Route Finder Front End

I posted a message earlier asking for help designing a front-end to a back end i had written in java.
i asked anyone whether or not they would help me design a really basic front end given the source code...
for any that missed it as well as the person who did reply i have included my e-mail address here:
[email protected]
if anyone would like to help me at all please e-mail me and i can send out the code and hopefully get some help in return...
I know this is really cheeky but having written java for a while i am really new to the front ends and am not getting very far.... so any help now i would be extraordinarily grateful for...
thanks, hope to hear from someone soon !!

Similar Messages

Data is visible in base tables of BOM routing but not visible in front end

Hi,
Through BOM_RTG_PUB API I am populating routing data into base tables, it is successfull.. but that data is not visible in front end when i queried from front end..
i am getting error while i run API as......
An error occured while processing business object BOM_ITEM12 in organization MMO. Please check the data in this business object and re-run the import process.
Can any one help me in finding out what's wrong with this..
Thanks in advance..
Edited by: 875417 on Feb 6, 2012 10:49 PM

Your obeservation is correct, and expected behavior.
This behavior is useful when you have inputs that you would like to set as defaults for the user.
Obviously, if there is a value to be saved, it will require some memory to store the value.
If the input is left empty by default, that memory is made available again.
It may not be easy to think of a good use for this for a graph, but think about for numeric or string controls.
What if the user isnt sure how they should input a certain parameter or value?
You could store a default value so they could see how they should input their value.
Message Edited by Cory K on 09-15-2009 11:12 AM
Cory K

How to find out the names of front-end servers in Apps ?

Hi,
In the setup wherein we have mutiple front end servers (Apache running on all nodes, CM running on one of them, Forms server running on one/more of them etc ..) is there any way to know the node-names ?
FND_NODES table lists only the CM node name
FND_APPLICATION_SERVERS from 11.5.9 onwards doesnt have any info I guess
What is the find this out
Thanks

"wherever the parameter is set to YES it means this is the node you are looking for "My question is
I do not know the node names itself
And thats what I am looking for
We have very huge setup with mutiple instances and I was not part of the implementation team
Each Apps instance has about 4 or 5 front ends. They are in the farm setup over the NAS
I need to know the names of these 4 / 5 servers for each instance
Apart from asking the senior / old-timer DBAs in the team or the documentation or asking sysadmins, is there any way from the 11i Apps metadata information, I can get this info
FND_NODES in this farm type of setup just shows the name of the load balancer virtal server to which all these 4 or 5 servers point to
But not the actual names of the servers

Is there a way to find out details about, who approved the RMA on system using front end or back end?

Is there a way to find out details about, who approved the RMA on system using front end or back end?

But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio

How do web front ends find the configuration database (moving whole farm to new AD forest)

We are exploring, as a possible course of action, moving our SharePoint 2007 medium farm to a different Active Directory forest (2008). There is a two way transitive trust between the source and target domains.
I have established that with such a trust it's possible to add content databases on a SQL instance in another forest, so moving content is not a big issue; we'd stand up new instances and move them: the user accounts are almost all in the target domain anyway.
However, we have a good deal of customization, including a third-party application that no longer has any support and has historically been appallingly difficult to upgrade/install fresh.
How do web front end servers find the SQL instance containing the configuration database? If the farm credentials had been previously changed to an account in the target domain, all services stopped and the configuration database moved to a new instance
with a DNS alias, would the database appear to be in the same location when SQL and SharePoint services were started on (logically) moved web front ends?

Here is more or less the high-level process for SharePoint 2007:
Mid- to high-level steps.
0. Full farm backup
1. Move users to new domain (in AD). Use stsadm -o migrateuser to migrate the old domain accounts to the new ones in SharePoint
2. Move service accounts to new domain, or create new service accounts
3. Update the farm to use the service accounts in the new domain
stsadm -o updatefarmcredentials (service accounts)
stsadm -o spsearch -farmserviceaccount
stsadm -o spsearch -farmcontentaccessaccount
stsadm -o editssp -ssplogin (for each ssp)
stsadm -o osearch -farmserviceaccount
SSO and any other remaining service accounts (CA -> Ops -> Service Accounts)
Default content access account (SSP -> Search Settings -> Default content access account)
Customizations (if there are service accounts associated with these)
3.5 Manual steps
Application pool accounts
Update permissions for SQL Logins to make sure the new accounts match the permissions for the old accounts
Add the appropriate new accounts to the DCOM IIS WAMREG Admin Service
4. Update the SQL Server service accounts. If SQL Server is shared with other applications you'll want to update the SQL Logins for these other applications as necessary and the SQL Server service accounts (DB Engine, DB Agent, Reporting Services, etc.). Might
not be necessary if this has already been done or if the SQL server is not changing domains.
5. Shut down all services on all servers in the farm (this includes SQL if you are moving to the new domain).
6. Change domain membership of all farm servers, reboot or perhaps shutdown and bring back up in the following order:
1. SQL. Verify SQL Server is running and accessible. Check event logs. Resolve any issues.
2. Central Admin server. Verify CA is accessible, check event logs. Web apps and some services may not be available if they are on servers that are currently turned off. Don't worry about these (yet).
3. Application servers, search servers, index, query, other. It's likely some or all of the WFEs will go on at this step. Verify services are accessible as expected. Check event logs. Resolve issues.
4. Any remaining WFEs. Wash, rinse, repeat.
7. Assuming everything is running as expected, users can access the sites, the sky did not fall, etc. take a full farm backup.
Hey look, here are some low-level steps too.
# updates the account used to run the CA app pool and the timer service
# must be run on the server that hosts CA
stsadm -o updatefarmcredentials -identitytype configurableid -userlogin NEWDOMAIN\farm_service_account -password Password123
# spsearch
stsadm -o spsearch -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123 -farmcontentaccessaccount NEWDOMAIN\crawl_service_account -farmcontentaccesspassword Password123
# osearch
stsadm -o osearch -farmcontactemail [email protected] -farmserviceaccount NEWDOMAIN\search_service_account -farmservicepassword Password123
# ssp service accounts
stsadm -o editssp -title SSP -ssplogin NEWDOMAIN\ssp_service_account -ssppassword Password123
# Manual steps
SSP Admin -> Search Settings -> Default Content Access Account
Application pools: CA -> Operations -> Service Accounts -> Web Application Pool (or use gl-updateapppoolaccount if available)
iisreset /noforce
Copy SQL permissions to the new accounts. Not sure why this doesn't happen.
SSP Service Account
Farm Account
Setup Account (not copied because it doesn't own anything, just used to kick off the DB for the other accounts)
Search Service
Add accounts to DCOM not sure why this didn't happen
Component Services -> Computer -> My Computer -> DCOM Config -> IIS WAMREG Service
Farm account
Application pool accounts
Search Service
SSP Service
SSP Admin
Then the fun part. Move the server into the new domain.
Check for AAMs to see if they reference the current domain. If so, change to the new one.
Stop all SP services. Join new domain.
The computer name is a netbios name in SP, this should be painless.
Some general notes from my experience doing this:
1. There is no way to update application pool identities with stsadm (I haven't explored using Powershell). You have to go through CA -> Service Accounts to update these.
2. Some SQL logins and permissions were not created. I compared the permissions before to the permissions after and copied the ones that didn't transfer. This resolved all database access issues.
3. Had to grant permissions for the service accounts in the DCOM configuration for the IIS WAMREG admin service. I expected this to happen automatically but was not surprised given the history of CLSID 61738644-F196-11D0-9953-00C04FD919C1.

How to find the CPU utilization from the portal front end

HI Guys,
I want to find the CPU utilization from the portal front end browser screen.Can you please let me know how to find this and also the path to find it.
And how to find the CPU utilization from the server.What is the command to find the CPU utilization at unix level.
Regards,
Krishnam.

hi you can create transient field in view object indicate to visibility of row (boolean ) and create view criteria that show only rows that are able to be visible according to transient attribute and at the update process set the attribute to true inside entityImpl class

Fields for creation of BP in cProjects front-end are read-only

Hi everyone,
I'm a beginner in SAP-Development/Customizing so I hope this question isn't too easy
I can't create a Business Partner using the cProjects front-end (Ressources > Staffing) because the necessary fields and buttons are read-only... (> web-Dynpro Component: DPR_ROL_STAFF; View-Info: VI_SEARCH_CREATE)
I'm using CPRXRPM 450_700 patch 0006
The field-control is standard-SAP (0SAP).
My user-account has all cProject-roles + SAP-ALL
I assume i can change the behaviour of these fields in the Field Control but I can't identify which is the corresponding Object Category to apply the changes.
- Is there a documentation which field belongs to which Object Category in Field Control?
- Or can somebody tell me a procedure to find it out on my own?
Thanks in advance

Hi,
generally it is recommended to use transaction BP or ALE distribution to get the business partner be created.
If you would like to create the BP in web UI directly, the user must have the Structural Authorization, see customizing path:
Collaboration Projects -> Resource Management -> Organizational Management.
It is very HR related topic, you may contact a HR consultant to know more details about it.
Kind regard,
Zhenbo

Front end components are needed for LSO

Dear experts,
We want to implement Training & Eventmanagent in ESS portal. I searched in sdn .But i didn't get proper solution. It seems from EHP5 onwards these services /iviews are obsolete and TEM is repleced by LSO only.
for LSO Implementation which Business Package and portal components I need to be installed and which Add on to be installed in Application server.
our landscape: portal: NW EP 7.01 ehp2 , ess wda1.50 sp5, mss bp 1.51 sp5
R/3-----ECC 6.0 EHP5
please suggest me regarding Front end Software Components with SP's for LSO implementation.
Thanks
veeranji

note that
Usage of the learning solution landscape would be captured in the
report as a engine metric. There is no need to set a pricelist and
a user type.
All users logging into the SAP systems irrespective of the modules,
need to be classified under the contractual user types :
ERP Developer - BA
ERP Professional user - AX
ERP Limited Professional user - AY
depending on the activities of the users matching with the usertype
definition.
service.sap.com -> SAP Support Portal -> Downloads -> SAP Support
Packages -> Support Packages and Patches - Entry by Application Group ->
SAP Application Components -> SAP ERP -> SAP ERP ENHANCE PACKAGE -> EHP4
FOR SAP ERP 6.0 / NW7.01 -> Entry by Component -> Portal Content
Here, you will find the two BPs:
BP ERP INSTRUCTOR & TUTOR 1.41
BP ERP TRAINING ADMIN 1.40
Business Package for Learning (SAP ERP) 1.0 (PE-LSO-LPO)
and check here
http://help.sap.com/erp2005_ehp_04/helpdata/en/43/9065e6d9f521a6e1000000
0a1553f6/frameset.htm

How to implement Oracle user/role security with Access front end?

Hi,
We have successfully migrated our Access database tables to Oracle 10g using SQL developer. We've recreated all the users and roles(i.e., access groups) in Oracle and granted rights to tables.
In the Access front end database, in the Database window we have saved linked Oracle tables which replaced the Access tables. The forms, reports, queries run fine with the linked Oracle tables. All the linked table use one ODBC DSN to the Oracle database with the same Oracle user id.
We need to be able to authenticate users into the Oracle database and RE-link the tables based on their own unique user id. By during so we can allow users to use the Oracle standard user id/role and system privileges to control select, update, ect. rights to the database.
I've been able to use the VB code within Access to logon into the database with a unique id, but I have not been able to find out how to RE-link the tables to the unique user id using VB. There should be some way to relink tables dynamically, based on users login into the Access front end.
I don't know a great deal about Access projects, but I do know with SQL server allows login into your Access project and link tables dynamically.
Can someone give me some assistance or point me in the right direction?
Thanks in advance,
Larry

We had one of our programmers here come up with a VB code solution for re-linking table within Access. However the relinking takes 3-4 minutes for 100+ tables.
In an effort to help you understand the situation better, I will attempt to elaborate on the problem:
We have an Access 2003 application which currently has a front end using Access(forms, reports, queries, & VB code) and a MS Access 2003 backend.
We have migrated the backend tables to Oracle. However, we still have a need to maintain the front end in Access, since we have over 60 forms, 40 reports, 200+ queries in Access. Its easy to understand, we have a significant investment in the front end(Obviously, the plan is to migrate the front end also at some future date).
In order to utilized the existing front end, we have to validate and modify the current front end connections to the new Oracle backend. One of the features of Access is that you can "link" tables and save the link for runtime. Each Access table can have its own link which is a separate ODBC/JET connection. As such, each separate link has its own userid/database information.
The other issue with using the Access front-end is that Access utilizes a workgroup file to implement user and group security. The workgroup file contains all the users and which groups the users belong to in Access. Then within Access, you allow users access to object(tables, queries, ect) by their userid and or group. When users open an Access database with Access security enabled, they are required to log into Access. The login is authenticated by the workgroup file. Once, logged into Access, users have rights to Access objects based on their rights granted to their userid and groups they belong. The problem here is that when you remove the linked Access tables and replace them with linked Oracle tables, Access has knowledge about Oracle table rights granted to users; nor would you expect it to.
The dilema is the disconnect between Access and the fact Oracle utilizes a similar but much more sophisticated security model. It creates users and roles(which are similar to Access groups), and again this is independent of Access security.
Our solution was to still use the Access workgroup file security along with the Oracle security model. By using the Access userid and then creating a similar Oracle userid with similar table rights granted in Access, you could apply security within Access and also with the Oracle database.
For example, a user BOB logs into Access via the workgroup file, using VB code, Access then establishes a Oracle connection logining into Oracle using the same unique userid BOB into Oracle.
After connecting and validating user BOB into Oracle, then the Access tables are relinked to Oracle using the user BOB userid and table rights.
This Oracle userid has been granted table rights specific for this userid.This allows the user BOB to use the Access application and still be authenticated into the Oracle database.
The problem with this solution is that the relinking of the saved Access tables takes 3-7 minutes for about 100+ tables. This is not acceptable for users each time they log into the application.
Our current alternative is to use one Oracle userid to login each user, and use Access form restrictions/security to allow/prevent users from updating/viewing data. Obviously, this is not the optimal solution in respect to security, but it at least allows us to control access to the data(via the forms) by using one logon required for each user, and quick startup time for the application.
I understand SQL server does a better job in integration, but we use Oracle which is what I am trying to work with.
Larry

How can i configure Distributed cache servers and front-end servers for Streamlined topology in share point 2013??

my question is regarding SharePoint 2013 Farm topology. if i want go with Streamlined topology and having (2 distribute cache and Rm servers+ 2 front-end servers+ 2 batch-processing servers+ cluster sql server) then how distributed servers will
be connecting to front end servers? Can i use windows 2012 NLB feature? if i use NLB and then do i need to install NLB to all distributed servers and front-end servers and split-out services? What will be the configuration regarding my scenario.
Thanks in Advanced!

For the Distributed Cache servers, you simply make them farm members (like any other SharePoint servers) and turn on the Distributed Cache service (while making sure it is disabled on all other farm members). Then, validate no other services (except for
the Foundation Web service due to ease of solution management) is enabled on the DC servers and no end user requests or crawl requests are being routed to the DC servers. You do not need/use NLB for DC.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Lync 2013 Enterprise load balancing on the front end and edge pool

Hi,
I am setting up a Lync 2013 Enterprise deployment consisting of a Front End pool (x2 FE servers) and an Edge pool (x2 Edge servers). I'm seeing some conflicting advice regarding load balancing using hardware or DNS for the front end and the edge.
On the front end I have 2 internal DNS records 'lyncfepool1.contoso.local' each of which map to one of the IPs of the FE servers. I've used my details to populate the Detailed Design Planner excel spreadsheet and am told that I require a HLB to load
balance my front end pool. I'm aware of the need to load balance HTTPS traffic internally (which will be done by TMG) however other traffic to the front end (SIP, etc) can be balanced by DNS only, and not require a HLB?
Can someone clarify the front end requirement?
Also - looking now at the edge pool - this site again have two edge servers in a pool. We are using a total of six private IP addresses, two per edge service (2 x av.contoso.com, 2 x sip.contoso.com and 2 x webcon.contoso.com). These will be
NAT'ed by the external firewall and directed to the respective external (DMZ) IP addresses on the Edge servers on port 443. I know this isn't true roundrobin due to the intelligence of the Lync client when connecting (in that the Lync client will connect
to one of the public IPs and if it can't connect, it will know to connect to the other service IP), however I want to clarify this set up, particularly the need to direct the external public IP traffic at the DMZ Edge IP specified in the topology builder.
I've attached a basic diagram of the external/DMZ/Edge side which hopefully helps with this question
Persevere, Persevere, Per..

That is because you will always need HLB for a front-end server since it hosts the Lync webservices which use HTTP/HTTPS traffic.
The description on the calculation tool also describes this correctly:
Supports Standard and Enterprise pools (up to 12 nodes), with pure device-based load balancing or a combination of DNS load balancing and device-based load balancing (for
Lync web services)
You can use either Hardware or DNS loadbalancing for SIP traffic only, but you will always need a HLB for the webservices. Both are applicable for the Front-End so you have either
full HLB for both SIP and HTTP(S) traffic
DNS LB for SIP traffic and HLB for HTTP(S) traffic
Hope this is more clear :-)
Lync Server MVP | MCITP Lync Server 2010 | If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.

Lync 2013 updating databases after updating Front End servers

We have a front-end server pool consisting of 3 Lync 2013 servers and a back end of 2 SQL servers using SQL mirroring. All servers are Windows 2008 R2.
Following the instructions in
http://support2.microsoft.com/kb/2809243 , I verified that the servers were all ready for updates, then I ran the
Stop-CsWindowsService -Graceful cmdlet to stop the Lync services on the first FE server, then I ran LyncServerUpdateInstaller.exe to install the updates. After the updates were installed, I restarted the server, waited for Lync services
to all start, then repeated the process on the next 2 servers in turn. This was all successful.
I am now looking at step 2 in this document, applying the back-end database updates, and I have a problem and some questions. The problem is that all the databases had the principal copy on the mirrored SQL server. I ran the recommended Invoke-CsDatabaseFailover
-NewPrincipal Primary cmdlet repeatedly, using all the database types I could find, but I still have two databases (database names
xds and lis) on the mirrored server. Since the cmdlet requires a database type, what type of databases are the xds and the lis databases?
Once I get that done, I an still unsure of exactly what to run to update the databases. The KB article states to run Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose .  Do I type this in exactly
as stated, or is FEBE.FQDN a variable for our SQL server or some other entity in our environment? If I do use the actual SQL Server name in that, do I run it twice, using the name of the mirrored SQL server the second time?
Thank you very much for your help.

Hi Logan Burt,
Central Management store database files
Data file or log purpose
                Xds.ldf
Transaction log file for the Central Management store
                Xds.mdf
Maintains the configuration of the current Lync Server 2013 topology, as defined and published by Topology Builder
                Lis.mdf
Location Information service data file
                Lis.ldf
Transaction log for the Location Information service data file
And you could verify if Lync Server 2013 database updates have completed successfully.
How to Verify if Lync Server 2013 Database Updates Completed Successfully
http://blogs.technet.com/b/dodeitte/archive/2013/07/02/how-to-verify-if-lync-server-2013-database-updates-completed-successfully.aspx
Best regards,
Eric

Lync 2013 Front End SIP/2.0 500 Compression algorithm refused

I've deployed a brand new Lync 2013 environment hosted on Windows Server 2012 R2 that is currently in co-existence mode with my Lync 2010 environment.
I have SCOM 2012 monitoring the environment and it recently started reporting that one or more of my front end servers
was in a critical state. Diving into it revealed the following perf counter threshold was being tripped:
Time Sampled: 3/26/2014 2:33:30 PM
Object Name: LS:SIP - Responses
Counter Name: SIP - Local 500 Responses
Instance Name:
First Value: 14287
Last Value: 14340
Delta Value: 53
Using OCSLOGGER.exe on the front end to capture logs, i trapped the following:
TL_INFO(TF_PROTOCOL) [11]9138.1C58::03/26/2014-19:12:39.098.0022c780 (SIPStack,SIPAdminLog::ProtocolRecord::Flush:ProtocolRecord.cpp(265))[120713120] $$begin_record
Trace-Correlation-Id: 120713120
Instance-Id: 7D80EB
Direction: outgoing;source="local"
Peer: poolA.contoso.com:63820
Message-Type: response
Start-Line: SIP/2.0 500 Compression algorithm refused
FROM: <sip:poolA.contoso.com>;ms-fe=FEserver1.contoso.com
To: <sip:poolA.contoso.com>;tag=F8B88CAB38613EB380773027C56D94AF
CALL-ID: 986f9f568c794ce39d33d7158376157b
CSEQ: 1 NEGOTIATE
Via: SIP/2.0/TLS 10.154.228.225:63820;ms-received-port=63820;ms-received-cid=C3D7C00
Content-Length: 0
ms-diagnostics: 2;reason="See response code and reason phrase";HRESULT="0xC3E93C0F(SIP_E_REACHED_CONFIGURED_LIMIT)";source="FEserver1.contoso.com"
Server: RTC/5.0
$$end_record
The only recent change made to the front end servers was making the registry change outlined in this article:
http://support.microsoft.com/kb/2901554/en-us so i'm wondering if that has something to do with it.

The MSFT support person said to re-apply CU5 to the Director servers and reboot. Since this is impactful to the environment and I would have to do reboots anyway, I opted to go the route of installing the more recent update so....
Last weekend I updated my Lync environment with what I think is considered CU6, the September 2014 updates for Lync 2013 Server (https://support.microsoft.com/kb/2809243) and still no luck. The front
end servers are fine; no excess SIP 500 errors occurring there but within 30 minutes of removing the SCOM override on the Director servers the alerts started firing again.
I reinstated the override in SCOM for the Directors and had my case with Premier support un-archived. The MSFT support person said if the alerts didn't go away she was going to have to engage the Lync product group for help. We'll see where it
goes from here.
JKuta

Front-End Service Starup Error: Store procedure to GET progress vector failed.

Hi,
We have a two front end servers in our Lync deployment and I'm getting an interesting error message on one of the servers when the "Lync Server Front-End Service" is starting up. All the services on that server will eventually start but I'm pretty
sure it's affecting users in some way.
Here is the error message in the Event Viewer:
Log Name:      Lync Server
Source:        LS User Services
Date:          2013-09-17 8:00:32 AM
Event ID:      32194
Task Category: (1006)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      BGC-VAN-LYNC2.domain.ca
Description:
Store procedure to GET progress vector failed.
Execution Error: 0x00000000(ERROR_SUCCESS).
Native Error: 8144.
Error Details: [# [Microsoft][SQL Server Native Client 11.0][SQL Server]Procedure or function SyncReplicationGetProgressVector has too many arguments specified. #].
Cause: This may indicate a problem with connectivity to local database or some unknown product issue.
Resolution:
Ensure that connectivity to local database is proper. If the error persists, please contact product support with server traces.
Event Xml:
<Event xmlns=>
<System>
    <Provider Name="LS User Services" />
    <EventID Qualifiers="50158">32194</EventID>
    <Level>2</Level>
    <Task>1006</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-09-17T15:00:32.000000000Z" />
    <EventRecordID>16971</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>BGC-VAN-LYNC2.domain.ca</Computer>
    <Security />
</System>
<EventData>
    <Data>0x00000000(ERROR_SUCCESS)</Data>
    <Data>8144</Data>
    <Data>[# [Microsoft][SQL Server Native Client 11.0][SQL Server]Procedure or function SyncReplicationGetProgressVector has too many arguments specified. #]</Data>
</EventData>
</Event>
The error happens 15 times every minute, following with this event:
Name:      Lync Server
Source:        LS User Services
Date:          2013-09-17 8:23:46 AM
Event ID:      32189
Task Category: (1006)
Level:         Information
Keywords:      Classic
User:          N/A
Description:
The following Fabric service for routing groups have been closed:
{F515134C-71B7-52FD-B0C3-6A9DB39CF750}
{8A5D6B36-2A01-53DB-BC4E-3286C05E0836}
{B35AAFC9-F6BF-5FFE-8C31-4AA5C36B2065}
{69223418-78DC-5066-81A8-78E05914EC7B}
{80414C96-1137-5DDC-8387-C3EA7A54B078}
{641E6ABD-B862-55A1-B1B1-C83BC92D2F85}
{1EA68EA4-77F7-5CFC-B781-0093CBC18403}
{2FDE333D-FF7F-5D6A-B85B-93ADC1EAC12A}
{A43BBA3A-8963-51C4-BD7A-19E1EC3DDFDB}
{D3F4532F-61C8-5072-9B3B-3E2CCF15442F}
{4449243E-5E96-56AC-AB6B-C5E785543542}
{58B30261-65B6-5F6A-BC50-60F85782D052}
{DB4B76B0-2510-5BF8-A7B1-8B37BD3AA7B9}
{917CC217-966B-56AC-A912-97BA64BA13EB}
Anyone knows what this is about and how to resolve this?
Thanks,
VH.

Hi,
Please try to reset registrar state:
http://tsoorad.blogspot.in/2013/04/lync-2013-ee-pool-wont-start.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

2 edge servers and 2 front end servers?

Good morning/afternoon/evening Technet,
We're about to go to production with Lync 2013 standard with the following.
1. 2 front end servers w/ standard edition
2. 2 edge servers
We want to set it up so that 1 front end and 1 edge server will be at a location of ours a couple miles away. We want to setup the other front end and edge server at our main office. For disaster recovery purposes I know that I can keep the two front ends
pooled but as far as the Edge servers go, would it be best to have 1 active and the other edge turned passive? Is there a way that I can put the two edge servers in the same pool?
Thanks for all the help guys and gals!
-Liqsh0t

Hi,
Each Site can use a separate Edge Server to support external login process.
However, it is possible to use single Edge server for both pools. The user from the other site has to connect to the only edge and then route though the WAN link to go to its own pool. Access Edge is responsible for proxying SIP traffic for remote clients
to the next hop, which can be a Director or a Lync pool.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Route Finder Front End

Similar Messages

Maybe you are looking for