Rounding condtion type decimals

HI ALL,
I have a requirement where for eg: Condition type PR00 is with 50.45 it should round off to 50.00
or if it is 50.95 also inthat case also it should round off to 50.00
i tried doing rounding rule in conditon type, it is only rounding the decimals
i dont want any decimals
Please let me knw if any one has the answer
Syed

Hello,
In transaction V/06 there is a field under header 'Control data1' which can effect how the system rounds off condition values during pricing:
   ->> Rounding rule
       The rule that determines how the system rounds off condition
       values during pricing. The last digit will be rounded.
Example
o In the standard rounding rule '_', values are rounded off according
   to business standards:
   10.454 -> 10.45 DEM
   10.455 -> 10.46 DEM
o In rounding rule 'A', values are always rounded up:
   10.459 -> 10.46 DEM
   10.451 -> 10.46 DEM
o In rounding rule 'B', values are always rounded down:
   1045.9 -> 1045 LIT
   1045.1 -> 1045 LIT
Please try using the rounding rule 'B' for your scenario.
I hope you find this information very helpful and hopefully it will solve your problem.
Regards,
Martina McElwain
SD - Forum Moderator

Similar Messages

CIN Higher Education cess condtion type for service

Dear All
SD CIN Experts Pls let me know the Tax condtion type for Higher Education Cess for service
thank
mujju

There is no condition type for Higher edn cess in the standard system. SAP suggests creation of a neew one and assiging it to AT1. So go ahead and create a condition type by copying the ECS condition type and renaming it. Ensure that you tick the laible for At1 to be ticked and also in the deafault condition types put the Condition type in the AT1 field. Also do the account detemination for AT1 accounts for Rg23A,C and PLA. This will configure the S&H ECS.
regards
Jude

Why Captivate dont let you type decimals as apart of the reporting points?

If I have 15 questions on my test, how much is each question worth. You cant type decimals as points in the reporting section.
Please help. Thanks

Hi all
Apologies if this has already been pointed out, but I don't think it has.
Things such as this that are viewed as shortcomings really need to be brought to Adobe's attention. After all, they are always working on the next version or the next patch. And if nobody says anything they may well believe that there simply isn't an issue to be addressed.
If you would like to see this changed at some future point, please submit a Wish Form/Bug Report (same form is used for both and the link to the form is in my sig)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to Default Condtion Type

Dear All,
I have a new condtion type created through IMG, i want it to be defaulted on all PO, i tried setting it throught the Calculation Schema, but while testing, i had to manually enter the Condition type.
I have maintained scales for this condition type through MEK1.
Can any one please advice how to go about this.
Regards,
LUX

Hi Annak,
Have you selected indicator ' Manual' in calculation schema.
If this indicator is selected , you have to enter condition types manually.
regards

JMO1 condtion type value from tax code of me23n

Hi Experts,
where to get the values for condtion type JMO1, JEC1, JIP1 etc.., in tax code of me23n. where the net value of the contion type is only stored in the ztax condtion type.
Please guide me get the individual vaules of all the condition type available in ZTAX.
Thanks in advance for your help.

Hi
Tax condition s same for all..Not for me22n.
U go and check jv12..what condition type they mained in ur comapny...Taxes are maintain based on ur company.
U to jv12 and chk JM01 condition type maintained..Then u understand.
Regards;
Prabu
Edited by: Prabu Kannappan on Sep 16, 2008 1:02 PM

Condtion type error when create SO

Now I want to do rebate, and I assign condition type BO02 to pricing table ZA0001 through tr-cd V/08. But when I create Sales order it is still give error as condtion type BO02 is not assigned to A V ZA0001. I tried to assign some other condtion type to this pricing table then it works fine.

Hi Cherry,
i think you created this pricing procedure copy of RA0001 where for BO02 is having requirment type 24 which is used only in BILLING DOCUMENT.
and you might be getting this error becouse you might have marked this condition as MANDATORY but becouse of reuqirment type not getting determined in Document.
it will be great if you can send us ERROR NO

Rounding to nearest decimals

Hi all programmers,
I am a FICO functional consultant. I have got an issue that I think and was told that it can be solved by an ABAPer. The issue is described below:
"I am encountering a serious production issue. On the FB60 screen when I enter the amounts in the line items and select the the respective tax code, my system calculates the tax amount as $0.06 where as when I calculate on my calculator it is coming up as 0.0565. Because of this my total balance is offsetting by 1 cent ($0.01). I want my SAP system also to round off to $0.0565 instead of $0.06. Is there any way to do this setting. I know I can change the value manually under tax tab. But, there are so many invoices like this and calculating the tax manually and then entering the right decimal value in the tax tab will not serve my purpose."
Being a functional person and with no ABAPer's support, I request you guys to please help me from scratch (inclusing which t.code to use) on solving this issue by changing or creating a programming routine.
<b><REMOVED BY MODERATOR></b>
Thank you,
SONY
Title and Message were edited by:
Alvaro Tejada Galindo

Hi,
Please try this to create program routine.
DATA: N1 TYPE P DECIMALS 4 VALUE '0.0565',
N2 TYPE P DECIMALS 2.
MOVE N1 TO N2.
WRITE: N2.
Regards,
Ferry Lianto

Sales order item quantity not rounded and allowing decimals with UoM EA

Hi gentlemens,
I noticed something strange in our SAP ERP system.
When we enter a material in a new sales order item, we are allowed to enter quantity 1,5 EA (1 and half Each).
But when I check the config of the UoM EA in table T006, the number of decimals (field DECAN) is 0 and the decimal place for rounding (field ANDEC) is also 0.
As far as I remember from other other SAP system, there should be an error message when entering the quantity 1,5 EA saying that decimals are not allowed for this unit of measure.
Can someone help and tell me wich error message or which rounding program should normally be active when entering decimals with uom EA ?
Thanks and regards,
BDT

Hi Mani,
Thanks for the thread reference. I found the related OSS notes yesterday evening but this was for procurement.
Here the question I have is more for a sales item.
The strange case we are facing is:
In a sales order, we can enter a particular material as a standalone item with a quantity of 1.5 EA without any problem.
But if we create the same new item as a sub-item of a previous one (filling UEPOS), with qty 1,5 EA, then a rounding is triggered by the system based on the T006 config.
I am wondering if this is a problem with the SAP standard program or if we did anything wrong in the past in our system?
Best regards,
BDT

Rounding % to zero decimals

Hi,
I have requirement to find the percentage of row(rowvalue/grandtotal). To get this I used pivot table and have taken the values as percentage of row. But in the same the user wants to have zero decimals. Is it possible to round off percentage values in Pivottable?
Thanks,
Phani.

Phani,
Look at:http://shivabizint.wordpress.com/2008/09/14/changing-the-precession-of-percent-of-columns-in-pivot-table-of-obiee/
thanks,
Saichand.v

How to convert 3.16 to 3.20 in tables? Round only the decimals?

In a recent post mr Trevor wrote a powerful script to round decimals but altering the preceding number:
23.45 was converted to 23.
23.78 to 24.
It is possible to script only the decimals not touching the integer?
,03 : 00
,06 : 10
,14 : 10
,18 : 20
,71 : 70
,77 : 80
Etc?

Hi, thank you.
As numbers are placed on tables, how to apply this script to the whole document?
It is necessary to make a list?
Or it may be used with a skeleton like this wrote by Trevor?
var doc = app.activeDocument;
app.changeGrepPreferences = app.findGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\d+\,\\d+";
var myNumberFinds = doc.findGrep(),
      l = myNumberFinds.length;
while (l--)
        app.changeGrepPreferences.changeTo = Math.round(myNumberFinds[l].contents.replace(/\,/,".")).toString();
        myNumberFinds[l].changeGrep();
Yes, numbers between ,094-0,99 will afect the integer!
Thank you.

Rounding Condition Types

Hi guys
I have a requirement that in my pricing procedure I want the condition type which can round off the total vale if it is having any fraction value in the sales order. I have used some condition type like RNTP & RNTM, DIFF but couldnu2019t able to get right answer.
So please provide me right information relating too all the above Condition Types.

Dear Chandra
Try with this
For the net value field, give Routine 16 in the Alt. Cal. Type in the pricing procedure. Addition to the above setting also add Routine 17 to Netvalue.
thanks
G. Lakshmipathi

Value of a condtion type cannot book to a G/L account

I have condition type called Z001 and Z002 which is assigned to an account key Z01 and Z02 in the pricing procedure respectively
I have also assigned a G/L account to each of the account key using a combination of customer account assignment group, material account assignment group and account key
Application Type (V), Account Determinaton Type (ZAC1), Chart of Account (C01), Cust Acc Assignment Group (01), Material Acc Assignment Group (01), Account Key (Z01) -> G/L Account (70000001)
and
Application Type (V), Account Determinaton Type (ZAC1), Chart of Account (C01), Cust Acc Assignment Group (01), Material Acc Assignment Group (01), Account Key (Z02) -> G/L Account (70000002)
However, when I release the billing to FI, I found that in the account doc, there is only posting on G/L Acc 70000001, but nothing for 70000002. In the acct determination analysis, I can see only the analysis on condition type Z001.
Is there any configuration that I have missed? Please help. Thanks a lot!

Hi,
The configuration part looks to be ok !! But just check the G/L account you have mentioned, the second one which does get booked, see if it configured in a way to accept the value returned by the condition.
Check in the order item conditions, the value returned by the z condition not getting booked.
Hope it helps.
Thanks & Regards
Sadhu Kishore

Usage of Static condtion type for CO-PA

Hi All,
In our implementation, due to backward, forward pricing procedure calculation & some condition type possesses balance sheet account codes as account keys, for costing based CO-PA we have prepared static condition type in all procedure & attached with value fields.
I hope this procedure is correct . Pl. suggest.
Rgds
SMK Ganesh

Hi Ganesh,
I believe you are referring to statistical condition types. In costing based COPA we always pass statistical SD conditions to COPA provided they are mapped in KE4I.
Please refer note 20254 for additional info
regards
Waman

Duplicate condtion types accepting in item condition (interesting)

Hi Sap Guru's,
When i am entering manual condition type in item condition type column Ex: PR00 basic price 2000/Rs, and again i am entering same condition type PR00 basic price 1000/Rs the system accepting same condition type ?? is there any standard setting to eliminate duplicate condition types in item condition (sales order)
Point will be rewarded to Everyone for helpful solutions.
Thanks & Regards,
San Rao

Hi ,
System will considered if the validity periods are diffrent,
one ,in condition Type controls you have one option ,manual entries ha priority ,changes which u can made Through this u can control.
Making manual entries
Indicator which controls the priority within a condition type between a condition entered manually and a condition automatically determined by the system.
&WHAT_TO_DO?
Make the following entries according to your requirements:
_: No limitations
A: Freely definable
B: The automatic entry has priority. If a condition record exists, the condition cannot be entered manually.
C: The manual entry has priority. When you enter the condition
manually, the system does not check whether a condition record exists.
D: Cannot be processed manually
With best regards,
venkataswamy.y

Rounding to nearest decimals--VERY URGENT

Hi all,
I am encountering a serious production issue. On the FB60 screen when I enter the amounts in the line items and select the the respective tax code, my system calculates the tax amount as $0.06 where as when I calculate on my calculator it is coming up as 0.0565. Because of this my total balance is offsetting by 1 cent ($0.01). I want my SAP system also to round off to $0.0565 instead of $0.06. Is there any way to do this setting. I know I can change the value manually under tax tab. But, there are so many invoices like this and calculating the tax manually and then entering the right decimal value in the tax tab will not serve my purpose.
PLease help me with this as it is a very urgent issue.
I would surely award points for any kind of positive help.
Thank you,
SONY

Hi,
As far as my knowledge goes SAP bydefault rounds off to 2 digits. If you want any changes in that you will have to take the help of ABAPer and write the routine to change the number of decimal points.
Regards
Santosh Hegde

Rounding condtion type decimals

Similar Messages

Maybe you are looking for