Right hand side of trackpad depressed more than left hand side

of late i realised that the bottom right hand corner of my mbp r15 early 2013 is much more depressed than the left side in idle state. i have rarely used the button on the trackpad.
anybody else facing the same issue. do i need to worry about this??

Trackpad misbehavior can be caused by a swollen battery.
If your MBP has a user-removable battery, take it out and examine it for any signs of swelling, particularly on the top surface that is closest to the underside of the trackpad. It should be perfectly flat. If you find any swelling or curvature, the battery needs to be replaced before it damages your computer. It may be covered under your warranty, but that's a discretionary call by Apple, depending at least in part on the age and cycle count of the battery.
If your battery isn't user-removable, make a Genius Bar appointment, demonstrate the trackpad anomaly, and ask that your battery be removed, examined for swelling, and replaced if it has swollen. Ask firmly and politely whether Apple will pay for the replacement. The answer may be no, but it doesn't hurt to ask.

Similar Messages

  • How to proportionally scale one side of a photo more than the other?

    Does anyone have any suggestions as to how to scale one side of an image more than the other? I've tried Content-Aware scale but it always yields ugly results. Any help is greatly appreciated.
    Peter

    Hi Peter
    I thik the main problem is the amount of the side of the column showing is making the right column appear larger.
    I would therefore suggest moving part of the right side of the image slightly to the left.
    You need to be careful in distorting the image as it will show up in the perspective on the floor.

  • Can I use a magic trackpad with more than one Mac at a time?

    I am attempting to pair a MTP with a second MacBook Pro.  So far I can't get system preferences to find the MTP.
    I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
    The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac.  To do this, you first remove the existing pairing and then pair the trackpad again'.
    Can anyone advise, please?
    If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
    Thanks

    Yes, your keyboard, mouse or trackpad can be paired with multiple Macs.  You can even have multiple keyboards, mice or trackpads paired with one Mac.  The caveat is that the device can only be connected to one Mac at a time.  The device can't be paired or connected with a Mac while it's currently connected to another.
    Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other.  The device will connect with the first available paired Mac and then unavailable to the second.   If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on.   I do this with a keyboard from my iMac to a Mac Mini in another room.
    Captfred

  • When i open firefox i can only see the left side of the website but the left hand side of the website is on the right side of the screen

    it was working fine before and then 1 day i loaded firefox and now i can only see 1 side unless i i use full screen mode, please can any1 help me
    it looks like the left hand margin is way to big but i hav already looked at this and it is not the problem, and ive tried zooming in and out aswell and reseting the zoom ect

    Hi - I think this is related to the Babylon Toolbar
    Right Click on the toolbar in the grey area this is at top of the screen - If the Babylon Toolbar is ticked deselect it and all becomes well.
    Cityjet

  • On right click i cant to add more than 4 extensions

    I want to add one more extension like this here is [http://pic.mk/images/ewr3V.jpg SCREEN] one screen
    i enabled extension here you can see more
    [http://pic.mk/images/gEV9U.jpg SCreen!]
    ''moderator fixed the first hyperlink''

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • How do I get my 4th gen iPod to synch more than a handful of songs?

    I have a 4th gen iPod clickwheel (20GB). At one point I was able to synch most of my music library onto the device. Now every time I try to synch, it will take about a third of my songs and then the battery runs out and I get the message that the iPod cannot be synched. When I charge up the iPod again, I have a total of about 10 sings on it. What's causing this? How do I fix it?

    You could get a cable such as this one.
    http://www.cablestogo.com/product.asp?cat_id=1526&sku=35502
    It has the dock connector on one end fro connection to the iPod and then two connectors on the other end, one for connecting to the firewire charger you use and the other to connect to the usb port on your computer to sync the iPod. You can sync and charge at the same time.
    Alternatively, you could explore the possibility of installing a high speed card to your computer such as this one.
    http://www.coolcomputertoys.com/usbpcihost/
    I'm not saying that is the one you need (I know nothing at all about your particular computer), I'm just using this as an example of what I mean.

  • Regarding the thread running more than 24 hours

    The below is the query executed from oracle side and is running more than 24 hours and not yet over. And multiple threads are running.
    SELECT COUNT(*)
    FROM snurk_cmms_csht009_rfs,
    snurk_cmms_csht008_rfs,
    snurk_cmms_csht001_rfs
    WHERE snurk_cmms_csht001_rfs.cd_plant = snurk_cmms_csht008_rfs.cd_plant (+)
    AND snurk_cmms_csht001_rfs.no_rfs = snurk_cmms_csht008_rfs.no_rfs (+)
    AND snurk_cmms_csht008_rfs.cd_plant = snurk_cmms_csht009_rfs.cd_plant (+)
    AND snurk_cmms_csht008_rfs.no_rfs = snurk_cmms_csht009_rfs.no_rfs (+)
    AND snurk_cmms_csht008_rfs.ct_misc_item = snurk_cmms_csht009_rfs.ct_misc_item (+)
    AND (snurk_cmms_csht009_rfs.ct_misc_item_page = 1
    OR snurk_cmms_csht009_rfs.ct_misc_item_page IS NULL);
    snurk_cmms_csht009_rfs,snurk_cmms_csht008_rfs,snurk_cmms_csht001_rfs are synonyms for views that are pointing to DB2 tables with the help of dblink.
    The dba saying that the where clause in the above select is not sent to the db2 side so creating a cartesian product and asking us to add something in the where clause.
    Thread detail
    ENCLAVE DETAIL INFORMATION
    PLAN
    Thread: Plan=DISTSERV Connid=SERVER Corrid=G422001E Authid=CPPRXPS
    Dist : Type=DATABASE ACCESS, Luwid=H36A45B9.A712.C8ADB744CDC6=132705
    Location : 19.106.69.185
    enc
    ENCLAVE TOKEN: F0001B77B8 Enclave Type: Original Indep
    Owning System: SYB1 Owning Job: DB27DIST
    WLM Mode: Goal Enclave CPU Time 01:26:00.935
    THREAD DETAIL
    PLAN
    Thread: Plan=DISTSERV Connid=SERVER Corrid=G422001E Authid=CPPRXPS
    Dist : Type=DATABASE ACCESS, Luwid=H36A45B9.A712.C8ADB744CDC6=132705
    Location : 19.106.69.185
    act
    Thread Activity User Defined Functions
    DB2 Status = WAIT-REMREQ TCB Time (SQL) = 00:00:00.000
    MVS Status = Wait for TCB Time = 00:00:00.000
    Total Elapsed Time = 01-17:00 Elapsed Time = 00:00:00.000
    CP CPU Utilization = 00.7% Elapsed Time (SQL) = 00:00:00.000
    Total CP CPU Time = N/A SQL Events = 0
    IIP CPU Time = 00:00:00.000
    Total Parallel Tasks = 0
    Current Parallel Tasks= 0
    SQL CALL BEING EXECUTED
    PLAN
    Thread: Plan=DISTSERV Connid=SERVER Corrid=G422001E Authid=CPPRXPS
    Dist : Type=DATABASE ACCESS, Luwid=H36A45B9.A712.C8ADB744CDC6=132705
    Location : 19.106.69.185
    call
    SQL call is active, call information is as follows :
    Thread Status = WAIT-REMREQ SQL Request Type = DYNAMIC
    Total SQL Reqs = 3589969 SQL Call Type = FETCH
    SQL DBRM Name = GDRDA11 SQL Statement Number = 00000
    Collection ID = SDCSDRDA
    SELECT A1."CD_PLANT", A1."NO_RFS", A2."CD_PLANT", A2."NO_RFS", A2."CD_PL
    ANT", A2."NO_RFS", A2."CT_MISC_ITEM" FROM "MMDBDP7"."CSHT001_RFS" A1, "M
    MDBDP7"."CSHT008_RFS_MISC" A2
    Please suggest on what to be added in the where clause.
    thanks,
    Vinodh

    We cannot create a view in db2 side because of security reasons. I tried to run the query as below.
    SELECT count(a),count(b),count(c) FROM
    (Select cd_plant,no_rfs,ct_misc_item, ct_misc_item_page from snurk_cmms_csht009_rfs) a,
    (Select cd_plant,no_rfs,ct_misc_item from snurk_cmms_csht008_rfs) b,
    (Select cd_plant,no_rfs from snurk_cmms_csht001_rfs ) c
    Where c.cd_plant = b.cd_plant (+)
    AND c.no_rfs = b.no_rfs (+)
    AND b.cd_plant = a.cd_plant (+)
    AND b.no_rfs = a.no_rfs (+)
    AND b.ct_misc_item = a.ct_misc_item (+)
    AND (a.ct_misc_item_page = 1
    OR a.ct_misc_item_page IS NULL)
    I am getting the error as below:
    ERROR at line 4:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    Unable to retrieve text of NETWORK/NCR message 65535
    ORA-02063: preceding 2 lines from FAST_SNURK_CMMS
    How to troubleshoot this.
    thanks,
    Vinodh

  • Problems with failover  which is taking more than 5 min

    Hi,
    I'm new to Weblogic world and facing some problems in failover.
    I have plugin configuration as below.
    In the httpd.conf file
    # Configure Performance settings
    Timeout 45
    ListenBacklog 1000
    KeepAlive On
    MaxKeepAliveRequests 0
    KeepAliveTimeout 15
    <IfModule mpm_winnt.c>
    ThreadLimit 500
    ServerLimit 6
    StartServers 2
    MaxClients 3000
    MinSpareThreads 500
    MaxSpareThreads 3000
    ThreadsPerChild 500
    MaxRequestsPerChild 0
    </IfModule>
    # EnableMMAP off
    # EnableSendfile off
    # Configure DoS Settings
    # Max Body size in HTTP Request of 100Mb
    # Max HTTP headers set to 50
    # Max HTTP header size to 8Kb
    LimitRequestLine 8190
    LimitRequestFields 50
    LimitRequestFieldSize 8096
    LimitRequestBody 104857600
    RLimitCPU 300 300
    RLimitMem 8192000 8192000
    #RLimitNPROC 20 20
    # EnableMMAP off
    # EnableSendfile off
    this Configuration is in Weblogic plugin as we have seperate the configuration and included this in the httpd.conf
    <IfModule mod_weblogic.c>
    WebLogicCluster ********************************
    KeepAliveEnabled ON
    KeepAliveSecs 30
    CookieName PSJSESSION_ID
    DebugConfigInfo ON
    WLIOTimeoutSecs 4000
    # Debug ALL
    # WLLogFile /u01/PWCapache/logs/staging-orbit-emea.pwcinternal.com/wlproxy_http.log
    </IfModule>
    Asuming 01 & 02
    We stopped one side of the weblogic server(01) and tried the failovering, requests are going to the 02 side absolutely fine but still the plugin is sending the requests to the 01 side and its taking more than 5 min to route to available (02 which is up).
    My thoughts are to reduce the WLIOTimeoutSecs 4000 to 300 value... and introduce DynamicServerList value(at the moment this value is not set not sure how the apache behaves if this value is not set any suggestion on this pls?)
    as well as to introduce ConnectTimeoutSecs (10)& ConnectRetrySecs(2)
    Could somebody please point to the solution for this?
    Edited by: user2659864 on 14-Dec-2010 01:55

    Hi,
    If you are completely shutting down the server-01 then once the server-02 sends the response back to the proxy then it would have the fresh list of which servers are running properly, hence if still the proxy is sending the request to the server-01 then this mean that the Apache process have not shared the dynamic server list with the other process or it seems to be a bug in the WLS plugin.
    Suggestion try to use the latest WLS plugin and see if you can solve this issue as most of the time it would not be a an issue with WLS plugin.
    And if you are suspending the server-01 then the below link would give you a better idea on it as how things works.
    Topic: 404 error with Apache and Suspended Weblogic managed server
    http://middlewaremagic.com/weblogic/?p=4567
    Secondly by default the value of "WLIOTimeoutSecs " is 300 seconds so if you don't give this value then it would take 300 seconds which goes with "Idempotent" value which is by default "on", hence if the server is not able to send the response then it would fail over the second server after waiting 300 sec . Thus if you decrease the value of "WLIOTimeoutSecs " it would help you in case. More information can be seen below.
    Topic: General Parameters for Web Server Plug-Ins
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/plugins/plugin_params.html#wp1143055
    Hope that would answer all your questions :)
    Regards,
    Ravish Mody
    http://middlewaremagic.com/weblogic/
    Come, Join Us and Experience The Magic…

  • Will there be a left handed version of the Apple Watch?

    In the hopes of being accessible to all people, will Apple consider making a version where the crown will be on the left side of the watch for the left handed users?

    Although I love the design of the new Watch, I was really disappointing watching a 10min video with only right handed people using it. I hear that Apple explained that is a way to flip the screen though the "crown" will be at the bottom rather than the top. Rather poor solution in my opinion.
    Apple has the best designers and nobody has thought about left handed people, that  counts as 15% of the population. A specific and unique Watch for left handed would be the real revolution here.

  • Feature request: Add left-handed users support for Show Pointer

    Show Pointer is a very useful tool for precise movements and operations on the touch display.
    However, the way it currently works is optimized for right-handed people (as the button is on the left side and you maneuver with the right hand.
    As there are very many left-handed people among creative individuals, I'm kindly asking to add left-hand support to Show Pointer, which would effectively mirror the user interface of the tool (button on the right side).
    This could be configured in the Photoshop Touch setting panel.
    I would really appreciate someone from Adobe reading this and adding this to the product backlog. Thanks.

    If I'm ever asked to give input, I'll be sure to +1 for you. 

  • Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation appearing rightside height is more than the left side. In reverse manner from the left side.

    Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation bar appearing rightside height is more than the left side. In reverse manner from the left side. I dnt know whether it is default feature of iphone or not but i am really disappointed due to this. So please anyone help me in this issue and let me clear my doubt and make me happy. Thanks in advance.

    I believe what you are seeing is an optical illusion when viewing the screen from the side. Try to align one of the one of the options in Settings, like General, with the navigation bar you'll see it does the same thing.
    Hope that helps

  • Adding more than 1 JPanel on right side of JSplitPane then use setVisible?

    Hi im creating a option dialog in a program in where when they open it, it displays a JSplitPane with a list on the right side and the option screen on the left.
    When someone clicks on one ot the list items the required Panel is displayed on the right.
    I have Some Panels and if i do this.
    OptionsSplitPane.setRightComponent(First Panel);
    OptionsSplitPane.setRightComponent(Second Panel);
    FirstPanel.setVisible(true);
    SecondPanel.setVisible(false);
    it doesnt display either Panel on the right. I assume im overwriting the first panel when i set it again.
    How can i do what i want to do?
    Thanks

    Hi,
    a JSplitPane excepts only 1 component on either side - so, if you want to have more than one component on one side, you should place a JPanel with CardLayout there and place your components inside this panel and switch to the "card" you want to show - see CardLayout.
    Hope, this gives you an idea, how do do that
    greetings Marsian

  • Windows 7 - Unable to Print more than 15 PDF's by right clicking

    Hi guys,
    I've just upgraded quite a lot of PC's within the business I work for.
    The new PC's are Windows 7 OS based. When you right click more than 15 PDF's the option to print is not there.
    Is the a fix for this?
    Checked this on Windows XP and it works. Checked previous versions of Adobe Reader and these have the same print problem.
    Thanks
    Gareth

    Agree with previous - this is a new "feature" of W7 to accompany their considerably worsened search programming.  I keep XP platform on the side to perform both functions for some time now without any apparent instability.

  • I would like to know why ASC removed my comments and pleads saying they were rantings?  Maybe so, but if you received more than 100 emails a day, you would too! I have done all the right things to not receive these emails but to no avail.Can someone help?

    For months now I have been puting up with receiving emails generated from Apple Support Communities - sometimes more than 100 a day. Needless to say I am angry.  I have done everything I have been told to do so as not to receive them BUT they still keep on coming all day and all night.  It is messing up my sytem and taking too much time out of my busy day.  When I responded to another person's same problem, I immediately received an email from Apple Support Communities telling me that they have removed my responses from Apple Support Communities!  This, after only one day, when I have been writing and requesting help to have these emails stop from cloging up my email!  Of course I am upset and now even more.
    Please, if someone knows how to stop these emails from entering my box, I would really appreciate hearing.  In the meantime I continue to delete one by one.Linda166

    At the top of this page, click your name, where yours says "Welcome, linda166":
    Click the link "Manage email notifications":
    Click the checkbox at the upper right - to the right of where it says "Date" - this selects all of the messages on the page:
    Click the button "Remove selected notifications":
    Click "Next" and repeat for each page. You may have less than 213 pages.

  • I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

    I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you

    Hi Eva B.,
    Please refer to the help document below:
    Adobe Store | Online order and payment FAQ
    Regards,
    Sheena

Maybe you are looking for