Ringtone problems with iPhone 6 Plus after 8.1.1 update

After updating to 8.1.1 I noticed that my iPhone 6 Plus will not use any other ringtone no matter what is selected or assigned to a contact for phone calls. It always rings with the Apple "Opening" (Default) ringtone.

I Did the reset and it does not work. It will revert back to the original ringtone when I enter or leave a new wifi. Whenever I re purchase, I notice after it loads it will pop back up with the purchase price. Ugh!
But I've spoken with numerous people with the 6's and spoken with the Apple techs and it just looks like a bug that needs to be waited out. im sure with the next upgrade (which is hopefully sooner then later) the problem will be solved. So until then we get crappy ringtone options

Similar Messages

Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Facing network problem with iPhone 5s after updating it to iOS 7.1.2 .

Facing network problem with iPhone 5s after updating it to iOS 7.1.2 , using Vodafone in india. if at one place network is full then after few minutes at same place i get no network ? what can be done ?

Hi srikka,
I'm sorry to hear about the issues you've been having with the iOS 8 upgrade on your iPhone 5s; I know how frustrating that can be, especially on a device you use every day like a smartphone. If you continue to have issues with your WiFi and cellular data connections, you may find the troubleshooting steps outlined in the following articles helpful:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
iPhone cellular data connection issues - Apple Support
Regards,
- Brenden

Wifi not available problem in iphone 4s after 7.1.2 update.how can i fix it?

wifi not available problem in iphone 4s after 7.1.2 update.how can i fix it? please help me with this.

Hi harsh282828,
Welcome to the Apple Support Communities!
If you experiencing issues with Wi-Fi being grayed out or dim on your iPhone 4s I suggest the troubleshooting steps provided in the attached article.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
Have a great day,
Joe

IHome no longer works with iPhone 4s after iOS 6.1 update.

My iHome no longer works with iPhone 4s after iOS 6.1 update. Prompts message 'This accessory is not supported by iPhone'. Has anyone come accross this and is there a fix?

Ring up iHome and ask them for a fix... And if they cant supply you with a fix... Then you should be entitled to a replacement or a upgrade, as firmware upgrades on your ios device should not affect audio products......

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

Problems with iPhone 4s since the IOS 6 update

I've had nothing but problems with the IOS 6 update! The day after the update my camera started to slowly go out. I open my camera ap and the "lens cap" appears and then it sits for a few seconds and takes me back to my home screen. Annoying yes, but not the end of the world. But today I wanted to break my phone in half. I started to dial my brother's phone number and before I keyed the last two digits of his number my phone decided to call the number on it's own. I have yet get that off my screen. I can no longer make or receive any calls. When my phone is locked instead of my screen saver appearing my phone displays a screen that looks as though as my husband is trying to call me with his caller id photo- I swipe to "answer" it and it reverts back to the phone screen with keypad and the half dialed cell phone number of my brother! All calls are going straight to voicemail. When I leave the phone ap the green bar appears at the top of the screen and says "tap to return to call". If you tap to return to the call - there it is again-the half dialed number of my brother. I'm losing my mind and so frustrated. I put it into airplane mode hoping to "refresh" it and it still does it in airplane mode. I've never had to reset it and I'm not sure what option of resets to pick. Any advice is welcomed because I'm lost at this point.

Try to reset the phone. Hold both the home and power buttons at the same time. When the Apple logo appears on the screen, you can release the buttons and wait for the device to reboot. No data is lost during ths process.

Problem with contextual menus after 10.9.3 update

Hello, since the update to 10.9.3 i am experiencing problems with contextual menus. The problem is more frequent when I use an external screen.
First problem: I am losing the icons in the top bar of the finder. This happens mostly on external screens.
Second problem: The arrows indicating submenus upon a right click are lost. This problem is also present when I use the internal screen of my Macbook.
Sometimes, the icons in the left menu bar of the finder are also lost (mostly Dropbox):
Is there anything I can do? Is this a known problem?
My current system:
Macbook Pro Retina 13" (late 2013)
2.8 GHz Intel Core i7
8 Gb Ram
Intel Iris
Thanks!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Problem with Pages 09 after latest Snow Leopard Update

I upgraded Snow Leopard with the latest update this afternoon, and now I am having all sorts of problems with Pages. Most importantly, the Pages templates are all messed up, with formatting all screwed up and the typesetting a mess. Has anyone else experienced such problems with Pages after the update? I may have to revert back to pre-update Snow Leopard if this can't be resolved, since I use Pages for my work. Any assistance here would be appreciated!

You can install the combo over the delta (Software Update version). I did after I inadvertently used Software Update on my MacBook Pro. That's what I get for trying to update 3 Macs at one time.
Here is the link to the Mac OS 10.6.4 combo updater.

Problems with Wireless connection AFTER 10.4.2 update

I have read several topics on wireless problems AFTER the 10.4.2 update and wondering if anyone (or Apple) has found a fix to this problem. I cant get to my network or the internet via airport. I have tried zapping the pram, resetting the permissions, rebooting, checking for more update on a wired connection, reinstalling both 10.4.2 combo and 4.2 update and still nothing. This happened RIGHT after the reboot upon completion of the update. Im stuck and wondering if anyone has a solution or has any one SUCCESSFULLY contacted Apple and have they got a solution to fix the problem??

I'm having the same problems with accessing my airport base station (first generation snow at 4.0.9) after loading the airport admin 4.2 patch. I loaded the 4.2 patch on my g5 and G4 running 10.3.9. The response/across of the wifi connection is very poor. I can't use chicken of the VNC to manage the G4 from the G5 anymore at all due to the slow response and accessing the internet via either the G4 or the G5 is like a dial up connection. The broadband speed test results are 192mb to 274mb up and similar down.
I have a 12"powerbook (DVI 1gig version) with 10.3.9 that I have not loaded the 4.2 patch on and I am not having any issues with wifi access to the base station or the internet. broadband logs in right at 2.8mb via DSL. I also have a Dell laptop that I access the internet through the airport base station and I have no issues with speed and the same 2.8mb broadband speed test results.
Conclusion something in the airport 4.2 patch has changed the airport cards ability to see the base station.
With all that said, my question is - How do I back out of the 4.2 airport admin patch provided by apple or how do I resolve the slow response times between the airport cards in the G4 and G5 and the base station?
Any help?

Problems with re-boot after new OS X update

I installed the OS X update this past weekend on my MacBook Pro. Since then, my computer freezes and has benn running uncharacteristically slow. Re-boot takes nearly 30 minutes and the computer gets really warm. I've had this computer for 2.5 years and have never had a problem with it until now. I'm in grad school and this computer is my lifeline at the moment. I've tried running disk verify but it hasn't really worked. Please help!

I have the same problem - I'm afriad it seems to be yet another Apple "issue" which they pretend doesn't happen. There's a thread here on it - Re: USB keyboard doesn't work on Thunderbolt display .
I haven't tried their solution, though I would be surprised if it worked!

Problem with iPhone Headset after plugging and unplugging from PC

Hello
First I would like to introduce myself, My name is Lukasz and I can very happy customer company Apple.
but...
I have one problem, which is really annoying , I hope that someone will be able to help me...here we
A 3 months ago I bought a Apple Headset for my iPhone 4s. After realising iPhone 5 there also been realeased new iPhone headset.http://static5.businessinsider.com/image/50451874eab8eab73c000005-960/iphone-5-h eadphones-rumor.jpg
http://static5.businessinsider.com/image/50451874eab8eab73c000005-960/iphone-5-h eadphones-rumor.jpgHere is a link but you probably all know what I mean.
To last couple days I was saying that Apple is the best, its Quality, Its something amazing, most amazing accessories I ever had.
But I plug this headset into the normal PC in a college library...quest what happen after that?
buttons for volume stop working I can only use the headset to listen to music now but I cant change any volume or double click to change the song.
Since I plugged in and unplugged it into PC they just do not work. (it was a first time when I plugged them into PC since I bought them).
I heard from a few people that they have the same, but you now, its not supposed to happen like that.
Such a simply stuff and "all that amaziness and greatness" its not the same now
Does anyone have solution for that?
I cant afford to speend another £30 for headset because I plugged them into PC and they do not work any more...
Please Help,
Regardless
Lukasz

@aion321
Welcome to the forum!
AFAIK you would need adapter similar to this one:http://www.currys.co.uk/gbuk/kit-5300auadp-3-5mm-audio-adapter-for-nokia-mobile-phones-07960271-pdt....
Happy to have helped forum with a Support Ratio = 42.5

Reception problems with iPhone 3GS after upgrading to iOS 4.2.1

AFter upgrading to 4.2.1, my 3GS iPhone is experiencing bad signal, bad quality and frequent disconnections.
This was repeated even after my provider replaced my device to a different 3GS device, running 4.2.1.
inserting my SIM card to a NOKIA phone, showed strong signal and good reception.
Did anyone experience reception problems on 3GS running 4.2.1??
Thanks,

I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

Charge have problem with iphone 5 after upgrade to IOS7

Dear everyone,
I just upgrade to IOS 7 for my iphone 5,unfortunately is when i charge it ,a message displayed is accessory is suitable and % battery not up but down.I try a way as switch off is battery up again.
How to solve this problem.
Thanks a lot
Son

Hi
I cannot find it again, but I found a possible answer in another forum.
It is correect. Ios 7 has an option for auto app update.
The information is left on the screen to advise you which apps have been updated. Apparently they will clear after a week, only time will tell.
If I find the link I will repost.
One thing I noticed was that if you delete the app the update notice goes, only to return when you reinstall.......weird.
Cheers
Andy.

Problem with iPhone 5 after latest update

After updating to iOS 6.1.3, I find that my iPhone 5 speaker not functioning. No sound in music or video or any application needs the speaker. If someone faced this issue and solved it, please tell me what to do in this situation. Many Thanks in advance.

If he has actually Activan Locked it then only he can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before returning it) - please see http://support.apple.com/kb/ts4515
If you are unable to get him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.

Ringtone problems with iPhone 6 Plus after 8.1.1 update

Similar Messages

Maybe you are looking for