Navigation Problem in Next/Previous Record

Hi,
I have a Master (have 20 fields) and Four its Detail block visible on same screen but each block have its own Canvas and Window. Now master table have 1700 records with its detail tables. So after Query when I press the Next_Record button it will no response some time I have to press it twice or thrice then it will respond and some time on fist click it gives the response.
So I want to navigate through Next Records or Previous Record buttons on single click.??????????
Kindly send me the solution of this problem on urgently basis.
Best Regard,

Hi,
It's very difficult to suggest something by readingyour post. There are many reasones for navigation problem. Validation is one of them. Be sure that validation triggers written on any level are working properly. What code you have written on the buttons that you are using for navigation. In which blocks you have put your buttons. It is recommended that you put all your non-database items in a non-database block. Check this also.......

Similar Messages

Next/previous records

Hi,
I am new to Forms 6i and any pointers would be appreciated.
I have set up a form using a master/child relationship. The
master block (mfg_date) has only one field (id). I created
toolbar buttons to step through the master records using the
following code.
(Toolbar Button code for previous record)
GO_BLOCK('mfg_date');
GO_RECORD(TO_NUMBER(:SYSTEM.CURSOR_RECORD)-1);
(Toolbar Button code for next record)
GO_BLOCK('mfg_date');
GO_RECORD(TO_NUMBER(:SYSTEM.CURSOR_RECORD)+1);
These buttons work fine by themselves.
I also created an LOV allowing the user to select any master
record using the following code.
(WHEN BUTTON PRESSED Trigger Code for LOV)
DECLARE
v_choose BOOLEAN;
BEGIN
v_choose := SHOW_LOV('new_mfg_date');
IF NOT v_choose THEN
MESSAGE('You have not selected a value.');
BELL;
RAISE FORM_TRIGGER_FAILURE;
ELSE
GO_BLOCK('load_sheet');
IF :SYSTEM.BLOCK_STATUS ='CHANGED'
THEN DO_KEY('COMMIT_FORM');
END IF;
GO_BLOCK('mfg_date');
GO_RECORD(TO_NUMBER(:SYSTEM.CURSOR_RECORD));
END IF;
END;
This code also works fine by itself.
My problem occurs if I use the LOV and then use the
previous/next record buttons. If I select a record using the LOV
and then use the buttons, the next/previous records displayed
are in relation to what was selected with the buttons, not with
the LOV. For instance: If I use the buttons to step through the
records up to record 5, and then select record 18 with the LOV
and then use the buttons again, the record navigation is in
relation to record 5, not 18.I start through the records with
the next-record button, the next record displayed is 6 instead
of 19. Record 18 also seems to become record 5 at this point.
What I would like is to have the next/previous buttons work in
relation to the record that is displayed. I have also tried
up/down, scroll_up/scroll_down, and next_record/previous record
with the same results. Obviously there is some logic that I’m
not grasping yet. Hopefully someone maybe able to point me in
the right direction.
Thanks
Paul Howard
[email protected]

Yeahh and don't forget that even google doesn't show you more than 1000 records ;)
Gints Plivna
http://www.gplivna.eu
Message was edited by:
gintsp

Is there an easy way to fetch next/previous record in Apex?

I am new to APEX/Oracle, but have a lot of expierence as a mainframe programmer and some experience with SQL.
I have been tasked by my boss to create a set of pages in an application as follows.
Page 1: Select an Employees Name and go to Page 2.
Page 2: Display Employee's Biography Information.
Add a "Next Employee" button and a "Previous Employee" button that will fetch the next/previous Employees Biography info respectively.
In essence, he wants a query with every employee's biography information with the employee selected on page 1 used as the starting pointer.
I have successfully built "select an Employee's name on page 1" and "display his/her info on page 2" with a query that returns a single record.
What I can not figure out is how to get a next and previous button to get the next or previous record in a multi record query, using the intially selcted employee as the intial pointer.
Is their an easy way to build this using built-in APEX functionailty, or will it require programming to achieve this requirement?

Bob,
I installed the Aria application, but now I wish I'd run the preview first. It's a cool application, but I don't see anything like what greich requested. I'm looking for the same thing.
<ol>
<li> and clicked the Edit or View Details button for an individual. </li>
<li>That takes me to a custom Form page that shows one person. </li>
</ol>
I'm trying to imagine how I'd code buttons for that Form page to let me click to see the next or previous person on that same form. My mind gets totally boggled when I consider that the user might have filtered the report to only show a few records. How do I have any idea what those IDs were and what order they were showing in, to know which is the next individual.
My only thought it to create a process on the report that could save primary key (e.g. employee ID) to a table or Apex collection? Then the form button runs a process that finds the current ID then uses next or previous?
I'm not sure how I could capture the PK in the report in order to save it.
Does this make sense? Anyone got a better idea?
Thanks,
Stew

Next - Previous record in ADDT?

I have an image gallery that displays a dynamic image from a dynamically created thumbnail, which works fine.
Is there a way to have 2 arrows at either end of the thumbs and move to the next image in the recordset, ie a Previous and Next link? ...just like there is in the pop-up window if you use the dynamic Thumbnail tool - but I don't want it in the pop-up window, but rather in the main window.
Thanks in advance,
Mick

Hi Mick,
Perhaps you've already found an answer to this question. But I've learned thanks to a tip from Günter Schenk here on these forums, (and with some experimentation on my part), that one can add paging navigation using Dreamweaver's native tools to do as you describe.
Data tab > Recordset Paging : Recordset Navigation Bar (and sub options)
Data tab > Display Record Count : Recordset Navigation Status (and sub options)
I've been using the native Recordset Navigation Bar to compliment ADDT without trouble.
Regards,
JTueller

Question about going to next or previous record

Hi there,
I have a data block which is not based on table. It is a multi record block that gets populated with default values depending on some value on the previous tab. This item called "description" has also a LOV attached to it. The user should have the option of keeping the default values or clicking on LOV to change the value for each record. Each LOV is different and depends on default value.
Cursor is in last record. I click on LOV the correct lov pops up. click on previous record by just clicking on the record and not using (previous record button from toolbar) and click on LOV, incorrect LOV is shown. It is showing the LOV from the last record.
But if I click on previous record button, correct LOV gets populated.
Which trigger should I use to solve this?
Thanks

Hi,
I would use the when-new-record-instance trigger to kick off your logic.
Where is it called from at present - post-query?
The previous & next record keys do the same as key-up & key-down but using the mouse forms will not fire this logic for any records passed over. We had a similar problem with validation and had to disable mouse navigation for that form so we could just trap key movement.
Regards
Kevin

Page numbers navigation bar instead of the standard first-next-previous-last

I want to add page numbers to my navigationbar instead of the standard "first next previous last".
For example I have a repeat region with a navigation bar (standard) I have 7 records per page and I would like it to say at the bottom:
1 2 3 4 5 ect. Is there any way I can code this up with php or with dreamweaver or is there an other way to do this.
Any help welcome

You can do it in DW
Add the below code
<div class="pages">
<ul>
<li class="prev"><a href="#">« Previous</a></li>
<li><a href="#">1</a></li>
<li><a href="#">2</a></li>
<li class="ellipsis"><strong>…</strong></li>
<li><a href="#">6</a></li>
<li class="current"><strong>7</strong></li>
<li><a href="#">8</a></li>
<li class="ellipsis"><strong>…</strong></li>
<li><a href="#">14</a></li>
<li><a href="#">15</a></li>
<li class="next"><a href="#">Next »</a></li>
</ul>
</div>
style it as
.pages{display:block; width:100%; text-align:center; clear:both; font-family:Verdana, Geneva, sans-serif;}
.pages ul{margin:0; padding:0; list-style:none;}
.pages li{display:inline;}
.pages strong{font-weight:normal;}
.pages .next{margin:0;}
.pages a,.pages .current strong, .pages .ellipsis strong{display:inline-block; padding:2px 6px; margin:0 2px 0 0;}
.pages a{border:1px solid #DFDFDF;}

Next,previous,last, and first record

dear all masters
plz help me my code dont work
i used button when button pressed and code below
First_Record;
execute_query;
last_record;
execute_query;
previous_record;
execute_query;
next_record;
execute_query;
but all wont work it wont goto the next, previous,last and first records.. master plz help me..
micababe

How do I navigate to the last_record after a query has fetched all my records. I jnow it existed the POST-FETCH trigger, but now how can I make this possible?
My problem is simple. I am trying to navigate to the last record of a block after the query has fetched all the records.
Thanks,
Lucian

Next/previous slide in navigator view

I don't know if I'm just totally stupid, but I'm getting nowhere.
If I'm in Navigator view, and has mouse focus on the slide in the center window (not the lefthand sidebar with all slides listed), and I want to move to the next slide, I naturally click 'page down' - but it is not bound to 'next slide'! Has this always been the case, am I just in Powerpoint mode? No default shortcut to go to next/previous slide, really?
(I know I can create my own binding through the menu commands Go to > Next Slide etc.)
Edit: I did search for similar posts, but the suggested thread did not come up until after I posted - here is the same question anyway: https://discussions.apple.com/message/23795464

See benvu's comment above. I found this thread looking for a solution to the exact same problem. Say you want to animate an object such that it appears from off-slide and ends up in a pre-defined place. You do it by using an 'action build' on the object, of type 'move'. But because the slide itself is always jammed into the upper left-hand corner of the canvas, it's extremely awkward placing the initial position off-slide to the left or top. You can do it by first placing it and animating it fully on the canvas, then move it off the canvas - but you can never grab it back afterward to reposition it.
For those of us who love Keynote because it allows us to create cinematic presentations that are more artful communication than bog-standard bullet points spinning in from space (+à la+ PowerPoint), this sort of technique is invaluable and oft-needed.
I, too, have posted a 'feature' request (or rather, a 'bug report').

Program has been bought City Guide Ukraine navigator. Wanted her to be reinstalled, but there is an inscription "there is a billing problem with a previous purchase". I already paid for this program.

Program has been bought City Guide Ukraine navigator. Wanted her to be reinstalled, but there is an inscription "there is a billing problem with a previous purchase". I already paid for this program.

Click "Account" under Quick Links at the top right of the iTunes store. Next to payment information click "Edit" and then select "None" under payment method.
On an iOS device go to Settings>Store>Apple ID>View Apple ID>Payment Information>None.
If "None" is not an option, you may want to contact iTunes support and request assistance:
http://www.apple.com/support/itunes/contact/

It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

how do i fix this. It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

Have a look at this thread.
Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."

Mixing next n records with cfswitch order by problem

Hello;
I'm trying to make 2 types of page navigation work together. both work fine independently, but when I put my next n record code together with my change order by code, when you hit the next button, it goes back to the set default for the order by. I know I need to change some code logic in my scripts that run the next n records, but I'm not sure what I need to change in it to make it all work together properly. I am attaching the code, in it's rawest form, but all code is here for both features.
<cfparam name="sort" default="1">
<cfquery name="getMerch" datasource="#APPLICATION.dataSource#">
SELECT merchID, MerchName, MerchDescription, MerchPrice, MYFile, CategoryID
FROM Merchandise
WHERE CategoryID = 2
ORDER BY
<cfswitch expression="#sort#">
<cfcase value="1">MerchName</cfcase>
<cfcase value="2">MerchPrice</cfcase>
</cfswitch>
</cfquery>
<cfset rowsPerPage = 3>
<cfparam name="URL.startRow" default="1" type="numeric">
<cfset totalRows = getMerch.recordCount>
<cfset endRow = min(URL.startRow + rowsPerPage - 1, totalRows)>
<cfset startRowNext = endRow + 1>
<cfset startRowBack = URL.startRow - rowsPerPage>
<cfoutput>

<cfif sort is 1>
<a href="#CGI.script_name#?sort=#IIF(sort is 1, '2', '1')#" class="pre2Nav">Order By Price</a>
<cfelse>
<a href="#CGI.script_name#?sort=#IIF(sort is 2, '1', '2')#" class="pre2Nav">Order By Product</a>
</cfif>

<cfif startRowBack GT 0>
<a href="#CGI.script_name#?startRow=#startRowBack#" class="pre2Nav">< Back</a>
</cfif>
<cfif startRowNext lte totalRows>
<a href="#CGI.script_name#?startRow=#startRowNext#" class="pre2Nav">More ></a>
</cfif>
</cfoutput>
<cfloop query="getMerch" startRow="#URL.startRow#" endRow="#endRow#">
<cfoutput>
All my output goes here
</cfoutput></cfloop>
Can anyone help me get this to work together? is it possible? and more importantly, how hard is it going to be to do this?
Thank you.

if I use this:
<cfdump var = "#isDefined('sort')#">
I get YES as the output, even when I hit the next button and change the category.
If I use this:
<cfdump var = "isDefined('sort')>
all I get is this:
isDefined('sort')

Navigate previous record,next record by entering key-up and key-down

Hi ,
JDeveloper11g_
I am trying to solve of how to navigate previous record,next record by entering key-up and key-down in ADF Table.
If any of you have this solution by JScript of Backing Bean please help me.
Thanks
zakir
===

Hi zakir,
I hope I understood your requirements correctly. You have an editable ADF table. You would like to use the up/down arrow keys to move from one row to the next/prev row of the same column. Since the Tab key moves the cursor to the right and Shift+Tab moves it to the left, now you want to implement the same thing but just up and down, correct? If so, try this.
/** Javascript **/
function detectKey(evt) {
    var inputText = evt.getSource();
    var id = inputText.getClientId();
    var start2 = id.indexOf(":") + 1;
    var end2 = id.lastIndexOf(":");
    var numValue = parseInt(id.substring(start2, end2));
    var evt2 = evt.getNativeEvent();
    arrows=((evt2.which)||(evt2.keyCode));
    switch(arrows) {
        // Up arrow
        case 38:
        numValue = numValue - 1;
        break;
        // Down arrow
        case 40:
        numValue = numValue + 1;
        break;
    var newStr = id.replace(/:\d:/, ':' + numValue + ':');
    var comp = AdfPage.PAGE.findComponent(newStr);
    if (comp != undefined) {
        comp.focus();
/** Jspx. (Place a client listener on each inputText in the ADF table) **/
<af:column .....>
<af:inputText value="#{row.bindings.price.inputValue}" .....>
    <af:clientListener type="keyDown" method="detectKey"/>
</af:inputText>
</af:column>With this, you get to move Up/Right/Down/Left in the editable ADF table without using the mouse.
References:
http://thepeninsulasedge.com/blog/?cat=29
af:clientListener attributes and methodes of event object in java script
Regards,
Chan Kelwin

NEXT PREVIOUS LAST FIRST PROBLEM

hi to all,
i get this error when i press next,previous,last first button... "Error.. you need to insert first item" and another is when it work the last and first its empty in all the text item.....
my code is..
Next_REcord for next button
previous_record for previous
last_record for last
first_record for first...

If you want to navigate through the records of you 're data block you need records.
So first 'execute_query'. You can put this in when-new-form-instance trigger.
If there are no records in your table, it's normal that you get this error when trying to navigate.
Regards

I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "LR encountered error when reading its previous cash and needs to quit. LR will fix this problem the next time it loads.' I have loade

I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "Light room encountered error when reading its previous cash and needs to quit. light room will fix this problem the next time it loads.'
I have loaded light room several times and even exited computer for 8 hours. Still get error message

A search of this forum shows lots of threads where this issue of "error reading cache" is solved

Creating next/previous buttons problem

I am creating next & previous buttons on my main scene. I have created a scrolling photo gallery as well as a random button to randomly select images. I have a photos layer that has 15 images tagged in the AS "img1" "img2"....hopefully this all makes sense so far.
What script can I use to easily create a next_btn. This is what I currently have
next_btn.onRelease = function() {
    photos.gotoAndStop("img"+1);
    photos.fader.gotoAndPlay(2);
"img"+1 goes to the "img1" however I would like it to go to the next img instead of always go to img1. I've tried _currentframe+10 (images are 10 frames apart) and some others but cannot seem to get it to work.
I would like this to work along with the random button so that when a random image is clicked, the person can click the next button and get to the next image.
Current script in...
random_btn.onRelease = function(){
    var picNum:Number
    picNum = Math.ceil(Math.random()*15);
    photos.gotoAndStop("img"+picNum);
    photos.fader.gotoAndPlay(2);
next_btn.onRelease = function() {
    photos.gotoAndStop("img"+1);
    photos.fader.gotoAndPlay(2);
if you need any clarification let me know! thanks!

i'll try to explain this simplier.
scene 1 (layers)
inside layers
AS
next back btn
random btn
photos
displays images when clicked on from photo gallery
scrolling photo gallery
photo gallery + buttons for gallery
i'm looking to create a simple < > prev and next image buttons.
My current script from above (original post) hasn't worked out.
random_btn.onRelease = function(){
    var picNum:Number
    picNum = Math.ceil(Math.random()*15);
    photos.gotoAndStop("img"+picNum);
    photos.fader.gotoAndPlay(2);
next_btn.onRelease = function() {
    photos.gotoAndStop(picNum+1);
    photos.fader.gotoAndPlay(2);
I'll take out the random_btn if need be to create just a regular next button and previous button. (i'll worry about tracking the scrolling image gallery later...one issue at a time)
Thanks again.

Navigation Problem in Next/Previous Record

Similar Messages

Maybe you are looking for