RoadMap UI Navigation Problem

I'm facing a navigation problem using the roadmap UI in WD4A.
Let's say we have 5 views. The roadmap view is the default view, the other views will be embedded into a view container UI element on the roadmap view. The roadmap UI has 4 steps, one for each view.
V_ROADMAP
V_STEP_1
V_STEP_2
V_STEP_3
V_STEP_4
Now, I need to add navigation buttons (previous & next) to navigate between the roadmap steps.
My question is where should I placed these navigation buttons? On each view or only on the roadmap view.
Personnaly and it think it would make more sense to place them only on the roadmap view.
My problem using this approach is has follow: When you are on v_roadmap on step 1 (V_STEP_1), you click on Next to go to the next view (V_STEP_2), actually the action is trigger in V_ROADMAP so I am not able to validate user input field or obligatory field in V_STEP_1. I would have to call an action from V_STEP_1 in V_ROADMAP so the event handler method WDDOBEFOREACTION will be called. I don't think it's possible. The problem here, is you can click on next and you can go to the next view without filling the obligatory fields.
If I placed my navigation buttons on each view. The advantage is that before triggering an action, I can validate user input field, obligatory field in the method WDDOBEFOREACTION before going to the next step.
The desadvantage is that I have to recreate them on each of my view.
thanks
Alex

Just to close this thread, I will summarize the different possible options:
Navigation buttons on each view: This is the easiest way to validate obligatory fields but for component reuse it's not good idea to have navigation buttons on individual views.
Navigation buttons on main views: If we placed the navigation buttons on our main view, the validation is kind of painful, before firing an outbound plug from the main view and a corresponding inbound plug on the individual view, we will have to manually verify our obligatory fields from the context of the componenent controller or using cross-component data sharing.
Navigation using GAF (Guided Activity Floorplan): I think this option is the way to go! The problem here is that's very difficult to find documentation on that subject, also, the tools from SP 15 is not as user friendly then the one that's coming in NW EhP1.
Alex

Similar Messages

Still having navigation problems and need help with how to debug

Hi,
I've been porting over a servlet project to JSF and I'm still having navigation problems. I thought the problem might have been because the original project used HTML frames and so the "from-view-id" JSP defined the frame/framesets and the specific JSP that does the submit (and so is named in the "from-view-id" is never defined in a "to-view-id" attribute). I've now switched to using an IFRAME, and that resolves that problem. So now the JSP is defined in a "to-view-id" attribute and it includes an named IFRAME that can be used as a target. I press the submit button and I get not the JSP expected butinstead the same JSP displayed inside its own IFRAME.
Here is the code for the submit. I've simplified it as much as possible with a static action (originally it was a call to a method) just to try and get things to work. This is the current version:
<h:commandButton value="View Alias" action="foo" styleClass="select" type="submit" />Here is the navigation rule in faces-config.xml. Again, the problem is that SelectManager get redisplayed in the IFRAME instead of display.jsp.
<navigation-rule>
   <from-view-id>/SelectManager.jsp</from-view-id>
   <navigation-case>
      <from-outcome>foo</from-outcome>
      <to-view-id>/display.jsp</to-view-id>
   </navigation-case>
</navigation-rule>I have also tried it without the "from-outcome-value" which I presume means that the "to-view-id" gets displayed unconditionally and it still fails. Any ideas on how I can debug this? (I'm using GlassFish if that's important to know)
Rob Tanner
Linfield College

Raymond, The real trick is avoid doing technical things when coming down with the flu (I should also add that I'm a JSF newbie). Reading your original message this time I see what you're suggesting and found a conversion error although I don't understand it. Here's the code (including the <h:message/>):
            <h:selectOneMenu value="#{members.dcodes}"
              style="color: #7f0000" id="selector">
              <f:selectItems value="#{members.departmentList}" />
            </h:selectOneMenu>
            <h:message for="selector" style="color:white"/>And here's a snippet of the generated HTML:
<select id="j_id_id26:selector" name="j_id_id26:selector" size="1" style="color: #7f0000">
         <option value="aad" selected="selected">Academic Advising</option>
     <option value="aaf">Academic Affairs</option>
     <option value="adm">Admission</option>
     <option value="up">Upward Bound</option>
</select>If I select "Admission" for example, the error I get is:
Conversion Error setting value 'adm' for 'null Converter'.Since everything is a String value, I don't get the error. Could someone please enlighten me.
Thanks.

Navigation Problem in OBIEE

Hi,
I have a strange navigation problem. I have the navigation setup from the 1st page of my dashboard to go to the second. When I first bring up the first page, and then click , nothing happens. Now if I refresh this page and then click again, I am able to navigate to the second page. I would to hear if anyone has seen similar issue. Any help is appreciated.
Thanks,
Bharat

Still haven't found a solution to this problem.
Even if I remove the form1.setTarget( null or other framename/windowname)
I tried changing to using the onclick="from1.target='mywin';" and also onclick="form1.target='_self'; on the button. Does not work/ have the desired effect of controlling where the page is opened: in same window or in another frame or window.
For some reason navigation also totally breaks, after a search, with a similar sql as in this message, and I get no error when I debug and step through the code.
After doing one search, navigation seems to stop working and only the search.jsp page is the target.
If I do a view first navigation works to new page/servlet output but still not in a new window/frame.
This simple stuff in a normal simle html page, should not be so hard to accive with SJSC perhaps someone of you in the community or the developers at sun can give us insight into this simple problem.
It must be fairly common that one likes to control where a page is opened, in the existing window/page/frame or in a new window/frame.
Anybody else had any problems with navigation not working with similar code ??
If I remove the do_search() call it works, the navigation continues to function, but still have no control of the destination window/frame.
Kind Regards
Roger

Mouse navigations problem with Sun Java 1.5.0_*

Hello gurus,
We need to move from JInitiator to Sun Java Plugin; according to the Forms10g Client Platform Support (http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html) one of the certified version for Forms 10.1.2.0.2 of the the Sun Java Plugin is 1.5.0_06 and Internet Explorer 6.0, we have tested also SJPI 1.5.0_09 and we get the same mouse navigation problem reported in the following Oracle Forum threads.
Mouse navigation don't work with Java Plugin.
Mouse navigation don't work with Java Plugin.
Forms 10gR2, Sun Java 1.5.0_06 gives mouse problems
Forms 10gR2, Sun Java 1.5.0_06 gives mouse problems
Does anybody know a solution to this problem?
Any help will be really appreciated.
Regards,
Victor.

You need to use 1.5.0_12 or newer. The client SOD is not up-to-date on this specific point. A lot of navigation problems was fixed in this very release.
The Management team should change this in the client SOD, wonder why they still refer to 1.5.0_06. For Applications, the first 1.5.0 to be certified was _12.
Also make sure, that you are using the latest Patch 3 for 10.1.2 (10.1.2.3). This patch also contains fixes for a lot of these wellknown issues.
Hope this helps,
Jacob

Navigation Problem in Next/Previous Record

Hi,
I have a Master (have 20 fields) and Four its Detail block visible on same screen but each block have its own Canvas and Window. Now master table have 1700 records with its detail tables. So after Query when I press the Next_Record button it will no response some time I have to press it twice or thrice then it will respond and some time on fist click it gives the response.
So I want to navigate through Next Records or Previous Record buttons on single click.??????????
Kindly send me the solution of this problem on urgently basis.
Best Regard,

Hi,
It's very difficult to suggest something by readingyour post. There are many reasones for navigation problem. Validation is one of them. Be sure that validation triggers written on any level are working properly. What code you have written on the buttons that you are using for navigation. In which blocks you have put your buttons. It is recommended that you put all your non-database items in a non-database block. Check this also.......

Installing ios8.2 does not resolve Google map navigation problem or gps tracking!

Installing ios 8.2 does not resolve Google map navigation problem.

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

In a document library : group by view and manage metadata filter & Navigation problem

Hi all, I encounter a problem when configuring a document library using a group by view and in combination with the Managed Metadata filtering and
navigation :
- all the documents appear under my group by, even the ones that does not correspond
- In the other hand, the number in brackets shows the correct number of documents that should be shown
See screenshot below.
Did you already encounter that issue ? Is there a workaround ?

Hi,
According to your post, my understanding is that you wanted to use a group by view and combine with the Managed Metadata filtering and navigation in a document library
to show the corresponding documents with the correct numbers in SharePoint 2013.
In my SharePoint 2013, I created a view which was group by two columns and combine with the Metadata Navigation Hierarchies and Key Filters some fields in a document
library. As a result, it showed only items matching the filter values.
So, I recommend that you can follow the steps to implement it in your environment.
Step1: Enable Metadata Navigation and Filtering:
Metadata Navigation and Filtering is a Site Feature that has to be activated for this to work.
And, the Metadata Navigation and Filtering feature is enabled by default on most sites.
If it is not enabled for your site, you can enable it on the Site Features pages for your site.
You must be a Site Owner or a Site Collection Administrator to enable Metadata Navigation and Filtering.
1. Go to “Site Settings” and click “Manage site features” under Site Actions.
2. Find “Metadata Navigation and Filtering” in the Features list and click “Activate”.
Step2:
Configure Metadata Navigation:
You must have a least the Manage Lists permission level to configure metadata navigation for a list or library.
1. Open the document library for which you want to configure metadata navigation.
2. Go to “Library Settings” of the document library and click “Metadata navigation settings” under “General Settings”.
3. In the Configure Navigation Hierarchies section, select the field or fields you want to display in the navigation hierarchy and then click “Add”.
4. By default, Folders are automatically displayed in the navigation hierarchy. If you do not want folders to display, select Folders, and then click Remove.
5. In the Configure Key Filters section, select the fields you want to add as Key Filters, and then click “Add”.
6. In the Configure automatic column indexing for this list, specify whether you want to automatically create indices on this list to increase the performance of the
queries that users will perform when they use the Navigation Hierarchy and Key Filter columns you've specified. It is recommended that you select the option “Automatically manage column indices on this list”.
7. Click “OK”.
Step3: Set a group by two columns by modifying view in the document library:
1. Go to the “LIBRARY” ribbon of the document library and click the “Modify view”.
2. Click the “Group By” and select up to two columns to determine what type of group and subgroup the items in the view will be displayed in.
3. Click “OK”.
Step4:
Go back to the document library, apply Navigation Hierarchies and Key Filters to do a test in your environment.
The result will like as below:
There is an article about how to apply Metadata Navigation Filtering in SharePoint 2013 for your reference.
http://blogs.interfacett.com/how-to-apply-metadata-navigation-filtering-in-sharepoint-2013
Best Regards,
Linda Li
TechNet Community Support

Command link navigation problems in IE but not firefox

Hi,
I've developed an application using JSF and SDO. I have several pages where the user is displayed data from the database and pages where the user can add data , edit data and delete data.
Each page has a jsp fragment contained in the page. This is based on faces and is the naviation menu. Each link in the menu is a command link and has navigation rules which are global. Now the problem I get is that when I sometimes nvaigate between pages using the navigation or command links in a page the page just refreshes and displays the same page again. But if I keep trying to click the link again then after a few attempts the link goes to the page i've requested. I've added system outs on the actions for the links to see if they are getting called when the page just refreshes. The answer is no as the system out line is never printed unless the action of the link is actually executed.
Now the problem is that this only occurs in ie and NOT in firefox. I'm really confused now!!
Here is some techinical details to help narrow down my situation:
I'm using wsad 5.1.2 which has faces 1.0, ie 6, firefox 1.0.3.
Any help would be appreciated!!

doh! i've solved this problem now....well for now its working perfectly but i'll have to do a bit more testing.
For anyone that has this problem here was my solution...
- In IE i went to tools > general tab > settings
from this menu choose check for newer versions of stored pages to automatically. I previously had every visit to the page.
This seems to have fixed my problem and the reason why it worked in firefox was because the settings for caching were different.

Navigation Problem in forms 10.1.2.0.2 !!!

Hi All,
when we create relation between master and child block then getting problem in navigation.
i assume that you have form with two block with relation and data then execute query then
start following step
0) make sure you set required = true for first navigation item of child block
1) you are in child block make some change on any item and make your cursor must not be on first navigation item.
3) commit the form
2) then click on master block and here make sure you are clicking on non current record.
From
Chirag Patel
From
Chirag Patel

Thanks Frank,
Yes Frank please follow the steps.
this is error explanation :
I have debug many times !!!
actually it is not error but funny behaviour !!
when you click on parent block on diffrent record then validataion trigger of first item of child block will fire. I do not why it is happening !!!
I removed the validation trigger and did required=true for first navaigation item of child block then also it's behaving funny.
This are the steps.
1) create form with parent and child block and make relation ship
2) insure that you put 2 record in parent and 2-2 recors in child for each parent record.
3) insure that your first navigation item of child block has required property = true
4) run your form fresh
5) from parent bloc execute query ( I hope child block is populate some records)
6) click on any record of child block and make changes
7) then commit your form.
now fun will start
8) click on parent block on any record which has child records and non current record.
9) then form should populate details for child instead of it behaves different as follows
you will find FRM-40202 : Field must be entered
your cussor will remian in child block;
your record will not change in parent block.
and child block will remail blank.
by debugging I found that problem is coming from this code of <Clear_All_Master_Details> procedure
-- Put cursor back where it started
IF :System.Cursor_Item <> startitm THEN
Go_Item(startitm);
Check_Package_Failure;
END IF;
when I remove this line
Go_Item(startitm);
then my problem is solved
But I do not know what is the other impact can be possible by removing this.
Hello Frank
I hope you will catch this error by this example.
From
Chirag Patel

Navigation problem in jsf

i have created a simple login page in which two label and two text box for inter usename and password but after clicking submit button it does not navigate to the specified page as i have given in the facesconfig.xml file.here is my code.this page is welcomeJSF.jsp
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
   "http://www.w3.org/TR/html4/loose.dtd">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <title>JSP Page</title>
    </head>
    <body>
        <f:view>
            <h:form id="loginForm">
            <table align="left" border="1" cellspacing="1" cellpadding="1">
                    <tr>
                        <td>
                            <h:outputText id="label1" rendered="true" value="Login Name"/>
                            <h:inputText id="text1" rendered="true" value=""/>
                        </td>
                    </tr>
                    <tr>
                        <td>
                            <h:outputText id="label2" rendered="true" value="Password"/>
                            <h:inputText id="text2" rendered="true" value=""/>
                        </td>
                    </tr>
                    <tr>
                        <td>
                            <h:commandButton id="button1" action="#{test.checkLogin}" value="Submit"/>
                            <h:commandButton id="button2" type="reset" value="Reset"/>
                        </td>
                    </tr>
            </table>
            </h:form>
        </f:view>
    </body>
</html>
and here is my facesconfig.xml file
<?xml version='1.0' encoding='UTF-8'?>

<faces-config version="1.2"
    xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd">
    <managed-bean>
        <managed-bean-name>test</managed-bean-name>
        <managed-bean-class>com.test.Test</managed-bean-class>
        <managed-bean-scope>session</managed-bean-scope>
    </managed-bean>
     <navigation-rule>
    <navigation-case>
      <from-outcome>login</from-outcome>
      <to-view-id>/Login.jsp</to-view-id>
    </navigation-case>
</navigation-rule>
</faces-config>
[\code]

Try this:
page_1.jsp
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Page 1</title>
</head>
<body>
<f:view>
<h:form id="loginForm">
<h1>Page 1</h1>
<table align="left" border="1" cellspacing="1" cellpadding="1">
<tr>
<td>
<h:outputText id="label1" value="Login Name"/>
<h:inputText id="text1" value="#{test.name}"/>
</td>
</tr>
<tr>
<td>
<h:outputText id="label2" value="Password"/>
<h:inputText id="text2" value="#{test.password}"/>
</td>
</tr>
<tr>
<td>
<h:commandButton id="button1" action="#{test.checkLogin}" value="Submit"/>
<h:commandButton id="button2" type="reset" value="Reset"/>
</td>
</tr>
</table>
</h:form>
</f:view>
</body>
</html>
page_2.jsp
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Page 1</title>
</head>
<body>
<f:view>
<h:form>
<h1>Page 2</h1>
<h:outputText id="label1" value="#{test.name}"/>
<h:outputText id="label2" value="#{test.password}"/>
</h:form>
</f:view>
</body>
</html>
com.test.Test.java
package com.test;
public class Test {
private String name;
private String password;
/** Creates a new instance of Test */
public Test() {
public String getName() {
return name;
public void setName(String name) {
this.name = name;
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
public String checkLogin(){
return "page_2";
faces-config.xml
<managed-bean>
<managed-bean-name>test</managed-bean-name>
<managed-bean-class>com.test.Test</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
<navigation-rule>
<navigation-case>
<from-outcome>page_2</from-outcome>
<to-view-id>/page_2.jsp</to-view-id>
</navigation-case>
</navigation-rule>
You need to be careful when refering to a jsp files, remember that is case sensitive, that could be your problem.

Navigation Problem in JSF - Urgent, pls help

hi,
I have a problem while navigating into a popup using a custom commandLink which opens the popup.The problem is that when i close the popup and return to the parent JSF and click any button or link in the parent, the page navigates to the page that was shown in the popup. This is my custom component:
<hl:helplink id="alternateIdHelpLink" rendered="true" actionListener="#{helpBean.handleEvent}" value="Help" action="helpNeeded" target="NewWin" onclick="javascript:openPopup();"></hl:helplink>I have specified the navigation 'helpNeeded' inside the faces-config file which navigates to the page that is shown in the popup. So the problem is that i am unable to navigate to any other page after i open the popup(even after closing it).Can anyone pls find a solution for this problem.
thanks and regards
soorejkumar

Thanks Sergey.Smirnov for the code..but its not working :-(...
This is my javascript for opening the popup in my help.js file:
function openPopup() {
var windowDefn = "width=800, height=400, location=no, menubar=no, status=no, toolbar=no, scrollbars=no, resizable=yes";
win=window.open('',"NewWin", windowDefn);
}On clicking the Custom Command Link the popup is opened. But then when i return back to the parent and click any other link or button the contents inside the popup is being displayed.
<hl:helplink id="alternateIdHelpLink" rendered="true" value="Help" onclick="openPopup()" action="#{helpBean.execute}" target="NewWin" actionListener="#{helpBean.handleEvent}" ></hl:helplink>I tried to hard code the path of the jsf file into the popup but that gave an error that 'Page Cannot be Displayed'.
I tried to get the path of the JSF using the contectPath as follows:
var path= <%= renderResponse.encodeURL(renderRequest.getContextPath() + "/pages/epsHelp.jsp" %>;
window.open('"+path+"','helpPopup','height=200,width=400,status=no,toolbar=no,menubar=no,location=no,scrollbars=yes');",null);When i viewed the source of the parent page the javascript was showing the correct context path ie "/help/pages/myjsf.jsp". What might be the issue.Can you please help..
Thanks
soorejkumar

WD Java iView & Dynamic Navigation Problem

Hi,
I'm trying to use a WebDynpro Java iView in Dynamic Navigation but have the following display problem:
When I navigate to the page for which I've added the iView to the dynamic navigation, only the WebDynpro iView (from the navigation) is shown. You can see the page in its correct form being loaded but as soon as the navigation iView seems to be loaded/ing it replaces the full lower part of the screen (navigation and content panel).
If I use a plain URL iView in the dynamic navigation the behaviour is as expected.
But if I add a WebDynpro iView or even a page containing that iView I get the strange behaviour again.
I'm running NW04s SP7.
Any ideas?
Do I have to set some properties on the WebDynpro iView?
I've tried a couple of things but none did work so far.
Thanks & Regards
Markus

Hi Henrik,
Sorry for the late reply but I'm just back from vacation.
No, I have not found a solution. I decided to go for an integrated application instead (Main WD application that bundles navigation with other applications). That works but of course is not as "nice".
Have you come across some solution yet?
Kind Regards
Markus

Navigation problem on 6110 navigator

I have experience a search problem with my Nokia 6110 navigator, whenever i search Broome, Australia, or move the cursor on the map to Broome, my navigation application will automatically shut down, and will lose my previous successful map point. Can anyone tell me if they have experience the same problem with their phone? thanks

Hi timothy,
I have the exact same problem on my phone and note you posted the problem back in August. Have you figured out why as yet? Please let me know, otherwise I will have to start chasing it up with Nokia or Route 66.
Thanks

Accordion with Vertical Navigation problem

Following tutorial about phone layout accordion/vertical navigation menu encountering following problem in my original file:
Create accordion - ok (style to my pref)
Insert vertical navigation - ok (style to my pref)
When trying to resize the v/nav to hit the red line on browser edge - both left and right, in preview and in mobile simulator the navigation panels don't expand accordingly to the width of the mobile screen.
If try with only accordion with no menu all ok. As soon as I add the navigation and try to size to hit the red guides indicating that it will resize with browser size, when preview it doesn't as described above.
Any suggestions?
Thanks
Sam

If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
    float: left;
    width: 225px;
    margin: 60px 0px 60px 60px;
    color: #FFFF0D;
    background: #595FFF;
    border-radius: 13px;
    -moz-border-radius: 13px;
    -webkit-border-radius: 13px;
    padding: 5px 5px 0px 5px;
    border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;

Navigation problem in using ITS

I have one created one module pool program for goods movement.
its having 6 screens.
in order to get this program in the mobile divice i have configured ITS.
I have created Internet Service is se80 and in SICF.
Now i am getting the first screen in the internet explorer.
the problem which i am facing now is that when i click on any button its not navigating to any screen.
actually nothing is happening.
Is thr any thing i need to do while creating the template or any other configuration need to be done.
please respond if you know the reason

Dear Ivan,
Thanks for replying.
I have given these many parameters in GUI Configuration (SICF - Service data tab)
~THEME     =99
~TRANSACTION=     ZBSRWM
~ITSMOBILE=     1
~SOURCES=     ZBSRWM,itsmobile
~GENERATEDYNPRO=     1
But still its not working. The actual problem is that i am not able to go to next screen.
When i gave ~webgui its throwing an error (403 forbidden).
Is there any thing else i need to do.
Regards,
Pradeep Alex

RoadMap UI Navigation Problem

Similar Messages

Maybe you are looking for