RMAN-06031: could not translate database keyword

what is the solution following error
RMAN> list backup summary;
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 02/24/2011 14:24:42
ORA-01555: snapshot too old: rollback segment number 20 with name "_SYSSMU20_328
6862503$" too small
RMAN-06031: could not translate database keyword

ORA-01555: snapshot too old
ORA-01555 Snapshot too old
Regards
Asif Kabir

Similar Messages

RMAN-06403: could not obtain a fully authorized session

Hi,
I am trying to duplicate 10204 instance with ASM to clone machine .
I have checked that i can connect to the target / aux / rman instances before runing the duplicate script as you can see bellow.
Also i checked that the Env. variable are correct :
$ ps -ef | grep pmon
oracle    5157     1 0 Feb16 ?        00:00:17 asm_pmon_+ASM
oracle   30838     1 0 17:15 ?        00:00:00 ora_pmon_b3dev
$ echo $ORACLE_HOME
/software/oracle/B3DEV10gR2
$ echo $ORACLE_SID
b3dev
-- AUX
$ sqlplus sys/xxxx@b3dev as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:25 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
-- TARGET
$ sqlplus sysxxxx@MYB3PROD as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:44 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
-- catalog
$ sqlplus catman_b3prd/xxxxx@rman
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:59 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsI opened the AUX instance in NOMOUNT mode , and then run the rman script.
rman TARGET sys/xxxx@MYB3PROD CATALOG catman_b3prd/xxxx@rman AUXILIARY sys/xxxx@b3dev
RMAN>
run
allocate channel 'dev_0' type 'sbt_tape'
parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=b3prd,OB2BARLIST=b3prd)' maxopenfiles 16;
set until time "to_date('17-11-2010 10:45:00','dd-mm-yyyy hh24:mi:ss')";
duplicate target database to b3dev
PFILE = /software/oracle/B3DEV10gR2/dbs/initb3dev.ora
NOFILENAMECHECK;
}Then I got the following error:
Starting Duplicate Db at 21-NOV-10
released channel: dev_0
released channel: dev_1
released channel: dev_2
released channel: dev_3
released channel: dev_4
released channel: dev_5
released channel: dev_6
released channel: dev_7
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/21/2010 17:14:20
RMAN-06403: could not obtain a fully authorized session
RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not availableThanks

Thanks ,
But its not seems to be my case:
SQL> startup nomount pfile='initb3dev.ora';
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size                  1271616 bytes
Variable Size             301992128 bytes
Database Buffers          763363328 bytes
Redo Buffers                7114752 bytesrman TARGET sys/xxxxx@MYB3PROD CATALOG catman_b3prd/xxxx@rman AUXILIARY sys/xxxx@b3dev
Recovery Manager: Release 10.2.0.4.0 - Production on Sun Nov 21 17:34:27 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: B3PRD (DBID=3967311322)
connected to recovery catalog database
connected to auxiliary database (not started)
No problem to connect using sqlplus with @ .
No problem to connect with RMAN , to target/AXU/RMAN catalog
Yet , i am still getting the error message
Thanks

ERROR 2009-05-24 08:46:36 CJS-00288 Could not update database statistics.

Hi all.
i am in the middle of SAP ECC 5.0 installation .In the Database instance installation at the step 29 database update statistics, system stops giving error
ERROR 2009-05-24 08:46:44
CJS-00288 Could not update database statistics.<br>
DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPDB5 returned 3.<br>SOLUTION: See brconnect.log for details.
when i checked in brconnect.log i found below error message
BR0801I BRCONNECT 7.00 (16)
BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
BR0310E Connect to database instance DB5 failed
BR0280I BRCONNECT time stamp: 2009-05-24 08.46.44
BR0804I BRCONNECT terminated with errors
Q))Which oracle version are you using since BRTOOLS 7.0 is designed to work with Oracle 10g?
If you are using an oracle 9.2.* it is needed to install oracle instant client or to downgrade your db tools (brt* tools)...... Through :Forums I came to know that we have to downgrade the br*tools to
Could you please help me how to downgrade the Brtools or could you please suggest me how to proceed
please help me
Thanks
Senthil

Hi All,
Thanks for your help, that error it has passed but now in 31 st step starting RFC jobs
i get this error
ERROR 2009-05-25 18:08:05
FRF-00007 Unable to open RFC connection.
ERROR 2009-05-25 18:08:05
FRF-00063 RFC logon failed with message: Failed: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failedConnect_PM GWHOST=CTSINSAPEC5, GWSERV=sapgw00, ASHOST=CTSINSAPEC5, SYSNR=00
but early during the last error update database statistics the SAP MMC console was up and running but now SAP is down during this error
i tried to start SAP manually but it never works dispatcher goes down, i searched in forums and thought to update the kernal, so i updated the kernal also and tried it then also same error
please help me my situation is very pathatic, i will be greatful if you help me
Thanks
Senthil

ERROR 2008-04-30 09:10:35 CJS-00288 Could not update database statistics.

Hi Gurus..
Hi i am in the middle of NW 2004 installation . At the step 29 database update statistics, system stops giving error
ERROR 2008-04-30 09:10:35
CJS-00288 Could not update database statistics.
DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPP47 returned
3.SOLUTION: See brconnect.log for details.
When i checked in brconnect.log i found below error message
BR0801I BRCONNECT 7.00 (16)
BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
BR0310E Connect to database instance P47 failed
BR0280I BRCONNECT time stamp: 2008-04-30 09.10.35
BR0804I BRCONNECT terminated with errors
Q))Which oracle version are you using since BRTOOLS 7.0 is desinged to work with Oracle 10g?
If you are using an oracle 9.2.* it is needed to install oracle instantclient or to downgrade your db tools (brt* tools)...... Through :Forums I came to know that we have to downgrade the br*tools to
Could you please help me how to downgrade the Brtools.
It's urgent.
Points will be awarded .
Regards
Jan.

Hi janakiram
Now i am facing the same error which you have faced before, have you solved that issue if it so could you pls help me how to solve this
Hi All,
i am in the middle of SAP ECC 5.0 installation .In the Database instance installation at the step 29 database update statistics, system stops giving error
ERROR 2009-05-24 08:46:44
CJS-00288 Could not update database statistics.
DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPDB5 returned 3.
SOLUTION: See brconnect.log for details.
when i checked in brconnect.log i found below error message
BR0801I BRCONNECT 7.00 (16)
BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
BR0310E Connect to database instance DB5 failed
BR0280I BRCONNECT time stamp: 2009-05-24 08.46.44
BR0804I BRCONNECT terminated with errors
Q))Which oracle version are you using since BRTOOLS 7.0 is designed to work with Oracle 10g?
If you are using an oracle 9.2.* it is needed to install oracle instant client or to downgrade your db tools (brt* tools)...... Through :Forums I came to know that we have to downgrade the br*tools to
Could you please help me how to downgrade the Brtools or could you please suggest me how to proceed
please help me
Thanks
Senthil

"Could not find database!"

I installed an air package with embedded data on an XP
machine and got the message:
"Could not find database!"
Sure enough, it couldn't. I build the package on an OSX
machine, where it works fine, and simply dragged it to a windows
share accessible by the PC. My understanding was that the build
process was platform agnostic, but could I have been wrong? Trivial
tests without a database worked fine previously.
Thanks, Al

I installed an air package with embedded data on an XP
machine and got the message:
"Could not find database!"
Sure enough, it couldn't. I build the package on an OSX
machine, where it works fine, and simply dragged it to a windows
share accessible by the PC. My understanding was that the build
process was platform agnostic, but could I have been wrong? Trivial
tests without a database worked fine previously.
Thanks, Al

Could not update database error while installation

Hi i am in the middle of 4.7 installation (IDES). At the step 29 database update statistics, system stops giving error
ERROR 2008-04-30 09:10:35
CJS-00288 Could not update database statistics.
<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPP47 returned
3.<br>SOLUTION: See brconnect.log for details.
Can anybody tell what could be the problem.
Thanks in advance

Hi
Thanks for your reply. Following are the details of file brconnect.log:
BR0801I BRCONNECT 7.00 (16)
BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
BR0310E Connect to database instance P47 failed
BR0280I BRCONNECT time stamp: 2008-04-30 09.10.35
BR0804I BRCONNECT terminated with errors

After using migration assistant to a new Mac 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

After using migration assistant to my new MacBook Retina 10.9.5, Outlook failed to open...mssge "Could not rebuild database -18000"

See if this previous discussion/link to microsoft support helps
Re: There is a problem with the Outlook database. Your database could not be rebuilt. [-18000]

Regarding ORA-01102 ORACLE COULD NOT MOUNT DATABASE IN EXCLUSIVE MODE.

Hellow Friends,
I was testing my recovery strategy for control file. Out of two my control files I deleted one and tried to start when oracle gave me error that could not find so and so file in such and such location. I than copied first member which is in other location to the deleted file location. Since than I could not start my database gving me same error ORA-01102.
Yes I can recreate control file because I am having all my other files intact.
Now is there anybody who share knowledge with me to feel me pride of such honour.
Thanks All.
Your Friend.
Sumeet.

Hi all
On this - it had me vexed for a while, I was installing
8.1.7 on Solaris 2.9 - but when I went to prep the db,
kept on getting the error 01102.
Found out that if I shut down the db (immediate),
changed the 'remote_password' param to shared then went back in to svrmgr - reshut the database and redid startup pfile=$ORACLE_HOME/etc it cured the problem.
Suspect this is a hangover from 7, when Oracle kept enforcing defaults on setting up dbs, bit like their catalog and catproc scripts, they still have errors that were there in the
year dot.
Cheers

DLL is used to open MS Access Database file, worked outside TestStand, and could not open Database file in TestStand

I created a dll using VC++ to open/read MS Access Database file. The dll works when running outside TestStand, When I used the dll in TestStand, the MS Acces Database file could not open.

To Steve1 -
Some questions that come to mind to help with solving this are:
1) Are you using any ActiveX control components to assist you in accessing the database?
2) Are you using ADO or DAO or ODBC to access your data?
3) When you called the DLL successfully outside of TestStand, what was the OI written in?
4) Since you own the source code, what is the error or exception that is thrown and on what ADO or DAO function call does it fail?
Scott Richardson (NI)
Scott Richardson
National Instruments

Could not mount database (hr=0x80004005,ec=1108)

Hi
I know this question has been asked before but my issue is different..
Exchange 2013 SP1 on Server 2012 R2
Was in process of migration from Exchange 2010 SP3 to Exchange 2013 SP1
Mail DB on d:\
Log Files on E:\
Since Migration was going....... No backups... :(
my Logfiles HDD crashed and not the database is not mounting... getting error
(hr=0x80004005,ec=1108)
Following is the output of mount database
Mount-Database -Identity maildb2013ex01
Failed to mount database "maildb2013ex01". Error: An Active Manager operation failed. Error: The database action
failed. Error: Operation failed with message: MapiExceptionDatabaseError: Unable to mount database. (hr=0x80004005,ec=1108)
Diagnostic context:
    Lid: 65256
    Lid: 10722   StoreEc: 0x454
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45120   dwParam: 0x1D7050
    Lid: 57728   dwParam: 0x1D710C
    Lid: 53632   dwParam: 0x1D7244
    Lid: 61824   dwParam: 0x1D7244
    Lid: 46144   dwParam: 0x1D7244
    Lid: 34880   dwParam: 0x1D7293
    Lid: 34760   StoreEc: 0xFFFFFDDA
    Lid: 41344   Guid: 90bc4584-670e-4231-beb8-372cc68a87fa
    Lid: 35200   dwParam: 0x2388
    Lid: 46144   dwParam: 0x1D75EE
    Lid: 34880   dwParam: 0x1D75EE
    Lid: 54472   StoreEc: 0x1388
    Lid: 42184   StoreEc: 0x454
    Lid: 1750    ---- Remote Context End ----
    Lid: 1047    StoreEc: 0x454      [Database: MailDB2013EX01, Server: Exchange01.local.saisystems.com]
    + CategoryInfo          : InvalidOperation: (MailDB2013EX01:ADObjectId) [Mount-Database], InvalidOperationExcep
   tion
    + FullyQualifiedErrorId : [Server=EX01,RequestId=cf57b110-08c1-4808-b773-a7f7f50d7dbf,TimeStamp=7/6/2014 8:3
   9:29 AM] [FailureCategory=Cmdlet-InvalidOperationException] AA4B49BB,Microsoft.Exchange.Management.SystemConfigura
tionTasks.MountDatabase
    + PSComputerName        : ex01.local.domain.com
Following is output of essutil
eseutil /mh "D:\MailStore\MailDB\MailDB2013EX01.edb"
Extensible Storage Engine Utilities for Microsoft(R) Exchange Server
Version 15.00
Copyright (C) Microsoft Corporation. All Rights Reserved.
Initiating FILE DUMP mode...
         Database: D:\MailStore\MailDB\MailDB2013EX01.edb
DATABASE HEADER:
Checksum Information:
Expected Checksum: 0xe52a9911
Actual Checksum: 0xe52a9911
Fields:
        File Type: Database
         Checksum: 0xe52a9911
   Format ulMagic: 0x89abcdef
   Engine ulMagic: 0x89abcdef
Format ulVersion: 0x620,20
Engine ulVersion: 0x620,20
Created ulVersion: 0x620,20
     DB Signature: Create time:05/03/2014 14:34:31.599 Rand:3476067128 Computer:
         cbDbPage: 32768
           dbtime: 75195 (0x125bb)
            State: Dirty Shutdown
     Log Required: 370149-370261 (0x5a5e5-0x5a655)
    Log Committed: 0-370262 (0x0-0x5a656)
   Log Recovering: 370262 (0x5a656)
GenMax Creation: 07/05/2014 20:08:06.321
         Shadowed: Yes
       Last Objid: 446
     Scrub Dbtime: 0 (0x0)
       Scrub Date: 00/00/1900 00:00:00
     Repair Count: 0
      Repair Date: 00/00/1900 00:00:00.000
Old Repair Count: 0
Last Consistent: (0x3D,32,2D7) 05/04/2014 03:13:28.088
      Last Attach: (0x3E,2,268) 05/04/2014 03:14:06.633
      Last Detach: (0x0,0,0) 00/00/1900 00:00:00.000
    Last ReAttach: (0x5A651,2,0) 07/05/2014 20:07:29.961
             Dbid: 1
    Log Signature: Create time:05/03/2014 14:34:31.505 Rand:657597575 Computer:
       OS Version: (6.2.9200 SP 0 NLS ffffffff.ffffffff)
Previous Full Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Incremental Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Copy Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Previous Differential Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Current Full Backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
Current Shadow copy backup:
        Log Gen: 0-0 (0x0-0x0)
           Mark: (0x0,0,0)
           Mark: 00/00/1900 00:00:00.000
     cpgUpgrade55Format: 0
    cpgUpgradeFreePages: 0
cpgUpgradeSpaceMapPages: 0
       ECC Fix Success Count: none
   Old ECC Fix Success Count: none
         ECC Fix Error Count: none
     Old ECC Fix Error Count: none
    Bad Checksum Error Count: none
Old bad Checksum Error Count: none
Last checksum finish Date: 00/00/1900 00:00:00.000
Current checksum start Date: 00/00/1900 00:00:00.000
      Current checksum page: 0
Operation completed successfully in 1.16 seconds.
The DB Size id 300GB, right now copying it to separate location
Can someone enlighten me what next is to be done or how can I mount this DB without log files...
will it mount without Logfiles???
Thanks
Bikram
bikram

Hi,
According to your description, your problematic database is in dirty shutdown state and your soft repair ends with errors. In this case, I'd like to say, the dirty shutdown state may be caused by that the required log files are missing. Thus, I recommend
you try the hard recovery by using Eseutil /p or
Eseutil /d /r.http://support.microsoft.com/kb/259851/en-us
Thanks,
Angela Shi
TechNet Community Support

Sometimes could not view Database job icon in Jobs page

In dev Tidal with admin access, sometimes the 'Database job' is missing on the main 'Jobs' page. Like the one below is missing the icon:
So the job details are not appearing.
This is happening in Windows 7 and in Windows XP no issues. The version of Tidal client is 5.3.1.
Could some one let me know what needs to be done to fix this issue?
Thank you.

Copied the client folder contents to a new folder(DEV) inside of Client and changed the properties of the Tidal client to reflect it:
"C:\Program Files (x86)\TIDAL\Scheduler\Client\DEV"
This seems to be working now.

Could not startup database because of controlfile

Hi, all
I have an oracle 10.1.0.2 running on Redhat Linux E3.
I tried these steps to startup the database but failed.
[oracle@flulinux01 bdump]$ export $ORACLE_SID=+ASM
[oracle@flulinux01 bdump]$ sqlplus "/as sysdba"
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Jan 22 11:04:16 2008
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 268435456 bytes
Fixed Size 778416 bytes
Variable Size 161750864 bytes
Database Buffers 104857600 bytes
Redo Buffers 1048576 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
SQL>
I exported the $ORACLE_SID=orcl10g, and the result was the same.
The alert file is like this:
$ORACLE_HOME/dbs/alert_orcl10g.log
Tue Jan 22 09:06:24 2008
Running with 1 strand for Non-Enterprise Edition
Tue Jan 22 09:06:24 2008
Running without dynamic strand for Non-Enterprise Edition
Tue Jan 22 10:01:37 2008
Running with 1 strand for Non-Enterprise Edition
Tue Jan 22 10:01:37 2008
Running without dynamic strand for Non-Enterprise Edition
Tue Jan 22 11:04:19 2008
Running with 1 strand for Non-Enterprise Edition
Tue Jan 22 11:04:19 2008
Running without dynamic strand for Non-Enterprise Edition
And I tried perform these:
SQL> select * from v$asm_disk;
no rows selected
SQL> select * from v$asm_diskgroup;
no rows selected
It seems the ASM doesn't work, and the control files are in the ASM disk group. Is that the reason? The initorcl10g.ora is like this:
[root@flulinux01 dbs]# more initorcl10g.ora
processes=250
shared_pool_size=100663296
large_pool_size=8388608
java_pool_size=50331648
sga_target=268435456
#spfile='+DATADG/orcl10g/spfileorcl10g.ora'
control_files=(+DATADG/orcl10g/control01.ctl, DATADG/orcl10g/control02.ctl, DA
TADG/orcl10g/control03.ctl)
db_block_size=8192
db_cache_size=25165824
compatible=10.1.0.2.0
log_archive_dest_1='LOCATION=+RECOVERDG/orcl10g/'
log_archive_format=%t_%s_%r.dbf
db_file_multiblock_read_count=16
db_recovery_file_dest='+RECOVERDG'
db_recovery_file_dest_size=96758398976
undo_management=AUTO
undo_tablespace=UNDOTBS1
remote_login_passwordfile=EXCLUSIVE
#db_domain=world
dispatchers='(PROTOCOL=TCP)(SERVICE=orcl10gXDB)'
job_queue_processes=10
background_dump_dest=/opt/oracle/admin/orcl10g/bdump
user_dump_dest=/opt/oracle/admin/orcl10g/udump
core_dump_dest=/opt/oracle/admin/orcl10g/cdump
sort_area_size=65536
db_name=orcl10g
open_cursors=300
pga_aggregate_target=805306368
How to start it up? Any advice is highly appreciated!
Qian

Ops..... You are right!
[root@flulinux01 db_1]# ps -ef |grep pmon
oracle 23938 1 0 14:49 ? 00:00:00 asm_pmon_+ASM
root 23956 13312 0 14:49 pts/0 00:00:00 grep pmon
[oracle@flulinux01 bdump]$ export ORACLE_SID=+ASM
[oracle@flulinux01 bdump]$ sqlplus "/as sysdba"
SQL*Plus: Release 10.1.0.2.0 - Production on Tue Jan 22 14:48:43 2008
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to an idle instance.
SQL> select * from v$asm_disk;
select * from v$asm_disk
ERROR at line 1:
ORA-01034: ORACLE not available
SQL> startup
ASM instance started
Total System Global Area 100663296 bytes
Fixed Size 777616 bytes
Variable Size 99885680 bytes
Database Buffers 0 bytes
Redo Buffers 0 bytes
ASM diskgroups mounted
SQL>
Now the +ASM disks are mounted...

Connection test to database failed: could not connect to server

I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.

I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks!

Could not find the Database Engine startup handle.

Why can't Microsoft make software that "Just Works" any more.
This is Sooooo frustrating! I'm a developer. I want to write database software and I'd like to use SQL Server. But I can't even get the damn thing to install on a fresh Windows 8.1 installation.
MySQL - installs no problem - it just works.
Oracle - Installs no problem - It just works.
I downloaded SQL Server 2012 Express with SP1, ran the Install, took most of the defaults, and I get:
Install Failed:
The following error has occurred:
Could not find the Database Engine startup handle.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254025
Of course, clicking on the link takes me to a non existing web page - what else? Just incompetence everywhere. This is Microsoft's own operating system yet they can't even get their own database to install while their competitors can.
How can they let this happen!
Then I googled the above error message. - Hundreds of hits and a lot of them are threads in forums and lots of civilians saying "try this try that" none of which works. Not a single Microsoft Employee to be found in any of the
discussions or answers. And this same problem has been happening since 2008! Yet Microsoft can't be bothered to fix it.
This kind of buggy software shouldn't have made it past Alpha testing.
Come on Microsoft, you just have to try harder. I can understand bugs that happen in unusual circumstances, after all I'm a developer too. But this won't even install on a clean Windows 8. It's tantamount to releasing a "Hello
World" program that crashes on startup!

Hi Bob,
If you make sure all your hardware and software requirements are met for installation of SQL Server 2012 on window 8.1 Its highly unlikely you will face issue.I can understand your situation so let me help you.As Kalman pointed can you paste output
of setup log file which was generated due to failed installation using Kalman's link.
Did you went thorugh below link
How to install SQL server on Win 8.1
Hardware and software requirements for SQL Server 2012
Please first read above links understand how it works and then proceed
Regarding startup handle error .AFAIK its because of Account with which you are trying to install SQL server somehow is not able to start it up after installation.Basically a righst issue.Can be different in some cases.Now whenever you install SQL server
alsway RK on Setup file and select run as administrator.When you reach page window where you need to select startup account for SQL Server please select NT Authority\System( or local system account) .
Details with steps
http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Could not find log sequence

Hi guys,
as I am still new to RMAN I would be greatfull to You for some help and guidance here.
I am cloning database with RMAN duplicate database command and at the and of the script I got RMAN-06055: could not find log sequence 86362 thread 1 .
The script is :
RMAN> RUN {
2>   allocate channel t1 type 'SBT_TAPE';
3>   ALLOCATE AUXILIARY CHANNEL aux1 type 'SBT_TAPE';
4>   ALLOCATE AUXILIARY CHANNEL aux2 type 'SBT_TAPE';
5>   send 'NSR_ENV=(NSR_SERVER=servername,NSR_CLIENT=clientname)';
6>   SET UNTIL TIME "to_date( '25.03.2008 08:00:00','dd.mm.yyyy hh24:mi:ss')";
7>   DUPLICATE TARGET DATABASE TO GMIGR3
8>     DB_FILE_NAME_CONVERT =('/lun0/prod/','/u01/lun0/gmigr3/'
9>                            '/lun1/prod/','/u01/lun0/gmigr3/'
10>                            '/lun2/prod/','/u01/lun0/gmigr3/'
11>                            '/lun3/prod/','/u01/lun0/gmigr3/'
12>                            '/lun4/prod/','/u01/lun0/gmigr3/'
13>                           )
14>     PFILE = '?/dbs/initGMIGR3.ora'
15>     LOGFILE
16>        GROUP 1 ('/u01/lun0/gmigr3/log1a.dbf', '/u01/lun0/gmigr3/log1b.dbf') SIZE 100M,
17>        GROUP 2 ('/u01/lun0/gmigr3/log2a.dbf', '/u01/lun0/gmigr3/log2b.dbf') SIZE 100M,
18>        GROUP 3 ('/u01/lun0/gmigr3/log3a.dbf', '/u01/lun0/gmigr3/log3b.dbf') SIZE 100M,
19>        GROUP 4 ('/u01/lun0/gmigr3/log4a.dbf', '/u01/lun0/gmigr3/log4b.dbf') SIZE 100M,
20>        GROUP 5 ('/u01/lun0/gmigr3/log5a.dbf', '/u01/lun0/gmigr3/log5b.dbf') SIZE 100M REUSE
21>    ;
22>    release channel aux1;
23>    release channel aux2;
24>    release channel t1;and here is the log,
so what would be your advice on this :
allocated channel: t1
channel t1: sid=1339 devtype=SBT_TAPE
channel t1: NMO v4.5.0.0
allocated channel: aux1
channel aux1: sid=870 devtype=SBT_TAPE
channel aux1: NMO v4.5.0.0
allocated channel: aux2
channel aux2: sid=872 devtype=SBT_TAPE
channel aux2: NMO v4.5.0.0
sent command to channel: t1
sent command to channel: aux1
sent command to channel: aux2
executing command: SET until clause
Starting Duplicate Db at 25-MAR-08
contents of Memory Script:
   set until scn 8177337546005;
   set newname for datafile 1 to
"/u01/lun0/hanfa2/system01.dbf";
   set newname for datafile 2 to
"/u01/lun0/hanfa2/system02.dbf";
   set newname for datafile 3 to
"/u01/lun0/hanfa2/system03.dbf";
   set newname for datafile 4 to
"/u01/lun0/hanfa2/system04.dbf";
   set newname for datafile 5 to
"/u01/lun0/hanfa2/system05.dbf";
   set newname for datafile 6 to
"/u01/lun0/hanfa2/ctxd01.dbf";
   set newname for datafile 7 to
"/u01/lun0/hanfa2/owad01.dbf";
   set newname for datafile 8 to
"/u01/lun0/hanfa2/a_queue02.dbf";
   set newname for datafile 9 to
"/u01/lun0/hanfa2/odm.dbf";
   set newname for datafile 10 to
"/u01/lun0/hanfa2/olap.dbf";
   set newname for datafile 11 to
"/u01/lun0/hanfa2/xxcounter03.dbf";
   set newname for datafile 12 to
"/u01/lun0/hanfa2/xxcounter02.dbf";
   set newname for datafile 13 to
"/u01/lun0/hanfa2/xxcounter01.dbf";
   set newname for datafile 14 to
"/u01/lun0/hanfa2/sysaux01.dbf";
   set newname for datafile 15 to
"/u01/lun0/hanfa2/system12.dbf";
   set newname for datafile 16 to
"/u01/lun0/hanfa2/undo06.dbf";
   set newname for datafile 17 to
"/u01/lun0/hanfa2/disco01.dbf";
   set newname for datafile 18 to
"/u01/lun0/hanfa2/disco02.dbf";
   set newname for datafile 19 to
"/u01/lun0/hanfa2/disco03.dbf";
   set newname for datafile 20 to
"/u01/lun0/hanfa2/a_conv01.dbf";
   set newname for datafile 21 to
"/u01/lun0/hanfa2/a_conv02.dbf";
   set newname for datafile 22 to
"/u01/lun0/hanfa2/a_conv03.dbf";
   set newname for datafile 23 to
"/u01/lun0/hanfa2/a_conv04.dbf";
   set newname for datafile 24 to
"/u01/lun0/hanfa2/a_int02.dbf";
   set newname for datafile 25 to
"/u01/lun0/hanfa2/tools.dbf";
   set newname for datafile 26 to
"/u01/lun0/hanfa2/a_txn_data04.dbf";
   set newname for datafile 27 to
"/u01/lun0/hanfa2/a_txn_ind06.dbf";
   set newname for datafile 28 to
"/u01/lun0/hanfa2/undo05.dbf";
   set newname for datafile 29 to
"/u01/lun0/hanfa2/undo04.dbf";
   set newname for datafile 30 to
"/u01/lun0/hanfa2/undo03.dbf";
   set newname for datafile 31 to
"/u01/lun0/hanfa2/undo02.dbf";
   set newname for datafile 32 to
"/u01/lun0/hanfa2/undo01.dbf";
   set newname for datafile 33 to
"/u01/lun0/hanfa2/a_ts_mview03.dbf";
   set newname for datafile 34 to
"/u01/lun0/hanfa2/a_ts_mview02.dbf";
   set newname for datafile 35 to
"/u01/lun0/hanfa2/a_ts_mview01.dbf";
   set newname for datafile 36 to
"/u01/lun0/hanfa2/foglight_ts.dbf";
   set newname for datafile 37 to
"/u01/lun0/hanfa2/a_txn_data05.dbf";
   set newname for datafile 38 to
"/u01/lun0/hanfa2/a_txn_data06.dbf";
   set newname for datafile 39 to
"/u01/lun0/hanfa2/a_txn_data07.dbf";
   set newname for datafile 40 to
"/u01/lun0/hanfa2/a_txn_ind07.dbf";
   set newname for datafile 41 to
"/u01/lun0/hanfa2/a_txn_ind08.dbf";
   set newname for datafile 42 to
"/u01/lun0/hanfa2/dwh01.dbf";
   set newname for datafile 43 to
"/u01/lun0/hanfa2/dwh02.dbf";
   set newname for datafile 288 to
"/u01/lun0/hanfa2/system10.dbf";
   set newname for datafile 295 to
"/u01/lun0/hanfa2/system06.dbf";
   set newname for datafile 314 to
"/u01/lun0/hanfa2/portal01.dbf";
   set newname for datafile 351 to
"/u01/lun0/hanfa2/system07.dbf";
   set newname for datafile 352 to
"/u01/lun0/hanfa2/system09.dbf";
   set newname for datafile 353 to
"/u01/lun0/hanfa2/system08.dbf";
   set newname for datafile 354 to
"/u01/lun0/hanfa2/system11.dbf";
   set newname for datafile 392 to
"/u01/lun0/hanfa2/a_txn_data01.dbf";
   set newname for datafile 393 to
"/u01/lun0/hanfa2/a_txn_ind01.dbf";
   set newname for datafile 394 to
"/u01/lun0/hanfa2/a_ref01.dbf";
   set newname for datafile 395 to
"/u01/lun0/hanfa2/a_int01.dbf";
   set newname for datafile 396 to
"/u01/lun0/hanfa2/a_summ01.dbf";
   set newname for datafile 397 to
"/u01/lun0/hanfa2/a_nolog01.dbf";
   set newname for datafile 398 to
"/u01/lun0/hanfa2/a_archive01.dbf";
   set newname for datafile 399 to
"/u01/lun0/hanfa2/a_queue01.dbf";
   set newname for datafile 400 to
"/u01/lun0/hanfa2/a_media01.dbf";
   set newname for datafile 401 to
"/u01/lun0/hanfa2/a_txn_data02.dbf";
   set newname for datafile 402 to
"/u01/lun0/hanfa2/a_txn_data03.dbf";
   set newname for datafile 403 to
"/u01/lun0/hanfa2/a_txn_ind02.dbf";
   set newname for datafile 404 to
"/u01/lun0/hanfa2/a_txn_ind03.dbf";
   set newname for datafile 405 to
"/u01/lun0/hanfa2/a_txn_ind04.dbf";
   set newname for datafile 406 to
"/u01/lun0/hanfa2/a_txn_ind05.dbf";
   set newname for datafile 407 to
"/u01/lun0/hanfa2/a_ref02.dbf";
   restore
   check readonly
   clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 25-MAR-08
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00024 to /u01/lun0/hanfa2/a_int02.dbf
restoring datafile 00402 to /u01/lun0/hanfa2/a_txn_data03.dbf
channel aux2: reading from backup piece /full_PROD_s7jc4d6g_1_1/
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00395 to /u01/lun0/hanfa2/a_int01.dbf
restoring datafile 00404 to /u01/lun0/hanfa2/a_txn_ind03.dbf
channel aux1: reading from backup piece /full_PROD_s8jc4d6g_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_s8jc4d6g_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:48:09
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00026 to /u01/lun0/hanfa2/a_txn_data04.dbf
restoring datafile 00030 to /u01/lun0/hanfa2/undo03.dbf
channel aux1: reading from backup piece /full_PROD_s9jc4ene_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_s7jc4d6g_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:59:15
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00027 to /u01/lun0/hanfa2/a_txn_ind06.dbf
restoring datafile 00401 to /u01/lun0/hanfa2/a_txn_data02.dbf
channel aux2: reading from backup piece /full_PROD_sajc4evd_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_s9jc4ene_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:25:44
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00031 to /u01/lun0/hanfa2/undo02.dbf
restoring datafile 00397 to /u01/lun0/hanfa2/a_nolog01.dbf
channel aux1: reading from backup piece /full_PROD_sbjc4fbo_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sajc4evd_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:26:55
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00039 to /u01/lun0/hanfa2/a_txn_data07.dbf
restoring datafile 00403 to /u01/lun0/hanfa2/a_txn_ind02.dbf
channel aux2: reading from backup piece /full_PROD_scjc4fkl_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sbjc4fbo_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:26:14
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00025 to /u01/lun0/hanfa2/tools.dbf
restoring datafile 00037 to /u01/lun0/hanfa2/a_txn_data05.dbf
channel aux1: reading from backup piece /full_PROD_sdjc4g03_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_scjc4fkl_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:21:14
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00028 to /u01/lun0/hanfa2/undo05.dbf
restoring datafile 00393 to /u01/lun0/hanfa2/a_txn_ind01.dbf
channel aux2: reading from backup piece /full_PROD_sejc4g5i_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sdjc4g03_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:22:02
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00032 to /u01/lun0/hanfa2/undo01.dbf
restoring datafile 00038 to /u01/lun0/hanfa2/a_txn_data06.dbf
channel aux1: reading from backup piece /full_PROD_sfjc4gf3_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sejc4g5i_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:23:13
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00352 to /u01/lun0/hanfa2/system09.dbf
restoring datafile 00392 to /u01/lun0/hanfa2/a_txn_data01.dbf
channel aux2: reading from backup piece /full_PROD_sgjc4gkj_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sfjc4gf3_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:21:12
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00400 to /u01/lun0/hanfa2/a_media01.dbf
restoring datafile 00405 to /u01/lun0/hanfa2/a_txn_ind04.dbf
channel aux1: reading from backup piece /full_PROD_shjc4gtq_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sgjc4gkj_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:16:32
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00033 to /u01/lun0/hanfa2/a_ts_mview03.dbf
restoring datafile 00406 to /u01/lun0/hanfa2/a_txn_ind05.dbf
channel aux2: reading from backup piece /full_PROD_sijc4h14_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_shjc4gtq_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:15:51
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00022 to /u01/lun0/hanfa2/a_conv03.dbf
restoring datafile 00029 to /u01/lun0/hanfa2/undo04.dbf
channel aux1: reading from backup piece /full_PROD_skjc4hcm_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sijc4h14_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:13:42
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00035 to /u01/lun0/hanfa2/a_ts_mview01.dbf
restoring datafile 00041 to /u01/lun0/hanfa2/a_txn_ind08.dbf
channel aux2: reading from backup piece /full_PROD_sjjc4h9n_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_skjc4hcm_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:12:13
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00040 to /u01/lun0/hanfa2/a_txn_ind07.dbf
restoring datafile 00353 to /u01/lun0/hanfa2/system08.dbf
channel aux1: reading from backup piece /full_PROD_sljc4hjo_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_sjjc4h9n_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:12:53
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /u01/lun0/hanfa2/system01.dbf
restoring datafile 00034 to /u01/lun0/hanfa2/a_ts_mview02.dbf
channel aux2: reading from backup piece /full_PROD_smjc4hkr_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sljc4hjo_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:10:21
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00396 to /u01/lun0/hanfa2/a_summ01.dbf
restoring datafile 00399 to /u01/lun0/hanfa2/a_queue01.dbf
channel aux1: reading from backup piece /full_PROD_sojc4hrb_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_smjc4hkr_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:08:08
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00016 to /u01/lun0/hanfa2/undo06.dbf
restoring datafile 00023 to /u01/lun0/hanfa2/a_conv04.dbf
channel aux2: reading from backup piece /full_PROD_snjc4hr8_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sojc4hrb_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:06:39
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00014 to /u01/lun0/hanfa2/sysaux01.dbf
restoring datafile 00015 to /u01/lun0/hanfa2/system12.dbf
channel aux1: reading from backup piece /full_PROD_sqjc4i1a_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_snjc4hr8_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:07:21
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00008 to /u01/lun0/hanfa2/a_queue02.dbf
restoring datafile 00394 to /u01/lun0/hanfa2/a_ref01.dbf
channel aux2: reading from backup piece /full_PROD_srjc4i49_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_sqjc4i1a_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:02:30
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00398 to /u01/lun0/hanfa2/a_archive01.dbf
restoring datafile 00407 to /u01/lun0/hanfa2/a_ref02.dbf
channel aux1: reading from backup piece /full_PROD_ssjc4i7s_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_srjc4i49_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:04:01
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00295 to /u01/lun0/hanfa2/system06.dbf
restoring datafile 00351 to /u01/lun0/hanfa2/system07.dbf
channel aux2: reading from backup piece /full_PROD_stjc4ia7_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_ssjc4i7s_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:03:51
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00042 to /u01/lun0/hanfa2/dwh01.dbf
channel aux1: reading from backup piece /full_PROD_spjc4huk_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_stjc4ia7_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:11:11
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00002 to /u01/lun0/hanfa2/system02.dbf
restoring datafile 00003 to /u01/lun0/hanfa2/system03.dbf
channel aux2: reading from backup piece /full_PROD_sujc4ics_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_spjc4huk_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:13:32
channel aux2: restored backup piece 1
piece handle=/full_PROD_sujc4ics_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:03:56
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00288 to /u01/lun0/hanfa2/system10.dbf
restoring datafile 00354 to /u01/lun0/hanfa2/system11.dbf
channel aux1: reading from backup piece /full_PROD_t0jc4if5_1_1/
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00004 to /u01/lun0/hanfa2/system04.dbf
restoring datafile 00005 to /u01/lun0/hanfa2/system05.dbf
channel aux2: reading from backup piece /full_PROD_svjc4ieu_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t0jc4if5_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:04:46
channel aux2: restored backup piece 1
piece handle=/full_PROD_svjc4ieu_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:04:46
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00020 to /u01/lun0/hanfa2/a_conv01.dbf
restoring datafile 00021 to /u01/lun0/hanfa2/a_conv02.dbf
channel aux1: reading from backup piece /full_PROD_t1jc4ihg_1_1/
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00006 to /u01/lun0/hanfa2/ctxd01.dbf
restoring datafile 00036 to /u01/lun0/hanfa2/foglight_ts.dbf
channel aux2: reading from backup piece /full_PROD_t3jc4iiu_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t1jc4ihg_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:01:45
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00013 to /u01/lun0/hanfa2/xxcounter01.dbf
restoring datafile 00018 to /u01/lun0/hanfa2/disco02.dbf
channel aux1: reading from backup piece /full_PROD_t4jc4ijd_1_1/
channel aux2: restored backup piece 1
piece handle=/full_PROD_t3jc4iiu_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:01:46
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00043 to /u01/lun0/hanfa2/dwh02.dbf
channel aux2: reading from backup piece /full_PROD_t2jc4ihh_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t4jc4ijd_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:00:36
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00009 to /u01/lun0/hanfa2/odm.dbf
restoring datafile 00314 to /u01/lun0/hanfa2/portal01.dbf
channel aux1: reading from backup piece /full_PROD_t6jc4ijs_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t6jc4ijs_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:01:16
channel aux2: restored backup piece 1
piece handle=/full_PROD_t2jc4ihh_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:01:51
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00017 to /u01/lun0/hanfa2/disco01.dbf
restoring datafile 00019 to /u01/lun0/hanfa2/disco03.dbf
channel aux1: reading from backup piece /full_PROD_t5jc4ijs_1_1/
channel aux2: starting datafile backupset restore
channel aux2: specifying datafile(s) to restore from backup set
restoring datafile 00011 to /u01/lun0/hanfa2/xxcounter03.dbf
restoring datafile 00012 to /u01/lun0/hanfa2/xxcounter02.dbf
channel aux2: reading from backup piece /full_PROD_t7jc4ik0_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t5jc4ijs_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:00:55
channel aux2: restored backup piece 1
piece handle=/full_PROD_t7jc4ik0_1_1/ tag=TAG20080325T041511
channel aux2: restore complete, elapsed time: 00:00:55
channel aux1: starting datafile backupset restore
channel aux1: specifying datafile(s) to restore from backup set
restoring datafile 00007 to /u01/lun0/hanfa2/owad01.dbf
restoring datafile 00010 to /u01/lun0/hanfa2/olap.dbf
channel aux1: reading from backup piece /full_PROD_t8jc4ik0_1_1/
channel aux1: restored backup piece 1
piece handle=/full_PROD_t8jc4ik0_1_1/ tag=TAG20080325T041511
channel aux1: restore complete, elapsed time: 00:00:45
Finished restore at 25-MAR-08
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "HANFA2" RESETLOGS ARCHIVELOG
MAXLOGFILES     32
MAXLOGMEMBERS      5
MAXDATAFILES      512
MAXINSTANCES     8
MAXLOGHISTORY     7303
LOGFILE
GROUP 1 ( '/u01/lun0/hanfa2/log1a.dbf', '/u01/lun0/hanfa2/log1b.dbf' ) SIZE 100 M ,
GROUP 2 ( '/u01/lun0/hanfa2/log2a.dbf', '/u01/lun0/hanfa2/log2b.dbf' ) SIZE 100 M ,
GROUP 3 ( '/u01/lun0/hanfa2/log3a.dbf', '/u01/lun0/hanfa2/log3b.dbf' ) SIZE 100 M ,
GROUP 4 ( '/u01/lun0/hanfa2/log4a.dbf', '/u01/lun0/hanfa2/log4b.dbf' ) SIZE 100 M ,
GROUP 5 ( '/u01/lun0/hanfa2/log5a.dbf', '/u01/lun0/hanfa2/log5b.dbf' ) SIZE 100 M REUSE
DATAFILE
'/u01/lun0/hanfa2/system01.dbf'
CHARACTER SET UTF8
contents of Memory Script:
   switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=650311810 filename=/u01/lun0/hanfa2/system02.dbf
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=650311810 filename=/u01/lun0/hanfa2/system03.dbf
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=650311810 filename=/u01/lun0/hanfa2/system04.dbf
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=650311810 filename=/u01/lun0/hanfa2/system05.dbf
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=650311810 filename=/u01/lun0/hanfa2/ctxd01.dbf
datafile 7 switched to datafile copy
input datafile copy recid=6 stamp=650311810 filename=/u01/lun0/hanfa2/owad01.dbf
datafile 8 switched to datafile copy
input datafile copy recid=7 stamp=650311810 filename=/u01/lun0/hanfa2/a_queue02.dbf
datafile 9 switched to datafile copy
input datafile copy recid=8 stamp=650311810 filename=/u01/lun0/hanfa2/odm.dbf
datafile 10 switched to datafile copy
input datafile copy recid=9 stamp=650311810 filename=/u01/lun0/hanfa2/olap.dbf
datafile 11 switched to datafile copy
input datafile copy recid=10 stamp=650311810 filename=/u01/lun0/hanfa2/xxcounter03.dbf
datafile 12 switched to datafile copy
input datafile copy recid=11 stamp=650311810 filename=/u01/lun0/hanfa2/xxcounter02.dbf
datafile 13 switched to datafile copy
input datafile copy recid=12 stamp=650311810 filename=/u01/lun0/hanfa2/xxcounter01.dbf
datafile 14 switched to datafile copy
input datafile copy recid=13 stamp=650311810 filename=/u01/lun0/hanfa2/sysaux01.dbf
datafile 15 switched to datafile copy
input datafile copy recid=14 stamp=650311810 filename=/u01/lun0/hanfa2/system12.dbf
datafile 16 switched to datafile copy
input datafile copy recid=15 stamp=650311810 filename=/u01/lun0/hanfa2/undo06.dbf
datafile 17 switched to datafile copy
input datafile copy recid=16 stamp=650311810 filename=/u01/lun0/hanfa2/disco01.dbf
datafile 18 switched to datafile copy
input datafile copy recid=17 stamp=650311810 filename=/u01/lun0/hanfa2/disco02.dbf
datafile 19 switched to datafile copy
input datafile copy recid=18 stamp=650311810 filename=/u01/lun0/hanfa2/disco03.dbf
datafile 20 switched to datafile copy
input datafile copy recid=19 stamp=650311810 filename=/u01/lun0/hanfa2/a_conv01.dbf
datafile 21 switched to datafile copy
input datafile copy recid=20 stamp=650311810 filename=/u01/lun0/hanfa2/a_conv02.dbf
datafile 22 switched to datafile copy
input datafile copy recid=21 stamp=650311810 filename=/u01/lun0/hanfa2/a_conv03.dbf
datafile 23 switched to datafile copy
input datafile copy recid=22 stamp=650311810 filename=/u01/lun0/hanfa2/a_conv04.dbf
datafile 24 switched to datafile copy
input datafile copy recid=23 stamp=650311810 filename=/u01/lun0/hanfa2/a_int02.dbf
datafile 25 switched to datafile copy
input datafile copy recid=24 stamp=650311810 filename=/u01/lun0/hanfa2/tools.dbf
datafile 26 switched to datafile copy
input datafile copy recid=25 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_data04.dbf
datafile 27 switched to datafile copy
input datafile copy recid=26 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_ind06.dbf
datafile 28 switched to datafile copy
input datafile copy recid=27 stamp=650311810 filename=/u01/lun0/hanfa2/undo05.dbf
datafile 29 switched to datafile copy
input datafile copy recid=28 stamp=650311810 filename=/u01/lun0/hanfa2/undo04.dbf
datafile 30 switched to datafile copy
input datafile copy recid=29 stamp=650311810 filename=/u01/lun0/hanfa2/undo03.dbf
datafile 31 switched to datafile copy
input datafile copy recid=30 stamp=650311810 filename=/u01/lun0/hanfa2/undo02.dbf
datafile 32 switched to datafile copy
input datafile copy recid=31 stamp=650311810 filename=/u01/lun0/hanfa2/undo01.dbf
datafile 33 switched to datafile copy
input datafile copy recid=32 stamp=650311810 filename=/u01/lun0/hanfa2/a_ts_mview03.dbf
datafile 34 switched to datafile copy
input datafile copy recid=33 stamp=650311810 filename=/u01/lun0/hanfa2/a_ts_mview02.dbf
datafile 35 switched to datafile copy
input datafile copy recid=34 stamp=650311810 filename=/u01/lun0/hanfa2/a_ts_mview01.dbf
datafile 36 switched to datafile copy
input datafile copy recid=35 stamp=650311810 filename=/u01/lun0/hanfa2/foglight_ts.dbf
datafile 37 switched to datafile copy
input datafile copy recid=36 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_data05.dbf
datafile 38 switched to datafile copy
input datafile copy recid=37 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_data06.dbf
datafile 39 switched to datafile copy
input datafile copy recid=38 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_data07.dbf
datafile 40 switched to datafile copy
input datafile copy recid=39 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_ind07.dbf
datafile 41 switched to datafile copy
input datafile copy recid=40 stamp=650311810 filename=/u01/lun0/hanfa2/a_txn_ind08.dbf
datafile 42 switched to datafile copy
input datafile copy recid=41 stamp=650311810 filename=/u01/lun0/hanfa2/dwh01.dbf
datafile 43 switched to datafile copy
input datafile copy recid=42 stamp=650311810 filename=/u01/lun0/hanfa2/dwh02.dbf
datafile 288 switched to datafile copy
input datafile copy recid=43 stamp=650311810 filename=/u01/lun0/hanfa2/system10.dbf
datafile 295 switched to datafile copy
input datafile copy recid=44 stamp=650311810 filename=/u01/lun0/hanfa2/system06.dbf
datafile 314 switched to datafile copy
input datafile copy recid=45 stamp=650311810 filename=/u01/lun0/hanfa2/portal01.dbf
datafile 351 switched to datafile copy
input datafile copy recid=46 stamp=650311810 filename=/u01/lun0/hanfa2/system07.dbf
datafile 352 switched to datafile copy
input datafile copy recid=47 stamp=650311811 filename=/u01/lun0/hanfa2/system09.dbf
datafile 353 switched to datafile copy
input datafile copy recid=48 stamp=650311811 filename=/u01/lun0/hanfa2/system08.dbf
datafile 354 switched to datafile copy
input datafile copy recid=49 stamp=650311811 filename=/u01/lun0/hanfa2/system11.dbf
datafile 392 switched to datafile copy
input datafile copy recid=50 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_data01.dbf
datafile 393 switched to datafile copy
input datafile copy recid=51 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind01.dbf
datafile 394 switched to datafile copy
input datafile copy recid=52 stamp=650311811 filename=/u01/lun0/hanfa2/a_ref01.dbf
datafile 395 switched to datafile copy
input datafile copy recid=53 stamp=650311811 filename=/u01/lun0/hanfa2/a_int01.dbf
datafile 396 switched to datafile copy
input datafile copy recid=54 stamp=650311811 filename=/u01/lun0/hanfa2/a_summ01.dbf
datafile 397 switched to datafile copy
input datafile copy recid=55 stamp=650311811 filename=/u01/lun0/hanfa2/a_nolog01.dbf
datafile 398 switched to datafile copy
input datafile copy recid=56 stamp=650311811 filename=/u01/lun0/hanfa2/a_archive01.dbf
datafile 399 switched to datafile copy
input datafile copy recid=57 stamp=650311811 filename=/u01/lun0/hanfa2/a_queue01.dbf
datafile 400 switched to datafile copy
input datafile copy recid=58 stamp=650311811 filename=/u01/lun0/hanfa2/a_media01.dbf
datafile 401 switched to datafile copy
input datafile copy recid=59 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_data02.dbf
datafile 402 switched to datafile copy
input datafile copy recid=60 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_data03.dbf
datafile 403 switched to datafile copy
input datafile copy recid=61 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind02.dbf
datafile 404 switched to datafile copy
input datafile copy recid=62 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind03.dbf
datafile 405 switched to datafile copy
input datafile copy recid=63 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind04.dbf
datafile 406 switched to datafile copy
input datafile copy recid=64 stamp=650311811 filename=/u01/lun0/hanfa2/a_txn_ind05.dbf
datafile 407 switched to datafile copy
input datafile copy recid=65 stamp=650311811 filename=/u01/lun0/hanfa2/a_ref02.dbf
contents of Memory Script:
   set until time "to_date( '25.03.2008 08:00:00','dd.mm.yyyy hh24:mi:ss')";
   recover
   clone database
    delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 25-MAR-08
starting media recovery
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86375
channel aux1: restoring archive log
archive log thread=1 sequence=86376
channel aux1: restoring archive log
archive log thread=1 sequence=86377
channel aux1: restoring archive log
archive log thread=1 sequence=86378
channel aux1: restoring archive log
archive log thread=1 sequence=86379
channel aux1: restoring archive log
archive log thread=1 sequence=86380
channel aux1: restoring archive log
archive log thread=1 sequence=86381
channel aux1: restoring archive log
archive log thread=1 sequence=86382
channel aux1: restoring archive log
archive log thread=1 sequence=86383
channel aux1: restoring archive log
archive log thread=1 sequence=86384
channel aux1: restoring archive log
archive log thread=1 sequence=86385
channel aux1: restoring archive log
archive log thread=1 sequence=86386
channel aux1: restoring archive log
archive log thread=1 sequence=86387
channel aux1: restoring archive log
archive log thread=1 sequence=86388
channel aux1: restoring archive log
archive log thread=1 sequence=86389
channel aux1: restoring archive log
archive log thread=1 sequence=86390
channel aux1: restoring archive log
archive log thread=1 sequence=86391
channel aux1: restoring archive log
archive log thread=1 sequence=86392
channel aux1: restoring archive log
archive log thread=1 sequence=86393
channel aux1: restoring archive log
archive log thread=1 sequence=86394
channel aux1: restoring archive log
archive log thread=1 sequence=86395
channel aux1: restoring archive log
archive log thread=1 sequence=86396
channel aux1: restoring archive log
archive log thread=1 sequence=86397
channel aux1: restoring archive log
archive log thread=1 sequence=86398
channel aux1: reading from backup piece /arch1_PROD_tdjc4jd7/
channel aux1: restored backup piece 1
piece handle=/arch1_PROD_tdjc4jd7/ tag=TAG20080325T060110
channel aux1: restore complete, elapsed time: 00:07:36
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86356
channel aux1: restoring archive log
archive log thread=1 sequence=86357
channel aux1: restoring archive log
archive log thread=1 sequence=86358
channel aux1: restoring archive log
archive log thread=1 sequence=86359
channel aux1: restoring archive log
archive log thread=1 sequence=86360
channel aux1: restoring archive log
archive log thread=1 sequence=86361
channel aux1: restoring archive log
archive log thread=1 sequence=86362
channel aux1: restoring archive log
archive log thread=1 sequence=86363
channel aux1: restoring archive log
archive log thread=1 sequence=86364
channel aux1: restoring archive log
archive log thread=1 sequence=86365
channel aux1: restoring archive log
archive log thread=1 sequence=86366
channel aux1: restoring archive log
archive log thread=1 sequence=86367
channel aux1: restoring archive log
archive log thread=1 sequence=86368
channel aux1: restoring archive log
archive log thread=1 sequence=86369
channel aux1: restoring archive log
archive log thread=1 sequence=86370
channel aux1: restoring archive log
archive log thread=1 sequence=86371
channel aux1: restoring archive log
archive log thread=1 sequence=86372
channel aux1: restoring archive log
archive log thread=1 sequence=86373
channel aux1: restoring archive log
archive log thread=1 sequence=86374
channel aux1: reading from backup piece /arch1_PROD_tcjc4jd7/
ORA-19870: error reading backup piece /arch1_PROD_tcjc4jd7/
ORA-19510: failed to set size of 182123 blocks for file "/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86358.log" (blocksize=512)
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 9
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86399
channel aux1: restoring archive log
archive log thread=1 sequence=86400
channel aux1: restoring archive log
archive log thread=1 sequence=86401
channel aux1: restoring archive log
archive log thread=1 sequence=86402
channel aux1: restoring archive log
archive log thread=1 sequence=86403
channel aux1: restoring archive log
archive log thread=1 sequence=86404
channel aux1: reading from backup piece /arch1_PROD_tgjc4qf4/
channel aux2: starting archive log restore to default destination
channel aux2: restoring archive log
archive log thread=1 sequence=86356
channel aux2: restoring archive log
archive log thread=1 sequence=86357
channel aux2: restoring archive log
archive log thread=1 sequence=86358
channel aux2: restoring archive log
archive log thread=1 sequence=86359
channel aux2: restoring archive log
archive log thread=1 sequence=86360
channel aux2: restoring archive log
archive log thread=1 sequence=86361
channel aux2: restoring archive log
archive log thread=1 sequence=86363
channel aux2: restoring archive log
archive log thread=1 sequence=86364
channel aux2: restoring archive log
archive log thread=1 sequence=86365
channel aux2: restoring archive log
archive log thread=1 sequence=86366
channel aux2: restoring archive log
archive log thread=1 sequence=86367
channel aux2: restoring archive log
archive log thread=1 sequence=86368
channel aux2: restoring archive log
archive log thread=1 sequence=86369
channel aux2: restoring archive log
archive log thread=1 sequence=86370
channel aux2: restoring archive log
archive log thread=1 sequence=86371
channel aux2: restoring archive log
archive log thread=1 sequence=86372
channel aux2: restoring archive log
archive log thread=1 sequence=86373
channel aux2: restoring archive log
archive log thread=1 sequence=86374
channel aux2: reading from backup piece /arch1_PROD_t9jc4iki/
channel aux1: restored backup piece 1
piece handle=/arch1_PROD_tgjc4qf4/ tag=TAG20080325T080139
channel aux1: restore complete, elapsed time: 00:01:56
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86405
channel aux1: restoring archive log
archive log thread=1 sequence=86406
channel aux1: restoring archive log
archive log thread=1 sequence=86407
channel aux1: restoring archive log
archive log thread=1 sequence=86408
channel aux1: reading from backup piece /arch1_PROD_tfjc4qf4/
channel aux1: restored backup piece 1
piece handle=/arch1_PROD_tfjc4qf4/ tag=TAG20080325T080139
channel aux1: restore complete, elapsed time: 00:02:05
channel aux1: starting archive log restore to default destination
channel aux1: restoring archive log
archive log thread=1 sequence=86409
channel aux1: reading from backup piece /arch1_PROD_tkjc51fm/
channel aux1: restored backup piece 1
piece handle=/arch1_PROD_tkjc51fm/ tag=TAG20080325T100124
channel aux1: restore complete, elapsed time: 00:02:15
channel aux2: restored backup piece 1
piece handle=/arch1_PROD_t9jc4iki/ tag=TAG20080325T054759
channel aux2: restore complete, elapsed time: 00:12:10
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86356.log thread=1 sequence=86356
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86356.log recid=44 stamp=650313112
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86357.log thread=1 sequence=86357
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86357.log recid=45 stamp=650313112
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86358.log thread=1 sequence=86358
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86358.log recid=37 stamp=650313085
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86359.log thread=1 sequence=86359
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86359.log recid=38 stamp=650313085
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86360.log thread=1 sequence=86360
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86360.log recid=52 stamp=650313135
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86361.log thread=1 sequence=86361
channel clone_default: deleting archive log(s)
archive log filename=/u01/lun0/hanfa2/arch/prodarch_23b63f7_1_625608313_86361.log recid=40 stamp=650313085
unable to find archive log
archive log thread=1 sequence=86362
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u01/lun0/hanfa2/system01.dbf'
released channel: t1
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/25/2008 18:32:26
RMAN-03015: error occurred in stored script Memory Script
RMAN-06055: could not find log sequence 86362 thread 1
Recovery Manager complete.

Yes :-).
Also when i run recover database using backup controlfile;and try to apply redo logs i am getting:ORA-00309: log belongs to wrong database Do you have any advice on this ?

RMAN-06031: could not translate database keyword

Similar Messages

Maybe you are looking for