Rosettanet - Testing

Hi Experts,
Here is our question related to PIP4A3 in Rosettanet. Please help
We have configured 2 Scenario's. One with Sender as HTTP Adapter and Receiver as RNIF2.0 Adapter. Another Scenario RNIF2.0 as Sender and RFC adapter as receiver. Both these Scenarios exist in the same Rosettanet Compliant Sandbox system. So the Target URL of the Receiver RNIF of First scenario and Source URL of the sender RNIF of 2nd Scenario are the same (which is the Rosettanet Compliant Systems Messging system). While we were testing, the 2nd Scenario is being called but throwing an Error
**Message with PIP instance ID "ID number" already exists; PIP instance ID must be unique within the sender domain..**
Any idea of what error this is? Is it possible to have both these Scenario's in the same system? What is this PIP Instace ID and does it get Generated only once per system or something?
Appreciate your ideas on this
Thanks
Srini

Hello Guys,
Thanks for your ideas. I am testing using the same Rosettanet Compliant system which is the sandbox. So both the scenarios are in the same system and i am trying to call the 2nd one from the first one. In my case HTTP sends the data and my sandbox system receives it(RNIF Receiver configured). do we get a PIP Instance id ? and then it will call the 2nd Scenario where the sender is the Sandbox (RNIF sender) and receiver is R/3 (RFC Receiver)..do we get another PIP Instance ID here?
Please let me know if this configuration is right..if not what are the other ways using which we can test. We do not have Rosettanet business package or Self test kit.
Thanks
Srini

Similar Messages

One pi system as rnif sender and receiver

Hi,
I'm trying to implement a RosettaNet test-scenario for PIP3B2 using PI 7.1. Is it possible to send a RosettaNet message from a PI to the very same PI and also get the receipt aknowledgement from it?
Is there anything special I have to do?
Thanks in advance
Michael Forster

Hi Guys,
Thank you for ur reply
I believe this is a temp solution before the real hardware arrives...
Hence, dev can be ready by then but the point is that ther is ERP for dev, ERp for QA and ERP for Prod...
How can i connect the same Pi system to three different erp s??
as all scenarios have proxy...
Can u pls throw light on this?
Regards,
Teja
Edited by: Ravindra Teja on Sep 29, 2009 7:42 AM

Rosettanet Self Test Kit and XI

Hi,
We have developed some Rosettanet scenarios and now recently installed the Rosettanet Self Test Kit.
But we are finding it a bit confusing to link both XI and STK. How do we actually use the STK to test the scenarios with XI ?
ShaBZ ~~

I found this from one of the threads, a reply by Sam Raju;
>>>>>>
Part I. Test Using STK
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name> >> the server is my ip but then what is the port ? Also i am using the default user TesterA so is it the <Party Name>
4.2)In the location fields, enter your location and your partner location. >> your location and partner location -> can anybody elaborate ?
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
~~~~~~~~~~
We have developed scenarios for PIP3A4's and 3C3's in XI and need further help to test it.

Rosettanet tool testing.

Hi All,
Anybody worked on RSTK tool to test the rossettanet PIP messages need help in preparing test scripts for RSTK.....
Thanks in advance,
Srinivas.
Edited by: sri_rambo on Oct 29, 2009 6:43 AM
Edited by: sri_rambo on Oct 29, 2009 7:41 AM

/people/shabarish.vijayakumar/blog/2008/04/28/the-rosettanet-stk-and-how-to-use-it-to-your-advantage
not sure if this is what you are looking for. But does this help?

How to use pre-defined scenarios for RosettaNet with XI 3.0

Hi all.
 I am working in Comgroup Shanghai co. ltd. which is partner of SAP China.
 We have a potential customer who use RosettaNet as their Supply Chain EDI system.
 I would like to make a demo for demostrate the pre-defined scenarios for RosettaNet RNIF 2.0 packages.
 Where can I find such guideline ? I have checked the article: implementing RosettaNet with XI 3.0, but it cannot help me.
 Another question is how I can develop my own scenarios for the RNIF standards which are not included in XI RosettaNet business package ?

Hi Andy,
See the instructions below after you installed the RosettaNet STK.
Below given is the sample config for PIP3B2 Scenario. Part I is using STK and Part II is using 2 XI systems.
Part I. Test Using STK
In your XI ID:
1) Define both the parties 1) Shipper(Your Partner) 2) Receiver(Your company) with identifiers like DUNS Number.
2) In ID goto>Tools>Transfer Integration Scenarios from IR-->select the scenario "PIP3B2_Receiver" from the drop down list.
3) Follow the 4 steps in the config wizard.
4) While creating your CC, create it from the channel template delivered with the RosettaNet BP.
 4.1) Specify the URL for STK which should be in the following format
http://<STK Server>:<port>/rosettanet/servlet/listenerServlet?userId=<Party Name>
 4.2)In the location fields, enter your location and your partner location.
In your STK
1) Start the RosettaNet STK.
2) enter the UserID<Partner Name in XI>
3) Select the Test Scenario, 3B2V01.01-AdvanceShipmentNotification-0001-Scenario-Shipper
4) Enter Global Business ID(DUNS Number) and Location ID for both the partners. These fields should be same as in your R/3 Party configuration.
5) Enter the URL as follows:
http://<XI Server:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
If everything is configured correctly as mentioned, you should be able to test your single-action scenario.
Part II Test using another XI System
For these follow the steps above for XI Config.
Configure one XI System as PIP3B2 Shipper using the Scenario "PIP3B2_Shipper" and config wizard as mentioned above.
Configure the other XI as PIP3B2 Receiver using the scenario "PIP3B2_Receiver" and config wizard.
In the Url field, specify the URL as follows:
http://<XI host>:<J2EE_Port>/MessagingSystem/receive/RNIFAdapter/RNIF
Hope this helps.
Regards,
Sam Raju

Creating RosettaNet data types in XI 2.0: 'xml:lang' attribute

Has anybody successfully created a RosettaNet interface in XI 2.0?
I am working with the PIP 3A2 messages, but some of the elements have an attribute named 'xml:lang', which is a standardized attribute from the W3C's XML namespace. The attribute name is declared as 'xml:lang' because it's still a DTD-based PIP. Normally, in schema, this is handled by declaring an import of the xml.xsd file provided by W3C and defining the namespace alias 'xml' to point to it in the RosettaNet schema. The xml.xsd provided by W3C boils down to the following declaration, to support 'xml:lang' as an attribute...
<xs:schema targetNamespace="http://www.w3.org/XML/1998/namespace" xmlns:xs="http://www.w3.org/2001/XMLSchema" xml:lang="en">
<xs:attribute name="lang" type="xs:language">
</xs:attribute>
</xs:schema>
I'm trying to create this interface in the XI 2.0 data type editor, but...
1. I can't create attributes as standalone data types in alternate namespaces (to simulate the declarations in W3C's xml.xsd).
2. I can't link a standalone attribute declaration from another namespace to an attribute in the editor.
3. The editor prohibits use of a colon in the attribute name (as it should), so I can't declare the attribute name to be 'xml:lang'.
4. I can't figure out how to control the addition of a new namespace alias to 'xml'. The editor wants to use default names like 'p0' when I bring in types from other namespaces.
Can anyone suggest where I should look for an answer?
--Dan King
Capgemini

Hi Dan,
You can design and Test Rosettanet PIPS Messages in XI-3.0 only.
Regards
Prasad
SAP Netwaver RIG-XI
SAP Labs LLC, USA

RosettaNet STK

Dear experts:
I am using the Rosettanet STK. I want to send a test message from the STK and receive it in the XI system. But having problems especially with user id etc. How do I specify the user id and pw in the STK? I could not fing the file credential anywhere?
Appreciate your help.
Thanks

Thanks for the link Shabarish. My scenario is very similar to the one int he blog, except that its the other way round.. STK to XI.
I have set up everything as per the blog. Please see below for the config.
User ID - Shipper
Test Run ID - TestRun
Under "Component Under Test (CUT) Partner" section
Global Business ID - 000022222
Location ID - US
Message URL - http://sapxid.companyname.com:50000/MessagingSystem/receive/RNIFAdapter/RNIF
Under "Test system" the config is
Global Business ID - 000012345
LocationID - US
Message URL (automatically filled) - http://localhost/rosettanet/servlet/listenerServlet?userId=SHIPPER
When I click on the submit button I get the error message - CUT's UserId must not be null or empty
If I give the "Component Under Test (CUT) Partner" Message URL of the form
http://localhost/rosettanet/servlet/listenerServlet?userId=RECEIVER instead of XI's RNIF adapter path,
it atleast tries to post and then fails saying Receiver not reachable. So its something to do with the Message URL.
Can anybody clarify this please? Am I doing something wrong here?
Thanks
Karthik

Attachment in RosettaNet.

Hi all,
Can anybody provide me with a sample XMl used for attachments purpose sent along with payload in the properties file(enq_3a4_req.properties) in RosettaNet senario.
i have followed the link:-http://www.b2bgurus.com/search/label/Attachment
But i could not succeed as i could not understand how to send pdf or xml file as a attachment.
Please help
Regards
Rakesh

Hi All,
When i am giving Encoding as none(i.e., Encoding="none"). I am getting the following error
Description: An unexpected error occurred while forming attachment as component data
StackTrace:
Error -: AIP-51570: Form Attachment Error
 at oracle.tip.adapter.b2b.exchange.rnif20.HandleAttachment.formAttachmentAsComponents(HandleAttachment.java:136)
 at oracle.tip.adapter.b2b.exchange.rnif20.RNExchangePlugin.setupManifestInfo(RNExchangePlugin.java:2075)
 at oracle.tip.adapter.b2b.exchange.rnif20.RNExchangePlugin.createMessage(RNExchangePlugin.java:1324)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1641)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
 at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
 at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
 at java.lang.Thread.run(Thread.java:534)
My sample xml:-
<?xml version="1.0" encoding="UTF-8"?>
<B2BAttachment>
<Attachment ID="2144233" Type="application/pdf" Encoding="base64" Description="Description" FileName="test.pdf">file:///C:/OraHome/test/test.pdf</Attachment>
<Attachment ID="2144123" Type="application/ms-excel" Encoding="base64" Description="Description" FileName="test.xls">file:///C:/OraHome/test/test.xls</Attachment>
<Attachment ID="2142123" Type="application/text" Encoding="none" Description="Description" FileName="test.txt">file:///C:/OraHome/test/test.txt</Attachment>
<Attachment ID="2142123" Type="image/jpeg" Encoding="base64" Description="Description" FileName="flower.jpeg">file:///C:/OraHome/test/flower.jpeg</Attachment>
<Attachment ID="2142123" Type="application/jpg" Encoding="base64" Description="Description" FileName="test.jpg">file:///C:/OraHome/test/test.jpg</Attachment>
<Attachment ID="2142123" Type="application/xml" Encoding="none" Description="Description" FileName="clone.xml">file:///C:/OraHome/test/clone.xml</Attachment>
</B2BAttachment>
Please help
Regards,
Rakesh
Edited by: rakeshkumar on Nov 24, 2008 4:57 AM
Edited by: rakeshkumar on Nov 24, 2008 5:02 AM

How to download RosettaNet Business Package?

hi,expert:
How to download RosettaNet Business Package?
thanks

Hi
Refer these blogs
Business To Business Integration
/people/shailesh.mane/blog/2006/06/27/b2b-configuration-part-i--creating-an-integration-scenario
/people/shailesh.mane/blog/2006/06/29/b2b-configuration-part-ii--creating-the-configuration-using-the-automated-configuration-tool
General Business To business Integration Series
/people/james.guanzon/blog/2006/02/22/how-to-support-industry-standards-in-xi-part-i-of-iii--interfaces
/people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
/people/james.guanzon/blog/2006/09/09/how-to-support-industry-standards-in-xi-part-iii-of-iii--config-test
Mudit
Award points if it helps

B2B RosettaNet incoming messages throws error "Unable to read the preamble"

Hi,
We have configured Oracle B2B to send Invoices to TP using Rosettanet V2.0.
The incoming message are coming to B2B server via DMZ running apache HTTP server. We have security certificates installed on DMZ and has shared the public key with the TP.
TP has shared public key which we have installed on SOA server keystore.
We are able to see incoming messages in "Wire Message" tab, but the status is "processing". The SOA log file shows the error "Unable to read the preamble".
Any suggestion on this really appreciated.
Thanks,
Adarsh

The configuration that we have here is -
Outbound
SOA -> <Firewall> TP
Inbound
TP -> DMZ(SSL Enabled) -> FIREWALL -> SOA Server
SOA server is SSL enabled too, but the communication between DMZ and SOA has been configured on HTTP (non SSL). We shared the public key of DMZ server with the TP.
Here is the message that we are receiving from TP.
--27888100.1321681003096.JavaMail.webmethods@exshaw
Message-ID: <14801385.1321681003095.JavaMail.webmethods@exshaw>
Mime-Version: 1.0
Content-Type: multipart/related; type="application/xml";
boundary="----=_Part_6149_9357410.1321681003080"
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Preamble
Content-ID: <16966956.1321681003078.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE Preamble SYSTEM "Preamble_MS_V02_00.dtd">
<Preamble>
<standardName>
<GlobalAdministeringAuthorityCode>RosettaNet</GlobalAdministeringAuthorityCode>
</standardName>
<standardVersion>
<VersionIdentifier>V02.00</VersionIdentifier>
</standardVersion>
</Preamble>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Delivery-Header
Content-ID: <18073579.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE DeliveryHeader SYSTEM "DeliveryHeader_MS_V02_00.dtd">
<DeliveryHeader>
<isSecureTransportRequired>
<AffirmationIndicator>Yes</AffirmationIndicator>
</isSecureTransportRequired>
<messageDateTime>
<DateTimeStamp>20111118T223643.053Z</DateTimeStamp>
</messageDateTime>
<messageReceiverIdentification>
<PartnerIdentification>
<domain>
<FreeFormText xml:lang="EN">DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier>
</PartnerIdentification>
</messageReceiverIdentification>
<messageSenderIdentification>
<PartnerIdentification>
<domain>
<FreeFormText xml:lang="EN">DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>200103377</GlobalBusinessIdentifier>
<locationID>
<Value>Calgary</Value>
</locationID>
</PartnerIdentification>
</messageSenderIdentification>
<messageTrackingID>
<InstanceIdentifier>ac1aab8df70da53a000ca325</InstanceIdentifier>
</messageTrackingID>
</DeliveryHeader>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Service-Header
Content-ID: <27927869.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE ServiceHeader SYSTEM "ServiceHeader_MS_V02_00.dtd">
<ServiceHeader>
<ProcessControl>
<ActivityControl>
<BusinessActivityIdentifier>Invoice Notification</BusinessActivityIdentifier>
<MessageControl>
<fromRole>
<GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
</fromRole>
<fromService>
<GlobalBusinessServiceCode>Buyer Service</GlobalBusinessServiceCode>
</fromService>
<inReplyTo>
<ActionControl>
<ActionIdentity>
<GlobalBusinessActionCode>Invoice Notification</GlobalBusinessActionCode>
<messageStandard>
<FreeFormText>PIDX</FreeFormText>
</messageStandard>
<standardVersion>
<VersionIdentifier>1.0</VersionIdentifier>
</standardVersion>
</ActionIdentity>
<messageTrackingID>
<InstanceIdentifier>33323237303737323338343533343832</InstanceIdentifier>
</messageTrackingID>
</ActionControl>
</inReplyTo>
<Manifest>
<numberOfAttachments>
<CountableAmount>0</CountableAmount>
</numberOfAttachments>
<ServiceContentControl>
<SignalIdentity>
<GlobalBusinessSignalCode>Exception</GlobalBusinessSignalCode>
<VersionIdentifier>V02.00</VersionIdentifier>
</SignalIdentity>
</ServiceContentControl>
</Manifest>
<toRole>
<GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
</toRole>
<toService>
<GlobalBusinessServiceCode>Seller Service</GlobalBusinessServiceCode>
</toService>
</MessageControl>
</ActivityControl>
<GlobalUsageCode>Test</GlobalUsageCode>
<pipCode>
<GlobalProcessIndicatorCode>P21</GlobalProcessIndicatorCode>
</pipCode>
<pipInstanceId>
<InstanceIdentifier>PIPAC11165C133BA538E8A0000018B17B6C</InstanceIdentifier>
</pipInstanceId>
<pipVersion>
<VersionIdentifier>1.0</VersionIdentifier>
</pipVersion>
<KnownInitiatingPartner>
<PartnerIdentification>
<domain>
<FreeFormText>DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier>
</PartnerIdentification>
</KnownInitiatingPartner>
</ProcessControl>
</ServiceHeader>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Service-Content
Content-ID: <24309402.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE Exception SYSTEM "Exception_MS_V02_00.dtd">
<Exception>
<ExceptionDescription>
<errorClassification>
<GlobalMessageExceptionCode>PRF.ACTN.GENERR</GlobalMessageExceptionCode>
</errorClassification>
<errorDescription>
<FreeFormText>Errors: The Invoice Number entered already exists.; Warnings: Using default Supplier Site., Using default Supplier Group., Using default Supplier User., Units has been truncated.</FreeFormText>
</errorDescription>
<offendingMessageComponent>
<GlobalMessageComponentCode>ServiceContent</GlobalMessageComponentCode>
</offendingMessageComponent>
</ExceptionDescription>
<GlobalExceptionTypeCode>Receipt Acknowledgment Exception</GlobalExceptionTypeCode>
</Exception>
------=_Part_6149_9357410.1321681003080--
--27888100.1321681003096.JavaMail.webmethods@exshaw--

Operation Mapping Error while testing Configuration in ID

Hi Experts,
We are configuring a B2B interface using RNIF adapter to XI adapter. The RNIF adapter is the Sender adapter , which send data using XML format. XI adapter is the Receiver adapter for ECC. Message Mapping and Operation Mapping tests in ESR are running without any errors. But while testing Configuration Test in ID, we are getting the following error:
Interface Determination
| PIPP21_V020201_Seller | eInvoice_seller_RNIF | | PIPP21_V020201_Buyer
Sender
Communication Party
Communication Component
PIPP21_V020201_Seller
Outbound Interface
eInvoice_seller_RNIF
Namespace
http://ongc.co.in/xi/RosettaNet/PIPP21_V020201
Receiver
Communication Party
Communication Component
PIPP21_V020201_Buyer
RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_SLB_XSD2AProxy_ Thrown: com.sap.aii.utilxi.misc.api.BaseRuntimeException: The processing instruction target matching "[xX][mM][lL]" is not allowed. at com.sap.aii.mappingtool.tf7.Transformer.checkParserException(Transformer.java:172) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:141)
please do needful
Thanks
Laxman

Hi,
this means that you didn't copy the message correctly to the test tab in ID
try doing it once more - if it worked in ESR it has to work in ID in the same operation mapping
so it has to be a copy&paste error
Regards,
Michal Krawczyk

Rosettanet Receipt Acks URL ?

hi B2B gurus,
We are using RosettaNet protocol to transmit Invoices to our Trading Partner. We are able to send the documents to the TP, but our remote TP is not able to acknowledge the receipt. They get the error as below:
"HTTP/S send of action/signal failed...attempt retry - error sending HTTP/S message to https://b2btst.dummy.com/b2b : received HTTP response "500", retry is possible"
And our B2B portal shows the same error as "Error_level_collaboration", meaning the system did not receive any acknowledgement. Now what this means is the Acknowledgement URL which our remote TP is using is not valid.
Can someone please let me know, how do we determine the RosettaNet Acknowledgement URL that we need to share with our remote TP.
or
Do we need to configure a Listening Channel for this?
Thanks,
Rohit.

hi Anuj,
We tested this with our remote trading partner; our TP set the acknowledgement url as
https://b2btst.dummy.com/b2b/httpReceiver
When i try to simply open this url through the browser(outside the company network), it displays the below:
"B2B Server
B2B Server is ready to accept HTTP messages from the Trading Partner"
This means the server is reachable correctly.
Now on testing with our TP, they observed the following
– I do see 3 inbound POST’s, and in each case, our B2B server recorded the fact that it delivered the RA’s as expected. Seems like there is a break down somewhere between our delivery of RNIF RA and your B2B software recording the RA?
For this TP, our acknowledgement setups are as below;
Protocol - RosettaNet V02.00
Ack Mode - Async
Under TP>Channel Details>Security
Ack Signed is checked.
Message Signed and Message Encrypted is disabled.
Digital Signature - SMIME 3.0 with MD5 - RSA
Encryption - SMIME 3.0 with DES
Thanks a ton,
Rohit Varma.

RosettaNet Service Header in Packaged Message having some Tags as NULL

Hello B2B Gurus,
I need a help on B2B Integration (RosettaNet)
In the service header the highlighted tag is having NULL value when posted to TP. Can you please let me know, how to populate the below 2 tags.
<ServiceHeader>
<ProcessControl>
<ActivityControl>
<BusinessActivityIdentifier>Invoice Notification</BusinessActivityIdentifier>
<MessageControl>
<fromRole>
<GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
</fromRole>
<fromService>
<GlobalBusinessServiceCode>Seller Service</GlobalBusinessServiceCode>
</fromService>
<Manifest>
<numberOfAttachments>
<CountableAmount>0</CountableAmount>
</numberOfAttachments>
<ServiceContentControl>
<ActionIdentity>
<GlobalBusinessActionCode>Invoice Notification</GlobalBusinessActionCode>
*<messageStandard>*
*<FreeFormText>null</FreeFormText>*
*</messageStandard>*
*<standardVersion>*
*<VersionIdentifier>null</VersionIdentifier>*
*</standardVersion>*</ActionIdentity>
</ServiceContentControl>
</Manifest>
<toRole>
<GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
</toRole><toService><GlobalBusinessServiceCode>Buyer Service</GlobalBusinessServiceCode></toService></MessageControl></ActivityControl><GlobalUsageCode>Test</GlobalUsageCode><pipCode><GlobalProcessIndicatorCode>P21</GlobalProcessIndicatorCode></pipCode><pipInstanceId><InstanceIdentifier>PIPAC11165C1334BD831D6000001A534BD3</InstanceIdentifier></pipInstanceId><pipVersion><VersionIdentifier>1.0</VersionIdentifier></pipVersion><KnownInitiatingPartner><PartnerIdentification><domain><FreeFormText>DUNS</FreeFormText></domain><GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier></PartnerIdentification></KnownInitiatingPartner></ProcessControl></ServiceHeader>
Any help on this would be highly appreciated.
Thanks,
Sunil
Edited by: Dathu Sunil on Nov 1, 2011 6:19 AM

Hi,
I believe you are faceing this issue in B2B 11g. In B2B 11g these header values are not populated. But in B2B 10g they are work perfectly fine. Raise an SR for this issue

How to write Test Script for Rossettanet PIP message to test in RSTK tool.

Hi All,
I am new to RSTK i came to know that we need to prepare a test script and place in a Tomcat Server folder, to test any PIP message. Please let me know how we can prepare this Test Script.
Thanks alot in advance.
Srinivas.
Edited by: sri_rambo on Oct 27, 2009 8:08 AM
Edited by: sri_rambo on Oct 27, 2009 11:34 AM

Hi,
Did you check this blog?
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID1594031950DB00395255272980057387End?blog=/pub/wlg/3826
and this:
/people/shabarish.vijayakumar/blog/2008/04/28/the-rosettanet-stk-and-how-to-use-it-to-your-advantage
Regards,
ravi

RosettaNet and its Compatability with C-folders

Can I please get some info about RosettaNet and Its compatability with C-folders....
its urgent
regards
jay

I would imagine since SEEBURGER is involved in integration solutions
For 20 years, SEEBURGER has been the expert in SAP business integration. More than 1,200 SAP customers both large and small utilize our B2B/EDI solutions and expertise to connect with their applications and trading partners.
http://www.seeburger.com/index.php?id=sap&no_cache=1&sword_list[]=SAP
Unfortunately I have no way of testing but perhaps someone will see the new activity in the thread and pop in.

Rosettanet - Testing

Similar Messages

Maybe you are looking for