Rman connect auxiliary displays wrong database
I am trying to use the new 11g duplicate from active database feature. I am running into the following error and can't figure out what is wrong.
RMAN> connect target sys/xxxxx@ebsprod
connected to target database: EBSPROD (DBID=3420264532)
RMAN> connect auxiliary sys/xxxxx@abc
connected to auxiliary database: EBSPROD (not mounted)
RMAN>
The auxiliary database shows the same DB name as the target. The correct auxiliary name is ABC in this case. The DB is started in nomount with the correct name. The new init.ora is correct as well. What is it looking at? Any help would be greatly appreciated.
The correct auxiliary name is ABC in this case. The DB is started in nomount with the correct name. The new init.ora is correct as well.show us the requested db_name parameter, init.ora and tnsnames.ora
RMAN displays the value of db_name
db_unique_name and instance_name doesnt matter here
Similar Messages
-
DUPLICATE DB : ORA-17629: Cannot connect to the remote database server
[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database serverWelcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112 -
CONNECT AUXILIARY failing (db names confusion)
Hello,
For the purpose of creating Physical standby Database, I am having connect to AUXILIARY DB issue. I think I am confused between PRIMARY and STANDBY DB names. Please have a look at the configuration and suggest where I am doing mistake.
Thanks a lot.
# Primary
SQL> select name,db_unique_name from v$database;
NAME DB_UNIQUE_NAME
JOHN JOHN
SQL> select * from global_name;
GLOBAL_NAME
JOHN
TNSNAMES.ORA entries on both primary and standby looks like this:
JOHN=
(DESCRIPTION = - - -
JOHN_DB2
(DESCRIPTION = - -
TNSPING JOHN
TNSPING JOHN_DB2 are working fine. e.g. from Primary when I do this it return OK (10 msec) . . .
LISTENER.ORA on both have static entries: e.g. on AUXILIARY listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = john_db2)
(ORACLE_HOME = /oracle/app/oracle/11g)
(SID_NAME = john)
lsnrctl stop and start returned no errors.
Here is the error I am concerned: From Standby I tried to connect:
RMAN> CONNECT TARGET sys/oracle@JOHN;
connected to target database: JOHN (DBID=1279980307)
RMAN> CONNECT AUXILIARY sys/oracle@JOHN_DB2;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04006: error from auxiliary database: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
I want to select JOHN_DB2 to for Standby database (at least to differentiate between the two), but I don't know how RMAN recognises the CONNECT IDENTIFIER of the AUXILIARY DB which is not yet replicated/created?
db_name,db_unique_name,instance_name on both are same, i.e. JOHN. I just queries v$parameter on Auxiliary.
Please suggest.
Best RegardsHi john,
The listener.ora contents should be like below. ie both primary and standby listerner.ora should have the static entry like below
SID_LIST_LISTENER =
(SID_LIST=
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME=/opt/app/oracle/product/11.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC=
(GLOBAL_DBNAME=DB01SBY1)
(ORACLE_HOME=/opt/app/oracle/product/11.2.0/db_1)
(SID_NAME=DB01SBY1)
ADR_BASE_LISTENER = /opt/app/oracle
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =<host_name>)(PORT = 1521))
Kindly post both full listener.ora contents and tnsnames.ora contents in both primary and standby environment.
Regards,
Pradeep. V -
I can´t recreate my physical standby.
It worked in the past.
Now I reinstalled the 3 standbyclients.
Copied the spfile from the primary - modified the entries and did a rman backup.
But when issuing the duplicate database command - it comes up with the error above
SPFILE standyby db:
*.db_file_name_convert='+DATA/prim/','+DATA/stdy/','+RECOVERY/prim','+RECOVERY/stdy'
*.log_file_name_convert='+DATA/prim/','+DATA/stdy/','+RECOVERY/prim','+RECOVERY/stdy'
Starting restore at 15-APR-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle/stage/33lb65n2_1_1
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/oracle/stage/33lb65n2_1_1 tag=TAG20100415T102434
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:11
output filename=+REDO1/stdy/controlfile/current.262.716293055
output filename=+REDO2/stdy/controlfile/backup.262.716293055
Finished restore at 15-APR-10
sql statement: alter database mount standby database
released channel: ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/15/2010 10:31:46
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename DATA/prim/datafile/system.262.715097535 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/sysaux.263.715097499 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs3.269.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs2.270.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/example.272.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/users.268.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/sysaux.273.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs1.271.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/system.264.710521021 conflicts with a file used by the target database+Hi ,
I feel you are using ASM but still check the below details:
Cause
Production and Auxiliary have same directory structure and are running on two different machines. RMAN must be told not check that the target datafiles are sharing the same names as the duplicated files being created. Otherwise, the following errors will be returned:
RMAN-05001: auxiliary filename /qmaxnt/u04/qmaxntorafiles/table/QMAXAD08_03.dbf
conflicts with a file used by the target database
RMAN-05001: auxiliary filename /qmaxnt/u04/qmaxntorafiles/table/QMAXAD08_02.dbf
Solution
To implement the solution, please use nofilenamecheck in syntax as follows:
1. Connect to Target, auxiliary, and rman catalog and
2. use script as
run{
set until time "to_date('2005/09/17 14:00:00','yyyy/mm/dd HH24:MI:SS')";
allocate auxiliary channel aux1 type 'sbt_tape';
allocate auxiliary channel aux2 type 'sbt_tape';
duplicate target database for standby dorecover nofilenamecheck;
Make sure to use auxiliary type of channel so RMAN restore take place at auxiliary database.
Thanks,
Rafi.
http://rafioracledba.blogspot.com/ -
From RMAN - Not able to connect to the target database as sysdba
I wanted to configuring the backup server (rman catalog database server) to take RMAN
backups of the varius target databases. while connecting to the target database
from backup server, i am getting ORA-01031: insufficient privileges error.
I created password file and modified the init.ora file in the target server, but
still having connection issue.
I can over come this issue by keep trying many times while using sqlplus.
pbackup1$ sqlplus "sys/oracle @HCPRD as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Apr 25 17:02:56 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
Enter user-name:
ERROR:
ORA-01017: invalid username/password; logon denied
Enter user-name:
ERROR:
ORA-01017: invalid username/password; logon denied
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
pbackup1$ sqlplus "sys/oracle @HCPRD as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Tue Apr 25 17:03:05 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
SQL>
-- finally, after few attempts, i can connect to the target database server as
sysdba ---
While connectiong thru RMAN, get the following error:
RMAN> connect target sys/oracle@HCPRD
RMAN-00571: ===========================================================
RMAN-00569: ========= ERROR MESSAGE STACK FOLLOWS
RMAN-00571: ===========================================================
ORA-01031: insufficient privileges
RMAN> connect target "sys/oracle @HCPRD as sysdba"
RMAN-00571: ===========================================================
RMAN-00569: ======== ERROR MESSAGE STACK FOLLOWS
RMAN-00571: ===========================================================
ORA-12154: TNS:could not resolve the connect identifier specified
Text continued in next action...Hey,
Please take a look at URL below to see it can help you -
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmcnctg002.htm#i1008102
or
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96566/rcmcnctg.htm#443912
regards,
Marcello. -
RMAN Connections To Primary DB While Creating Standby With Active Database
OS Version : AIX 6.1
DB Version : 11.2.0.1
I am creating a standby database with active database option (without any backups). When i am checking number of connections in my primary database, i can see 3 rman connections
from the standby machine. How oracle reaches to a conclusion of 3 sessions ? Is this number fix or this number can be manipulated with requirment ?
SQL> select sid,serial#,program from v$session;
SID SERIAL# PROGRAM
1 1 oracle@cph-core-db01-s (DIA0)
2 1 oracle@cph-core-db01-s (MMNL)
3 1 oracle@cph-core-db01-s (QMNC)
32 1 oracle@cph-core-db01-s (MMAN)
33 1 oracle@cph-core-db01-s (DMON)
34 3 oracle@cph-core-db01-s (Q000)
63 1 oracle@cph-core-db01-s (PMON)
64 1 oracle@cph-core-db01-s (DBW0)
65 3 sqlplus@cph-core-db01-s (TNS V1-V3)
66 10 oracle@cph-core-db01-s (Q001)
94 1 oracle@cph-core-db01-s (VKTM)
SID SERIAL# PROGRAM
95 1 oracle@cph-core-db01-s (LGWR)
96 3 oracle@cph-core-db01-s (INSV)
*97 27 rman@cph-core-db02-s (TNS V1-V3)*
125 1 oracle@cph-core-db01-s (GEN0)
126 1 oracle@cph-core-db01-s (CKPT)
127 3 oracle@cph-core-db01-s (ARC0)
*129 18 rman@cph-core-db02-s (TNS V1-V3)*
156 3 oracle@cph-core-db01-s (ARC1)
157 1 oracle@cph-core-db01-s (DIAG)
158 1 oracle@cph-core-db01-s (SMON)
159 12 oracle@cph-core-db01-s (SMCO)
SID SERIAL# PROGRAM
187 1 oracle@cph-core-db01-s (DBRM)
188 1 oracle@cph-core-db01-s (RECO)
189 1 oracle@cph-core-db01-s (ARC2)
192 2 oracle@cph-core-db01-s (W000)
218 1 oracle@cph-core-db01-s (PSP0)
219 1 oracle@cph-core-db01-s (MMON)
221 1 oracle@cph-core-db01-s (ARC3)
*222 3 rman@cph-core-db02-s (TNS V1-V3)*Check for the RMAN parallelism in standby database it might be set to 3.
RMAN> show all;
or
Might be you had allocated 3 channels while executing active standby database query. -
How do I connect to a DB2 database from Oracle 10G on linux?
Hi
I have tryed to connect to a DB2 database from oracle 10 G on linux.
I have installed unixODBC and a db2 odbc driver. I can connect to the db2 using isql, but oracle comes with this error:
select * from testtable@acc_spc_gr2
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'
ORA-02063: preceding 3 lines from ACC_SPC_GR2
What am I doing wrong? Any one have a guide to do this?
- Jesperthis is my complete configuration
Database_
-bash-3.2$ export ORACLE_SID=XE
-bash-3.2$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mié Jul 7 10:04:43 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Conectado a:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Platform_
Linux srvpdf 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux
*/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/initDB2DATABASE.init*
#This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
#HS_FDS_CONNECT_INFO = ODBC_DSN
HS_FDS_CONNECT_INFO = prueba
HS_FDS_TRACE_FILE_NAME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/hs/admin/DB2DATABASE.log
HS_FDS_CONNECT_INFO = DB2DATABASE
#HS_FDS_TRACE_LEVEL = debug
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
# ODBC specific environment variables
set ODBCINI=/etc/odbc.ini
# Environment variables required for the non-Oracle system
set DB2INSTANCE=is400
listener.ora_
# listener.ora Network Configuration File:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = DB2DATABASE)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM =hsodbc)
(ENVS = LD_LIBRARY_PATH = /opt/ibm/iSeriesAccess/lib:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.32)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.3.31)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora_
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = srvpdf)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
DB2DATABASE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost )(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = DB2DATABASE)
(HS=OK)
odbc.ini_
[prueba]
Description = iSeries Access ODBC Driver
Driver = iSeries Access ODBC Driver
System = xxx.xx.3.2
UserID = xxxxxx
Password = xxxxxx
Naming = 0
DefaultLibraries = QGPL
Database = CHERRYWEB
ConnectionType = 0
CommitMode = 2
ExtendedDynamic = 0
DefaultPkgLibrary = QGPL
DefaultPackage = A/DEFAULT(IBM),2,0,1,0,512
AllowDataCompression = 0
MaxFieldLength = 32
BlockFetch = 1
BlockSizeKB = 128
ExtendedColInfo = 0
LibraryView = 0
AllowUnsupportedChar = 0
ForceTranslation = 0
Trace = 0
odbcinst.ini_
[PostgreSQL]
Description = ODBC for PostgreSQL
Driver = /usr/lib/libodbcpsql.so
Setup = /usr/lib/libodbcpsqlS.so
FileUsage = 1
[iSeries Access ODBC Driver]
Description = iSeries Access for Linux ODBC Driver
Driver = /opt/ibm/iSeriesAccess/lib/libcwbodbc.so
Driver64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbc.so
Setup = /opt/ibm/iSeriesAccess/lib/libcwbodbcs.so
Setup64 = /opt/ibm/iSeriesAccess/lib64/libcwbodbcs.so
UsageCount = 1
CPTimeout =
CPReuse =
System = 172.18.3.2
User = inf5mito
Password = lonco3pue
NOTE1 = If using unixODBC 2.2.11 or later and you want the 32 and 64-bit ODBC drivers to share DSN's,
NOTE2 = the following Driver64/Setup64 keywords will provide that support.
Threading = 2
DontDLClose = 1
ODBC Driver_
-bash-3.2$ cd /opt/ibm/iSeriesAccess/lib
-bash-3.2$ ls -ltr
total 2260
-r-xr-xr-x 1 root root 443939 Apr 5 2008 libcwbxda.so
-r-xr-xr-x 1 root root 94504 Apr 5 2008 libcwbrc.so
-r-xr-xr-x 1 root root 16636 Apr 5 2008 libcwbodbcs.so
-r-xr-xr-x 1 root root 729572 Apr 5 2008 libcwbodbc.so
-r-xr-xr-x 1 root root 998060 Apr 5 2008 libcwbcore.so
and this is my error.
SQL> /
select from display@db2database*
ERROR en línea 1:
ORA-28500: la conexión de ORACLE a un sistema no Oracle ha devuelto este
mensaje:
*[Generic Connectivity Using ODBC][C077] Could not find symbol 'SQLAllocConnect'*
in dynamic library
*[C079] Failed to load dynamic library*
*'/opt/ibm/iSeriesAccess/lib/libcwbodbc.so'*
ORA-02063: 3 lines precediendo a DB2DATABASE
Edited by: user6669081 on 07-jul-2010 6:31 -
ORA-19505: failed to identify file - RMAN in creating standby DR database.
I got this error when creating standby database at remote target server.
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01"
Here is what I did:
1. started the listener and created corresponding tnsnames entry at remote standyb server
2. startup nomount to the standby database at remote server for an empty instance (instance name dxp1p).
3. All rman backups are in the /backup mount point at primary and the mount point is shared on the remote server as nfs. So, whatever have in the backup we should be able to see and read from the remote as well.
4. Run the following at primary rman:
sql 'alter system archive log current';
backup current controlfile for standby;
sql 'alter system archive log current';
crosscheck backup;
crosscheck archivelog all;
exit
5. Start the rman command from primary after connected to the standby server, as the primary DB uses ASM and the standby DB uses file system for the database files:
RUN
SET NEWNAME FOR DATAFILE 1 to '/u01/dxp1p/data/system01.dbf';
SET NEWNAME FOR DATAFILE 2 to '/u01/dxp1p/data/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 3 to '/u01/dxp1p/data/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 4 to '/u01/dxp1p/data/users01.dbf';
SET NEWNAME FOR DATAFILE 5 to '/u01/dxp1p/data/fxtntdata.dbf';
SET NEWNAME FOR DATAFILE 6 to '/u01/dxp1p/data/fxtntindex.dbf';
SET NEWNAME FOR DATAFILE 7 to '/u01/dxp1p/data/mlogs.dbf';
SET NEWNAME FOR DATAFILE 8 to '/u01/dxp1p/data/dts.dbf';
SET NEWNAME FOR DATAFILE 9 to '/u01/dxp1p/data/dxpsoa.dbf';
SET NEWNAME FOR DATAFILE 10 to '/u01/dxp1p/data/expresso_ts.dbf';
SET NEWNAME FOR DATAFILE 11 to '/u01/dxp1p/data/jms_ts.dbf';
SET NEWNAME FOR DATAFILE 12 to '/u01/dxp1p/data/uup_ts.dbf';
SET NEWNAME FOR DATAFILE 13 to '/u01/dxp1p/data/newpage_ts.dbf';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE for standby
nofilenamecheck
dorecover;
========================================================================
But I got this error from the rman log:
contents of Memory Script:
set until scn 12245784375453;
restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
Starting restore at 04-DEC-13
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01
channel aux1: ORA-19870: error while restoring backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_20131204_833310136_464
channel aux1: ORA-19870: error while restoring backup piece /backup/dxp1p/online/DXP1P_20131204_833310136_464
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_20131204_833310136_464"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-00
channel aux1: ORA-19504: failed to create file "/oracle/product/11g/dbs/u02/dxp1p/control/control02.ctl"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
Additional information: 1
ORA-19600: input file is control file (/u01/dxp1p/control/control01.ctl)
ORA-19601: output file is control file (/oracle/product/11g/dbs/u02/dxp1p/control/control02.ctl)
Finished restore at 04-DEC-13
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/04/2013 19:06:13
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 12/04/2013 19:06:13
RMAN-11003: failure during parse/execution of SQL statement: alter database mount standby database
ORA-00205: error in identifying control file, check alert log for more info
=========================================
Not sure why, can somebody help? Appreciated!I used company regular script to login to standby instance as sys user from primary DB RMAN as oracle OS user and sys DB user. We normally run this way for years.
Like this:
$ORACLE_HOME/bin/rman target=/ auxiliary 'sys/sys0rapr321!'@dxp1p_s11 CMDFILE=${HOME}/dba/scripts/rman_cr_dr.cmd
rman_cr_dr.cmd:
RUN
SET NEWNAME FOR DATAFILE 1 to '/u01/dxp1p/data/system01.dbf';
SET NEWNAME FOR DATAFILE 2 to '/u01/dxp1p/data/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 3 to '/u01/dxp1p/data/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 4 to '/u01/dxp1p/data/users01.dbf';
SET NEWNAME FOR DATAFILE 5 to '/u01/dxp1p/data/fxtntdata.dbf';
SET NEWNAME FOR DATAFILE 6 to '/u01/dxp1p/data/fxtntindex.dbf';
SET NEWNAME FOR DATAFILE 7 to '/u01/dxp1p/data/mlogs.dbf';
SET NEWNAME FOR DATAFILE 8 to '/u01/dxp1p/data/dts.dbf';
SET NEWNAME FOR DATAFILE 9 to '/u01/dxp1p/data/dxpsoa.dbf';
SET NEWNAME FOR DATAFILE 10 to '/u01/dxp1p/data/expresso_ts.dbf';
SET NEWNAME FOR DATAFILE 11 to '/u01/dxp1p/data/jms_ts.dbf';
SET NEWNAME FOR DATAFILE 12 to '/u01/dxp1p/data/uup_ts.dbf';
SET NEWNAME FOR DATAFILE 13 to '/u01/dxp1p/data/newpage_ts.dbf';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE for standby
nofilenamecheck
dorecover;
exit
==========================
Oinstall is a group. I am not sure to use oinstall as a user? -
Hi Forum
I'm trying to create a standby database, but rman was returning this error:
Recovery Manager: Release 10.2.0.3.0 - Production on Sun Sep 9 14:57:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: ARS (DBID=3312174455)
connected to auxiliary database: ARS (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 09-SEP-07
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=156 devtype=DISK
contents of Memory Script:
restore clone standby controlfile;
sql clone 'alter database mount standby database';
executing Memory Script
Starting restore at 09-SEP-07
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle/bkp2/qoirgqbb_1_1
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/oracle/bkp2/qoirgqbb_1_1 tag=TAG20070909T133643
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:08
output filename=+ARS_DAT1/ars_stb/controlfile/current.259.632847497
Finished restore at 09-SEP-07
sql statement: alter database mount standby database
released channel: ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/09/2007 14:58:23
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename +ARS_DAT9/ars/datafile/arsystem1.259.632688645 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT8/ars/datafile/arsystem1.259.632688517 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT11/ars/datafile/arsystem1.258.632688041 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT10/ars/datafile/arsystem1.258.632687911 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT9/ars/datafile/arsystem1.258.632687595 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT8/ars/datafile/arsystem1.258.632687189 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT11/ars/datafile/arsystem1.257.632687073 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT10/ars/datafile/arsystem1.257.632686841 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT9/ars/datafile/arsystem1.257.632686671 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT8/ars/datafile/arsystem1.257.632686585 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT11/ars/datafile/arsystem1.256.632686301 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT10/ars/datafile/arsystem1.256.632686193 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT9/ars/datafile/arsystem1.256.632685671 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT8/ars/datafile/arsystem1.256.632685547 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT3/ars/datafile/arindex.258.624755731 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT3/ars/datafile/arindex.257.624755679 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT3/ars/datafile/arindex.256.624755627 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT2/ars/datafile/arhistory.258.624755445 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT2/ars/datafile/arsystem2.259.624755449 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT2/ars/datafile/arsystem2.257.624755395 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT2/ars/datafile/integracao.256.624755339 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT1/ars/datafile/undotbs2.264.624752453 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT1/ars/datafile/users.259.624752397 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT1/ars/datafile/sysaux.257.624752397 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT1/ars/datafile/undotbs1.258.624752397 conflicts with a file used by the target database
RMAN-05001: auxiliary filename +ARS_DAT1/ars/datafile/system.256.624752397 conflicts with a file used by the target database
Bellow is my init file of standby instance:
*.audit_file_dest='/oracle/admin/ars_stb/adump'
*.background_dump_dest='/oracle/admin/ars_stb/bdump'
*.core_dump_dest=/oracle/admin/ARS_STB/cdump
*.user_dump_dest='/oracle/admin/ars_stb/udump'
*.cluster_database_instances=2
*.cluster_database=false
*.db_unique_name=ars_stb
*.instance_name=ars_stb
*.compatible='10.2.0.3.0'
*.control_files='+ARS_DAT1/ars/controlfile/current.260.624761147','+ARS_DAT6/ars/controlfile/current.269.624761147'#Restore Controlfile
*.db_block_size=8192
*.db_create_file_dest='+ARS_DAT1'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='ars'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=ars_stbXDB)'
*.job_queue_processes=10
*.local_listener='LISTENERS_ARS'
*.log_archive_dest_1='LOCATION=+ARS_ARCH MANDATORY'
*.log_archive_format='ars%t_%s_%r.arc'
*.open_cursors=300
*.pga_aggregate_target=3145728000
*.processes=150
*.remote_listener='LISTENERS_ARS'
*.remote_login_passwordfile='exclusive'
*.sga_target=8388608000
*.thread=1
*.undo_management='AUTO'
*.undo_retention=3600
*.undo_tablespace=UNDOTBS1
*.log_archive_config='dg_config=(ARS_STB,ARS)'
*.log_archive_dest_2='service=ARS1 valid_for=(online_logfiles,primary_role) db_unique_name=ARS'
*.db_file_name_convert= '+DAT_ARS1/ars/','+DAT_ARS1/ars_stb/',
'+DAT_ARS2/ars/','+DAT_ARS2/ars_stb/',
'+DAT_ARS3/ars/','+DAT_ARS3/ars_stb/',
'+DAT_ARS4/ars/','+DAT_ARS4/ars_stb/',
'+DAT_ARS5/ars/','+DAT_ARS5/ars_stb/',
'+DAT_ARS6/ars/','+DAT_ARS6/ars_stb/',
'+DAT_ARS7/ars/','+DAT_ARS7/ars_stb/',
'+DAT_ARS8/ars/','+DAT_ARS8/ars_stb/',
'+DAT_ARS9/ars/','+DAT_ARS9/ars_stb/',
'+DAT_ARS10/ars/','+DAT_ARS10/ars_stb/',
'+DAT_ARS11/ars/','+DAT_ARS11/ars_stb/',
'+DAT_ARS12/ars/','+DAT_ARS12/ars_stb/',
'+DAT_ARS13/ars/','+DAT_ARS13/ars_stb/'
*.log_file_name_convert='+DAT_ARCH/ars/','+DAT_ARCH/ars_stb/'
*.standby_file_management=auto
*.fal_server='ARS1','ARS2'
*.fal_client='ARS_STB'
*.service_names='ARS_STB'
Thanks in advanceA big mistake, sorry
The correct convert parameters must be:
*.db_file_name_convert= '+ARS_DAT1/ARS/','+ARS_DAT1/ARS_STB/',
'+ARS_DAT2/ARS/','+ARS_DAT2/ARS_STB/',
'+ARS_DAT3/ARS/','+ARS_DAT3/ARS_STB/',
'+ARS_DAT4/ARS/','+ARS_DAT4/ARS_STB/',
'+ARS_DAT5/ARS/','+ARS_DAT5/ARS_STB/',
'+ARS_DAT6/ARS/','+ARS_DAT6/ARS_STB/',
'+ARS_DAT7/ARS/','+ARS_DAT7/ARS_STB/',
'+ARS_DAT8/ARS/','+ARS_DAT8/ARS_STB/',
'+ARS_DAT9/ARS/','+ARS_DAT9/ARS_STB/',
'+ARS_DAT10/ARS/','+ARS_DAT10/ARS_STB/',
'+ARS_DAT11/ARS/','+ARS_DAT11/ARS_STB/',
'+ARS_DAT12/ARS/','+ARS_DAT12/ARS_STB/',
'+ARS_DAT13/ARS/','+ARS_DAT13/ARS_STB/'
*.log_file_name_convert='+DAT_ARCH/ARS/','+DAT_ARCH/ARS_STB/' -
RMAN-04005: error from target database:
Hi,
when I want register my target by
]$ rman catalog prdrman/prdrman@PRD target sys/manager@DEV
I receive this :
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
Do you have any idea ?
Many thanks before.Here are some further hints from documentation:
ORA-01031: insufficient privileges
When : SQL> connect sym/sym as SYSDBA
Additional : init.ora remote_login_passwordfile=EXCLUSIVE or SHARED
Cause : Username/password is not correct (if the user is added by granting
SYSDBA to the user, this user is added to the passwordfile with the
password from the data dictionary)
or:
Password file has
-> incorrect name orapw<name_of_database>
-> is not in $ORACLE_HOME/dbs
-> has wrong privileges
They should be -rwSr-----
For example:
-rwSr----- 1 server sdb 1536 Mar 25 08:12 orapwv901
Solve : You can set the correct privileges (Unix) by issueing
$ chmod 4640 passwordfile
As a last resort, recreate the password file and remind to add
additional privileged (sysdba or sysoper) users -
Hi
I am using Oracle 10g XE.
Now I need to connect to RMAN.
How could I proceed?
I am trying to enter to sqlplus from cmd prompt rather than sql commans line short cut.
Because to connect to rman,I need to get into OS prompt right
Please guide me as simple as possible.KVB wrote:
Thank you Atil.
I had a few questions.Please answer in short
I am using Oracle 10gXE.I am using RMAN.Client and server are on same system.
Which will be the best one for backuping the database because I have to perform all the RMAN commands .
1)Can I create a target DB in the same system itself?This question reveals a big misunderstanding right off the bat. The 'target' database is the database you want to backup. Your question implies that you think the 'target database' is something used by rman for its own purposes.
If you are simply asking if you can have two XE databases on the same server, I'm not sure. Certainly you can with Enterprise or Standard Editions, but it seems to me that a single database, named XE, is a limitation of XE. Those that have worked with XE may correct or confirm.
2)Can I open at a time 2 databases as RMAN backup needs the target DB should be opened.
Absolutely rman backup needs to open the target db. That is the db it is backing up. No target DB means no reason to even run rman.
And rman can have 3 databases open at once .. the target (being backed up), the auxiliary (a second database being cloned from the target) and the catalog db (where rman can do more bookeeping than available in the control file alone. You always have a target db; some operations inherently mean you also have an auxiliary db; a catalog is seldom if ever required but can be a very nice to have.
I'd suggest you get a copy of http://www.amazon.com/Oracle-Backup-Recovery-Osborne-ORACLE/dp/0071628606/ref=sr_1_1?s=books&ie=UTF8&qid=1305724426&sr=1-1. The 10g version really helped me cut through some of the fog of the official reference manual.
I am just confused over that links..
Thats why I am solving the questions one by one.
It's really appreciable for your answers. -
Dw cs5 with existing wordpress site hosted on yahoo need help connecting to existing remote database
I am having trouble establishing a database connection. I can connect with test databases but am having trouble using dreamweaver wtih my existing wordpress website. Am I able to use dreamweaver to edit and live view my changes before uploading the changed files to my live site? Am I able to access my existing wordpress database with dreaweaver? I have imported it to my testing server/database but still seem to be having trouble establishing a connection with it (think maybe my folder hierarchy might be off).
macintosh HD/Applications/MAMP/htdocs/nwm/wp/index.php
"nwm" is the name of the folder that I have copied all of my site files to and the folder I have dreamweaver pointing to. "wp" is what I have all of the wordpress files in (the ones I copied from my yahoo server - including all my current theme files etc.)
I am trying to put the info into the mysql connection dialog box:
Connection Name: Testing (i am assuming this name is for my benefit only and doesn't actually matter)
MySQL Server: mysql
User Name: *****
Password: *****
Database: wp
and am getting this message
MySQL Error#: 2013
Lost connection to MySQL server at 'reading initial communication packet', system error 61
did some google seaches of the error. Tried turning off the firewall, and the advance tab allow mysql incoming (there were 2 one was allow one was not allow. I changed both to allow)
Cant really find anything on yahoo to help me out. Looked in phpmyadmin database named wp: wp_users to get the username and password (which due to previous look for help - I think the password was encrypted cuz it looked like a bunch of mumbo jumbo and am fairly certain I know the correct password).
Any help would be greatly appreciated!! I spent $50 on live chat last night trying to resolve the issue only to find out at the end that the guy really didn't understand my problem and doesn't have dreamweaver. I have also watched countless videos on Lynda.com and have been thru forum after forum. While this problem is only a couple weeks old since I just got CS5. I have been having trouble making any headway learning php since I cant seem to make it past the set up parts. I have done the php / mysql essential training on lynda.com with relative success except that I really dont want to work with any more exercise files so I didn't go on to the beyond the basics. I recently went thru most of the Dreamweaver CS5 and Wordpress 3. Also did the first 4 chapters of Dreamweaver CS5 with PHP and MySQL. I need to start integrating things into my live sites. I am also trying to work my way thru the learning php, mysql, javascript book by o'reily media by robin nixon (as fun as reading a math text book) can't get thru it since I can't relate any of it to my current sites/needs
I am on MacBookPro OSX 10.6.6
Installed MAMP to specification on all 20 tutorials I have tried including lynda.com
Tested the testing server and is working
Just installed dreamweaver cs5
have been using wordpress online to create and edit posts (recently upgraded to 3.? whatever the latest update was online which I believe update the files on my yahoo server?)
Have also installed wordpress on my computer (several times thru each tutorial trying to get this right.)
Am I expecting the impossible?If wordpress controls it's own connection why am I unable to use the live view. I have synced the remote site to my local computer so all the files should be just as they are online with the exception of the DB which contains most of the content.
I have done all of those steps. I have even exported the database from inside internet phpmyadmin and imported into computer phpmyadmin. When I hit live view I get one of couple of errors.
1. "One is that the dynamic related files could not be displayed due to an internal server error"
At some point I was able to view some sample files inside dreamweaver. But I would like to be able to view my real site files. I was able to "connect" to the local databases (not the copy of my real one - I think that maybe that was because it is somehow nested inside another db an am going try to reimport to new location). And then I changed the host/username/password trying to deal with the internal server error. Now instead I get the cannot connect to the database Error 2016 or whatever from the origianl post. Also, I am using yahoo if that matters and all I can find about what their server name is: mysql - is that correct?
I have been thru this so many times with so many different tutorials I am losing track of what is what.
2. Can I access my remote database within dreamweaver? I do not want to create dummy files (seems to be a waste of time). And while if it had worked exporting/importing a duplicate on to my computer would have satisfied me for a little while it also seems some what counter productive. Since every post and page is different if I were doing a daily updates etc how would I be able to change the formating or design of them if I can't access the remote files. Would I re- import everytime I want to work on it to get current database?
I am trying to be clear. I listed all the specs I could think as listed in your "how to get help fast post" (yes I read that at least twice too) of all of the steps and possible reasons for my problems. I also thought that the forum was on a seperate site so I didn't think it would count as a duplicate. I am frustrated to tears and am feeling incredibly stupid that after all this time and all these tutorials yes you are right I obviously am not understanding what is going on which is why I am on this forum. -
SharePoint 2007:Cannot connect to the configuration database.
The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors:
Log Name: Application
Source: Office Server Search
Date: 2015/2/28 22:30:47
Event ID: 10034
Task Category: Gatherer
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Office Server Search" />
<EventID Qualifiers="49152">10034</EventID>
<Level>2</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
<EventRecordID>2323514</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name: Application
Log Name: Application
Source: Windows SharePoint Services 3
Date: 2015/2/28 22:30:50
Event ID: 5586
Task Category: Database
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows SharePoint Services 3" />
<EventID Qualifiers="0">5586</EventID>
<Level>2</Level>
<Task>484</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
<EventRecordID>2323517</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>64</Data>
<Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source: Windows SharePoint Services 3
Date: 2015/2/28 22:31:00
Event ID: 27745
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows SharePoint Services 3" />
<EventID Qualifiers="14130">27745</EventID>
<Level>2</Level>
<Task>1105</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
<EventRecordID>2323520</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C) 0x08FC Search Server Common
GathererSql 0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common UtilCommon
0 Monitorable Dumping error record [0]: Source: Microsoft OLE DB Provider for SQL Server HRESULT: 0x80004005 Code: 11 Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Connecting to an Oracle database after clicking on a foi
Does anyone know how or have any examples on how to connect to an oracle database after clicking on a 'feature of interest' in MapViewer? I want to be able to click on a 'feature of interest' on the map, and have a list of records from an oracle table displayed using the identified key of the foi. I am able to create the feature of interest, and add the event listener for 'mouse click', but am unsure how to connect to the database at this point. I have been able to connect to the database in a different jsp, but not from here. Thank you.
1. Create a JSP page that does the database query. It should take the foi id as an input parameter.
2. In the foi mouse click listener, display the JSP page in iframe. The iframe can be placed outside the map or inside the info window. The function should do something like this.
function myClickListener(point, foi)
mapview.displayInfoWindow(point, "<iframe id='my_iframe_id' frameborder=0 width=300px height=400px />", 300, 400) ;
var myIframe = document.getElementById("my_iframe_id") ;
myIframe.src = "http://myhost/myjsp?key=" + foi.id ;
} -
Error while registering RMAN from primary to catalog database
Hi all,
Here we have a 10g dataguard environment with db1(db_unique_name) as primary and db2(db_unique_name) as physical standby database. Also we configured one schema on a third machine as catalog database using following steps.
The steps executed in catalog database(appsdb):
SQL> create tablespace rmancatlog_tbs datafile '/u01/app/oracle/oradata/NEW/rman_catalog.dbf' size 500M autoextend off extent management local segment space management auto;
SQL> create user rman identified by oracle
2 default tablespace rmancatlog_tbs
3 quota unlimited on rmancatlog_tbs
4 ;
SQL> GRANT connect, resource, recovery_catalog_owner TO rman;
RMAN> create catalog;
recovery catalog created
Added tns entries of catalog database in primary and standby. Then from primary database we tried to register to catalog database. It is showing that it is registering. But every query afterwards in rman is throwing the error. Below are the steps and error:
[oracle@db1 ~]$ rman target sys/oracle catalog rman/oracle@appsdb
Recovery Manager: Release 10.2.0.3.0 - Production on Mon Aug 13 21:39:32 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: NIOS (DBID=1589015669)
connected to recovery catalog database
RMAN> register database;
database registered in recovery catalog
RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 10/08/2012 06:16:06
RMAN-00600: internal error, arguments [8201] [] [] [] []
Can anyone help regarding this error?
Thanks in advance.on resync catalog it is throwing no output or error.
but it shows same error afterwards.
RMAN> resync catalog;
RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 10/09/2012 03:55:53
RMAN-00600: internal error, arguments [8201] [] [] [] []
Maybe you are looking for
-
Desired text in top of page in ALV
Hi All, Due to some technaical requirement user want to convert sapscript form into ALV GRID report. Can we show some text in right justified mode, some in left justified mode, some in center, some in bold character, etc. in top of page in ALV. Edite
-
Read encrpted zip file and ftp unzip file
Hi, I have a situation,where i need to read 3 zip files, which are encrpted, and each zip file may have lot of images and text files. all i want to do is, read these 3 zip files and unzip + ftp to another directory. No mapping is involved. if the thr
-
Telnet to router through AUX port
i have configured my router to telnet through modem dialin but when i dials from my pc to router it give me garbage charcter in my hyperterminal. can any one help me that is this is problem with my router configuration or the cable connection with th
-
Why won't my iPad 2 charge above 50%?
I recieved my iPad 2 as a gift in October of 2011. Up until now I've had no problems. Yesterday I had depleted my battery to about 7%, so I plugged it in for at least 4 hours while I went for a walk. When I came back the gauge said only 50%. I used i
-
Flash player 11.7.700.224
Je suis sur PC, Windows 7 Pro, Windows Internet Explorer 9. J'ai téléchargé FlashPlahyer 11.7.700.224 et ne peut ouvrir aucune vidéo ni PDF Calaméo qui me sont transmises dans le cadre de mon bénévolat pour la recherche médicale sur la sclérose en pl