Roles not visible in the Catalog while requesting roles in OIM 11gr2

Hi Experts,
We have recently installed the OIM 11g r2 for a POC purpose and created few roles. The issue is we are unable to see the roles created while requesting the roles in catalog.
Already run the Catalog Synchronization Job and its scheduled to run in every 15 mins.
Thanks in advance for your help.

Also, which type of Role Category did you chose for the ones you created ? If you chose "OIM Roles" they won't appear in the catalog, any other Category (e.g. "Default") will be shown.
Try creating a new role with the "Default" category to test it; changing an OIM Role to another category won't work, it will still be hidden.

Similar Messages

  • Z Role not visible in the Field Grouping

    Hi all
       I have created(copied an Existing to a new) a Z Role in the System ! 
       And Saved it ! I could see it as an element in the BP View !
       Now I went to do the Field Grouping !  Under Basic Settings of BP, I selected the Filed Groupings --> Configure Field Attributes per BP Role !
       When I tried  adding my Z Role as a New Entry, I get the error : "Entry does not exist in TB003" !
        What I am missing out ?
        Any Help !
    Thanks
    FYI : CRM 5.0
    Thank

    Hi Jack,
    Please look in to SAP Note : 726197
    Reward if it helps
    Best Regards,
    Johnny.

  • Transported Roles not Visible for the User Log-in

    I have three roles in the development system.  These roles show up in the top level navigation for the users in the dev system.  All these roles and the underlying BSPs are transported to QA successfully.  I could assign them to users without any problems, but when the users log-in they can not see any of these roles at the top level navigation (In fact, they just get a blank screen).  "Entry Point" setting and "Sort Priority" is maintained for all the three roles.
    As a test, I created a new role with the same BSP links in QA itself and assigned it to the users.  This shows up in the top level navigation for the users.  I am wondering what's wrong with the transported roles!  If someone could help me here that would be great and I will assign points to helpful replies.  I have a very basic knowledge in portal.

    After applying SP12 in the portal landscape (EP 6.0), the role transports only work in our test environment, but not in production.  Even the manual corrections suggested in OSS note 1002832 didn't help.  I can preview all the iviews in the roles with my user id (admin id), but as soon as I log-in with the end user id nothing shows up [Not even the top level navigation tabs show up].  The following is the portal authorization methodology I chose.
    1. I assign users to the user groups
    2. I assign user groups to the roles
    I want to emphasize that all is well in our test environment, it is the production environment that shows inconsistency.  Let me know if anyone has any pointers.

  • Tax is not visible in the LOV while creating Tax Jurisdiction through Payab

    Hi Gurus,
    We are not using E-Biz Tax here, after upgrade, Users were unable to create a VAT Invoice with error as below:
    Could not update the payable information for the modifications done in the tax window ZX_TAX_RATE_INFO_NOT_FOUND N TAX_REGIME MU-Tax n TAX_CODE VAT N TAX_STATUS STANDARD N TAX_RATE_CODE 15% n TAX_JURISDICTION_CODE NULL
    I checked in the system, there are taxes, tax regime, Tax rate, Tax status but not the Tax Jurisdiction. I also tried to create a new Tax, Tax status and Tax rate but when I tried to create the tax jurisdiction, it shows me error as below:
    TAX no data found
    It does not show any tax in Tax Field, but when I go back and query my tax, it is available and enabled for transactions also. Am I missing any step in between? I have followed all the steps.
    Please help, what should I do to enable the tax already created in 11i and migrated to R12 and for new taxes also?
    This is a very urgent issue, a timely help will be highly appreciable.
    Thanks a lot, in advance.
    Regards,
    A.B.

    Hello,
    Please check the correct settings (input/Output Tax)
    IF every thing is correct, then update the table.
    If your problem still there, then it is simply a refreshment problem, so close SAP and re open again
    Hope your problem will be solved
    Thanks
    T.

  • Request not visible in the version management of a Report Program

    Hi,
    We Imported an external request into the SAP System.
    The request was imported successfully and a program already existing is updated with that request,
    The problem is that the request number is not visible in the Version Management of the Report Program, but the other Programs have the request number visible in the version management, we could not find the request number in that  particular program
    We tried reimporting the request but the request is not visible.
    Regards

    Check the transport logs and see if there are any erros/warnings.

  • TS1382 My I-Pod will not accept a charge.  The battery icon I normally see while charging is not visible on the screen.  The cord works fine to charge my I-Pad.

    My I-Pod will not accept a charge.  The battery icon I normally see while charging is not visible.  The cord works when charging my I-Pad.  Any ideas?

    Please find "System Information" in this folder path---Applications > Utilities---and launch it. When it opens, find "Power" in the left-hand contents pane and click it to get something like this in teh main pane:
    Copy everything in the "Battery Information" and copy/paste it here. The number values in that report may help us diagnose what is happening.
    Also, did you buy this battery directly from Apple or from another source. There are an increasing number of reports showing up that suggests some counterfeit batteries being sold.

  • Payload not visible in the XI monitor

    In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the ‘Payload’ is not visible in the last two steps of the monitor. We can see the Payload until ‘Technical Routing’ in the monitor. But ‘Call Adapter’ and ‘Response’ steps do not have payload.
    (TCode: SXMB_MONI)
    when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
    XML Message:
    Receiver Grouping
       -     SOAP Header
       -     SOAP Body
       -     Payloads
    Request Message Mapping
       -     SOAP Header
       -     SOAP Body
       -     Payloads
    Technical Routing
       -     SOAP Header
       -     SOAP Body
       -     Payloads
    Call Adapter
       -     SOAP Header
       -     SOAP Body
    <b>(( No Payload displayed, but present above!! ))</b>
    Response
       -     SOAP Header
       -     SOAP Body
    <b>(( No Payload displayed, but present above!! ))</b> 
    Any suggestions would be highly appreciated!
    Thanks in advance.
    Faiq

    Hi faiq
    This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
    This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
    <i>According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
    Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).</i>
    regards,
    Peter

  • Goods are not visible on the Web Shop main page (RUMP UP)

    Hi colleagues.
    Help please anybody :)
    There was the problem with the goods in Web Shop.
    Goods are not visible on the page Web Shop.
    Below you can see actions performed by us and Prerequisites:
    1. Repository was unachieved from Standard archive - WEC20_MDMCATALOG_CONS
    2. Taxonomy, Hierarchy and Lookup table data were transferred from CRM via MDMGX
    3. Manually created root node in Product Catalogs table in MDM
    4. Put technical code (ID) of created node to Product Catalog module in WCEM configuration - field Catalog ID.
    5. Fill another necessary fields in Product Catalog module in WCEM.
    6. Manually add test record in MDM and linked to node in Product Catalog table, elements from Main Taxonomy and other required fields.
    7. In preview mode of WCEM configuration not possible see any records from MDM (but product catalog elements showed correctly)
    More information about settings in MDM, CRM,WCB and configuration steps can see in attachment files
    Best regardn,
    Andrey

    Hi Denis
    Leading zeroes it's no my case, because the products (materials) replicated from CRM to MDM.
    Replication from CRM to MDM via MDMGX and Initial Load R3AC1 is successfull.
    But on the WebChannel web shop page this products are not visible.
    I have suggested that the problem in authirizations of technical user, which uses RFC Destinations from SAP NW AS Java (Web Channel) to MDM.
    According Security Guide for SAP Web Channel 2.0 (paragr. 8.3.2 see please screenshot), user of WEC_MDM_DEFAULT destination must assign the role WEBCHANNEL_CATALOG_DISPLAY_ROLE.
    But this role does not exist in the system (SAP MDM, SAP NW).
    Please give me advice about this.

  • Approved and published items are not shown in the catalog search

    Hello all,
    We are implementing SRM 4.0 SSP scenario .
    To support shopping of EBP we are also implementing CCM 2.0 as an add on.
    Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
    No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
    Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
    Do i have to approve the categories too and if yes can you  explain me how to do this?
    I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
    Thanks a lot for your help.
    Best regards,
    Bernd

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • Approve Button not visible in Tasks for Leave request in Tasks- MSS

    Dear gurus,
    Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
    Any suggestions....
    regards,
    Rajasekar.

    hello Bala,
    there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
    Thanks alot Bala..
    In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
    Regards,
    Raj

  • (Harmful) edit not visible in WkiHistory in "Feature Requests"

    Maybe this should be a discussion.
    I've just removed a porn link from the Forums table in "Feature Requests for..."
    The disturbing part is that the edit I removed first appeared in Rev.233, but was not visible in the WikiHistory.  I can construct a lot of scenarios here (but I won't!) and all of them are scary.  I cannot construct a scenario with a "harmless"
    rating.
    I'm only a newbie, it's not for me to take this further.  But I am sufficiently experienced to know that a revision of best practise access control should be undertaken.  Yesterday would be a good time to initiate it.
    Gordon.

    Hi Richard -
    Thanks for answering.  It's the comment to the edit that's missing.
    I believe (I have not tested) that blank comments are not listed as part of the edit, so all we get is the user's edit listing, but no clue of what was done in the edit.
    I draw your attention to Wikipedia, where all parts of the edit are summarized in the History List.  I don't believe the Technet Wiki History needs that amount of data, but OTOH that is the sort of thing computers excel at.  But I do believe Technet
    Wiki should record blank comments as well as filled comments.  Maybe a blank comment could be filled with the first 10 or 20 words of the edit?
    Gordon.
    Okay, please add the feature request to the Wiki section:
    http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools.aspx#TechNet_Wiki
    Hey, thanks for your edits here:
    http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools/compare.aspx?revB=0&revA=234
    You removed a dead link and a spam link!
    And the history tab showed me all that!
    We're actually thinking of migrating to the Wikimedia platform. Then that would give us your feature request. But it's best to capture it on our list so we don't lose sight of it.
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • TS1292 There are two numbers that are not visible in the middle of the code What can I do?

    There are two digits that are not visible in the middle of the itune code. How can I still access this card?

    Click here and request assistance, supplying as much of the code as you can.
    (74408)

  • At the time of call when i use speaker my sound is not visible to the prsn i call

    at the time of call when i use speaker my sound is not visible to the prsn i call

    Hello smarty007,
    Thanks for the question, and welcome to Apple Support Communities.
    From your description, it sounds like you are having issues with others hearing you while using speakerphone. For these symptoms, the following article provides the most relevant information. On the iPhone 4, it is commonly due to a third-party case blocking the top microphone:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Additionally, you can check out these articles:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    http://support.apple.com/kb/TS1631
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks,
    Matt M.

  • Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.

    Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1  - which is what introduced the bugs.
    The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
    Dave

    Hi
    I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
    http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html 
    He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
    le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
    I have asked him to post a bug report about Adobe Illustrator CC 2014.1
    Dave

  • I updated win7 and now I cant see ff. I have reinstalled it 5 times now. It shows it is running in task manager but it is not visible on the desk top.

    I installed win7 ultimate and then ff. ff worked fine until I installed win7 service pack 1 and all the other updates it recommended. I click to open ff and nothing happens. I look in task manager and it shows it is running. It is not visible on the screen or in the task bar. I have reinstalled a fresh download of it 5 times. I even tried the beta version but still the same problem. I can use explorer and chrome ok but not ff.

    The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
    For your SysFader issue, this "may" be the problem:
    1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
    2 Click on the "Advanced" tab. This will load a new page of options.
    3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
    4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

Maybe you are looking for