RH6.2-8.1.6 Summary?

Okay - so the docs don't correctly reflect the need to recompile. Good, I think, but if I did, I don't have a [bold]sem.h[bold] file. (I do have the other one, and a little hacking is what we do best, right?)
The other issues I see are to use Gnome Enlightenment, and possibly ad dl'd jre.
IS THERE ANYTHING ELSE I SHOULD WATCH FOR?
null

Well, I did get it working. Install went fine, and I built a custom database.
I was wondering for a bit, as one section of the Java server took a VERY LONG TIME. (I monitored the alert log to see log switches, else I would have thought it was locked up.)
I also have to mention that I don't feel the default uses enough env variables. Coming from ORacle on OpenVMS, I like the way ORA_DB points to ORAUSER_:DB_NAME, which sets env var's (logicals) for Ora_cntlX, ORA_DUMP, ORA_ROOT, ORA_TRACE, ORA_NETWORK, etc.
Morc: thanks for that incredible reference. I will be printing that out 1st thing in the morning.
What confuses me, is I thought I installed Kerner Headers and Kernal Source, as I did a 'custom install' and for packages I selected everything?
Could this be more wrye Linux humor, ie Everything doesn't really mean EVERYTHING?
IF so, can you point me to an RPM that has that? (I dl'd the RH6.2 ISO from the web and burned the cd.)
Thanks a ton!
Doug
null

Similar Messages

Report for open order and shipped qty summary

Dear Folks,
           Can any one please help me.
Report for open order summary Vs shipped quantity
what are the related programs to it.
throw some light on it.

>
arpita b wrote:
> Dear rohit
>
>     Iam asking about any report which compares or give details of open order vs shipped qty.
>
> Any sis report is available for this?
Hi Arpita,
There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
If you want, I will send you the list of all T.codes used to generate reports in SD.
Revert back to me if you need the same.
Regards,
Swapna D.

Report Performance - Summary Fields Setting

I have a report data model with 3 groupings. Summary fields are needed for each group. There are 2 approaches for me to have the summary values :
1. i can set the data source of each summary field to be the corresponding column of my based Q_1 selection statement, and then set the "Reset At" for different data groups.
2. On the other hand, i can set the data source to be the summary field of the inner data group.
Could anyone tell me which method can give me a better performance? I want the report to run faster.

Puvan,
I figured out the problem myself. It is not a version issue.
I was using a sum function on a decode expression in the sql command. The % total was applied on that sum expression. Every time I was reopening the report the sum expression was getting created in a new group.
When I gave an alias for the sum(decode(xyz)) expression it is working fine now.
I would still consider that as an issue with Reports Developer.
FYI...
Ritendra.

Multiple blog summary pages

I'm creating a new website for sharing news and photos for my family. I want to use the iWeb blog for my entries and plan to do some customization of my site through HTML snippits, iFrames, etc. I've been reading quite a bit on this forum and other useful sites on how to do more with iWeb, but I can't seem to find a solution for the following problem.
Let's say I allow 15 blog entries to be shown on my blog summary page yet over time I build a site with 50 or more entries. Then at least 35 will be on the archive page and that's alot to scroll through. I'd like to have the first 15 on blog summary page 1 then the next 15 on blog summary page 2, etc. Call it multiple archive pages if you will. But I want iWeb to keep track of the blog entries on those additional pages instead of me having to create new non-blog pages and copy and paste links to my entries.
Here's an example
http://allaboutiweb.com/
Any way to do this with iWeb 09?
FYI, I know there are a lot of other blogging software and hosting sites out there, but I want to use iWeb 09 because I've already created one site in the past with iWeb so I'm familiar with it. I also have a Mobile Me account with a domain name through goDaddy, so I'm publishing my iWeb site to Mobile Me with password protection.
Appreciate the help.

first, iweb limits blog summary to display 50 entries, so you are kinda limited if you want to have a continuous blog over the years.
if you have less than 50 entries per year, you have to break your blog into the year and have a master archive page and link all archive blog(s) to it.
once you decide what to do, you can use iweb rss feed widget to display the archive as feed, but i don't recommend iweb rss feed widget because it depends on mme server, unreliable at best.
instead you can use yahoo's pipes: http://pipes.yahoo.com/pipes/
yahoo pipes is reliable and flexible, you can build your own feed that you can merge other feeds into one or keep them separate, here is my example of merged feeds:
http://www.cyclosaurus.com/Home/CyclosaurusBlog/Entries/2009/7/25Not_iWebWidget.html
or you can tag blog entries by key words or categories, your users can narrow down the entries display with it, here my iweb blog tagging (click on any tagged word on the right side):
http://www.cyclosaurus.com/Home/CyclosaurusBlog/Archive.html
all code is linked to my examples. to do the above, you need to know yahoo pipes, ajax/javascript and iweb inner working parts.

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

IPod Touch syncing no longer showing summary screen on my computer

I transfered all my iTunes library onto my new computer and am now syncing my i-Pod touch to it. At the same time I am upgrading to 3.O. Suddenly I no longer can see my Ipod touch in Itunes listing on left hand side nor does it show the summary screen so I can tell how long my syncing will take. It seems like hours now that my iPod Touch is syncing (per the message on my ipod). How can I make my computer display the summary screen?

I'm having the same exact problem. The thing is...you can even see the songs that you've purchased on your ipod on the left still...it's just that the ipod itself won't show. So I can see what songs I've purchased on my ipod...but I can't put anything on or take any off. I've tried shutting down and restarting...reinstalling itunes...all of that stuff. Nothing has worked.

How can I move a task from a Summary Task to another Summary Task in the same task list?

Hey, I tried to move tasks through the SP UI from one Summary Task to other in the same task list, but I didn't find possibility for it.
Then I spent time to learn the SP Client Object Model and now I can read tasks form the list. I see every task has a "FileRef" and a "FileDirRef" field. If I think right these fields show the relation between list elements for example between
a Task and a Summary Task elements.
I changed these fields' values and I tried to Update the ListItem but I got this error message: "Invalid data has been used to update the list item. The field you are trying to update may be read only."
I really need to move tasks what were created below a wrong Summary Task so please explain a method or pattern how I can do this. (I can create a new Task below to any Summary Task and I can set field values but I hope there is a way to really move tasks (I
mean I should change the right field values somehow.).
I can reach the Task List both on the server and client side so I'm very interested in every solution. PowerShell solution is also good for me.
I'm using SharePoint 2010 SP2.
Thank you for your answer and your time. :)
Csaba Marosi

Hi,
According to your post, my understanding is that you want to move a task from one summary task to another in the same task list.
We can do it like this:
We can create a Gantt View for this task list, then copy your tasks inside a summary task, then navigate back to the other summary and paste, then go back to original and delete.
Here is another way for your reference:
SharePoint vs Powershell – Moving List Items between folders
http://sharepointstruggle.blogspot.in/2010/07/sharepoint-vs-powershell-moving-list.html
Best Regards
Dennis Guo
TechNet Community Support

When i log on to thunderbird, the in box has the message, 'building summary file', this then takes ages to do . how do I stop it doing this every time I log on?

Hello,
This problem has only started happening in the last few days. Every time i log on the get emails, the inbox has a message saying 'building summary file'. it then takes ages to do this. i have tried deleting most of the in box and compacting the file but it still continues.

Try restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

Functions in Calculation and Summary Fields

Hi,
I'll give a bit of background to my situation before describing the advice I'm looking for here.
I am experienced Mac user and I have used AW a fair bit in the past, but since I've been working in a job which has Windows machines and uses a complex custom-written relational database for its main tool, I use it less often than I did, so I am a little rusty. It is the shortcomings of the complex relational database (which I do not have admin rights to) that has led me back to AW and its database module.
Essentially, I am a complaints investigator, and the relational database provided by my employer is used to keep track of correspondence and various metadata associated with the investigation of the complaint. However, although it is called a Complaints Management System (CMS), it does not help me manage my caseload very well. I've previously tried to create an Excel spreadsheet that would help me manage my work, but it is not a database (or I am not sufficiently skilled with Excel) and I cannot get it to provide me with what I want.
So, my problems.
I have complaints (cases) assigned to me to investigate. These cases have differing priorities, which means differing time limits for completion of the investigation. The priorities and time limits are set out below:
J (jurisdictional issues) - time limit = 1 month
D (discretion not to investigate) - time limit = 3 months
1 - time limit = 4 months
2 - time limit = 6 months
3 - time limit = 12 months
The priority field in my AW DB is currently a 'pop-up menu' field, but I could change this to another type if this would be advisable.
I have a date-type field in which I enter the date the complaint was received. I have an calculation-type field in which I calculate the age of the complaint using the function:
=(NOW()-'DateReceived')
This returns an age in days, which I input into a separate calculation field that divides the result of 'age in days' by 30, to give a rough approximation of the number of months old the complaint is (If AW has an equivalent to Excel's 'workdays' variable, I'd love to hear about it). This latter field is the one that I display in the main data entry view of the database.
Given the priority assigned to the complaint, and the age of it, I am either 'On Target' or 'Over Target' for completing the investigation.
Each month I have a meeting with my manager to review progress, and since the reports that can be extracted from the CMS are not very useful for this purpose, I want my AW database to help me generate reports that can form the basis of discussion in these meetings.
Part A of My Query
At present, I have a manually operated field, in the form of a pop-up menu, to indicate for each record (complaint) whether I am over or on target for completion of the investigation. I would like to make this a calculated field, so that the database keeps track of this for me automatically. Unfortunately, I'm either too dense, or not good enough with the syntax of AW functions, to be able to write a function which essentially does the following:
IF 'Priority'=1 AND 'Age in Months'<4 THEN 'On Target' ELSE 'Over Target'
- and then repeats that for the other priority possibilities. It seems likely that the 'IF' function is what I'm after, but I haven't been able to get the syntax right to combine 'Priority' and 'Age in Months' in the format spelt out in the AW help, which is:
=IF(logical,true value,false value)
Getting the syntax of one part of this function right would be a good start. However, I suspect that I have a larger problem, in that I have 5 priorities to measure against and I need the overall calculation (that produces the 'On Target' or 'Over Target' results) to report in one result field. This means nesting the functions that look at the 5 priorities and 5 age limits. I've tried and failed to get the syntax of such nesting right, so advice on this is doubly welcome.
Unfortunately, I have a sneaking suspicion that unless the answer is much more concise than I imagine it to be, there will be an additional problem: AW appears to have a character limit for the length of a function string in a calculation field which may be too short for my needs. If you think this is an issue but that it can be solved through the use of intermediate fields (which don't need to be displayed in the main 'data entry' layout), I'm happy to give that a shot.
Part B of my Query
Even if the problem above cannot be solved, and I have to manually enter whether a complaint is 'On Target' or 'Over Target', I have a separate but related question for the reports I have to present to my manager.
On these reports, I would like to have a summary at the top of the first page (in a grand-summary part, I assume) which gives a count of how many complaints are 'On Target' or 'Over Target' for each priority. Below that is a sub-summary part, ordered by the type of action that must next be taken in the investigation. (Getting that right may be a subject of a separate post at a later date.) The report must, of course, only report on those complaints that are still being investigated ('open complaints') and not those which have been completed ('closed complaints'). So, I need a function in a summary field which will present an accurate count of the number of open complaints that are 'on target' for priority J (with separate summary fields that do the same thing for priorities D, 1, 2, and 3), and a separate set of summary fields that will present a count of open complaints that are 'over target' for each type of priority.
It might look a bit like this table below, with figures from the summary fields populating the cells in the third row:
Priority
J
D
1
2
3
In / Out of Target
In
Out
In
Out
In
Out
In
Out
In
Out
Number of Complaints
My guess is that it is easier to have the summary field simply count all the complaints that are on or over target for a given priority, regardless of whether they are open or closed, since the report could be based on a saved search (match) which strips out all closed complaints. But if I'm off-beam with that idea, I'm happy to have another way of cracking this nut.
Many thanks in advance to any Community members that take the time to try and help me with this.
Andrew
PS Cross posted in AWUG forum too, if people prefer to answer there.

Hi Andrew,
Part A:
I've done some restating of the question, and distributed the calculations among several fields, not all of which need to be included on the visible layout. Other than formatting the Date fields and moving the 'Completed Date' field and its label, I've left this in the default "Layout 1" produced by AppleWorks.
Field List:
Priority: Popup menu with six items: 00, J, D, 1, 2, 3 Defaults to 00
TL (time limit in months): Calculation: CHOOSE('Priority',0,1,3,4,6,12)
Received: Date. Option: Automatically insert today's date (ie. Date Record created) (may be edited)
Target Date: Calculation:
DATE(YEAR('Received')+INT(MONTH('Received')+'TL')/12,MOD(MONTH('Received')+'TL', 12),DAY('Received'))
Remaining (Days): Calculation: INT('Target Date'+1-NOW()) (see revision below)
Completed: Checkbox. Set default value to Unchecked.
Completed Date: Date: Entered manually
OnTarget: Calculation: IF('Completed',IF('Completed Date'<'Target Date',"On Target","Over"),IF(INT(NOW())>'Target Date',"Over","On Target"))
The On Target field shows the current status of the case while still open, and the state on the closing date when it was closed.
Having done that, I was unhappy with the Remaining field continuing to calculate an ever larger negative number after the case had been closed. Hence this revision below:
Remaining: Calculation: IF('Completed','Target Date'-'Completed Date',INT('Target Date'+1-NOW()))
Shows the number of days remaining while the case is open, the days remaining at completion if the case has been marked Completed and the completion date entered.
Rsults (and some further formatting of the Layout) below.
Part B:
You will need Subsummary parts when sorted on Completed and on On Target. Fields can appear on a Layout only once, so each subsummary part will need a separate Summary type field for each field to be summarized.
Regards,
Barry

Summary of a table in SQL

I need a query to print summary of table in a single query without using PLSQL..
table list
with t as
select 1 table_number , 't1' table_name from dual
union all
select 2 table_number , 't2' table_name from dual
union all
select 2 table_number , 't3' table_name from dual
select * from t;
Table1
with t1 as
select 'US' country_code , 'SYSTEM1' source, 1 emp_num , 'Not Processed' status from dual
union all
select 'India' country_code , 'SYSTEM1' source, 2 emp_num , 'Valid' status from dual
union all
select 'India' country_code , 'SYSTEM2' source, 3 emp_num , 'Error' status from dual
union all
select 'India' country_code , 'SYSTEM2' source, 4 emp_num , 'Valid' status from dual
select * from t1;
i need a query where with input parameter as table_number...
for eg 1 .. i want the output should be grouped by table_name ,country_code and source
output like
table_name country_code source total_records valid_records error_records not_processed_records valid_records_percentage
t1         India       SYSTEM1 1             1             0              0                     100
t1         India       SYSTEM2 2             1             1              0                     50
t1         US          SYSTEM1 1             0             0              1                     0
Total                                     4             2             1              1                     50
and i need total for these in last record

Are you looking to get the table name dynamically? In that case try this.
SQL> select * from t;
TABLE_NUMBER TABLE_NAME
           1 t1
           2 t2
           2 t3
SQL> select * from t1;
COUNTRY_CODE SOURCE     EMP_NUM STATUS
US            SYSTEM1          1 Not Processed
India         SYSTEM1          2 Valid
India         SYSTEM2          3 Error
India         SYSTEM2          4 Valid
SQL> select case when grouping_id(table_name)
2                 + grouping_id(country_code)
3                 + grouping_id(source_) = 0 then table_name
4              else 'Total'
5         end table_name
6       , country_code
7       , source_
8       , count(*) total_record
9       , count(decode(status, 'Not Processed', 1)) not_processed
10       , count(decode(status, 'Valid', 1)) valid
11       , count(decode(status, 'Error', 1)) error_
12    from (
13            select t.table_name
14                 , t1.country_code
15                 , t1.source_
16                 , t1.emp_num
17                 , t1.status
18              from (
19                      select table_name
20                           , dbms_xmlgen.getxmltype('select * from ' || table_name) xml_output
21                        from t
22                       where table_number = 1
23                   ) t
24                 , xmltable
25                   (
26                      '/ROWSET/ROW' passing t.xml_output
27                      columns
28                      country_code varchar2(100) path 'COUNTRY_CODE',
29                      source_      varchar2(100) path 'SOURCE',
30                      emp_num      number        path 'EMP_NUM',
31                      status       varchar2(100) path 'STATUS'
32                   ) t1
33         )
34   group
35      by rollup
36         (
37            table_name
38          , country_code
39          , source_
40         )
41 having grouping_id(table_name)
42       + grouping_id(country_code)
43       + grouping_id(source_) in (0, 3);
TABLE_NAME COUNTRY_CODE SOURCE_    TOTAL_RECORD NOT_PROCESSED      VALID     ERROR_
t1          US            SYSTEM1               1             1          0          0
t1          India         SYSTEM1               1             0          1          0
t1          India         SYSTEM2               2             0          1          1
Total                                           4             1          2          1
SQL>
For this to work all the table that are passed must have the same structure. But then comes the question why do you have different table with same structure

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually.

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!

Have you tried deleting the songs from Settings?
Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.

Displaying the TOC of a RH6 project in RH8

As a companion question to my other recent post re RH6 to RH8 TOC, specifically:
If I have a RH6 project which I open in RH8, how do I display the TOC of the RH6 project without creating a brand new one so I can view and edit it?

Apologies if I have misunderstood your question but just try double clicking on the TOC file that has been updated from RH6 when you opened the project in RH8. You'll find it in the Project Set-up pod.
Read the RoboColum(n) for mutterings on RoboHelp, Technical Communication Suite and technical communication.

NULL Value in Journal Entry and Wrong Tax Summary

Hi people,
I need your expert help for a big problem that appens to some customers.
They run SAP BO 8.8 SP:00 PL:12
This is the scenario:
You insert a new documet, A/R Invoice or A/P Invoice is the same, problem appear in all of them.
After you insert the document, using SQL Server Management try this Select statment:
Select * from JDT1 where JDT1.debit is null OR JDT1.credit is null
A list of record where listed. And, this is the problem, NULL values are all in the VAT Lines in debit or credit colums.
If you try to make a SUM(debit-credit) you discovery that, 1000,00-null=null
Consequently, TAX Sumary report, that probably use arithmetic operation like me in SELECT statment, count a wrong number when null values in DEBIT or CREDIT column in JDT1 for VAT declaration.
How could I solve? And how i can make invoices store 0 rather than NULL in the VAT Line?
Thanks in advance for your tips and solutions

Thaks Neetu for your answer.
I thinks there is a misurandertanding.
My problem is not SQL.
My problem is the SAP TAX Report.
I used SQL only for check data and discover why SAP raise a wrong TAX Summary report.
So, my question is: Why invoices write null values in journal entry, and how I can solve the problem that TAX summary report use null value in operations so the results are wrong.
Thanks,
Jonny Cortonicchi

Installation problem 8.0.5 on RH6.2

I've installed this many times on various Dell machines with no problems, following the guide on jordan.fortwayne.com.
However, I am having problems with the latest box from DELL. It's poweredge 2400 with RH6.2.
Upon creating database objects, the installer takes a long time and the proceeds with the error message. The log file contains the following error:
ORA-00445: background process "PMON" did not start after 120 seconds.
I followed the guide as usual. I had a small problem with rpm's because the rpm kept saying that rpms were installed, while when i tried doing rpm erase, it was saying they were not installed. I decided to force install by doing rpm -ivh force <name>. In either case, binaries don't core dump at this point. I can enter sqlplus and it gives me log in prompt. Interestingly though when I type exit it just hangs.
Any help would really be appreciated.
Thanks

Try putting
disable_oob = ON
in your sqlnet.ora file.
Anwar.
Radek Sedmak (guest) wrote:
: Hi Everybody,
: I have this problem, i have running oracle 8.0.5 on RH6.0
: everything works ok for me. But when i use sqlplus on box where
: is my Oracle running and try to connect to another database on
: my site (which is running on HPUX) I got resul ORA-01017
invalid
: username/password. Tnsping to this machine is ok, so i have
this
: in my tnsname.ora When i create dabase link (with user which I
: try to use to connect remote database) on my local datbase to
: this database then link works sucessfully too. select * from
: dual@remote_database Ok. What's wrong ??? Remote database is
: Oracle 7.3.4.3 on HPUX. Any difference between SQL*Net of
: Oracle7 and 8 ???
null

How do I know if my iphone has successfully been backed up to my iTunes? I plugged it in and it said it backed up and I did a sync, but when I am looking through the summary page and I am not sure that all of my data got backed up. Please help!!

I have never backed up my iphone to my itunes because I always used the cloud. However, a few months ago, my wifi disk in my phone burned out so the Apple Store told me to back up everything to my itunes. I am going today to get the iphone 6 so I connected my phone (iphone 4S) to my itunes and I backed up and synced. However, when I look throughout the summary page and click in different areas (Photos, Movies), I don't see any of my data -- it is still asking me to Sync from iPhoto or to sync from another location. By backing up & syncing my phone, did all of my data get saved? Or do I still need to do more steps?
Sorry for the long winded question, I am just so nervous to get a new phone and plug it in to be restored and not have any of my pictures, videos or contacts, etc. Any help would be so so appreciated!

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

RH6.2-8.1.6 Summary?

Similar Messages

Maybe you are looking for