RMAN to disk script - how to get the hostname into the directory?
I see you can get the Oracle SID in there but how to get the hostname?
We have a NFS device where the directory is
/backups/<hostname>/rman
Ideas?
This is not a unix script, ideally its run thru OEM.
You never mentioned a version.
Version is always important.
From 9i and higher you don't need to allocate a channel, and you can CONFIGURE the default channels.
You can also include a format specifier in the configuration command.
This needs to be done only once.
Apart from that: with that number of databases one would probably create a catalog and work with stored scripts, which can be called from a generic RMAN job.
Stating 'it isn't possible' is too early, especially as you are scarce on information.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
PDF: How to get date/time into the heading of a FOP/PDF file?
Hi!
What changes do I need to make to the PDF report template or what else can I put in the heading block of the "Print" page so that it will include the date and time the PDF was generated?
Also how would I add this so that it prints on the bottom of the page like the page number?
Thanks in advance for any tips, tricks, ideas, examples, etc.!
Dave VenusHi!
Perhaps I missed this some place but you can get the value of a page item or application item into the header or footer of a (FOP) PDF report by using a "&<item>." format substitution string. For example I have a 1 time application process that puts todays date in an application item named F106_SYSDATE (F106_ is the application id). Then in my headers I use:
XXXX Report on: &F106_SYSDATE.
Simple. Works great! And better yet my users are a little happier! :)
Thank for everyone's help and suggestions!
Dave Venus -
Mail Receiver and Attachment Issue - how to get an attachment into the body
I have an abap proxy that sends a simple message to XI with a pdf attachment. XI maps the xml message to the Mail Adapters Mail Package format.
To have the email sent with the PDF attachment I must click the "keep attachments" option. However this also has the side-effect of making the message payload an attachment as well (seems silly?). Therefore I get an email with two attachments: one is the PDF and the other is the plain text that should be in the email body.
The question is: How do I get that plain text attachment back into the Message Body ? I have tried all combinations of the MessageTranformBean and the PayloadSwapBean with no luck.
I can easily change the names of the attachments with the MessageTransformBean but if I set the text attachment to Transform.ContentDisposition inline, it still just comes out as an attachment. And, if I use the payloadswapbean the adapter log says it corectly swapped the right payload however the email still comes out with the text as an attachment!!
Any ideas on how I can do this? Is it a bug in the module beans?
(I'm using MS Outlook as the email client.)
Maybe I need to write my own module bean to do this... If I set keep attachments to OFF, can I still set the PDF attachment with my own modules (the reason I ask this is that with keep-attachment OFF, the message body correctly has the text in it...
Regards,
Jason.
Edited by: Jason Scott on Mar 6, 2008 3:22 AMHi,
Check these
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
Regards
Seshagiri -
How to get data dynamically into the input form fields.
hey guys,
I have created an input form in VC and it has 2 fields which r 'drill-down' type.Now what i want is that the entries for the fields should come automatically on deployment in the portal.what i mean is that e.g. u have a field 'location' and it is drill down type. Now when u run the model , in the input form the 'location' field entries should be populated automatically i.e the entries should b fetched from the server directly.If u guys have any idea then plz help me.I m very liberal in awarding points.Hi Anshul,
1.Create an form in your workarea.
2.Double click on the form element.
3.Add an dropdown component by clicking the Add button(+)
4..Go through the below link to populate values in it,
http://help.sap.com/saphelp_nw04s/helpdata/en/bf/39becc90824d4d999eb05336345e5e/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/96/c33a3382914f6d8aeba11413e3e356/frameset.htm -
How to get a HOSTNAME inserted into a depolyment.
Hello all,
I have a WINDOWS7 .wim file that was created for a specific use. I need to put the HOSTNAME into the image upon deployment.
I have read all about OSDComputerName, and I have that task var in the sequence. It prompts me for the task var, but after the O/S install is finsihed and rebooting, the HOSTNAME is the same as the original image. I am stumped. Everything
I've tried will not change the HOSTNAME.
I have not sysprepped the .wim file since SCCM is supposed to do it for me..
I just want to squirt out the .wim in it's current form, and just change the hostname... SCCM is giving me fits trying to do this.. In XP is was easy with WDS, since I had a mini-setup screen. Windows 7 not so much...
Thanks
Warren Harris
City of Dallas Radioshop.I am hesitant to use the unattend.xml file. I have had bad luck with it... Even though I use the windows SIM to create it. it resets the parameters ...
Heres the copy of unattend that I use.
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="generalize">
<component name="Microsoft-Windows-Security-SPP" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipRearm>1</SkipRearm>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SkipAutoActivation>true</SkipAutoActivation>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<CopyProfile>false</CopyProfile>
<ShowWindowsLive>false</ShowWindowsLive>
<TimeZone>Central Standard Time</TimeZone>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-us</InputLocale>
<SystemLocale>en-us</SystemLocale>
<UILanguage>en-us</UILanguage>
<UserLocale>en-us</UserLocale>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<OOBE>
<HideEULAPage>true</HideEULAPage>
<HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<SkipMachineOOBE>true</SkipMachineOOBE>
<SkipUserOOBE>true</SkipUserOOBE>
</OOBE>
<WindowsFeatures>
<ShowMediaCenter>false</ShowMediaCenter>
<ShowWindowsMail>false</ShowWindowsMail>
<ShowWindowsMediaPlayer>false</ShowWindowsMediaPlayer>
</WindowsFeatures>
<RegisteredOrganization>City of Dallas</RegisteredOrganization>
<RegisteredOwner>Dallas FIRE</RegisteredOwner>
<TimeZone>Central Standard Time</TimeZone>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog:d:/sources/install_windows 7 enterprise.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend> -
HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?
Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try. I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
Thanks for any help!If you have a time machine back up of your current drive you can do this
Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it. -
How to get maximal value from the data/class for show in Map legend
I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomouse this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01 -
i deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx
if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown
-
How to get Open Balance for the year and Total Ending Balance?
For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM -
how do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created
Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve -
I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections. I need to be able access files without going to acrobat.com. Help!!!@
Post the PDF files to a web site. The browse to them in Safari on the iPad. When you Open the files specify the Open to occur in Adobe Reader. Then you can have/Save them in your Documents folder on the iPad. An iPad has limited access to files otherwise.
-
I update my IPhone4 to IOS6 from IOS4.3.3. My all songs are missing in the Iphone4. How to get those songs into my Iphone from ITunes. Even after sync also not coming to IPhone.
The iphone is not storage/backup device.
The sync is one way - computer to iphone.
The only exception is itunes purchases. File>Devices>Transfer Purchases
You should copy everything from your old computer, or your backup copy of your old computer, to your new one. -
How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)
Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then. -
How to get boot camp in the emac
how to get boot camp in the emac
Furthermore, eMacs can only emulate the Windows environment, whereas Intel CPU Macs including the iMac you have running 10.6.8 can virtualize Windows. Emulation is a poor man's solution, because software is used to replace functions that normally take place with hardware. You can use the iMac to do any data conversion before it gets sent back to the eMac over a network. See my FAQ* regarding Windows on the Mac:
http://www.macmaps.com/macosxnative.html#WINTEL -
Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?
The obvious answer I think is that maybe you are not entering the letters and numbers correctly. I almost never get it right the first time when I use a gift card.
Try entering the code again - slowly and methodically. If it still doesn't work - look here for help.
http://support.apple.com/kb/TS1292
One final thought - if you are using a gift card that was purchased in another country - say like you have a Canada gift card and you live in the U.S. - that card will not work in the U.S. iTunes store.
Maybe you are looking for
-
Playing FLV in a layer - control problems
I have several FLV files that I need to play in a layer that is hidden when page loads. If I set 'autoplay' in the parameters for the FLV player in my flash file, it of course, starts to play the video when the page loads (but is not seen). Once the
-
Hi Experts, could you please tell me, if there are any issues with "Interactive PDF in CRM WEBUI". and please tell me the exact difference between the static PDF and Interactive PDF. Thankyou, raghu.
-
New to jsp...got a checkbox prob
hi, got a bit of a chkbox prob! this is the code i have written: <% int i; for (i = 0; i < 1; i++){ int mess = 0; if (mess >= 0){ mess = mess + 1; %> <td><input type="checkbox" name="<%=mess%>"></td> <%} }
-
Programming restrictions for JCA (Java Connector Architecture)
I need to know programming restrictions for JCA (Java Connector Architecture) from a Client program's perspective. Could somebody help my?
-
Some semi-advanced questions...
Where do I begin? It's been a while since I posted here. I often questioned the language but now found its great use on the web. I have a local team together and we decided to persue Java for a terrific game. It's been a while though, so I have a few