RMAN-00600: internal error, arguments [8201]

Hi,
on 10g R2 on a win 2003 server we had follwing error for RMAN backup :
RMAN-00600: internal error, arguments [8201] [] [] [] []we looked at metalink note : 412786.1
that says :
There is mismatch between the information stored in the Controlfile and rman Catalogand did RMAN> resync catalog; that did not resolve the problem.
We created another RMAN schema which means a new catalog. Then it is difficult to believe
that the new catalog was not syncronized with control file. But again exactly the same error :
RMAN-00600: internal error, arguments [8201] [] [] [] []
Why again the same error with a new catalog ?
Thanks.

Thank you Werner. I read the discussion. How about this work arround in Bug No. 5916459 :
Workaround ========== . Modify ?/admin/recover.bsq as follows and upgrade recovery catalog schema .
using UPGRADE CATALOG command.
FROM
SELECT nvl(oldest_flashback_time, MAXDATEVAL) INTO fbUntiltime FROM fb
WHERE dbinc_key = this_dbinc_key; .
TO .
SELECT nvl(oldest_flashback_time, MAXDATEVAL) INTO fbUntiltime FROM fb
WHERE dbinc_key = this_dbinc_key AND db_unique_name = this_db_unique_name; . I need some details to apply it.

Similar Messages

RMAN-00600: internal error

Hi every-one!
Now I have Oracle RAC 10.2.0.4 on AIX p595.
Normally, about 2 years, I backup by RMAN;
BACKUP DATABASE;
but from Yesterday, when using BACKUP DATABASE, it causes error as bellow:
RMAN> backup database;
Starting backup at 2011-04-11 10:02:59
using target database control file instead of recovery catalog
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: sid=9782 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_1: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_2
channel ORA_SBT_TAPE_2: sid=10436 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_2: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_3
channel ORA_SBT_TAPE_3: sid=9502 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_3: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_4
channel ORA_SBT_TAPE_4: sid=9489 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_4: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_5
channel ORA_SBT_TAPE_5: sid=9912 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_5: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_6
channel ORA_SBT_TAPE_6: sid=9396 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_6: Data Protection for Oracle: version 5.4.1.0
allocated channel: ORA_SBT_TAPE_7
channel ORA_SBT_TAPE_7: sid=9120 instance=oltpdb2 devtype=SBT_TAPE
channel ORA_SBT_TAPE_7: Data Protection for Oracle: version 5.4.1.0
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 04/11/2011 10:03:29
RMAN-00600: internal error, arguments [13205] [] [] [] []
RMAN>
But when I try to backup
BACKUP TABLESPACE USERS;
Iit is OK.
Pls help me!

Hi,
Probably you have hit Bug 6325947.
You could try to limit your files per set or your piece size.
Regards,
Tycho

RMAN backup restore leads to the error "ORA-00600: internal error code, arguments: [kccsbck_first], [2], [2349545192]" on DB startup

Hi All,
DB:11.2.0.3.0
OS: Sun Solaris SPARC 64 bits
I am facing an issue - RMAN backup restore leads to the error "ORA-00600: internal error code, arguments: , , " on DB startup. Restored from RMAN backup DB test2 to DB test1.
 $ sqlplus / as sysdba
 SQL*Plus: Release 11.2.0.3.0 Production on Sun Oct 6 09:31:28 2013
 Copyright (c) 1982, 2011, Oracle. All rights reserved.
 Connected to an idle instance.

SQL> startup
ORACLE instance started.
Total System Global Area 4277059584 bytes
Fixed Size 2166160 bytes
Variable Size 1493176944 bytes
Database Buffers 2768240640 bytes
Redo Buffers 13475840 bytes
ORA-00600: internal error code, arguments: , , ,
SQL> exit
DB test2 database validated:
RMAN> validate Database;
No issues reported.
Could anyone please let me the what's the cause of this error
Thanks for your time
Regards,
user10088255

HI,
CASE : I
C:\>set ORACLE_SID=xxxx
C:\>sqlplus sys/XXXXX@rosen as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:28:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
ORA-00600: internal error code, arguments: [kccsbck_first], [1], [3978145973],
Solution: AFTER GETTING ORA-00600, SHUT THE DATABASE AND STARTUP IT INTO MOUNT STAGE AND THEN ALTER DATABASE TO OPEN STAGE .
SQL> shut immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
Database mounted.
SQL> alter database open;
Database altered.
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ROSEN READ WRITE
CASE :: II
C:\>sqlplus sys/XXXX@royalton as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:37:37 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 1979714112 bytes
Database Buffers 1426063360 bytes
Redo Buffers 16007168 bytes
ORA-00600: internal error code, arguments: [kccsbck_first], [1], [73515151],[], [], [], [], [], [], [], [], []
Solution : As in above case, I have started the database in mount and then alter it to the open mode but it doesnot work out. After some analysis ,troubleshooting and googling, we have decided to flush the shared pool component of the SGA . So, we have started the database in mount stage and then flush the shared pool and further alter it to open stage . Below are the steps performed to solve this issue .
SQL> shut immediate
ORA-01507: database not mounted
ORACLE instance shut down.
C:\>set ORACLE_SID= royalton
C:\>sqlplus sys/xxxxxxxx@royalton as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:28:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
Database mounted.
SQL> alter system flush shared_pool;
SQL> alter database open
Database altered.
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ROYALTON READ WRITE
Conclusion : Though this is not the solution but a workaround to solve ORA-00600 which is having same argument as above, then you may follow the above steps.
Please chek this link : One Can Succeed at Almost Anything For Which He Has Enthusiasm...: ORA-00600: internal error code, arguments: [kccsbck_f…

ORA-00600: internal error code, arguments: [unable to load XDB library]

hi everybody ;
i have 9.2.0.7 db runs on SLES9 on host A. and i take full rman database backup to make a new database on different host ( host B ) with different file structure. ( sid is the same ) i had already 1 database on host B. after this duplicate now there are 2 database on host B.
i take daily full database rman backup on the new host for my new database and there is no problem. when i try to take extra full export backup i get an error ;
Dynamic link error: libxdb.so: cannot open shared object file: No such file or directory
*** 2010-08-05 09:46:12.868
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
as i search ; i have to stop the database and listener and set the LD_LIBRARY_PATH variable. how can i make this without make any mistake for the first database runs on Host B.
because 2 database must be up and running on host B. can you explaın these operation step by step ?
thank you ....

craft wrote:
any idea ?
>any idea ?
your database is out off support you should consider to upgrade. ORA-00600 indicate for bug

ORA-00600: internal error code, arguments: [6122], [0], [4], [0], [], [], [

Hi All,
I Got ORA-00600: internal error code, arguments: [6122], [0], [4], [0], [], [], [], [], [], [], [], []
today i check for Oracle knowledge but i can see only until 9i version.
I am pasting my OS AND database version below
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
I didn't find any knowledge for my database base version please any one help me on this
Thanks in Advance
Kind Regards
Venkat

980323 wrote:
Hi Vishal,
No not yet i will paste my trace file please can you have a look on it
Dump continued from file: /oracle/admin/diag/rdbms/ewahed13/EWAHED13/trace/EWAHED13_ora_14503.trc
ORA-00600: internal error code, arguments: [6122], [0], [4], [0], [], [], [], [], [], [], [], []
========= Dump for incident 22995 (ORA 600 [6122]) ========
*** 2013-05-16 12:36:32.933
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=6zcs0sc3nhj85) -----
UPDATE "CS_ACTUALS"."APPLICATIONSTATE" SET "DEFINITION"=:1,"DEFINITIONDT"=:2 WHERE "DEFINITIONDT"=:3 AND "ROWID"=:4 RETURNING ROWID into :5Depending upon the platform version see bugs:
Bug 12926930
Bug 15907953
Bug 16374276
I thinks its the Index block corrupt - So you have following options
1) Apply the patch - which is possible by seeing the exact bud
2) Try to recover the block
3) Try to drop and recreate the index - If its a non sys object.
You need to check and populate V$DATABASE_BLOCK_CORRUPTION for blocks which are marked corrupt.
Use dbv,rman validate commands to populate V$DATABASE_BLOCK_CORRUPTION view
Use - Identify the corruption extension using RMAN/DBV/ANALYZE etc [ID 836658.1] note for identifying the blocks that are corrupt.

ORA-00600: internal error code, arguments: [2252], [9005], [757013801], []

Hai,
database version:9.2.0.5
Os:windows 2003
My database is running smoothly until 4:20pm from 4:20 to 4:25 rman backup take place Even this also went fine.
Al suddenly when i check the SCN no on the archive logs It is gone from
51647306------>8848119266325
And when i see in the alter log file i have an error
ORA-00600: internal error code, arguments: [2252], [9005], [757013801], [], [], [], [], []
when i check the trace file in the USERDUMP i have lot of call trace and lot of sql statements. Even i can't find in the metalink.
Can any help me
regards

But check note Note:1017636.102 and Note:253977.1

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Err#-600 msg ORA-00600: internal error code, arguments: [4000], [7089]

Hi All,
I am getting the error "Err#-600 msg ORA-00600: internal error code, arguments: [4000], [7089]" while running a package. Could not able to get detailed info on this. Please someone help in resolving the above error.
Thanks,
Karthi

http://orafaq.com/wiki/ORA-00600
You can follow Nikolay's advice or try to find a workaround yourself by rewriting your query using a somehow different approach
Regards
Etbin

ORA-00600: internal error code, arguments: [25012], [19], [21], [], [], [],

when i execute dbcheck in db13, i receive this message:
ORA-00600: internal error code, arguments: [25012], [19], [21], [], [], [], [], []
i have Oracle 9.2.0 and i don't find any note in the OSS notes.

This may point you in the right direction?
Look at Note 758563 - Oracle Metalink access for SAP customers.
Oracle Metalink WebSite is:
https://metalink.oracle.com/metalink/plsql/f?p=200:101:5428529246127535152
Metalink Username and Password deleted by Moderator.
Please do not post this kind of information in the forum.
Thanks.
Then do a search on ORA-00600: internal error code, arguments: [25012]
This should get you started.
Message was edited by: Christian Graf

ORA-00600: internal error code, arguments: [kcrfr_update_nab_2], [0xB1B59D

Can anyone please try check out this ORA-600 error, ORA-00600: internal error code, arguments: [kcrfr_update_nab_2], [0xB1B59DA4],
[2], [], [], [], [], [].
My db went down abruptly due to power source ....now the database mounts successfully but when u try opening the db i.e. alter database open; it comes up with the error. Plz kindly treat urgently.Thanks

For all kind of internal errors, you should open SR (Service Request) in metalink. You need to contact Oracle Support
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

ORA-00600: internal error code, arguments: [kksscl-inf-inl-loop], [2500]

Hi people,
Do you have any idea about this error: ORA-00600: internal error code, arguments: [kksscl-inf-inl-loop], [2500], [6], [40], [85], [85], [], [].
Thanks in advance.
Marcos Freitas

Duplicate Thread:
ORA-00600: internal error code, arguments: [kksscl-inf-inl-loop], [2500]
C.

ORA-00600: internal error code, arguments: [12333], [0], [0], [3], [], [],

Could you tell me to to handle the following error?
ORA-00600: internal error code, arguments: [12333], [0], [0], [3], [], [], [], []
Thanks a lot

Could you please give me more detail information?
Thanks

ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], [],.....

Hi,
While connecting with database, I got the following error,
ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], [], [], [], [], []
I am using oracle 9i. Can anyone tell me the solution of that error ?
Thanks and Regards,
Hiren

many people are here because they lack that optionIt's not false, indeed, but if nobody had the same error, there is no chance to solve it.
At least a complete system/operation description is necessary to indicates some valid ways to investigate.
Nicolas.

ORA-00600: internal error code, arguments: [ktbdchk1: bad dscn], [], [], []

Hi,
Can anyone tell me how to resolve this error
ORA-00600: internal error code, arguments: [ktbdchk1: bad dscn], [], [], [], [], [], [], []
ORA-06512: at "ProcName", line 7
ORA-06512: at line 17
thx

Most of this type of errors (ORA-600) you need report to Oracle Support or check the metalink for released fix or possible workaround.
Anyway this error is fixed in:
10.1.0.4 patchset
9.2.0.7 patchset (released for Windows only, for other platforms expecting soon)
10gR2 (not released yet)

ORA-00600: internal error code, arguments: [kglpin-bad-lock], [0x70000062E067FC8], [], [], [], [], [], [], [], [], [], []

Hi,
Using owb 11.2.0.3 and encountering
ORA-00600: internal error code, arguments: [kglpin-bad-lock], [0x70000062E067FC8], [], [], [], [], [], [], [], [], [], []
this error when a proces sflow runs a mapping.
It fails and data remains unchanged.
When proces sflow next runs it succeeds.
Any ideas?
Thanks

Don't multipost, please. Stay in your original thread ORA-00600: internal error code, arguments: [kglpin-bad-lock], [0x70000062E067FC8], [], [], [], [], [], [], [], [], [], […
Mod: locking.

RMAN-00600: internal error, arguments [8201]

Similar Messages

Maybe you are looking for