Right-clic​king titlebar halts Ethernet

I have an application that is receiving a stream of 19B messages over Ethernet at 12.8kHz. Within the 19B, I have a counter used to check integrity of the message ensuring I do not miss any messages. The stream works, and my application can process the information, but it is not robust. If any titlebar (from within my running application) is right-clicked, it causes the Ethernet traffic to stop for the duration of the click; ie. holding the right-button, the LEDs on my switch go solid instead of blinking. Because of the higher frequency, several messages are not received by my computer and the integrity counter is off, which sends a 'kill stream' message to the other device. There were occassional issues with moving the panels around, but I've turned off ATTR_MOVABLE and ATTR_CAN_MINIMIZE  with SetPanelAttribute() for the panel that initiates the stream, and I hide all other panels, thus the only interactions that can be done to panel is click a command button to send a 'kill stream' message, or X (close) the panel, which also sends a 'kill stream' message.
I was hoping there was a simple SetPanelAttribute() call to remove the right-click pop-up menu from the titlebar, but I didn't see anything. I wonder if it's even possible because it seems to be Windows functionality.
After some searching, I wonder if using SetPriorityClass from WinBase.h is what I want to deal with, but I am not familiar with Win32 API stuff nor know much about threads, etc. If there's an easier method, I would very much be open to it.
I appreciate any insight, and can provide more information if required.
The application has been developed using v10.0.0.
Solved!
Go to Solution.

Are you using a timer? Then see here. In this case changing the priority class will not help, you would need two different threads (async timer callbacks execute in their own thread)

Similar Messages

  • I have a macbook air and I can't cut and paste in itunes.  The right clic does not work. How can I work this out?

    I have a macbook air and I can't cut and paste in itunes.  The right clic does not work. How can I work this out?

    Great tip Stephen!!
    I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
    Thanks for the tip. This question should be tagged as answered.

  • Delete just three items from the right clic menu of a waveform graph

    I would like to delete some fonctionnalities from the right click menu
    of my waveform graph. If i use the specific function "delete menu", it
    works only if I want to delete all the right clic menu. But if I write
    the name of the specific item that i want to delete, this function
    returns an error.
    What's happening?

    I think you're trying to edit the default shortcut menu of an application item, which isn't allowed.  Another way to do this is to right click on the Graph->Advanced->Run-Time Shortcut menu->Edit
    Select Custom and then add in any items to want to be displayed.  This easily creates a customized menu.
    2006 Ultimate LabVIEW G-eek.

  • When i right clic in office word 2011 the application stop working ?

    When i right clic in office word 2011 the application stop working ?

    Post here:
    http://mac2.microsoft.com/help/office/14/en-us/word/

  • Right clic on pages, the application is lagging how can I fix it ?

    I,
    Everytime I do a right clic on pages (and some others application) the application is lagging
    How can I resolve the problem
    thank you

    Given the wealth of details you provided you want us to have a wild guess?
    What version of Pages?
    What version of OSX?
    Where are you clicking in Pages or in Finder?
    What are you right cllicking for?
    What Mac are you using?
    How much free space do you have on your hard drive?
    Are you starting up off or trying to access an external device?
    Peter

  • Transporta personalization (Ctrl + Right Clic) of client to other.

    Dear Experts.
    I did the customizing of hide fields, buttons in the portal using
    personalization (Ctrl + Right Clic). This work fine in the client portal where i made
    the customizing. My doubt is How can transport this change in the portal of QAS?
    I did Export  the package using System Administration ->Transport ->
    Transport Package->Export in the portal of dev and in the portal of QAS Import
    this package.
    However the changes are not reflected in the client portal  of QA.
    How can solve this issue?
    Thanks in advance,
    Regards

    Dear expert.
    I have checked the following documents, but my issue follow without work in the client for the portal  QAS .
    http://www.s a p technical.com/Tutorials/EP/TransportRequest/Index.htm
    http://www.s a p technical.com/Tutorials/EP/TransportRequest/Index.htm
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/f07bce66-989b-2a10-4883-cb585d977c09?prtmode=print&startindex=61 [original link is broken]
    [Best Practice u2013 Transporting SAP NetWeaver Portal Content|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/519d369b-0401-0010-0186-ff7a2b5d2bc0?quicklink=index&overridelayout=true]
    Thanks in advance,
    Regards

  • Deleting a row from a table control through right-clic​k menu

    I have a table control. I want to delete a row from it when a user right clicks on a particular row and selects "Delete row" menu item. I have managed the creation of menu item but have not been able to delete the row which is right clicked and the menu item "Delete row" is selected. Guidance required! Thanks!

    smercurio_fc wrote:
    It's irrelevant whether the table is a control or indicator. See attached VI.
    Hi smercurio,
    please see the attached picture. In my previous post i mean the different in the menu. The red marked function is not available, if the table is an indicator. LV8.5!
    Mike
    Message Edited by MikeS81 on 04-18-2008 05:19 PM
    Attachments:
    Unbenannt.PNG ‏22 KB

  • Right-clic to open in new window doesn't work (right clic open new tab works well)

    Hi, when right-clicking to a link, i can't open this link in a new window. I can see the context menu, i can open in new tab.

    hello lindal, this is very likely caused by an outdated addon. one of them is firebug, so in case you have it installed please update it to the latest version.

  • Left and Right-Clic​k Only Working Half The Time

    Ok, I have a Pavilion G6, A6Y36UA#ABA  The last few days, my mouse (trackpad and buttons on the laptop NOT an external one) works fine but I can't left-click on the desktop, start menu (or apparently Paint?). Everytime I try to left-click, the right-click menu pops up (except in Paint. It doesn't do anything in Paint except not work). I tried right clicking thinking it was backwards but that doens't work.
    I can left click as normal on the task bar, in Microsoft Word and in my Internet browser but I can't RIGHT click. (I can use the keyboard buton to bring up the right-click menu but it's still a pain) and for some reason, once I open more than one tab in Chrome, I can't go back to the earlier tabs unless I first close the tabs opened after it (also annoying).
    I've restarted the computer. Uninstalled the touch pad driver, restarted, reinstalled the device driver, restarted and I'm STILL having problems with it. Please help!

    I understand that your right-click and left-click buttons aren't quite working the way they should.
    What happens if you boot into a clean boot state?
    http://support.microsoft.com/kb/929135
    Also, what happens if you boot into safe mode with networking? This can be done by turning the system on and pressing F8 about once a second to get the options for safe mode.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • What is the mac equivalent to a right clic on a windows machine

    What is the Mac equivalent to a right click?  I installed Office for Mac 2011 on my macbook pro and I need to right click over a file from an ealier version of Office to make Office 2011 the default version of office.  This is all in preparation to install Lion (Lion won't support Office 2004 and I can't afford to lose access to these files).

    CTRL+click
    CTRL=control (in between the fn and alt/option keys).
    You can also go into System Preferences --> Trackpad and ensure "Secondary Click" is checked so that a two finger tap will act as a "right-click."

  • I want the Programmin​g pallet to appear whenever I right-clic​k while in the block diagram

    I want the Programming pallet to appear whenever I right-click while in the block diagram.  Right now I have to look at the Express dialog, arrow down and then click on Programming.  I want Programming to pop up first.  This has to be dirt simple but for some reason I'm not seeing the solution in Help.
    Solved!
    Go to Solution.

    go to tools...options...controls/functions palette...formatting
    Select "Icons only" and "category(standard)".
    Now right-click and pin the palette to get to the "customize" button. Select "Change visible palettes..." and click "select all".
    see if this is better. 
    LabVIEW Champion . Do more with less code and in less time .

  • How can i rename my folder bookmark ? without this option or action ( clic right,...)

    bookmark folder rename feature on Namoroka 3.6.3 ?
    Hi
    i just need to rename my bookmark folder and didn't find this feature on right clic ?
    Only paste, cute,.....
    Best regards
    jean

    Here is the easiest way. Right click the bookmark (on the taskbar) then click properties. In the small window that will pop-up, you will see the current name in blue highlight - so change it to whatever short name you want it to be - then save. All done!!

  • Can't connect using ethernet but can connect using Airport

    The problem I am currently facing is when I try to plug an ethernet cable into my MacBook Pro I can't get on the internet. At home I use an AEBS and connect fien, but when I go over to a friends house and they don't have wireless I try to hook up using the ethernet cable directly from the modem to connect and I can't.
    I open System Pref and it says on the left side under ethernet "Self Assigned IP" On the right hand side it says ethernet is connected and underneath that it says, "ethernet has self assigned IP address and may not be able to connect."
    I though this was a problem at his house and when I went home I tried it and I get the same thing. I used to have a Powerbook using Tiger and it did the same thing. Once I turn my Aiprort back on and plug the ethernet cable back into my AEBS I get on line.
    Am I doing something wrong? I figured if I just plug in an ethernet cable it should detect it and work.
    Thanks

    I am not sure if this is your problem, but I believe a lot of cable modems need to be power cycled if you switch the device that is connected to them. They only recognize the MAC address of the first device that connects to them after they have been power cycled.
    Although this was a couple of years ago, I was trying to investigate something (I can't remember what now) and I unplugged my router from my cable modem and plugged one of my computers directly to it. I found I couldn't do anything on the Internet. Later, when I was looking at the Comcast forums, I found the information about needing to power cycle the modem to get it to accept the "new" device.

  • Setup through ethernet? HELP!

    i have a HP LASERJET P2055DN; I have always had the printer setup to my desktop via USB cable, but the USB cable port has broken off the inside of the printer. I went to staples to figure out if theres any other way i could hook my computer and printer up without the USB and they suggested by ETHERNET cable.
    As of right now, I have the ethernet cable connected from my printer to my router. When i go into a word document to print, it shows the printer as either connect and "ready", but when i hit print, nothing happens. OR it shows up in my printer list as "offline", and then i right click on it and click on "use printer online". and still nothing happens.
    PLEASE HELP! all i want to do is be able to print!

    Hi @ashmcguinness1,
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet P2055dn Printer is a commercial product. You can do this at http://ow.ly/C9YPY.
    The support page for your product may be helpful in the meantime: http://ow.ly/C9YVC.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Customizing the right button popup menu?

    I was wondering if anyone knows of a way to customize the right click popup menu in/for Labview.
    I am build a vi with a graph on which you can right click, bring up a menu, select an item, and the graph will display a cursor at that location with the label you selected from the right click popup menu.
    I would be grateful for any insight you might have into this.

    Hi,
    I've a toolkit for this. It draws popupmenu's (at least on
    Windows95,98,NT,2000).
    The trigger can be anything (it's a boolean), so if you can catch the right
    mouse button (using the events structure), you can create a popup menu above
    it.
    Sorry, I can't mail it to you, because of the no.email... Drop me a mail,
    and I'll send it to you.
    Regards,
    Wiebe.
    "Tere" wrote in message
    news:[email protected]..
    > I was wondering if anyone knows of a way to customize the right click
    > popup menu in/for Labview.
    >
    > I am build a vi with a graph on which you can right click, bring up a
    > menu, select an item, and the graph will display a cursor at that
    > location with the label you selected from the right clic
    k popup menu.
    >
    > I would be grateful for any insight you might have into this.

Maybe you are looking for