

Hi all,
I have a doubt , if i create an proforma invoice based on order, and after that i create delivery and billing, i cannot able to see the proforma invoice in the document flow of the particular order. pls guide me on this
Thanks all
Kumi

Hi,
Goto VTLA, and check the UPDATE DOCUMENT FLOW in the copy control
If it is already set , then directly from sales order you can find the Proforma invoice .
Goto the sales order in VA02 and enter into the overscreen and from there check the document flow ( F5), now you can see the Proforma invoices.
regards,
santosh

IDOC user exit to update the document flow of the delivery

Hi all,
Scenario:-
There is an inbound idoc for delivery through which the delivery is getting posted ...while reprocessing the idoc (BD87) i need to update the dates on document flow of the delivery. The date to be updated is coming from the idoc.
I have the function module(RV_DOCUMENT_FLOW_UPDATE_U) to update the document flow but i am not sure in which user exit it can be placed. I tried checking for some exits but nowhere i can find the delivery number to which i need to update through the FM.
I am using the standard idoc with the message type as -DELORD and the basic type as 'ORDERS03'.
Kindly provide user exit where i can use the date coming from the idoc (IDOCDATA) and where i can find the delivery no also.
Thanks,
Neslin.
I have closed the other thread there is no more duplication.

I already checked VEDA0001, but the tables for the delivery is not getting populated as it is processing through BD87(Reprocessing Idoc). Is it advisable to use the export import parameter?. Exporting the idoc data from any of the user exit in VEDA0001 and importing it in some other exit where the vbeln is available.?
Thanks,
Neslin.

Change the document flow, table CRMD_BRELVONAI

Hi experts,
We are using CRM and ISU. For few cases the ISUCONTRACT displayed in the CIC0 is wrong.
I would like to know if it's possible to change the document flow ? (the datas in table CRMD_BRELVONAI).
By transaction ?
by FM ?
Thanks in advance if you could help me.
Regards,
Nicolas.

Nicolas,
Though I myself have not tried deleting any existing Doc Flow, but you can try using the Function Module: CRM_DOC_FLOW_UPDATE_DU.
If you get a better option please share.
Regards,
Shyamak

Confirmation of service in the document flow, where it comes from?

Dear all,
I found a confirmation of service after I picking and posting goods issue, from the document flow.
I just wondering, where it comes from? Or, how can I configure it on or off for display?
(This is a standard ERP system, should not involve in the CRM module)
Thanks,
Edited by: Peng Li on Apr 29, 2008 10:04 AM
Edited by: Peng Li on Apr 29, 2008 10:38 AM

Hi Peng,
This usually happens for inbound deliveries usually happens when a movement type is not found for the relevant item. Please check in the delivery item if a movement type is maintained.
Another possibility is that the material is a non-stock (service) material type for which goods movement are not relevant. Check the material type from the material master.
Regards
Nikhilesh

Idoc user exit to update the document flow of delivery

Hi all,
Scenario:-
There is an inbound idoc for delivery through which the delivery is getting posted ...while reprocessing the idoc (BD87) i need to update the dates on document flow of the delivery. The date to be updated is coming from the idoc.
I have the function module(RV_DOCUMENT_FLOW_UPDATE_U) to update the document flow but i am not sure in which user exit it can be placed. I tried checking for some exits but nowhere i can find the delivery number to which i need to update through the FM.
I am using the standard idoc with the message type as -DELORD and the basic type as 'ORDERS03'.
Kindly provide user exit where i can use the date coming from the idoc (IDOCDATA) and where i can find the delivery no also.
Thanks,
Neslin.
Edited by: neslin on Jul 12, 2010 5:44 PM
Moderator message: cross-post locked.
Edited by: Thomas Zloch on Jul 12, 2010 2:27 PM

Check for the enhancement VEDA0001
Go to smod and refer to the further documentation for the same..
Hope it helps.
Thanks and regards

Table Name to see the Document Flow for Service Order - T. Code IW33?

Hi,
can u advise the Table Name to see the Document Flow for Service Order - T. Code IW33?
Ravi.

Hi,
From SERVICE ORDER you cant get the INVOCIE NUMBER,
You will get the SALES ORDER number for that Service order in QMEL table and fetch the Sales order and then goto VBFA to get the Invoice number for the sales order with the DOCUMENT CATEGORY M.
hope it will serve you.
thanks,
santosh

CRM Table to see the Document Flow

HI,
Is their a Table to find the Document flow in CRM.
With regards,
Selvam T

CDBD_DOC_FLOW
Contains the Header Information for a Business Transaction.
Note:
1. It doesnu2019t store the Business Partner responsible for the transaction. So, to get the Partner No, link it with CRM_ORDER_INDEX.
2. This table can be used for search based on the Object Id (Business
Transaction No).

SharePoint 2013 - Document Set Capture Version History. Does each version captured for each document set keep a copy of all the document stored in the document set?

Hi All,
We have currently encountered an issue where even though version control is turned on in a document library, changes made to the metadata of a document set is not tracked in a version history.
We have found that in order to this a user will need to manually click on the capture version history button.
With this in mind, we are concerned about the impact of this on our storage. The question we have been trying to answer is whether each document set version:
stores the change in metadata of the document set and a copy of all the documents stored in the document set
stores the change in metadata of the document set and a reference to the documents stored in the document set (making use of SharePoint 2013's shredded storage)
The reason we ask this is that if a document set version stores a copy of all the document stored in a document set, a change in one of the fields in the document set could result in the storage used to grow exponentially. e.g. if the document set contains
documents totaling 30MB, and if we have 10 versions of the document set, we could take up 300 MB in the content database for just one document set.
We have tried to some searching around Google but wasn't able to find any answers around this question. Would appreciate some assistance from anyone who has knowledge around how document set version history works.
Thanks in advance.
John

i had a long thing written out, but submit failed. suffice to say it does "2". it only stores the changes with pointers to the documents.
Christopher Webb | Microsoft Certified Master: SharePoint 2010 | Microsoft Certified Solutions Master: SharePoint Charter | Microsoft Certified Trainer| http://tealsk12.org Volunteer Teacher | http://christophermichaelwebb.com

Why do I not get the checkout option when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

No the person who can check out using the link in the email has the same permissions as me. We have looked at all kinds of settings, profile etc and nothing evident can be determined to explain the reason. However, one difference we did notice is that this person does not have a default web browser set and thus when clicking on items to open, it always pops up a dialog box asking which program to use to open it with. This person chooses Adobe Reader and it opens on the Sharepoint server as it should and she gets the checkout option in a dialog box just like clicking on the document in the library. My theory is that this step of choosing the program to open with is interrupting the typical way a pdf file is handled when clicking on URL links to the document, which is…. it is opened as temporary internet file rather than on the Sharepoint server. Hopefully someone can figure this out ☺

I have added the Documents folder to the Dock, however when I save a document it doesn't appear in the Documents folder on the Dock, only the Documents folder in the Finder. Is this a quirk, so am I doing something wrong?

I like having my Documents folder on the Dock so I added the Documents folder from the Finder to the Dock. When I save a document to the Documents folder, the saved document appears in the Documents folder from the Finder and not in the Documents folder on the Dock. Why is this happening? And how can I change this?

newbieAK wrote:
I opened the Finder, selected Documents, then right clicked and selected Add to Dock.
Oooh. I never new that was there.

How can I remove the page number from the first page of the document that is the cover page?

How can I remove the page number from the first page of the document that is the cover page?

If you open the Pages panel, (Window>Pages) you will see thumbnails of your master pages and your document pages. In new documents, there is usually a master called A-Master and one called None. If you drag the thumbnail of the None master onto the thumbnail of a document page, it will apply that master to that page. Presumably, you have made your page numbers on A-Master, so this will usually do the trick. If you have elements on A-Master that you need on the first page, but just not the page number, you can duplicate A-Master (which, by default will give you B-Master, but you can change the names if you like) and remove the page number on the duplicate and apply that to the document page.
It might also be worth noting that you can apply master pages in the fly-out of the Pages panel. Go to the fly-out triangle and go down to Apply Master to Pages…, then select a master to apply and the range of pages (1-8 will give you all 8, 1, 3, 5, 7 will be the odds, 1-3, 4, 6-8 if you want continuous ranges and individual pages).

I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content

I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols. What is going wrong?

You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.

Why do I not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task?

We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
1) When myself and coworkers click on the pdf document in the library, we get the check out option as expected. However when we click on the document
link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option. Why does this happen?????
2) The same thing happens when we click on the document link in the workflow task email; HOWEVER, one of our co-workers does get the
check out option when clicking on the link in the email task. Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ???? We have compared our internet settings and adobe
settings to ours and found no differences.
We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI. Some of us have Adobe Pro X and have the same issues.

Hi,
According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
It will be better if you can descript how you
get the check out option as expected when you click on the pdf document in the library.
Then I upload a
word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
I recommend to use the other type docuemts to check whether the check out option works.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

When typing I will sometimes look at the document and find the curser moved and the typing is going on in a different area. How do I stop that curser movement?

When typing I will sometimes look at the document and find the curser moved. The typing has been happening in the wrong place. How do I stop the curser movement while typing?

You're not the only person asking this question. You might want to read this post, which contains possible solutions, and references support documents:
https://discussions.apple.com/thread/2322020?start=0&tstart=0
Others have the same question as you. Post here if this information answered your question; post also if you have any additional questions!

RFC in ECC who brings the documents flow of the SD PO

Similar Messages

Maybe you are looking for