Router not being acknowledged in any way and sad about it.

I have a BEFW11S4 Version 2 Wireless Router/Access Point. I have an HP laptop running Windows XP. I have a T.com (German Version) wireless DSL modem. I am able to connect to the internet wirelessly through my modem. I have followed the instructions that came with the router and the EasyLink Advisor instructions. Each time I followed the instructions I was wired from my computer to the router and the router was wired to the modem. EasyLink stated that it could not detect an internet connection (I had and have one) and it could not detect the router. On my router, these lights are lit: WLAN Link, Power, Link/Act, Full Col, 100 (in orange) [above the number 1], Link. On occassion, the Act and Link/Act lights flash. Also, my computer detects a LAN of 100 Mbps when I am wired to the router and it is disconnected when I disconnect my router or unplug it.
So, please help. It seems that all should be working, but, well, it's not.

I kinda had the same problem with my WRT54G v5 router i think but I'm not sure how yours is setup. It says its connected but it doesn't go online. The way I fixed it is that my modem changes its IP Address every time I turn off the power. So I found out the new IP Address of the modem and put if in my router. I did it by going to http://192.168.1.1 but yours might be different and I put the setup to Static IP and put in everything that my modem provided me with.
To find the IP and gateway address attach your modem to your PC and go to Start>RUN then in the RUN box type in CMD. A black box should appear and then type in IPCONFIG /ALL and then it should give you your information about your modem then connect your modem to the router and the PC to your router. Go to the Router Setup and input the information that was given from your modem. It should work, how I got mines to work.
To safely exit out of the black box type EXIT.

Similar Messages

  • How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

    How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

    You can prevent it from being printed by applying a security policy to it
    in Acrobat. The rest can't be prevented, unless you spend  a LOT of money
    on DRM protection.

  • HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

    my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
    It seems to me that the connection port is faulty.
    George

    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?

    My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?
    Before I updated to OS X Mavericks I was using another external disk that was getting disconnected ocasionally so I bought a new ADATA HD710 portable 1TB Drive and moved the files to it. This new drive which is supposed to be OS X Mavericks compatible takes minutes to show the files especially when opening second and third level folders which has made mu iMac unusable
    What should I do?

    Your Mac should be able to recognize many different types of drives (including Windows-formatted drives) immediately for Reading, provided they are in good working condition and not damaged. There should be no need to transfer to a different type of drive.
    If there is no recognition of this drive, see if it can be seen in Disk Utility.
    If your aim is to transfer the data on it DO NOT use ERASE or PARTITION as these will completely erase all the information on the Drive.
    If the drive is present while the Mac sleeps, it is likely to drop out and not be seen any longer, especially if it is a USB-powered drive.

  • My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

    My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.  I've since deleted this podcast with no luck.  I've restarted both the phone and the computer, still no luck.  One computer is running Vista and the other Windows 7, both have the latest Itunes Update.  Anyone have a fix for this?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again?

    I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again. If I go to attempt to rebuy it, then it says thhat I technically already bought it but it won't download.

    Audiobooks are not available for redownloading, so you need to transfer them from your old computer, or get them from your backup. How did you copy your iTunes contact from your old computer to our new one?
    Regards.

  • I haven't used my i-pod in forever and forgot the password! It was disabled but is currently not. Is there any way I can delete the password on the computar instead of going to a Apple store? Please help:)

    Dear I-pod users,
        I haven't used my i-pod in a long time and I forgot the password It was disabled after countless tries but right now is not disabled.Is there any way I can delete  the password on the computar instead of going to the Apple store? ALSO, I believe my I-pod is a second generation (no camera) PLEASE HELP!!!

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    For how to restore:
    iTunes: Backing up, updating, and restoring iOS software

  • My daughter did factory reset on 4 s and lost her notes.  Important stuff in notes. Is there any way she can get them back?

    My daughter did factory reset on 4 s and lost her notes.  Important stuff in notes. Is there any way she can get them back?

    Did she do a backup first? Did she have iCloud backup turned on?

  • I bought my iPhone5 4 months ago and now the camera is not working, it only displays black in the screen. I've tried reset, restore for how many times but still the problem is not being resolve. Any help from you Apple team?

    I bought my iPhone5 4 months ago and now the camera is not working, it only displays black in the screen. I've tried reset, restore for how many times but still the problem is not being resolve. Any help from you Apple team?

    There is no Apple here, this is a user to user forum.  When you said you restored, then you restore as NEW?
    If you restored as New and still the problem persiist, then it time to take a trip to the Apple store.

  • Check boxes are not being displayed in any list applets

    Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
    I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
    Thanks in advance

    One way that you could make it work (just tried it out again) is to use the windings font
    and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
    C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
    (depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
    There is an example file: xdo example.cfg that you rename and change accoringly.
    The font is there setup for windows 2000 as an example. Select the correct font
    path - for my XP it is:
    <font family="Wingdings" style="normal" weight="normal">
    <truetype path="C:\WINDOWS\fonts\wingding.ttf" />
    </font>
    Then you can put the symbols into your RTF template and it will be rendered.
    At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
    I am pretty sure I tried it before with 5.5.
    Didn't have the 5.5 manual with me - so I have to check what that says again..
    Hope it helps,
    Klaus

  • Bt vh410 is not being detedcted by any phone

    I bought a bluetooth VH 410 few weeks back and now it is not being detected by any phone.
    It switches on normally and then no phone is able to detect it or pair with it.
    I already made sure that the phone visibility is show to all and still it is not pairing.
    Please help !
    Is there any way to reset it?
    Thanks !

    The headset LED should be blinking red and green when it has entered pairing mode, is it doing that?
    The procedure to set it in pairing mode is to, while the headset is turned off press and hold the on/off key until it's starts to blink like I said above.
    If you've got this right you should be able to pair it with a phone. But if you're not able to pair it with any phone in this mode it must be something wrong with the headset. In that case check if you can get it fixed within warranty by calling your local support team.
    http://www.sonyericsson.com/cws/corporate/common/contact/phonelist
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My Mac Air iphoto will display thumbnails but will not display photos in any way - single photo / slideshow etc - any ideas

    My Mac Air iphoto will display thumbnails but will not display photos in any way - single photo / slideshow etc - any ideas?

    Are you seeing this
    when you double click on a thumbnail file?  If so it's an indication that the file path/link between the thrumbnail and original, full sized file has been broken.  Therefore, and assuming you're running iPhoto 9 or later, try the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
    2 - Run Option #4, Rebuild Database.
    OT

  • Notifications are not being generated for any emails that have rules applied to them.

    Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

    In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
    that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria.  PLease check
    1) whether your rule has trun on alert supression
    2) Close the alert, craised by rule,  and do it again
    Roger

  • I accidentally deleted a very important page in my NOTES.  Is there any way to retrieve this?

    I accidentally deleted an important page in NOTES.  Is there any way to retrieve this?

    If you have backed up the iPad since you created that page of notes and if you have not synced since, you can try restoring the iPad from a backup. Remember that the notes do have to be in the backup and when you restore from a backup, you restore all app data and files from that backup. You cannot select specific content to restore to the iPad. It is all or nothing.
    If you want to try this, turn off auto sync in iTunes - without the iPad connected to the computer. Launch iTunes and go to Edit>Preference>Devices>Prevent iPods, iPhones and iPads from automatically syncing. Check the box at the bottom, click OK. Make sure that you have a backup in that window as well. Click OK and quit iTunes.
    Now connect the iPad and launch iTunes. Right click on the iPad name on the left and select  - Restore from Backup. Select your backup from the window - Let the iPad restore and then sync with iTunes.
    you can turn at sync back on again when you are done.

  • I have an iPad 3 or the new iPad with the normal charger.. my iPad is not starting is there any way to format it? if not will the apple guys be able to access my data?

    I have an iPad 3 or the new iPad with the normal charger.. my iPad is not starting is there any way to format it? if not will the apple guys be able to access my data?

    Honestly, I don't think that they have any other way of accessing anything on the iPad than any other user has. The Apple Store genius will just put the device through the standard troubleshooting steps - in your case probably try to restore the device to factory settings and if that doesn't work, then they will make some sort of offer for a replacement assuming that your iPad is still under warranty.
    If I'm not mistaken they will probably erase the device in order to try to "fix" it. That's what restoring to factory settings does. I assumed that you were concerned about losing data - but if you are concerned that they are going to see something that you don't want them to see or access, I'm pretty sure that's not going to happen.

Maybe you are looking for