RMAN error during auto backup

Hello,
We have crontab to take archivelog backup at every hour at 10 mins. mon-sat incremental and sunday level 0 backup. Today morning I got following error in the log file. (RAC DB 10.2.0.5, OS=RHL)
RMAN-00571:
===========================================================brRMAN-00569: ===============
ERROR MESSAGE STACK FOLLOWS ===============brRMAN-00571:
===========================================================brRMAN-03002: failure of backup
plus archivelog command at 05/21/2012 05:55:59brRMAN-03014: implicit resync of recovery
catalog failedbrRMAN-06004: ORACLE error from recovery catalog database: ORA-03113:
end-of-file on communication channelbrORACLE error from recovery catalog database:
ORA-03114: not connected to ORACLEbrRMAN-00571:
===========================================================brRMAN-00569: ===============
ERROR MESSAGE STACK FOLLOWS ===============brRMAN-00571:
===========================================================brRMAN-03002: failure of
allocate command at 05/21/2012 05:56:00brRMAN-06004: ORACLE error from recovery catalog
database: ORA-03114: not connected to ORACLElist backup of archivelog all; .. while connecting to rman catalog..following are the few lines from the output.
I found almost related MOS note but unfortunately, I am still unable to understand what actually happened or what is trying to be explain in this particular note. RMAN Backup fails with error ORA-3114 [ID 1264084.1]. One more important question for my concern is that if the command failed for example as in my case. The next time when backup command started to take incremental backups, will it cover or backup those archivelog which were not backed up because of the above error?
List of Archived Logs in backup set 2481637
Thrd Seq     Low SCN    Low Time            Next SCN   Next Time
1    67414   27261392224 21-05-2012 05:10:22 27261405217 21-05-2012 05:55:55
1    67415   27261405217 21-05-2012 05:55:55 27261422601 21-05-2012 06:10:07
2    70049   27261392222 21-05-2012 05:10:20 27261405224 21-05-2012 05:55:57
2    70050   27261405224 21-05-2012 05:55:57 27261422604 21-05-2012 06:10:08Thank you.
Best Regards.

A "BACKUP ARCHIVELOG" is not an "Incremental Backup" (ergo, the question of "differential" or "cumulative" doesn't arise).
It is a Backup of the ArchiveLogs specified in archlogspecifier . Since you have specified "ALL" it will attempt to backup all known archivelogs that have not been deleted. The "DELETE ALL INPUT" will delete the files after they have been successfully backed up. If the backup fails, the DELETE is not executed. Therefore, at the next execution, the same (and newer) ArchiveLogs will get backed up.
Why don't you maintain a log of the RMAN Backup run (either with "SPOOL LOG TO .." in the RMAN script or by redirecting STDOUT and STDERR to a custom log file).
Hemant K Chitale

Similar Messages

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import
I've seen this issue since beta1. The issue seems to be related to a camera setting that stores the files in folders by date. The Folder structure becomes drive>DCMI>10202008>image.ARW
This "no photos found error" I have seen in beta1 LR1 LR1.1 LR1.2 LR1.3 LR1.4 and LR2.0 this is still an issue in LR2.1
Auto import works fine with canon or nikon RAW files (I've used several different cameras with no problems)
The Folder structure for canon files is drive>DCMI>100>image.CR2
Auto import Does not work with Sony A100 .ARW files with folders by date turned on I have heard from people with other Sony cameras like the A700 also have this issue.
Vista Ultimate 32bit SP1
AMD 64X2 duel core 6000+ 3Ghz
6GB 666mhz Ram PAE force enabled
NVIDIA Gforce 7600 256MB video card (1.75GB total with system shared ram)
Primary hard drive: 500GB
Hard drive 2: 400GB (system and photoshop paging files and lightroom catalog drive)
Hdrive 3: 1TB (primary image storage)
user control turned off
system graphics set to performance
Duel display
Lightroom 2.1
photoshop CS3

I believe this is fixed in version 2.5 and 3.0
ARW (Sony Raw) files seem to work with auto import

RMAN throwing errors during Tablespace Backup - RMAN-06004 and RMAN-06019

Hi All.
Please help me to fix trail of error message I'm getting while trying backup of a newly added tablespace in database. I'm using RMAN as a recovery method.
Tablespace Name: test
DB Version: Oracle 10g R1.
OS: Red Hat Linux 5
RMAN> report schema;
Report of database schema
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
1 490 SYSTEM YES /u01/app/oracle/oradata/qrcl/system01.dbf
2 25 UNDOTBS1 YES /u01/app/oracle/oradata/qrcl/undotbs01.dbf
3 270 SYSAUX NO /u01/app/oracle/oradata/qrcl/sysaux01.dbf
4 23 USERS NO /u01/app/oracle/oradata/qrcl/users01.dbf
5 40 TEST NO /u01/app/test01.dbf
List of Temporary Files
=======================
File Size(MB) Tablespace Maxsize(MB) Tempfile Name
1 20 TEMP 32767 /u01/app/oracle/oradata/qrcl/temp01.dbf
RMAN>
RMAN> backup tablespace "test";
Starting backup at 22-AUG-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 08/22/2012 11:57:13
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20202: tablespace not found in the recovery catalog
RMAN-06019: could not translate tablespace name "test"
RMAN> restore tablespace test;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "test": expecting one of: "double-quoted-string, identifier, single-quoted-string"
RMAN-01007: at line 1 column 20 file: standard input
I tried to update Catalog Server but still no luck:
RMAN> RESYNC CATALOG;
starting full resync of recovery catalog
full resync complete
Please Assist.
Thanks
Prashant Dixit

Hello Prashant;
The main issue is your tablespace name is an RMAN Reserved Word "Test"
http://docs.oracle.com/cd/B13789_01/server.101/b10770/rcmcomma.htm#1006728
Different test
-- Create the tablespace
CREATE TABLESPACE OTN_TEST DATAFILE
'/u01/oradata/RECOVER2/test01.dbf' SIZE 1M AUTOEXTEND OFF
LOGGING
ONLINE;-- Create a user for the tablespace
CREATE USER RMAN_TEST
IDENTIFIED BY RMAN_TEST
DEFAULT TABLESPACE OTN_TEST
TEMPORARY TABLESPACE TEMP
PROFILE DEFAULT
ACCOUNT UNLOCK;
ALTER USER RMAN_TEST QUOTA UNLIMITED ON "OTN_TEST"; -- Create a table in the tablespace
CREATE TABLE RMAN_TEST.EMP
EMPNO     NUMBER,
ENAME     VARCHAR2(30 BYTE),
JOB       VARCHAR2(30 BYTE),
MGR       NUMBER,
HIREDATE DATE,
SAL       NUMBER,
COMM      NUMBER,
DEPTNO    NUMBER
TABLESPACE OTN_TEST;-- Add some data
SET DEFINE OFF;
Insert into RMAN_TEST.EMP
   (EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO)
Values
   (7369, 'SMITH', 'CLERK', 7902, TO_DATE('12/17/1980 00:00:00', 'MM/DD/YYYY HH24:MI:SS'),
    800, 20, 0);
Insert into RMAN_TEST.EMP
   (EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO)
Values
   (5000, 'NOCATALOG', 'DBA', 77902, TO_DATE('04/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'),
    200, 0, 0);
COMMIT;-- start RMAN and backup tablespace
RMAN> BACKUP TABLESPACE OTN_TEST;
Starting backup at 22-AUG-12
starting full resync of recovery catalog
full resync complete
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00007 name=/u01/oradata/RECOVER2/test01.dbf
channel ORA_DISK_1: starting piece 1 at 22-AUG-12
channel ORA_DISK_1: finished piece 1 at 22-AUG-12
piece handle=/u01/app/oracle/flash_recovery_area/RECOVER2/backupset/2012_08_22/o1_mf_nnndf_TAG20120822T080711_839pczng_.bkp tag=TAG20120822T080711 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 22-AUG-12
Starting Control File and SPFILE Autobackup at 22-AUG-12
piece handle=/u01/app/oracle/flash_recovery_area/RECOVER2/autobackup/2012_08_22/o1_mf_s_791971633_839pd1bm_.bkp comment=NONE
Finished Control File and SPFILE Autobackup at 22-AUG-12
Note
If you dropped the tablespace then you need to recover the database to a point in time, not the tablespace.
Best Regards
mseberg

Errors during LIST BACKUP after backup

Checking my backup logs for ORA- or RMAN- errors brought up this:
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-19921: maximum number of 64 rows exceededThat occurred during a "list backup" command that I run after my BACKUP DATABASE command. Files before and after that section run just fine. Is this something I need to be concerned with? Checking back, it looks like it's been happening in my level0 and level1 incrementals for about a week.
This is on Oracle EE 10gR2 (10.2.0.2) on RHEL.

hi,
These warnings can be ignored and will not affect rman functionality.
Depending on your RDBMS version :
- Uptill 10.2.0.4 : Ignore the message
- 10.2.0.5 or higher :
Download Patch 8264365 to resolve this issue.
Bug 8264365 is related to the RMAN-executable only, so NOT to the TARGET or CATALOG databases itself. So you need to patch the ORACLE_HOME used by the RMAN-executable.
Thanks
Satish

Rman error when taking backup archivelog all delete input

archive log filename=+FRA01/osondemand/archivelog/2012_02_27/thread_2_seq_15028.7182.776323223 recid=122876 stamp=77
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/27/2012 05:23:14
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 3: ORA-00603: ORACLE server session terminated by fatal error
ORA-04030: out of process memory when trying to allocate 272 bytes (PL/SQL DIANA,PTG: No
10.2.04
windows
two node rac
please help me with above error
thanks for help

Hi;
Duplicate post
Re: rman error when i am doing backup archivelog delete input
Regard
Helios

Error during offline backup thru DB13 on AIX.

Dear All,
Now since 3 weeks i am unable to fire a offline backup on my PRD server, i am able to take a successful online backup on the same server.
We are using Tivoli backup solution for backups, but the backups are fired using tx-code: DB13. When i check the detailed logs for the error i see the below lines.
BR0143I Backup type: offline_force
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2010-03-08 06.30.40
BR0307I Shutting down database instance RT2 ...
BR0278E Command output of '/oracle/RT2/102_64/bin/sqlplus':
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Mar 8 06:30:40 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> Connected.
SQL> csh: The file access permissions do not allow the specified action.
SQL> ORA-01013: user requested cancel of current operation
SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
BR0280I BRBACKUP time stamp: 2010-03-08 07.30.41
+BR0279E Return code from '/oracle/RT2/102_64/bin/sqlplus': 0+
BR0302E SQLPLUS call for database instance RT2 failed
BR0309E Shutdown of database instance RT2 failed
BR0056I End of database backup: becswrbx.aff 2010-03-08 07.30.41
BR0280I BRBACKUP time stamp: 2010-03-08 07.30.41
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2010-03-08 07.30.41
BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20090824063000 -d util_file -c force -cds -p initRT2_tiv_wkly.sap'
BR0280I BRBACKUP time stamp: 2010-03-08 07.36.23
BR0292I Execution of BRARCHIVE finished with return code 0
Please help me on the same.
Thanks and regards
Hunky

Dear Markus,
The following are the results of ls -l br*
PRD server results
-rwsrwxr-x   1 orart2   sapsys      4956090 Nov 13 2007 brarchive
-rwsrwxr-x   1 orart2   sapsys      5082125 Nov 13 2007 brbackup
-rwsrwxr-x   1 orart2   sapsys      6621600 Nov 13 2007 brconnect
-rwxrwxr-x   1 orart2   sapsys      5564662 Nov 13 2007 brrecover
-rwxrwxr-x   1 orart2   sapsys      2071826 Nov 13 2007 brrestore
-rwxrwxr-x   1 orart2   sapsys      6841991 Nov 13 2007 brspace
-rwsrwxr-x   1 orart2   sapsys      2710864 Nov 13 2007 brtools
DEV server results
-rwsrwxr-x   1 orart1   dba         5019199 Jun 12 2008 brarchive
-rwsrwxr-x   1 orart1   dba         5146308 Jun 12 2008 brbackup
-rwsrwxr-x   1 orart1   dba         6686520 Jun 12 2008 brconnect
-rwxrwxr-x   1 orart1   dba         5614646 Jun 12 2008 brrecover
-rwxrwxr-x   1 orart1   dba         2109311 Jun 12 2008 brrestore
-rwxrwxr-x   1 orart1   dba         6911788 Jun 12 2008 brspace
-rwsrwxr-x   1 orart1   dba         2751018 Jun 12 2008 brtools
And also i have checked with the permissions as suggested by Mishra, i dont see a great difference among the file permissions.
Can you be more precise about which files have the s-bit in the bin and lib directories.I see a lot of files and i did verify to an extent and saw that there are no changes in the file permissions, yet again i might have missed on few things.
I have also logged in as sid<adm> user and ran br stats which was completed successfully and i have also logged into SQL and ran few select queries, which fetch me the results.
I request all to kindly further help me on this.
Thanks and regards
Hunky

Error   during DEV backup PSAPSR3 is already in backup status

Dear All,
When i m taking development backup.It generating the error PSAPSR3 is already in backup status.Plz tell me how to resolve this issue.
LOG file is attached.
BR0051I BRBACKUP 7.00 (13)
BR0189W Expiration period equal 0 - backup volumes could be immediately overwritten
BR0055I Start of database backup: bdxxiprp.ant 2008-05-13 17.40.29
BR0477I Oracle pfile E:\oracle\MRD\102\database\initMRD.ora created from spfile E:\oracle\MRD\102\database\spfileMRD.ora
BR0280I BRBACKUP time stamp: 2008-05-13 17.40.32
BR0319I Control file copy created: G:\oracle\MRD\sapbackup\CNTRLMRD.DBF 24461312
BR0328E Database file Q:\SAPDATA1\SR3_1\SR3.DATA1 of tablespace PSAPSR3 is already in backup status
BR0328E Database file Q:\SAPDATA1\SR3_2\SR3.DATA2 of tablespace PSAPSR3 is already in backup status
BR0328E Database file Q:\SAPDATA1\SR3_3\SR3.DATA3 of tablespace PSAPSR3 is already in backup status
BR0328E Database file Q:\SAPDATA1\SR3_4\SR3.DATA4 of tablespace PSAPSR3 is already in backup status
BR0328E Database file G:\ORACLE\MRD\SAPDATA1\SR3_5\SR3.DATA5 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_6\SR3.DATA6 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_7\SR3.DATA7 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_8\SR3.DATA8 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_9\SR3.DATA9 of tablespace PSAPSR3 is already in backup status
BR0328E Database file H:\ORACLE\MRD\SAPDATA2\SR3_10\SR3.DATA10 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_11\SR3.DATA11 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_12\SR3.DATA12 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_13\SR3.DATA13 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_14\SR3.DATA14 of tablespace PSAPSR3 is already in backup status
BR0328E Database file I:\ORACLE\MRD\SAPDATA3\SR3_15\SR3.DATA15 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_16\SR3.DATA16 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_17\SR3.DATA17 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_18\SR3.DATA18 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_19\SR3.DATA19 of tablespace PSAPSR3 is already in backup status
BR0328E Database file J:\ORACLE\MRD\SAPDATA4\SR3_20\SR3.DATA20 of tablespace PSAPSR3 is already in backup status
BR0056I End of database backup: bdxxiprp.ant 2008-05-13 17.40.35
BR0280I BRBACKUP time stamp: 2008-05-13 17.40.35
BR0054I BRBACKUP terminated with errors
Thank and Regard's
Adil

Hi ,
Are you taken backup successfully , if not pls check below things.
1,tablespace PSAPSR3 is already in backup status, This error usually occurs when you are running an Online Backup and because of some previous failed backups the table spaces are still under back up status.
pls check if any backup is running or not
ps -ef|grep brbackup .
2 , check any lock file is created under oracl/SID/sapbackup if s remove lock file from the directory .
3 , login into DB
> sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Oct 19 14:57:23 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect /as sysdba
Connected.
SQL> select status from v$backup;
check the status it should not be ACTIVE .
from your case Tablespace PSAPSR3 is already in backup status so login into DB
> sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Tue Oct 19 14:57:23 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> connect /as sysdba
Connected.
alter tablespace PSAPSR3 end backup;
SQL> alter tablespace PSAPSR3 end backup;
Tablespace altered.
SQL> select status from v$backup;
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
STATUS
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
NOT ACTIVE
41 rows selected.
SQL>
After complete the above activity pls fire the backup .
It might be resolve your issue .
Edited by: satheesh0812 on Oct 19, 2010 11:54 AM

Error during PST backup process

Hi,
I am running 3 office 365 exchange accounts in Outlook 2010.
For 1 of the accounts, when I try to make a PST backup, midway thru a message pops out, saying something like this (I cant recall the exact words but it is to this effect):
"an object was not found, process failed"
But the PST file is still created. Does this mean the PST file is missing some of my mails, contacts, calendar items, notes etc?
Appreciate any & all immediate assistance.
Regards,
Doshi

Hi,
If you are trying to backup PST file from Outlook, I suggest to post your issue to
Outlook forum for more professional help.
If there are any Exchange Online issue, please post your question to
Exchange Online Forum.
Thanks for your understanding.
Best Regards.

Rman error when i am doing backup archivelog delete input

archive log filename=+FRA01/osondemand/archivelog/2012_02_27/thread_2_seq_15028.7182.776323223 recid=122876 stamp=77
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/27/2012 05:23:14
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 3: ORA-00603: ORACLE server session terminated by fatal error
ORA-04030: out of process memory when trying to allocate 272 bytes (PL/SQL DIANA,PTG: No
10.2.04
windows
two node rac
please help me with above error
thanks for help

Hi;
Duplicate post:
rman error when taking backup archivelog all delete input
Please close your othere thread as answered and keep updating your other thread here
Regard
Helios

Essbase Version 11 Error During Export

Hi,
I have just installed Hyperion Essbase version 11 on windows 2003 Server, It’s a fresh install on new machine. I am getting following error during nightly backup.
After "Calc All" we export data to the following location. Hyperion\APP\DB. Same Maxl script works fine on version 7 of Essbase. If i export data manually its works fine, only issue i have during nightly back (Automated). Data size is 1.4 GB; Please let me know if you need some more information.
Error.. *ERROR - 1005000 - Ascii Backup: Failed to open [\PLAN\TEST\TEST_Export_AllData_1.txt]..*
Maxl Script:
MAXL> export database "PLAN"."TEST" all data to data_file
2>      "'\\PLAN\\TEST\\TEST_Export_AllData_1.txt'",
3>      "'\\PLAN\\TEST\\TEST_Export_AllData_2.txt'";
Error:
OK/INFO - 1019020 - Writing Free Space Information For Database [TEST].
OK/INFO - 1005029 - Parallel export enabled: Number of export threads [2].
*ERROR - 1005000 - Ascii Backup: Failed to open [\PLAN\TEST\TEST_Export_AllData_1.txt]..*
MaxL Shell completed with error
Thank you,
T.Khan

I tried with other path and it works. I really appreciate all your help. I used following maxl
export database "Plan"."Test" all data to data_file
C:\Hyperion\products\Essbase\EssbaseServer\app\PLAN\TEST\Export_AllDtata_1.txt,
C:\Hyperion\products\Essbase\EssbaseServer\app\PLAN\TEST\Export_AllDtata_2.txt;
What changes I need to make on my maxl. Do I need to make any changes on Variables? Here is my current Maxl
/*      Export Database                              */
/* Environment Variables: (set by calling script)               */
/* $ess_UserName      - Essbase username                     */
/* $ess_Password     - Essbase password                    */
/* $ess_Server          - Essbase server                    */
/* Local variables: (set by MaxL script)                    */
/* $APP               - Essbase application ($1 positional parameter)     */
/* $DB               - Essbase database ($2 positional parameter)     */
/* Any error returned from a MaxL command causes the               */
/* logic to branch to an error exit at end of the script           */
/* set local variables to values of positional parameters */
set APP=$1;
set DB=$2;
/* Login to Essbase */
login $ess_UserName $ess_Password on $ess_Server;
/* Export database in parallel to the database directory - all data */
export database "$APP"."$DB" all data to data_file
     "'\\$APP\\$DB\\$(DB)_Export_AllData_1.txt'",
     "'\\$APP\\$DB\\$(DB)_Export_AllData_2.txt'";
iferror 'ERROREXIT';
/* Normal Exit */
Thank You
T.Khan

Error while taking backup through RMAN in 10g XE

While taking backup through RMAN in XE instance , an error comes out.
The contents of oxe_backup_current file is as below :
XE Backup Log
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 6 15:49:51 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: XE (DBID=2635631092)
RMAN>
echo set on
RMAN> shutdown immediate;
using target database control file instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
RMAN> startup mount;
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area     805306368 bytes
Fixed Size                     1261444 bytes
Variable Size                209715324 bytes
Database Buffers             591396864 bytes
Redo Buffers                   2932736 bytes
RMAN> configure retention policy to redundancy 2;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters are successfully stored
RMAN> configure controlfile autobackup format for device type disk clear;
RMAN configuration parameters are successfully reset to default value
RMAN> configure controlfile autobackup on;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
RMAN> sql "create pfile=''/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora'' from spfile";
*sql statement: create pfile=''/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora'' from spfile*
*RMAN-00571: ===========================================================*
*RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============*
*RMAN-00571: ===========================================================*
*RMAN-03009: failure of sql command on default channel at 07/06/2011 15:50:57*
*RMAN-11003: failure during parse/execution of SQL statement: create pfile='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora' from spfile*
*ORA-27086: unable to lock file - already in use*
*Linux Error: 11: Resource temporarily unavailable*
Additional information: 8
Additional information: 16476
RMAN> backup as backupset device type disk database;
Starting backup at 06-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=102 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00003 name=/usr/lib/oracle/xe/oradata/XE/sysaux.dbf
input datafile fno=00005 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_log01.dbf
input datafile fno=00006 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_lrg01.dbf
input datafile fno=00001 name=/usr/lib/oracle/xe/oradata/XE/system.dbf
input datafile fno=00009 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_log01.dbf
input datafile fno=00010 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_lrg01.dbf
input datafile fno=00002 name=/usr/lib/oracle/xe/oradata/XE/undo.dbf
input datafile fno=00004 name=/usr/lib/oracle/xe/oradata/XE/users.dbf
input datafile fno=00008 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_sml01.dbf
input datafile fno=00012 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_sml01.dbf
input datafile fno=00011 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_mdm01.dbf
input datafile fno=00007 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_mdm01.dbf
channel ORA_DISK_1: starting piece 1 at 06-JUL-11
channel ORA_DISK_1: finished piece 1 at 06-JUL-11
piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T155057_718dw649_.bkp tag=TAG20110706T155057 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:15
Finished backup at 06-JUL-11
Starting Control File and SPFILE Autobackup at 06-JUL-11
piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755797849_718dwofy_.bkp comment=NONE
Finished Control File and SPFILE Autobackup at 06-JUL-11
RMAN> configure controlfile autobackup off;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
new RMAN configuration parameters are successfully stored
RMAN> alter database open;
database opened
RMAN> delete noprompt obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 2
using channel ORA_DISK_1
Deleting the following obsolete backups and copies:
Type                 Key    Completion Time    Filename/Handle
Backup Set           3      06-JUL-11
Backup Piece       3      06-JUL-11          /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T133443_7184wr4d_.bkp
Backup Set           4      06-JUL-11
Backup Piece       4      06-JUL-11          /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755789675_7184x7fp_.bkp
deleted backup piece
backup piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T133443_7184wr4d_.bkp recid=3 stamp=755789684
deleted backup piece
backup piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755789675_7184x7fp_.bkp recid=4 stamp=755789699
Deleted 2 objects
RMAN>
Recovery Manager complete.
RMAN error: See log for details.

I think it is trying to overwrite exiting file. Either give a different name or cleanup the files in preferred location.

Help!! Error during backup

Hello, can anyone point me to the right direction...I was trying to backup my database because I know that there is something wrong with my Oracle 10g Express and I need to reinstall it.
During the backup process this is whats happening:
Warning: Log archiving (ARCHIVELOG mode) is currently disabled. If
you restore the database from this backup, any transactions that take
place between this backup and the next backup will be lost. It is
recommended that you enable ARCHIVELOG mode before proceeding so
that all transactions can be recovered upon restore. See the section
'Enabling ARCHIVELOG Mode...' in the online help for instructions.
Backup with log archiving disabled will shut down and restart the
database. Are you sure [Y/N]? y
Backup in progress...
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Aug 1 12:23:15 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: XE (DBID=2509285891, not open)
RMAN> set echo on;
2> shutdown immediate;
3> startup mount;
4> configure controlfile autobackup format for device type disk clear;
5> configure retention policy to redundancy 2;
6> configure controlfile autobackup on;
7> sql "create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile";
8> backup as backupset device type disk database;
9> configure controlfile autobackup off;
10> alter database open;
11> delete noprompt obsolete;
12>
echo set on
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 171967884 bytes
Database Buffers 423624704 bytes
Redo Buffers 2904064 bytes
RMAN configuration parameters are successfully reset to default value
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters are successfully stored
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
sql statement: create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile
Starting backup at 01-AUG-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=35 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/01/2007 12:23:45
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
Recovery Manager complete.
==================== ERROR =============================
Backup of the database failed.
RMAN Error - See log for details .
Log file is at C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\OXE_BACKUP_CURRENT.LOG.
==================== ERROR =============================
Press any key to continue . . .
and in my OXE_BACKUP_CURRENT.LOG:
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Aug 1 12:29:11 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1337M/2045M, Ph+PgF:2847M/3938M, VA:2003M/2047M
Starting with debugging turned off
connected to target database: XE (DBID=2509285891, not open)
RMAN> set echo on;
2> shutdown immediate;
3> startup mount;
4> configure controlfile autobackup format for device type disk clear;
5> configure retention policy to redundancy 2;
6> configure controlfile autobackup on;
7> sql "create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile";
8> backup as backupset device type disk database;
9> configure controlfile autobackup off;
10> alter database open;
11> delete noprompt obsolete;
12>
echo set on
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 171967884 bytes
Database Buffers 423624704 bytes
Redo Buffers 2904064 bytes
RMAN configuration parameters are successfully reset to default value
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters are successfully stored
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
sql statement: create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile
Starting backup at 01-AUG-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=36 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/01/2007 12:29:39
RMAN-10035: exception raised in RPC:
ORA-19583: conversation terminated due to error
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 651
RMAN-10031: RPC Error: ORA-19583 occurred during call to DBMS_BACKUP_RESTORE.BACKUPDATAFILE
Recovery Manager complete.
Message was edited by:
Bawasi

Bawasi,
I was trying to backup my database because I know that there is something wrong with my Oracle 10g Express and I need to reinstall it.
You should make a backup before something went wrong... What's wrong with your database?
Regards, Marc

BR278E error during backup

HI all,
Our database backup was running ok for the passed 3 months after the SAP system was installed. Recently, I keep getting BR278E error during backup. Below are the error message:
BR0202I Saving init_ora
BR0203I to /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C cd /oracle/PRD/102_64/dbs && /usr/sap/PRD/SYS/
exe/run/brtools -f printarg initPRD.ora spfilePRD.ora | LANG=C cpio -ovB > /dev/
rmt/0mn':
initPRD.ora
spfilePRD.ora
^GEnd of medium on "output".
To continue, type device/file name when ready.
The SAP system is on Solaris/Oracle running ECC6.0. LTO-4 tape drive is used for the backup. Tape_size in initSID.sap is set to 720000M. Current database size is 128Gb.
What is the reason for the backup failure?
Rdgs,
Lim

Hi,
This is my initSID.sap
@(#) $Id: //bas/640_REL/src/ccm/rsbr/initSUN.sap#4 $ SAP
backup mode [all | all_data | full | incr | sap_dir | ora_dir
| <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
default: all
backup_mode = all
restore mode [all | all_data | full | incr | incr_only | incr_full
| <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
redirection with '=' is not supported here - use option '-m' instead
default: all
restore_mode = all
backup type [offline | offline_force | offline_standby | offline_split
| offline_mirror | offline_stop | online | online_cons | online_split
| online_mirror
default: offline
backup_type = online
backup device type
[tape | tape_auto | tape_box | pipe | pipe_auto | pipe_box | disk
| disk_copy | disk_standby | stage | stage_copy | stage_standby
| util_file | util_file_online | rman_util | rman_disk | rman_stage
| rman_prep]
default: tape
backup_dev_type = tape
backup root directory [<path_name> | (<path_name_list>)]
default: $SAPDATA_HOME/sapbackup
backup_root_dir = /oracle/PRD/sapbackup
stage root directory [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
stage_root_dir = /oracle/PRD/sapbackup
compression flag [yes | no | hardware | only]
default: no
compress = hardware
compress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<target_file_name> = <source_file_name>.Z
for compress command the -c option must be set
recommended setting for brbackup -k only run:
"compress -b 12 -c $ > $"
no default
compress_cmd = "compress -b 12 -c $ > $"
uncompress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<source_file_name> = <target_file_name>.Z
for uncompress command the -c option must be set
no default
uncompress_cmd = "uncompress -c $ > $"
directory for compression [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
compress_dir = /oracle/PRD/sapreorg
brarchive function [save | second_copy | double_save | save_delete
| second_copy_delete | double_save_delete | copy_save
| copy_delete_save | delete_saved | delete_copied]
default: save
archive_function = copy_delete_save
directory for archive log copies to disk
default: first value of the backup_root_dir parameter
archive_copy_dir = /oracle/PRD/sapbackup
directory for archive log copies to stage
default: first value of the stage_root_dir parameter
archive_stage_dir = /oracle/PRD/sapbackup
new sapdata home directory for disk_copy | disk_standby
no default
new_db_home = /oracle/C11
stage sapdata home directory for stage_copy | stage_standby
default: value of the new_db_home parameter
stage_db_home = /oracle/C11
original sapdata home directory for split mirror disk backup
no default
orig_db_home = /oracle/C11
remote host name
no default
remote_host = <host_name>
remote user name
default: current operating system user
remote_user = <user_name>
tape copy command [cpio | cpio_gnu | dd | dd_gnu | rman | rman_dd]
default: cpio
tape_copy_cmd = dd
disk copy command [copy | dd | dd_gnu | rman]
default: copy
disk_copy_cmd = copy
stage copy command [rcp | ftp]
default: rcp
stage_copy_cmd = rcp
flags for cpio output command
default: -ovB
cpio_flags = -ovB
flags for cpio input command
default: -iuvB
cpio_in_flags = -iuvB
flags for cpio command for copy of directories to disk
default: -pdcu
cpio_disk_flags = -pdcu
flags for dd output command
default: "obs=16k"
recommended setting:
Unix: "obs=nk bs=nk", example: "obs=64k bs=64k"
NT: "bs=nk", example: "bs=64k"
dd_flags = "obs=64k bs=64k"
flags for dd input command
default: "ibs=16k"
recommended setting:
Unix: "ibs=nk bs=nk", example: "ibs=64k bs=64k"
NT: "bs=nk", example: "bs=64k"
dd_in_flags = "ibs=64k bs=64k"
copy_in_cmd = "dd ibs=64k obs=8k if=$"
rewind command
rewind = "mt -f $ rewind"
rewind and set offline command
rewind_offline = "mt -f $ offline"
tape positioning command
tape_pos_cmd = "mt -f $ fsf $"
recommended values for tape devices with hardware compression:
tape_size = 720000M
address of backup device without rewind
tape_address = /dev/rmt/0mn
address of backup device with rewind
tape_address_rew = /dev/rmt/0m
volumes for brarchive
volume_archive = (PRDA09, PRDA10)
volumes for brbackup
volume_backup = (PRDB09, PRDB10)
expiration period for backup volumes in days
expir_period = 5
recommended usages of backup volumes
tape_use_count = 260
Edited by: limws1 on Aug 27, 2011 4:44 AM

RMAN Backup error with Symantec Backup Tool

Hi
My Environment
OS Windows server 2003 R2
Oracle 10G R2 10.2.03 2 node RAC
When i am taking backup maually in the command prompt with RMAN, it is successful, but when we are trying from Symantec Backup tool we are getting errors like
RMAN 03002 failur of Backup lus archivelog is problem,
RMAN 10015 error compiling PL/SQL programme
RMAN 10033 error during compilation of job step2
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer)
So please tell me why its giving the error with Symatntec and why when i am doing manually it is successfull.
What could be the solution, please we are taking daily and weekly backups with Symantec on HP tape library. Please suggest me to the needful.
Immediate reply highly apperciated
Thanks
Edited by: 873393 on Apr 17, 2012 10:09 AM

Hello,
Ora 00603 Oracle server session terminate by fatal error.
Ora 004030 out of process memory when trying to allocate 4120 bytes(pl/sql) MPCODE,BAMMA, BAM Buffer) The ORA-04030 error message is interesting. It means that the OS doesn't have enough memory for Oracle.
So you may monitore the Memory usage of the Server during the Symantec Backup, and check for any activity. May be the Symantec Backup runs when other Batch Jobs use already a lot of memory . You may also have to extend the RAM of the Server.
Also, check for the RMAN script used by Symantec and compare with the "manual" script. May be, some options are used with Symantec and consume more resources on the Server.
Hope this help.
Best regards,
Jean-Valentin

Error while taking RMAN back up - RMAN-03009: failure of backup command ..

Hi Experts,
I am trying to take RMAN back up but at the end I get this error message.. I found a solution at http://www.oracle-base.com/articles/9i/RecoveryManager9i.php
But this is of oracle 9i. Can I use it on 10g too ?
So is this Step correct ?
1) First create a user to hold the recovery catalog:
a) CONNECT sys/password@w2k1 AS SYSDBA
b) GRANT connect, resource, recovery_catalog_owner TO rman;
2) Then create the recovery catalog:
a) C:>rman catalog=rman/rman@w2k1
b) RMAN> create catalog tablespace "RMAN";
c) RMAN> exit
3) Register Database
a) C:>rman catalog=rman/rman@w2k1 target=sys/password@w2k2
b) RMAN> register database;
c) Existing user-created backups can be added to the catalog using: (*So far no Back up taken so I guess this step can be ignored*)
i) RMAN> catalog datafilecopy 'C:\Oracle\Oradata\TSH1.dbf';
ii) RMAN> catalog archivelog 'log1', 'log2', 'log3', ... 'logN';
4) Full Backup Configuration
RMAN> configure retention policy to recovery window of 7 days;
RMAN> configure default device type to disk;
RMAN> configure controlfile autobackup on;
RMAN> configure channel device type disk format 'C:\Oracle\Admin\W2K2\Backup%d_DB_%u_%s_%p';
5) Full back up
RMAN> run {
backup database plus archivelog;
delete noprompt obsolete;
6) RMAN> resync catalog;
Starting backup at 15-MAY-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00006 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\DM_MENTOR200
60430230208_DB.DBF
input datafile fno=00002 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\UNDOTBS01.DB
F
input datafile fno=00007 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\DM_MENTOR200
60430230208_IND.DBF
input datafile fno=00001 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\SYSTEM01.DBF
input datafile fno=00003 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\SYSAUX01.DBF
input datafile fno=00005 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\EXAMPLE01.DB
F
input datafile fno=00004 name=C:\ORACLE\PRODUCT\10.1.0\ORADATA\ZUMA\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 15-MAY-10
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/15/2010 05:11:
03
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 2147483648 limit
continuing other job steps, job failed will not be re-run
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
channel ORA_DISK_1: starting piece 1 at 15-MAY-10
channel ORA_DISK_1: finished piece 1 at 15-MAY-10
piece handle=C:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ZUMA\BACKUPSET\2010_05
_15\O1_MF_NCNNF_TAG20100515T045136_5YX3TTFT_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:17
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 05/15/2010 05:11:21
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/15/2010 05:11:
03
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 52428800 bytes disk space from 2147483648 limit
RMAN>
Thanks & Regards,
Ranjith John

Provided you consult the 10g RMAN documentation and the online error documentation: yes.
But apparently you didn't check documentation, not even the error messages!!!!! Why?
You are backing up to the Flash Recovery Area, and the error messages mean too much space is occupied.
How to configure the Flash Recovery Areea is fully documented in the Backup and Recovery manual for 10g at http://tahiti.oracle.com
READ IT.
Please do not ask a volunteer to abstract it.
Sybrand Bakker
Senior Oracle DBA

RMAN error during auto backup

Similar Messages

Maybe you are looking for