RMAN-06023

Hi,
Oracle 10.2.0.5
Solaris 10
plan is backup and restore testing
while restoring amfacing below problem, can please suggest how to proceed further.
RMAN> restore datafile 28;
Starting restore at 21 APR 2013 20:40:28
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 04/21/2013 20:40:28
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN>
appricate your help.
thanks.

RMAN> list copy of datafile 28;it is showing specification does not match any backup in the repository
RMAN> list backup;List of Datafiles in backup set 32
File LV Type Ckp SCN Ckp Time Name
28 Full 563444 20 APR 2013 20:04:10
result is too long ........
select file#, status, enabled,
to_char(creation_time,'dd-Mon-yyyy hh24:mi:ss') creation_tm
,foreign_dbid, plugged_readonly,
to_char(foreign_creation_time,'dd-Mon-yyyy hh24:mi:ss') foreign_cr_tm,
plugin_change#
from v$datafile
where file# = 28;FILE# STATUS ENABLED CREATION_TM FOREIGN_DBID PLU FOREIGN_CR_TM PLUGIN_CHANGE#
28 ONLINE READ ONLY 20-Apr-2013 08:55:04 552936878 YES 20-Apr-2013 08:55:04 568809

Similar Messages

RMAN-06023: no backup or copy of datafile 5 found to restore ??

Hi,
Am on
Apps 12.0.4
DB 10gR2
Am trying to recover a datafile: got below error ?
Hex dump of (file 5, block 11701) in trace file /u01/app/oracle/admin/ora10g/udump/ora10g_ora_6482.trc
Corrupt block relative dba: 0x01402db5 (file 5, block 11701)
Bad check value found during backing up datafile
Data in bad block:
type: 0 format: 2 rdba: 0x01402db5
last change scn: 0×0000.00000000 seq: 0×1 flg: 0×05
spare1: 0×0 spare2: 0×0 spare3: 0×0
consistency value in tail: 0×00000001
check value in block header: 0x8bf5
computed block checksum: 0×2
Reread of blocknum=11701, file=/u01/app/oracle/oradata/ora10g/example01.dbf. found same corrupt data
RMAN> blockrecover datafile 5 block 11701;
Starting blockrecover at 23-AUG-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=139 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of blockrecover command at 10/23/2011 19:40:13
RMAN-06026: some targets not found – aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
i dont have a backup of this datafile
Thanks
Edited by: NewAppsDBA on Oct 24, 2011 6:23 AM

RMAN-03002: failure of blockrecover command at 10/23/2011 19:40:13
RMAN-06026: some targets not found – aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restoreSearch MOS for those errors and go through the docs.
Thanks,
Hussein

RMAN-06023: no backup or copy of datafile 3 found to restore

Hello,
i have searched the whole forum, but i didnt get anything.
i have rman backupset (x64), and i am trying to restore it to another machine, (same characteristic) but i got the error below.
help please.... :(
RMAN> run
2> {
3> ALLOCATE CHANNEL C1 DEVICE TYPE DISK;
4> RESTORE DATABASE;
5> }
using target database control file instead of recovery catalog
allocated channel: C1
channel C1: SID=170 device type=DISK
Starting restore at 03-MAY-10
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/03/2010 11:16:00
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>

Hello,
i am using 10 g and my backup set, is that enough?
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
79 Full 12.85G DISK 00:26:51 12-JUN-09
BP Key: 79 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_06
1209042215
Piece Name: F:\RMAN_BACKUP\2NKHDHB1_1_1
List of Datafiles in backup set 79
File LV Type Ckp SCN Ckp Time Name
1 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01.DBF
2 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01.DB
F
3 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01.DBF
4 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01.DBF
5 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01.DB
F
7 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIME
NSIONS_01.DBF
8 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACT
S_01_REORG0_REORG0.DBF
9 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDE
XES_01.DBF
10 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
ING_01_REORG0.DBF
11 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIME
NSIONS_01.DBF
12 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACT
S_01_REORG0_REORG0.DBF
13 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDE
XES_01.DBF
15 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAG
ING_01_REORG0.DBF
16 Full 4254271191 12-JUN-09 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
ING_02_REORG0.DBF
BS Key Type LV Size Device Type Elapsed Time Completion Time
80 Full 7.17M DISK 00:00:04 12-JUN-09
BP Key: 80 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_06
1209042215
Piece Name: F:\RMAN_BACKUP\2OKHDITH_1_1
SPFILE Included: Modification time: 12-JUN-09
Control File Included: Ckp SCN: 4254271191 Ckp time: 12-JUN-09
BS Key Type LV Size Device Type Elapsed Time Completion Time
81 Full 13.29G DISK 00:33:30 22-APR-10
BP Key: 81 Status: EXPIRED Compressed: NO Tag: BACKUP_BISE1DB_000_04
2210052403
Piece Name: F:\RMAN_BACKUP\2PLBPCV8_1_1
List of Datafiles in backup set 81
File LV Type Ckp SCN Ckp Time Name
1 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSTEM01.DBF
2 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\UNDOTBS01.DB
F
3 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\SYSAUX01.DBF
4 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\USERS01.DBF
5 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\EXAMPLE01.DB
F
7 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_DIME
NSIONS_01.DBF
8 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_FACT
S_01_REORG0_REORG0.DBF
9 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_INDE
XES_01.DBF
10 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
ING_01_REORG0.DBF
11 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_DIME
NSIONS_01.DBF
12 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_FACT
S_01_REORG0_REORG0.DBF
13 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_INDE
XES_01.DBF
15 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_TST_STAG
ING_01_REORG0.DBF
16 Full 5783997201 22-APR-10 D:\ORACLE\BISE1\ORADATA\BISE1DB\DWH_PRD_STAG
ING_02_REORG0.DBF
RMAN>

Problem about RMAN-06023: no backup or copy of datafile 5 found to restore

here is the error info when i duplicate database use rman
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/19/2011 09:33:39
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
and following my operate steps
==================
auxiliary instance configure
1, create password file
$ orapwd file=/opt/app/oracle/product/10.2.0/db_1/dbs/orapwslavedb password=Myss123456 entries=30
2,edit tnsname.ora on auxilary so i can connect primary db and auxiliary
$ vi tnsname.ora (tnsping test pass)
PRIDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.40.214)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = pridb)
3,create pfile for auxiliary instance
$ vi initslavedb.ora
*.DB_BLOCK_SIZE=8192
*.DB_NAME=slavedb
*.CONTROL_FILES='/opt/app/oracle/oradata/slavedb/control01.ctl','/opt/app/oracl
e/oradata/slavedb/control02.ctl','/opt/app/oracle/oradata/slavedb/control03.ctl'
*.DB_FILE_NAME_CONVERT='/opt/app/oracle/oradata/primaryd','/opt/app/oracle/oradata/slavedb'
*.LOG_FILE_NAME_CONVERT='/opt/app/oracle/oradata/primaryd','/opt/app/oracle/oradata/slavedb'
4,start auxiliary instance nomount and create spfile,then shutdown it,and startup to nomount status again
5,backup target database
RMAN> backup database;
6, create directory on slavedb,and transforer target backupset and archlog to salvedb
$ mkdir -p /opt/app/oracle/flash_recovery_area/PRIDB/backupset/2011_08_19
$ mkdir -p /opt/app/oracle/flash_recovery_area/PRIDB/archivelog/2011_08_19
7,run duplicate commandline on auxiliary
[oracle@localhost admin]$ rman target sys/Myss123456@pridb auxiliary /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Aug 19 10:46:05 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: PRIDB (DBID=969477968, not open)
connected to auxiliary database: SLAVEDB (not mounted)
RMAN> duplicate target database to 'slavedb'
2> nofilenamecheck;
Starting Duplicate Db at 19-AUG-2011 10:46:15
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=35 devtype=DISK
contents of Memory Script:
set until scn 490864;
set newname for datafile 1 to
"/opt/app/oracle/oradata/slavedb/system01.dbf";
set newname for datafile 2 to
"/opt/app/oracle/oradata/slavedb/undotbs01.dbf";
set newname for datafile 3 to
"/opt/app/oracle/oradata/slavedb/sysaux01.dbf";
set newname for datafile 4 to
"/opt/app/oracle/oradata/slavedb/users01.dbf";
set newname for datafile 5 to
"/opt/app/oracle/oradata/slavedb/example01.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 19-AUG-2011 10:46:16
using channel ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/19/2011 10:46:16
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
anyone can help?

use format command with backup.
eg:-
backup as compressed backupset database format '/u01/db/backup/%d_%I_%s_%T';
if it is archivelog mode then
backup as compressed backupset database format '/u01/db/backup/%d_%I_%s_%T' plus archivelog format '/u01/db/backup/%d_%I_%s_%T';
then copy the backup to the auxiliary instance server.
then try again the duplicate command.

How to put all RMAN-files in one backupset?? (so preventing RMAN-06023)

((Please see also this thread: Re: Restoring Database causes ORA-19612
How can I manage that ALL files, ALL pieces, Controlfile, SPfile etc. etc. is available in ONE backup-file.
When I do "Backup Database" and I copy the created files to another location: restoring the database keeps asking for older backuppieces.
(Rman-error: RMAN-06023: no backup or copy of datafile 1 found to restore"
When i type on the target:
RMAN> list backup of datafile 1;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
12 Full 70.03G DISK 00:44:49 02-APR-12
BP Key: 12 Status: EXPIRED Compressed: NO Tag: TAG20120402T213111
Piece Name: G:\RMANBACKUP\0KN7EQSV_1_1
List of Datafiles in backup set 12
File LV Type Ckp SCN Ckp Time Name
1 Full 2945781693 02-APR-12 D:\ORACLEDATA\CISORA1\SYSTEM01.DBF
RMAN>
I see that the Missing file is in a backupset of 1 day ago. That's NOT what i want. I want EVERY DAY a FULL backupset.
please advise how to achive.
thanks
Edited by: AvRossem on 3-apr-2012 5:36

AvRossem wrote:
((Please see also this thread: Re: Restoring Database causes ORA-19612
How can I manage that ALL files, ALL pieces, Controlfile, SPfile etc. etc. is available in ONE backup-file.
When I do "Backup Database" and I copy the created files to another location: restoring the database keeps asking for older backuppieces.
(Rman-error: RMAN-06023: no backup or copy of datafile 1 found to restore"
When i type on the target:
RMAN> list backup of datafile 1;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
12 Full 70.03G DISK 00:44:49 02-APR-12
BP Key: 12 Status: EXPIRED Compressed: NO Tag: TAG20120402T213111
Piece Name: G:\RMANBACKUP\0KN7EQSV_1_1
List of Datafiles in backup set 12
File LV Type Ckp SCN Ckp Time Name
1 Full 2945781693 02-APR-12 D:\ORACLEDATA\CISORA1\SYSTEM01.DBF
RMAN>
I see that the Missing file is in a backupset of 1 day ago. That's NOT what i want. I want EVERY DAY a FULL backupset.
please advise how to achive.
thanks
Hi,
How can I manage that ALL files, ALL pieces, Controlfile, SPfile etc. etc. is available in ONE backup-file.The short awnser is: You cannot do that.
RMAN divides some files types in different backupset.
This is a rule:
Datafiles use your own Backupset
Controlfile and SPFILE use your own Backupset
ARCHIVELOG use your own Backupset
For each BACKUPSET you can have many Backuppiece (i.e files on disk). As rule you always have relationship of one (Backupset) to one or more (Backuppiece).
So, respecting the rule above you can do following:
You can use the option FILESPERSET to keep all datafiles in same backuppiece. (In my case below 200 datafiles will be in same backuppiece)
{code}
RMAN> backup database tag='my_backup' filesperset 200 include current controlfile ;
Starting backup at 03-APR-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/u01/app/oracle/oradata/dbrcv/system01.dbf
input datafile file number=00002 name=/u01/app/oracle/oradata/dbrcv/sysaux01.dbf
input datafile file number=00003 name=/u01/app/oracle/oradata/dbrcv/undotbs01.dbf
input datafile file number=00004 name=/u01/app/oracle/oradata/dbrcv/users01.dbf
channel ORA_DISK_1: starting piece 1 at 03-APR-12
channel ORA_DISK_1: finished piece 1 at 03-APR-12
piece handle=/u01/app/oracle/fast_recovery_area/DBRCV/backupset/2012_04_03/o1_mf_nnndf_MY_BACKUP_7qppmnn7_.bkp tag=MY_BACKUP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
including current control file in backup set
including current SPFILE in backup set
channel ORA_DISK_1: starting piece 1 at 03-APR-12
channel ORA_DISK_1: finished piece 1 at 03-APR-12
piece handle=/u01/app/oracle/fast_recovery_area/DBRCV/backupset/2012_04_03/o1_mf_ncsnf_MY_BACKUP_7qppo4ls_.bkp tag=MY_BACKUP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 03-APR-12
RMAN> backup archivelog all filesperset 200 ;
Starting backup at 03-APR-12
current log archived
using channel ORA_DISK_1
channel ORA_DISK_1: starting archived log backup set
channel ORA_DISK_1: specifying archived log(s) in backup set
input archived log thread=1 sequence=16 RECID=1 STAMP=779332254
input archived log thread=1 sequence=17 RECID=2 STAMP=779374813
input archived log thread=1 sequence=18 RECID=3 STAMP=779393222
input archived log thread=1 sequence=19 RECID=4 STAMP=779436085
input archived log thread=1 sequence=20 RECID=5 STAMP=779472067
input archived log thread=1 sequence=21 RECID=6 STAMP=779511653
input archived log thread=1 sequence=22 RECID=7 STAMP=779580131
input archived log thread=1 sequence=23 RECID=8 STAMP=779648029
input archived log thread=1 sequence=24 RECID=9 STAMP=779649107
input archived log thread=1 sequence=25 RECID=10 STAMP=779649189
input archived log thread=1 sequence=26 RECID=11 STAMP=779649436
channel ORA_DISK_1: starting piece 1 at 03-APR-12
channel ORA_DISK_1: finished piece 1 at 03-APR-12
piece handle=/u01/app/oracle/fast_recovery_area/DBRCV/backupset/2012_04_03/o1_mf_annnn_TAG20120403T171718_7qppphtb_.bkp tag=TAG20120403T171718 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:35
Finished backup at 03-APR-12
{code}
Now I have 3 files:
{code}
RMAN > List BACKUSET;
BS Key Type LV Size Device Type Elapsed Time Completion Time
447 Full 314.02M DISK 00:00:37 03-APR-12
BP Key: 450 Status: AVAILABLE Compressed: NO Tag: MY_BACKUP
Piece Name: /u01/app/oracle/fast_recovery_area/DBRCV/backupset/2012_04_03/o1_mf_nnndf_MY_BACKUP_7qppmnn7_.bkp
List of Datafiles in backup set 447
File LV Type Ckp SCN Ckp Time Name
1 Full 444127 03-APR-12 /u01/app/oracle/oradata/dbrcv/system01.dbf
2 Full 444127 03-APR-12 /u01/app/oracle/oradata/dbrcv/sysaux01.dbf
3 Full 444127 03-APR-12 /u01/app/oracle/oradata/dbrcv/undotbs01.dbf
4 Full 444127 03-APR-12 /u01/app/oracle/oradata/dbrcv/users01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
448 Full 9.36M DISK 00:00:04 03-APR-12
BP Key: 451 Status: AVAILABLE Compressed: NO Tag: MY_BACKUP
Piece Name: /u01/app/oracle/fast_recovery_area/DBRCV/backupset/2012_04_03/o1_mf_ncsnf_MY_BACKUP_7qppo4ls_.bkp
SPFILE Included: Modification time: 03-APR-12
SPFILE db_unique_name: DBRCV
Control File Included: Ckp SCN: 444147 Ckp time: 03-APR-12
BS Key Size Device Type Elapsed Time Completion Time
492 300.38M DISK 00:00:26 03-APR-12
BP Key: 495 Status: AVAILABLE Compressed: NO Tag: TAG20120403T171718
Piece Name: /u01/app/oracle/fast_recovery_area/DBRCV/backupset/2012_04_03/o1_mf_annnn_TAG20120403T171718_7qppphtb_.bkp
List of Archived Logs in backup set 492
Thrd Seq Low SCN Low Time Next SCN Next Time
1 16 234488 30-MAR-12 261258 31-MAR-12
1 17 261258 31-MAR-12 286957 31-MAR-12
1 18 286957 31-MAR-12 303448 31-MAR-12
1 19 303448 31-MAR-12 329357 01-APR-12
1 20 329357 01-APR-12 351967 01-APR-12
1 21 351967 01-APR-12 375454 02-APR-12
1 22 375454 02-APR-12 409423 02-APR-12
1 23 409423 02-APR-12 443037 03-APR-12
1 24 443037 03-APR-12 443868 03-APR-12
1 25 443868 03-APR-12 443928 03-APR-12
1 26 443928 03-APR-12 444188 03-APR-12
{code}
See it:
BackupSet :
447 = Datafiles
448 = Controfile and SPFILE
492 = Archivelogs
Now I want create a copy of these backupset to offsite purpose:
{code}
RMAN> backup backupset 447,448,492 tag='my_backup_offsite' format '/u01/app/offsite/%U';
Starting backup at 03-APR-12
using channel ORA_DISK_1
channel ORA_DISK_1: input backup set: count=17, stamp=779649348, piece=1
channel ORA_DISK_1: starting piece 1 at 03-APR-12
channel ORA_DISK_1: backup piece /u01/app/offsite/0hn7h0a4_1_2
piece handle=/u01/app/offsite/0hn7h0a4_1_3 comment=NONE
channel ORA_DISK_1: finished piece 1 at 03-APR-12
channel ORA_DISK_1: backup piece complete, elapsed time: 00:00:25
channel ORA_DISK_1: input backup set: count=18, stamp=779649393, piece=1
channel ORA_DISK_1: starting piece 1 at 03-APR-12
channel ORA_DISK_1: backup piece /u01/app/offsite/0in7h0bh_1_2
piece handle=/u01/app/offsite/0in7h0bh_1_3 comment=NONE
channel ORA_DISK_1: finished piece 1 at 03-APR-12
channel ORA_DISK_1: backup piece complete, elapsed time: 00:00:03
channel ORA_DISK_1: input backup set: count=19, stamp=779649439, piece=1
channel ORA_DISK_1: starting piece 1 at 03-APR-12
channel ORA_DISK_1: backup piece /u01/app/offsite/0jn7h0cv_1_2
piece handle=/u01/app/offsite/0jn7h0cv_1_3 comment=NONE
channel ORA_DISK_1: finished piece 1 at 03-APR-12
channel ORA_DISK_1: backup piece complete, elapsed time: 00:00:45
Finished backup at 03-APR-12
RMAN> list backupset tag='my_backup_offsite';
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
447 Full 314.02M DISK 00:00:37 03-APR-12
BP Key: 624 Status: AVAILABLE Compressed: NO Tag: MY_BACKUP_OFFSITE
Piece Name: /u01/app/offsite/0hn7h0a4_1_3
List of Datafiles in backup set 447
File LV Type Ckp SCN Ckp Time Name
1 Full 444127 03-APR-12 /u01/app/oracle/oradata/dbrcv/system01.dbf
2 Full 444127 03-APR-12 /u01/app/oracle/oradata/dbrcv/sysaux01.dbf
3 Full 444127 03-APR-12 /u01/app/oracle/oradata/dbrcv/undotbs01.dbf
4 Full 444127 03-APR-12 /u01/app/oracle/oradata/dbrcv/users01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
448 Full 9.36M DISK 00:00:04 03-APR-12
BP Key: 625 Status: AVAILABLE Compressed: NO Tag: MY_BACKUP_OFFSITE
Piece Name: /u01/app/offsite/0in7h0bh_1_3
SPFILE Included: Modification time: 03-APR-12
SPFILE db_unique_name: DBRCV
Control File Included: Ckp SCN: 444147 Ckp time: 03-APR-12
BS Key Size Device Type Elapsed Time Completion Time
492 300.38M DISK 00:00:26 03-APR-12
BP Key: 626 Status: AVAILABLE Compressed: NO Tag: MY_BACKUP_OFFSITE
Piece Name: /u01/app/offsite/0jn7h0cv_1_3
List of Archived Logs in backup set 492
Thrd Seq Low SCN Low Time Next SCN Next Time
1 16 234488 30-MAR-12 261258 31-MAR-12
1 17 261258 31-MAR-12 286957 31-MAR-12
1 18 286957 31-MAR-12 303448 31-MAR-12
1 19 303448 31-MAR-12 329357 01-APR-12
1 20 329357 01-APR-12 351967 01-APR-12
1 21 351967 01-APR-12 375454 02-APR-12
1 22 375454 02-APR-12 409423 02-APR-12
1 23 409423 02-APR-12 443037 03-APR-12
1 24 443037 03-APR-12 443868 03-APR-12
1 25 443868 03-APR-12 443928 03-APR-12
1 26 443928 03-APR-12 444188 03-APR-12
RMAN>
{code}
When you perform restore you can use the tag='my_backup_offsite'.
This files belong a same policy of "configure retention policy ... " of RMAN. So, this files will be obsolete when it is out the policy.
Hope this helps,
Levi Pereira

Duplicate database command fails with RMAN-06023

Hello,
I am trying to test out the duplicate database command in RMAN and am running into some issues.
I did a backup of my test database, copied the backup files to a second server, and now I'm trying to run the duplicate command and I get RMAN-06023 errors for all of my datafiles.
I did crosschecks on my backupsets and they showed as available. They are in the same location on the new server, with the same permissions. There are no recent archived logs, as this is a very quiet environment.
My commands and output (edited slightly) were as follows:
RMAN> run {
2> allocate channel d1 device type disk;
3> allocate channel d2 device type disk;
4> backup database;
5> }
allocated channel: d1
channel d1: sid=32 devtype=DISK
allocated channel: d2
channel d2: sid=36 devtype=DISK
Starting backup at 03-JUL-07
channel d1: starting full datafile backupset
channel d1: specifying datafile(s) in backupset
channel d2: starting full datafile backupset
channel d2: specifying datafile(s) in backupset
input datafile fno=00012 name=/database/oradata/source/matrix_ts01.dbf
input datafile fno=00004 name=/database/oraindex/source/ind_ts01.dbf
input datafile fno=00006 name=/database/oradata/source/users_ts01.dbf
input datafile fno=00003 name=/database/oradata/source/drsys01.dbf
input datafile fno=00007 name=/database/oradata/source/ORACLEORADATATST2CWMLITE01.DBF
input datafile fno=00009 name=/database/oradata/source/ORACLEORADATATST2ODM01.DBF
input datafile fno=00005 name=/database/oradata/source/tools_ts01.dbf
channel d2: starting piece 1 at 03-JUL-07
including current SPFILE in backupset
including current controlfile in backupset
input datafile fno=00011 name=/database/oradata/source/ORACLEORADATADATA.DBF
input datafile fno=00001 name=/database/oradata/source/system_ts01.dbf
input datafile fno=00002 name=/database/oradata/source/undo_ts01.dbf
input datafile fno=00008 name=/database/oradata/source/ORACLEORADATATST2EXAMPLE01.DBF
input datafile fno=00010 name=/database/oradata/source/ORACLEORADATATST2XDB01.DBF
channel d1: starting piece 1 at 03-JUL-07
channel d2: finished piece 1 at 03-JUL-07
piece handle=/database/oracle/product/9.2.0/dbs/0ciltjgn_1_1 comment=NONE
channel d2: backup set complete, elapsed time: 00:08:17
channel d1: finished piece 1 at 03-JUL-07
piece handle=/database/oracle/product/9.2.0/dbs/0biltjgn_1_1 comment=NONE
channel d1: backup set complete, elapsed time: 00:09:22
Finished backup at 03-JUL-07
released channel: d1
released channel: d2
** at this point I copied the files listed above to same directory on destination server **
RMAN> connect auxiliary sys/[email protected]
connected to auxiliary database: destination (not mounted)
RMAN> run {
2> allocate auxiliary channel aux1 device type disk;
3> allocate auxiliary channel aux2 device type disk;
4> duplicate target database to destination nofilenamecheck;
5> }
llocated channel: aux1
channel aux1: sid=10 devtype=DISK
allocated channel: aux2
channel aux2: sid=13 devtype=DISK
Starting Duplicate Db at 03-JUL-07
printing stored script: Memory Script
set until scn 4873550;
set newname for datafile 1 to
"/database/oradata/destination/system_ts01.dbf";
set newname for datafile 2 to
"/database/oradata/destination/undo_ts01.dbf";
set newname for datafile 3 to
"/database/oradata/destination/drsys01.dbf";
set newname for datafile 4 to
"/database/oraindex/destination/ind_ts01.dbf";
set newname for datafile 5 to
"/database/oradata/destination/tools_ts01.dbf";
set newname for datafile 6 to
"/database/oradata/destination/users_ts01.dbf";
set newname for datafile 7 to
"/database/oradata/destination/ORACLEORADATATST2CWMLITE01.DBF";
set newname for datafile 8 to
"/database/oradata/destination/ORACLEORADATATST2EXAMPLE01.DBF";
set newname for datafile 9 to
"/database/oradata/destination/ORACLEORADATATST2ODM01.DBF";
set newname for datafile 10 to
"/database/oradata/destination/ORACLEORADATATST2XDB01.DBF";
set newname for datafile 11 to
"/database/oradata/destination/ORACLEORADATADATA.DBF";
set newname for datafile 12 to
"/database/oradata/destination/matrix_ts01.dbf";
restore
check readonly
clone database
executing script: Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 03-JUL-07
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/03/2007 14:35:13
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Thanks for any help,

Hi,
Where is you RMAN catalog? I think you forgot to connect to it.
To duplicate a database check that folowing applies:
1-the auxiliary instance is mounted
2-the listener for the auxiliary db is up
3-the backup pieces that RMAN is going to restore ARE AVAILABLE on the
secondary/auxilary server with SAME NAME the have on the primary server (you can use NFS to avoid the copy of the pieces from primary to auxuliary box)
Remember to be conected to both: target and auxiliary db.
I have extracted the folowing lines from an RMAN script I used to create an standby database with the DUPLICATE command (the RMAN catalog was in the primary db controlfile, and the command was run on the primary server:
$ rman target / nocatalog auxiliary sys/pwd@standbycard log=crCARD.log
RMAN> duplicate target database for standby nofilenamecheck dorecover;
I hope this helps
Gustavo Restuccia

RMAN-06023: no backup or copy of datafile

Hi,
on 10g R2 on AIX, I want to recover my DB at the time of 26 of march. The backup files are available but I receive :
RMAN> Run {
2>         SET UNTIL TIME "to_date('26-03-2011 00:00:00','DD-MM-YYYY HH24:MI:SS')";
3>      allocate channel t1 type disk;
4>      restore database;
5>      recover database;
6>      sql "alter database open";
7> }
8>
executing command: SET until clause
allocated channel: t1
channel t1: sid=155 devtype=DISK
Starting restore at 01-APR-11
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 04/01/2011 11:13:42
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 216 found to restore
RMAN-06023: no backup or copy of datafile 215 found to restore
RMAN-06023: no backup or copy of datafile 214 found to restoreWhy RMAN can't find them ?
How to verify ?
Thank for help.

Hi,
Can you please make sure the restore mechanism you are following is correct or not?
Mechanics of Restore Operations
RMAN automates the procedure for restoring files. You do not need to go into the operating system, locate the backup that you want to use, and manually copy files into the appropriate directories. When you issue a RESTORE command, RMAN directs a server session to restore the correct backups to either:
* The default location, overwriting the files with the same name currently there
* A new location, which you can specify with the SET NEWNAME command
To restore a datafile, either mount the database or keep it open and take the datafile to be restored offline. When RMAN performs a restore, it creates the restored files as datafile image copies and records them in the repository.
refer the link for more information
http://download.oracle.com/docs/cd/B12037_01/server.101/b10734/rcmconc2.htm
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

RMAN-06023: no backup or copy of datafile n found to restore

Hi,
on 11g R2 , Win 2008, I try to duplicate by RMAN NOCATALOG.
In init.ora of auxiliary I have :
init.ora
db_file_name_convert=('m:\base\OLDDB\data','m:\base\NEWDB\data')
log_file_name_convert=('m:\base\OLDDB\log', 'm:\base\NEWDB\log') 1- when duplicating RMAN displays :
set newname for datafile 109 to
"M:\BASES\OLDDB\DATA\EOIUAPP.DBF";; but for me reverse is expected since M:\BASES\OLDDB\DATA\EOIUAPP.DBF is the ancient/old name.
2-RMAN displays :
channel ORA_AUX_DISK_1: restoring datafile 00041 to M:\BASES\OLDDB\DATA\EOIUAPP.DBF But again the datafile should be restored to 'm:\base\NEWDB\data'.
And also:
channel ORA_AUX_DISK_1: reading from backup piece \\server\RMAN$\BACKUP\OLDDB\RMAN\FULL\DF_OLDDB_20120909_196_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece \\server\RMAN$\BACKUP\OLDDB\RMAN\FULL\DF_OLDDB_20120909_196_1
ORA-19504: failed to create file "M:\BASES\OLDDB\DATA\PSIMAGE.DBF";
ORA-27040: file create error, unable to create file
OSD-04002: can not open file
O/S-Error: (OS 3) file path not found. Finally :
RMAN-06023: no backup or copy of datafile n found to restore For all files.
Thanks for help.

Hello
setfilename has "BASES" but logfile convert has "base"
M:\BASESand
db_file_name_convert=('m:\base\OLDDB\data','m:\base\NEWDB\data') Best Regards
mseberg
Edited by: mseberg on Sep 20, 2012 7:41 AM

RMAN-06023: no backup or copy of datafile 12 found to restore

Hi
I'm getting the above error when trying to create a duplicate database on the same server.
Steps
1) Create backup.
CONFIGURE CONTROLFILE AUTOBACKUP ON;
backup as copy
incremental level 0
spfile
database
include current controlfile;
2) Restore / Duplicate
Have database orcl2 which is on the same server as ORCL1. Performing a no catalog recovery.
I get the following error.
executing Memory Script
executing command: SET until clause
Starting restore at 14-MAR-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=555 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2011 16:02:24
RMAN-01005: not all datafiles have backups that can be recovered to scn 666967
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
All the datafiles are not found. Not sure how this is possible as I just did the backup.
Command for Duplication :
DUPLICATE TARGET DATABASE TO ORCL2
DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
SPFILE
PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
Additional Information
RMAN> list backup
2> ;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
13 Full 16.77M DISK 00:00:01 14-MAR-11
BP Key: 13 Status: AVAILABLE Compressed: NO Tag: TAG20110314T155530
Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\ORCL1\AUTOBACKUP\2011_03_14\O1_
MF_S_745775730_6QWWOM7G_.BKP
SPFILE Included: Modification time: 14-MAR-11
SPFILE db_unique_name: ORCL1
Control File Included: Ckp SCN: 731378 Ckp time: 14-MAR-11
RMAN>
Any help would be appreciated.
Thanks.

ORADBA , thank you for your help.
Did as you suggested but still getting the same error
RMAN> DUPLICATE TARGET DATABASE TO ORCL2
2> DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
3> SPFILE
4> PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
5> SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
6> until scn = 666967;
Starting Duplicate Db at 14-MAR-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=537 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2011 18:12:47
RMAN-06136: ORACLE error from auxiliary database: ORA-01565: error in identifyin
g file 'C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
RMAN> exit
Recovery Manager complete.
C:\Documents and Settings\Administrator>rman target sys/mariorun@orcl1 nocatalog
Recovery Manager: Release 11.1.0.7.0 - Production on Mon Mar 14 18:13:20 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: ORCL1 (DBID=1129792691)
using target database control file instead of recovery catalog
RMAN> connect auxiliary sys/mariorun@orcl2
connected to auxiliary database: ORCL2 (not mounted)
RMAN>
RMAN> DUPLICATE TARGET DATABASE TO ORCL2
2> DB_FILE_NAME_CONVERT '\ORCL1','\ORCL2'
3> SPFILE
4> PARAMETER_VALUE_CONVERT '\orcl1','\orcl2'
5> SET LOG_FILE_NAME_CONVERT '\orcl1','\orcl2'
6> until scn = 666967;
Starting Duplicate Db at 14-MAR-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=97 device type=DISK
contents of Memory Script:
set until scn 666967;
restore clone spfile to 'C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA';
sql clone "alter system set spfile= ''C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFIL
EORCL2.ORA''";
executing Memory Script
executing command: SET until clause
Starting restore at 14-MAR-11
using channel ORA_AUX_DISK_1
WARNING: A restore time was estimated based on the supplied UNTIL SCN
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring SPFILE
output file name=C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFILEORCL2.ORA
channel ORA_AUX_DISK_1: reading from backup piece D:\ORACLE\FAST_RECOVERY_AREA\O
RCL1\AUTOBACKUP\2011_03_14\O1_MF_S_745775730_6QWWOM7G_.BKP
channel ORA_AUX_DISK_1: piece handle=D:\ORACLE\FAST_RECOVERY_AREA\ORCL1\AUTOBACK
UP\2011_03_14\O1_MF_S_745775730_6QWWOM7G_.BKP tag=TAG20110314T155530
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
Finished restore at 14-MAR-11
sql statement: alter system set spfile= ''C:\ORACLE\ORA11G\PRODUCT\DATABASE\SPFI
LEORCL2.ORA''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL2'' comment=
''duplicate'' scope=spfile";
sql clone "alter system set audit_file_dest =
''c:\oracle\ora11g\admin\orcl2\adump'' comment=
'''' scope=spfile";
sql clone "alter system set control_files =
''c:\oracle\ora11g\oradata\orcl2\control01.ctl'', ''c:\oracle\ora11g\oradata\or
cl2\control02.ctl'', ''c:\oracle\ora11g\oradata\orcl2\control03.ctl'' comment=
'''' scope=spfile";
sql clone "alter system set LOG_FILE_NAME_CONVERT =
''\orcl1'', ''\orcl2'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount ;
executing Memory Script
sql statement: alter system set db_name = ''ORCL2'' comment= ''duplicate'' sco
pe=spfile
sql statement: alter system set audit_file_dest = ''c:\oracle\ora11g\admin\orc
l2\adump'' comment= '''' scope=spfile
sql statement: alter system set control_files = ''c:\oracle\ora11g\oradata\orc
l2\control01.ctl'', ''c:\oracle\ora11g\oradata\orcl2\control02.ctl'', ''c:\oracl
e\ora11g\oradata\orcl2\control03.ctl'' comment= '''' scope=spfile
sql statement: alter system set LOG_FILE_NAME_CONVERT = ''\orcl1'', ''\orcl2''
comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 267825152 bytes
Fixed Size 1346712 bytes
Variable Size 100664168 bytes
Database Buffers 163577856 bytes
Redo Buffers 2236416 bytes
contents of Memory Script:
set until scn 666967;
set newname for datafile 1 to
"D:\ORACLE\ORADATA\ORCL2\SYSTEM01.DBF";
set newname for datafile 2 to
"D:\ORACLE\ORADATA\ORCL2\SYSAUX01.DBF";
set newname for datafile 3 to
"D:\ORACLE\ORADATA\ORCL2\UNDOTBS01.DBF";
set newname for datafile 4 to
"D:\ORACLE\ORADATA\ORCL2\IM_DATA_01.DAT";
set newname for datafile 5 to
"D:\ORACLE\ORADATA\ORCL2\IM_IDX_01.DAT";
set newname for datafile 6 to
"D:\ORACLE\ORADATA\ORCL2\IM_INV_DATA_01.DAT";
set newname for datafile 7 to
"D:\ORACLE\ORADATA\ORCL2\IM_INV_DATA_02.DAT";
set newname for datafile 8 to
"D:\ORACLE\ORADATA\ORCL2\IM_INV_IDX_01.DAT";
set newname for datafile 9 to
"D:\ORACLE\ORADATA\ORCL2\IM_INV_IDX_02.DAT";
set newname for datafile 10 to
"D:\ORACLE\ORADATA\ORCL2\IM_PROC_LOG_01.DAT";
set newname for datafile 11 to
"D:\ORACLE\ORADATA\ORCL2\IM_PROC_NOLOG_01.DAT";
set newname for datafile 12 to
"D:\ORACLE\ORADATA\ORCL2\USERS01.DBF";
restore
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 14-MAR-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=555 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2011 18:13:59
RMAN-01005: not all datafiles have backups that can be recovered to scn 666967
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
Any suggestions are appreciated.

Another RMAN-06023 Error

Hi all !
I'm quite new to RMAN and facing some problem here. DB is 10gR2 and filesystem has crashed a couple of weeks ago.
I'm trying to restore from backupset, but facing some trouble on restore database :
RMAN> restore controlfile from '/swapcom/flash_recovery_area/SWAPCOM/backupset/backupset/2007_08_02/o1_mf_ncsn1_TAG20070802T172400_3c3yckh7_.bkp';
Starting restore at 30-AUG-07
using channel ORA_DISK_1
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
output filename=/export/swapcom/oracle/oradata/swapcom/swapcom/control01.ctl
output filename=/export/swapcom/oracle/oradata/swapcom/swapcom/control02.ctl
output filename=/export/swapcom/oracle/oradata/swapcom/swapcom/control03.ctl
Finished restore at 30-AUG-07
RMAN> restore spfile from '/swapcom/flash_recovery_area/SWAPCOM/backupset/backupset/2007_08_02/o1_mf_ncsn1_TAG20070802T172400_3c3yckh7_.bkp';
Starting restore at 30-AUG-07
using channel ORA_DISK_1
channel ORA_DISK_1: autobackup found: /swapcom/flash_recovery_area/SWAPCOM/backupset/backupset/2007_08_02/o1_mf_ncsn1_TAG20070802T172400_3c3yckh7_.bkp
channel ORA_DISK_1: SPFILE restore from autobackup complete
Finished restore at 30-AUG-07
RMAN> startup mount
database is already started
database mounted
released channel: ORA_DISK_1
RMAN> restore database;
Starting restore at 30-AUG-07
Starting implicit crosscheck backup at 30-AUG-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
Crosschecked 62 objects
Finished implicit crosscheck backup at 30-AUG-07
Starting implicit crosscheck copy at 30-AUG-07
using channel ORA_DISK_1
Crosschecked 8 objects
Finished implicit crosscheck copy at 30-AUG-07
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 08/30/2007 15:24:59
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Any guidance would be highly appreciated. Thx in advance.

Forgot to mention I have of course been searching on this forum and tried many things but am getting kinda confused...

RMAN-06023: no backup or copy of datafile 54 found to restore

Hi
Edited by: shakilshaikh on May 20, 2011 1:29 AM

yep they are avaiable...do you think this has to do with resetlogs(as i have used that like 4 times in last 2 days)....doing some testing....as the incarnations changes everytime we reset the logs
RMAN> list incarnation of database;
List of Database Incarnations
DB Key Inc Key DB Name DB ID            STATUS Reset SCN Reset Time
1       1       NGENPOC 2765214148       ORPHAN 3178766417 01-DEC-09
2       2       NGENPOC 2765214148       ORPHAN 8413828170590 03-DEC-09
3       3       NGENPOC 2765214148       ORPHAN 8413828170590 04-DEC-09
4       4       NGENPOC 2765214148       CURRENT 8413828170591 07-DEC-09

RMAN - ERROR 06023

Hi,
pls any one give the solution
RMAN> run{
2> restore database;
3> recover database;
4> }
Starting restore at 21-APR-09
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 04/21/2009 12:36:00
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 11 found to restore
in this the datafile 11 is already dropped offline, i don't wan to restore it, how can i skip the datafile 11 and restore remaing files to recover the database.

check the link unable to restore datafile from backup
Regards,
Vipin

RMAN duplicate target using set until telling me it can not find data files

I have RMAN scripts that I use freqently to clone a database from DB (production) to another (non-prod). These work just fine. I use the set until so that I can tell it at what point I want the new DB to be created from the backups of the source.
I had a request to go back a few weeks and the backup files (I do compressed backups to disk) were on tape. I had my backup person restore my backup directory for the source DB as it looked on a certain day (May 28). I have an 8 day retention policy and so the backup files that were restored showed files all the way back to 5/20 ( includes the point I want to use in my set until clause).
However, whenever I try to execute the rman clone, it tells me for each datafile:
RMAN-06023: no backup or copy of datafile 1 found to restore
Like I said, I am able to do this for a current backup that is on disk. I moved the backup files to the source db server and it works fine. However, from these files restored from tape it errors.
Here is the RMAN script:
spool log to c:\temp\clone_CSPROD_CSPRSUM1.log;
#connect to catalog <catalog info>
# target is the source and auxiliary is destination
#connect target <put in source info here>
#connect auxiliary /
run {
allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
##Archivelog number get from sql archive log list command
#set until sequence 831;
set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
duplicate target database to CSPRSUM1 nofilenamecheck
logfile
group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
Exit
Here is the output:
Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
Recovery Manager11.1.0.7.0
RMAN> #connect catalog <redacted info>>
2> # target is the source and auxiliary is destination
3> #connect target <redacted info>
4> #connect auxiliary /
5>
6> run {
7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
12> ##Archivelog number get from sql archive log list command
13> #set until sequence 831;
14> set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
15> duplicate target database to CSPRSUM1 nofilenamecheck
16> logfile
17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
20> }
starting full resync of recovery catalog
full resync complete
allocated channel: d1
channel d1: SID=534 device type=DISK
allocated channel: d2
channel d2: SID=533 device type=DISK
allocated channel: d3
channel d3: SID=532 device type=DISK
allocated channel: d4
channel d4: SID=531 device type=DISK
allocated channel: a1
channel a1: SID=530 device type=DISK
executing command: SET until clause
Starting Duplicate Db at 15-JUN-11
RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
contents of Memory Script:
set until scn 260398799;
set newname for datafile 1 to
"+data";
set newname for datafile 2 to
"+data";
set newname for datafile 3 to
"+data";
set newname for datafile 4 to
"+data";
set newname for datafile 5 to
"+data";
set newname for datafile 6 to
"+data";
set newname for datafile 7 to
"+data";
set newname for datafile 8 to
"+data";
set newname for datafile 9 to
"+data";
set newname for datafile 10 to
"+data";
set newname for datafile 11 to
"+data";
set newname for datafile 12 to
"+data";
set newname for datafile 13 to
"+data";
set newname for datafile 14 to
"+data";
set newname for datafile 15 to
"+data";
set newname for datafile 16 to
"+data";
set newname for datafile 17 to
"+data";
set newname for datafile 18 to
"+data";
set newname for datafile 19 to
"+data";
set newname for datafile 20 to
"+data";
set newname for datafile 21 to
"+data";
set newname for datafile 22 to
"+data";
set newname for datafile 23 to
"+data";
set newname for datafile 24 to
"+data";
set newname for datafile 25 to
"+data";
set newname for datafile 26 to
"+data";
set newname for datafile 27 to
"+data";
set newname for datafile 28 to
"+data";
set newname for datafile 29 to
"+data";
set newname for datafile 30 to
"+data";
set newname for datafile 31 to
"+data";
set newname for datafile 32 to
"+data";
set newname for datafile 33 to
"+data";
set newname for datafile 34 to
"+data";
set newname for datafile 35 to
"+data";
set newname for datafile 36 to
"+data";
set newname for datafile 37 to
"+data";
set newname for datafile 38 to
"+data";
set newname for datafile 39 to
"+data";
set newname for datafile 40 to
"+data";
set newname for datafile 41 to
"+data";
set newname for datafile 42 to
"+data";
set newname for datafile 43 to
"+data";
set newname for datafile 44 to
"+data";
set newname for datafile 45 to
"+data";
set newname for datafile 46 to
"+data";
set newname for datafile 47 to
"+data";
set newname for datafile 48 to
"+data";
set newname for datafile 49 to
"+data";
set newname for datafile 50 to
"+data";
set newname for datafile 51 to
"+data";
set newname for datafile 52 to
"+data";
set newname for datafile 53 to
"+data";
set newname for datafile 54 to
"+data";
set newname for datafile 55 to
"+data";
set newname for datafile 56 to
"+data";
set newname for datafile 57 to
"+data";
set newname for datafile 58 to
"+data";
set newname for datafile 59 to
"+data";
set newname for datafile 60 to
"+data";
set newname for datafile 61 to
"+data";
set newname for datafile 62 to
"+data";
set newname for datafile 63 to
"+data";
set newname for datafile 64 to
"+data";
set newname for datafile 65 to
"+data";
set newname for datafile 66 to
"+data";
set newname for datafile 67 to
"+data";
set newname for datafile 68 to
"+data";
set newname for datafile 69 to
"+data";
set newname for datafile 70 to
"+data";
set newname for datafile 71 to
"+data";
set newname for datafile 72 to
"+data";
set newname for datafile 73 to
"+data";
set newname for datafile 74 to
"+data";
set newname for datafile 75 to
"+data";
set newname for datafile 76 to
"+data";
set newname for datafile 77 to
"+data";
set newname for datafile 78 to
"+data";
set newname for datafile 79 to
"+data";
set newname for datafile 80 to
"+data";
set newname for datafile 81 to
"+data";
set newname for datafile 82 to
"+data";
set newname for datafile 83 to
"+data";
set newname for datafile 84 to
"+data";
set newname for datafile 85 to
"+data";
set newname for datafile 86 to
"+data";
set newname for datafile 87 to
"+data";
set newname for datafile 88 to
"+data";
set newname for datafile 89 to
"+data";
set newname for datafile 90 to
"+data";
set newname for datafile 91 to
"+data";
set newname for datafile 92 to
"+data";
set newname for datafile 93 to
"+data";
set newname for datafile 94 to
"+data";
set newname for datafile 95 to
"+data";
set newname for datafile 96 to
"+data";
set newname for datafile 97 to
"+data";
set newname for datafile 98 to
"+data";
set newname for datafile 99 to
"+data";
set newname for datafile 100 to
"+data";
set newname for datafile 101 to
"+data";
set newname for datafile 102 to
"+data";
set newname for datafile 103 to
"+data";
set newname for datafile 104 to
"+data";
set newname for datafile 105 to
"+data";
set newname for datafile 106 to
"+data";
set newname for datafile 107 to
"+data";
set newname for datafile 108 to
"+data";
set newname for datafile 109 to
"+data";
set newname for datafile 110 to
"+data";
set newname for datafile 111 to
"+data";
set newname for datafile 112 to
"+data";
set newname for datafile 113 to
"+data";
set newname for datafile 114 to
"+data";
set newname for datafile 115 to
"+data";
set newname for datafile 116 to
"+data";
set newname for datafile 117 to
"+data";
set newname for datafile 118 to
"+data";
set newname for datafile 119 to
"+data";
set newname for datafile 120 to
"+data";
set newname for datafile 121 to
"+data";
set newname for datafile 122 to
"+data";
restore
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 15-JUN-11
released channel: d1
released channel: d2
released channel: d3
released channel: d4
released channel: a1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/15/2011 11:21:42
RMAN-01005: not all datafiles have backups that can be recovered to scn 260398799
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 122 found to restore
RMAN-06023: no backup or copy of datafile 121 found to restore
RMAN-06023: no backup or copy of datafile 120 found to restore
RMAN-06023: no backup or copy of datafile 119 found to restore
RMAN-06023: no backup or copy of datafile 118 found to restore
RMAN-06023: no backup or copy of datafile 117 found to restore
RMAN-06023: no backup or copy of datafile 116 found to restore
RMAN-06023: no backup or copy of datafile 115 found to restore
RMAN-06023: no backup or copy of datafile 114 found to restore
RMAN-06023: no backup or copy of datafile 113 found to restore
RMAN-06023: no backup or copy of datafile 112 found to restore
RMAN-06023: no backup or copy of datafile 111 found to restore
RMAN-06023: no backup or copy of datafile 110 found to restore
RMAN-06023: no backup or copy of datafile 109 found to restore
RMAN-06023: no backup or copy of datafile 108 found to restore
RMAN-06023: no backup or copy of datafile 107 found to restore
RMAN-06023: no backup or copy of datafile 106 found to restore
RMAN-06023: no backup or copy of datafile 105 found to restore
RMAN-06023: no backup or copy of datafile 104 found to restore
RMAN-06023: no backup or copy of datafile 103 found to restore
RMAN-06023: no backup or copy of datafile 102 found to restore
RMAN-06023: no backup or copy of datafile 101 found to restore
RMAN-06023: no backup or copy of datafile 100 found to restore
RMAN-06023: no backup or copy of datafile 99 found to restore
RMAN-06023: no backup or copy of datafile 98 found to restore
RMAN-06023: no backup or copy of datafile 97 found to restore
RMAN-06023: no backup or copy of datafile 96 found to restore
RMAN-06023: no backup or copy of datafile 95 found to restore
RMAN-06023: no backup or copy of datafile 94 found to restore
RMAN-06023: no backup or copy of datafile 93 found to restore
RMAN-06023: no backup or copy of datafile 92 found to restore
RMAN-06023: no backup or copy of datafile 91 found to restore
RMAN-06023: no backup or copy of datafile 90 found to restore
RMAN-06023: no backup or copy of datafile 89 found to restore
RMAN-06023: no backup or copy of datafile 88 found to restore
RMAN-06023: no backup or copy of datafile 87 found to restore
RMAN-06023: no backup or copy of datafile 86 found to restore
RMAN-06023: no backup or copy of datafile 85 found to restore
RMAN-06023: no backup or copy of datafile 84 found to restore
RMAN-06023: no backup or copy of datafile 83 found to restore
RMAN-06023: no backup or copy of datafile 82 found to restore
RMAN-06023: no backup or copy of datafile 81 found to restore
RMAN-06023: no backup or copy of datafile 80 found to restore
RMAN-06023: no backup or copy of datafile 79 found to restore
RMAN-06023: no backup or copy of datafile 78 found to restore
RMAN-06023: no backup or copy of datafile 77 found to restore
RMAN-06023: no backup or copy of datafile 76 found to restore
RMAN-06023: no backup or copy of datafile 75 found to restore
RMAN-06023: no backup or copy of datafile 74 found to restore
RMAN-06023: no backup or copy of datafile 73 found to restore
RMAN-06023: no backup or copy of datafile 72 found to restore
RMAN-06023: no backup or copy of datafile 71 found to restore
RMAN-06023: no backup or copy of datafile 70 found to restore
RMAN-06023: no backup or copy of datafile 69 found to restore
RMAN-06023: no backup or copy of datafile 68 found to restore
RMAN-06023: no backup or copy of datafile 67 found to restore
RMAN-06023: no backup or copy of datafile 66 found to restore
RMAN-06023: no backup or copy of datafile 65 found to restore
RMAN-06023: no backup or copy of datafile 64 found to restore
RMAN-06023: no backup or copy of datafile 63 found to restore
RMAN-06023: no backup or copy of datafile 62 found to restore
RMAN-06023: no backup or copy of datafile 61 found to restore
RMAN-06023: no backup or copy of datafile 60 found to restore
RMAN-06023: no backup or copy of datafile 59 found to restore
RMAN-06023: no backup or copy of datafile 58 found to restore
RMAN-06023: no backup or copy of datafile 57 found to restore
RMAN-06023: no backup or copy of datafile 56 found to restore
RMAN-06023: no backup or copy of datafile 55 found to restore
RMAN-06023: no backup or copy of datafile 54 found to restore
RMAN-06023: no backup or copy of datafile 53 found to restore
RMAN-06023: no backup or copy of datafile 52 found to restore
RMAN-06023: no backup or copy of datafile 51 found to restore
RMAN-06023: no backup or copy of datafile 50 found to restore
RMAN-06023: no backup or copy of datafile 49 found to restore
RMAN-06023: no backup or copy of datafile 48 found to restore
RMAN-06023: no backup or copy of datafile 47 found to restore
RMAN-06023: no backup or copy of datafile 46 found to restore
RMAN-06023: no backup or copy of datafile 45 found to restore
RMAN-06023: no backup or copy of datafile 44 found to restore
RMAN-06023: no backup or copy of datafile 43 found to restore
RMAN-06023: no backup or copy of datafile 42 found to restore
RMAN-06023: no backup or copy of datafile 41 found to restore
RMAN-06023: no backup or copy of datafile 40 found to restore
RMAN-06023: no backup or copy of datafile 39 found to restore
RMAN-06023: no backup or copy of datafile 38 found to restore
RMAN-06023: no backup or copy of datafile 37 found to restore
RMAN-06023: no backup or copy of datafile 36 found to restore
RMAN-06023: no backup or copy of datafile 35 found to restore
RMAN-06023: no backup or copy of datafile 34 found to restore
RMAN-06023: no backup or copy of datafile 33 found to restore
RMAN-06023: no backup or copy of datafile 32 found to restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 25 found to restore
RMAN-06023: no backup or copy of datafile 24 found to restore
RMAN-06023: no backup or copy of datafile 23 found to restore
RMAN-06023: no backup or copy of datafile 22 found to restore
RMAN-06023: no backup or copy of datafile 21 found to restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN> Exit
Recovery Manager complete.
Edited by: kerrygm on Jun 15, 2011 11:36 AM

Maybe making progress.
I got into RMAN and did a List backup command. In looking at the output, I see that it does have the 5/20 backup showing. Here is part of the output:
BS Key Type LV Size Device Type Elapsed Time Completion Time
965689 Full 19.86M DISK 00:00:01 16-JUN-11
BP Key: 967942 Status: AVAILABLE Compressed: NO Tag: TAG20110616T231223
Piece Name: F:\BACKUPS\CSPROD\C-368871413-20110616-01
SPFILE Included: Modification time: 16-JUN-11
SPFILE db_unique_name: CSPROD
Control File Included: Ckp SCN: 369596068 Ckp time: 16-JUN-11
BS Key Size Device Type Elapsed Time Completion Time
966218 403.84M DISK 00:00:00 20-MAY-11
BP Key: 967842 Status: AVAILABLE Compressed: YES Tag: TAG20110520T231012
Piece Name: F:\BACKUPS\CSPROD\A1\CSPROD_ARCH_5844
List of Archived Logs in backup set 966218
Thrd Seq Low SCN Low Time Next SCN Next Time
1 2112 237027300 20-MAY-11 237046947 20-MAY-11
1 2113 *237046947* 20-MAY-11 237059284 20-MAY-11
1 2114 237059284 20-MAY-11 237216514 20-MAY-11
1 2115 237216514 20-MAY-11 237709545 20-MAY-11
1 2116 237709545 20-MAY-11 237722825 20-MAY-11
1 2117 237722825 20-MAY-11 237730431 20-MAY-11
1 2118 237730431 20-MAY-11 237860199 20-MAY-11
I then changed my rman script to use the *237046947* SCN number that says it is from 5/20. I them kicked off my rman script and got the following result.
Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
Recovery Manager11.1.0.7.0
RMAN> #connect catalog 'rmancat/rmancat@rmancat';
2> # target is the source and auxiliary is destination
3> #connect target sys/<pwd>@csprod
4> #connect auxiliary /
5>
6> run {
7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
12> ##Archivelog number get from sql archive log list command
13> set until sequence 237046947;
14> ##set until time "to_date('2011-05-20 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
15> duplicate target database to CSPRSUM1 nofilenamecheck
16> logfile
17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
20> }
allocated channel: d1
channel d1: SID=532 device type=DISK
allocated channel: d2
channel d2: SID=533 device type=DISK
allocated channel: d3
channel d3: SID=531 device type=DISK
allocated channel: d4
channel d4: SID=555 device type=DISK
allocated channel: a1
channel a1: SID=534 device type=DISK
executing command: SET until clause
Starting Duplicate Db at 17-JUN-11
RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
contents of Memory Script:
set until scn 373021170;
set newname for datafile 1 to
"+data";
set newname for datafile 2 to
Starting restore at 17-JUN-11
channel d1: starting datafile backup set restore
channel d1: specifying datafile(s) to restore from backup set
channel d1: restoring datafile 00003 to +DATA
channel d2: restoring datafile 00122 to +DATA
channel d2: reading from backup piece F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149
channel d3: starting datafile backup set restore
channel d3: specifying datafile(s) to restore from backup set
channel d3: restoring datafile 00002 to +DATA
channel d3: restoring datafile 00020 to +DATA
channel d4: restoring datafile 00120 to +DATA
channel d4: reading from backup piece F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147
channel d1: piece handle=F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 tag=TAG20110616T230013
channel d1: restored backup piece 1
channel d1: restore complete, elapsed time: 00:01:15
channel d4: piece handle=F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147 tag=TAG20110616T230013
channel d4: restored backup piece 1
channel d4: restore complete, elapsed time: 00:03:15
channel d2: piece handle=F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149 tag=TAG20110616T230013
channel d2: restored backup piece 1
channel d2: restore complete, elapsed time: 00:03:35
channel d3: piece handle=F:\BACKUPS\CSPROD\D1\CSPROD_DATA_6146 tag=TAG20110616T230013
channel d3: restored backup piece 1
channel d3: restore complete, elapsed time: 00:04:55
Finished restore at 17-JUN-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "CSPRSUM1" RESETLOGS ARCHIVELOG
MAXLOGFILES 23
MAXLOGMEMBERS 3
MAXDATAFILES 1021
MAXINSTANCES 8
MAXLOGHISTORY 584
LOGFILE
GROUP 1 ( '+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log' ) SIZE 50 M ,
GROUP 2 ( '+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log' ) SIZE 50 M ,
GROUP 3 ( '+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log' ) SIZE 50 M
DATAFILE
'+DATA/csprsum1/datafile/system.1535.754067379'
CHARACTER SET WE8MSWIN1252
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy RECID=1 STAMP=754067676 file name=+DATA/csprsum1/datafile/sysaux.1536.754067379
datafile 121 switched to datafile copy
input datafile copy RECID=120 STAMP=754067677 file name=+DATA/csprsum1/datafile/waapp.1653.754067403
datafile 122 switched to datafile copy
input datafile copy RECID=121 STAMP=754067677 file name=+DATA/csprsum1/datafile/cu_custom.1549.754067381
contents of Memory Script:
set until scn 373021170;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 17-JUN-11
starting media recovery
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '+DATA/csprsum1/datafile/system.1535.754067379'
released channel: d1
released channel: d2
released channel: d3
released channel: d4
released channel: a1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/17/2011 15:14:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 3818 and starting SCN of 372868482 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3817 and starting SCN of 372685133 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3816 and starting SCN of 372593528 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3815 and starting SCN of 372374385 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3814 and starting SCN of 372325053 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3813 and starting SCN of 372316138 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3812 and starting SCN of 372249619 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3811 and starting SCN of 371775981 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3810 and starting SCN of 371643855 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3809 and starting SCN of 371614442 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3808 and starting SCN of 371432892 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3807 and starting SCN of 371121955 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3806 and starting SCN of 371047786 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3805 and starting SCN of 371029095 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3804 and starting SCN of 371018252 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3803 and starting SCN of 370947755 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3802 and starting SCN of 370857440 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3801 and starting SCN of 370814417 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3800 and starting SCN of 370797061 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3799 and starting SCN of 370756569 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3798 and starting SCN of 370746833 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3797 and starting SCN of 370746693 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3796 and starting SCN of 370746568 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3795 and starting SCN of 370746068 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3794 and starting SCN of 370745451 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3793 and starting SCN of 370733767 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3792 and starting SCN of 370674629 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3791 and starting SCN of 370501026 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3790 and starting SCN of 370498513 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3789 and starting SCN of 370497977 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3788 and starting SCN of 370497635 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3787 and starting SCN of 370497319 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3786 and starting SCN of 370496938 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3785 and starting SCN of 370495428 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3784 and starting SCN of 370491173 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3783 and starting SCN of 370390074 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3782 and starting SCN of 370385574 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3781 and starting SCN of 370385310 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3780 and starting SCN of 370385044 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3779 and starting SCN of 370368486 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3778 and starting SCN of 370333960 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3777 and starting SCN of 370330980 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3776 and starting SCN of 370327876 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3775 and starting SCN of 370174433 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3774 and starting SCN of 370148373 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3773 and starting SCN of 370147821 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3772 and starting SCN of 370147623 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3771 and starting SCN of 370141528 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3770 and starting SCN of 369711271 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3769 and starting SCN of 369621694 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3768 and starting SCN of 369595614 found to restore
RMAN> Exit
Recovery Manager complete.
What I am not sure is if the SCN I used in my set until sequence command was from 5/20, when I look at the backup pieces that it is reading to restore from, they appear to be from backup files taken from June.
(e.g channel d1: reading from backup piece F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 -- this is a 6/16 backup file).
Also, as you can see it was not able to do a media recovery.
Thanks in advance for your help.

Rman recovery issue in oracle database 10g

hi all,
i have two backups of database one is full and of 3 days previous than sysdate and one is incremental level 1 of sysdate.i have recover database successfully upto 3 days previous and open database with resetlogs but recovering the incremental backup i got the following error
RMAN> restore database until time "to_date('06/10/09 13:09:00','MM/DD/YY HH24:MI
*:SS')";*
*Starting restore at 10-JUN-09*
*using channel ORA_DISK_1*
*RMAN-00571: ===========================================================*
*RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============*
*RMAN-00571: ===========================================================*
*RMAN-03002: failure of restore command at 06/10/2009 14:23:13*
*RMAN-20207: UNTIL TIME or RECOVERY WINDOW is before RESETLOGS time*
what should i do in this regard to recover upto sysdate with rman

RMAN> reset database to incarnation 2;
using target database control file instead of recovery catalog
database reset to incarnation 2
RMAN> restore database until time "to_date('06/10/09 01:09:00','MM/DD/YY HH24:MI
*:SS')";*
*Starting restore at 11-JUN-09*
*allocated channel: ORA_DISK_1*
*channel ORA_DISK_1: sid=155 devtype=DISK*
*RMAN-00571: ===========================================================*
*RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============*
*RMAN-00571: ===========================================================*
*RMAN-03002: failure of restore command at 06/11/2009 10:28:42*
*RMAN-06026: some targets not found - aborting restore*
*RMAN-06023: no backup or copy of datafile 4 found to restore*
*RMAN-06023: no backup or copy of datafile 3 found to restore*
*RMAN-06023: no backup or copy of datafile 2 found to restore*
*RMAN-06023: no backup or copy of datafile 1 found to restore*
*RMAN> restore database until time "to_date('06/10/09 13:09:00','MM/DD/YY HH24:MI*
*:SS')";*
*Starting restore at 11-JUN-09*
*using channel ORA_DISK_1*
*channel ORA_DISK_1: starting datafile backupset restore*
*channel ORA_DISK_1: specifying datafile(s) to restore from backup set*
*restoring datafile 00001 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\WINDB\SYSTEM01.DBF*
*restoring datafile 00002 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\WINDB\UNDOTBS01.DBF*
*restoring datafile 00003 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\WINDB\SYSAUX01.DBF*
*restoring datafile 00004 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\WINDB\USERS01.DBF*
*restoring datafile 00005 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\WINDB\PROJECT1.DBF*
*restoring datafile 00006 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\WINDB\LIMS1.DBF*
*restoring datafile 00007 to C:\ORACLE\PRODUCT\10.2.0\ORADATA\WINDB\FMADATA01.DBF*
*channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC*
*OVERY_AREA\WINDB\BACKUPSET\2009_06_10\O1_MF_NNND1_TAG20090610T130709_52YTFH6T_.B*
*KP*
*channel ORA_DISK_1: restored backup piece 1*
*piece handle=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\WINDB\BACKUPSET\2009_0*
*6_10\O1_MF_NNND1_TAG20090610T130709_52YTFH6T_.BKP tag=TAG20090610T130709*
*channel ORA_DISK_1: restore complete, elapsed time: 00:01:26*
*Finished restore at 11-JUN-09*
*RMAN> recover database until time "to_date('06/10/09 13:09:00','MM/DD/YY HH24:MI*
*:SS')";*
*Starting recover at 11-JUN-09*
*using channel ORA_DISK_1*
*starting media recovery*
*archive log thread 1 sequence 59 is already on disk as file C:\ORACLE\PRODUCT\10*
*.2.0\FLASH_RECOVERY_AREA\WINDB\ARCHIVELOG\2009_06_10\O1_MF_1_59_52YVW5X9_.ARC*
*archive log filename=C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\WINDB\ARCHIVEL*
*OG\2009_06_10\O1_MF_1_59_52YVW5X9_.ARC thread=1 sequence=59*
*media recovery complete, elapsed time: 00:00:02*
*Finished recover at 11-JUN-09*
*RMAN>*
then after performing the recovery when i tried to open the database
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
i have also tried to open it with resetlogs
any suggestion to open it now ?

RMAN unable to read backupset file during Cloning

Hi,
I'm performing cloning operation on windows to windows. On target I have taken backup through rman using recovery catalog. I've taken fresh backup of database along with archivelogs and delete the obsoleted one using rman recovery catalog repository.
When I connect to Target,Recovery catalog and auxiliary instance after executing some commands RMAN gives error that it is unable to read backupset file. What could be the reason for this. I'm posting the Error Portion of RMAN listing please see it and tell me what could be the reasons as I have taken fresh backups and it seems that it is unable to read that particular backup.
channel ORA_AUX_DISK_1: reading from backup piece C:\ORACLEBASE\PRODUCT\10.2.0\F
LASH_RECOVERY_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M
6YLD_.BKP
ORA-19870: error reading backup piece C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVER
Y_AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_.BKP
ORA-19505: failed to identify file "C:\ORACLEBASE\PRODUCT\10.2.0\FLASH_RECOVERY_
AREA\ORCL\BACKUPSET\2010_09_27\O1_MF_NNNDF_TAG20100927T125050_6B0M6YLD_.BKP"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/27/2010 13:17:22
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>
Please help me in this matter.
Regards,
Abbasi

If your RMAN backup exist on target server path.
Target Server: C:\Oracle\RMAN_BACKUP\
Put it on the same location in the auxiliary server.
Auxiliary Server: C:\Oracle\RMAN_BACKUP\
During cloning also connect with your recovery catalog as you are using recover catalog for the target server.
Regards
Asif Kabir
Edited by: asifkabirdba on Sep 27, 2010 2:51 PM

RMAN-06023

Similar Messages

Maybe you are looking for