RFC WHICH CAN USE DYNAMIC SQL AS INPUT AND SHOW COMPLETE DATA FOR TABLE

Hi Expert,
I am trying to create a FM like RFC_READ_TABLE. In this table we put table name and the field name for which we write a query and option for query we get the out put only for that field in this case.
My requirement is very similar to this. But here i want to enter any table name and in option i want to write dynamic sql query for any filed of table then i want data based on this so that it will display the entire table entries.
Like TABNAMELIKE     EKKO
OTHERCON     bukrs_k = 3000.
Based on this selection it has to show the entire table fields.
To make this easy to understand i made a custom FM which are getting data from table or view and i select any field and put query it will show the result.
FUNCTION ZDYNSQL_EKKO_EKPO.
""Local Interface:
*" IMPORTING
*"     VALUE(ERNAMLIKE) TYPE CHAR15 OPTIONAL
*"     VALUE(OTHERCON) TYPE CHAR50 OPTIONAL
*" TABLES
*"      VALUE STRUCTURE V_EKKO_EKPO
*TABLES : V_EKKO_EKPO, EKKO, EKPO.
DATA: STR_WHERE TYPE TABLE OF EDPLINE.
DATA: STR_LINE TYPE EDPLINE.
*CONCATENATE 'EBELN LIKE''' EBELNLIKE '%''' INTO STR_LINE.
        CONCATENATE 'ERNAM LIKE ''' ERNAMLIKE '%''' INTO STR_LINE.
        IF OTHERCON <> '            '.
        CONCATENATE STR_LINE 'AND' OTHERCON '            ' INTO STR_LINE SEPARATED BY SPACE.
        ENDIF.
      APPEND STR_LINE TO STR_WHERE.
      SELECT * FROM V_EKKO_EKPO INTO CORRESPONDING FIELDS OF TABLE VALUE WHERE (STR_WHERE).
ENDFUNCTION.
Now here is sample code of exact requirement.
FUNCTION ZDYNSQL_TABLE_READ.
""Local Interface:
*" IMPORTING
*"     VALUE(TABNAMELIKE) TYPE DD02L-TABNAME
*"     VALUE(OTHERCON) TYPE CHAR80 OPTIONAL
*" TABLES
*"      VALUE STRUCTURE DD02L
DATA: STR_WHERE TYPE TABLE OF EDPLINE.
DATA: STR_LINE TYPE STRING.
        CONCATENATE 'TABNAME LIKE ''' TABNAMELIKE '%' 'DD02L' 'TABNAME' INTO STR_LINE.
        IF OTHERCON <> '            '.
        CONCATENATE STR_LINE 'AND' OTHERCON '            ' INTO STR_LINE SEPARATED BY SPACE.
        ENDIF.
      APPEND STR_LINE TO STR_WHERE.
      SELECT * FROM DD02L INTO CORRESPONDING FIELDS OF TABLE VALUE WHERE (STR_WHERE).
ENDFUNCTION.
In this i put table name as EKKO and put sql query as bukrs_k = 3000 it provide a short dump.
How can i solve this problem. Please provide some input or modification
Thanks And Regards
Ranjeet Singh

Hi Kris,
I tried to make sample using that link you provide to me. How can i declare Global Interface in FM and in import parameter references like "REFERENCE(I_INTERFACE_CHECK) DEFAULT SPACE".
Also it uses a function-pool.
Let me tell you about my exact requirement about FM.
I want in import parameter input as any SAP Table name like
TABNAME TYPE EKKO
OPTIONS TYPE CHAR80
I want my output to be stored in TABLES attributes as per the table name entered in import parameter. In import parameter Table name can be any one of SAP tables and Option based on that particular table. Like if i go with table EKKO and put OPTIONS as
ebelp = 4 then TABLES attributes Tab contains all the relevant data for input.
Is there any way with the help of that i can put my data into internal tables. I tried to put in TABLES as VALUE LIKE ANY but it shows that generic are not allowed. Can you provide some sample on this.
I also getting exceptions like CX_SY_DYNAMIC_OSQL_SEMANTICS, SAPSQL_INVALID_FIELDNAME.
Waiting for your valuable reply.
Thanks And Regards
Ranjeet Singh

Similar Messages

Can we use Dynamic SQL in Oracle Reports ?

Hi ,
Can we use Dynamic SQL in Oracle Reports ?
If yes please give some examples .
Thanx
srini

I believe the built-in package SRW.Do_Sql is what you are looking for
Example from the document:
/* Suppose you want to create a "table of contents" by getting the
** first character of a columns value, and page number on which its
** field fires to print. Assume that you want to put the "table of
contents"
** into a table named SHIP. You could write the following construct:
DECLARE
PAGE_NO NUMBER;
PAGE_FOR INDEX NUMBER;
SORT_CHAR CHAR(1);
CMD_LINE CHAR(200);
BEGIN
SORT_CHAR := :SORT_NAME ;
IF :CALLED = Y THEN
     SRW.GET_PAGE_NUM(PAGE_FOR_INDEX);
     SRW.USER_EXIT(RWECOP PAGE_FOR_INDEX
     P_START_PAGENO);
     SRW.MESSAGE(2,TO_CHAR(:P_START_PAGENO));
END IF;
SRW.GET_PAGE_NUM(PAGE_NO);
CMD_LINE := INSERT INTO SHIP VALUES
                      (||SORT_CHAR||,||TO_CHAR(PAGE_NO)||);
SRW.MESSAGE(2,CMD_LINE);
SRW.DO_SQL(CMD_LINE);
COMMIT;
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
        NULL;
WHEN SRW.DO_SQL_FAILURE THEN
        SRW.MESSAGE(1,FAILED TO INSERT ROW INTO SHIP TABLE);
WHEN OTHERS THEN
       COMMIT;
END;

Should I use dynamic SQL for simple updates?

Please tell me, out of the two options given below, which option should i use to update columns in a table and why?
what will be the performance difference between the two approaches?
Please note: The options given below is just for an example
procedure proc1(var1 varchar2)
is
begin
update tab1 set col1 = var1;
commit;
end;
procedure proc1(var1 varchar2)
is
sqlstr varchar2(1000);
begin
sqlstr := 'update tab1 set col1 = :v1';
execute immediate sqlstr using var1;
commit;
end;
Thanks
Arun

Arun G Nath wrote:.
Should I use dynamic SQL for simple updates? No way, not a chance.
Performance is not the issue (as long as you are using bind variables).
But with dynamic SQL, you loose compile time checking; you do not know until runtime if the SQL is valid.
You also loose the dependency between proc1 and tab1, which can be found only if you search user_source.
(And in either case, you probably want to remove the commit)
Regards
Peter

Is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)

function displayMap(e) {
var title = e.data.title,
latlng = e.data.lat + ',' + e.data.lng;
if (typeof device !='undefined' && device.platform.toLowerCase() == 'android') {
window.location = 'http://maps.google.com/maps?z=16&q=' + encodeURIComponent(title) + '@' + latlng;
} else {
$('#map h1').text(title);
$('#map div[data-role=content]').html('<img src="http://maps.google.com/maps/api/staticmap?center=>' + latlng + ' &zoom=16&size=320x420&markers=' + latlng + '&sensor=false">');
$.mobile.changePage('#map', 'fade', false, true);
my phonegap (Adobe press, Powers jQuery with dw 5.5) book (old book (c)2010-11) says for above code: // is this valid for today, is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)???
On iOS, calling window.location loads the map directly
into the app. That’s great until you realize that iOS devices
don’t have a Back button, so there’s no way to exit the
map. To get round this problem, I loaded a static map as
an image in the map page block. It’s not interactive, but at
least you can continue using the Travel Notes app after
viewing the map by clicking the Back button generated by
jQuery Mobile.

Well, this took me a while to get solved, but it is indeed solved.
I tried USB Overdrive and it could, and perhaps should work, but apparently it will not. When adding a device, it seems that USB Overdrive is not set up to handle any input device that does not register itself as either a Mouse or a Joystick. The VEC USB Footpedal that I'm using is "Device type: Other".
So, I went for Quickeys. And Quickeys can do it all. It did recognize the device, I was able to assign it to the scope of the particular audio playback app I wanted to use (Amazing Slow Downer OS X - which is truly amazing. Any musicians reading this who are looking for a way to learn pieces by ear, this does it better than anything else I've seen yet).
I created a shortcut in Quickeys for the ASD app; added the middle button of the foot pedal as the trigger; set one step, entering 'space bar' as the step (which toggles playback, similar to many audio players).
It all worked.
Quickeys is very confusing and seemingly featured with an endless array of options. Enter at your own risk. Ask me for help. This was the only way to get it done that I could find. I did write to the author of USB Overdrive asking him to please support additional devices as I did find some traction from gamers who like to use a foot pedal in addition to other input devices. There was a Windows-only management utility for the foot pedal that was intended for custom input, assigning the buttons to any keyboard input or mouse click event. It would be nice to have a simple and easy to use utility like this. But, Quickeys did do the job.
Thanks for your help, you guys!!!

How to Use Dynamic SQL

Can anybody please send me a small program on How to Use Dynamic SQL.
How to execute and run give details.
Thanks
null

You can certainly use the INTO (and USING) clauses of EXECUTE IMMEDIATE to pass in and return data, i.e.
EXECUTE IMMEDIATE sqlStmt
USING variable1, variable2
INTO output1, output2The more complex the statement, however, the more appropriate DBMS_SQL is. DBMS_SQL also has the potential to allow you to use bind variables rather than reparsing the statement many times.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Getting error while using DYNAMIC SQL

Hi Team,
I am Oracle DBA. I have limited knowledge on PL/SQL. I used below PL/SQL code to drop 50 partitons from one of the table.
I used Dynamic SQL EXECUTE IMMEDIATE to drop partions. But error occured. If I commented EXECUTE IMMEDIATE, procedure executed successfully.
Please suggest me, where i did the mistake. Also please suggest for better code than my code. please find below code and error details.
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2 CURSOR DROP_PARTITON IS select partition_name from user_tab_subpartitions where PARTITION_NAME<='ABCD_2011_04';
3 BEGIN
4 for curr IN DROP_PARTITON LOOP
5 DBMS_output.put_line(curr.partition_name);
6 execute immediate(Alter table Table_Name drop partition curr.partition_name);
7 end loop;
8* END;
SQL> /
execute immediate(Alter table BILLCHRG drop partition curr.partition_name);
ERROR at line 6:
ORA-06550: line 6, column 19:
PLS-00103: Encountered the symbol "ALTER" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternative
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2 CURSOR DROP_PARTITON IS select partition_name from user_tab_subpartitions where PARTITION_NAME<='ABCD_2011_04';
3 BEGIN
4 for curr IN DROP_PARTITON LOOP
5 DBMS_output.put_line(curr.partition_name);
6 --execute immediate(Alter table TABLE_NAME drop partition curr.partition_name);
7 end loop;
8* END;
SQL> /
ABCD_2009_06
ABCD_2009_06
ABCD_2009_06
BILLCHRG_2011_04
PL/SQL procedure successfully completed.

PL/SQL code runs on the server, inside an Oracle process - thus PL/SQL code cannot dynamically write and display messages to the client. That server process is not connected to any keyboard, mouse or display.
DBMS_OUTPUT can be used. This is a PL/SQL buffer area in that server process that code can write lines of text too. When the server process informs the client that it has completed, the client can now request the contents of the DBMS_OUTPUT buffer and the client can display it on the client device.
This is what set serveroutput on in SQL*Plus does - tell the sqlplus client to request the DBMS_OUTPUT buffer after each Oracle server call made and to display the contents locally.
So to display the SQL command can be done using DBMS_OUTPUT. E.g.
declare
dropPart varchar2(32767);
begin
for c in (select...) loop
    dropPart := 'alter table my_tab drop partition '||c.partition_name';
    --// write the SQL command to DBMS_OUTPUT
    DBMS_OUTPUT.put_line( dropPart );
    --// execute the SQL using a begin..end block in order to catch error
    begin
      execute immediate dropPart;
      DBMS_OUTPUT.put_line( 'command completed successfully' );
    exception when OTHERS then
      DBMS_OUTPUT.put_line( 'command failed with: '||SQLERRM(SQLCODE) );
    end;
end loop;
end;So after this code block has been executed and partitions dropped, sqlplus will display the DBMS_OUTPUT generated by this code block.

Using Dynamic SQL in OWB maps

Hi,
Is there any way that we can write dynamic SQL in OWB.As per my requirement i want to change the where clauses dynamically on need basis.
Thx

David,
I want to change the where clause dynamically.Our objective is to make the map in a generic way so that if there is a change in where clause (i.e. adding more conditions in where clause) i dont have to change the map.I can change the values(if used, say emp_no=20) however i'm facing problem changing the whole condition i.e. even the column name.
Thx

Delcare Cursor using Dynamic SQL using PL/SQL in Oracle 7.3.4

In Oracle 7.3.4, can I declare a cursor at run time using Dynamic SQL. From the sample code in this website, it seems that Oracle 8 support this function. Please help. Thanks a lot.
If I can do this on Oracle 7.3.4, could you give me some sample codes? Thanks.
Regards,
Raymond

Hi,
Try using the the following code where you can dynamically build the Valid Select stmt. and call that where ever you want.
declare
Type Cur_ref Is Ref Cursor;
C_ref Cur_ref;
V_Str Varchar2(100);
V_Name Varchar2(100);
Begin
V_Str := 'Select Ename from Scott.emp Where empno = 7369';
Open C_Ref for V_Str;
Fetch C_ref Into V_Name;
close C_Ref;
dbms_output.put_line(V_Name);
End;
regards
gaurav
null

Using dynamic sql in triggers with :OLD values

i need to record all deleted rows from an entire schema in a single table. for that matter i created a function that receives a table name and generate an insert command according to it's primary key columns. i call this function in the table triggers. in order to insert the old values before the delete i use :OLD with "execute immediate" as followed :
create or replace trigger trg_some_tbl_bd
before delete on some_tbl
for each row is
declare
v_sql varchar2(4000);
begin
v_sql := generate_insert_command('some_table');
execute immediate v_sql;
end;
the return value from "generate_insert_command" function is the string:
insert into deleted_table (table_name , date , pk1 , pk2) values
('some_table' , sysdate , :OLD.pk1 , :OLD.pk2)
the execute immediate command notice the :OLD and looks for bind variables.
i need to know i can i bypass that. i tried looking for escape characters but couldent find any...
i would appriciate any help , it's kynda urgent
Thanks !

I don't believe this is going to work. Even if you could get around the fact that :old looks like a bind variable, the :old values are not visible to the dynamic SQL statement, they're like local variables in that respect.
If you wanted to pass old values in, those values would have to be passed in as bind variables, i.e.
EXECUTE IMMEDIATE v_sql USING :old.pk1, :old.pk2which defeats the purpose of using dynamic SQL.
Since you have to create a trigger for each table, I don't see why you would bother with dynamic SQL inside the trigger-- your table structure is fixed when the trigger is created. You could write dynamic SQL that generated the triggers in the first place, but the code inside the trigger should be dynamic.
As an aside, you realize that logging every audit record into a single table creates rather massive contention issues, right? And have you considered how painful it is to query this sort of table? Have you considered other options for maintaining history like Workspace Manager? Or at least separate history tables for each table?
Justin

ORA-01006 using Dynamic SQL

Hello,
I'm trying to create a function utilizing Dynamic SQL. The function compiles fine, but when I go to call it using the select staement below, I get :
ORA-01006: bind variable does not exist
ORA-06512: at "ICIM.PROD_SALES_DATA", line 24
select prod_sales_data('09','I',2009,'Awning')
from dual;
CREATE OR REPLACE FUNCTION prod_sales_data
(p_ahl1 IN VARCHAR2, p_phl1 IN VARCHAR2, p_fisyr IN NUMBER,
p_prod_str IN VARCHAR2)
RETURN NUMBER IS
v_return NUMBER;
query_str VARCHAR2(10000);
BEGIN
query_str :='select sum(a.qsh*a.unitcnt)'||chr(13)
||'from sh_units a, sh_product_desc b, sh_ad_glass c'||chr(13)
||'where a.unittype = b.unittype'||chr(13)
||'and a.sh_id = c.sh_id(+)'||chr(13)
||'AND a.ahl1 = '||chr(39)||p_ahl1||chr(39)||chr(13)
||'AND a.phl1 = '||chr(39)||p_phl1||chr(39)||chr(13)
||'AND a.fisyr ='|| p_fisyr||chr(13)
||'AND UPPER(b.descrip) = UPPER('||chr(39)||p_prod_str||chr(39)||')'||chr(13)
||'AND a.invdt between b.eff_beg and b.eff_end'||chr(13)
||'and a.parts_flag <>'||chr(39)||'Y'||chr(39)||chr(13)
||'and a.unittype <>'||chr(39)||'OTHE'||chr(39)||chr(13)
||'and icim.sh_rept_chk_ortp(a.ortp) = 1'||chr(13)
||'and A.REPT_RELEASE_DT is not null';
DBMS_OUTPUT.PUT_LINE(query_str) ;
EXECUTE IMMEDIATE query_str
INTO v_return
USING p_ahl1,p_phl1,p_fisyr,p_prod_str;
RETURN v_return;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
END prod_sales_data ;
Any help as to what is going wrong would be greatly appreciated.
Thanks,
Tyler

Hello,
>
I'm trying to create a function utilizing Dynamic SQL. But why?
Whenever you turn towards dynamic SQL, ask yourself why?
I bet for a couple of years you aren't able rto come up with an answer. Meaning you shouldn't.
Even if you do come up with an answer, think again. The answer may very well be wrong.
Wouldn't it be nice if your function was as simple as:
CREATE OR REPLACE FUNCTION prod_sales_data
   ( p_ahl1      IN VARCHAR2
   , p_phl1      IN VARCHAR2
   , p_fisyr     IN NUMBER,
     p_prod_str IN VARCHAR2)
RETURN NUMBER
IS
   v_return NUMBER;
BEGIN
    select sum(a.qsh*a.unitcnt)
      into v_return
      from sh_units a
         , sh_product_desc b
         , sh_ad_glass c
     where a.unittype = b.unittype
       and a.sh_id = c.sh_id(+)
       and a.ahl1 = p_ahl1
       and a.phl1 = p_phl1
       and a.fisyr = p_fisyr
       and upper(b.descrip) = upper(p_prod_str)
       and a.invdt between b.eff_beg and b.eff_end
       and a.parts_flag != 'Y'
       and a.unittype != 'OTHE'
       and icim.sh_rept_chk_ortp(a.ortp) = 1
       and a.rept_release_dt is not null;
RETURN v_return;
EXCEPTION
   WHEN NO_DATA_FOUND THEN
      RETURN NULL;
END prod_sales_data ;
/Now using proper bind variables, plain static pre-compiled SQL. And even works properly WITH NO DATA FOUND.
I know it's dangerous to use words as always and never, but i dare say
Always (Whenever you can) use static SQL. Never (Unless you must) use dynamic SQL (When you can use static).
Regards
Peter

Try to use dynamic sql connection for additioal data for xml publisher

I understand that the xml publisher is using template to merger the xml data output (say from Oracle report).
We have some Oracle seeded report and do not wish to modify these report, but we do need to add additional data to these reports. In the past, the tool we used has the capability to make dynamic sql calls to get these additional data. Can this be achieved in xml publisher?
I did noticed that the template builder has two options for upload data source: from a data file or from a sql connection, but seems they can not be used together. Not much document I can find for this. Thank you in advance for your help.
Frank

Hi All,
Sandeep: if u have the solution pls send to my email id [email protected]
ill really appriciate u r response.
I have the same requirement to develop AR Invoice Report in XML publisher, actually it was developed using Optio Layout.my issue is the actual AR Invoice RDF contains 20 records and it showing the 20 recodes when we run that program (concurrent program output) after that while printing this report uisng the OPTIO layout (The Optio system is fetching some more records (10 records)) it printing total 30 records. i mean here the OPTIO is handling some pl/sql code i guess..
so now how we can handle this requirement using XMLP.I am using RTF Templates with 5.6.2 v. Is it possible to do the same manner how the OPTIO was doing. Is this possible with any other Templates ?. or we need to customize the RDF itself ? .but I know that I can go ahead and modify the existing out-of-the-box report, but I do not want to do that. I do not have control over the XML that is generated since the XML is generated when the report is run. Is there any way to retrieve the extra information AFTER the xml has been generated and BEFORE the template is applied ?
Thanks,
Rad

How to build a wsdl which can cater dynamically to number of attachments

We have a WebService client that calls a Webservice on the Server.
When the client calls the webservice , it passes the SOAP message(Header,Body & MIME attachments)and these attachments vary in number based on different business requirements.
We know how to build WSDL for server with static number of attachments,but no clue on how to build a wsdl which can cater dynamically to number of attachments comming from client request.
- thanks in advance

Hello,
We may have multiple approaches here depending of :
- which version of the product you are using
- what are your clients in term of stack, and API they are willing to use
- which encoding did you use for your WS (swa, swaRef or dime)
So for my answer I am documenting how to do it on OracleAS 10gR3 (10.1.3), using swaRef approach.
The easiest way is to exchange array of binary data and describle that in the WSDL, so in my case the WSDL element that is used will look like that:
<element name="filesResponseElement">
<complexType>
<sequence>
<element name="result" type="ns1:swaRef" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</element>
This will generate from the Java code an array of AttachmentPart[].
Regards
Tugdual Grall

Using Dynamic SQL in Forms

Does anyone know anything about Dynamic SQL not being available in Forms v. 6.0.8.11.3? I trying to use Dynamic SQL for the first time and am having some difficulty. When I try to put my SQL in a function and run it straight into the database through SQLPlus, it works fine, but when trying to compile the code in Forms Builder (in a library), I get compiler errors. Any help would be appreciated...
Thanks!
Vanessa

When I tried to compile the following code in Forms, the compiler error I got was Encountered the symbol "STMT_STR" when expecting one of the following: select. However, when I run it in SQLPlus, it creates the function without any errors.
FUNCTION my_func
return number
is
TYPE DiaryCurTyp IS REF CURSOR;
cur DiaryCurTyp;
stmt_str VARCHAR2(200);
dmonth NUMBER;
dday NUMBER;
BEGIN
stmt_str := 'SELECT dmonth, dday FROM p2_diary
WHERE dmonth = :1';
OPEN cur FOR stmt_str USING '12';
LOOP
FETCH cur INTO dmonth, dday;
EXIT WHEN cur%NOTFOUND;
-- <process data>
END LOOP;
CLOSE cur;
END;

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

Error while using dynamic pointers in STD_LOGIC_VECTORs and for sentences

Hi Forum,
I am having a few problems in the Synthesis cause I am using dynamic pointers in STD_LOGIC_VECTORs and for sentences.
Here I show two examples:
1)
indx := array_of_indexes(repeat_deep);
aux_data(repeat_deep)(BUF_SIZE - indx*NUM_BITS downto BUF_SIZE-3 - indx*NUM_BITS) <= data_in_p;
Here, my problem is that indx is a dynamic pointer so it works in the simulation but no in the Synthesis.
aux_data is an array of STD_LOGIC_VECTORs
2)
for i_for in 0 to repeat_deep -1 loop
indx := array_of_indexes(i_for);
aux_data(i_for)(BUF_SIZE - indx*NUM_BITS downto BUF_SIZE-3 - indx*NUM_BITS) <= lasts_power(i_for);
array_of_indexes(i_for) <= array_of_indexes(i_for) + 1;
end loop;
Here I have both problems, the 'repeat_deep' in the 'for' is dynimic, and the 'indx' in the STD_LOGIC_VECTORs.
What can I do to solve the problem?
Thanks!!
Daniel

"I am having a few problems in the Synthesis cause I am using dynamic pointers"
If you're using Vivado, dynamic indexing is a known issue with Vivado Synthesis:
Vivado Synthesis - Does Vivado Synthesis support non-constant (dynamic) range expression?
http://www.xilinx.com/support/answers/52302.html
-Brian

RFC WHICH CAN USE DYNAMIC SQL AS INPUT AND SHOW COMPLETE DATA FOR TABLE

Similar Messages

Maybe you are looking for