RFS porcess is stopped
Dear All,
Till yesterday my physical dr was in sync and all of sudden this morning i have found 1000 archive gap between my primary and standby.
I have applied incremental backup ,i have also replaced old standby controlfile with latest one and tried to put the standby database in recovery mode , but the RFS process is not starting.
Following are the required details for the same ..
SQL> select banner from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select process,status from v$managed_standby;
PROCESS STATUS
ARCH CONNECTED
ARCH CONNECTED
MRP0 WAIT_FOR_GAP
SQL> select message from v$dataguard_Status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Managed Standby Recovery not using Real Time Apply
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
Media Recovery Waiting for thread 1 sequence 461642
Fetching gap sequence in thread 1, gap sequence 461642-461679
MESSAGE
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 461642-461679
DBID 2578507424 branch 709654561
FAL[client]: All defined FAL servers have been attempted.
Alter log :-
Completed: alter database recover managed standby database disconnect from session
Wed May 04 13:18:18 2011
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 461642-461679
DBID 2578507424 branch 709654561
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Wed May 04 13:28:52 2011
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
mrpo Process:-
Redo shipping client performing standby login
*** 2011-05-04 13:16:44.162 66535 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
*** 2011-05-04 13:17:15.486
Redo shipping client performing standby login
*** 2011-05-04 13:17:15.549 66535 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
*** 2011-05-04 13:17:46.905
Redo shipping client performing standby login
*** 2011-05-04 13:17:46.967 66535 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
*** 2011-05-04 13:18:18.245
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
udump trace output:
*** 2011-05-04 13:14:11.672
*** ACTION NAME:() 2011-05-04 13:14:11.500
*** MODULE NAME:(sqlplus.exe) 2011-05-04 13:14:11.500
*** SERVICE NAME:() 2011-05-04 13:14:11.500
*** SESSION ID:(873.1) 2011-05-04 13:14:11.500
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x4)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x4)
*** 2011-05-04 13:14:23.574
*** 2011-05-04 13:14:23.574 62692 kcrr.c
Managed Standby Recovery not using Real Time Apply
Recovery target incarnation = 2, activation ID = 0
Influx buffer limit = 80419 (50% x 160839)
Successfully allocated 3 recovery slaves
Using 364 overflow buffers per recovery slave
Start recovery at thread 1 ckpt scn 4075771372 logseq 461642 block 35812
*** 2011-05-04 13:14:29.939
Media Recovery add redo thread 1
*** 2011-05-04 13:14:35.618
Media Recovery drop redo thread 1
*** 2011-05-04 13:15:04.212
*** 2011-05-04 13:15:04.212 2289 krsm.c
Managed Recovery: THROUGH NEXT SWITCHOVER posted.
*** 2011-05-04 13:15:04.228 1118 krsm.c
Managed Recovery: DISCONNECT posted.
*** 2011-05-04 13:15:04.228 1118 krsm.c
Managed Recovery: Startup posted.
I have checked the command on Primary and received following message :-
Primary>select message from v$dataguard_status;
MESSAGE
Error 12170 received logging on to the standby
PING[ARC0]: Heartbeat failed to connect to standby 'DR1BSL'. Error is 12170.
Error 12170 received logging on to the standby
FAL[server, ARC0]: Error 12170 creating remote archivelog file 'DR1BSL'
Error 12170 received logging on to the standby
FAL[server, ARC0]: Error 12170 creating remote archivelog file 'DR1BSL'
Error 12170 received logging on to the standby
FAL[server, ARC0]: Error 12170 creating remote archivelog file 'DR1BSL'
Error 12170 received logging on to the standby
FAL[server, ARC0]: Error 12170 creating remote archivelog file 'DR1BSL'
Error 12170 received logging on to the standby
PING[ARC0]: Heartbeat failed to connect to standby 'DR1BSL'. Error is 12170.
Error 12170 received logging on to the standby
PING[ARC0]: Heartbeat failed to connect to standby 'DR1BSL'. Error is 12170.
Similar Messages
-
BO4 - 30270+ Frequent webi processing server crashes/processing server stopped unexpectedly
Hi ,
We are seeing relatively frequent 30270 error messages - when check event logs often see them preceded by webi porcessing server stopped unexpectedly messages.
Have split the aps as per best practice and have 4 webi processing servers ( 2 on each node)
Any thoughts?
Faulting application name: WIReportServer.exe, version: 14.0.8.1229, time stamp: 0x525dbf5c
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x12dc
Faulting application start time: 0x01cf32eaa201a083
Faulting application path: C:\bo4\SAP BusinessObjects Enterprise XI 4.0\win64_x64\WIReportServer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: e4a37101-9efd-11e3-9ebb-000c29ccd95d
30270 message soften preceded by below in event logs (estimate 80% of time)
[User Name: <username>]
Server Intelligence Agent: server<server_name>.WebIntelligenceProcessingServer2 stopped unexpectedly.
Node Name: <node_name>]Hi Philip,
I can feel like few of the heavy webi reports in your environment causing webi processing server down.
1) first we need to find which reports are causing the issue.
2) Enable monitoring to know the failure status of WIPC by email
3) Try to enable audit and capture the reports which are consuming more data and running when WIPS moved to stopped state
Then you will come to know the report with help of audit .
I have noticed the similar issue and noticed few reports which are retrieving more no of records and More no input cantrols in the report caused WIPS down. -
Compontents within SWC are sudenly not showing
I have been working on a project for the past few days and recently ran into a strange and frusterating problem. I have been creating assets in flash, buttons and the like, and exporting an swc to a folder in my flex builder actionscipt project. I've done this before and it's always worked great. At some point during the course of this project I renamed one of the movieclips in the flash file and though it showed up in the "code hints" as I typed, flex was not recognizing it (I was getting Type was not found or was not a complie-time constant: xyz ).
After checking that the swc folder link was still in tact, I tried making a whole new flash file and copy pasting all of my movieclips into the new project but alas, somewhere in the porcess, flex stopped recognizing everything in the swc. Further more I can't get this particular flex project to recognize ANY swc file I put in there. I tried making a whole new actionscript project in flex and that did work, but I still can't get the old files working. I've just wasted the better part of an evening on this and I'm about to jump out the window. Anyone ever have a prblem like this? Any one know what might be wrong? Is there a solution?
Thanks,
JoeHi,
Thank you very much, but this dows not solve the problem I have. I am able to open the Preferences folder, so I do see .plist files, but not all of them! Only files beginning with letters from A to C are displayed, then the list simply ends. The files however do exist. When searching via Finder/Spotlight for a specific file, it is listed in the results and the path displayed shows Users/.../Library/Preferences. -
ORA-16401: archivelog rejected by RFS
Hello, here are the logs and initialisation parameters. It is not applying the logs. Am running XXXXP and the standby and the primary are on the same server.
Please, I need help. Thanks
RFS[1]: Assigned to RFS process 216
RFS[1]: Identified database type as 'physical standby'
Wed May 13 18:39:07 2009
RFS LogMiner: Client disabled from further notification
RFS[1]: Successfully opened standby log 4: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\TEST2\STANDBY.LOG'
Wed May 13 18:39:15 2009
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 3-3
DBID 1063720110 branch 686695334
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Wed May 13 18:39:48 2009
RFS[1]: Archived Log: 'C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\TEST2\ARC00003_0686697929.001'
Wed May 13 18:40:33 2009
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Wed May 13 18:40:48 2009
RFS[1]: Archivelog thread 1 sequence 3 cannot be reused
Wed May 13 18:40:48 2009
Errors in file c:\oracle\product\10.2.0\admin\test2\udump\test2_rfs_216.trc:
ORA-16401: archivelog rejected by RFS
test1.__db_cache_size=88080384
test1.__java_pool_size=4194304
test1.__large_pool_size=4194304
test1.__shared_pool_size=62914560
test1.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\test1\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\test1\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\test1\control01.ctl','C:\oracle\product\10.2.0\oradata\test1\control02.ctl','C:\oracle\product\10.2.0\oradata\test1\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\test1\cdump'
*.db_block_size=8192
*.db_domain='appstech.local'
*.db_create_file_dest='C:\Oracle\product\10.2.0\oradata\test1'
*.db_file_multiblock_read_count=16
*.db_file_name_convert='C:\Oracle\product\10.2.0\oradata\test2\','C:\Oracle\product\10.2.0\oradata\test1\'
*.db_name='test1'
*.db_recovery_file_dest='C:\Oracle\product\10.2.0\flash_recovery_area\TEST1'
*.db_recovery_file_dest_size=2147483648
*.db_unique_name='test1'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=test1XDB)'
*.fal_client='test1'
*.fal_server='test2'
*.job_queue_processes=10
*.local_listener='test1'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(test1,test2)'
*.LOG_ARCHIVE_DEST_1='LOCATION=C:\Oracle\product\10.2.0\flash_recovery_area\TEST1
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=test1'
*.log_archive_dest_2='SERVICE=test2 ARCH MANDATORY
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=test2'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.log_file_name_convert='C:\Oracle\product\10.2.0\flash_recovery_area\TEST2','C:\Oracle\product\10.2.0\flash_recovery_area\TEST1',
'C:\Oracle\product\10.2.0\flash_recovery_area\TEST2\ONLINELOG','C:\Oracle\product\10.2.0\flash_recovery_area\TEST1\ONLINELOG',
'C:\Oracle\product\10.2.0\oradata\test2','C:\Oracle\product\10.2.0\oradata\test1',
'C:\Oracle\product\10.2.0\flash_recovery_area\TEST2\FLASHBACK','C:\Oracle\product\10.2.0\flash_recovery_area\TEST1\FLASHBACK'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.query_rewrite_enabled='true'
*.sga_target=167772160
*.undo_management='AUTO'
*.undo_retention=3600
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\test1\udump'
test2.__db_cache_size=79691776
test2.__java_pool_size=4194304
test2.__large_pool_size=4194304
test2.__shared_pool_size=71303168
test2.__streams_pool_size=0
*.archive_lag_target=1800
*.audit_file_dest='C:\oracle\product\10.2.0\admin\test2\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\test2\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\Oracle\product\10.2.0\oradata\test2\control01.ctl','C:\Oracle\product\10.2.0\oradata\test2\control02.ctl'
,'C:\Oracle\product\10.2.0\oradata\test2\control03.ctl'
#*.control_files='C:\Oracle\product\10.2.0\oradata\test2\test1_test2.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\test2\cdump'
*.db_block_size=8192
*.db_domain='appstech.local'
*.db_file_multiblock_read_count=16
*.db_file_name_convert='C:\Oracle\product\10.2.0\oradata\test1','C:\Oracle\product\10.2.0\oradata\test2'
*.db_name='test1'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=4147483648
*.dg_broker_start=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=test1XDB)'
*.db_unique_name='test2'
*.fal_client='test2'
*.fal_server='test1'
*.job_queue_processes=10
*.local_listener='test2'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(TEST1,TEST2)'
*.LOG_ARCHIVE_DEST_1='LOCATION=C:\Oracle\product\10.2.0\flash_recovery_area\TEST2\ARCHIVELOG
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=test2'
*.log_archive_dest_2='SERVICE=test1 LGWR ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=test1'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.log_file_name_convert='C:\Oracle\product\10.2.0\flash_recovery_area\TEST1\ONLINELOG\','C:\Oracle\product\10.2.0\flash_recovery_area\TEST2\ONLINELOG\'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.query_rewrite_enabled='TRUE'
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\test2\udump'
*.undo_retention=3600
*.db_create_file_dest='C:\Oracle\product\10.2.0\oradata\test2'
*.log_archive_start='TRUE'
*.log_archive_trace=2
*.remote_archive_enable='TRUE'Hello those are the latest logs I can see them over to the standby but they are not applied to them. I have set the LGWR on both log_archive_dest_2;
Regards
ompleted: alter database mount standby database
Thu May 14 11:18:15 2009
alter database recover managed standby database disconnect from session
MRP0 started with pid=18, OS id=3940
Managed Standby Recovery not using Real Time Apply
Media Recovery start incarnation depth : 1, target inc# : 4, irscn : 607856
Media Recovery Waiting for thread 1 sequence 3 branch(resetlogs_id) 686695334
Fetching gap sequence in thread 1 branch(resetlogs_id) 686695334, gap seq 3-3
Thu May 14 11:18:21 2009
Completed: alter database recover managed standby database disconnect from session
Thu May 14 11:18:51 2009
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 3-3
DBID 1063720110 branch 686695334
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Thu May 14 11:21:23 2009
Shutting down instance: further logons disabled
Thu May 14 11:21:23 2009
Stopping background process CJQ0
Thu May 14 11:21:24 2009
Stopping background process MMNL
Thu May 14 11:21:25 2009
Stopping background process MMON
Thu May 14 11:32:25 2009
Shutting down archive processes
Thu May 14 11:32:30 2009
ARCH shutting down
ARC2: Archival stopped
Thu May 14 11:32:31 2009
Errors in file c:\oracle\product\10.2.0\admin\test1\bdump\test1_arc1_1912.trc:
ORA-16401: archivelog rejected by RFS
Thu May 14 11:33:31 2009
Errors in file c:\oracle\product\10.2.0\admin\test1\bdump\test1_arc1_1912.trc:
ORA-16401: archivelog rejected by RFS
Thu May 14 11:34:31 2009
Errors in file c:\oracle\product\10.2.0\admin\test1\bdump\test1_arc1_1912.trc:
ORA-16401: archivelog rejected by RFS -
Workflow stopping @ beginning of sub workflow
Guys,
I am calling Sub workflow from MAIN workflow.
Processing of Main workflow stopping @ the STEP, wherein i trigger sub workflow.
The status is : In process. (it is a background task to trigger sub workflow)
If i process it manually with SWIA t-code , it is porcessing further.
But, it is not processing automatically.
Please guide.......
Regrads.
santosh.Hi Arghadip,
Design Description of MAIN WF.
BO: ZBUSECM(original: ECM).
1)WF get triggered by ECO(CC01).
2)ACTIVITY STEP to extract fields for both (Material & BOM ).
3)2 level FORK to trigger BOM & Material WF.
4) CONDITION to check flags for both BOM & Material.
5) BOM : if yes, reset flag to space & proceed. if no, no action. proceed further. till end of FORK.
6) MATERIAL :if yes,reset flag to space
6a)BLOCK to trigger material WF.
6b)STEP to Trigger material WF(This will call sub workflow).
6c)WAIT step to receive material WF "COMPLETED" event.
6d)ENDBLOCK to trigger material WF.
7) END of 2 level FORK.
8) ECH: Release ECO.
9) WAIT step to ECM Close.
10) Send mail for ECM Closure Notification.
11) WF Complete.
Design Description of Material(SUb) WF.
BO: ZBUS1001(supertypel: BUS1001006).
starting from 6b above.
1)WF get triggered by 6b event "INITIATE".
2)ACTIVITY STEP to send the material for editing to MM COntroller agent.
3) ACTIVITY STEP to send material for editing to fianance agent.
4) ACTIVITY STEP to complete the sub flow by triggering custom event "ZMANITRIGGERMATWFCOMPLETE" , which further calls the "COMPLETED" event by function module to hand over the control back to MAIN WF.
Now, the above mentioned step(4) is not handing over the control to main WF........
& also matnr is not being passed to sub flow now........
Regards & thanks.
santosh.
Edited by: santosh koraddi on Jun 22, 2010 7:22 PM -
Using Develop module on NEF stops 'Edit in Photoshop' command from working.
Started with LR5 CS6 CR8.1
Suddenly when a raw image has been porcessed by the Develop Module the (ctrl-E) 'open in Photoshop' command does not work for that image. It works for images that have not been 'developed'.
I have deleted LR preferences several times.
I have upgraded to LR5.2RC and CR8.2RC.
As far as I remember this catalog was new as LR5.
Any ideas please?Creating a new catalogue and importing the images does not resolve the problem.
The problem is only occuring on a few images from a particular collection.
Creating a virtual copy also will not edit in photoshop.
Creating a virtual copy and reseting the develop settings will allow the ctrl-e command to work.
However, manually re-applying the develop settings once again stops the ctrl-e command working. -
Hi everyone;
10.2.0.4 Standby database stopped recovery with the following error on alertlog.
Wed Jun 2 13:38:45 2010
RFS[4]: Archived Log: '/...../RCDB_2_1_720616127.arc'
RFS[4]: Physical Standby in the future of Branch(resetlogs_id) 720616127
RFS[4]: Standby database SCN: 2304:-276361630 Primary branch SCN: 2304:-1502231553
RFS[4]: New Archival REDO Branch(resetlogs_id): 720616127 Prior: 550946190
RFS[4]: Archival Activation ID: 0x5dfe4ed2 Current: 0x58adeb9a
RFS[4]: Effect of primary database OPEN RESETLOGS
Wed Jun 2 13:38:45 2010
There were no RESETLOGS operation on the primary side. What may be the cause of this error? Have any ideas?
Thanks..After trying to start recovery again:
MRP0: Background Managed Standby Recovery process started (RCDB)
Managed Standby Recovery not using Real Time Apply
Warning: Recovery target destination is in a sibling branch
of the controlfile checkpoint. Recovery will only recover
changes to datafiles.
Datafile 1 (ckpscn 9899623255650) is orphaned on incarnation#=1
MRP0: Background Media Recovery terminated with error 19909
Wed Jun 2 13:55:57 2010
Errors in file /.../rcdb_mrp0_16180.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/.../system01.dbf'
Wed Jun 2 13:55:57 2010
Errors in file /.../rcdb_mrp0_16180.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/.../system01.dbf'
Wed Jun 2 13:55:57 2010
MRP0: Background Media Recovery process shutdown (RCDB) -
Disp+work.exe stops *Emergency Shutdown*
After performing J2EE patch 13 upgrade the disp+work.exe stops. See developer trace below, Any help would be greatly appreciated.
Cheers,
Mark
trc file: "dev_disp", trc level: 1, release: "640"
Fri Sep 16 15:22:10 2005
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 848
***LOG Q00=> DpSapEnvInit, DPStart (00 848) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Fri Sep 16 15:22:15 2005
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 13160 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 1160000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 4065320)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4EC0
DpShMCreate: allocated tm_adm at 058C4EE8
DpShMCreate: allocated wp_ca_adm at 05B6BB30
DpShMCreate: allocated appc_ca_adm at 05B718F0
DpShMCreate: allocated comm_adm_list at 05B73830
DpShMCreate: allocated comm_adm at 05B73848
DpShMCreate: allocated vmc_adm_list at 05C8EB88
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05C8EBB0
DpShMCreate: allocated wall_adm at 05C8EBB8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1227 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( bwdev) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Sep 16 15:22:16 2005
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Fri Sep 16 15:22:55 2005
ERROR => W0 (pid 3304) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3104) died [dpxxdisp.c 12187]
ERROR => W2 (pid 3204) died [dpxxdisp.c 12187]
ERROR => W3 (pid 3496) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 3532) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 3612) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 2960) died [dpxxdisp.c 12187]
ERROR => W7 (pid 3704) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W8 (pid 2652) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W9 (pid 2660) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3304 (SIGUSR2)
ERROR => DpWpKill(3304, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3104 (SIGUSR2)
ERROR => DpWpKill(3104, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3204 (SIGUSR2)
ERROR => DpWpKill(3204, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3496 (SIGUSR2)
ERROR => DpWpKill(3496, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3532 (SIGUSR2)
ERROR => DpWpKill(3532, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3612 (SIGUSR2)
ERROR => DpWpKill(3612, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2960 (SIGUSR2)
ERROR => DpWpKill(2960, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3704 (SIGUSR2)
ERROR => DpWpKill(3704, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-2652 (SIGUSR2)
ERROR => DpWpKill(2652, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-2660 (SIGUSR2)
ERROR => DpWpKill(2660, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1621
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 16 15:23:05 2005
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Sep 16 19:23:05 2005
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3304 Ended no 1 0 0
1 DIA 3104 Ended no 1 0 0
2 DIA 3204 Ended no 1 0 0
3 DIA 3496 Ended no 1 0 0
4 UPD 3532 Ended no 1 0 0
5 ENQ 3612 Ended no 1 0 0
6 BTC 2960 Ended no 1 0 0
7 BTC 3704 Ended no 1 0 0
8 SPO 2652 Ended no 1 0 0
9 UP2 2660 Ended no 1 0 0
Dispatcher Queue Statistics Fri Sep 16 19:23:05 2005
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Fri Sep 16 19:23:05 2005
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Sep 16 19:23:05 2005
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1621
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 16 15:23:10 2005
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3192) (SOFT_KILL)
Stop icman
killing process (2900) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3192 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1621
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 16 15:23:11 2005
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3192 HANDLE:1600)
[DpProcDied] Process died (PID:2900 HANDLE:1592)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'bwdev'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/10
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1604
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 848) [dpxxdisp.c 8495]
Good Bye .....Sorry that I have not mentioned the problem
disp+work is stopped. please advise me.
here is the trace:
Copyright (c) 1993-1999 Microsoft Corp.
This file contains port numbers for well-known services defined by IANA
Format:
<service name> <port number>/<protocol> [aliases...] [#<comment>]
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users #Active users
systat 11/tcp users #Active users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote #Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen 19/udp ttytst source #Character generator
ftp-data 20/tcp #FTP, data
ftp 21/tcp #FTP. control
telnet 23/tcp
smtp 25/tcp mail #Simple Mail Transfer Protocol
time 37/tcp timserver
time 37/udp timserver
rlp 39/udp resource #Resource Location Protocol
nameserver 42/tcp name #Host Name Server
nameserver 42/udp name #Host Name Server
nicname 43/tcp whois
domain 53/tcp #Domain Name Server
domain 53/udp #Domain Name Server
bootps 67/udp dhcps #Bootstrap Protocol Server
bootpc 68/udp dhcpc #Bootstrap Protocol Client
tftp 69/udp #Trivial File Transfer
gopher 70/tcp
finger 79/tcp
http 80/tcp www www-http #World Wide Web
kerberos 88/tcp krb5 kerberos-sec #Kerberos
kerberos 88/udp krb5 kerberos-sec #Kerberos
hostname 101/tcp hostnames #NIC Host Name Server
iso-tsap 102/tcp #ISO-TSAP Class 0
rtelnet 107/tcp #Remote Telnet Service
pop2 109/tcp postoffice #Post Office Protocol - Version 2
pop3 110/tcp #Post Office Protocol - Version 3
sunrpc 111/tcp rpcbind portmap #SUN Remote Procedure Call
sunrpc 111/udp rpcbind portmap #SUN Remote Procedure Call
auth 113/tcp ident tap #Identification Protocol
uucp-path 117/tcp
nntp 119/tcp usenet #Network News Transfer Protocol
ntp 123/udp #Network Time Protocol
epmap 135/tcp loc-srv #DCE endpoint resolution
epmap 135/udp loc-srv #DCE endpoint resolution
netbios-ns 137/tcp nbname #NETBIOS Name Service
netbios-ns 137/udp nbname #NETBIOS Name Service
netbios-dgm 138/udp nbdatagram #NETBIOS Datagram Service
netbios-ssn 139/tcp nbsession #NETBIOS Session Service
imap 143/tcp imap4 #Internet Message Access Protocol
pcmail-srv 158/tcp #PCMail Server
snmp 161/udp #SNMP
snmptrap 162/udp snmp-trap #SNMP trap
print-srv 170/tcp #Network PostScript
bgp 179/tcp #Border Gateway Protocol
irc 194/tcp #Internet Relay Chat Protocol
ipx 213/udp #IPX over IP
ldap 389/tcp #Lightweight Directory Access Protocol
https 443/tcp MCom
https 443/udp MCom
microsoft-ds 445/tcp
microsoft-ds 445/udp
kpasswd 464/tcp # Kerberos (v5)
kpasswd 464/udp # Kerberos (v5)
isakmp 500/udp ike #Internet Key Exchange
exec 512/tcp #Remote Process Execution
biff 512/udp comsat
login 513/tcp #Remote Login
who 513/udp whod
cmd 514/tcp shell
syslog 514/udp
printer 515/tcp spooler
talk 517/udp
ntalk 518/udp
efs 520/tcp #Extended File Name Server
router 520/udp route routed
timed 525/udp timeserver
tempo 526/tcp newdate
courier 530/tcp rpc
conference 531/tcp chat
netnews 532/tcp readnews
netwall 533/udp #For emergency broadcasts
uucp 540/tcp uucpd
klogin 543/tcp #Kerberos login
kshell 544/tcp krcmd #Kerberos remote shell
new-rwho 550/udp new-who
remotefs 556/tcp rfs rfs_server
rmonitor 560/udp rmonitord
monitor 561/udp
ldaps 636/tcp sldap #LDAP over TLS/SSL
doom 666/tcp #Doom Id Software
doom 666/udp #Doom Id Software
kerberos-adm 749/tcp #Kerberos administration
kerberos-adm 749/udp #Kerberos administration
kerberos-iv 750/udp #Kerberos version IV
kpop 1109/tcp #Kerberos POP
phone 1167/udp #Conference calling
ms-sql-s 1433/tcp #Microsoft-SQL-Server
ms-sql-s 1433/udp #Microsoft-SQL-Server
ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
ms-sql-m 1434/udp #Microsoft-SQL-Monitor
wins 1512/tcp #Microsoft Windows Internet Name Service
wins 1512/udp #Microsoft Windows Internet Name Service
ingreslock 1524/tcp ingres
l2tp 1701/udp #Layer Two Tunneling Protocol
pptp 1723/tcp #Point-to-point tunnelling protocol
radius 1812/udp #RADIUS authentication protocol
radacct 1813/udp #RADIUS accounting protocol
nfsd 2049/udp nfs #NFS server
knetd 2053/tcp #Kerberos de-multiplexor
man 9535/tcp #Remote Man Server
sapgw00s 4800/tcp # sap secured gateway
sapsp00 3400/tcp #
sapms00 3500/tcp
sapmsC11 3600/tcp
sapdp00 3200/tcp # sap dispatcher
sapdp01 3201/tcp
sapdp02 3202/tcp
sapdp03 3203/tcp
sapdp04 3204/tcp
sapdp05 3205/tcp
sapdp06 3206/tcp
sapdp07 3207/tcp
sapdp08 3208/tcp
sapdp09 3209/tcp
sapdp10 3210/tcp
sapdp11 3211/tcp
sapdp12 3212/tcp
sapdp13 3213/tcp
sapdp14 3214/tcp
sapdp15 3215/tcp
sapdp16 3216/tcp
sapdp17 3217/tcp
sapdp18 3218/tcp
sapdp19 3219/tcp
sapdp20 3220/tcp
sapdp21 3221/tcp
sapdp22 3222/tcp
sapdp23 3223/tcp
sapdp24 3224/tcp
sapdp25 3225/tcp
sapdp26 3226/tcp
sapdp27 3227/tcp
sapdp28 3228/tcp
sapdp29 3229/tcp
sapdp30 3230/tcp
sapdp31 3231/tcp
sapdp32 3232/tcp
sapdp33 3233/tcp
sapdp34 3234/tcp
sapdp35 3235/tcp
sapdp36 3236/tcp
sapdp37 3237/tcp
sapdp38 3238/tcp
sapdp39 3239/tcp
sapdp40 3240/tcp
sapdp41 3241/tcp
sapdp42 3242/tcp
sapdp43 3243/tcp
sapdp44 3244/tcp
sapdp45 3245/tcp
sapdp46 3246/tcp
sapdp47 3247/tcp
sapdp48 3248/tcp
sapdp49 3249/tcp
sapdp50 3250/tcp
sapdp51 3251/tcp
sapdp52 3252/tcp
sapdp53 3253/tcp
sapdp54 3254/tcp
sapdp55 3255/tcp
sapdp56 3256/tcp
sapdp57 3257/tcp
sapdp58 3258/tcp
sapdp59 3259/tcp
sapdp60 3260/tcp
sapdp61 3261/tcp
sapdp62 3262/tcp
sapdp63 3263/tcp
sapdp64 3264/tcp
sapdp65 3265/tcp
sapdp66 3266/tcp
sapdp67 3267/tcp
sapdp68 3268/tcp
sapdp69 3269/tcp
sapdp70 3270/tcp
sapdp71 3271/tcp
sapdp72 3272/tcp
sapdp73 3273/tcp
sapdp74 3274/tcp
sapdp75 3275/tcp
sapdp76 3276/tcp
sapdp77 3277/tcp
sapdp78 3278/tcp
sapdp79 3279/tcp
sapdp80 3280/tcp
sapdp81 3281/tcp
sapdp82 3282/tcp
sapdp83 3283/tcp
sapdp84 3284/tcp
sapdp85 3285/tcp
sapdp86 3286/tcp
sapdp87 3287/tcp
sapdp88 3288/tcp
sapdp89 3289/tcp
sapdp90 3290/tcp
sapdp91 3291/tcp
sapdp92 3292/tcp
sapdp93 3293/tcp
sapdp94 3294/tcp
sapdp95 3295/tcp
sapdp96 3296/tcp
sapdp97 3297/tcp
sapdp98 3298/tcp
sapdp99 3299/tcp
sapgw00 3300/tcp # sap gateway
sapgw01 3301/tcp
sapgw02 3302/tcp
sapgw03 3303/tcp
sapgw04 3304/tcp
sapgw05 3305/tcp
sapgw06 3306/tcp
sapgw07 3307/tcp
sapgw08 3308/tcp
sapgw09 3309/tcp
sapgw10 3310/tcp
sapgw11 3311/tcp
sapgw12 3312/tcp
sapgw13 3313/tcp
sapgw14 3314/tcp
sapgw15 3315/tcp
sapgw16 3316/tcp
sapgw17 3317/tcp
sapgw18 3318/tcp
sapgw19 3319/tcp
sapgw20 3320/tcp
sapgw21 3321/tcp
sapgw22 3322/tcp
sapgw23 3323/tcp
sapgw24 3324/tcp
sapgw25 3325/tcp
sapgw26 3326/tcp
sapgw27 3327/tcp
sapgw28 3328/tcp
sapgw29 3329/tcp
sapgw30 3330/tcp
sapgw31 3331/tcp
sapgw32 3332/tcp
sapgw33 3333/tcp
sapgw34 3334/tcp
sapgw35 3335/tcp
sapgw36 3336/tcp
sapgw37 3337/tcp
sapgw38 3338/tcp
sapgw39 3339/tcp
sapgw40 3340/tcp
sapgw41 3341/tcp
sapgw42 3342/tcp
sapgw43 3343/tcp
sapgw44 3344/tcp
sapgw45 3345/tcp
sapgw46 3346/tcp
sapgw47 3347/tcp
sapgw48 3348/tcp
sapgw49 3349/tcp
sapgw50 3350/tcp
sapgw51 3351/tcp
sapgw52 3352/tcp
sapgw53 3353/tcp
sapgw54 3354/tcp
sapgw55 3355/tcp
sapgw56 3356/tcp
sapgw57 3357/tcp
sapgw58 3358/tcp
sapgw59 3359/tcp
sapgw60 3360/tcp
sapgw61 3361/tcp
sapgw62 3362/tcp
sapgw63 3363/tcp
sapgw64 3364/tcp
sapgw65 3365/tcp
sapgw66 3366/tcp
sapgw67 3367/tcp
sapgw68 3368/tcp
sapgw69 3369/tcp
sapgw70 3370/tcp
sapgw71 3371/tcp
sapgw72 3372/tcp
sapgw73 3373/tcp
sapgw74 3374/tcp
sapgw75 3375/tcp
sapgw76 3376/tcp
sapgw77 3377/tcp
sapgw78 3378/tcp
sapgw79 3379/tcp
sapgw80 3380/tcp
sapgw81 3381/tcp
sapgw82 3382/tcp
sapgw83 3383/tcp
sapgw84 3384/tcp
sapgw85 3385/tcp
sapgw86 3386/tcp
sapgw87 3387/tcp
sapgw88 3388/tcp
sapgw89 3389/tcp
sapgw90 3390/tcp
sapgw91 3391/tcp
sapgw92 3392/tcp
sapgw93 3393/tcp
sapgw94 3394/tcp
sapgw95 3395/tcp
sapgw96 3396/tcp
sapgw97 3397/tcp
sapgw98 3398/tcp
sapgw99 3399/tcp
trc file: "dev_disp", trc level: 1, release: "46D"
Fri Sep 16 16:45:39 2005
relno 4640
patchlevel 0
patchno 748
intno 0
pid 2092
***LOG Q00=> DpSapEnvInit, DPStart (00 2092) [dpxxdisp.c 878]
MtxInit: -2 0 0
MBUF state OFF
MBUF opmode USE
Fri Sep 16 16:45:40 2005
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 360 MB
<ES> 359 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( erp) [dpxxdisp.c 7536]
MBUF set hwid_state to HWID_PENDING
CCMS: Initalizing shared memory of size 10000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 4640, patchlevel 0
MBUF state PREPARED
MBUF component UP
MBUF set hwid_state to SAP_O_K (P0427188049 )
DpMsgAdmin: Set patchno for this platform to 748
Release check o.K.
Fri Sep 16 16:47:40 2005
ERROR => W0 (pid 1768) died [dpxxdisp.c 9723]
ERROR => W1 (pid 1284) died [dpxxdisp.c 9723]
ERROR => W2 (pid 896) died [dpxxdisp.c 9723]
ERROR => W3 (pid 2088) died [dpxxdisp.c 9723]
ERROR => W4 (pid 1204) died [dpxxdisp.c 9723]
ERROR => W5 (pid 628) died [dpxxdisp.c 9723]
ERROR => W6 (pid 1624) died [dpxxdisp.c 9723]
ERROR => W7 (pid 880) died [dpxxdisp.c 9723]
ERROR => W8 (pid 812) died [dpxxdisp.c 9723]
ERROR => W9 (pid 672) died [dpxxdisp.c 9723]
ERROR => W10 (pid 1168) died [dpxxdisp.c 9723]
ERROR => W11 (pid 1160) died [dpxxdisp.c 9723]
ERROR => W12 (pid 1152) died [dpxxdisp.c 9723]
ERROR => W13 (pid 1144) died [dpxxdisp.c 9723]
ERROR => W14 (pid 1136) died [dpxxdisp.c 9723]
my types changed after wp death/restart 0x3f --> 0x0
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
Fri Sep 16 16:47:41 2005
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 7741]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 2092) [dpxxdisp.c 6458]
please advise ?? -
I have multiple family members using one apple id and all of our data is going onto each others phones/how do i stop this?
Each person needs to have their own separate Apple ID along with their own separate computer user account and iTunes Library.
-
My 5th gen iPod touh was stolen a month ago. I immediately removed that device from my account and yet today I looked at my photostream and there are tons of pics of these people on my photostream. How do I get this to stop?!?
Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.
-
Hi All,
I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
I have tried the following:
reset IIS
restarted the Timer Service
When I try to use powershell command to stop I get the following error:
Can anyone who went through this help PLEASE
Stop-SPServiceInstance : An object of the type
Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
"job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named
"SPTimerV4". Rename your object or delete the existing object.
At line:1 char:127
+ ... pplication"} | Stop-SPServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
ception
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
iceInstanceHi,
It seems that the issue is in the timer job definition for executing this operation.
My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
This might be helpful:
http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job
I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm.
BR,
Ivan -
IPhone mail app stopped pushing mail
I am having the same problem with all 3 of my mail accounts including my mac mail and gmail. I've tried all of the fixes, resetting the accounts, restarting the phone, etc.. but as of four days ago, it simply stopped pushing email in or out. It looks like it's trying with the spinning wheel at the bottom, but the wheel doesn't appear at the top of the screen so I know it's actually accessing the server. I can still access the Internet and such, so it's not a connection problem.
Please advise.Try locating and deleting these two preference/plist files:
~(yourUserName)/Library/Preferences/com.apple.mail.plist
~(yourUserName)/Library/Preferences/com.apple.LaunchServices.plist -
It started yesterday when i was listening to itunes when all of a sudden the music stopped playing and i had to hold down the power button to shut it down and reboot, and then, when i logged back in, the error sound played, and then finder opened up, but the window was grayed out like i had another app selected, bu i didn't, so i tried to open up itunes and the icon started bouncing and then it stopped midbounce and i had to reboot again because finder wasnt responding. now when i log in, the error sound plays, and finder immediately stops working and then i have to reboot again because i cant click anything and i cant properly relaunch finder. please help
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Itunes wont open and recently stop giveing the quit unexepectly meesage.
well one day i was burning song songs off itunes and itunes quit everrytime i tryied to reopen it gave me the quit unexepectedly message. i took a few tips from other post but these did not help. i tunes just stop show in the message. it jumps once like its about to activate but stops and does nothing if there is some one who can help me please do i need new music for my ipod sos please
Thanx alot for all your answers.idid do it on my own
-
I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???
First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)!
Maybe you are looking for
-
Hi, I am trying an application of Noise Tracker. I am using the PXI DSA board (4472) to track the sound and I am using 7 microphones. I am planning to integrate this array with a camera, (probably a fire wire camera with CVS). I need some help on noi
-
Error on opening links in Firefox from email in Thunderbird
Using Windows 7 sp1, 32 bit. My default browser is set to Firefox, and all http or https links from any program are opened in Firefox. There is no problem doing this from any program except from Thunderbird. It's fine if Firefox is not already open,
-
Hi I want to generate a txt file from a IDoc on the app server...i have used a file port and provided a physical path there which is also available in AL11 when i trigger the idoc it is giving status 03 however the file is not getting generated in th
-
Xerces SAX parser don`t initialize a characters array
Xerces SAX parser don`t initialize a characters array from characters() method in DefaultHandler. I use jdk 1.5.12. For value "22-11-2009" variables start=1991, length=9. Result: "22-11-200"
-
I've set up the *&*%$ testing server - now can I please add a recordset?
I run into this problem occasionally with DW. I set up an asp site using aspVBscript. When I go to add server behaviors the application box has the first two item s ticked (Create a site for this file, and Choose a document type) but the third, "Set