Router Linksys WRT54G not working. Please help!
My router stopped working yesterday. I suddenly had no internet connection, and I initially thought it was due to my internet provider. So I contacted them and after some tests, I connected my cable modem to the ethernet adapter of my PC, restarted the modem, and the internet connection was restored. So, the problem was in my router.
I'm trying again to connect the router (cable modem --> router ---> ethernet card in my pc) but it doesn't work.
I also uninstalled my firewall in case it was somewhat blocking the router, and updated its firmware to the last version. But still, it doesn'taccess the internet. I can access the router configuration via http protocol as usual but I have no idea what else to do.
Could you please give me a hand?
Have you tried resetting the router after upgrading the firmware not then, Press and hold the reset button for 30 seconds...Release the reset button..Unplug the power cable from your router, wait for 30 seconds and reconnect the power cable..Now reconfigure your router...
Go to Setup Page of Linksys and Under setup tab, Click on Mac Address Clone,Check enable and click on "Clone Your PC's Mac " and Click on Save setting.Now turnoff computer,router and the cable modem....wait for 1 minute and turn-on the modem,wait for 2 minute and then turn ON the router and restart the computer..It should work now !!!!
Similar Messages
-
WRT54G not working please help.
I have a blinking power light on mt WRT54G v3 i manged to ping it and get all 4 replys back but im trying to upgarge the firmware with tftp and it will come back saying "unable to get responses from the server"
Can anyone help?yes but it will not load. When i try to upgrade the firmware it will say "earsing" but then it will say "unable to get responses from the server"
I guess its a brick now -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me
I would imagine your iPhone was hacked to make it work on your local carrier.
Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply -
HT1414 my handsfree is not working please help me
Hi There!
I am using Iphone 4s and ny handsfree in not working please help meTry restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo.
-
I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration
Contact the email provider and obtain the correct setup information.
-
The built-in mic in g50 122ca laptop model is not working. please help me out.
the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)
here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report". -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
The click at touchpad is not working, please help!!!
I use Macpro, recently the click at touchpad is not working, please help!!! Thank you !!
For this issue AppleCare support told me to so a SMC reset as follows:
Power the machine OFF.
At the SAME TIME hold down the following buttons:
Shift
Control
Option
Power
Then release all buttons. Power up the Macbook and see if the trackpad button work.
Hope this helps.
Bill -
hi
i tried to update to ios 8.2 on my iphone 5s when message popup to me now my iphone not working, please help i dont want to lose my dataWhat is the exact text of the message you got? And did you not back up before you updated?
Maybe you are looking for
-
Getting time_out Error in report bcos of SQL Statement!
Hi Experts, I am getting Time_out error in my big program because of Select statement.I have checked in SQL Trace AND fuond the message "SQL0104N An unexpected token "vakey" was found following "umh kschl". Expected tokens may include: ",". S
-
Why does this code fail in command line?
I am using the "ListDemo" from the java swing tutorial. If I compile it on the command line javac ListDemo.java It compiles fine. Then when I run it, it says: C:\Development\Java\Projects\Projects>java ListDemo Exception occurred during event dispatc
-
Hi, I am working on reconslation report. one customer may have any number of GL accounts(Hkont) cosnsider the below example i have customer 1 is having the gl accounts 100,101,102,103 and grand total for all the gl accounts in some cases customer ma
-
SAP NetWeaver 7.0 Java Trial Version
Hi all, less then one month ago I bought the book "Developers's Guide to SAP NetWeaver Portal Applications" on sap-press.com. According to the chapter 2, to enable the reader to reproduce the examples, it's suggested to install a local portal en
-
Portal 3.0.8 - Solaris. I'm adding item to my content area and everything looks good until the item is submitted. It is then not shown on my CA page. If I create a new CA page the items will appear. But then the same thing happens all over again when