RFC metadata change: how to refresh?

Hi everybody
I have a RFC in my model. If, after import, its metadata are changed, the new in/out parameters are ignored by VC.
How can I workaround this problem (i.e. cache refresh, force metadata import again, ...) without renaming the RFC?
Thanks
Vincenzo

Hai ,
I have an simillar problem even i changed my options to get latest . so i request to change the bapi name and reimport in to Vc then New updated bapi imported . but sometimes using get latest automatically bapi will be updated wht ever u change . so try get latest otherwise change bapi name and reimport ur problem will be solved .
Regards,
venkat

Similar Messages

How to refresh XI RFC Metadata Repository?

Hi everyone,
I would like to know how to refresh the XI RFCadapter Metadata Repository.
I had a scenario RFC(R/3) -> XI -> Legacy System. I made some changes in RFC on R/3 environment, adding some fields, but unfortunately these fields are not appearing in XI.
I imported and activated the RFC in "Design:Integration Builder" but XI still not receiving these new fields.
Thanks for your attention.
Best Regards,
Gabriel Santana
Message was edited by: Gabriel Sant'Anna

Hi,
Thank you for your replies.
Chris, I followed the guide you sent me, very helpful, but unfortunately when I tried to realize "Single Repository Object Cache Refresh" to object type "AdapterMetaData", the following error appeared:
Method fault! Message : Plain exception:null com.sap.guid.GUIDFormatException at com.sap.guid.GUID.parseHexGUID(GUID.java:814) at com.sap.guid.GUIDGenerator.parseHexGUID(GUIDGenerator.java:111) at com.sap.aii.utilxi.misc.api.GUIDFactory.parseHexGUID(GUIDFactory.java:120) at com.sap.aii.ibrep.server.abapcache.HmiMethod_CacheRefresh.process(HmiMethod_CacheRefresh.java:62) at com.sap.aii.ib.server.hmi.HmiServiceImpl.invokeMethod(HmiServiceImpl.java:132) at com.sap.aii.ib.server.hmi.HmiServer.process(HmiServer.java:248) at com.sap.aii.ib.sbeans.hmi.HmiBean.process(HmiBean.java:62) at com.sap.aii.ib.sbeans.hmi.HmiLocalLocalObjectImpl10.process(HmiLocalLocalObjectImpl10.java:144) at com.sap.aii.ib.web.hmi.HmiServlet.processRequestByHmiServer(HmiServlet.java:281) at com.sap.aii.ib.web.hmi.workers.ExternalClient.doWork(ExternalClient.java:78) at com.sap.aii.ib.web.hmi.HmiServlet.doWork(HmiServlet.java:560) at com.sap.aii.ib.web.hmi.HmiServlet.doGet(HmiServlet.java:704) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37) at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Stack trace: com.sap.aii.utilxi.hmi.api.HmiMethodFault: Plain exception:null com.sap.guid.GUIDFormatException at com.sap.guid.GUID.parseHexGUID(GUID.java:814) at com.sap.guid.GUIDGenerator.parseHexGUID(GUIDGenerator.java:111) at com.sap.aii.utilxi.misc.api.GUIDFactory.parseHexGUID(GUIDFactory.java:120) at com.sap.aii.ibrep.server.abapcache.HmiMethod_CacheRefresh.process(HmiMethod_CacheRefresh.java:62) at com.sap.aii.ib.server.hmi.HmiServiceImpl.invokeMethod(HmiServiceImpl.java:132) at com.sap.aii.ib.server.hmi.HmiServer.process(HmiServer.java:248) at com.sap.aii.ib.sbeans.hmi.HmiBean.process(HmiBean.java:62) at com.sap.aii.ib.sbeans.hmi.HmiLocalLocalObjectImpl10.process(HmiLocalLocalObjectImpl10.java:144) at com.sap.aii.ib.web.hmi.HmiServlet.processRequestByHmiServer(HmiServlet.java:281) at com.sap.aii.ib.web.hmi.workers.ExternalClient.doWork(ExternalClient.java:78) at com.sap.aii.ib.web.hmi.HmiServlet.doWork(HmiServlet.java:560) at com.sap.aii.ib.web.hmi.HmiServlet.doGet(HmiServlet.java:704) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37) at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) at com.sap.aii.ibrep.server.abapcache.HmiMethod_CacheRefresh.process(HmiMethod_CacheRefresh.java:68) at com.sap.aii.ib.server.hmi.HmiServiceImpl.invokeMethod(HmiServiceImpl.java:132) at com.sap.aii.ib.server.hmi.HmiServer.process(HmiServer.java:248) at com.sap.aii.ib.sbeans.hmi.HmiBean.process(HmiBean.java:62) at com.sap.aii.ib.sbeans.hmi.HmiLocalLocalObjectImpl10.process(HmiLocalLocalObjectImpl10.java:144) at com.sap.aii.ib.web.hmi.HmiServlet.processRequestByHmiServer(HmiServlet.java:281) at com.sap.aii.ib.web.hmi.workers.ExternalClient.doWork(ExternalClient.java:78) at com.sap.aii.ib.web.hmi.HmiServlet.doWork(HmiServlet.java:560) at com.sap.aii.ib.web.hmi.HmiServlet.doGet(HmiServlet.java:704) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37) at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162) Root cause : null
Details: No details available
My path for this service is:
http://mslsr08:50000/rep/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=RM&type=AdapterMetaData&guid0=&guid1=
How could I solve this issue and finally refresh the cache?
Best Regards,
Gabriel Santana

How to refresh cache for hostname used in RFC Dest

Hello @all,
does anyone knows how to refresh the cache where (for example) the hostnames used in ABAP RFC Destinations are stored? I'm getting an error "Details: NiHsLGetNodeAddr: hostname cached as unknown" when I try to test my generated Trusted RFC Destination...
Thanks in advance for any help!
Kind Regards, Falk

Hi Nilesh,
unfortunately the solution does not work. Still I get the following error while testing the RFC Destination:
DETAIL: NiPGetHostByName: hostname 'MHPAEAFC' not found
Two things have been done.
1. an entry within /etc/resolv.conf for the host mhpaeafc
2. an entry within the hosts-file containing the IP adress, hostname and FQDN
Do you have any idea why the SAP system still is not able to resolve the hostname?
We tried 'ping' and 'nslookup' on the operating system hosting the SAP system with the result that the host can be resolved.
Thanks for any help/hint.
Best regards, Falk

How to Refresh JTree if a file System got changed during Run-time

Hi,
Can anyone tell me how to refresh a JTree(javax.swing.JTree) used for displaying file system(both local and remote).
I'm getting a problem if a file/directoy is added to the file system, after my Applet is loaded. Actually, i have used DefaultTreeModel's reload() method for refreshing and calling it inside SwingUtilities.invokeLater() using Thread, but its not working.
I want that the tree should reflect the latest Files/Directories on the click of a node, if any file or directory is added under that node.
Plz tell me if this is possible or not.
Thanks

Hi Shay_te,
Thanx for ur reply as i was eagerly waiting for the one.
but the example is using the TreeTable
and i have used JTree and DefaultTreeModel.
I'm calling reload(node) within treeExpand() method
Then, i'm regestring addTreeModelListener() as
m_model.addTreeModelListener(new javax.swing.event. TreeModelListener(){ }
inside which all 4 methods are over-ridden
code snippet is as follows so plz help me and tell if this the right way:
class DirExpansionListener implements TreeExpansionListener{
        DirExpansionListener(){
        public void treeExpanded(TreeExpansionEvent event) {
            final DefaultMutableTreeNode node = getTreeNode(event.getPath());
            final FileNode fnode = getFileNode(node);
            Thread runner = new Thread() {
                public void run() {
                    if (fnode != null && fnode.expand(node)) {
                        Runnable runnable = new Runnable() {
                            public void run() {
                                try{
                                   m_model.reload(node);
                                    m_model.addTreeModelListener(new javax.swing.event.TreeModelListener() {
                                        public void treeNodesChanged(javax.swing.event.TreeModelEvent evt) {
                                        public void treeStructureChanged(javax.swing.event.TreeModelEvent evt) {
                                            System.out.println("Path of node changed->"+evt.getTreePath());
                                        public void treeNodesInserted(javax.swing.event.TreeModelEvent evt) {
                                            System.out.println("Nodes Inserted method called..");
                                        public void treeNodesRemoved(javax.swing.event.TreeModelEvent evt) {
                                    System.out.println("Run inside DEvent called..");
                                    //Thread.sleep(500);
                                    //fnode.expand(node);
                                }catch(Exception e){System.out.println("err :" +e);}
                        SwingUtilities.invokeLater(runnable);
            runner.start();
        public void treeCollapsed(TreeExpansionEvent event) {}
    Please reply...

How to change the UWL refresh rate for all portal users.

Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.

1.      Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
      From the Universal Worklist Systems, choose the system for which you want to edit the properties.
    Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju

Why does the Date Created metadata change when images are exported?How do I stop it from changing?

why does the Date Created metadata change when images are exported? How do I stop it from changing? I must have a prefernce set up wrong.

I don't know what OS you are using, or what application you are using to view the data about your exported files, but on Windows and using Windows Explorer the "Date Created" field relates only to the date that the exported file was created, i.e. if viewed immediately after export it will show the date created as being the same date. In order to view "Capture Date" in something like Explorer, you first have to ensure you have included the Metadata as Conrad outlined above, then you have to adjust the display properties of Explorer to show the "Date Taken" field. Here is an example, part of a folder I exported back on March 3rd, note the difference between that last two dates:

How to refresh MessageChoice in advanced table on LOV change?

I have an advanced table for data entry. One column has Employee Name, which is an LOV. Another column is a MessageChoice, listing eligible elements for that person. Everything works fine when the page is first loaded. This is the code I'm using in processRequest to set up the MessageChoice: The MessageChoice is set up using a PicklistViewDefinition (not instance) as each row has to have different selections.
OAAdvancedTableBean table = (OAAdvancedTableBean)webBean.findChildRecursive("TimeEntryTbl");
OAMessageChoiceBean elePoplist = (OAMessageChoiceBean)table.findChildRecursive("ElementSelect");
elePoplist.setListVOBoundContainerColumn(0, table, "EmployeeGroupName");
elePoplist.setListVOBoundContainerColumn(1, table, "PeriodEndDate");
elePoplist.setListVOBoundContainerColumn(2, table, "AssignmentId");
elePoplist.setPickListCacheEnabled(false);
The problem is when a new row is added, initially the poplist will be empty, which is expected. After choosing a value from the Employee LOV, the AssignmentId (which is a FormValue) will be populated. At this point, I need the Poplist to refresh to get the correct list of elements. I'm not sure how to make the poplist refresh. In ProcessFormRequest, I have:
if (pageContext.isLovEvent())
String lovInputSourceId = pageContext.getLovInputSourceId();
System.out.print("lovsource=" + lovInputSourceId);
And it prints the correct lov source. The dev guide says you can invoke an AM method there... but what should the AM do? I'm not sure how to refresh a poplist for a specific row when it is defined in an advanced table with Bound container columns, using a picklist view definition.

I looked through that thread, but nothing in there seemed to really directly address my problem. The solutions in there seemed to be to make view instances instead of using the bound container columns.
But, to answer my own question, I think I found the solution, which so far seems to be working ok...
if (pageContext.isLovEvent())
String lovInputSourceId = pageContext.getLovInputSourceId();
if ("PersonSelect".equals(lovInputSourceId))
pageContext.setForwardURLToCurrentPage(null, // no parameters to pass
true, // retain the AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
Which basically just refreshes the page so all the MessageChoice fields are re-populated based on the latest information in the row. No need to automatically re-execute any VOs and let's OAF do it's own thing to maintain them.

How do I get Bridge and Lightroom to respect - read - metadata changes?

I cull my wedding images in Bridge (CS 6) and then export them into LR 4. I typically rate images as I'm culling, but when I import those images into LR, the ratings don't carry over. Likewise, when I label images in LR and export them, Bridge shows all the color labels as white - regardless of which label was actually assigned.

Lr saves all edits and any other metadata changes in its database (= the catalog).
Additionally to the catalog you can <save to file>,i.e. to a xmp-file (in case of a Raw photo), or in the header (but not in the image pixels!) of a JPG, TIFF, or PSD.
Saving to file is done by
_ either checking the box <Automatically save changes to xmp> in >Edit >Catalog Settings >metadata tab, or manually
_ by going >Metadata >Save metadata to file (in Lr Library Module), or
_ by going >Photo >Save metadata to file (in Develop Module.
When you save manually to file you can select multiple photos in the Grid Mode and do <Save metadata to file>.
This saving to file is necessary in order that Bridge can read and display the Lr edits because Bridge cannot read the Lr catalog.
Bridge saves to file automatically (there is no option of deselecting it) and Lr will read the metadata from Bridge when you import the image into Lr.
In case of an image that is already in Lr you have to select >Metadata >Read metadata from file (in Lr Library Module), or
by going >Photo >Read metadata from file (in Develop Module). Without this <Read metadata from file>, Lr will not display any changes made in Bridge after the import into Lr. Since this <read metadata from file> would overwrite any different edits you may have done in Lr, it is best to do this before you do further edits in Lr.
The rating stars should transfer from Bridge to Lr and vice versa without problems.
For the color labels to transfer correctly you have to make the textual descriptions for the individual colors identical in Lr and in Bridge - down to upper/lower case, commas, hyphens, underscores, etc.
Having said this:
I would recommend that you do not use Bridge for culling your images. You can do the culling just as easy in Lr. When you manage photos in Bridge and in Lr, you will always have the problem of synchronizing the metadata. This can be done but it needs a meticulous workflow that is adhered to strictly.
There is nothing in Bridge that Lr cannot do *). Make your life easier and choose Lr as your only image management and editing tool, except for CS6 itself (I mean Photoshop itself, not the ACR ).
*) Well there is one thing: Since Lr is not a browser-based program it does not automatically "see" what is on a hard drive. Photos need to be imported in order that Lr will "see" them.
Bridge is browser-based. Whatever photo is on a hard drive - irrespective of which program put it there - it will be "seen" by Bridge.
So Bridge is a valuable tool if a photo is not displayed in Lr and you want to check if it is in a particular folder.

Logical systems for modeldata and RFC metadata

Hi All,
I want to know how I can display the my own created logical system names under the drop-down menu when i have to select the logical system names for modeldata and rfc metadata. I don't want to them to be written instead i want them to be one of the options in the drop down menu, as we have them in the FLIGHT_LIST_INIT example found in the sample applications and examples.
Thanks in advance
Srikant

Hi,
While creating SLD for your R/3 systems give the desired name of wht u want instead of logical name.
For configuring the same refer the link below :-
http://help.sap.com/saphelp_erp2004/helpdata/en/29/e0b75c2b7d40c5bfbda82e905b701c/frameset.htm
Regards,
guru

How to refresh/initialize sy-tabix in a loop?????

Dear all,
Please do let me know how to refresh/initialize 'sy-tabix' for every new document in a loop statement.
Thanx in advance.
Alok.

Never try to refresh or initialize system variable. It shall always lead to errors in the programs. For this I have an alternative way below.
Please declare a variable for e.g
data: <b>l_count</b> type sy-tabix.
Inside loop you can write the code like this:
say for eg. you need to refresh l_count for every new material.
Loop at itab.
on change of itab-material.
clear : l_count.
endon.
l_count = l_count + 1.
endloop.
Hope this clarifies your issue.
Lakshminarayanan

How-To "Refresh a table of data after inserting or deleting"

I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
(http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
Priit

Hi
Thanks for your infos.
Yes exactly I use almost the same code you have post here.
Could You answer to my next questions?
First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
Code in backing_bean is and comments on difference to Your code is below:
public commandButton2_action1(){
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("removeEntity");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
//above remove entity, but I dont now if it do commit to database? So i do it below
OperationBinding commit1 = bindings.getOperationBinding("Commit");
commit1.execute();
//and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
requery.execute();
return null;
Page Definition code for this:
<methodAction id="findAllRezerwacja1"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
RequiresUpdateModel="true" Action="999"
ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
<table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
<AttrNames>
<Item Value="dataDo"/>
<Item Value="dataOd"/>
<Item Value="idRezerwacja"/>
<Item Value="liczbaUczestnikow"/>
<Item Value="prowadzacy"/>
<Item Value="uwagi"/>
</AttrNames>
</table>
<methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="removeEntity"
RequiresUpdateModel="true" Action="999">
<NamedData NDName="entity"
NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
NDType="java.lang.Object"/>
</methodAction>
<action id="Commit" IterBinding="findAllRezerwacja1Iter"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" RequiresUpdateModel="true"
Action="2"/>
</bindings>
//and rest of code for Iterator etc
My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
Thanks

How to refresh the textedit object in module pool

Hi All,
I would appreciate if anybody can solve my problem.
Problem is i have created one TEXTEDIT and now when user clicks on the cancel button and come back to the screen the data which was previously entered is still coming up.
Please tell me how to refresh the data in TEXTEDIT.

actualy it is enough to do the following, assuming you have a container to put the textedit into it:
DATA: l_parent_container TYPE REF TO cl_gui_custom_container,
         l_obj_editor TYPE REF TO cl_gui_textedit, "make this a global variable
         l_text_table TYPE re_t_textline,
         l_itftext TYPE STANDARD TABLE OF tline,
         l_thead TYPE thead.
l_parent_container = ... "your container
move .... to l_thead...    "your text header to read or reread
read text from SO10
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      id                      = l_thead-tdid "Text-ID
      language                = l_thead-tdspras "im_request-language?
      name                    = l_thead-tdname "TDIC Text-Name
      object                  = l_thead-tdobject "Texte: Anwendungsobjekt
    TABLES
      lines                   = l_itftext
    EXCEPTIONS
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      OTHERS                  = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
convert itf text to stream text (SAPSCRIPT_DEMO_NOTE_EDITOR)
CALL FUNCTION 'CONVERT_ITF_TO_STREAM_TEXT'
    TABLES
      itf_text    = l_itftext
      text_stream = l_text_table.
IF l_obj_editor IS INITIAL.
    CREATE OBJECT l_obj_editor
        EXPORTING parent = l_parent_container. " Abstract Container for GUI Controls
ENDIF.
discard any previous changes
l_obj_editor->set_textmodified_status( cl_gui_textedit=>false ).
übertragen text in editor
CALL METHOD l_obj_editor->set_text_as_stream
    EXPORTING
      text            = l_text_table
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2.

How to Refresh a Single Graphic based on Time of Day

On this Muse Developed Website, HOME | The Great American Car Wash, The traffic light is programmed to change to Red when the business is closed and to green when it opens. The code that I wrote incorporates this meta tag:
<meta http-equiv="refresh" content="5"/>
This refreshes the entire page every 5 seconds. The page blinking as it refreshes is undesirable. My best temporary fix is to change the refresh rate to 2 minutes. I have it tentatively set to 5 seconds for troubleshooting. It will be set to 30 seconds when it is time to publish the site.
I used the "INSERT HTML" command in Muse to add the code. It works as intended, except for the annoying page blink to refresh the traffic light. The business owner could easily tolerate a traffic light blinking on refresh.
Is there a way to just refresh only the graphic? Or is there a better way to automatically "update" the status of the light?
Thanks.
"Cincinnati"

You can try the suggestions mentioned here :
http://stackoverflow.com/questions/17886578/refresh-part-of-page-div
http://crunchify.com/how-to-refresh-div-content-without-reloading-page-using-jquery-and-aj ax/
Thanks,
Sanjit

How to Refresh "Internal table values" in User EXIT.

Dear All,
My requirement is to place some checks in exit ZXQQMU20 in different tabs from the TCODE IW21 . IW22 etc.
Now after placeing the checks towards the different tabs while doing "NOCO" from IW21 the conditions are fullfilled but
when i go ahead to modify the created "NOCO " from the TCODE IW22 by deleting the created values and saving in IW22 , the conditions written in the exit are still satisfied eventhough i have deleted the values in IW22.
The reason for this is that the tables which are there in the exit ZXQQMU20 T_VIQMFE , T_VIQMUR , T_VIQMMA
still contains the old values which were there at the time of creation of "NOCO" in IW21 .
How to refresh my " internal tables values" used in such that even at the time of modification of the NOCO through IW22 my table values should pick the current screen values and not the values which were there at the time of creation.
Please help.
The code i have written in the exit is as below:-
********************* Changed vide ******START
*****IW21 IW22 also added in filter criteria of notification *************
******The purpose of this modification is that in the execution of IW21 or IW22 or IW24 or IW25 we have to give a check that if the
******notification type is M2 than inside the Transaction screen , if the Breakdown duration comes less than 15 min than there are
******no issues but if the breakdown duration is more than 15 min than the mandatory fields needs to be entered in the analysis tab.
**    The user has to fill up either following mandatory fields in Analysis Data tab.
**    A. Object Parts & Damages sub tab
**    Code Group - Object Parts (OTGRP, VIQMFE)
**                          AND
**    Code Group - Problem / Damage (FEGRP, VIQMFE)
**    Or
**    Notification Item Short Text (FETXT, VIQMFE)
**   B. Cause sub tab
**    Code Group # Causes (URGRP, VIQMUR)
**    Or
**    Cause Text (URTXT, VIQMUR)
**   C. Action Taken sub tab
**    Code Group # Activities (MNGRP, VIQMMA)
**    Or
**    Activity Text (MATXT, VIQMMA)
**            Then, allow user to complete notification (NOCO).
CLEAR : L_VAR , L_COMP_TIME.
IF ( SY-TCODE EQ 'IW21' OR SY-TCODE EQ 'IW22' OR SY-TCODE EQ 'IW24' OR
      SY-TCODE EQ 'IW25' ).
   IF ( E_VIQMEL-IWERK = '061' ) OR ( E_VIQMEL-IWERK = '062' ).
     IF E_VIQMEL-QMART = 'M2'.
       L_VAR = E_VIQMEL-AUSZT.
       L_COMP_TIME = L_VAR / 60.
       IF L_COMP_TIME < 15.
         EXIT.
       ELSEIF L_COMP_TIME > 15..
*         IF ( T_VIQMFE-OTGRP IS INITIAL AND T_VIQMFE-FEGRP IS INITIAL ) OR ( T_VIQMFE-FETXT IS INITIAL ) .
*           MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
*         ENDIF.
         IF T_VIQMFE-OTGRP EQ '' OR T_VIQMFE-FEGRP EQ ''.
           IF T_VIQMFE-FETXT EQ ''.
             MESSAGE 'Please fill the mandatory analysis data in Object Parts' TYPE 'E'.
           ENDIF.
         ENDIF.
         CLEAR L_TAG.
         IF T_VIQMUR[] IS INITIAL.
           MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
         ELSE.
           LOOP AT T_VIQMUR.
             IF T_VIQMUR-URGRP IS INITIAL .
               IF T_VIQMUR-URTXT IS INITIAL.
                 L_TAG = 'X'.
               ENDIF.
             ENDIF.
           ENDLOOP.
           IF L_TAG = 'X'.
             MESSAGE 'Please fill the mandatory analysis data in Cause tab' TYPE 'E'.
           ENDIF.
         ENDIF.
         CLEAR L_TAG.
         IF T_VIQMMA[] IS INITIAL.
           MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
         ELSE.
           LOOP AT T_VIQMMA.
             IF T_VIQMMA-MNGRP IS INITIAL .
               IF T_VIQMMA-MATXT IS INITIAL.
                 L_TAG = 'X'.
               ENDIF.
             ENDIF.
           ENDLOOP.
           IF L_TAG = 'X'.
             MESSAGE 'Please fill the mandatory analysis data in Action' TYPE 'E'.
           ENDIF.
         ENDIF.
       ENDIF.
     ENDIF.
   ENDIF.
ENDIF.
<Added code tags>
Thank you so much in advance..
-Sudhish
Please use the code tags when you're posting any code snippet
Edited by: Suhas Saha on Jul 13, 2011 12:39 PM

Hi, I was thinking just like XVBAP and YVBAP values in the USEREXIT_SAVE_DOCUMENT.
Plz check u have x /y versions or tables like _old/ _new suffixes and then move the value accordingly.
otherwise there may be inconsistency.
Edited by: Prasenjit S. Bist on Jul 13, 2011 3:03 PM

Import from Catalog- Why is metadata changing?

Whenever I run Import from Catalog (going from portable drive to desktop), the dialog box shows several photos that have been "modified," even though I haven't touched them since they were last imported to the desktop. I'm guessing, the desktop install of LR is finding metadata changes in some files. In fact, some thumbnails even show the "metadata changed" badges even though I haven't touched them.
I'm using LR 3 Macintosh, and want to share catalogs between my laptop and desktop using Import from Catalog. I consider my desktop the "master catalog" and mainly use the laptop for capture or editing when I'm traveling. The laptop catalog and photos are stored on a portable drive.
Here's what I did to try to isolate the problem - all of this was executed on my desktop machine so the LR settings should be identical:
1) Created a new catalog on the portable drive while attached to desktop.
2) Restart LR with new portable drive catalog active.
3) "Import to catalog" and import 10,000 photos to portable drive from the desktop catalog. This ran with no problems as expected.
4) Restart LR w/ original desktop catalog.
5) Run "Import from Catalog" to import form the portable drive. -- NOTE I hadn't touched ANY photos on portable since step 3.
6) Import from catalog show 0 "new" photos but about 10 "changed" photos. Why?? It shouldn't show any.
7) Cancel step 6 and run Import from catalog again. This time it shows 0 new and 0 changed. (that's what I'd expect).
8) Cancel step 7 and run Import from Catalog again. This time it shows 0 new and about 30 changed - But they're a different set than in step 6.
9) Give up and post this question. What is changing the metadata?
As background, I'm running most current versions of OS X and LR 3. My library contains mostly DNG files with some jpg and some TIF and PSD. The "modified" files that are showing up all seem to be DNG files. The files in the library were shot with Canon, G2, G10, 10D, 20D, 60D and 7D. The "modified" files appear to be from the 20D, 60D and 7D (all files shot in last 6 months). The library has some virtual copies and stacks, but this doesn't appear associated with the "modified" files.
Thank you in advance.
Marshall

Ian;
Thank you for your response. I suspect you may be correct, although I can't trace the problem to explain lens profiles as the issue either at this point. Each time I try to "Import from Catalog" back and forth between two catalogs - both made from the same instance of LR, it shows a different set of photos with who's metadata is changed. I make absolutely NO changes to any photos. I just choose "Import form catalog," look at the list of photos it says are changed, select, 'cancel," and then select "Import form catalog" again. Each time it gives me a different set of, and total amount of changed photos. First its 9 photos, then 32 photos, then 447 photos, etc.
This has "BUG" written all over it. If it's actually a feature, I wish someone could show me how to control it.
A lot of people complain about LR's ability to share catalogs between computers and keep multiple catalogs in sync. If I could master "Import from Catalog," I'd feel I'd have a workable solution for managing multiple computers (with one photographer / editor).
Just my opinion on this one feature. Overall, I LOVE working with LR.
Thanks again,
Marshall
PS. Thank you, Ian for the many tips and tutorials you've provided over the past years. I've learned a lot from them.

RFC metadata change: how to refresh?

Similar Messages

Maybe you are looking for