RoomExtension: Room manipulation (parameters) not persistent

Hi Folks,
im going crazy with RoomExtensions.
(ExtensionPoint: ON_CREATE_ROOM)
I get the actual Room via the IRoomInfoReader.
If I change for example the description - everything is fine. (I enter the room - and the description is changed)
BUT: If I add parameters (via IRoom.addParameter()) - I see the changes in the extension afterwards, but its not persistent. When I enter the room, the parameters are gone. How can this be?
Held would be VERY appriciated!
Thanks,
Simon

Hi Detlev,
thanks for your response!
You are completely right, the exact name is addRoomParameter().
The code from the process method of my extension. As the logfile shows: The parameters are added (the result is always
true
and the
getAllParamsNames()
shows all parameters(in the extension).
But when I enter the room, the parameters are gone.
And it is definitely the same room - I double checked the room-ID.
               IRoomInfoReader roomInfoReader =
                    (IRoomInfoReader) context.getOptionalValue(PARAMETER2_ID);
               log.println("Inforeader from context: " + roomInfoReader.toString());
               String l_roomID = roomInfoReader.getId();
               log.println("RoomID: " + l_roomID);
               log.println("RoomDesc: " + roomInfoReader.getDescription());
               boolean param1_success;
               boolean param2_success;
               IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
               try {
                    IRoom this_room = roomsAPI.getRoom(l_roomID);
                    // TODO: handle partial projects differently
                    log.println("EXTENSION: Parameterschleife (2!!)");
                    String[] allparams = this_room.getAllRoomParameterNames();
                    String paramname;
                    for (int i=0; i< allparams.length; i++){
                         paramname = allparams<i>;
                         log.println("EXTENSION: Raumparameter vor Anlage (neue Vorlage): " + paramname);
                    IRoomParameterValue l_parameter_wf =
                         TemplateDataFactory.createRoomParameterValue(
                              Workflow.WorkflowDynPage.ROOM_PARAM_WF,
                              "Workflowstate",
                              "3",
                              false);
                    IRoomParameterValue l_parameter_name =
                         TemplateDataFactory.createRoomParameterValue(
                              Workflow.WorkflowDynPage.ROOM_PARAM_WFNAME,
                              "Name of current Cycle",
                              "Name of Cycle not yet set",
                              false);
                    IRoomParameterValue l_parameter_dum =
                         TemplateDataFactory.createRoomParameterValue(
                              "Dummy",
                              "Proof of concept",
                              "could be working",
                              false);
                    param1_success = this_room.addRoomParameter(l_parameter_wf);
                    param2_success = this_room.addRoomParameter(l_parameter_name);
                    this_room.addRoomParameter(l_parameter_dum);
                    allparams = this_room.getAllRoomParameterNames();
                    if (allparams != null){
//                         for (int index=0; i<allParams.length; index++){
//                              debug += allParams[index];
                         List l = Arrays.asList(allparams);
                         Iterator it = l.iterator();
                         while (it.hasNext())
                              log.println ( (String) it.next());
                    else{
                         log.println( "kein Param vorhanden");
                    log.println( "Param adding. State: " + String.valueOf(param1_success) + " Name: " + String.valueOf(param2_success)) ;
               } catch (RoomInstantiationException e) {
                    log.println(
                         new java.util.Date() + ": " + "Room Instanciation failed. RoomID: " + l_roomID);
                    e.printStackTrace();
                    error = true;
               finally
                    log.println(
                         new java.util.Date() + ": " + "finished processing Extension");
                    log.close();

Similar Messages

User profile images not persisting after log off on Server 2012 R2 RDS Session Hosts

Hi,
We have a 2012 R2 remote desktop deployment, with two session collections, a gateway server, and connection broker.
We have set these session collections to use centralised user profile disks.
What I am having an issue with, is that when a user sets their profile image through the server they have logged on to (I have the desktop experience pack installed so they are able to do this), they can see the user tile has been set with that image in
settings and also on the start menu, but as soon as they log off the server and back on, their profile image has been reset to the default blank image.
I have checked all of my group policy options, and cannot find any settings that could be impacting this.
Does anyone have any ideas why these images are not persisting for users or admins?
Thanks, Eds

Please check that the user is not getting a temporary profile each time he logs in. Also, make sure that the RDP client is properly configured to display the Wallpaper: http://www.webapper.com/blog/index.php/2007/10/18/enabling-desktop-wallpaper-on-remote-desktop-terminal-services/
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

EJB 3.0 - JSF APPLICATION: DATA DOES NOT PERSIST TO THE DATABASE

Hi,
I am developing a JSF - EJB application and the data that I send from JSP Page through JSF Managed Bean --> Session Bean --> Java Persistence does not persist in database.
Here is my scenario ( Iam using JDeveloper IDE to create this application) -
SCENARIO START
The scenario consists of two web pages, one enlisting all the users stored in the database, the other contains a form for adding a user
1.) INDEX.JSP
2.) ADDUSER.JSP
Step 1: Create the USERS Table in database
CREATE TABLE users
user_id serial,
username varchar(255) NOT NULL,
first_name varchar(255),
last_name varchar(255),
password char(64) NOT NULL,
CONSTRAINT pk_users PRIMARY KEY (user_id)
Step 2: Add Database Connection To JDeveloper
Go to Database Connection Navigator and create a New Database Connection using the Wizard
Step 3: Create a New Application in JDeveloper and select JSF, EJB from Application Template
Step 4: ENTITY BEAN - In the EJB Node Right Click and Select EJB à New Entites from Table (JPA/EJB3.0)
Use The Wizard and create Entity Bean from Users Table which creates an Entity Bea POJO file as follows –
User.java -
package lux.domain;
import java.io.Serializable;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.NamedQuery;
import javax.persistence.SequenceGenerator;
import javax.persistence.Table;
@Entity
@NamedQuery(name = "User.findAll", query = "select o from User o")
@Table(name = "USERS")
public class User implements Serializable {
@Column(name="FIRST_NAME")
private String firstName;
@Column(name="LAST_NAME")
private String lastName;
@Column(nullable = false)
private String password;
@Column(nullable = false)
private String username;
@Id
@GeneratedValue(strategy=GenerationType.SEQUENCE, generator="users_seq_generator")
@SequenceGenerator(name="users_seq_generator", sequenceName="users_user_id_seq")
@Column(name="USER_ID", nullable = false)
private Long userId;
public User() {
public String getFirstName() {
return firstName;
public void setFirstName(String firstName) {
this.firstName = firstName;
public String getLastName() {
return lastName;
public void setLastName(String lastName) {
this.lastName = lastName;
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
public String getUsername() {
return username;
public void setUsername(String username) {
this.username = username;
public Long getUserId() {
return userId;
public void setUserId(Long userId) {
this.userId = userId;
Step 5: STATELESS SESSION BEAN - In the EJB Node Right Click and Select EJB à New Entites from Table (JPA/EJB3.0)
Again Right Click on Model and create Session Bean from Wizard which creates two files –
UserDAOBean.java – Stateless Session Bean
UserDAO.java – Local Interface
package lux.facade;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.util.List;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
import javax.persistence.Query;
import lux.domain.User;
@Stateless(name="UserDAO")
public class UserDAOBean implements UserDAO {
@PersistenceContext(unitName="Model")
private EntityManager em;
public UserDAOBean() {
public User getUser(int UserId) {
User u = new User();
u = em.find(User.class, UserId);
return u;
public List<User> getAllUsers() {
Query q = em.createQuery("SELECT u FROM User u");
List<User> users = q.getResultList();
return users;
public void createUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.persist(u);
public void updateUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.merge(u);
public void deleteUser(User u) {
em.remove(u);
private String hashPassword(String password) {
StringBuilder sb = new StringBuilder();
try {
MessageDigest messageDigest = MessageDigest.getInstance("SHA");
byte[] bs;
bs = messageDigest.digest(password.getBytes());
for (int i = 0; i < bs.length; i++) {
String hexVal = Integer.toHexString(0xFF & bs);
if (hexVal.length() == 1) {
sb.append("0");
sb.append(hexVal);
} catch (NoSuchAlgorithmException ex) {
Logger.getLogger(UserDAOBean.class.getName()).log(Level.SEVERE, null, ex);
return sb.toString();
Step 6: Create a Deployment file in the Model and Deploy this to a JAR file
Step 7: Now Right Click on View/Controller Node and create a Java File –
UserController.java -
package lux.controllers;
import javax.ejb.EJB;
import javax.faces.model.DataModel;
import javax.faces.model.ListDataModel;
import lux.domain.User;
import lux.facade.UserDAO;
public class UserController {
@EJB UserDAO userDao;
private User user;
private DataModel model;
public String createUser() {
this.user = new User();
return "create_new_user";
public String saveUser() {
String r = "success";
try {
userDao.createUser(user);
} catch (Exception e) {
e.printStackTrace();
r = "failed";
return r;
public DataModel getUsers() {
model = new ListDataModel(userDao.getAllUsers());
return model;
public User getUser() {
return user;
public void setUser(User user) {
this.user = user;
Step 8: Configure page flow in faces-config.xml
1. Create the JSP file adduser.jsp by right-clicking View-Controller
node and selecting New > JSP. Use the wizard to create JSF – JSP Page, fill in
File Name adduser.jsp, click Finish. -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>New user</title>
</head>
<body>
<f:view>
<h:form>
<h:messages/>
<h:panelGrid columns="2">
<h:outputText value="Username"/>
<h:inputText
id="Username"
value="#{user.user.username}"
required="true"/>
<h:outputText value="First name"/>
<h:inputText
id="FirstName"
value="#{user.user.firstName}" />
<h:outputText value="Last name"/>
<h:inputText
id="LastName"
value="#{user.user.lastName}" />
<h:outputText value="Password" />
<h:inputSecret
id="Password"
value="#{user.user.password}"
required="true" />
<h:panelGroup/>
<h:commandButton
action="#{user.saveUser}"
value="Save"/>
</h:panelGrid>
</h:form>
</f:view>
</body>
</html>
2. Repeat the previous step for another JSP file failed.jsp.
3. On failed.jsp add the string
Save failed
Next we configure the page flow.
1. Open faces-config.xml.
2. Create index.jsp -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>User Listing</title>
</head>
<body>
<f:view>
<h:form>
<h:outputText value="User Listing"/>
<h:commandLink action="#{user.createUser}" value="Create a user"/>
<h:dataTable value="#{user.user}"
var="dataTableItem" border="1" cellpadding="2" cellspacing="2">
<h:column>
<f:facet name="header">
<h:outputText value="Username"/>
</f:facet>
<h:outputText value="#{dataTableItem.username}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="First name"/>
</f:facet>
<h:outputText value="#{dataTableItem.firstName}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Last name"/>
</f:facet>
<h:outputText value="#{dataTableItem.lastName}" />
</h:column>
</h:dataTable>
</h:form>
</f:view>
</body>
</html>
3. Drag an arrow from index.jsp to adduser.jsp and replace the arrow’s label to create_new_user.
4. Repeat the previous step for failed, by dragging and arrow from adduser.jsp to failed.jsp renaming the label to f
ailed
5. Finally repeat the step for adduser.jsp, by dragging from adduser.jsp to index.jsp renaming the label to success.
This creates the following faces-config.xml file –
<?xml version='1.0' encoding='UTF-8'?>
<faces-config>
<managed-bean>
<managed-bean-name>user</managed-bean-name>
<managed-bean-class>lux.controllers.UserController</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>username</property-name>
<value>#{username}</value>
</managed-property>
<managed-property>
<property-name>firstName</property-name>
<value>#{firstName}</value>
</managed-property>
<managed-property>
<property-name>lastName</property-name>
<value>#{lastName}</value>
</managed-property>
<managed-property>
<property-name>password</property-name>
<value>#{password}</value>
</managed-property>
</managed-bean>
<navigation-rule>
<from-view-id>/index.jsp</from-view-id>
<navigation-case>
<from-outcome>create_new_user</from-outcome>
<to-view-id>/adduser.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/adduser.jsp</from-view-id>
<navigation-case>
<from-outcome>failed</from-outcome>
<to-view-id>/failed.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/index.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
Step 9: Create a Deployment file in the View-Controller and Deploy this to a WAR file
Step 10: Create a Deployment file in the View-Controller and create an EAR file and add Model’s JAR and View-Controller’s
WAR files to it.
Step 11: Run the JSP Files
SCENARIO END
Now, When I execute Index.jsp, it does not list values from database and when I click on Create User link, it takes me to adduser.jsp page. When I fill values in this page and click Save button, it takes me to Save Failed page and data does not persist to the database.
WHAT IS WRONG OUT HERE ???

If you set a breakpoint in your createUser method - does this code get executed?
We have a couple of tutorials that might show you how to do this.
EJB/JSF with ADF-binding tutorial:
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
EJB/JSF without ADF binding:
http://www.oracle.com/technology/obe/JavaEE_tutorial_10131/index.htm

JSF - EJB 3.0 Application - Data does not persist to the database

Hi,
I am developing a JSF - EJB application and the data that I send from JSP Page through JSF Managed Bean --> Session Bean --> Java Persistence does not persist in database.
Here is my scenario ( Iam using JDeveloper IDE to create this application) -
------------------------------------------------------- SCENARIO START
The scenario consists of two web pages, one enlisting all the users stored in the database, the other contains a form for adding a user
1.) INDEX.JSP
2.) ADDUSER.JSP
Step 1: Create the USERS Table in database
CREATE TABLE users
user_id serial,
username varchar(255) NOT NULL,
first_name varchar(255),
last_name varchar(255),
password char(64) NOT NULL,
CONSTRAINT pk_users PRIMARY KEY (user_id)
Step 2: Add Database Connection To JDeveloper
Go to Database Connection Navigator and create a New Database Connection using the Wizard
Step 3: Create a New Application in JDeveloper and select JSF, EJB from Application Template
Step 4: ENTITY BEAN - In the EJB Node Right Click and Select EJB � New Entites from Table (JPA/EJB3.0)
Use The Wizard and create Entity Bean from Users Table which creates an Entity Bea POJO file as follows �
User.java -
package lux.domain;
import java.io.Serializable;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.NamedQuery;
import javax.persistence.SequenceGenerator;
import javax.persistence.Table;
@Entity
@NamedQuery(name = "User.findAll", query = "select o from User o")
@Table(name = "USERS")
public class User implements Serializable {
@Column(name="FIRST_NAME")
private String firstName;
@Column(name="LAST_NAME")
private String lastName;
@Column(nullable = false)
private String password;
@Column(nullable = false)
private String username;
@Id
@GeneratedValue(strategy=GenerationType.SEQUENCE, generator="users_seq_generator")
@SequenceGenerator(name="users_seq_generator", sequenceName="users_user_id_seq")
@Column(name="USER_ID", nullable = false)
private Long userId;
public User() {
public String getFirstName() {
return firstName;
public void setFirstName(String firstName) {
this.firstName = firstName;
public String getLastName() {
return lastName;
public void setLastName(String lastName) {
this.lastName = lastName;
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
public String getUsername() {
return username;
public void setUsername(String username) {
this.username = username;
public Long getUserId() {
return userId;
public void setUserId(Long userId) {
this.userId = userId;
Step 5: STATELESS SESSION BEAN - In the EJB Node Right Click and Select EJB � New Entites from Table (JPA/EJB3.0)
Again Right Click on Model and create Session Bean from Wizard which creates two files �
UserDAOBean.java � Stateless Session Bean
UserDAO.java � Local Interface
package lux.facade;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.util.List;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
import javax.persistence.Query;
import lux.domain.User;
@Stateless(name="UserDAO")
public class UserDAOBean implements UserDAO {
@PersistenceContext(unitName="Model")
private EntityManager em;
public UserDAOBean() {
public User getUser(int UserId) {
User u = new User();
u = em.find(User.class, UserId);
return u;
public List<User> getAllUsers() {
Query q = em.createQuery("SELECT u FROM User u");
List<User> users = q.getResultList();
return users;
public void createUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.persist(u);
public void updateUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.merge(u);
public void deleteUser(User u) {
em.remove(u);
private String hashPassword(String password) {
StringBuilder sb = new StringBuilder();
try {
MessageDigest messageDigest = MessageDigest.getInstance("SHA");
byte[] bs;
bs = messageDigest.digest(password.getBytes());
for (int i = 0; i < bs.length; i++) {
String hexVal = Integer.toHexString(0xFF & bs);
if (hexVal.length() == 1) {
sb.append("0");
sb.append(hexVal);
} catch (NoSuchAlgorithmException ex) {
Logger.getLogger(UserDAOBean.class.getName()).log(Level.SEVERE, null, ex);
return sb.toString();
Step 6: Create a Deployment file in the Model and Deploy this to a JAR file
Step 7: Now Right Click on View/Controller Node and create a Java File �
UserController.java -
package lux.controllers;
import javax.ejb.EJB;
import javax.faces.model.DataModel;
import javax.faces.model.ListDataModel;
import lux.domain.User;
import lux.facade.UserDAO;
public class UserController {
@EJB UserDAO userDao;
private User user;
private DataModel model;
public String createUser() {
this.user = new User();
return "create_new_user";
public String saveUser() {
String r = "success";
try {
userDao.createUser(user);
} catch (Exception e) {
e.printStackTrace();
r = "failed";
return r;
public DataModel getUsers() {
model = new ListDataModel(userDao.getAllUsers());
return model;
public User getUser() {
return user;
public void setUser(User user) {
this.user = user;
Step 8: Configure page flow in faces-config.xml
1. Create the JSP file adduser.jsp by right-clicking View-Controller
node and selecting New > JSP. Use the wizard to create JSF � JSP Page, fill in
File Name adduser.jsp, click Finish. -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>New user</title>
</head>
<body>
<f:view>
<h:form>
<h:messages/>
<h:panelGrid columns="2">
<h:outputText value="Username"/>
<h:inputText
id="Username"
value="#{user.user.username}"
required="true"/>
<h:outputText value="First name"/>
<h:inputText
id="FirstName"
value="#{user.user.firstName}" />
<h:outputText value="Last name"/>
<h:inputText
id="LastName"
value="#{user.user.lastName}" />
<h:outputText value="Password" />
<h:inputSecret
id="Password"
value="#{user.user.password}"
required="true" />
<h:panelGroup/>
<h:commandButton
action="#{user.saveUser}"
value="Save"/>
</h:panelGrid>
</h:form>
</f:view>
</body>
</html>
2. Repeat the previous step for another JSP file failed.jsp.
3. On failed.jsp add the string <h2>Save failed</h2>.
Next we configure the page flow.
1. Open faces-config.xml.
2. Create index.jsp -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>User Listing</title>
</head>
<body>
<f:view>
<h:form>
<h1><h:outputText value="User Listing"/></h1>
<p><h:commandLink action="#{user.createUser}" value="Create a user"/></p>
<h:dataTable value="#{user.user}"
var="dataTableItem" border="1" cellpadding="2" cellspacing="2">
<h:column>
<f:facet name="header">
<h:outputText value="Username"/>
</f:facet>
<h:outputText value="#{dataTableItem.username}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="First name"/>
</f:facet>
<h:outputText value="#{dataTableItem.firstName}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Last name"/>
</f:facet>
<h:outputText value="#{dataTableItem.lastName}" />
</h:column>
</h:dataTable>
</h:form>
</f:view>
</body>
</html>
3. Drag an arrow from index.jsp to adduser.jsp and replace the arrow�s label to create_new_user.
4. Repeat the previous step for failed, by dragging and arrow from adduser.jsp to failed.jsp renaming the label to f
ailed
5. Finally repeat the step for adduser.jsp, by dragging from adduser.jsp to index.jsp renaming the label to success.
This creates the following faces-config.xml file �
<?xml version='1.0' encoding='UTF-8'?>
<faces-config>
<managed-bean>
<managed-bean-name>user</managed-bean-name>
<managed-bean-class>lux.controllers.UserController</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>username</property-name>
<value>#{username}</value>
</managed-property>
<managed-property>
<property-name>firstName</property-name>
<value>#{firstName}</value>
</managed-property>
<managed-property>
<property-name>lastName</property-name>
<value>#{lastName}</value>
</managed-property>
<managed-property>
<property-name>password</property-name>
<value>#{password}</value>
</managed-property>
</managed-bean>
<navigation-rule>
<from-view-id>/index.jsp</from-view-id>
<navigation-case>
<from-outcome>create_new_user</from-outcome>
<to-view-id>/adduser.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/adduser.jsp</from-view-id>
<navigation-case>
<from-outcome>failed</from-outcome>
<to-view-id>/failed.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/index.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
Step 9: Create a Deployment file in the View-Controller and Deploy this to a WAR file
Step 10: Create a Deployment file in the View-Controller and create an EAR file and add Model�s JAR and View-Controller�s
WAR files to it.
Step 11: Run the JSP Files
------------------------------------------------------- SCENARIO END
Now, When I execute Index.jsp, it does not list values from database and when I click on Create User link, it takes me to adduser.jsp page. When I fill values in this page and click Save button, it takes me to Save Failed page and data does not persist to the database.
WHAT IS WRONG OUT HERE ???

PLZZZZZZZZZzzzzzzzzzzz HELP ! ! !

EJB-JSF Application : Data does not persist to the database

Hi,
I am developing a JSF - EJB application and the data that I send from JSP Page through JSF Managed Bean --> Session Bean --> Java Persistence does not persist in database.
Here is my scenario ( Iam using JDeveloper IDE to create this application) -
SCENARIO START
The scenario consists of two web pages, one enlisting all the users stored in the database, the other contains a form for adding a user
1.) INDEX.JSP
2.) ADDUSER.JSP
Step 1: Create the USERS Table in database
CREATE TABLE users
user_id serial,
username varchar(255) NOT NULL,
first_name varchar(255),
last_name varchar(255),
password char(64) NOT NULL,
CONSTRAINT pk_users PRIMARY KEY (user_id)
Step 2: Add Database Connection To JDeveloper
Go to Database Connection Navigator and create a New Database Connection using the Wizard
Step 3: Create a New Application in JDeveloper and select JSF, EJB from Application Template
Step 4: ENTITY BEAN - In the EJB Node Right Click and Select EJB � New Entites from Table (JPA/EJB3.0)
Use The Wizard and create Entity Bean from Users Table which creates an Entity Bea POJO file as follows �
User.java -
package lux.domain;
import java.io.Serializable;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.NamedQuery;
import javax.persistence.SequenceGenerator;
import javax.persistence.Table;
@Entity
@NamedQuery(name = "User.findAll", query = "select o from User o")
@Table(name = "USERS")
public class User implements Serializable {
@Column(name="FIRST_NAME")
private String firstName;
@Column(name="LAST_NAME")
private String lastName;
@Column(nullable = false)
private String password;
@Column(nullable = false)
private String username;
@Id
@GeneratedValue(strategy=GenerationType.SEQUENCE, generator="users_seq_generator")
@SequenceGenerator(name="users_seq_generator", sequenceName="users_user_id_seq")
@Column(name="USER_ID", nullable = false)
private Long userId;
public User() {
public String getFirstName() {
return firstName;
public void setFirstName(String firstName) {
this.firstName = firstName;
public String getLastName() {
return lastName;
public void setLastName(String lastName) {
this.lastName = lastName;
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
public String getUsername() {
return username;
public void setUsername(String username) {
this.username = username;
public Long getUserId() {
return userId;
public void setUserId(Long userId) {
this.userId = userId;
Step 5: STATELESS SESSION BEAN - In the EJB Node Right Click and Select EJB � New Entites from Table (JPA/EJB3.0)
Again Right Click on Model and create Session Bean from Wizard which creates two files �
UserDAOBean.java � Stateless Session Bean
UserDAO.java � Local Interface
package lux.facade;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.util.List;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
import javax.persistence.Query;
import lux.domain.User;
@Stateless(name="UserDAO")
public class UserDAOBean implements UserDAO {
@PersistenceContext(unitName="Model")
private EntityManager em;
public UserDAOBean() {
public User getUser(int UserId) {
User u = new User();
u = em.find(User.class, UserId);
return u;
public List<User> getAllUsers() {
Query q = em.createQuery("SELECT u FROM User u");
List<User> users = q.getResultList();
return users;
public void createUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.persist(u);
public void updateUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.merge(u);
public void deleteUser(User u) {
em.remove(u);
private String hashPassword(String password) {
StringBuilder sb = new StringBuilder();
try {
MessageDigest messageDigest = MessageDigest.getInstance("SHA");
byte[] bs;
bs = messageDigest.digest(password.getBytes());
for (int i = 0; i < bs.length; i++) {
String hexVal = Integer.toHexString(0xFF & bs);
if (hexVal.length() == 1) {
sb.append("0");
sb.append(hexVal);
} catch (NoSuchAlgorithmException ex) {
Logger.getLogger(UserDAOBean.class.getName()).log(Level.SEVERE, null, ex);
return sb.toString();
Step 6: Create a Deployment file in the Model and Deploy this to a JAR file
Step 7: Now Right Click on View/Controller Node and create a Java File �
UserController.java -
package lux.controllers;
import javax.ejb.EJB;
import javax.faces.model.DataModel;
import javax.faces.model.ListDataModel;
import lux.domain.User;
import lux.facade.UserDAO;
public class UserController {
@EJB UserDAO userDao;
private User user;
private DataModel model;
public String createUser() {
this.user = new User();
return "create_new_user";
public String saveUser() {
String r = "success";
try {
userDao.createUser(user);
} catch (Exception e) {
e.printStackTrace();
r = "failed";
return r;
public DataModel getUsers() {
model = new ListDataModel(userDao.getAllUsers());
return model;
public User getUser() {
return user;
public void setUser(User user) {
this.user = user;
Step 8: Configure page flow in faces-config.xml
1. Create the JSP file adduser.jsp by right-clicking View-Controller
node and selecting New > JSP. Use the wizard to create JSF � JSP Page, fill in
File Name adduser.jsp, click Finish. -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>New user</title>
</head>
<body>
<f:view>
<h:form>
<h:messages/>
<h:panelGrid columns="2">
<h:outputText value="Username"/>
<h:inputText
id="Username"
value="#{user.user.username}"
required="true"/>
<h:outputText value="First name"/>
<h:inputText
id="FirstName"
value="#{user.user.firstName}" />
<h:outputText value="Last name"/>
<h:inputText
id="LastName"
value="#{user.user.lastName}" />
<h:outputText value="Password" />
<h:inputSecret
id="Password"
value="#{user.user.password}"
required="true" />
<h:panelGroup/>
<h:commandButton
action="#{user.saveUser}"
value="Save"/>
</h:panelGrid>
</h:form>
</f:view>
</body>
</html>
2. Repeat the previous step for another JSP file failed.jsp.
3. On failed.jsp add the string
Save failed
Next we configure the page flow.
1. Open faces-config.xml.
2. Create index.jsp -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>User Listing</title>
</head>
<body>
<f:view>
<h:form>
<h:outputText value="User Listing"/>
<h:commandLink action="#{user.createUser}" value="Create a user"/>
<h:dataTable value="#{user.user}"
var="dataTableItem" border="1" cellpadding="2" cellspacing="2">
<h:column>
<f:facet name="header">
<h:outputText value="Username"/>
</f:facet>
<h:outputText value="#{dataTableItem.username}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="First name"/>
</f:facet>
<h:outputText value="#{dataTableItem.firstName}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Last name"/>
</f:facet>
<h:outputText value="#{dataTableItem.lastName}" />
</h:column>
</h:dataTable>
</h:form>
</f:view>
</body>
</html>
3. Drag an arrow from index.jsp to adduser.jsp and replace the arrow�s label to create_new_user.
4. Repeat the previous step for failed, by dragging and arrow from adduser.jsp to failed.jsp renaming the label to f
ailed
5. Finally repeat the step for adduser.jsp, by dragging from adduser.jsp to index.jsp renaming the label to success.
This creates the following faces-config.xml file �
<?xml version='1.0' encoding='UTF-8'?>
<faces-config>
<managed-bean>
<managed-bean-name>user</managed-bean-name>
<managed-bean-class>lux.controllers.UserController</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>username</property-name>
<value>#{username}</value>
</managed-property>
<managed-property>
<property-name>firstName</property-name>
<value>#{firstName}</value>
</managed-property>
<managed-property>
<property-name>lastName</property-name>
<value>#{lastName}</value>
</managed-property>
<managed-property>
<property-name>password</property-name>
<value>#{password}</value>
</managed-property>
</managed-bean>
<navigation-rule>
<from-view-id>/index.jsp</from-view-id>
<navigation-case>
<from-outcome>create_new_user</from-outcome>
<to-view-id>/adduser.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/adduser.jsp</from-view-id>
<navigation-case>
<from-outcome>failed</from-outcome>
<to-view-id>/failed.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/index.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
Step 9: Create a Deployment file in the View-Controller and Deploy this to a WAR file
Step 10: Create a Deployment file in the View-Controller and create an EAR file and add Model�s JAR and View-Controller�s
WAR files to it.
Step 11: Run the JSP Files
SCENARIO END
Now, When I execute Index.jsp, it does not list values from database and when I click on Create User link, it takes me to adduser.jsp page. When I fill values in this page and click Save button, it takes me to Save Failed page and data does not persist to the database.
WHAT IS WRONG OUT HERE ???

If you set a breakpoint in your createUser method - does this code get executed?
We have a couple of tutorials that might show you how to do this.
EJB/JSF with ADF-binding tutorial:
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
EJB/JSF without ADF binding:
http://www.oracle.com/technology/obe/JavaEE_tutorial_10131/index.htm

I have imported an mp3 to my Library. I want to keep it as media kind = podcast but no matter how often I change the tag in get info options media kind, the change will not persist.

I have imported an mp3 to my Library. I want to keep it as media kind = podcast but no matter how often I change the tag in get info > options > media kind, the change will not persist, and the file remains in my Music list not my Podcast list.

Resolved in update.

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.

Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

Online course progress is not persistent

I'm doing the online course: Ref: WJB-110-SE6: Fundamentals of the Java(TM) Programming Language
I have completed several sections of this course. It seems that progress entries are not persistent from the previous session (after a logout followed by a login).
So, each time I log in, I have to start at the beginning again.
Please advise.

OldGrantonian wrote:
Please advise.I'd say [contact Sun Training directly|http://www.sun.com/training/contact_us/index.html]; you're likely to get a much faster, more authoritative answer that way.
~

Could not persist object with token:re00100000b7f6e12d419f(Error: INF)

Post Author: saravanan rangaraj
CA Forum: Migration to XI R2
Hi everybody,
I'm getting error, 'could not persist object with token:re00100000b7f6e12d419f(Error: INF)' while refreshing reports in infoview. If I logoff and logon it's working fine. The error repeats everytime after refreshing 3-5 reports.Can anybody say why it happens?

Post Author: saravanan rangaraj
CA Forum: Migration to XI R2
Hi everybody,
I'm getting error, 'could not persist object with token:re00100000b7f6e12d419f(Error: INF)' while refreshing reports in infoview. If I logoff and logon it's working fine. The error repeats everytime after refreshing 3-5 reports.Can anybody say why it happens?

Changes do not persists to DB?

Hi all,
I managed to configure coherence but changes that I made do not persists to DB?
My cache-config.xml:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
    <cache-mapping>
        <cache-name>*</cache-name>
        <scheme-name>distributed-eclipselink</scheme-name>
    </cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
    <distributed-scheme>
      <scheme-name>distributed-eclipselink</scheme-name>
      <service-name>EclipseLinkJPA</service-name>
          <serializer>
        <class-name>oracle.eclipselink.coherence.integrated.cache.WrapperSerializer</class-name>
      </serializer>
      <backing-map-scheme>
        <read-write-backing-map-scheme>
          <internal-cache-scheme>
            <local-scheme/>
          </internal-cache-scheme>
          
          <cachestore-scheme>
            <class-scheme>
              <class-name>oracle.eclipselink.coherence.integrated.EclipseLinkJPACacheStore</class-name>
              <init-params>
                <init-param>
                  <param-type>java.lang.String</param-type>
                  <param-value>{cache-name}</param-value>
                </init-param>
                <init-param>
                  <param-type>java.lang.String</param-type>
                  <param-value>HRPU</param-value>
                </init-param>
              </init-params>
            </class-scheme>
          </cachestore-scheme>
        </read-write-backing-map-scheme>
      </backing-map-scheme>
      <autostart>true</autostart>
    </distributed-scheme>
</caching-schemes>
</cache-config>I'm trying to use TopLink Grid Cache Configuration.
Thanks in advance.

Ah. I missed that. If you are using container managed transactions then you need to change from RESOURCE_LOCAL to JTA and set the target-server property. You also need a JTA datasource. Here's an example from http://wiki.eclipse.org/EclipseLink/Examples/JPA/WebLogic_Web_Tutorial#JTA_Datasource
Note that in an EE application there is no need to list your classes.
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="example" transaction-type="JTA">
    <provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
    <jta-data-source>OracleDS</jta-data-source>
    <properties>
      <property name="eclipselink.target-server" value="WebLogic_10"/>
      <property name="eclipselink.logging.level" value="FINEST"/>
    </properties>
</persistence-unit>
</persistence>--Shaun

The "Pin as app tab" produces tabs that do not persist across sessions. I have this problem on two installations, and it's really annoying (since the Permatab Mod no longer works in Ff4). Can you offer any assistance?

The "Pin as app tab" produces tabs that do not persist across sessions. I have this problem on two installations (PC and laptop, both running Win7), and it's really annoying (since the Permatab Mod no longer works in Ff4). Can you offer any assistance?

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"

Field that is not persistent in Entity class

Hi all,
I have entity class "Author" it has OneToMany relationship with "Article" Entity.
I want to create nbArticles in Author class, just is Long variable to get number of Articles created by this Author. That field is not persist just calculated from query, how can i define new field in Entity class without JPA manages persistance over it? Thanks.
PD: sorry for my English, im from South America
Best regards,

Thanks a lot.
Best regards,

Component parameters not showing

Hi - I have a series of components I've written in AS3 that work fine in CS3 & CS4. In the Flash CS5 authoring environment, the parameters are not visible in the Component Parameters section of the Property Inspector. The really strange thing is that if I create a .fla in CS4 with the same components on the stage, and then open that doc in Flash CS5, the parameters are visible and work.
Any ideas for how to fix this? What changed in CS5 to make them not work?
Notes:
I've rebuilt the .swc files in CS5 - doesn't fix it
I created an .mxp file for the components and installed with Adobe Extension Manager CS5 - doesn't fix it
The standard components that come with CS5 work fine
My components work fine other than not being able to access the parameters
Any help would be appreciated.
Thanks,
.phil

I think there are several problems going on in the change from CS4 to CS5 with regard to components. But I did find a fix to the problem I had, which is that in components that I built myself, inspectable parameters that worked fine in CS4 did not show up in CS5 (note that parameters moved their location in CS5 - in CS4 they were visible in the Component Inspector panel, in CS5 they accessible in the Properties panel).My components still worked, and were visible in the Components panel, just no parameters.
Here's the solution. When coding a component, you define your inspectable parameters in some code like this:
private var _controller:String = "arduino";
[Inspectable (name = "controller", variable = "controller", type = "String", enumeration="arduino,make,xbee,osculator,inputSource", defaultValue="arduino")]
Elsewhere in the code, you define your getter and setter functions:
public function get controller():String { return _controller; }
public function set controller(value:String):void {
   _controller = value;
   draw();
Based on the examples I had seen when I first started creating components, I put the definition right at the beginning of my class definition, and my getters/setters at the end. Well, in CS5, this approach does not work. To make inspectable parameters work, the definition and getter/setters functions must be together in the code! I put mine right at the end of the class. Like this:
private var _controller:String = "arduino";
[Inspectable (name = "controller", variable = "controller", type = "String", enumeration="arduino,make,xbee,osculator,inputSource", defaultValue="arduino")]
public function get controller():String { return _controller; }
public function set controller(value:String):void {
   _controller = value;
   draw();
Here's where I found the solution: http://f9foractions.tumblr.com/post/903211215/inspectable-parameters-not-showing-up-on-cus tom
Hope this helps!
If you are curious about my components, they are a free system to enable people to work with sensors etc. with the Arduino and other hardware in Flash with no coding required.
http://www.netlabtoolkit.org/
.phil

Parameters not found

I am trying to remove a dbf file from a project programmatically and in the code have loaded 2 variables. I then call the procedure thus:
Do mymanager.queryremovefile with var1, var2
The set procedure command is in the environment set up
The called procedure is in a program of collected procedures and reads thus:
procedure mymanager.queryremovefile
Parameters var1, var2
I get the error "parameters not found"
Am I having a mental block here?

What Bob says is also true. You can't DO a method in a class in a prg.
The project hook also doesn't work this way and you don't call QueryRemoveFile at all, it's an event happening.
You should have looked up, what a project hook class is.
Go into the project info and then check "project class" and pick a class from a vcx. So all your code must be in a VCX class, not a prg.
And then, if you remove a file from the project, the QueryRemoveFile event happens, you don't call it.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de

Light Room 4 does not recognize my Raw Images (NEF) for my nikon D810. Is there a fix to this problem?

Light Room 4 does not recognize my Raw Images (NEF) for my Nikon D810. How do I correct this issue so that I can import NEF files into lightroom 4

The D810 requires Lightroom 5.6 or newer. There is no way to import the NEF files into Lightroom 4. You can download the latest DNG converter and use it to create DNG copies that can be opened with Lightroom 4. Or, you can upgrade to Lightroom 5.

RoomExtension: Room manipulation (parameters) not persistent

Similar Messages

Maybe you are looking for