Rich Tree Table Drop duplicate Row Keys (from different Rich Tables)

Hello.
My scenario looks like this:
Two tables (lets say productTable, and taskTable) as drag sources.
One Tree Table ( that should have the productTable items as a parent node, and the childNodes would be taskTable items), as a drop target..
In my test case, I was able to drag a row from a table, and drop it in a Tree Table. I could also program my drop listener in such a way that I could create child nodes. In my case I will only have 1 child node.
- Parent Node 1
- Child Node 1
- Child node 2
- Child node 3
- Parent Node 2
-Child node 4
Example of my Tables
Products
prod1
prod2
prod3
Tasks
Task1
Task2
Task3
Task4
If I drag prod1 to the tree table, and then drag task1, to the treetable (on top of the prod1), I can't release the task1. The component will not accept this draggable item. If I drag any other task, other than task1, I can successfully insert this tag as a child node. I think it has something to do with the Row key. I'm using the dataFlavor as:
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="ProductTaskModel"/>
I think it has something to do with the row key, because if I drag prod2 to the treeTable and then try to put task2 in prod2 I get the same problem. I'm guessing that adf faces rc is generating the same row key for prod and task, and the tree table does not accept the same row key on top of the same row key.
prod1 - rk=1
prod2 - rk=2
prod3 - rk=3
task1 - rk=1
task2 - rk=2
task3 - rk=3
Does anyone think it has something to do with this ?
If it does, how can I generate different row keys ?
Thanks a lot,
John

Hi,
thanks for the testcase. I can reproduce the behavior. I found 2 minor issues in your code that I replied to you in a mail. I'll file a bug against the behavior. Should it turn out not to be a bug but a required coding change then I'll update this post
Frank

Similar Messages

How to join fields from different internal tables and display into one int

hai i have one doubt...
how to join fields from different internal tables and display into one internal table..
if anybody know the ans for this qus tell me......

hii
you can read data as per condition and then can join in one internal table using READ and APPEND statement..refer to following code.
SELECT bwkey                         " Valuation Area
         bukrs                         " Company Code
    FROM t001k
    INTO TABLE i_t001k
   WHERE bukrs IN s_bukrs.
IF sy-subrc EQ 0.
    SELECT bwkey                       " Valuation Area
           werks                       " Plant
      FROM t001w
      INTO TABLE i_t001w
       FOR ALL ENTRIES IN i_t001k
     WHERE bwkey = i_t001k-bwkey
       AND werks IN s_werks.
    IF sy-subrc EQ 0.
      LOOP AT i_output INTO wa_output.
        READ TABLE i_t001w INTO wa_t001w WITH KEY werks = wa_output-werks.
        READ TABLE i_t001k INTO wa_t001k WITH KEY bwkey = wa_t001w-bwkey.
        wa_output-bukrs = wa_t001k-bukrs.
        MODIFY i_output FROM wa_output.
        CLEAR wa_output.
      ENDLOOP.                         " LOOP AT i_output
    ENDIF.                             " IF sy-subrc EQ 0
regards
twinkal

Fetch data from different database tables

Hi...
How can i fetch data from different database tables and put it into a internal table and then display it??? Can provide simple short codes as i'm new to ABAP. Thanks.

Hi,
Check this sample code..
TYPE-POOLS: slis.
DATA: BEGIN OF itab OCCURS 0,
        vbeln TYPE vbeln,
        expand,
      END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
        vbeln TYPE vbeln,
        posnr TYPE posnr,
        matnr TYPE matnr,
        netpr TYPE netpr,
      END OF itab1.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'NETPR'.
s_fieldcatalog-do_sum    = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
DATA: s_layout TYPE slis_layout_alv.
s_layout-subtotals_text            = 'SUBTOTAL TEXT'.
s_layout-key_hotspot = 'X'.
s_layout-expand_fieldname = 'EXPAND'.
SELECT vbeln UP TO 100 ROWS
       FROM
       vbak
       INTO TABLE itab.
IF NOT itab[] IS INITIAL.
SELECT vbeln posnr matnr netpr
         FROM vbap
         INTO TABLE itab1
         FOR ALL ENTRIES IN itab
         WHERE vbeln = itab-vbeln.
ENDIF.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
s_keyinfo-header01 = 'VBELN'.
s_keyinfo-item01   = 'VBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
     EXPORTING
          i_callback_program = v_repid
          is_layout          = s_layout
          it_fieldcat        = t_fieldcatalog
          i_tabname_header   = 'ITAB'
          i_tabname_item     = 'ITAB1'
          is_keyinfo         = s_keyinfo
     TABLES
          t_outtab_header    = itab
          t_outtab_item      = itab1
     EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Naren

How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

How to delete the duplicate rows present in the parent table & insert the latest duplicate record into the parent table linked with the child table.

I have a master table and i need to import the rows into the parent and child table.
Master table name is Flatfile_Inventory
Parent Table name is INVENTORY
Child Tables name are INVENTORY_AMOUNT,INVENTORY_DETAILS,INVENTORY_VEHICLE,
Error details will be goes to LOG_INVENTORY_ERROR
I have 4 duplicate rows in the Flatfile_Inventory which i have already inserted in the Parent and child table.
Again when i run the query using stored procedure,
its tells that all the 4 rows are duplicate and will move to the Log_Inventory_Error.
I need is if i have the duplicate rows in the flatfile_Inventory when i start inserting into the parent and child table the already inserted row have the unique ID i
must identify it and delete that row in the both parent and chlid table.And latest row must get inserted into the Parent and child table from Flatfile_Inventory.
Please help me to write the query i have attached the Full stored procedure Script..
Arunraj Kumar

Hi Santhosh,
This is my Script.
-- =============================================
-- Stored Procedure for FLATFILE_INVENTORY
-- =============================================
-- Drop stored procedure if it already exists
DROP PROCEDURE SP_Flatfile_Inventory
GO
CREATE PROCEDURE SP_Flatfile_Inventory
AS
--USE IconicMarketing
GO
DECLARE
@FileType varchar(50) ,
@ACDealerID varchar(50) ,
@ClientDealerID varchar(50) ,
@DMSType varchar(50) ,
@StockNumber varchar(50) ,
@InventoryDate datetime ,
@StockType varchar(100) ,
@DMSStatus varchar(50) ,
@InvoicePrice numeric(18, 2) ,
@CostPack varchar(50) ,
@SalesCost numeric(18, 2) ,
@HoldbackAmount numeric(18, 2) ,
@ListPrice numeric(18, 2) ,
@MSRP varchar(max) ,
@LotLocation varchar(50) ,
@TagLine varchar(max) ,
@Certification varchar(max) ,
@CertificationNumber varchar(max) ,
@VehicleVIN varchar(50) ,
@VehicleYear bigint ,
@VehicleMake varchar(50) ,
@VehicleModel varchar(50) ,
@VehicleModelCode varchar(50) ,
@VehicleTrim varchar(50) ,
@VehicleSubTrimLevel varchar(max) ,
@Classification varchar(max) ,
@TypeCode varchar(100) ,
@VehicleMileage bigint ,
@EngineCylinderCount bigint ,
@TransmissionType varchar(50) ,
@VehicleExteriorColor varchar(50) ,
@VehicleInteriorColor varchar(50) ,
@CreatedDate datetime ,
@LastModifiedDate datetime ,
@ModifiedFlag varchar(max) ,
@InteriorColorCode varchar(50) ,
@ExteriorColorCode varchar(50) ,
@PackageCode varchar(50) ,
@CodedCost varchar(50) ,
@Air varchar(100) ,
@OrderType varchar(max) ,
@AgeDays bigint ,
@OutstandingRO varchar(50) ,
@DlrAccessoryRetail varchar(50) ,
@DlrAccessoryCost varchar(max) ,
@DlrAccessoryDesc varchar(max) ,
@ModelDesc varchar(50) ,
@Memo1 varchar(1000) ,
@Memo2 varchar(max) ,
@Weight varchar(max) ,
@FloorPlan numeric(18, 2) ,
@Purchaser varchar(max) ,
@PurchasedFrom varchar(max) ,
@InternetPrice varchar(50) ,
@InventoryAcctDollar numeric(18, 2) ,
@VehicleType varchar(50) ,
@DealerAccessoryCode varchar(50) ,
@AllInventoryAcctDollar numeric(18, 2) ,
@BestPrice varchar(50) ,
@InStock bigint ,
@AccountingMake varchar(50) ,
@GasDiesel varchar(max) ,
@BookValue varchar(10) ,
@FactoryAccessoryDescription varchar(max) ,
@TotalReturn varchar(10) ,
@TotalCost varchar(10) ,
@SS varchar(max) ,
@VehicleBody varchar(max) ,
@StandardEquipment varchar(max) ,
@Account varchar(max) ,
@CalculatedPrice varchar(10) ,
@OriginalCost varchar(10) ,
@AccessoryCore varchar(10) ,
@OtherDollar varchar(10) ,
@PrimaryBookValue varchar(10) ,
@AmountDue varchar(10) ,
@LicenseFee varchar(10) ,
@ICompany varchar(max) ,
@InvenAcct varchar(max) ,
@Field23 varchar(max) ,
@Field24 varchar(max) ,
@SalesCode varchar(max) ,
@BaseRetail varchar(10) ,
@BaseInvAmt varchar(10) ,
@CommPrice varchar(10) ,
@Price1 varchar(10) ,
@Price2 varchar(10) ,
@StickerPrice varchar(10) ,
@TotInvAmt varchar(10) ,
@OptRetail varchar(max) ,
@OptInvAmt varchar(10) ,
@OptCost varchar(10) ,
@Options varchar(max) ,
@Category varchar(max) ,
@Description varchar(max) ,
@Engine varchar(max) ,
@ModelType varchar(max) ,
@FTCode varchar(max) ,
@Wholesale varchar(max) ,
@Retail varchar(max) ,
@Draft varchar(max) ,
@Inventoryid int;
DECLARE Inventory_Cursor CURSOR FOR
SELECT * from [dbo].[FLATFILE_INVENTORY];
OPEN Inventory_Cursor
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ;
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT @VehicleVIN ;
-- ****************** insert into Inventory Table ***********
INSERT INTO INVENTORY
IconicDealerID,
StockNumber,
DMSType,
InventoryDate
VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate);
set @Inventoryid = scope_identity();
PRINT @Inventoryid;
--Insert into Inventory_Details Table
INSERT INTO [INVENTORY_DETAILS]
InventoryID,
StockType,
DMSStatus,
LotLocation,
TagLine,
Certification,
CertificationNumber,
CreatedDate,
LastModifiedDate,
ModifiedFlag,
PackageCode,
OrderType,
AgeDays,
OutstandingRO,
Memo1,
Memo2,
Purchaser,
PurchasedFrom,
DealerAccessoryCode,
InStock,
AccountingMake,
SS,
Account,
AccessoryCore,
ICompany,
InvenAcct,
Field23,
Field24,
SalesCode,
Draft,
FTCode
VALUES (
@InventoryID,
@StockType,
@DMSStatus,
@LotLocation,
@TagLine,
@Certification,
@CertificationNumber,
@CreatedDate,
@LastModifiedDate,
@ModifiedFlag,
@PackageCode,
@OrderType,
@AgeDays,
@OutstandingRO,
@Memo1,
@Memo2,
@Purchaser,
@PurchasedFrom,
@DealerAccessoryCode,
@InStock,
@AccountingMake,
@SS,
@Account,
@AccessoryCore,
@ICompany,
@InvenAcct,
@Field23,
@Field24,
@SalesCode,
@Draft,
@FTCode
--Insert into Inventory_Amount Table
INSERT INTO [dbo].[INVENTORY_AMOUNT]
InventoryID,
AllInventoryAcctDollar,
OtherDollar,
PrimaryBookValue,
AmountDue,
LicenseFee,
CalculatedPrice,
OriginalCost,
BookValue,
TotalReturn,
TotalCost,
DlrAccessoryRetail,
DlrAccessoryCost,
DlrAccessoryDesc,
InternetPrice,
InventoryAcctDollar,
BestPrice,
Weight,
FloorPlan,
CodedCost,
InvoicePrice,
CostPack,
SalesCost,
HoldbackAmount,
ListPrice,
MSRP,
BaseRetail,
BaseInvAmt,
CommPrice,
Price1,
Price2,
StickerPrice,
TotInvAmt,
OptRetail,
OptInvAmt,
OptCost,
Wholesale,
Retail
VALUES (
@InventoryID,
@AllInventoryAcctDollar,
@OtherDollar,
@PrimaryBookValue,
@AmountDue,
@LicenseFee,
@CalculatedPrice,
@OriginalCost,
@BookValue,
@TotalReturn,
@TotalCost,
@DlrAccessoryRetail,
@DlrAccessoryCost,
@DlrAccessoryDesc,
@InternetPrice,
@InventoryAcctDollar,
@BestPrice,
@Weight,
@FloorPlan,
@CodedCost,
@InvoicePrice,
@CostPack,
@SalesCost,
@HoldbackAmount,
@ListPrice,
@MSRP,
@BaseRetail,
@BaseInvAmt,
@CommPrice,
@Price1,
@Price2,
@StickerPrice,
@TotInvAmt,
@OptRetail,
@OptInvAmt,
@OptCost,
@Wholesale,
@Retail
--Insert into Inventory_Vehicle Table
INSERT INTO [dbo].[INVENTORY_VEHICLE]
InventoryID,
InteriorColorCode,
ExteriorColorCode,
Air,
ModelDesc,
VehicleType,
VehicleVIN,
VehicleYear,
VehicleMake,
VehicleModel,
VehicleModelCode,
VehicleTrim,
VehicleSubTrimLevel,
Classification,
TypeCode,
VehicleMileage
VALUES (
@InventoryID,
@InteriorColorCode,
@ExteriorColorCode,
@Air,
@ModelDesc,
@VehicleType,
@VehicleVIN,
@VehicleYear,
@VehicleMake,
@VehicleModel,
@VehicleModelCode,
@VehicleTrim,
@VehicleSubTrimLevel,
@Classification,
@TypeCode,
@VehicleMileage
-- Move cursor to Next record
FETCH NEXT FROM Inventory_Cursor
INTO @FileType ,
@ACDealerID ,
@ClientDealerID ,
@DMSType ,
@StockNumber ,
@InventoryDate ,
@StockType ,
@DMSStatus ,
@InvoicePrice ,
@CostPack ,
@SalesCost ,
@HoldbackAmount ,
@ListPrice ,
@MSRP ,
@LotLocation ,
@TagLine ,
@Certification ,
@CertificationNumber ,
@VehicleVIN ,
@VehicleYear ,
@VehicleMake ,
@VehicleModel ,
@VehicleModelCode ,
@VehicleTrim ,
@VehicleSubTrimLevel ,
@Classification ,
@TypeCode ,
@VehicleMileage ,
@EngineCylinderCount ,
@TransmissionType ,
@VehicleExteriorColor ,
@VehicleInteriorColor ,
@CreatedDate ,
@LastModifiedDate ,
@ModifiedFlag ,
@InteriorColorCode ,
@ExteriorColorCode ,
@PackageCode ,
@CodedCost ,
@Air ,
@OrderType ,
@AgeDays ,
@OutstandingRO ,
@DlrAccessoryRetail ,
@DlrAccessoryCost ,
@DlrAccessoryDesc ,
@ModelDesc ,
@Memo1 ,
@Memo2 ,
@Weight ,
@FloorPlan ,
@Purchaser ,
@PurchasedFrom ,
@InternetPrice ,
@InventoryAcctDollar ,
@VehicleType ,
@DealerAccessoryCode ,
@AllInventoryAcctDollar ,
@BestPrice ,
@InStock ,
@AccountingMake ,
@GasDiesel ,
@BookValue ,
@FactoryAccessoryDescription ,
@TotalReturn ,
@TotalCost ,
@SS ,
@VehicleBody ,
@StandardEquipment ,
@Account ,
@CalculatedPrice ,
@OriginalCost ,
@AccessoryCore ,
@OtherDollar ,
@PrimaryBookValue ,
@AmountDue ,
@LicenseFee ,
@ICompany ,
@InvenAcct ,
@Field23 ,
@Field24 ,
@SalesCode ,
@BaseRetail ,
@BaseInvAmt ,
@CommPrice ,
@Price1 ,
@Price2 ,
@StickerPrice ,
@TotInvAmt ,
@OptRetail ,
@OptInvAmt ,
@OptCost ,
@Options ,
@Category ,
@Description ,
@Engine ,
@ModelType ,
@FTCode ,
@Wholesale ,
@Retail ,
@Draft ;
END
CLOSE Inventory_Cursor;
DEALLOCATE Inventory_Cursor;
GO
SET ANSI_PADDING OFF
GO
Arunraj Kumar

Loading a flat table with duplicate rows in SQL server

Hi,
I'm trying to load a flat table with different levels that has duplicate rows. When I'm loading it from my source SQL server enviornment to target SQL server environment.. I can only load 63 rows out of the 1225 rows.. This is happenning because i had to define a primary key on the couple of columns..
When I just try to load it without a primary key, I get an error that PK needs to be defined for load to happen..
My table structure looks as follows -
Lvl1 Lvl2 Lvl3 Lvl4 AccountID AccountDesc
How do i load all rows of data in my target table using ODI?\
Please help

whirlpool wrote:
Hi,
I'm trying to load a flat table What is a flat table ? Are you talking about FACT table ?
When I'm loading it from my source SQL server enviornment to target SQL server environment.. I can only load 63 rows out of the 1225 rows.. This is happenning because i had to define a primary key on the couple of columns..
When I just try to load it without a primary key, I get an error that PK needs to be defined for load to happen..
Which IKM is in use ? I can not remember an IKM which needs a PK . Incremental Update IKM needs a Update key which can be a PK or UK at database level or ODI level.
My table structure looks as follows -
Lvl1 Lvl2 Lvl3 Lvl4 AccountID AccountDesc
How do i load all rows of data in my target table using ODI?\
If you not bother about PK at target then you can go for SQL Control Append to load your target table.
Thanks,
Sutirtha

Duplicate rows showing up in a table on the UI

Hi All,
We have a VO that returns 6 rows in a table on the UI. The rows become editable when a checkbox(a column in the table) is selected.
On running it, sometimes we are getting 12 rows on the UI such that the first 6 rows are shown again in the table in the same order.
When changes are made to this table and saved, only 6 rows are saved in the database table. Also, if 1 row is selected and the duplicate row of this row is not selected, then if we go to some other page and come back, the row that was selected earlier, will be unselected. If both the rows of same values are selected, only then the changes will be saved.
The VO query has 2 tables. Checked data in both of these tables and executed the query too, but did not find any data issue. Also, we are having an order by clause in the query and the data in the table is not showing up in order.
This is not occurring consistently but occurring for long durations.
Can anybody fix this?
Thanks,
Sakshi

Do you still have the "Music Video" Smart Playlist in iTunes? If you right click on a video file, which normally shows up under "Movies" you can pick the video type of Movie, Music Video, or TV Show. When you select "Music Video" the video file drops out of the Movies section and if the Music Video playlist is present will show up there.
You might have deleted that playlist so it wouldn't be on the iPod either.
So create a Smart Playlist where the rule is Video Kind IS Music Video...
Patrick

How to get selected row keys from RichSelectManyCheckbox

Adf Table has getSelectedRowKeys but SelectManyChekcbox does not has anything similar. Can you tell me how to get selected row keys programmatically for RichSelectManyCheckbox?

Hi User,
selectManyCheckbox component's value property holds the selected items values. Bind this property to some bean variable(of type list) so that you can get the selected values by accessing the bean property.
Sireesha

How to delete(remove) one row(record) from a dynamic table

Hi,
I have adynamically created table.
I want to delete 1 record(Row) from that Dynamic table.
Say if my dynamic table contains 5 records(rows);after deletion of 1 record(1 complete row)from that dynamic table,the number of records(rows) should be 4 .
Please suggest me how to proceed.
Please provide me some sample code.Its not working
I tried with these code:-Its not working-->
IPrivateExportexView.IEt_WriteoffNode node=wdContext.nodeEt_Writeoff();
IPrivateExportexView.IEt_WriteoffElement nodeEle= node.createEt_WriteoffElement(new Zfrm_Writeoff_P());
node.removeElement(nodeEle);
Please suggest
Thanks
-Sandip

Hi,
*int n=wdContext.nodeTable().getLeadSelection();*
*wdContext.nodeTable().removeElement(wdContext.nodeTable().getTableElementAt(n));*
Further more , an example is given below for better understanding , do modifications according to your need.
node :
       value node - Table (cardinality - 0..n , selection 0..1)
                          no    ( value attribute - string )
                          name (value attribute - string )
   // create node elements
     for(int i=0;i<5;i++)
    IPrivateClearnodeElements.ITableNode node = wdContext.nodeTable();
    IPrivateClearnodeElements.ITableElement ele = node.createTableElement();
    ele.setNo((101i)"");
    ele.setName("name :"(i1));
    node.addElement(ele);
// Apply template Table -- select -- table node or
// create a table UI element and set the property Datasource - Table ( of the context)
                         Insert Colum , in that column, next insert celleditor , of type text view , bind the property text -- to "name " of Table node of the context
           Insert Colum , in that column, next insert celleditor , of type text view , bind the property text -- to "no " of Table node of the context
// create a action "removeElement"
// create a button "Remove Element " --> Event action -- removeElement
// under the action write down the code :
public void onActionremoveElement(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionremoveElement(ServerEvent)
    // before removing display elements
    wdComponentAPI.getMessageManager().reportSuccess("Before deletion :");
     for(int i=0;i<wdContext.nodeTable().size();i++)
         wdComponentAPI.getMessageManager().reportSuccess(wdContext.nodeTable().getTableElementAt(i).getNo()) ;
     wdComponentAPI.getMessageManager().reportSuccess(wdContext.nodeTable().getTableElementAt(i).getName()) ;
    int n=wdContext.nodeTable().getLeadSelection();
    wdContext.nodeTable().removeElement(wdContext.nodeTable().getTableElementAt(n));
   // After deletion
    wdComponentAPI.getMessageManager().reportSuccess("After deletion :");
         for(int i=0;i<wdContext.nodeTable().size();i++)
               wdComponentAPI.getMessageManager().reportSuccess(wdContext.nodeTable().getTableElementAt(i).getNo()) ;
               wdComponentAPI.getMessageManager().reportSuccess(wdContext.nodeTable().getTableElementAt(i).getName()) ;
    //@@end
If helpful , give points .
Let me know if any problem u face .
Thanks,
Srini

Inserting static text in between rows returned from a pivot table

Is there a way to type static text (eg. “Note that the data for Land has an accuracy of 98%”) in between rows returned from the dataset in the rtf template. The alternative would be to break the BI analysis report (which is the source of the template data) into 2 parts and then insert each part into the template one below the other with the text typed in between.

Oracle support has confirmed that this requirement is not possible to implement

How to combine rows from different unrelated tables?

I need to create a report where the data are coming from 2 unrelated tables. My calculation needs data from both tables. Is this possible within Crystal Reports without having to write complicated SQL commands? If not, can someone provide an example of such a query?
thanks in advance
-Mark

Morning Mark,
Yes Amr is right however there has to be some sort of link between the two tables to create a join. For example a Order no from one table matches with other Order no.
There could be another possibility and that is if you have a third table which has two fields common to those two tables then when you bring the third table it will act as a middle man.
If you need to bring the information onto the report according to some sort of criteria then those two tables need to be linked togeather at some point otherwise it won't work.
For example
I have two tables, FOC and Customer, both have nothing in common however the third table Orders has fields which is common to FOC and Customer. So I linked the two tables via Orders table. Now when I open my report my results are based on the Customer and FOC number.
Hope this helps
Regards
Jehanzeb

How to get the Change Log Table name of the ODS from the system table

Hi,
I have a list of ODSs in the system and I am interested in finding the corresponding Change Log Table and the number of records in that table.
Can any one please tell me the name of the system table where this information is stored.
I dont want to get in this information manully (from the Contents tab of the ODS maintenane).
Regards,
Harikiran Gunnala

Hi
Go to SE16
Give the table name as "RSTSODS".
For User application field give CHANGELOG as input
and execute. You will get all the list of Changelog tables Along with below mentioned data
PSA
Version
To
Valid from
Object Status
Technical ODS name
Program Name
Maint Program
Object Name
Last changed by
UTC Time Stamp in Short Form
Partition number
Regards
Raj

Can OBIEE handle hierarchy built from different dimension tables?

Can I build an hierarchy with values at various levels appearing from other dimension tables in the model ?
Thanks

Hi,
if you want to drill in Answers from an attribute of a dimension to the attribute of anothr dimension, you can use the Preferred Drill Path inside the level of an hierachy.
For example:
Dime Time
-Year
--Month
---Day
Dim Geography
-Continent
--Nation
---City
If you set in the Month level of the Dim Time the Preferred Drill Path to Nation, in Answer when you drill from Month you see Nation.
I hope it helps.
Regards,
Gianluca

How to select data from AZure table storage without row key and partition key

Hi
I need to select a data from azure table storage without rowkey and partition key. how in azure storage emulator click query it display all data from that table.
thanks
rajesh

Hi rajesh,
It seems that you didn't click query data using storage emulator. But I recommend you could use the azure server explore in your VS to view your data and query data. Please see this document (http://msdn.microsoft.com/en-us/library/azure/ff683677.aspx).
And base on my experience, you may need input the command on Azure storage emulator, such as this page(http://msdn.microsoft.com/en-us/library/azure/gg433005.aspx).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the duplicate rows in dynamically generate data table [list items collection] and send emails in sharepoint2010

Hi,
i have share point list like below
ID   name AdminEmail Useremail   URl   DueDate   UploadSatus
1    ppp     [email protected] [email protected]    url some date    uploaded
2    yyy       [email protected]   [email protected]   url somedate    empty
3 xxx         [email protected]   [email protected]    url   somedate   empty
4 jjj           [email protected]    [email protected] url     somedate   emp
AdminEmail and UserEmail are lookup column
i using query the list using caml query
inside of foreach i am checking two condition like below
one is upload status in not empty
i need to send to mail to admin user this part i have done my adding all list items which have datatable apply group by working fine
in send condition i am checking difference between DueDate And current date value
if the value is =1 or -1
if the value is i
thank
i am getting the
table like below
ID   name AdminEmail Useremail   URl   DueDate   Upload
2    yyy       [email protected]   [email protected]   url   somedate    empty
3 xxx         [email protected]   [email protected]    url   somedate   empty
4 jjj           [email protected]    [email protected] url     somedate   empty
my issue is here how can i get the dynamic table rows which are same values of AdminEmail and user email one set and distintict rows are another set
sets which are same emails are same
3 xxx         [email protected]   [email protected]    url   somedate   empty
4 jjj           [email protected]    [email protected] url     somedate   empty
set 2
2    yyy       [email protected]   [email protected]   url   somedate    empty
how can i get this separate this can any one tell i need to send mail only one time to user [adim and user] .planing to aviod duplicate mail
Srinivas

your case better to use the two data tables to store the data
DataTable dt = list.Items.GetDataTable();
foreach (DataRow row in dt.Rows)

Rich Tree Table Drop duplicate Row Keys (from different Rich Tables)

Similar Messages

Maybe you are looking for