Rman error when taking backup archivelog all delete input

archive log filename=+FRA01/osondemand/archivelog/2012_02_27/thread_2_seq_15028.7182.776323223 recid=122876 stamp=77
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/27/2012 05:23:14
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 3: ORA-00603: ORACLE server session terminated by fatal error
ORA-04030: out of process memory when trying to allocate 272 bytes (PL/SQL DIANA,PTG: No
10.2.04
windows
two node rac
please help me with above error
thanks for help

Hi;
Duplicate post
Re: rman error when i am doing backup archivelog delete input
Regard
Helios

Similar Messages

RMAN backup archivelog all delete input

Hello DBAs,
what does this command will do?
RMAN> backup archivelog all delete input;
DN

I have set cron job for RMAN> backup archivelog all delete input; and its work.
But I got following message in my log file.
Please give ur feed back.
Recovery Manager: Release 10.1.0.4.0 - 64bit Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: SIDNAME (DBID=XXXXXXXX)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 10-FEB-06
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=269 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=268 devtype=DISK
channel ORA_DISK_1: starting compressed archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=5701 recid=2412 stamp=581958928
input archive log thread=1 sequence=5702 recid=2413 stamp=581961105
input archive log thread=1 sequence=5703 recid=2414 stamp=581964532
input archive log thread=1 sequence=5704 recid=2415 stamp=582025325
input archive log thread=1 sequence=5705 recid=2416 stamp=582029976
input archive log thread=1 sequence=5706 recid=2417 stamp=582031922
channel ORA_DISK_1: starting piece 1 at 10-FEB-06
channel ORA_DISK_2: starting compressed archive log backupset
channel ORA_DISK_2: specifying archive log(s) in backup set
input archive log thread=1 sequence=5707 recid=2418 stamp=582037207
input archive log thread=1 sequence=5708 recid=2419 stamp=582038471
input archive log thread=1 sequence=5709 recid=2420 stamp=582043538
input archive log thread=1 sequence=5710 recid=2421 stamp=582048518
input archive log thread=1 sequence=5711 recid=2422 stamp=582055205
channel ORA_DISK_2: starting piece 1 at 10-FEB-06
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 02/10/2006 18:00:
12
ORA-19502: write error on file "/u02/backup/backup_6ehb2t97_1_1", blockno 6145 (
blocksize=512)
ORA-27063: number of bytes read/written is incorrect
IBM AIX RISC System/6000 Error: 28: No space left on device
Additional information: -1
Additional information: 1048576
channel ORA_DISK_1 disabled, job failed on it will be run on another channel
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/10/2006 18:00:
12
ORA-19502: write error on file "/u02/backup/6fhb2t97_1_1", blockno 6145
(blocksize=512)
ORA-27063: number of bytes read/written is incorrect
IBM AIX RISC System/6000 Error: 28: No space left on device
Additional information: -1
Additional information: 1048576
channel ORA_DISK_2 disabled, job failed on it will be run on another channel
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 02/10/2006 18:00:
12
ORA-19502: write error on file "/u02/backup/backup_6ehb2t97_1_1", blockno 6145 (
blocksize=512)
ORA-27063: number of bytes read/written is incorrect
IBM AIX RISC System/6000 Error: 28: No space left on device
Additional information: -1
Additional information: 1048576
RMAN>
Recovery Manager complete.
DN

Backup archivelog all delete all input

RMAN> backup archivelog all delete all input;
i have backed up all my archivelogs using the above command, but after the backup archivelogs are not deleted from its default location .ie my default archive location is '/oracle/archive' . After executing the above command, I can see all the archivelogs still available in that location. why is it so
Db:10.2.0
OS: solaris 10
Edited by: user13364377 on Aug 22, 2010 10:44 AM

>
My control_file_record_keep_time is 7 days. My understanding is that when we specify the below command,
Rman>backup archivelog all delete all input;
rman will backup all the archive logs(one copy of each log sequece) from the archive location and then delete all the archive logs from the archive location. is it not correct?
>
That is generally right. But that assumes that RMAN knows about these archivelogfiles. It knows about them because of entries in the controlfile. If they are nolonger present - RMAN will not know them and not Backup & delete them.
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Rman error when i am doing backup archivelog delete input

archive log filename=+FRA01/osondemand/archivelog/2012_02_27/thread_2_seq_15028.7182.776323223 recid=122876 stamp=77
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 02/27/2012 05:23:14
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 3: ORA-00603: ORACLE server session terminated by fatal error
ORA-04030: out of process memory when trying to allocate 272 bytes (PL/SQL DIANA,PTG: No
10.2.04
windows
two node rac
please help me with above error
thanks for help

Hi;
Duplicate post:
rman error when taking backup archivelog all delete input
Please close your othere thread as answered and keep updating your other thread here
Regard
Helios

Error when I backup with rman plus archive log

Hi All,
I tried below command
run {
SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
BACKUP DATABASE INCLUDE CURRENT CONTROLFILE PLUS ARCHIVELOG DELETE ALL INPUT;
and that show below error
archived log file name=+DATA/pimprd/archivelog/pimarch_2_95_698703544.arc RECID=128 STAMP=706186164
archived log file name=+DATA/pimprd/archivelog/pimarch_2_96_698703544.arc RECID=130 STAMP=706186173
Finished backup at 21-DEC-09
ORACLE error from target database:
ORA-03114: not connected to ORACLE
Starting backup at 21-DEC-09
current log archived
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=259 instance=pimdb1 device type=DISK
channel ORA_DISK_1: starting archived log backup set
channel ORA_DISK_1: specifying archived log(s) in backup set
input archived log thread=1 sequence=153 RECID=113 STAMP=705896703
input archived log thread=1 sequence=154 RECID=116 STAMP=705983105
input archived log thread=1 sequence=155 RECID=119 STAMP=706069504
archived log file name=+DATA/pimprd/archivelog/pimarch_2_95_698703544.arc RECID=128 STAMP=706186164
archived log file name=+DATA/pimprd/archivelog/pimarch_2_96_698703544.arc RECID=130 STAMP=706186173
Finished backup at 21-DEC-09
ORACLE error from target database:
ORA-03114: not connected to ORACLE
Starting backup at 21-DEC-09
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-03114: not connected to ORACLE
RMAN-03002: failure of backup plus archivelog command at 12/21/2009 11:00:18
ORA-03114: not connected to ORACLE
There are RAC 11.1.0.6.0 on AIX 5.3 with ASM.
Please advise,
Thank you,
Hiko

็Hi All,
I tried backup archivelog again and show same error,
Line: -----
rman target /
Recovery Manager: Release 11.1.0.6.0 - Production on Mon Dec 21 14:48:29 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: PIMDB (DBID=3834713912)
RMAN> run
2> {
3> backup archivelog all;
4> }
Starting backup at 21-DEC-09
current log archived
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=275 instance=pimdb1 device type=DISK
channel ORA_DISK_1: starting archived log backup set
channel ORA_DISK_1: specifying archived log(s) in backup set
input archived log thread=1 sequence=161 RECID=131 STAMP=706190624
input archived log thread=1 sequence=162 RECID=133 STAMP=706200525
input archived log thread=2 sequence=97 RECID=132 STAMP=706190625
input archived log thread=2 sequence=98 RECID=134 STAMP=706200526
channel ORA_DISK_1: starting piece 1 at 21-DEC-09
channel ORA_DISK_1: finished piece 1 at 21-DEC-09
piece handle=/oradata/backup/pimdb/rman/pimdb_Fulldata_20091221_97_1.bck tag=TAG20091221T144854 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
Finished backup at 21-DEC-09
Starting Control File and SPFILE Autobackup at 21-DEC-09
piece handle=/oradata/backup/pimdb/rman/pimdb_Controlfile_c-3834713912-20091221-02 comment=NONE
Finished Control File and SPFILE Autobackup at 21-DEC-09
ORACLE error from target database:
ORA-03114: not connected to ORACLE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-03114: not connected to ORACLE
RMAN-03009: failure of REFAF command on default channel at 12/21/2009 14:59:33
ORA-03114: not connected to ORACLE
RMAN> exit
Recovery Manager complete.
Line: -----
And I check in alert log file that show below error
Line: -----
Mon Dec 21 14:48:44 2009
Thread 1 advanced to log sequence 163
Current log# 1 seq# 163 mem# 0: +DATA/pimdb/onlinelog/group_1.282.698703549
Mon Dec 21 14:49:17 2009
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x3E00000000] [PC:0x10180AA48, kxfpg1srv()+04e8]
Errors in file /oracle/diag/rdbms/pimdb/pimdb1/trace/pimdb1_ora_5095646.trc (incident=64044):
ORA-07445: exception encountered: core dump [kxfpg1srv()+04e8] [SIGSEGV] [ADDR:0x3E00000000] [PC:0x10180AA48] [Address not mapped to object] []
Incident details in: /oracle/diag/rdbms/pimdb/pimdb1/incident/incdir_64044/pimdb1_ora_5095646_i64044.trc
Mon Dec 21 14:49:31 2009
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x3E00000000] [PC:0x10180AA48, kxfpg1srv()+04e8]
Errors in file /oracle/diag/rdbms/pimdb/pimdb1/trace/pimdb1_m000_1831050.trc (incident=64163):
ORA-07445: exception encountered: core dump [kxfpg1srv()+04e8] [SIGSEGV] [ADDR:0x3E00000000] [PC:0x10180AA48] [Address not mapped to object] []
Incident details in: /oracle/diag/rdbms/pimdb/pimdb1/incident/incdir_64163/pimdb1_m000_1831050_i64163.trc
Mon Dec 21 14:49:33 2009
Trace dumping is performing id=[cdmp_20091221144933]
Mon Dec 21 14:49:34 2009
Sweep Incident[64163]: completed
Mon Dec 21 14:59:33 2009
Process 0x70000020477df88 appears to be hung while dumping
Current time = 1584185732, process death time = 1584124482 interval = 60000
Attempting to kill process 0x70000020477df88 with OS pid = 5095646
OSD kill succeeded for process 70000020477df88
Line: -----
Please advice,
Thank you
Hiko

Backup archivelog all and backup archivelog in rman back

Hi,
Whats the difference between backup archivelog all and backup archivelog in rman backup.

Please find below explanation from the online documentation;
+"+
+If you specify BACKUP ARCHIVELOG ALL, then RMAN backs up exactly one copy of each distinct log sequence number. For example, if you archive to multiple destinations, RMAN backs up one copy of each log sequence number—not each copy of each log sequence number. For other commands, such as DELETE ALL does refer to every log, even duplicate log sequences.+
+"+
Hope That Helps.
Ogan
Edited by: Ogan Ozdogan on 27.Tem.2010 00:38
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta007.htm#RCMRF107

Backup archivelog all (RMAN)

For the first time Rman archive log backup, say for example log sequence 100 through 200 was backed.
After few days, log sequence has increased to 267, now if i run the same archive log backup command will rman backup 100 through 267 or 201 through 267. Am bit confused with this.
Help me
kumareshan

So i need to configure retention policy (Recovery window or redundancy) so that after certain period of time entry will be removed from the catalog so that RMAN will not backup the archived logs again.. Am i right??Partially.
You need to configure the retention policy AND add a instructions to delete the backuped archivelogs, with 'delete archivelog (all)'.

Backup archivelog all

Hi,
Whats the difference between backup archivelog all and backup archivelog using rman.

I think i have answered such question before, strange :)
Anyway please find below link to read something about the backup command;
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta007.htm#RCMRF107
+"+
+If you specify BACKUP ARCHIVELOG ALL, then RMAN backs up exactly one copy of each distinct log sequence number. For example, if you archive to multiple destinations, RMAN backs up one copy of each log sequence number—not each copy of each log sequence number. For other commands, such as DELETE ALL does refer to every log, even duplicate log sequences.+
+"+
Hope That Helps.
Ogan

[SOLVED] dbus error when taking a screenshot

I can't take screenshots with the Gnome3 screenshot program. When I try to save a screenshot, I get this error message:
Error while saving screenshot.
Impossible to save the screenshot to file:///home/some/directory.
Error was GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process /usr/bin/nautilus exited with status 1.
Please choose another location and retry.
I found a thread with a similar problem (dbus error when taking a screenshot; the error message is different though) providing a solution, but I can't try that solution because I don't have a /etc/X11/xorg.conf.d/20-intel.conf file.
How can I fix this?
Last edited by cryptkeeper (2012-03-05 08:12:36)

Damn, I found the solution (or better: source) of the problem... The error messages states that /usr/bin/nautilus exits with error something-something, and after thinking about that for some seconds it came to my mind that I replaced /usr/bin/nautilus with a softlink (ln -s) to /usr/bin/thunar because I didn't find a better way to totally replace Nautilus with Thunar...
Thanks for trying to help anyway!

Got RMAN error when running RMAN backup of archivelogs on physical standby database

Got below error when running RMAN backup of datafiles and archivelogs on physical standby database.
RMAN-06820: WARNING: failed to archive current log at primary database
ORACLE error from target database:
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-00942: table or view does not exist
Could anyone help me? Thanks,

Hello;
When you connect RMAN to the source database as TARGET you must specify a password even if RMAN uses operating system authentication.
So the errors ORA-17627 and ORA-00942 appear to be cause and effect.
What version of Oracle? ( 11.2.0.4 according to the tag )
Can you post your backup script?
Best Regards
mseberg
Update
According to :
Database Error Messages 11g Release 2 (11.2) E17766-03
RMAN-06820: WARNING: failed to archive current log at primary database
Cause: An attempt to switch the archived log at the primary database failed.
So I would check my Primary alert log for an issue.
Message was edited by: mseberg

Error while taking backup through RMAN in 10g XE

While taking backup through RMAN in XE instance , an error comes out.
The contents of oxe_backup_current file is as below :
XE Backup Log
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 6 15:49:51 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: XE (DBID=2635631092)
RMAN>
echo set on
RMAN> shutdown immediate;
using target database control file instead of recovery catalog
database closed
database dismounted
Oracle instance shut down
RMAN> startup mount;
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area     805306368 bytes
Fixed Size                     1261444 bytes
Variable Size                209715324 bytes
Database Buffers             591396864 bytes
Redo Buffers                   2932736 bytes
RMAN> configure retention policy to redundancy 2;
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters are successfully stored
RMAN> configure controlfile autobackup format for device type disk clear;
RMAN configuration parameters are successfully reset to default value
RMAN> configure controlfile autobackup on;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
RMAN> sql "create pfile=''/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora'' from spfile";
*sql statement: create pfile=''/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora'' from spfile*
*RMAN-00571: ===========================================================*
*RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============*
*RMAN-00571: ===========================================================*
*RMAN-03009: failure of sql command on default channel at 07/06/2011 15:50:57*
*RMAN-11003: failure during parse/execution of SQL statement: create pfile='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/dbs/spfile2init.ora' from spfile*
*ORA-27086: unable to lock file - already in use*
*Linux Error: 11: Resource temporarily unavailable*
Additional information: 8
Additional information: 16476
RMAN> backup as backupset device type disk database;
Starting backup at 06-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=102 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00003 name=/usr/lib/oracle/xe/oradata/XE/sysaux.dbf
input datafile fno=00005 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_log01.dbf
input datafile fno=00006 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_lrg01.dbf
input datafile fno=00001 name=/usr/lib/oracle/xe/oradata/XE/system.dbf
input datafile fno=00009 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_log01.dbf
input datafile fno=00010 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_lrg01.dbf
input datafile fno=00002 name=/usr/lib/oracle/xe/oradata/XE/undo.dbf
input datafile fno=00004 name=/usr/lib/oracle/xe/oradata/XE/users.dbf
input datafile fno=00008 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_sml01.dbf
input datafile fno=00012 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_sml01.dbf
input datafile fno=00011 name=/usr/lib/oracle/xe/oradata/XE/ftress_indx_mdm01.dbf
input datafile fno=00007 name=/usr/lib/oracle/xe/oradata/XE/ftress_data_mdm01.dbf
channel ORA_DISK_1: starting piece 1 at 06-JUL-11
channel ORA_DISK_1: finished piece 1 at 06-JUL-11
piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T155057_718dw649_.bkp tag=TAG20110706T155057 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:15
Finished backup at 06-JUL-11
Starting Control File and SPFILE Autobackup at 06-JUL-11
piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755797849_718dwofy_.bkp comment=NONE
Finished Control File and SPFILE Autobackup at 06-JUL-11
RMAN> configure controlfile autobackup off;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
new RMAN configuration parameters are successfully stored
RMAN> alter database open;
database opened
RMAN> delete noprompt obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 2
using channel ORA_DISK_1
Deleting the following obsolete backups and copies:
Type                 Key    Completion Time    Filename/Handle
Backup Set           3      06-JUL-11
Backup Piece       3      06-JUL-11          /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T133443_7184wr4d_.bkp
Backup Set           4      06-JUL-11
Backup Piece       4      06-JUL-11          /usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755789675_7184x7fp_.bkp
deleted backup piece
backup piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/backupset/2011_07_06/o1_mf_nnndf_TAG20110706T133443_7184wr4d_.bkp recid=3 stamp=755789684
deleted backup piece
backup piece handle=/usr/lib/oracle/xe/app/oracle/flash_recovery_area/XE/autobackup/2011_07_06/o1_mf_s_755789675_7184x7fp_.bkp recid=4 stamp=755789699
Deleted 2 objects
RMAN>
Recovery Manager complete.
RMAN error: See log for details.

I think it is trying to overwrite exiting file. Either give a different name or cleanup the files in preferred location.

Error /dev/rmt/0mn: cannot create when taking backup

Hello Gurus
I am getting the following error when I am trying to take SAP system backup on tape :-
BR0278E Command output of 'LANG=C cd /oracle/SOL/sapbackup && echo .tape.hdr0 /usr/sap/SOL/SYS/exe/run/brtools -f detach LANG=C cpio -ovB > /dev/rmt/0mn':
sh: /dev/rmt/0mn: cannot create
BR0280I BRBACKUP time stamp: 2009-07-22 12.12.26
BR0279E Return code from 'LANG=C cd /oracle/SOL/sapbackup && echo .tape.hdr0 /usr/sap/SOL/SYS/exe/run/brtools -f detach LANG=C cpio -ovB > /dev/rmt/0mn': 1
BR0222E Copying /oracle/SOL/sapbackup/.tape.hdr0 to/from /dev/rmt/0mn failed due to previous errors
BR0219E Initialization of volume SCRATCH in device /dev/rmt/0mn failed
I checked the permissions of brtools as per SAP note 113747. I have set the correct permissions as per note.
Server details :-SunOS cpdsol 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V440
Please help mee
Sarin

Hello
The permissions of brtools
cpdsol:soladm 25% ls -al br*
-rwsrwxr-x   1 orasol   sapsys   5758992 Jun 12 15:48 brarchive
-rwsrwxr-x   1 orasol   sapsys   5920384 Jun 12 15:48 brbackup
-rwsrwxr-x   1 orasol   sapsys   7786120 Jun 12 15:48 brconnect
-rwxr-xr-x   1 soladm   sapsys   6281792 Jun 12 15:48 brrecover
-rwxr-xr-x   1 soladm   sapsys   2482144 Jun 12 15:48 brrestore
-rwxr-xr-x   1 soladm   sapsys   8107904 Jun 12 15:48 brspace
-rwxr-xr-x   1 soladm   sapsys   3097984 Jun 12 15:48 brtools
I also executed the command suggested by Joe
cpdsol:soladm 29% grep tape_address /oracle/SOL/102_64/dbs/initSOL.sap | cat -ve
tape_address = /dev/rmt/0mn$
default: value of the tape_address parameter$
tape_address_arch = /dev/rmt/0mn$
tape_address_rew = /dev/rmt/0m$
default: value of the tape_address_rew parameter$
tape_address_rew_arch = /dev/rmt/0m$
default: value of the tape_address_rew parameter$
tape_address_ctl = /dev/...$
default: value of the tape_address_rew_arch parameter$
tape_address_ctl_arch = /dev/...$
Does the $ at the end of the parameter have any significance ??
Sarin

RMAN error during auto backup

Hello,
We have crontab to take archivelog backup at every hour at 10 mins. mon-sat incremental and sunday level 0 backup. Today morning I got following error in the log file. (RAC DB 10.2.0.5, OS=RHL)
RMAN-00571:
===========================================================brRMAN-00569: ===============
ERROR MESSAGE STACK FOLLOWS ===============brRMAN-00571:
===========================================================brRMAN-03002: failure of backup
plus archivelog command at 05/21/2012 05:55:59brRMAN-03014: implicit resync of recovery
catalog failedbrRMAN-06004: ORACLE error from recovery catalog database: ORA-03113:
end-of-file on communication channelbrORACLE error from recovery catalog database:
ORA-03114: not connected to ORACLEbrRMAN-00571:
===========================================================brRMAN-00569: ===============
ERROR MESSAGE STACK FOLLOWS ===============brRMAN-00571:
===========================================================brRMAN-03002: failure of
allocate command at 05/21/2012 05:56:00brRMAN-06004: ORACLE error from recovery catalog
database: ORA-03114: not connected to ORACLElist backup of archivelog all; .. while connecting to rman catalog..following are the few lines from the output.
I found almost related MOS note but unfortunately, I am still unable to understand what actually happened or what is trying to be explain in this particular note. RMAN Backup fails with error ORA-3114 [ID 1264084.1]. One more important question for my concern is that if the command failed for example as in my case. The next time when backup command started to take incremental backups, will it cover or backup those archivelog which were not backed up because of the above error?
List of Archived Logs in backup set 2481637
Thrd Seq     Low SCN    Low Time            Next SCN   Next Time
1    67414   27261392224 21-05-2012 05:10:22 27261405217 21-05-2012 05:55:55
1    67415   27261405217 21-05-2012 05:55:55 27261422601 21-05-2012 06:10:07
2    70049   27261392222 21-05-2012 05:10:20 27261405224 21-05-2012 05:55:57
2    70050   27261405224 21-05-2012 05:55:57 27261422604 21-05-2012 06:10:08Thank you.
Best Regards.

A "BACKUP ARCHIVELOG" is not an "Incremental Backup" (ergo, the question of "differential" or "cumulative" doesn't arise).
It is a Backup of the ArchiveLogs specified in archlogspecifier . Since you have specified "ALL" it will attempt to backup all known archivelogs that have not been deleted. The "DELETE ALL INPUT" will delete the files after they have been successfully backed up. If the backup fails, the DELETE is not executed. Therefore, at the next execution, the same (and newer) ArchiveLogs will get backed up.
Why don't you maintain a log of the RMAN Backup run (either with "SPOOL LOG TO .." in the RMAN script or by redirecting STDOUT and STDERR to a custom log file).
Hemant K Chitale

Error when scheduling backup job in OEM

We have Oracle 11.2 RAC on Redhat Linux. I was creating an customized backup job and get the errorsORA-01476: divisor is equal to zero
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7544
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7699
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8211
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8342
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8503
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8570
ORA-06512: at "SYSMAN.MGMT_JOBS", line 273
ORA-06512: at "SYSMAN.MGMT_JOBS", line 86
ORA-06512: at line 1 The backup command is created by OEM as backup incremental level 0 cumulative device type disk filesperset = 5 tag '%TAG' section size 500 M database;
backup device type disk filesperset = 500 tag '%TAG' section size 500 M archivelog all not backed up;
allocate channel for maintenance type disk;
delete noprompt obsolete device type disk;
release channel; Actually using other ommand also get the same error.
What is wrong? I scheduled backup job before on this server and it worked.

This may be due to that the schedule frequecy is not set. Make sure Frequency Type and Repeat Every boxes get filled properly.

RMAN error when backing up in another server

I have 2 server prod and backprod. I don't have a sufficient space to run rman backup on the production server and I try to run rman in the backprod server and I receive the following error message.
$rman target sys/sys@prod nocatalog;
RMAN> run {
allocate channel d1 type disk;
BACKUP format '/data2/backup/bk_%s_%p_%t' TABLESPACE test_rman;
release channel d1;
allocated channel: d1
channel d1: sid=73 devtype=DISK
Starting backup at 02-MAY-07
channel d1: starting full datafile backupset
channel d1: specifying datafile(s) in backupset
input datafile fno=00101 name=/data5/abillity/telma/test_rman_01.dbf
channel d1: starting piece 1 at 02-MAY-07
released channel: d1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on d1 channel at 05/02/2007 09:54:58
ORA-19504: failed to create file "/data2/backup/bk_288_1_621510902"
ORA-27040: skgfrcre: create error, unable to create file
IBM AIX RISC System/6000 Error: 2: No such file or directory
The directory /data2/backup exist in backprod and I have a right on this backprod.
Any helps?

I can create a file in this directory.
This directory doesn't exist on the prod server but I want that the file backup reside in backprod.
When I try to run the backup on windows server, there was no error message but the file backup is create on the prod server in a default directory $ORACLE_HOME/dbs.
What should I to create this backup file on a remote machine?
Regards

Rman error when taking backup archivelog all delete input

Similar Messages

Maybe you are looking for