RFC JCo 3 unable to connect to SAP AS with sapgw01 service
Greetings - help is greatly appreciated.
I have an RFC server that uses JCo 3.0.5 to connect to the SAP Application server. When the RFC server is run from a Unix system the gateway service and port needs to be added to the unix systems /etc/services file. We have two (actually 21) sap systems, one has a gateway service id of sapgw00, the other sapgw01. We added both gateway services with port 3300 to the Unix /etc/systems file and are able to connect to the sapgw00 system but not the sapgw01 system. The sapgw01 system is returning the following error. Without sapgw01 in the /etc/services file we get a different error - so it's doing something.
Thanks in advance
Status: Server FLRFCSRV state changed from [STOPPED] to [STARTED]
>>> Exception error occurred on FLRFCSRV connection null
com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu Apr 29 09:16:10 CDT 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems.
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:10 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1168)
at com.sap.conn.jco.rt.DefaultServer.openConnections(DefaultServer.java:1057)
at com.sap.conn.jco.rt.DefaultServer.adjustConnectionCount(DefaultServer.java:1004)
at com.sap.conn.jco.rt.DefaultServerManager$DispatcherWorker.run(DefaultServerManager.java:299)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:10 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2135)
at com.sap.conn.jco.rt.ServerConnection.accept(ServerConnection.java:380)
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1149)
... 4 more
Caused by: RfcException: [null]
message: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:10 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
at com.sap.conn.rfc.engine.RfcIoControl.error_end(RfcIoControl.java:255)
at com.sap.conn.rfc.engine.RfcIoControl.ab_rfcaccept(RfcIoControl.java:43)
at com.sap.conn.rfc.api.RfcApi.RfcAccept(RfcApi.java:41)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2121)
... 6 more
Status: Server FLRFCSRV state changed from [STARTED] to [DEAD]
>>> Exception error occurred on FLRFCSRV connection null
com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu Apr 29 09:16:12 CDT 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next .
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:12 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 2
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1168)
at com.sap.conn.jco.rt.DefaultServer.openConnections(DefaultServer.java:1057)
at com.sap.conn.jco.rt.DefaultServer.adjustConnectionCount(DefaultServer.java:1004)
at com.sap.conn.jco.rt.DefaultServerManager$DispatcherWorker.run(DefaultServerManager.java:299)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:12 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 2
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2135)
at com.sap.conn.jco.rt.ServerConnection.accept(ServerConnection.java:380)
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1149)
... 4 more
Caused by: RfcException: [null]
message: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:12 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 2
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
at com.sap.conn.rfc.engine.RfcIoControl.error_end(RfcIoControl.java:255)
at com.sap.conn.rfc.engine.RfcIoControl.ab_rfcaccept(RfcIoControl.java:43)
at com.sap.conn.rfc.api.RfcApi.RfcAccept(RfcApi.java:41)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2121)
... 6 more
A startup error occurred - please view the log file for additional information
>>> Exception error occurred on FLRFCSRV connection null
com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Thu Apr 29 09:16:18 CDT 2010.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next .
Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:18 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 3
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1168)
at com.sap.conn.jco.rt.DefaultServer.openConnections(DefaultServer.java:1057)
at com.sap.conn.jco.rt.DefaultServer.adjustConnectionCount(DefaultServer.java:1004)
at com.sap.conn.jco.rt.DefaultServerManager$DispatcherWorker.run(DefaultServerManager.java:299)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.sap.conn.jco.JCoException: (129) JCO_ERROR_SERVER_STARTUP: Could not start server: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:18 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 3
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2135)
at com.sap.conn.jco.rt.ServerConnection.accept(ServerConnection.java:380)
at com.sap.conn.jco.rt.DefaultServer.openConnection(DefaultServer.java:1149)
... 4 more
Caused by: RfcException: [null]
message: Connect to SAP gateway failed
Connect parameters: TPNAME=FLRFCSRV GWHOST=sapd2srv GWSERV=sapgw01
ERROR partner '10.165.67.157:sapgw01' not reached
TIME Thu Apr 29 09:16:18 2010
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 3253
DETAIL NiPConnect2: 10.165.67.157:3300
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 3
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
at com.sap.conn.rfc.engine.RfcIoControl.error_end(RfcIoControl.java:255)
at com.sap.conn.rfc.engine.RfcIoControl.ab_rfcaccept(RfcIoControl.java:43)
at com.sap.conn.rfc.api.RfcApi.RfcAccept(RfcApi.java:41)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.accept(MiddlewareJavaRfc.java:2121)
... 6 more
Hello Sir,
I am a student who is pursuing a project that deals with JCo 3.
I read your question on the forum and think that you have done the JCo stuff and can answer my questions.
Kindly, try to shed some light on following question:
Q1: I simply want to start with connecting my SAP system. I have a user ID and password for the same.
I saw some examples where they use "JCo.createClient(....)" and "JCo.client.connect()" to simply connect the client but
when I type in the code it shows me an error, because they are using package "com.sap.mw.jco" but since I am using JCo3,
I don't have that package instead I have "com.sap.conn.jco" which do not have createClient function.
Q2: By setting the classpath for "sapjco.jar" I was able to compile one of the sample programs but could not run it. Do you
know how to run the SAP JCo program.
Your guidance will be highly appreciated
-Thanks
-Dmukhi
Similar Messages
-
BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD. -
BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds. -
Unable to Connect to SAP through SAPGUI
Dear all,
We have a PI 7.11 dual stac ksystem on Linux, oracle.
we are able to connect to the server through putty, but not able to launch xmanager as it is sayign XDMCP error....
Also unable to connect to SAP through SAP GUI
we are getting wsaewouldblock resource temporarily unavailable
I am connecting to servers through CISCO VPN......
Thanks,
Murali L.[root@PIPROD work]# ps -ef | grep dw
pipadm 2042 23763 0 19:34 ? 00:00:01 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
root 8373 6880 0 19:52 pts/1 00:00:00 grep dw
gdm 17480 17397 0 15:48 ? 00:00:00 /usr/libexec/gdmgreeter --gtk-module=gail:atk-bridge:/usr/lib64/gtk-2.0/modules/libkeymouselistener:/usr/lib64/gtk-2.0/modules/libdwellmouselistener
pipadm 23763 23690 0 17:28 ? 00:00:00 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm 23777 23763 0 17:28 ? 00:00:08 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm 23778 23763 0 17:28 ? 00:00:05 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm 23781 23763 0 17:28 ? 00:00:10 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm 23783 23763 0 17:28 ? 00:00:04 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
pipadm 23786 23763 0 17:28 ? 00:00:03 dw.sapPIP_DVEBMGS00 pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
[root@PIPROD work]# more stderr1
(23762) New Child Process created.
(23762) Starting local Command:
Command: ms.sapPIP_DVEBMGS00
pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
[root@PIPROD work]# more stderr2
(23763) New Child Process created.
(23763) Starting local Command:
Command: dw.sapPIP_DVEBMGS00
pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
Thu Oct 20 17:28:21 2011
DpVmcInit: initialize vmc
DpVmcInit: vm lib loaded
DpVmcInit: vm linked with kernel
DpVmcInit: vm native libs loaded
ICM up and operational (pid: 23775) ***
[root@PIPROD work]# more stderr3
(23764) New Child Process created.
(23764) Starting local Command:
Command: ig.sapPIP_DVEBMGS00
-mode=profile
pf=/usr/sap/PIP/SYS/profile/PIP_DVEBMGS00_PIPROD
NiInit3: NI already initialized; param 'maxHandles' ignored (init=1;par=202;cur=2048)
***LOG Q0I=> NiPConnect2: 172.28.30.45:3300: connect (111: Connection refused) [nixxi.cpp 3142]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 7
(SI_ECONN_REFUSE/111; I4; ST; 172.28.30.45:3300) [nixxi.cpp 3142]
[root@PIPROD work]# more dev_ms
trc file: "dev_ms.new", trc level: 1, release: "711"
[Thr 47613442779232] Thu Oct 20 17:28:21 2011
[Thr 47613442779232] ms/http_max_clients = 500 -> 500
[Thr 47613442779232] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7110
patchlevel 0
patchno 81
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
pid 23762
[Thr 47613442779232] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 23762) [msxxserv_mt. 2174]
[Thr 47613442779232] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 47613442779232] load acl file = /usr/sap/PIP/SYS/global/ms_acl_info
[Thr 47613442779232] MsGetOwnIpAddr: my host addresses are :
[Thr 47613442779232] 1 : [172.28.30.45] PIPROD (HOSTNAME)
[Thr 47613442779232] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 47613442779232] *** ERROR => NiHsLGetHostName: NiPGetHostByAddr failed (rc=-1) [nixxhsl.cpp 527]
[Thr 47613442779232] 3 : [192.168.122.1] 192.168.122.1 (NILIST)
[Thr 47613442779232] MsHttpInit: full qualified hostname = PIPROD
[Thr 47613442779232] HTTP logging is switch off
[Thr 47613442779232] set HTTP state to LISTEN
[Thr 47613442779232] *** I listen to port sapmsPIP (3600) ***
[Thr 47613442779232] *** I listen to internal port 3900 (3900) ***
[Thr 47613442779232] *** HTTP port 8100 state LISTEN ***
[Thr 47613442779232] CUSTOMER KEY: >Z2073759310<
[Thr 47613442779232] build version=711.2009.08.31
[Thr 47613442779232] Thu Oct 20 17:28:35 2011
[Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
[Thr 47613442779232] MsHttpReadUrl2: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
Edited by: Murali Lakkoju on Oct 20, 2011 4:14 PM -
Mensaje: Unable to connect to SAP Business One
SAP marca el siguiente error al abrir, estamos en SAP 8.8 SP0 PL 18 y desde el dia que se realizo la actualizacion a dicho parche a los usuarios les salen 2 ventanas que indican error, mas no hemos dado prioridad alta debido a que pese a que salen cada vez que ingresan a B1 no les ha causado conflicto al trabajar.
La primer ventana dice con titulo XL Reporter : Unable to connect to SAP Bussines One.
No se ha encontrado la clave de busqueda solicitada en ningun contexto de activación activa.
La segunda ventana con titulo Mensaje del sistema: No se puede realizar el upgrade del add-on. El archivo AddOnsLocalRegistration.sbo no coincide con los datos de la base de datos Common del add-on. Consulte SAP 1323680
De esta ventana esta claro lo que se sugiere en la nota de SAP pero hay un archivo que no hemos podido localizar de nombre "AddOnsLocalRegistration.sbo" aprovechando si alguien sabe en que carpeta se ubica se los agradecere.Ese fichero esta localizado en c:archivos de programasapsap business oneAddOnsLocalRegistration.sbo y hay otro que es AddOnsInstall.sbo
Estos ficheros contienen los Addon instalados. Deberías vaciarlos de contenido.
Editas el fichero con el notepad y en la primera línea debes dejar "" y borrar el resto de texto que hay.
Después deberías también borrar en el temporal del usuario la carpeta "SM_OBS_DLL", para esto tecleas en inicio - ejecutar - %temp% y lo localizas facilmente.
Cuando accedas de nuevo a SAP no detectará ningún addon instalado y forzará la desinstalación e instalación de los addon -
XL Reporter error Unable to Connect to SAP Business One DI API
Hi Experts,
Im getting this error on one of our clients' workstations.
They have SAPB1 2005A PL 31.
We've tried uninstalling and reinstalling the DIAPI and the whole client application as well. Same error.
It als gives an error after the initial error that says:
"Security Settings in Microsoft Excel prohibit XL Reporter from running."
Any suggestions?
Thanks!hi jairus,
To fix this XLR error 'unable to connect to SAP Business One DI API', do the following:
1. Go to control panel and uninstall SAP DI API
2. Run %temp%
3. Rename the folder SM_OBS_DLL
4. Go to the patch level package of the patch level you are using and install DI API. If you get a message that the installation already exists, ignore the message and proceed to install DI API.
XLR should work properly.
Best Regards,
David -
Error Starting XL Reporter - Unable to connect to SAP Business One DI API
Hi Experts,
I am getting the error message...
Unable to connect to SAP Business One DI API
[SAP Business One DI API]
Internal error (-8006) occurred [131-183]
...when trying to start XL Reporter on one client PC. Until today, it has been working OK.
What needs to be done?
Thanks
GreigHi Gordon,
I thought that might be the answer. Are there any set instructions for a 'clean' client uninstall?
Thanks
Greig -
Unable to connect to Wi-Fi with password
Hello,
I'm having a slight issue with an iPod and iPad. As the title says, I'm unable to connect to wi-fi with password encryption (WPA2). I don't understand why! I can connect to wi-fi when I take the password encryption off. I've been able to connect to wi-fi previously with password encryption enabled. I live in a complex with three other neighbors. I'd prefer to not leave the encryption off. Does anyone have an idea as to how to solve this problem? I've already tried restatarting the iPod and restarting the wireless router. I tried to forget the network as well on both devices and reconnect them, however, when I try to reconnect them it tells me "unable to connect to the network". I do not wish to do a factory reset for either devices. Also, I'm unsure whether this is related or not, but I just updated my software recently to OS 6.1.2 ...my problem began a day after doing so.
Any feedback would be much appreciated! Thanks in advance. 8]
I have a Netgear WNDR3400 wireless router.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
I would try another encryption but still use encryption. Also try changing the PW.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
INS0009: Unable to connect to the database with user SYS
Hi all,
I'm trying to create an OWB repository with OWB repository assistant (10.2.0.2.) on a 10.2.0.1. database (windows XP platform). I get the following error every time I fill in the connect info for the SYS user:
INS0009: Unable to connect to the database with user SYS. java.sql.SQLException: ORA-01017: invalid username/password; logon denied
I can connect to the database (sqlplus sys/<password>@orcl as sysdba) and the OS user is in the ora_dba group. Also checked the database parameters remote_login_passwordfile (= EXCLUSIVE) and O7_DICTIONARY_ACCESSIBILITY=TRUE.
Does anyone know what the problem is? Any help is appreciated.
Regards,
QuintenOk I found the problem myself, I used the wrong sys password :-(. I thought the password I used to logon in sqlplus was right (sqlplus sys/<password>@orcl as sysdba) but the password doesn't matter when you logon as sysdba! So I altered the password for the user sys and now I can continue the steps of the repository assistant.
Quinten -
Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
Example :
I did a test to browse on their BB
www.cnn.com
they will see below error:
“Unable to connect to the selected mobile data service, please try again later.
If the problem persists please contact your administrator “
However if we use ‘Google’ or ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
We are able to open the CNN website – from the link result search by Yahoo or Google
It’s also applicable to other websites too.
Any idea?Hi thatemailguy,
Are the users on a BlackBerry Enterprise Server?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
TS3274 Unable to connect to wi fi with mini IPad wi fi is working with other IPads?
Unable to connect to wi fi with mini iPad? All other iPads are able to connect. Not sure what to do?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Unable to connect to SAP gateway to RFC server failed(hostname unknow)
Hi All,
I am trying to create a new Model(to connect to SAP R/3 server) using the following steps:
1.Selecting Import Adaptive RFC Model
2.Entering Model name,package,default logical system names
3.Selecting the single server option and giving the details of the SAP R/3 server.
When I try to connect it gives me the following error :
-Connect from SAP gateway to RFC server failed.
Also it mentions :
<b>"ERROR hostname 'sapR3' unknown "</b>
Where <b>sapR3</b> is the entry corresponding to the IP address in the host file.
Further I am able to establish a telnet session using the same hostname in command prompt.
I have searched the Internet for solutions, but I haven't found any yet.Any ideas?
Regards,
Kshitij AgrawalHi,
Please check if the hostname that you specify in the "Reimport Model" GUI of NWDS matches with the application server name specified in your R/3 system.The same can be verified by following three simple steps:
1) Open the SAP LogOn.
2) Choose the server to which you wanted to connect and right click on it to get the "properties" in the context menu.
3) Look for the value entered in the field "Application Server" in the properties window.
Hope this helps. -
Unable to connect to SAP Through LAN
I have installed a new BIW server but i am unable to connect to that sap server thru LAN.
Let me give the IP range of the servers
DEV - 90.0.0.*
PRD - 90.0.0.*
BIW DEV - 90.0.0.* (New BIW server which i am unable to connect)
i am able to connect to DEV and PRD from BIW DEV server. but not vice versa
I tried to ping the BIW IP Address from router machine and i am able to ping.
We have a Router machine. I don't know if i have to add any entry in routtab. I already have p*** in routtab.
Also i am unable to connect to biw dev using router string from external network but able to connect to DEV and PRD.
It will be great if anyone give suggesion to resolve this Issue.
Regards
PrakashThanks for your reply!!
According to the instructions mention in the link, i ran the test everything was fine..
i ran the self test and i got self test OK.
In the biw server Host file i mentioned the IP address and host name of the biw server and DEV and PRD.
Still unable to connect to BIW Server thru LAN.
when i tried saprouter -r command in the router machine, it gives this error
"routab cannot open './saproutab': EXIT PROGRAM!!!
<running without saproutab is no longer supported for security reasons>
Could not open permission table"
Please guide me what else can be done.
Thanks
Regards
Prakash
Edited by: Praxbasis on Aug 12, 2009 7:19 PM -
Unable to connect to "SAP Table, Cluster, or Function" in Crystal reports.
I cannot connect to "SAP Table, Cluster, or Function" in Crystal reports. The system gives such an error: Database Conection Error: Functional module "/CRYSTAL/GET_OSQL_OBJECT_LIST" not found.
Did anyone get this error? What can't be wrong with my system?Hi Sergey,
you must import some transports in your SAP R/3 system before you can access its tables. Have a look at the documentation of the int.KIT for SAP.
The transports are normally to be found in the install directory of your server installation of the BOBJ int.KIT for SAP. In the documentation is easy to identify those which must be imported depending on the system's type and version.
Regards,
Stratos -
Unable to connect to SAP business one through web service
Hi
I'm facing some problem with my web service. I tried to connect to SAP but it gave me an "System.Exception"
Public Function ConnectedToDatabase() As Boolean
Try
Dim oCompany as SAPbobsCOM.Company
oCompany = New SAPbobsCOM.Company
Dim lRetCode, lErrCode As Long
Dim sErrMsg As String
sErrMsg = ""
Session("g_server") = System.Configuration.ConfigurationManager.AppSettings("Server")
Session("g_companyDB") = System.Configuration.ConfigurationManager.AppSettings("CompanyDB")
Session("g_DBUserName") = System.Configuration.ConfigurationManager.AppSettings("DbUsername")
Session("g_DBPassword") = System.Configuration.ConfigurationManager.AppSettings("DbPassword")
Session("g_Username") = System.Configuration.ConfigurationManager.AppSettings("Username")
Session("g_Password") = System.Configuration.ConfigurationManager.AppSettings("Password")
oCompany.Server = Session("g_server")
oCompany.CompanyDB = Session("g_companyDB")
oCompany.DbUserName = Session("g_DBUSerName")
oCompany.DbPassword = Session("g_DBPassword")
oCompany.UserName = Session("g_Username")
oCompany.Password = Session("g_Password")
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
lRetCode = oCompany.Connect()
When the codes runs to the line IRetCode = oCompany.Connect(), it will return an error code -8006. Those session got the correct information from the web.config. Then exception is throw in.
I try restarting my com and restarting my suite manager. Usually this will solve the problem. However, it won't for this time. I hope will receive some solutions for my problem. Thanks for your time.Hi,
Try To Set the db server type to MS SQL 2005 (value 4)
oCompany.DbServerType = BoDataServerTypes.dst_MSSQL2005
or
oCompany.DbServerType = 4
and
oCompany.UseTrusted = False
Regards,
János
Maybe you are looking for
-
How can you save a customized Web Gallery in CS4 Bridge?
While trying out some the Web Galleries in CS4 Bridge, I have customized several using the customizing options. The info I type in is saved automatically but if I change from one gallery to another, all the customized choices for colors, etc., return
-
PDF Portfolio combatibility with apple and accessibility
Our office thought PDF portfolios were the way to go for our large manuals that we want available online for readers to view and print. We are running into many problems, however. 1. Are PDF portfolios truly accessible to screen readers? I set the pr
-
hello, i try to create view from 2 users schema , but i get : SQL Command: CREATE OR REPLACE FORCE Failed: Warning: הביצוע הושלם עם אזהרה if i run the select statement without the first line ( create or replace... ) i see the data i ask for... how i
-
Editing a PDF in preview (os x 10.8)
I am editing a PDF in preview (os x 10.8) and I want to add a text box with a fill. I can change the text color, but the fill option is greyed out. how do I change the fill of the text box?
-
How to handle errno in native function?
How to get the correct errno in a native function? I'm using Unix message queues in my native methods and I always get the errno = 0 (it should be ENOMSG = 35) returned when the desired message is not yet available (calling msgrcv with IPC_NOWAIT set