RoboHelp 9 Closing while building AIR
Hello,
I've been pulling my hair out trying to fix this, and I'm getting dangerously close to switching to that other app that rhymes with Glare, so hopefully someone can save us.
When we try to build the AIR version of our project, RoboHelp starts the build process, then just closes. No error message, doesn't appear to be a crash...just exits.
It worked fine in this same project a few hours ago. Tried it again just now and no luck.
This happened to me earlier on a different project and I started the project over, which fixed it again for awhile...until I encountered it yet again.
I've put the entire project into a zip folder and uploaded it to ftp://ftp.kinematics.com/pub/SA/Install/SA%20Roadmap/Roadmap.zip. Can someone help?
Here's the output from the log right before it closes:
Using RoboHelp HTML (RH9) with Windows 7, 64-bit.
Thanks,
Todd
Jeff, thanks for the feedback. I figured out what was happening and do believe it is a bug.
Since printing from AIR looks awful, we were generating individual PDFs for each chapter in our project, then including hyperlinks to those PDFs in our AIR project (via the file: type hyperlink).
Steps would be:
1) Create the Individual chapter PDFs.
2) Create the AIR, which would link to the latest version of the PDFs.
This works fine initially (works like a charm in fact). However, if I would update a topic and re-build the PDF files, that's what would introduce the problem. After the PDF files were updated, building the AIR output caused RoboHelp to close. The PDF files themselves did not change file names or directory locations--just the content of the PDF was updated.
This is a bug that should be fixed, since this is the only viable solution I've found to circumventing the terrible printing from AIR.
Similar Messages
-
Accordion Widget to be closed WHILE loading
I know that to have the accordion be closed you set the default tab to -1. I'm doing that. The problem is that while the accordion is loading it is completely open until it is finished loading, then it closes. This behavior looks terrible and my boss doesn't like it. Is there a way to make it closed WHILE it's loading?
You are not using SpryData on your site, so please remove such code from your markup.
As I suggest in my first reply to topic. Move the SpryAccordion constructors, that you currently have at the bottom of your page. To directly under the closing div of your accordions. This will remove the flickr.
I tried doing it this way and there seems to be no change. I've left the source code on the site with these changes still intact for you to investigate if you like. I may still be doing something wrong...
I'll also copy it here:
<%@ master language="VB" %>
<html>
<head>
<script type="text/javascript" src="sessionvars.js"></script>
<script type="text/javascript"><!-- sessvars.myObj = {page:"",acc1:-1,acc2:-1}; //--></script>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Diamond Phillips</title>
<link rel="stylesheet" href="DPstylesheet.css" type="text/css" />
<script src="Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<script src="SpryAssets/SpryAccordion.js" type="text/javascript"></script>
<link href="SpryAssets/SpryAccordion.css" rel="stylesheet" type="text/css" />
</head>
<body>
<form id="Form1" runat="server">
<div>
<table cellspacing="0" cellpadding="0" align="center">
<tr height="70">
<td class="title" width="300" valign="bottom" align="left">
<img src="images/util/diamondphillips.jpg" /></td>
<td class="header" width="646" valign="bottom" align="left"></td>
</tr>
<tr height="650">
<td class="navigation" width="300" valign="top" align="right">
<table width="300" height="798" border="0" align="right">
<tr>
<td width="294" height="549" colspan="2" align="left" valign="top">
<div id="Accordion1" class="Accordion">
<div class="AccordionPanel">
<div class="style1"><a onclick="Accordion2.closePanel(); return false;">masterplanning</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="temp2.aspx">content</a></div>
</div>
</div>
<div class="AccordionPanel">
<div class="style1"><a onclick="Accordion2.closePanel(); return false;">commercial</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="Panama.aspx">Panama</a></div>
<div class="style1"><a href="VanCottBagley.aspx">VanCott Bagley</a></div>
</div>
</div><div class="AccordionPanel">
<div class="style1"><a onclick="Accordion2.closePanel(); return false;">institutional</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="sutton.aspx">University of Utah Sutton Building</a></div>
<div class="style1"><a href="HCI.aspx" >Huntsman Cancer Institute.</a></div>
</div>
</div>
<div class="AccordionPanel">
<div class="style1"><a onclick="Accordion2.closePanel(); return false;">residential</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="militaryWay.aspx" >Military Way</a></div>
<div class="style1"><a href="wolcott.aspx" >Wolcott</a></div>
<div class="style1"><a href="BVRanchBarn.aspx" >Blue Valley Ranch - Barn</a></div>
<div class="style1"><a href="BVRanchHouse.aspx" >Blue Valley Ranch - House</a></div>
<div class="style1"><a href="Cabin.aspx" >Cabin</a></div>
<div class="style1"><a href="Cambridge.aspx" >Cambridge</a></div>
<div class="style1"><a href="McClelland.aspx" >McClelland</a></div>
<div class="style1"><a href="Nantucket.aspx" >Nantucket</a></div>
</div>
</div>
<div class="AccordionPanel">
<div class="style1"><a onclick="Accordion2.closePanel(); return false;">interiors</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="temp2.aspx">commercial content</a></div>
<div class="style1"><a href="temp2.aspx">institutional content</a></div>
<div class="style1"><a href="temp2.aspx">residential content</a></div>
</div>
</div>
<div class="AccordionPanel">
<div class="style1"><a onclick="Accordion2.closePanel(); return false;">landscape</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="militaryWayLandscape.aspx" >Military Way</a></div>
<div class="style1"><a href="VistaView.aspx">Vista View</a></div>
<div class="style1"><a href="SuttonLnd.aspx">University of Utah Sutton Building</a></div>
</div>
</div>
<div class="AccordionPanel">
<div class="style1"><a onclick="Accordion2.closePanel(); return false;">furniture</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="temp2.aspx">content</a></div>
</div>
</div>
<div class="AccordionPanel">
<div class="style1"><a href="StudentCoverPage.aspx" onclick="Accordion2.closePanel();">student work</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="StudentA.aspx">Grad Student 1</a></div>
<div class="style1"><a href="StudentB.aspx">Grad Student 2</a></div>
<div class="style1"><a href="StudentC.aspx">Grad Student 3</a></div>
</div>
</div>
</div><script type="text/javascript">var Accordion1 = new Spry.Widget.Accordion("Accordion1", {useFixedPanelHeights: false, defaultPanel: -1});</script>
</td>
</tr>
<tr>
<td colspan="2" align="left" valign="top">
<img src="images/util/dp.jpg" />
<div id="Accordion2" class="Accordion" >
<div class="AccordionPanel">
<div class="style1"><a href="firm.aspx" onclick="Accordion1.closePanel(); return false;">firm</a></div>
<div class="AccordionPanelContent"></div>
</div>
<div class="AccordionPanel">
<div class="style1"><a onclick="Accordion1.closePanel();">references</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="temp2.aspx" >content</a></div>
</div>
</div>
<div class="AccordionPanel">
<div class="style1"><a href="Contact.aspx" onclick="Accordion1.closePanel();">contact</a></div>
<div class="AccordionPanelContent">
<div class="style1"><a href="ftp://projects.diamondphillips.com" target="_blank">file transfer</a></div>
</div>
</div>
</div>
<script type="text/javascript">var Accordion2 = new Spry.Widget.Accordion("Accordion2", {useFixedPanelHeights: false, defaultPanel: -1});</script>
</td>
</tr>
</table>
</td>
<td class="display" width="646" valign="top" align="left" >
<div class="contentPos">
<asp:contentplaceholder id="project" runat="server"></asp:contentplaceholder></div>
</td>
</tr>
<tr height="45">
<td class="footer" colspan="2" valign="bottom" align="center"></td>
</tr>
</table>
</div>
</form>
</body>
</html>
Thanks -
Can the cover on the macbook pro be closed while playing music?
can the cover on the macbook pro be closed while playing music?
Air is drawn in through the keyboard for cooling, so I would recommend leaving it open 1/2-1" so the air can move.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD 120G Vertex 3 SSD Boot HD -
RoboHelp Packager for Adobe AIR is GM
RoboHelp Packager for Adobe AIR is GM now and you can
download it now for FREE from Adobe site –
http://www.adobe.com/products/robohelp/robohelp-packager-for-air
Adobe AIR runtime enables applications to deliver both the
benefits of server connectivity and the compelling end user
experience of a desktop application. With a seamless offline-
online experience, end-users of Adobe AIR applications can continue
to work when they are temporarily offline. RoboHelp Packager for
Adobe AIR now enables you to publish in Adobe AIR format. Neither
of the popular help output options - CHM or WebHelp or WebHelp on a
Server provide the array of features as RoboHelp Packager for Adobe
AIR does today. That said, in my opinion, RoboHelp Packager for
Adobe AIR is a beginning, beginning of a new revolution in help
authoring. Here is a list of what you get today
· Auto Update - Adobe AIR applications that can update
themselves when online connection is available and that can work
perfectly when desktop is offline. For example, Adobe AIR help file
created with RoboHelp Packager for Adobe AIR will prompt the
end-users when an update is available. With a single click, the
help file will update itself.
· Get Web 2.0 features - Adobe AIR applications can
store information locally – for example, when you add
comments to Online Help, they are stored locally and can be viewed
after you have closed the application. End users can also comment
on external pages and store the comments as part of help file.
Comments are still available when Online Help has been updated
(provided file names don’t change) or when you are offline.
· Extensibility - Unlike HTML Help which depends on the
CHM viewer, the functionality of the Adobe AIR is extensible and
customizable. For example, organizations can add branding
information to Adobe AIR help file, including icons for help file,
branding imagery on the top of the help file and so on.
· Multiple tab – never before end user experience
- Adobe AIR help file also allows you to open multiple tabs within
the tri-pane enabling multiple help topics and threads to be
navigated at the same time.
· Integrated interface to everything your end users need
- You can also add resource links to your help files –
enabling a single access point for product pages, user forums,
knowledge base, online help and external web pages.
· Multiple templates to choose from - Organizations get
to chose from several of the templates and can select a particular
skin or theme for each of these templates. With RoboHelp Packager
for Adobe AIR, there are three templates come out of the box -
Multi-Tab Accordion, Unipane and Classic Help.
· End user preferences - RoboHelp Packager for Adobe AIR
enables the help users to customize their help by selecting their
preferences (something they can’t do for a CHM or for WebHelp
output – which is not hosted on a Server).
· Cross Platform - Adobe AIR is cross-platform and
cross-browser, supported on Windows, Mac and Linux (currently in
pre-release).
Needless to say, Adobe AIR has attracted a lot of interest
among the help community and some of the experts believe that
within two years, Adobe AIR will be the preferred help format for
40% of all help authors.
If you have not tried it, you can download it now from
http://www.adobe.com/products/robohelp/robohelp-packager-for-air
Thanks and regards
Vivek Jain
Group Product Manager, Adobe Systems
Adobe Technical Communication Suite, FrameMaker and RoboHelp
www.adobe.com/products/technicalcommunicationsuite/
blog-
http://blogs.adobe.com/techcomm/When you are comparing this to Flash, does this comparison
extend to the requirement for each end user to install the Air
runtime on their PCs before they can access our RoboHelp system?
And that they will also get reminders to update to the latest
version of Air runtime? -
RoboHelp Packager for Adobe AIR - Beta 2 Announced
RoboHelp Packager for Adobe AIR is now updated. You can
download the new version for FREE from Adobe labs -
http://labs.adobe.com/technologies/robohelp/.
It has added a long list of novel features - first time for a HATT.
Now, besides multiple tabs, favorites, commenting and multiple
skins like Multi-Tab Accordion and Uni-pane Help, you have another
set of new features.
Designed for End Customers - Adobe AIR based Help templates
have been designed keeping in view the end customer. They have some
high-end navigation features like Mini TOC, Breadcrumbs, etc. Apart
from these capabilities, the new Adobe AIR based Help also empowers
the end customers to customize the Help. An end customer can set
their own preferences and customize Help as desired.
Compelling Rich Branded Experience- RoboHelp Packager for
Adobe AIR provides a compelling rich user experience. It includes
templates that help authors package the same content into three
completely different styles – Multi-Tab Accordion, Uni-Pane
or the Classic Tri-Pane Help. Apart from this it also helps the
Authors brand the Help as per Corporate Branding Guidelines. It
provides support for the addition of a Company Logo and a Punch
line in the main Help window. Apart from this it also provides an
About Box in the Help that details the version, description,
copyrights, logos etc.
Auto Update -Adobe AIR based Help applications provide an
Auto Update feature using which updates can be pushed to all
installed connected versions of Help. Usually, the Help content
bundled with the application is never updated, while the web
content is updated with current feature enhancements and additional
resources. Adobe AIR based Help provides you with the option to
publish updates for your end users at a common server location. The
Adobe AIR based Help is intelligent enough to check for updates and
prompts users to apply updates when it detects a new version is
available.
Review Workflows / Personalization of Help
Adobe AIR based help files can be configured in such a way
that you can add comments to topics and publish those comments at a
common location. This feature enables a complete review workflow,
whether or not the reviewer is a part of your group/organization.
* Reviewers within your network: Reviewers can publish their
comments to an XML file on a shared folder. They can also
synchronize the comments from other reviewers on the same network.
This enable multiple reviewers to simultaneously view the comments
being made by other reviewers as they review.
* Reviewers outside your network: You can send the .air file
to these reviewers who can then export their comments to an XML
file and send it to you. You can import these comments into your
Adobe AIR application.
Apart from the rewire workflow, the feature is designed to
help an end customer personalize Help by adding comments on the
same. These comments will not be uploaded to the server, however
can be exported to a file and shred with friends over email.
New Classic help Template - A new template called Classic
Help has been added. It is named Classic because it is a Tri-Pane
Help. Apart from that it has got all the power of any other Adobe
AIR based Help template. This template has a new feature called
“How do I” that lists all the browse sequences defined
in the WebHelp. We recommend that authors design their browse
sequences in such a way that they provide complete workflow
information to end customers.
Supports Packaging of Merged WebHelp- RoboHelp Packager for
Adobe AIR now supports merged WebHelp. If an author specifies the
WebHelp folder of a Master project, the Packager is intelligent
enough to detect and convert all referenced projects in the Master
Project. However, one needs to be careful while using this feature.
It doesn’t provide as much flexibility as Merged WebHelp. A
new Package needs to be created every time even when you update any
of the sub projects.
In Beta 2, zoom works flawlessly and search results has been
further improved.
If you have not tried the RoboHelp Packager for Adobe AIR,
you can download it now for FREE (Adobe RoboHelp 7 required).
Thanks and regards
Vivek Jain
Group Product Manager, Adobe Systems
Adobe Technical Communication Suite, FrameMaker and RoboHelp
www.adobe.com/products/technicalcommunicationsuite/
blog-
http://blogs.adobe.com/techcomm/
RoboHelp Packager for Adobe AIR-
http://labs.adobe.com/technologies/robohelp/When you are comparing this to Flash, does this comparison
extend to the requirement for each end user to install the Air
runtime on their PCs before they can access our RoboHelp system?
And that they will also get reminders to update to the latest
version of Air runtime? -
Error while building execution plan
Hi, I'm trying to create an execution plan with container EBS 11.5.10 and subject area Project Analytics.
I get this error while building:
PA-EBS11510
MESSAGE:::group TASK_GROUP_Load_PositionHierarchy for SIL_PositionDimensionHierarchy_PostChangeTmp is not found!!!
EXCEPTION CLASS::: java.lang.NullPointerException
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.getExecutionPlanTasks(ExecutionPlanDesigner.java:818)
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.design(ExecutionPlanDesigner.java:1267)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:169)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:119)
com.siebel.analytics.etl.client.view.table.EtlDefnTable.doOperation(EtlDefnTable.java:169)
com.siebel.etl.gui.view.dialogs.WaitDialog.doOperation(WaitDialog.java:53)
com.siebel.etl.gui.view.dialogs.WaitDialog$WorkerThread.run(WaitDialog.java:85)
Sorry for my english, I'm french.
Thank you for helping meHi,
Find the what are all the subjectarea's in execution plan having the task 'SIL_PositionDimensionHierarchy_PostChangeTmp ', add the 'TASK_GROUP_Load_PositionHierarchy ' task group to those those subjectares.
Assemble your subject area's and build the execution plan again.
Thanks -
Classpath error while building the web dynpro project
Hi
I have created an application in which on clicking the button on one view , next view opens and data is displayed in the tables. This data i am giving as static, and for that i have created a java file. this java file is located in the subfolder i have created in the package path i have given. While building the application, i get these two errors :
1) The project was not built due to classpath errors (incomplete or involved in cycle).
2) Missing required source folder 'BPOutageTable/BPOT'
BPOutageTable is the application name, and BPOT is the subfolder in which java file is present.
This application is similar to "The Master/Detail Viewer Application" example in the tutorials.
Can anybody please help in this?
Thanks & regards,
AnupreetHi,
You have give your classpath in your "lib" folder of the Dynpro application.
check your lib folder shows exact class path or not.
if you wish to add any jar files import it to your lib folder so you will not have compilation problem.
Hope it helps.If it is then close this thread.
Regards,
Guru -
Error while building sample application "Developing an Order Application"
hi ,
I tried to create a simple Mobile application using the instructions for "Tutorial: Developing an Order Application for Handhelds" given at :-
http://help.sap.com/saphelp_nwmobile71/helpdata/en/46/7294498d870ad3e10000000a11466f/frameset.htm
For the same , by using TCdoe SDOE_WB i created a new SWCV named ORDER_TAKER,
with a Data Object - > ORDER
added Data Object header node -> ORDERHEADER
The ORDERHEADER contains the following fields:
ORDERID CHAR8
CUSTID CHAR4
LONGTEXT CHAR32
SERVICEUNIT CHAR32
CREATED_ON DATS
CREATED_AT TIMS
As per the tutorial I created Mobile Service Component as "order_sv". under which created Data Objects , and a service name orderService . Now when I copied the code of Defining the Custom Methods , I am getting following error while building the MSC........
Line: -----
* [javac] Compiling 8 source files to C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\classes
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class OrderOrderheader
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:49: cannot find symbol
[javac] ERROR: symbol : method valueOf(java.lang.String)
[javac] ERROR: location: class java.util.Date
[javac] ERROR: order.setCreatedOn(Date.valueOf("2007-06-30"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:50: cannot find symbol
[javac] ERROR: symbol : variable Time
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order.setCreatedAt(Time.valueOf("08:45:00"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:77: cannot find symbol
[javac] ERROR: symbol : method valueOf(java.lang.String)
[javac] ERROR: location: class java.util.Date
[javac] ERROR: order.setCreatedOn(Date.valueOf("2007-07-05"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:78: cannot find symbol
[javac] ERROR: symbol : variable Time
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order.setCreatedAt(Time.valueOf("10:00:00"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:80: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OcaRoot.getInstance().commit();
[javac] ERROR: ^
[javac] 30 errors *
Line: -----
Please help...........
Ekam
Edited by: Ekam Preet Singh on Sep 29, 2011 10:32 AMHi,
Please have a look at this thread,
Re: Error in CompatibilityMode
Regards,
Saravanan K -
Error 7 occurred while building source distribution in labview 8
I can build exe file and installer for my project. But while trying to build source distribution i got an error. Error description is as follows:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File.vi -> SDBEP_Invoke_Build_Engine.vi -> SDBUIP_Build_Invoke.vi -> SDBUIP_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux.Hi Andy,
FYI, initially part of this project was developed in LabVIEW 7.1 and now I have
converted all the project files to LabVIEW 8.0. This was done by mass compiling and
saving all the VIs.
It is possible for me to build source distribution for some other programs. But I got the error while building source distribution for my current project. Same error was generated even while previewing the source distribution. This project contains some dynamic VIs. I had included them under the dynamic VIs and support files while creating EXE file. While building source distribution, i got an error message saying that :
"Unable to generate preview. An included VI or one of its dependencies does not exist. Open all Startup/Exported/Dynamically called VIs, recompile them (Ctrl-Shift Click the run arrow), and save them to update their dependencies.
\\Source code\Controls\Tests\Battery Current Calibration\Battery Current Calibration1.ctl
<Call Chain>Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File.vi -> SDBEP_Invoke_Build_Engine_Preview.vi -> SDBUIP_Build_Rule_Editor.vi -> SDBUIP_Item_OnDoProperties.vi -> SDBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux."
For this error I rename the control, relink it in the code, and save the VI. Now I got an error message indicating different control. I was totally confused by this behaviour. What is the problem? Why the problem occured? What procedure to follow to avoid these kind of errors in future? I would be thankful, if I can get answers for my questions.
Thanks in advance.
Ramasamy. -
Error while building xml document
Hi Everyone,
I have a problem while building xml document.
I have developed my java files using IBM Eclipse 3.0 and i had no problem while executing the files.
But while i am trying to execute the same code in jdk/bin, xml document is not working..
No error encountered while compiling but while executing when i try to print the xml string it just gives the root element name like [root : null]
Can anyone suggest some solution?To the values element add xmlns:xsi and xsi:noNamespaceSchemaLocation.
<values xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLocation="file:///c:/schema.xsd">schema.xsd is schema file. -
Getting an error while building a sample web service
Hi,
I am beginner in web services and started working on a sample application in a web service tutorial.
Build is failing in build.xml file while building sample web service using ant tool.
antBuildfile: build.xml
clean:
setup:
[mkdir] Created dir: /tmp/output/WEB-INF/classes
[mkdir] Created dir: /tmp/client_classes
compile.server:
[javac] Compiling 1 source file to /tmp/output/WEB-INF/classes
webservice.build:
webss.build:
BUILD FAILED
Z:/JAVA-COBOL/sample1/tutorial/sample1/build.xml:43: The following error occurred while executing this line:
Z:/JAVA-COBOL/sample1/tutorial/sample1/build-webss.xml:10: Problem: failed to create task or type source2wsdd*_
Cause: The name is undefined.
Action: Check the spelling.
Action: Check that any custom tasks/types have been declared.
Action: Check that any <presetdef>/<macrodef> declarations have taken place.
Can anyone look into this and let me know if you have any idea on this?
Thanks,
SRoop.
Edited by: SRoop on Jun 20, 2008 9:11 AM
Edited by: SRoop on Jun 20, 2008 9:14 AM
Edited by: SRoop on Jun 21, 2008 5:51 AMHi,
I am beginner in web services and started working on a sample application in a web service tutorial.
Build is failing in build.xml file while building sample web service using ant tool.
antBuildfile: build.xml
clean:
setup:
[mkdir] Created dir: /tmp/output/WEB-INF/classes
[mkdir] Created dir: /tmp/client_classes
compile.server:
[javac] Compiling 1 source file to /tmp/output/WEB-INF/classes
webservice.build:
webss.build:
BUILD FAILED
Z:/JAVA-COBOL/sample1/tutorial/sample1/build.xml:43: The following error occurred while executing this line:
Z:/JAVA-COBOL/sample1/tutorial/sample1/build-webss.xml:10: Problem: failed to create task or type source2wsdd*_
Cause: The name is undefined.
Action: Check the spelling.
Action: Check that any custom tasks/types have been declared.
Action: Check that any <presetdef>/<macrodef> declarations have taken place.
Can anyone look into this and let me know if you have any idea on this?
Thanks,
SRoop.
Edited by: SRoop on Jun 20, 2008 9:11 AM
Edited by: SRoop on Jun 20, 2008 9:14 AM
Edited by: SRoop on Jun 21, 2008 5:51 AM -
An error occurred while building the default domain
Hi Not sure if this is the right forum to post this but I hope someone here can help......
Hi,
I have just installed Oracle JDeveloper 11g R1 (Build 5407) (Oracle JDeveloper Studio Edition for Windows (934 MB) ) on my windows laptop. When the product opens it tries to start a intergrated weblogic domain:
[04:44:34 PM] Extending Integrated Weblogic domain...
[04:45:27 PM] ERROR: An error occurred while building the default domain.
Please see this log file for more details:
I don't even know where to start investigating the cause of this problem so any pointers or help would be appreciated!!
In case it is of any help the log file looks like this:
Log File: C:\Documents and Settings\richard anthony\Application Data\JDeveloper\system11.1.1.1.33.54.07\o.j2ee.adrs\ExtendDefaultDomain.log
Label: JDEVADF_11.1.1.1.0_GENERIC_090615.0017.5407
Product Home: C:\Oracle\Middleware\jdeveloper\jdev\
Domain: C:\Documents and Settings\richard anthony\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain
"C:\Oracle\Middleware\jdeveloper\common\bin\wlst.cmd" "C:\Documents and Settings\richard anthony\Application Data\JDeveloper\system11.1.1.1.33.54.07\o.j2ee.adrs\ExtendDefaultDomain.py"
Process started
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3.1.0\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files\Java\jre1.6.0_03\lib\ext\QTJava.zip;C:\DevSuiteHome_2\jlib\repository.jar;C:\DevSuiteHome_2\jlib\ldapjclnt10.jar;C:\DevSuiteHome_2\jlib\debugger.jar;C:\DevSuiteHome_2\jlib\ewt3.jar;C:\DevSuiteHome_2\jlib\share.jar;C:\DevSuiteHome_2\jlib\utj.jar;C:\DevSuiteHome_2\jlib\zrclient.jar;C:\DevSuiteHome_2\reports\jlib\rwrun.jar;C:\DevSuiteHome_2\forms\java\frmwebutil.jar;C:\DevSuiteHome_2\forms\java\FormsProperties1.jar;C:\DevSuiteHome_2\forms\java\handleimage3.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\SSLCON~1.JAR
wlst >
wlst > PATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_3\jdk\jre\bin\classic;C:\DevSuiteHome_3\jdk\jre\bin;C:\DevSuiteHome_3\jdk\jre\bin\client;C:\DevSuiteHome_3\jlib;C:\DevSuiteHome_3\bin;C:\DevSuiteHome_3\jre\1.4.2\bin\client;C:\DevSuiteHome_3\jre\1.4.2\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\DevSuiteHome\jdk\jre\bin\classic;C:\DevSuiteHome\jdk\jre\bin;C:\DevSuiteHome\jlib;C:\DevSuiteHome\bin;C:\DevSuiteHome\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Starbase\StarGate SDK\Lib;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_07\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3.1.0\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files\Java\jre1.6.0_03\lib\ext\QTJava.zip;C:\DevSuiteHome_2\jlib\repository.jar;C:\DevSuiteHome_2\jlib\ldapjclnt10.jar;C:\DevSuiteHome_2\jlib\debugger.jar;C:\DevSuiteHome_2\jlib\ewt3.jar;C:\DevSuiteHome_2\jlib\share.jar;C:\DevSuiteHome_2\jlib\utj.jar;C:\DevSuiteHome_2\jlib\zrclient.jar;C:\DevSuiteHome_2\reports\jlib\rwrun.jar;C:\DevSuiteHome_2\forms\java\frmwebutil.jar;C:\DevSuiteHome_2\forms\java\FormsProperties1.jar;C:\DevSuiteHome_2\forms\java\handleimage3.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar
wlst >
wlst > Initializing WebLogic Scripting Tool (WLST) ...
wlst >
wlst > Welcome to WebLogic Server Administration Scripting Shell
wlst >
wlst > Type help() for help on available commands
wlst >
wlst > Extend Default Domain
wlst > Reading domain: /C:/Documents and Settings/richard anthony/Application Data/JDeveloper/system11.1.1.1.33.54.07/DefaultDomain/
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/jdeveloper/adrs_template.jar
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/applications/jrf_template_11.1.1.jar
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/jdeveloper/adf.fine.logging_11.1.1.jar
wlst > Updating domain.
wlst > Error: updateDomain() failed. Do dumpStack() to see details.
wlst > Problem invoking WLST - Traceback (innermost last):
wlst > File "C:\Documents and Settings\richard anthony\Application Data\JDeveloper\system11.1.1.1.33.54.07\o.j2ee.adrs\ExtendDefaultDomain.py", line 43, in ?
wlst > File "C:\Documents and Settings\richard anthony\Local Settings\Temp\WLSTOfflineIni13125804671929424.py", line 89, in updateDomain
wlst > File "<iostream>", line 154, in ?
wlst >
wlst > File "<iostream>", line 103, in updateLoggers
wlst >
wlst > SystemExit: Failed to update logging.xml: java.lang.NoSuchMethodError: oracle.core.ojdl.util.XMLUtil.escapeAttrChars(Ljava/lang/String;Ljava/lang/Appendable;)V
wlst >
wlst >
wlst >
wlst > at com.bea.plateng.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
wlst >
wlst > at com.bea.plateng.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1490)
wlst >
wlst > at com.bea.plateng.domain.script.jython.WLScriptContext.updateDomain(WLScriptContext.java:425)
wlst >
wlst > at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
wlst >
wlst > at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
wlst >
wlst > at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
wlst >
wlst > at java.lang.reflect.Method.invoke(Method.java:597)
wlst >
wlst >
wlst > com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: Traceback (innermost last):
wlst >
wlst > File "<iostream>", line 154, in ?
wlst >
wlst > File "<iostream>", line 103, in updateLoggers
wlst >
wlst > SystemExit: Failed to update logging.xml: java.lang.NoSuchMethodError: oracle.core.ojdl.util.XMLUtil.escapeAttrChars(Ljava/lang/String;Ljava/lang/Appendable;)V
wlst >
wlst >
wlst >
Elapsed time: 52625 msHi,
Can you try the following steps and let us know if it works?
1. Create a folder in your c: drive (say c:\myjdevhome)
2. Invoke the command prompt, set JDEV_USER_HOME=c:\myjdevhome
3. cd to JDEV_HOME\jdeveloper\jdev\bin
4. Start the jdev (jdev.exe).
5. Run/Debug your application.
-Arun -
Error while building code in Weblogic Integration 9.2 MP3
Hi,
I upgarded my code from Weblogic 8.1 sp4 to 9.2 MP3 directly.
Weblogic 9.2 MP3 automatically converts all the .jpd, .jcx files to .java extensions.
While building the code in Workshop,I got the following error:
Interfaces such as com.x.y.z cannot be instantiated and unmarshalled from XML
(here "x.y.z.." are custom built interfaces)
I added the following jar: oc4j_extended_101340.zip, but that didn't solve the problem.
Please help!!Sorry, I cannot reveal x, y, z -- they are just custom built files.
Again, the error reported is:
Interfaces such as com.x.y.z. cannot be instantiated and unmarshalled from XML. -
Error while building the DC for CAF entity services
Hi all,
I am trying to create entity services in CAS and following the following help document from help.
http://help.sap.com/saphelp_nw04s/helpdata/en/05/3a0741b5b7ee6fe10000000a1550b0/frameset.htm
But While building I am getting following imports errors:
Error:
com.sap.caf.rt.bol.IPersistentBusinessObject cannot be resolved or is not a valid superinterface
com.sap.caf.rt.services.eventing cannot be resolved (or is not a valid type) for the field CarJDO
com.sap.caf.rt.bol.da.jdo.JDODADataAccessService cannot be resolved or is not a type
changedData cannot be resolved ,CarJDO.java
com.sap.caf.rt.bol.da.DataAccessFactory.DATASOURCE_LOCAL_DA cannot be resolved CarJDO.java
The method removeACL(String, String) is undefined for the type CAFPermission CarServiceBean.java
loadByCustomKeys(Car) is undefined for the type IDataAccessService CarServiceBean.java
Can anyone help.Hi all,
I am trying to create entity services in CAS and following the following help document from help.
http://help.sap.com/saphelp_nw04s/helpdata/en/05/3a0741b5b7ee6fe10000000a1550b0/frameset.htm
But While building I am getting following imports errors:
Error:
com.sap.caf.rt.bol.IPersistentBusinessObject cannot be resolved or is not a valid superinterface
com.sap.caf.rt.services.eventing cannot be resolved (or is not a valid type) for the field CarJDO
com.sap.caf.rt.bol.da.jdo.JDODADataAccessService cannot be resolved or is not a type
changedData cannot be resolved ,CarJDO.java
com.sap.caf.rt.bol.da.DataAccessFactory.DATASOURCE_LOCAL_DA cannot be resolved CarJDO.java
The method removeACL(String, String) is undefined for the type CAFPermission CarServiceBean.java
loadByCustomKeys(Car) is undefined for the type IDataAccessService CarServiceBean.java
Can anyone help. -
Error while building the eclipse using exadel tool
hi all
i m facing a problem while building project using eclipse tool called(exadel ).it gives error like "integarted external building tool error - : variable references non existent resource :${workspace_loc:/my project not found}".
so if anybody have idea about above pls let me knowThis problem come directly from your Exadel or Eclipse IDE itself.
It means that a directory (which is your project directory) is not available in your worspace dir.
usually workspace dir is inside your user home dir.
check to see whether this folder exisits or not.
Maybe you are looking for
-
I got the message that IOS 7 was ready to download. I wish I had read the reviews on it first. I had to move my photos and videos off the phone to free up memory space for the install. I was still able to see the phone with a file browser and grab
-
Why can't I log out of Itunes on my ipod
My ipod has two itunes accounts on it. One I know the password to and the other one I don't. After I tap log out of itunes on my ipod and go to update my apps it still says that im still logged into the account that I dont know the password to.
-
OBIEE 10g AGO Function Dynamically Change the Heading
I created columns in my rpd named Sales Previous Month, Sales 2 months ago and Sales 3 months ago using the AGO Function. This is working fine. My problem is when displaying these headings the users would like to see the Month Name instead of the Hea
-
Excuting stored procedure remotly from SQL Server
Hi everybody, H recive an error message when I try to execute a remote stored procedure on Oracle from SQL Server though a linked server of ME OLE provider for oracle. I can view all of the Oracle tables and views within SQL Enterprise Manager. When
-
We have Multiple users who claim they have been able to select multiple PDF's and select print. It then would send to a single stream and end up as one document. These are reader users. We have tested under reader 10.1.4 and 11.0.06 and haven't been