RMS vi error

Hi there
I am simulating a sine wave which is exponential decreasing. I then want to find the RMS and log of this wave. My problem is every now and then an error pops up relating to the RMS vi that I am using. The following is what pops up
" Error -20308 occurred at "ma_ptmFetch.vi" when called from "Cycle Average and RMS 1 chan.vi"
Possible reason(s):
Analysis: The waveform did not cross the mid reference level enough times to perform this measurement. . Check the signal length, reference levels, and ref level units."
I am guessing the reason is that the sine wave is decreasing too much and the values are too small for the calculation of the RMS. The thing is I need to have it decaying fast for my project! Anybody have any ideas??
Thanks
Karen
Attachments:
Final Sim3.vi ‏96 KB

Karen,
The Cycle Average and RMS.vi apparently needs a "cycle" to do an analysis. One of the inputs is cycle number.
I changed to the AC & DC Estimator.vi. It produces very similar results for the first few iterations of the inner loop but does not fail when the signal becomes smaller than the noise.
Run the attached VI with the RMS Select in each state and compare results.
Lynn
Attachments:
Final Sim3.1.vi ‏110 KB

Similar Messages

RMS installation error: JDBC-thin client oracle/jdbc/driver/T2CConnection.getLibraryVersionNumber()

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

Can't match error calc. of rms noise error in NI meas. encyc.

I get the 1 sigma STD based on Lafrance, "Fund Concepts in
Comm. as sigma/ = [{2N (0.5kT)^2}^1/2]/0.5NkT where N = 2BW or = 1/(BW)^0.5 and whereas the meas. encycl. result is 1/[2(BW)^0.5] for a 2 sigma error. Can you help? wouldn't I need 4 1 sec meas.(ex.) for .95 confidence. Also what is the best way to do rms white noise meas. using LV? Thanks. Regards, Jerry

Hi linuxlefty,
/home/tirian/.xinitrc: line 9: exec: wmaker: not found
I think this is the problem , check your .xinitrc file

RMS client error: This service is temporarily unavailable

If users try to consume the document he is getting this error. But if he protect document and then try to consume already protected document, he is able to access it with restricted permission. I did run IRM check, no error. Need help.

I may be not clear on my question. Let me put elaborate more
X user logs into the system and protect the document and provide restricted access to Y users
Y users logs into the system. (He has not authenticated with RMS before)
Y users try to consume doc, but he gets the error message saying Service is unavailable...
Now, Y users try to protect the doc (new), which he is able to do successfully
Y user again try to open the doc which was protected by X, and this time he is able to open doc without any error.
I am facing above scenario on Windows 7 and Windows Vista with office 2010.
However, there is no problem with Windows 8 with Office 2010
I am suspecting this is client issue.

Getting error javax.microedition.rms.RecordStoreException

Hello ..
I am create records in RMS .. and some time i am getting error like ..
javax.microedition.rms.RecordStoreException: error finding first fit block
at javax.microedition.rms.RecordStore.allocateNewRecordStorage(+76)
at javax.microedition.rms.RecordStore.addRecord(+65)
i dont knw why this error is coming and it comes some time not always .. any idea what is the problem with that .. ??

i just added ur code to simple midlet, its working fine.
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.rms.*;
public class Test extends MIDlet
     public Display display;
     public Test()
     try
     display = Display.getDisplay(this);
     catch(Exception e)
     Form form;
     public void startApp()
     form = new Form("Test");
     display.setCurrent(form);
     Store();
     retive();
     RecordStore _rs;
     public void Store()
     try
     byte[] data = "abcd".getBytes();
     if(_rs==null)
     _rs = RecordStore.openRecordStore("x", true);
     _rs.addRecord(data, 0, data.length);
     catch(Exception e)
     System.out.println("e "+e.toString());
     public void retive()
     try
     String temp =new String(_rs.getRecord(1));
     form.append(temp);
     }catch(Exception e)
     public void pauseApp()
     public void destroyApp(boolean unconditional)
}

Cannot find symbol:rms

when I try to include javax.microedition.rms the I get an error that says:
"C:\Documents and Settings\FinalYearJavaProjects\MA\src\Address.java:3: cannot find symbol
symbol : class rms
location: package javax.microedition
import javax.microedition.rms;
1 error"

import java.io.*;
ublic class MyFileReader
public static void main(String args[])
throws IOException
BufferedReader file =
new BufferedReader(new
FileReader("JavaFileReaderTest.dat"));   // Sets up
the reader object which opens the specified file
ing inString;
while((inString = file.readLine()) != null)
// While it's not the end of
the file
System.out.println(inString);
file.close();
/ Closes the file
}Or...
// UIL Computer Science
// Reads from a file
import java.io.*;
public class FileReader
    public static void main(String args[])
    throws IOException
        BufferedReader file =
            new BufferedReader(new java.io.FileReader("JavaFileReaderTest.dat"));   // Sets up the reader object which opens the specified file
        String inString;
        while((inString = file.readLine()) != null)                         // While it's not the end of the file
            System.out.println(inString);
        file.close();                                                       // Closes the file
}Or...
// UIL Computer Science
// Reads from a file
import java.io.*;
public class FileReader extends BufferedReader {
    public FileReader() throws IOException {
        super(new java.io.FileReader("JavaFileReaderTest.dat"));
    public static void main(String args[]) throws IOException {
        FileReader file = new FileReader();
        String inString = null;
        while((inString = file.readLine()) != null) {
            System.out.println(inString);
        file.close();
}Hehehe... c",)

Weird RecordStore error - help...anybody?

I am receiving an error from a command of the following form:
setRecord(1, data, 0, data.length)
where data is a byte array (defined by a toByteArray() from a ByteArrayOutputStream).
The error states:
javax:microedition.rms.RecordStoreException: Error setting record data: java.io.IOException: write exceeds maximum file size.
The thing I find weird is that, when I display the getSize() and getSizeAvailable() on the RecordStore, I get really big numbers, like:
size is 62200
size available is 546972
while my data is small,
data.length = 9536
So I am confused by the "exceeds maximum file size" notice. The data is definitely small enough to fit in what memory I have available. And...Is there a file involved or is something not quite right with the message, which also appears to have the form of two error messages merged as one.
Does anyone have any ideas as to what I am encountering here? Would anyone know of anyway I can track down such a problem? I'm a bit lost as to how to debug this since it seems like there isn't much I can play around with given the somewhat limited amount of things I can do (and mess up) with RecordStores. Could it be a memory leak/overwrite? (I'm not sure that that is too likely, particularly in Java, but I'm at a bit of a loss as to where to find problems to try to get my hands on.)
Thanks for any help, advice or thoughts!

Hi, I'm writing app, which saves images to RS.
public void saveImage(String path) {
        RecordStore rs = null;    // Record store
        String RECORD_STORE = path; // Name of record store
        addImageName(path);
        try {
            rs = RecordStore.openRecordStore(RECORD_STORE, true );
            rs.addRecord(data, 0, data.length);
            System.out.println("data lenght : " + data.length);
            System.out.println("writing finished");
            rs.closeRecordStore();
        catch (Exception e) {
        dpy.setCurrent(l);
    }this works...this methos saved even 25kB...

Exception throw by RMS

Hi all,
I was programing j2me by using: NetBean + Sun wireless Toolkit. When running on emularor, my app perfomce very good. But when I deploy on real device(e.g Samsung B7330 using window mobile) I got so much errors.
So I google and find out: J2ME SDK 3.0 intergrating debug on real device. I setup enviroments and run some sample application, they run smooth. But when I run my app, I got an exception when I try to open RMS
javax.microedition.rms.RecordStoreException: error opening record store fileHere my code:
public void saveProfile() {
        byte[] data = toByteArray();
        try {
            rs = RecordStore.openRecordStore("kunkunProfile", true);
            for (RecordEnumeration e = rs.enumerateRecords(null, null, false); e.hasNextElement();) {
                int id = e.nextRecordId();
                rs.deleteRecord(id);
            rs.addRecord(data, 0, data.length);
            rs.closeRecordStore();
        } catch (Exception ex) {
            System.out.println("Exception in OpenRecordStore..." + ex.getMessage());
            try {
                rs.addRecord(data, 0, data.length);
                rs.closeRecordStore();
            } catch (Exception e) {
            ex.printStackTrace();
    }Can anyone help me?
Sorry for my english, I not good English.

Note: This thread was originally posted in the [Java Programming|http://forums.sun.com/forum.jspa?forumID=31] forum, but moved to this forum for closer topic alignment.

Nokia 6230 Error: allocateNewRecordStorage()

Hi,
when I try to add record to RecordStore I get "javax.microedition.rms.RecordStoreException: error writing new record data"
My simple code is byte[] menuData = new byte[]{1,2,3};;
RecordStore kozaza = RecordStore.openRecordStore("kozaza",true);
kozaza.addRecord(menuData,0,menuData.length);
kozaza.closeRecordStore();and the stackTrace I get is javax.microedition.rms.RecordStoreException: error writing new record data
     at javax.microedition.rms.RecordStore.allocateNewRecordStorage(+137)
     at javax.microedition.rms.RecordStore.addRecord(+66)
     at cz.uturn.vz.database.DBManager.saveTempRecord(+29)
     at cz.uturn.vz.database.PersistedDataInputStream.<init>(+159)
     at cz.uturn.vz.updater.Updater.executeUpdate(+300)
     at cz.uturn.vz.gui.MIDletLauncher.tryToGetMenu(+47)
     at cz.uturn.vz.gui.MIDletLauncher.acquireMenu(+33)
     at cz.uturn.vz.gui.MIDletLauncher.run(+14)
     at cz.uturn.vz.gui.Videozone.startApp(+28)
     at javax.microedition.midlet.MIDletProxy.startApp(+7)
     at com.nokia.mid.impl.isa.ui.MIDletManager.callStartApp(+4)
     at com.nokia.mid.impl.isa.ui.MIDletManager.activateMIDlet(+10)
     at com.nokia.mid.impl.isa.ui.MIDletManager.launchMIDlet(+15)
     at com.nokia.mid.impl.isa.ui.MIDletManager.init(+22)
     at com.nokia.mid.impl.isa.ui.MIDletManager.main(+86)What's the problem ? i write couple of records to different RecordStores before executing this snippet. Can it be that there is limited number of RecordStores on Nokia 6230 ?
Michal

And one more comment. I got the same kind of exception, but with different text "error reading record data" when reading records from RS.
To get around that I close RecordStore and open it again. I don't know what's cause of this exception, but I know that this dirty workaround works.
      String rsName=rs.getName();
      try{
        recordData = rs.getRecord(recID);
      catch (RecordStoreException ex){ // Hack for Nokia 6230
        if (ex.getMessage()!=null && ex.getMessage().equals("error reading record data")){
          boolean closed = false;
          while (!closed) {
            try {
              rs.closeRecordStore(); // it may need to be closed couple of times
            catch (RecordStoreNotOpenException e) {
              closed = true;
          rs = RecordStore.openRecordStore(rsName, true);
          recordData=rs.getRecord(recID);
        else {
          throw ex;
      }It's ugly, but it works.
Michal

How to set up on device debuging with J2ME SDK 3.0 and window mobile 6.5?

I got some infomation about setting up on device debuging in J2ME SDK 3.0 with real device(e.g samsung windown mobile B7330). When I start debuging on device, I got exception when open RMS
javax.microedition.rms.RecordStoreException: error opening record store fileHere my code:
public void saveProfile() {
        byte[] data = toByteArray();
        try {
            rs = RecordStore.openRecordStore("kunkunProfile", true);
            for (RecordEnumeration e = rs.enumerateRecords(null, null, false); e.hasNextElement();) {
                int id = e.nextRecordId();
                rs.deleteRecord(id);
            rs.addRecord(data, 0, data.length);
            rs.closeRecordStore();
        } catch (Exception ex) {
            System.out.println("Exception in OpenRecordStore..." + ex.getMessage());
            try {
                rs.addRecord(data, 0, data.length);
                rs.closeRecordStore();
            } catch (Exception e) {
            ex.printStackTrace();
    }Anybody help me? I am stuck here.

Hi dominikg,
At first, You can try to restart the device-manager from system tray.
If it doesn't help, then try the following:
- stop the device manager
- Remove c:\Docement and Settings\<your User>\javame-sdk folder.
- Ran the device manager from <SDK>/bin directory
- try to debug again.
Did you tried to change port 51307 to another.
Early access build had some problems with device manager, I hope that final release will be better :)
BR,
Igor

Creating RecordStore

I'm having trouble opening a record store file in my midlet application. I'm calling it using a very simple way that should work (according to various samples of code I've seen and the documentation). This is the code, which is inside my MIDlet's startApp() method:
String name = "login";
try {
loginInfo = RecordStore.openRecordStore(name, true);
} catch( RecordStoreException e){
e.printStackTrace();
Everytime I start my application, I get the following error:
javax.microedition.rms.RecordStoreException: error opening record store file
[wtkrun] at javax.microedition.rms.RecordStore.<init>(+372)
[wtkrun] at javax.microedition.rms.RecordStore.openRecordStore(+118)
[wtkrun] at tracking.midlet.DeluxeMIDlet.startApp(+133)
[wtkrun] at javax.microedition.midlet.MIDletProxy.startApp(+7)
[wtkrun] at com.sun.midp.midlet.Scheduler.schedule(+225)
[wtkrun] at com.sun.midp.dev.DevMIDletSuiteImpl.schedule(+7)
[wtkrun] at com.sun.midp.Main.runLocalClass(+20)
[wtkrun] at com.sun.midp.Main.main(+68)
The code I've seen does the exact same thing (except that it works!). I can't figure out what might be going wrong. I'm including the correct libraries (import javax.microedition.rms.*) and using 1.4.1.
Any ideas would be greatly appreciated! Thanks! :)
Adrienne

Thanks for your help. It turns out that the machine I was running it on had the problem. Somehow, I think the installation of the wireless toolkit didn't give me permissions to write data where I needed to. So I wasn't able to create a RecordStore because I couldn't write it to disk. So running it on my local machine, where I had full permissions, solved the entire problem.

Unable to run AD RMS Console because of the error

hi friends
i am new to AD RMS and i have faced a problem at the start :-)
i followed the steps which exist in MSpress 70-640 R2 training kit book to install AD RMS in my win 2008 R2 server. the installation successfully finished, but when i run AD RMS Console i face with this error :
A connection with the specified AD RMS cluster could not be established for the following reason:
The request Failed with http status 401 : Unauthorized.
ensure that your conection is correct prtocol,such as HTTP or HTTPS , and the port number is correct.
my servers are so :
one DC -
one server which i first installed AD CS with WebEnrollment ( so that installed IIS ) and then on this server i installed AD RMS ( as stated in 70-640 R2 )
my there be conflict in my IIS because of installing ADCS with Web Enrollment component and then installing AD RMS ?
anyway how should i get ride of this error ? i can't access inside the AD RMS Console and continue
thanks in advance

Correct. When you install ADRMS there is a local group created called "AD RMS Enterprise Admins". Your account is added to that group. If you do not log off and back on after the installation, OR, if you try to log into the console as a different user than
you installed the role as, you will see that error.
Obviously for you the answer was to log off and back on, but otherwise, make sure the account you are logging in as is added to that local group.
-Jason
hi Jason. thank you for your good explanation
regards

Getting an error while copying pdf file into RMS enabled document library using copyTo() method

In SharePoint 2010, I am trying to copy pdf file programmatically from a non-RMS protected document library into RMS protected library using copyTo() method.
But I am getting an error while doing so. it gives error as mentioned below -
This library does not accept files of the given type. You must either upload a
new, unprotected file that supports rights management or re-upload a document
that was previously downloaded from this library.
Please suggest some solution.
Thanks,

Are You sure that you have give 'PDF' in caps in your program? and check whether you are getting all the datas before calling the method.
in my program, i have used like this and it is working fine for me,
I am getting PDF content from the form...
DATA ls_formoutput     TYPE fpformoutput.
DATA pdf_content        TYPE solix_tab.
DATA lp_pdf_size        TYPE so_obj_len.
DATA lv_mail_title      TYPE so_obj_des.
*Attach the PDF .
      lp_pdf_size = XSTRLEN( ls_formoutput-pdf ).
      pdf_content = cl_document_bcs=>xstring_to_solix(
          ip_xstring = ls_formoutput-pdf ).
      document->add_attachment(
        i_attachment_type     = 'PDF'
        i_att_content_hex     = pdf_content
        i_attachment_size     = lp_pdf_size
        i_attachment_subject = lv_mail_title ) .

Error while upgrading the patch from RMS 13.1.1.1 to RMS 13.1.1.2

Hi,
While upgrading the rms dbschema from 13.1.1.1 to RMS 13.1.1.2 we are getting the following error update ALC_FREIGHT_COST table or view doesnt exist.
We have checked the data model of rms 13.1.1 and rms 13.1.2 and we couldnt find the table "ALC_FREIGHT_COST."
So anybody could give suggestions on this.
Appreciate your help
Thanks,
Suresh

I'd ignore the error for the moment and file an SR with OracleSupport to make them aware of the issue and release a better script - all of this assuming that your 13.1.1 starting point is valid and correctly installed.
Additionally you can locate the SQL upgrade script that is actually trying to do something on the mentioned table, and grasp what it is trying to achieve and how relevant that is for you.
The table exists in our 13.0.3 setup. The release notes of 13.1.0 mention a rework of cost component functionality, so seems like it was deprecated in that release.
Best regards,
Erik

Error occur while protecting the document using RMS sharing application

The set-up in which the error occurs has the following details,
Server name : hcdc1.ad.com
RMS SCP : adrms.ad.com
http:// adrms.ad.com /_wmcs/licensing/license.asmx
http:// adrms.ad.com /_wmcs/certification/certification.asmx
Unable to protect the document and error as "An internall error occured error code 0X8007054F"

Hi,
What Office Suite version you use? If Office 2010, I suggest you uninstall RMS Sharing App and install it once again using following command:
setup.exe /s /configureO2010Admin
After that, run one of the following commands, depending on you operating system:
For Windows 8 and Windows 8.1, 64-bit: x64\aadrmprep.exe /configureO2010 ; 32-bit: X86\aadrmprep.exe /configureO2010
For Windows 7, 64-bit: x64\win7\aadrmpep.exe /configureO2010
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

RMS vi error

Similar Messages

Maybe you are looking for