Rfc read file
HI,
Ive developed a BAPI which is is reading file from client machine using FM gui_upload. The bapi is going to be called via rfc . The bapi works fine in whenever executed in stand-alone method. However whenever the bapi is called via rfc , the file is not read.
Can anyone share his/her experiences on such similar requirement ? Kindly advise.
Bye
Hello,
In some ways your problem is the same as one that is forever popping up here on SDN. That is ,
how to down/upload a file to/from the presentation server in background. In your scenario a remote process is trying to use a GUI to upload a file, in the above scenario it is a background process trying to do the same. In both cases the answer is the same. There is no easy way to do this. Your remote process will not be able to directly execute gui_upload. One possible suggestion which might help may be found in this document :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9831750a-0801-0010-1d9e-f8c64efb2bd2
It is not pretty but it might give you some suggestions.
You can also search the form for 'downloading to the presentation server in background' ( or some variant of this string). You may get an idea or two from the previous posts.
Regards
Greg Kern
Similar Messages
-
Hi All,
I am working on SAP PI 7.31 dual stack. I have configured a simple RFC to File scenario with aysnchronous interface. I am using classic configuration.
In Sender RFC channel monitoring I am getting the below exception and the file is not created.
"Error in processing caused by : com.sap.aii.af.lib.mp.module.ModuleException : call to messaging system failed: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message xxxxxxxxxxx(OUTBOUND) expired".
Please suggest me what could be the issue.
Thanks,
MadhurimaHi Madhu
As the log says the function module is try to execute synchronously.
But as per your requirement it should be asynchronous. Please remove all the export parameters from the function module.
Then re-import the function module in PI and adjust mapping and operation mapping.
Stop and start the RFC sender adapter so that it will get the new metadata of the function module.
The function module should have only import parameters so that it will act like a asynchronous interface. -
All,
Quick question - im trying to configure a RFC to file scenario. Is there a step-by-step document somewhere. I did the steps as mentioned in few of the blogs (Michal's and others) and im kind of stuck in how to trigger the scenario?
Thanks.Hey thezone,
you can make it like this:
- create a "dummy" RFC, which is a function module with enabled remote access. In this dummy RFC, there should be no source code, only importing parameters (and these importing parameters are the ones you'll see in request message when importing the RFC into Integration Repository);
- create a RFC Destination of type T (TCP/IP) in SM59. Then, select it as "Registered Server Program" and use some string for the ProgramID field (best practice is to use ProgramID = RFC Destination name). Finally, enter hostname and gateway of RFC Server (which can be the same as of the web as abap where you have these objects). Gateway should be "sapgwXX" (with no quotes), where XX is the System number;
- this rfc should be called by the function module which is executed by your report. In the function module, use it like this:
CALL FUNCTION '<rfc_name>'
IN BACKGROUND TASK
DESTINATION <rfc_dest_name>
EXPORTING
where <rfc_name> is the name of the dummy rfc, <rfc_dest_name> is the name of the RFCDestination you created, and you export the parameters expected in Importing Parameters field of the dummy RFC;
- Import the dummy RFC in Integration Repository and use it for relevant mappings/interfaces;
- Finally, in Integration Directory, when creating the Sender RFC Adapter, Program ID should be the same of the RFC Destination you had created in SM59 of source system, and hostname/gateway should also be the same you inputed there.
Regards,
Henrique. -
How to do message mapping in IDoc or RFC to file transfer ?
Hello guys. I have a doubt. I know how to do an IDoc to file or RFC to file scenario. But how to do mapping in an Idoc to file or RFC to file scenario ? As I understand mapping is done in the sender. But IDoc or RFhas no interface as its used for SAP. So where do we need to perform mapping ?
Hi,
You dont need the Data type and message type for IDOC's, RFC's and for external definitions. so u just create one DT,MT for your File structure and you need 2 message interfaces, one for file and one for the Idoc/RFC. You can use them in your mapping program.
Regards,
Kumar.
P.S: Reward Points if Helpful!!!!!!!!! -
Hi ,
I am using RFC to file adapter.i am facing this error in XML.
com.sap.aii.utilxi.misc.api.BaseRuntimeException
thrown during application mapping
com/sap/xi/tf/_MM_RFC2FILE_: RuntimeException in
Message-Mapping transformatio~
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_RFC2FILE_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
for receiver CC chanel i am using File adapter.Is there nees to use file content conversion for this.Test the mapping with the payload from MONI, check if your mapping logic works in teh test tab of MM adn do the neccessary correction.
18:46:42 Start of test
Compilation of MM_RFC2FILE successful Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:157) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:832) Root Cause: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3)(:main:, row=2, col=3) -> com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2787) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2832) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(Unknown Source) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:832) -
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144) at javax.xml.parsers.SAXParser.parse(Unknown Source) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:832) Caused by: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2787) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2832) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280) at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342) at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125) at javax.xml.parsers.SAXParser.parse(Unknown Source) at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:155) at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:73) at java.lang.Thread.run(Thread.java:832) Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 2d, 20, 3c(:main:, row:2, col:3)
18:46:43 End of test
are you sending a XML file or a flat file to the target.If flat file ,
what is the requirement/delimitor and the data format requested by the Receiver system.
i just passind data from R3 RFC to XI,so sujjest what is needded in receiver file adapter. -
Problem Executing RFC to File Scenario
Hi,
I am currently working on RFC to File Scenario which is Asynchronous in Nature i.e. The RFC will send some data to XI and then it'll be dumped in an XML File on the shared drive.
Following are the steps which were performed by me :
1. i created an RFC Destination in R/3 using SM59 and entered the Required values as mentioned in the blog
The specified item was not found.
2. Then i entered the same values in the communication channel of the sender RFC adapter.
I tested it from R/3 and the connection was successful.
3. i created an RFC in SE37 in the R/3 and just added an existing table under the "tables" tab. No further code was written in it. I saved it and activated it.
4. All the IR and ID objects were made and activated and then the scenario was run by sending a single data row by pressing F8. The RFC showed a message of "System Failure" and while looking into the XI Server (SXMB_MONI) the message gave absurd values with a error symbol(it a Red Light symbol and there was no Red Flag).
Initially, the XML file was getting posted in the shared drive but after further execution it stopped.
I am unable to figure out the problem. Kindly let me know where i am going wrong and what needs to be done to correct it ?Hi,
For Sending RFC asynchronously check for these points:
For RFC creation and importing please follow this discussion. Very useful:
Re: RFC to FILE
Specially reply by Udo Martens.
Also for sender RFC, check two things.
1) First step is Register your ProgramId using activiating the communication channel(XI). You should be able to see it in smgw(R/3)
smgw->Goto->Looged on Clients(Check it here)
2) Then use this registered programid in your RFC Destination,in R/3 (it is Case-Sensitive).
These are just common errors i have encountered sometimes. -
MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more...
Ingo,
I am getting below error message in BO Test environment when I refresh WebI document.
MDDataSetBW.GetCellData. See RFC trace file or SAP system log for more details
It was working when we migrated the objects initially. Subsequently when we try to refresh WebI document we are getting the above error message. It still works in BO Dev environment and the no of records are the same in Dev and Test.
I am able run the underlying BEx query in SAP BW Test environment and it does return data.
I checked ST22 and SM21 log, but no details there.
Is it related to Authorization on the Universe or Bex Query?
We are in the middle of UAT and not able to move forward. I would greatly appreciate your input.
Thanks
RamIngo,
I ran the zip file and added the required entries to registry.
And then I tried to reproduce the error, but the files are not generated instead I noticeed below error message on the server:
The description for Event ID ( 7939 ) in Source ( Crystal OLAP Client ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Registry Access Error: , [HKEY_LOCAL_MACHINE]Software\Business Objects\Suite 12.0\MDA\Log\Modules: The system cannot find the file specified..
Does tha t mean we do not have permissons to read the registry?
I would greatly appreciate your input.
Thanks in advance.
Ram -
R/3(RFC)-----XI---------FILE scenario
Hi All,
I developed the scenario like RFC>XI->File Asynch Scenario by using ABAP Proxy(Client). Can i use business service for receiver in this scenario?
All http connections between R/3 and XI are configured. Could you please explain me how to test this scenario.
Thanks<
Nagarjuna.Hi,
1) Check wether the Message Mapping is working correctly by testing with test data.
2) You can test ur complete scenario in Configuration from TOOLS -> Test Configuration.
There u can find whether Sender Agreement,Receiver Agreement,Interface Determination and Receiver Determination are correctly configured. By giving Payload.
3) Check your Communication Channel in RWB.
Because if u r using Content Conversion, there will be some problem. So check this.
Thanks,
Kish. -
RFC Sender configuration : RFC - XI - FILE
Hi All,
I read the post at RFC Sender Configuration in Asynchronous Mode and I have the same problem for the configuration.
I want to do a simple asynchronous RFC scenario ( RFC -> XI -> FILE) but I keep getting errors. Do I need to create a BPM to make it work? I'm using XI 3.0
ThanksHi,
For RFC to File Scenario, if you will be calling the RFC from any ABAP report then the import parameters will be passed to File.
Here you can use the Concept of Dummy RFC as below.
Lets say RFC1 --> Original RFC
RFC2 ---> Dummy RFC
1. Create one Function Module (RFC 2) in which take the import parameters similar to the RFC -1 Output parameters.
2. Now in ABAP report call the RFC-1 and get the Output in export parameters and pass it to RFC-2 as import parameters.
3. In XI import RFC-2 and map the import parameters to the Receiver File.
SO your purpose to pass the Output of RFC-1 to file in async way will be resolved .
Thanks
Swarup -
Async RFC to file -data not passsed to PI
Hi all,
Im facing a peculiar problem in Async RFC to File scenario.
I have done all the required configurations for it.
Referred the following blogs :
/people/swaroopa.vishwanath/blog/2006/12/28/send-rfc-to-sap-xi-150-asynchronous
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/scn/advancedsearch?query=rfctofile+scenario
As soon as I trigger the scenario in R/3 , I get a message in PI but the data is not passed.
The payload I get in PI is with empty tags...Hi Ramya,
As you are getting the empty payload there is not probelm i nthe connection between R/3 and XI system.
1. Check the logic you used in RFC .. place a break point and check your execution is a getting data properly.
2. Some times due to the re design in the interface the cache needs to be updated properly.. Check this too.
Regards
Sunil. -
Can yu sedn me a sample step by step rfc to file scenarion
can yu sedn me a sample step by step rfc to file scenarion
Hi,
Please see the below links , use target side is File instead SOAP/webservice..
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Troubleshooting - RFC and SOAP scenarios-/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
RFC -> XI -> WebService - A Complete Walkthrough (Part 2) -/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
RFC to SOAP
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/piers.harding/blog/2004/07/18/you-dont-need-to-use-soap-to-keep-your-rpc-clean
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/david.halitsky/blog/2006/08/25/soa-vs-rfc-it-doesnt-have-to-be-charles-bronson-vs-henry-fonda
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfc%20to%20soap%20scenario&cat=sdn_weblog
Regards
Chilla.. -
hi
is synch asynch bridge used in synchronous rfc to file please? if so how does it work?>>Is there a scenario like synchronous rfc to file?
>>Do we use synch asynch bridge for that?
Yes. Follow this Blog Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi By Sriram Vasudevan. It demonstrate a scenario of Sync Http and file in you case the sender is an SAP RFC function.
Thanks
SaNv... -
How to via JCO Call RFC upload file to the SAP DMS.
HI ,ALL :
NOW i want to upload file via JCO,but i upload in sap gui is success ,but jco call RFC is error ,this is my code:
excute this code is not error ,but the data not write to SAP,
//连接SAP
Client client = com.hipfung.jco.JCOFactory.getInstance().getClient();
JCO.Repository repo = new JCO.Repository("ZOA01", client);
//调用RFC函数
IFunctionTemplate ft = repo.getFunctionTemplate("CVAPI_DOC_CHECKIN");
JCO.Function f = ft.getFunction();
IFunctionTemplate ft2 = repo.getFunctionTemplate("BAPI_TRANSACTION_COMMIT");
JCO.Function commitFunction = ft2.getFunction();
//设置传入参数值(注意类型)
//1.传入参数为Field
f.getImportParameterList().setValue("TXB", "PF_DOKAR"); //
f.getImportParameterList().setValue("0000010101010101020000000","PF_DOKNR"); //文档类型
f.getImportParameterList().setValue("01","PF_DOKVR"); //文档版本
f.getImportParameterList().setValue("000","PF_DOKTL");
f.getImportParameterList().setValue("SAPFTPA","PF_FTP_DEST");
f.getImportParameterList().setValue("SAPHTTPA","PF_HTTP_DEST");
// Get content as table
f.getImportParameterList().setValue("TBL", "PF_CONTENT_PROVIDE");
//read file and trans to byte
byte b[]=null;
File inf = new File("d:
test.jpg");
InputStream in;
try {
in = new FileInputStream(inf);
b =new byte[(int)inf.length()]; //创建合适文件大小的数组
in.read(b); //读取文件中的内容到b[]数组
in.close();
} catch (FileNotFoundException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
//set byte to internal table
JCO.Table poItem = f.getTableParameterList().getTable("PT_CONTENT");
poItem.appendRow(); //增加空行
poItem.setValue(b, "ORBLK");
poItem.nextRow();
//运行RFC函数
try
client.execute(f);
client.execute(commitFunction);
catch(JCO.AbapException ae)
System.err.println("JCO.AbapException: < DMS > " + ae);
ae.printStackTrace();
catch(JCO.Exception e)
System.err.println("JCO.Exception: < DMS > " + e);
e.printStackTrace();
//返回参数
JCO.Structure struct = f.getExportParameterList().getStructure("PSX_MESSAGE");
String te = struct.getString("MSG_TYPE");
System.out.println("RFC Error Type is :"+te);
String pr = struct.getString("MSG_TXT");
System.out.println("RFC get Data is :"+pr);
com.hipfung.jco.JCOFactory.getInstance().release(client);
i can get file via CVAPI_DOC_CHECKoutView
Edited by: pan qiaoming on Mar 15, 2011 3:05 PMHI ,ALL :
NOW i want to upload file via JCO,but i upload in sap gui is success ,but jco call RFC is error ,this is my code:
excute this code is not error ,but the data not write to SAP,
//连接SAP
Client client = com.hipfung.jco.JCOFactory.getInstance().getClient();
JCO.Repository repo = new JCO.Repository("ZOA01", client);
//调用RFC函数
IFunctionTemplate ft = repo.getFunctionTemplate("CVAPI_DOC_CHECKIN");
JCO.Function f = ft.getFunction();
IFunctionTemplate ft2 = repo.getFunctionTemplate("BAPI_TRANSACTION_COMMIT");
JCO.Function commitFunction = ft2.getFunction();
//设置传入参数值(注意类型)
//1.传入参数为Field
f.getImportParameterList().setValue("TXB", "PF_DOKAR"); //
f.getImportParameterList().setValue("0000010101010101020000000","PF_DOKNR"); //文档类型
f.getImportParameterList().setValue("01","PF_DOKVR"); //文档版本
f.getImportParameterList().setValue("000","PF_DOKTL");
f.getImportParameterList().setValue("SAPFTPA","PF_FTP_DEST");
f.getImportParameterList().setValue("SAPHTTPA","PF_HTTP_DEST");
// Get content as table
f.getImportParameterList().setValue("TBL", "PF_CONTENT_PROVIDE");
//read file and trans to byte
byte b[]=null;
File inf = new File("d:
test.jpg");
InputStream in;
try {
in = new FileInputStream(inf);
b =new byte[(int)inf.length()]; //创建合适文件大小的数组
in.read(b); //读取文件中的内容到b[]数组
in.close();
} catch (FileNotFoundException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
//set byte to internal table
JCO.Table poItem = f.getTableParameterList().getTable("PT_CONTENT");
poItem.appendRow(); //增加空行
poItem.setValue(b, "ORBLK");
poItem.nextRow();
//运行RFC函数
try
client.execute(f);
client.execute(commitFunction);
catch(JCO.AbapException ae)
System.err.println("JCO.AbapException: < DMS > " + ae);
ae.printStackTrace();
catch(JCO.Exception e)
System.err.println("JCO.Exception: < DMS > " + e);
e.printStackTrace();
//返回参数
JCO.Structure struct = f.getExportParameterList().getStructure("PSX_MESSAGE");
String te = struct.getString("MSG_TYPE");
System.out.println("RFC Error Type is :"+te);
String pr = struct.getString("MSG_TXT");
System.out.println("RFC get Data is :"+pr);
com.hipfung.jco.JCOFactory.getInstance().release(client);
i can get file via CVAPI_DOC_CHECKoutView
Edited by: pan qiaoming on Mar 15, 2011 3:05 PM -
Hi Everyone,
Would anyone Please give me steps for RFC to File Scenario.
Thanks & Regards,
Varun1) Create synch interfaces 4r source and target.
For RFC while creation of interface
input msgtype - Request msg
output msgtype - Response msg
2) Create 2 msg mappings.
inputmsgtype(file)----> Requestmsgtype(RFC)
Responsemsgtype(RFC)--->outputmsgtype(file)
3) Create 1 interface mapping choosing synch interfaces on
src and tgt side.
-->you ll get two tabs here request and response.
-->Click on request nd specify 1'st mapping
--> Click on response nd specify the 2nd mapping.
Refer this blog:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file-rfc-file%28without+bpm%29& -
NO DATAS IN OUTPUT FILE FOR RFC TO FILE SCENARIO
In RFC to File scenario, I am executing the ABAP program in ECC and generates a empty file in PI server.
I am getting the error message in SM58 of ECC:
u2018Bean Z_HR_OUTBOUND_DATA2 not found on host SDNPI1,u2019
'call FM Z_HR_OUTBOUND_DATA2 to ProgId ECCTOPI_OUTBOUND on host SDNPI1 wit'
RFc Source code:
FUNCTION Z_HR_OUTBOUND_DATA2.
""Local Interface:
*" EXPORTING
*" VALUE(FILENAME) TYPE BBP_ACC_DESCRIPTION-ACC_OBJ_NAME
*" VALUE(RETURN) LIKE BAPIRETURN STRUCTURE BAPIRETURN
*" TABLES
*" ITAB10 STRUCTURE YSTRING1 OPTIONAL
*" P_STATUS STRUCTURE ZHRT0031 OPTIONAL
DATA : wa_status TYPE zhrt0031,
wa_itab10 LIKE ITAB10.
break-point.
LOOP AT p_status INTO wa_status.
CONCATENATE wa_status-pernr
wa_status-ename
wa_status-orgeh
wa_status-plans
wa_status-persg
wa_status-rank
wa_status-***
wa_status-icnum
wa_status-usrid
wa_status-dept
INTO wa_itab10-str1.
APPEND wa_itab10 TO itab10.
ENDLOOP.
wa_itab10-str1 = 'test'.
append wa_itab10 to itab10.
append wa_itab10 to itab10.
CONCATENATE sy-datum
'PYO_EMPDAT.TXT'
INTO
filename.
ENDFUNCTION.
And in the ABAP program the RFC is called like:
CALL FUNCTION 'Z_HR_OUTBOUND_DATA2'
in background task destination 'ECCTOPI'
EXPORTING
INTERFACE =
IMPORTING
FILENAME = filename
return = return
TABLES
ITAB10 = itab10
P_STATUS = p_status
When i am testing the standard program STFC_CONNECTION in ECC with the same RFc destination it works fine and creates a o/p file with the datas in it, but if i m executing the other function module it doesnt contain any data it.
What could be the error? and how to resolve the errors that i am getting in SM58?
ThanksBean Z_HR_OUTBOUND_DATA2_1 not found on host SDNP1, ProgId =ECCTOPI_OUTB
Change the case of your Program ID to lower ecctopi similar was the issue in this thread:
Bean ZFM_MODULE_OUT not found on host <XI_HOST>
And may be for the same reason even Michal used lower case program ID in his blog.
Regards,
Abhishek.
Maybe you are looking for
-
Type characters display as boxes on some fonts.
Some fonts display each character as a box. How can I display these fonts properly in Illustrator? The fonts are installed and work normally in other programs.
-
Error when determining the inbound interface
Hi Experts, I have a Scenario, where i am using Multi mapping Scenario in DEBMDM IDOC from ECC to Xml_File-1(DEBMAS) and Xml_File-2(ADRMAS). When i Execute the Scenario by sending the IDOC from ECC , i am getting the below error. Runtime error Error
-
LMS 4.2.3 Unidentified Trap Generic Trap:6 Specific Trap:1 EnterpriseOid:.1.3.6.1.4.1.9.9.41.2
Hi All, We are seeing unidentified traps continuously on the LMS 4.2.3. Unidentified Trap Generic Trap:6 Specific Trap:1 EnterpriseOid:.1.3.6.1.4.1.9.9.41.2 What are these traps and how to avoid the same. as these traps are coming from all the device
-
Hi, I have been using the BT Home Hub 2.0 for approx 1.5 years, wirelessly connected to my Mac. I have now bought a network adaptor for my PC which is upstairs. the adaptor was installed easily and connected straight away to the hub and shows excelle
-
Reduce font size in Itunes 11 on Windows
Aaaargjh....why-oh-why does V 11 not have a simple way to reduce the font size? On a decent hi-res PC screen the whole screen is just jammed in because the font is too large. Can i change it without needing a PHD in astrophysics first? What are th